Proximity Sensors

In this interactive PDF

you can:

Section 18

Photoelectric Sensors
Section 19

Use bookmarks to
navigate by product
category

Use bookmarks to
save, search, print
or e-mail the catalog
section

IEC Limit Switches

Section 20

Encoders
Section 21

Current Sensors
Section 22

Pressure Sensors
and Gauges
Section 23

Temperature Sensors
and Thermometers
Section 24

Sensors

Click on part #s
to link directly to
our online store for
current pricing,
specs, stocking
information and
more

Ultrasonic Level Sensors

Section 39

Volume 14

e23-1

Reliable process measurement for less ProSense Pressure Sensors

Digital Pressure Switch/Transmitter QPS Series

all models
$

69.00

Three operation modes: Easy, Window

and Hysteresis
3-color digital LCD display
6 pressure unit conversions
Lockable keypad
Optional panel mount and bracket kits

Precision digital pressure switch/transmitter

with 2 meter cable
Two digital outputs (NPN or PNP) which may
be set individually and a
4-20 mA analog output
Two vacuum to pressure ranges (-14.5 to 14.5
and -14.5 psi to 145 psi)
Air, non-corrosive/non-flammable gases only

MPS25 Series Mechanical

Pressure Switches

Electronic Pressure Switch

PSD25 Series

all models
$

89.00

Simple setup using mechanical

adjustment dials
Durable housing with 316
stainless steel process connection
Pressure ranges up to 5800 psi
M12 quick disconnect electrical connection
LEDs indicate switching and operating
status
Complementary switching outputs
(N.O./N.C.), 500 mA DC
Easy set-up dials
Vibration and shock-resistant

starting at
$

Pressure and Vacuum Transmitters

all models
$

125.00

82.00

316 stainless steel housing

All stainless welded diaphragm or
stainless piston and Buna-N O-ring
Pressure ranges from-15 psi vacuum
to 7500 psi
Tamper resistant field adjustment
Integral 6-foot cable with 1/2 inch NPT
male conduit connection, or DIN formC
electrical connections
1/4 inch NPT male process connection
Wide operating temperature range
Precision snap-acting SPDT, 3 Amp
mechanically operated switch

starting at
$

starting at
$

109.00

105.00

PTD25 Series Features

SPT25 Series Features

DPTA Series Features

Ceramic sensing element with Viton seals

High over pressure ratings
Pressure ranges from vacuum to 5000 psi
1/4 inch NPT male threaded process
connection
Output options: 4-20 mA or 0-10 VDC
M12 quick disconnect electrical connection
UL508 listed, CE marked
3 year warranty

All stainless steel wetted parts

Pressure ranges from vacuum to 5000 psi
Fast response time of <1ms
Output options: 4-20 mA or 0-10 VDC
Integral 6.6 ft cable or DIN connector
Made in USA
$115 with integral cable,
$109 with DIN connector

Differential pressure measurement with

a highly stable capacitive sensing element
Positive, negative, and bi-directional
pressure measurement
Pressure ranges from 0.1w.c. to 25w.c.
Accuracy is +/-1% of span maximum
High overpressure rating of 15 psi
LED loop power status indicator
Made in USA
3 year warranty

starting at
$

6.00

Volume 14

e23-2

Sensors

Mechanical Dial Pressure Gauges

with 1.5", 2.0" and 2.5" Diameter Dials
Available in durable steel or stainless
steel cases and in either dry or liquid
filled models. (Liquid filled gauges
dampen the effects of vibration and pulsations).
Brass wetted parts are suitable for air,
oil, or water pressure gauge applications.

Stainless steel wetted parts are available for use in pressure gauge applications for corrosive materials.
Dual marked gauge dial faces (psi/kPa
or inHg/kPa) are available in pressure
ranges from vacuumup to 6000 psi.
5 year warranty
1 - 80 0 - 633 - 0405

PSD25 Series Pressure Switches

Features

Compact pressure switch features simple

setup using mechanical adjustment dials
Extremely durable housing with 316
stainless steel process connection
No moving parts ensure long-term stability
without setpoint drift
LEDs indicate switching and operating
status
Complementary switching outputs
(N.O./N.C.), DC
Easy set-up dials
Vibration and shock-resistant

Agency Approvals

cULus, File number E320431

CE
RoHS

Soft
Starters

Description
Pressure switch, DC, PNP NO/NC, 7.5 to 145 psi range, 1/4 NPT male port

0.21

<--->

PSD25-0P-1450H

Pressure switch, DC, PNP NO/NC, 75 to 1450 psi range, 1/4 NPT male port

0.21

<--->

PSD25-0P-5800H

Pressure switch, DC, PNP NO/NC, 290 to 5800 psi range, 1/4 NPT male port

0.21

<--->

(order separately - see Proximity

Sensor section for cable specs)

Pcs/Pkg Wt(lb) Price

Cable Assemblies

0.01

<--->

PSD Series Sensors

CD12L-0B-020-A0
CD12L-0B-020-C0
CD12M-0B-070-A1
CD12M-0B-070-C1

Accessory
Note: Check the chemical compatibility of the sensors wetted parts with the medium to be measured.

9.6 to 32 VDC

Steppers/
Servos
Motor
Controls
Proximity
Sensors
Photo
Sensors

Encoders

Gold-plated

Current
Sensors

500 mA - See Setting and Operation Guide on following page.

< 25 mA

Pressure
Sensors

100 Hz
< 2.5% of full range (limit point calibration)
< 0.5% of full range

Temperature
Sensors

< 0.5%, of full temperature range/10 K;32 to 176F (0 to 80C).

PBT (Pocan); PC (Makrolon); FPM (Viton); stainless steel (316S12)

Pushbuttons/
Lights

Stainless steel (316S12)

13 to 176F (25 to 80C)

Process

13 to 176F (25 to 80C)

Relays/
Timers

40 to 212F (40 to 100C)

IP 67

Comm.

III
> 100 M (500 VDC)

Terminal
Blocks &
Wiring

50g (DIN / IEC 68-2-27, 11ms)

20g (DIN / IEC 68-2-6, 10 - 2000 Hz)

Power

4 kV/8 kV AD

Circuit
Protection

10 V/m
2 kV

Enclosures

10 V

Applications (Type of Pressure: Relative Pressure, Liquids and Gases)

PSD25-0P-5800H
PSD25-0P-1450H
PSD25-0P-0145H

Motors &
Gearbox

Limit
Switches

ProSense PSD25 Series Technical Specifications

Part Number

Field I/O

Drives

PSD25-0P-0145H

Operating Voltage
Connection Pin Material
Output Maximum Load Current
Current Consumption
Switching Frequency
Setting Accuracy of Switch Points
Repeatability
Temperature Drift
Housing Material
Materials (wetted parts)
Operating Temperature
Medium Temperature
Storage Temperature
Protection
Protection Class
Insulation Resistance
Shock Resistance
Vibration Resistance
EMC
EN 61000-4-2 ESD
EN 61000-4-3 HF Radiated
EN 61000-4-4 Burst
EN 61000-4-6 HF Conducted

Programmable
Controllers

C-more &
other HMI

Part Number

Transparent plastic protective cap for PSD series

Systems
Overview

Software

ProSense Series Pressure Sensors

PSD-CV

Company
Information

Bursting Pressure

Setpoint Scale

Resetpoint Scale

bar (PSI)

bar (PSI)

Permissible Overload
Pressure
bar (PSI)

20 to 400 (290 to 5800)

12 to 392(175 to 5685)

600 (8700)

1600 (23200)

5 to 100 (75 to1450)

3 to 98 (50 to 1420)

200 (2900)

1000 (14500)

0.5 to 10 (7.5 to 145)

0.3 to 9.8 (5 to 142)

25 (362)

300 (4350)

bar (PSI)

Note: Full vacuum permisible

WARNING! AVOID STATIC AND DYNAMIC OVERPRESSURE EXCEEDING THE GIVEN OVERLOAD PRESSURE.
EXCEEDING THE BURSTING PRESSURE FOR EVEN A SHORT TIME CAN CAUSE DESTRUCTION OF THE UNIT AND POSSIBLE INJURIES!
Volume 14

w w w. a u to m a t i o n d i re c t . c o m / p res s u re - s e n s o rs

Sensors

e23-3

Tools
Pneumatics
Safety
Appendix
Product
Index
Part #
Index

PSD25 Series Pressure Switches

Switch Dimensions

Switch Cover Dimensions

30
[1.16]

70.4
[2.77]

29.9
[1.18]

60.5
[2.38]

48
[1.87]
13.4
[0.53]

12.0
[0.47]

47.5
[1.87]

Note: tightening torque 25 Nm (18.4 lb-ft)

PSD25 Wiring Diagrams

Dimensions shown mm [inches]

Cable Assembly Wiring Colors:

Pin 1 - Brown
Pin 2 - White
Pin 3 - Blue
Pin 4 - Black
Note: wiring colors are based on
AutomationDirect CD12L and CD12M 4-pole
cable assemblies.

PNP

Setting and Operation

1.
2.
3.
4.
5.
6.
7.

locking ring
setting rings (manually adjustable after unlocking)
LED green: supply voltage O. K.
process connection NPT; tightening torque 25 Nm
setting marks
LED yellow: Set value reached, OUT1 = ON / OUT2 = OFF
internal thread M5

Minimum distance between Set and Reset = 2% of the final value of the
measuring range.
To obtain the setting accuracy: Set both rings to the minimum value, then set
the requested values.

Volume 14

e23-4

Sensors

1 - 80 0 - 633 - 0405

MPS25 Series Mechanical Pressure

Switches

The ProSense MPS25 series mechanical pressure switches are designed for the toughest
applications where conventional pressure switch designs often dont measure up. These
cost effective switches, depending on the pressure range, have either an all welded 316
stainless steel sealed diaphragm actuator design or a direct acting 316 stainless steel
piston design with a Buna-N O-ring. The rugged 316 stainless steel enclosure provides
uncompromising protection and long life in difficult environments. The robust design is
resistant to vibration and shock, and provides reliable operation over a wide operating
temperature range. Pressure ranges from vacuum to 7500 psig are available along with
a inch NPT male threaded process connection and a precision snap-acting SPDT, 3
Amp, mechanically operated switch output. Choose from either an integral 6-foot (1.5m)
cable with inch NPT male conduit connection or a DIN 175301-803C L-connector.

Applications

Process control & automation

Pump & compressor control
Hydraulic systems
Pneumatic systems
Engine monitoring
Presses
Machine tools

#E320431
* UL only applies to the MPS25 series
units with integral cable

Features

Compact size
316 stainless steel enclosure
All stainless welded diaphragm or stainless
piston and Buna-N O-ring
Pressure ranges from -15 psi vacuum to 7500 psi
Tamper resistant field adjustment
*Integral 6-foot cable with 1/2 inch NPT male conduit
connection or DIN form C electrical connections
1/4 inch NPT male process connection
Wide operating temperature range
Precision snap-acting SPDT, 3 Amp mechanically operated
switch
UL*, CSA, CE and RoHS compliant
3-year warranty

MPS25 Series Mechanical Pressure Switches

Part Number

Description

MPS25-1C-DV15A

Pressure switch, -15 psi vacuum to 15 psi adjustable range, 1/4 NPT male port, 3A SPDT
switch output

MPS25-1C-D30A
MPS25-1C-D60A
MPS25-1C-D100A
MPS25-1C-P200A
MPS25-1C-P500A
MPS25-1C-P1000A
MPS25-1C-P2000A
MPS25-1C-P5000A
MPS25-1C-P7500A

Pressure switch, 6 to 30 psi adjustable range, 1/4 NPT male port, 3A SPDT switch output

Actuator
Type

Electrical
Connection

Pcs/ Wt(lb) Price

Pkg

316 stainless steel

welded diaphragm

Pressure switch, 8 to 60 psi adjustable range, 1/4 NPT male port, 3A SPDT switch output
Pressure switch, 10 to 100 psi adjustable range, 1/4 NPT male port, 3A SPDT switch output

1/2 NPT male

conduit connection, integral
6-foot (1.5 meter)
4 conductor cable
with 18 AWG leads

Pressure switch, 40 to 200 psi adjustable range, 1/4 NPT male port, 3A SPDT switch output
Pressure switch, 50 to 500 psi adjustable range, 1/4 NPT male port, 3A SPDT switch output

0.9

<--->

0.9

<--->

0.9

<--->

0.9

<--->

0.9

<--->

Company
Information
Systems
Overview
Programmable
Controllers
Field I/O
Software
C-more &
other HMI
Drives
Soft
Starters
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
Proximity
Sensors
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.

0.9

<--->

Pressure switch, 100 to 1000 psi adjustable range, 1/4 NPT male port, 3A SPDT switch output 316 stainless steel
piston with
Pressure switch, 200 to 2000 psi adjustable range, 1/4 NPT male port, 3A SPDT switch output Buna-N O-ring

0.9

<--->

0.9

<--->

Pressure switch, 500 to 5000 psi adjustable range, 1/4 NPT male port, 3A SPDT switch output

0.9

<--->

Pressure switch, 750 to 7500 psi adjustable range, 1/4 NPT male port, 3A SPDT switch output

0.9

<--->

Power

MPS25-1C-DV15D

Pressure switch, -15 psi vacuum to 15 psi adjustable range, 1/4 NPT male port, 3A SPDT
switch output

0.5

<--->

MPS25-1C-D30D
MPS25-1C-D60D
MPS25-1C-D100D
MPS25-1C-P200D
MPS25-1C-P500D
MPS25-1C-P1000D
MPS25-1C-P2000D
MPS25-1C-P5000D
MPS25-1C-P7500D

Pressure switch, 6 to 30 psi adjustable range, 1/4 NPT male port, 3A SPDT switch output

0.5

<--->

Circuit
Protection

0.5

<--->

0.5

<--->

0.5

<--->

0.5

<--->

Pressure switch, 100 to 1000 psi adjustable range, 1/4 NPT male port, 3A SPDT switch output 316 stainless steel
piston with
Pressure switch, 200 to 2000 psi adjustable range, 1/4 NPT male port, 3A SPDT switch output Buna-N O-ring

0.5

<--->

0.5

<--->

Pressure switch, 500 to 5000 psi adjustable range, 1/4 NPT male port, 3A SPDT switch output

0.5

<--->

Pressure switch, 750 to 7500 psi adjustable range, 1/4 NPT male port, 3A SPDT switch output

0.5

<--->

316 stainless steel

welded diaphragm

Pressure switch, 8 to 60 psi adjustable range, 1/4 NPT male port, 3A SPDT switch output
Pressure switch, 10 to 100 psi adjustable range, 1/4 NPT male port, 3A SPDT switch output
Pressure switch, 40 to 200 psi adjustable range, 1/4 NPT male port, 3A SPDT switch output
Pressure switch, 50 to 500 psi adjustable range, 1/4 NPT male port, 3A SPDT switch output

DIN 175301-803C
L-Connector
(8mm)

Volume 14

w w w. a u to m a t i o n d i re c t . c o m / p res s u re - s e n s o rs

Sensors

e23-5

Terminal
Blocks &
Wiring

Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index
Part #
Index

MPS25 Series Mechanical Pressure

Switches
ProSense MPS25 Series General Specifications
Setpoint
Setpoint Repeatability
Vibration
Shock
Piston Actuator
Mechanical Life Piston Design
Diaphragm Actuator
Mechanical Life Diaphragm Design
Enclosure Material
Enclosure Rating
Pressure Connection

1/4 NPT Male

Electrical Output

SPDT 3A @ 125 VDC / 2A @ 30 VDC resistive

Electrical Termination

1/2 NPT Male conduit connection or Micro DIN 175301-803C with mating connector

Agency Approvals

UL (#E320431) cable version only, CSA, CE, RoHS

Field adjustable (factory default 50% of full scale)

2% of range (Additional setpoint shift of 2% of range per 40F from initial setpoint set at 70F typical)
Passed ML-STD-202G
75Gs 10 milliseconds 3-axis
Stainless steel with Buna-N O-ring, 200 to 7500 psi
> 1,000,000 operations typical
316L SS, up to 100 psi
> 400,000 operations typical
316L SS
NEMA 6, IP 67

MPS25 Series Mechanical Pressure Switch Performance Characteristics

Part Number
MPS25-1C-DV15x
MPS25-1C-D30x
MPS25-1C-D60x
MPS25-1C-D100x
MPS25-1C-P200x
MPS25-1C-P500x
MPS25-1C-P1000x
MPS25-1C-P2000x
MPS25-1C-P5000x
MPS25-1C-P7500x

Setpoint Adjustability
psi
bar, kg/cm2
kPa

Setpoint Repeatability
psi
bar, kg/cm2
kPa

psi

Deadband*
bar, kg/cm2

kPa
7-35

-15/15

-1/1

-100/100

0.6

0.04

1-5

0.07-0.35

6-30

0.4-2

4-200

0.6

0.04

1-5

0.07-0.35

7-35

8-60

0.6-4

60-400

1.2

0.08

2-10

0.14-0.70

14-70
20-100

10-100

0.7-7

70-700

0.14

14

3-15

0.2-1.0

40-200

2.8-14

280-1400

0.28

28

3-30

0.2-2.0

20-200

50-500

3.5-35

350-3500

10

0.70

70

20-100

1.4-7.0

140-700

100-1000

7-70

700-7000

20

1.40

140

25-150

1.7-10

170-1000

200-2000

14-140

1400-14000

40

2.8

280

30-300

2-20

200-2000

500-5000

35-350

3500-35000

100

7.0

700

75-750

5-50

500-5000

750-7500

50-500

5000-50000

150

10.0

1000

110-1100

7.5-75

750-7500

* Linear over setpoint (For example, a 30 psi switch has a range of 6-30 psi, so the deadband at 6 psi setpoint is 1psi and at a 30 psi setpoint it is 5 psi., additionally
the MPS25-1C-DV15x psi switch has a range of -15 to +15 psi for this switch the deadband at -15 psi setpoint is 1 psi and at +15 psi setpoint it is 5 psi.)

Material & Temperature

Proof Pressure

Wetted Temperature
Material
Range

Ranges

Ranges
(listed in psi)

Burst Pressure

psi bar,
kg/cm2

kPa

Ranges
(listed in psi)

psi

Up to 100#

1000

70

7000

Up to 100#

>9500

bar,
kg/cm2

kPa

Up to 100#

SS

-40-100C
(-40-212F)

2000

140

14000

200#

>10000

>700

>70000

SS, BUNA

-28-100C
(-18.4-212F)

200#

200#

500 to 2000#

8000

500

55000

500 to 2000#

>30000

>2100

>210000

500# to 7500#

SS, BUNA

-40-100C
(-40-212F)

5000 to 75000#

15000

1000

100000

5000 to 7500#

>50000

>3500

>350000

Electrical Connections

>655

>65500

Wire Color / Function

Wire Color

Function

Red

Normally Closed

1/2 NPT male conduit connector with 6-foot

(1.5m) integral cable

White

Common

Blue

Normally Open

Green

Ground
DIN 175301-803C L-Connector

Volume 14

e23-6

Sensors

1 - 80 0 - 633 - 0405

Actuator Design

MPS25 Series Mechanical Pressure

Switches

The MPS25 series actuator responds to changes in pressure and operates the internal micro switch in
response to these changes. The actuator is normally exposed to the process media and must be
chemically compatible with it. The MPS25 series is available with a welded stainless steel diaphragm (no
O-ring) in pressure ranges up to 100 psi. A stainless steel piston with Buna-N O-ring is available for
pressure ranges from 200 to 7500 psi.

Company
Information
Systems
Overview
Programmable
Controllers
Field I/O
Software
C-more &
other HMI
Drives
Soft
Starters

Diaphragm

Motors &
Gearbox

O-Ring

Steppers/
Servos
Motor
Controls

Push Rod

Process
Connection

Diaphragm Actuator Type

Up to 100 psi

Push Rod

Proximity
Sensors

Process
Connection

Photo
Sensors

Piston Actuator Type

200 to 7500 psi

Limit
Switches
Encoders

Dimensions

Current
Sensors

inches [mm]

Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.

MPS25 Cable Units

Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Tools
Pneumatics

MPS25 DIN Connector Units

Volume 14

w w w. a u to m a t i o n d i re c t . c o m / p res s u re - s e n s o rs

Sensors

e23-7

Safety
Appendix
Product
Index
Part #
Index

MPS25 Series Mechanical Pressure

Switches

Field Adjustable Setpoint

The MPS25 series switches have a field adjustable setpoint. To adjust the setpoint, follow the instructions
in the diagram. The pressure switch operates as follows:

The Normally Open contact will close when the pressure is raised from 0 psi to the setpoint. The reset
point is then measured from the setpoint, reducing the pressure until the Normally Open contact opens.

ADJUSTMENT
COVER CLOSED

ADJUSTMENT
COVER OPEN

SLIDE COVER DOWN TO ACCESS

SETPOINT ADJUSTMENT SLIDE COVER
UP TO CLOSE AND SEAL ADJUSTMENT

SETPOINT
ADJUSTMENT
NUT (3/32 HEX
KEY OR 2MM
HEX KEY)

ROTATE LEFT <

TO INCREASE SETPOINT
>
ROTATE RIGHT
TO DECREASE SETPOINT
0 .095 OR SMALLER TOOL
REQUIRED TO ROTATE NUT

Volume 14

e23-8

Sensors

1 - 80 0 - 633 - 0405

PTD25 Series Pressure Transmitters

The ProSense PTD25 pressure transmitter series is engineered to meet many
industrial, commercial, and OEM pressure measurement applications. The
ceramic sensing element with Viton seals provides high over pressure ratings and
can be used to sense any compatible media. With a robust design resistant to
vibration, shock, and EMI/RFI, the PTD25 series provides high accuracy over a
wide compensated temperature range. Pressure sensing ranges from vacuum to
5000 psi are available along with a inch NPT male threaded process connection. Choose from linear outputs of 4-20 mA or 0-10VDC with a 4-pin M12
quick-disconnect plug electrical connection. The PTD25 series is UL508 listed,
CE marked and comes with a 3 year warranty.

Applications

Process control & automation

Pump & compressor control
Hydraulic systems
Pneumatic systems
Engine monitoring
Presses
Machine tools

Features

Ceramic sensing element with Viton seals

High over pressure ratings
Pressure ranges from vacuum to 5000 psi
1/4 inch NPT male threaded process connection
Output options: 4-20 mA or 0-10 VDC
M12 quick disconnect electrical connection
UL508 listed, CE marked
CE marked
3-year warranty

Company
Information
Systems
Overview
Programmable
Controllers
Field I/O
Software
C-more &
other HMI
Drives
Soft
Starters
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
Proximity
Sensors
Photo
Sensors
Limit
Switches

NOTE: CHECK THE CHEMICAL COMPATIBILITY OF THE SENSORS WETTED PARTS WITH THE MEDIUM TO BE MEASURED.
FOR GASEOUS MEDIA, LIMIT THE PROCESS PRESSURE TO 363 PSI (25 BAR) MAXIMUM.

ProSense PTD25 Series Pressure Transmitters

Part Number

Description

Pcs/Pkg Wt(lb) Price

PTD25-10-VH

Vacuum transmitter, 10 to 0 V output, -14.5 to 0 psi range vacuum, 1/4 NPT male port

0.48

<--->

PTD25-10-0100WCH

Pressure transmitter, 0 to 10 V output, 0 to 100 inches wc* range, 1/4 NPT male port

0.48

<--->

PTD25-10-0015H

Pressure transmitter, 0 to 10 V output, 0 to 15 psi range, 1/4 NPT male port

0.48

<--->

PTD25-10-0030H

Pressure transmitter, 0 to 10 V output, 0 to 30 psi range, 1/4 NPT male port

0.48

<--->

PTD25-10-0100H

Pressure transmitter, 0 to 10 V output, 0 to 100 psi range, 1/4 NPT male port

0.48

<--->

PTD25-10-0200H

Pressure transmitter, 0 to 10 V output, 0 to 200 psi range, 1/4 NPT male port

0.48

<--->

PTD25-10-0500H

Pressure transmitter, 0 to 10 V output, 0 to 500 psi range, 1/4 NPT male port

0.48

<--->

PTD25-10-1000H

Pressure transmitter, 0 to 10 V output, 0 to 1000 psi range, 1/4 NPT male port

0.48

<--->

PTD25-10-3000H

Pressure transmitter, 0 to 10 V output, 0 to 3000 psi range, 1/4 NPT male port

0.48

<--->

PTD25-10-5000H

Pressure transmitter, 0 to 10 V output, 0 to 5000 psi range, 1/4 NPT male port

0.48

<--->

PTD25-20-VH

Vacuum transmitter, 20 to 4 mA output, -14.5 to 0 psi range vacuum, 1/4 NPT male port

0.48

<--->

PTD25-20-0100WCH

Pressure transmitter, 4 to 20 mA output, 0 to 100 inches wc* range, 1/4 NPT male port

0.48

<--->

PTD25-20-0015H

Pressure transmitter, 4 to 20 mA output, 0 to 15 psi range, 1/4 NPT male port

0.48

<--->

PTD25-20-0030H

Pressure transmitter, 4 to 20 mA output, 0 to 30 psi range, 1/4 NPT male port

0.48

<--->

PTD25-20-0100H

Pressure transmitter, 4 to 20 mA output, 0 to 100 psi range, 1/4 NPT male port

0.48

<--->

PTD25-20-0200H

Pressure transmitter, 4 to 20 mA output, 0 to 200 psi range, 1/4 NPT male port

0.48

<--->

PTD25-20-0500H

Pressure transmitter, 4 to 20 mA output, 0 to 500 psi range, 1/4 NPT male port

0.48

<--->

PTD25-20-1000H

Pressure transmitter, 4 to 20 mA output, 0 to 1000 psi range, 1/4 NPT male port

0.48

<--->

PTD25-20-3000H

Pressure transmitter, 4 to 20 mA output, 0 to 3000 psi range, 1/4 NPT male port

0.48

<--->

PTD25-20-5000H

Pressure transmitter, 4 to 20 mA output, 0 to 5000 psi range, 1/4 NPT male port

0.48

<--->

*wc = water column

Volume 14

w w w. a u to m a t i o n d i re c t . c o m / p res s u re - s e n s o rs

Sensors

e23-9

Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index
Part #
Index

PTD25 Pressure Transmitters

ProSense PTD25 Series General Specifications
Housing Material

Stainless steel (316S12); FPM (Viton); PA; EPDM/X

(Santoprene)

Materials (wetted
Stainless steel (303S22); ceramics; FPM (Viton)
parts)*
Operating
13 to 176F (25 to 80C)
Temperature
Medium Temperature 13 to 194F (25 to 90C)
Storage Temperature 40 to 212F (40 to 100C)
IP 68 / IP 69K (Units with pressure range 1000 PSI and higher)
Protection
IP 65 (Units with pressure range 500 PSI and lower)
Protection
III
Protection Class
< 0.75% of full range
Accuracy
< 0.15% of full range
Repeatability
Insulation Resistance > 100 M: (500 V DC)
50g (DIN / IEC 68-2-27, 11ms)
Shock Resistance
Vibration Resistance 20g (DIN / IEC 68-2-6, 10 - 2000 Hz)
EMC
4 kV / 8 kV AD
EN 61000-4-2 ESD
EN 61000-4-3 HF
30 V/m
Radiated
2 kV
EN 61000-4-4 Burst
EN 61000-4-6 HF
10 V
Conducted
EMC (PTD25-20-xxxxx)
4 kV / 8 kV AD
EN 61000-4-2 ESD
EN 61000-4-3 HF
30 V/m
Radiated
2 kV
EN 61000-4-4 Burst
EN 61000-4-6 HF
10 V
Conducted
2004/104/EC / CISPR25, according to the road vehicle
Radiation of
guideline
Interference
Noise Immunity

2004/104/EC / ISO 11452-2, according to the road vehicle

guideline

HF Conducted
Pulse Resistance
Agency Approvals

100 V/m

ProSense PTD25 Series Technical Specifications

Technical Specifications PTD25-10-xxxxx
Operating Voltage PTD25-10-xxxx
Current Consumption
Analog Output
Minimum Load
Step Response Time Analog Output

16 to 32 VDC1
< 18 mA
0 to 10 V (min/max 0 to 10.5V)

2000
3 ms

Technical Specifications PTD25-20-xxxxx

Operating Voltage PTD25-20-xxxx
Analog Output
Maximum Load

9.6 to 32 VDC
4 to 20 mA (min/max 3.85 to 22 mA)
[(supply voltage - 9.6) x 50]
For example:
[(24 VDC - 9.6) x 50] = 720

Step Response Time Analog Output 3 ms

Radiation of Interference

2004/104/EC / CISPR25, according to

the road vehicle guideline

Noise Immunity

2004/104/EC / ISO 11452-2, according

to the road vehicle guideline

HF Conducted

100 V/m

Pulse Resistance

According to ISO7637-2:
Severity level 3

1)

per EN50178, SELV, PELV

*Note: BFSL = Best Fit Straight Line / FR = Full Range

According to ISO7637-2: Severity level 3

cULus (E320431), CE, RoHS

* Not cleaned for oxygen service

WARNING! AVOID STATIC AND DYNAMIC OVERPRESSURE EXCEEDING THE GIVEN OVERLOAD PRESSURE.
EXCEEDING THE BURSTING PRESSURE FOR EVEN A SHORT TIME CAN CAUSE DESTRUCTION OF THE UNIT AND POSSIBLE INJURIES!

Volume 14

e23-10

Sensors

1 - 80 0 - 633 - 0405

PTD25 Pressure Transmitters

Field I/O
Software
C-more &
other HMI

0 to 5000

11600

17400

0 to 3000

5800

12300

0 to 1000

4350

9400

0 to 500

2175

5075

Motors &
Gearbox

0 to 200

1087

2175

0 to 100

1087

2175

Steppers/
Servos

0 to 30

290

725

0 to 15

145

450

-14.5 to 0
(vacuum)

145

450

inH2O
PTD25-10-0100WCH
PTD25-20-0100WCH

Programmable
Controllers

mm [inches]

Measuring Permissible
Bursting
Range
Overload Pressure Pressure
PSI
PSI
PSI

PTD25-10-5000H
PTD25-20-5000H
PTD25-10-3000H
PTD25-20-3000H
PTD25-10-1000H
PTD25-20-1000H
PTD25-10-0500H
PTD25-20-0500H
PTD25-10-0200H
PTD25-20-0200H
PTD25-10-0100H
PTD25-20-0100H
PTD25-10-0030H
PTD25-20-0030H
PTD25-10-0015H
PTD25-20-0015H
PTD25-10-VH
PTD25-20-VH

Systems
Overview

Dimensions

Applications
(Type of Pressure: Relative Pressure, Liquids and Gases)
Part Number

Company
Information

inH2O

0 to 100

Drives
Soft
Starters

Motor
Controls
Proximity
Sensors
Photo
Sensors
Limit
Switches

inH2O
4015

Encoders

12043

Current
Sensors

inH2O = Inches of Water (represents Water Column)

All PTD25 series transmitters can withstand vacuum down to -14.5 psi

PTD25-20 Wiring Diagrams

PTD25-10 Wiring Diagrams

Pressure
Sensors

Wiring

Wiring

(+)
L
Cable Assembly Wiring Colors:
Pin 1 - Brown
Pin 2 - White
Pin 3 - Blue
Pin 4 - Black

Cable Assembly Wiring Colors:

Pin 1 - Brown
Pin 2 - White
Pin 3 - Blue
Pin 4 - Black

See Proximity Sensor

section for cable specs

(-)

See Proximity
Sensor section
for cable specs

Note: Wiring colors are based on AutomationDirect CD12L

and CD12M 4-pole cable assemblies.

Pressure Units Conversion Chart

Desired Units

Bars

In of Hg
(0C)

In of H2O
(4C)

9.86923 x 10-1 3.34207 x 10-2 2.458 x 10-3

1.01325
1
3.3864 x 10-2 2.491 x 10-3
29.9213
29.53
1
7.355 x 10-2
406.8
401.46
13.60
1
25.40
K grams/meter2 1.033227 x 10 4 1.0197 x 104 345.3

K grams/
meter2
9.678x 10-5
9.8067 x 10-5

Atmos
Bars
In of Hg (0C)
In of H2O (4C)

Lb/in2(psi)
Lb/ft2
mm of Hg torr
Pascals

14.695595

14.504

0.4912

2116.22

2088.5

70.726

3.6126 x 10-2
5.202

760

750.06
1 x 105

25.400

1.868

1.423 x 10-3
0.2048
7.3558 x 10-2

3.386 x 103

2.491 x 102

9.8067

1.01325 x 105

2.896 x 10-3
3.937 x 10-2
1

6.8948 x 10-2
2.036

mm of Hg
torr

Pascals

4.7254 x 10-4
4.788 x 10-4

1.316 x 10-3
1.333 x 10-3

9.869 x 10-6
10-5

0.014139

2.953 x 10-4
4.014 x 10-3
1.019 x 10-1
1.450 x 10-4

27.68

0.1922

3.937 x 10-2
0.5354

7.0306 x 102
1

4.882

13.59

144.0

6.9444 x 10-3
1

1.934 x 10-2
2.7844

51.715

0.35913

2.089 x 10-2
7.502 x 10-3

6.8948 x 103

4.788 x 101

1.333 x 102

Example: To convert from 50 psi to In of H2O, (50 psi) (27.68) = 1384 In of H2O
Volume 14

w w w. a u to m a t i o n d i re c t . c o m / p res s u re - s e n s o rs

Process
Relays/
Timers
Comm.

Power

Lb/in2 (psi) Lb/ft2

0.068046

Pushbuttons/
Lights

Terminal
Blocks &
Wiring

Pressure Conversion Table: Multiplication Factors

Known Units
Atmos

Temperature
Sensors

Sensors

e23-11

Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index
Part #
Index

SPT25 Series Pressure Transmitters

The ProSense SPT25 pressure transmitter series is engineered to meet many
industrial, commercial, and OEM pressure measurement applications. The all
stainless steel welded thin film sensing element provides very fast response time
and is compatible with many different media sensing applications. With a
robust design resistant to vibration, shock, and EMI/RFI, the SPT25 series
provides high accuracy over a wide compensated temperature range. Pressure
sensing ranges from vacuum to 5000 psi are available along with a inch
NPT male threaded process connection. Choose from linear outputs of 4-20
mA or 0-10VDC with electrical connections of either a DIN 175301-803C
L-connector or 6.6 foot (2 m) integral shielded cable.

Applications

Process control & automation

Pump & compressor control
Hydraulic systems
Pneumatic systems
Engine monitoring
Refrigeration equipment
Presses
Machine tools

Features

All stainless steel welded sensing element

Fast response time
Pressure sensing ranges from vacuum to 5000 psi
1/4 inch NPT male threaded process connection
Output options: 4-20 mA or 0-10 VDC
Integral 6.6 foot shielded cable or DIN form C electrical connections
Made in the USA
CE marked
3-year warranty

ProSense SPT25 Series Pressure Transmitters (Shielded Cable)

Part Number

Description

Electrical Connection Input Voltage Wt(lb) Price

SPT25-20-V30A

Pressure transmitter, 4 to 20 mA output, -14.7 vacuum to 30 psi range, 1/4 NPT male port

<--->

SPT25-20-0030A

Pressure transmitter, 4 to 20 mA output, 0 to 30 psi range, 1/4 NPT male port

<--->

SPT25-20-0060A

Pressure transmitter, 4 to 20 mA output, 0 to 60 psi range, 1/4 NPT male port

<--->

SPT25-20-0100A

Pressure transmitter, 4 to 20 mA output, 0 to 100 psi range, 1/4 NPT male port

<--->

SPT25-20-0150A

Pressure transmitter, 4 to 20 mA output, 0 to 150 psi range, 1/4 NPT male port

<--->

SPT25-20-0200A

Pressure transmitter, 4 to 20 mA output, 0 to 200 psi range, 1/4 NPT male port

SPT25-20-0300A

Pressure transmitter, 4 to 20 mA output, 0 to 300 psi range, 1/4 NPT male port

SPT25-20-0500A

Pressure transmitter, 4 to 20 mA output, 0 to 500 psi range, 1/4 NPT male port

<--->

SPT25-20-1000A

Pressure transmitter, 4 to 20 mA output, 0 to 1000 psi range, 1/4 NPT male port

<--->

SPT25-20-1500A

Pressure transmitter, 4 to 20 mA output, 0 to 1500 psi range, 1/4 NPT male port

<--->

SPT25-20-2000A

Pressure transmitter, 4 to 20 mA output, 0 to 2000 psi range, 1/4 NPT male port

<--->

SPT25-20-3000A

Pressure transmitter, 4 to 20 mA output, 0 to 3000 psi range, 1/4 NPT male port

<--->

SPT25-20-5000A

Pressure transmitter, 4 to 20 mA output, 0 to 5000 psi range, 1/4 NPT male port

SPT25-10-V30A

Pressure transmitter, 0 to 10 V output, -14.7 vacuum to 30 psi range, 1/4 NPT male port

SPT25-10-0030A

Pressure transmitter, 0 to 10 V output, 0 to 30 psi range, 1/4 NPT male port

<--->

SPT25-10-0060A

Pressure transmitter, 0 to 10 V output, 0 to 60 psi range, 1/4 NPT male port

<--->

SPT25-10-0100A

Pressure transmitter, 0 to 10 V output, 0 to 100 psi range, 1/4 NPT male port

<--->

SPT25-10-0150A

Pressure transmitter, 0 to 10 V output, 0 to 150 psi range, 1/4 NPT male port

<--->

SPT25-10-0200A

Pressure transmitter, 0 to 10 V output, 0 to 200 psi range, 1/4 NPT male port

SPT25-10-0300A

Pressure transmitter, 0 to 10 V output, 0 to 300 psi range, 1/4 NPT male port

SPT25-10-0500A

Pressure transmitter, 0 to 10 V output, 0 to 500 psi range, 1/4 NPT male port

<--->

SPT25-10-1000A

Pressure transmitter, 0 to 10 V output, 0 to 1000 psi range, 1/4 NPT male port

<--->

SPT25-10-1500A

Pressure transmitter, 0 to 10 V output, 0 to 1500 psi range, 1/4 NPT male port

<--->

SPT25-10-2000A

Pressure transmitter, 0 to 10 V output, 0 to 2000 psi range, 1/4 NPT male port

<--->

SPT25-10-3000A

Pressure transmitter, 0 to 10 V output, 0 to 3000 psi range, 1/4 NPT male port

<--->

SPT25-10-5000A

Pressure transmitter, 0 to 10 V output, 0 to 5000 psi range, 1/4 NPT male port

<--->

<--->
9 - 36 VDC

<--->

<--->

Integral 6.6 ft (2m)

shielded cable

0.38
<--->

<--->
14 - 36 VDC

<--->

Volume 14

e23-12

Sensors

1 - 80 0 - 633 - 0405

SPT25 Series Pressure Transmitters

Company
Information
Systems
Overview
Programmable
Controllers

ProSense SPT25 Series Pressure Transmitters (DIN Connector)

Part Number

Description

Electrical Connection Input Voltage Wt(lb) Price

SPT25-20-V30D

Pressure transmitter, 4 to 20 mA output, -14.7 vacuum to 30 psi range, 1/4 NPT male port

<--->

Field I/O

SPT25-20-0030D

Pressure transmitter, 4 to 20 mA output, 0 to 30 psi range, 1/4 NPT male port

<--->

Software

SPT25-20-0060D

Pressure transmitter, 4 to 20 mA output, 0 to 60 psi range, 1/4 NPT male port

<--->

SPT25-20-0100D

Pressure transmitter, 4 to 20 mA output, 0 to 100 psi range, 1/4 NPT male port

<--->

SPT25-20-0150D

Pressure transmitter, 4 to 20 mA output, 0 to 150 psi range, 1/4 NPT male port

<--->

SPT25-20-0200D

Pressure transmitter, 4 to 20 mA output, 0 to 200 psi range, 1/4 NPT male port

<--->

SPT25-20-0300D

Pressure transmitter, 4 to 20 mA output, 0 to 300 psi range, 1/4 NPT male port

SPT25-20-0500D

Pressure transmitter, 4 to 20 mA output, 0 to 500 psi range, 1/4 NPT male port

<--->

SPT25-20-1000D

Pressure transmitter, 4 to 20 mA output, 0 to 1000 psi range, 1/4 NPT male port

<--->

SPT25-20-1500D

Pressure transmitter, 4 to 20 mA output, 0 to 1500 psi range, 1/4 NPT male port

<--->

SPT25-20-2000D

Pressure transmitter, 4 to 20 mA output, 0 to 2000 psi range, 1/4 NPT male port

<--->

SPT25-20-3000D

Pressure transmitter, 4 to 20 mA output, 0 to 3000 psi range, 1/4 NPT male port

<--->

SPT25-20-5000D

Pressure transmitter, 4 to 20 mA output, 0 to 5000 psi range, 1/4 NPT male port

SPT25-10-V30D

Pressure transmitter, 0 to 10 V output, -14.7 vacuum to 30 psi range, 1/4 NPT male port

SPT25-10-0030D

Pressure transmitter, 0 to 10 V output, 0 to 30 psi range, 1/4 NPT male port

<--->

SPT25-10-0060D

Pressure transmitter, 0 to 10 V output, 0 to 60 psi range, 1/4 NPT male port

<--->

SPT25-10-0100D

Pressure transmitter, 0 to 10 V output, 0 to 100 psi range, 1/4 NPT male port

<--->

Limit
Switches

SPT25-10-0150D

Pressure transmitter, 0 to 10 V output, 0 to 150 psi range, 1/4 NPT male port

<--->

Encoders

SPT25-10-0200D

Pressure transmitter, 0 to 10 V output, 0 to 200 psi range, 1/4 NPT male port

<--->

SPT25-10-0300D

Pressure transmitter, 0 to 10 V output, 0 to 300 psi range, 1/4 NPT male port

SPT25-10-0500D

Pressure transmitter, 0 to 10 V output, 0 to 500 psi range, 1/4 NPT male port

<--->

SPT25-10-1000D

Pressure transmitter, 0 to 10 V output, 0 to 1000 psi range, 1/4 NPT male port

<--->

SPT25-10-1500D

Pressure transmitter, 0 to 10 V output, 0 to 1500 psi range, 1/4 NPT male port

<--->

SPT25-10-2000D

Pressure transmitter, 0 to 10 V output, 0 to 2000 psi range, 1/4 NPT male port

<--->

SPT25-10-3000D

Pressure transmitter, 0 to 10 V output, 0 to 3000 psi range, 1/4 NPT male port

<--->

SPT25-10-5000D

Pressure transmitter, 0 to 10 V output, 0 to 5000 psi range, 1/4 NPT male port

<--->

9 - 36 VDC

Wire Color
Red
Black
White
Com Bare*

V+

Black

Com

With DIN Connector

With Integral Cable

V+
R
L

With DIN Connector

Com

<--->

Red

Black

0 - 10 VDC Output 4 - 20 mA Output

V+

V+

Com

Output

Output

None

Shield Drain Wire

Shield Drain Wire

* Where shielded wiring is being used; Connect the drain wire

to the guard terminal on the read out device or measuring
instrument if available. In all other cases connect to the power
supply negative terminal.

4 to 20 mA Output Wiring Diagrams

1

<--->

Shielded Cable Models Wire Designation

White

0.30

Drives
Soft
Starters
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
Proximity
Sensors
Photo
Sensors

Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers

Red

V+

<--->

DIN 175301-803C
L-connector

14 - 36 VDC

0 to 10 VDC Output Wiring Diagram

1

<--->

C-more &
other HMI

V+
R
L

Com

With Integral Cable

DIN Form C Models Pin Designation

Pin No.

0 - 10 VDC Output 4 - 20 mA Output

V+

V+

Com

Output

Output

None

Case Ground

Case Ground

Volume 14

w w w. a u to m a t i o n d i re c t . c o m / p res s u re - s e n s o rs

Sensors

e23-13

Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index
Part #
Index

SPT25 Series Pressure Transmitters

ProSense SPT25 Series General Specifications
Housing Material

20% Glass Reinforced Nylon, Fire retardant to UL94 V1 /

304 Series Stainless steel

Materials (wetted parts)**

Operating Temperature
Medium Temperature
Storage Temperature

304 Series Stainless steel / 17-4PH Stainless Steel

Protection

IP 67 for cabled models

IP 65 For DIN connector models

Accuracy*

0.50% of full range

Temperature Coefficient

0.15% of full range / 10F (0.25% of full range / 10C)

Reference Temperature

70F 1F (21C 1C)

40 to 257F (40 to 125C)

Determine Maximum Loop Resistances

40 to 257F (40 to 125C )

40 to 257F (40 to 125C)

Compensated Temperature 4 to 185F (20 to 85C)

Insulation Resistance
Shock Resistance

Greater than 100 megohms at 100 VDC

Vibration Resistance

Random vibration (20 g) over temperature range (-40 to

125C). Exceeds typical MIL. STD. requirements

Maximum Load

VL 9 VDC
0.022 amps

= RL

For example
[(24 VDC 9 VDC) / 0.022 amps] = 681

Technical Specifications SPT25-10-xxxx

14 36 VDC
Operating Voltage
4 mA
Current Consumption
10 k
Minimum Load
P ower S upply Voltage vs L oop R es is tanc e

100 gs, 6 ms

4-20mA ONLY
Loop Resistance (RL-Ohms)

Drop Test
Response Time
Warm-up time
Position Effect
Insulation Breakdown
Voltage
Reverse Polarity &
Miswired Protected
Durability
Humidity
Stability
Agency Approvals

ProSense SPT25 Series Technical Specifications

Technical Specifications SPT25-20-xxxx
9 36 VDC
Operating Voltage
4 20 mA
Analog Output

Withstands 1 meter on concrete 3 axis

Less than 1 msec
Less than 500 msec
Less than 0.01% span, typical
100 VAC
Yes

1400
1200

Tested to 50 million cycles

10
9 (min)

0 to 100% R.H., no effect

Less than 0.25% full range / year

40
36 (max)

Loop Supply Voltage (Vdc) [LSV]

CE

ProSense SPT25 Proof & Burst Pressures

*Note - Includes non-linearity, hysteresis & non-repeatability.

Proof

Burst

500 psi & below

200% full scale

1000% full scale

1000 2000 psi

200% full scale

500% full scale

3000 psi

200% full scale

500% full scale

5000 psi

150% full scale

500% full scale

** Not cleaned for oxygen service

Dimensions
inches [mm]

DIN Connector Models

Shielded Cable Models

Volume 14

e23-14

Sensors

1 - 80 0 - 633 - 0405

DPTA Series Differential Air

Pressure Transmitters

Applications

Company
Information
Systems
Overview

The ProSense DPTA differential pressure transmitter series is precision

engineered for accurate low differential pressure measurement of air and
non-condensing, non-corrosive gases in industrial, commercial, and OEM
applications. Its highly reliable, ultra-thin single silicon crystal diaphragm
capacitive sensor provides inherent repeatability and stability with no glues or
other organics to contribute to drift or mechanical degradation over time. The
DPTA series is available in ranges from 0.1 inches w.c. to 25 inches w.c. to
measure positive, negative, and bi-directional pressures with the ability to
withstand 15 psi overpressure without damage or calibration shift. The easily
accessible brass barbed pressure ports, removable terminal blocks, and rugged
ABS housing capable of 35 mm DIN rail or panel mounting make installation
quick and easy.

HVAC duct static pressure

Air filter monitoring
Building pressurization
Isolation and clean rooms
Fume hoods
Furnace, oven, dryer draft pressure
Air flow measurement

Features

DPTA-20-P1

Differential Pressure transmitter, 4 to 20 mA output, 0 to 0.1 in. water column range, 1/4 brass barbed connections

Drives
Soft
Starters
Motors &
Gearbox

Photo
Sensors
Limit
Switches
Encoders

Electrical Input Wt(lb) Price

Connection Voltage
<--->
<--->

DPTA-20-P25 Differential Pressure transmitter, 4 to 20 mA output, 0 to 0.25 in. water column range, 1/4 brass barbed connections

<--->

DPTA-20-P25B Differential Pressure transmitter, 4 to 20 mA output, -0.25 to +0.25 in. water column range, 1/4 brass barbed connections

<--->

DPTA-20-P5

<--->

Differential Pressure transmitter, 4 to 20 mA output, 0 to 0.5 in. water column range, 1/4 brass barbed connections

DPTA-20-P5B Differential Pressure transmitter, 4 to 20 mA output, -0.5 to +0.5 in. water column range, 1/4 brass barbed connections

<--->

DPTA-20-01

<--->

Differential Pressure transmitter, 4 to 20 mA output, 0 to 1.0 in. water column range, 1/4 brass barbed connections

DPTA-20-01B Differential Pressure transmitter, 4 to 20 mA output, -1.0 to +1.0 in. water column range, 1/4 brass barbed connections

<--->

DPTA-20-02

<--->

DPTA-20-03

C-more &
other HMI

Proximity
Sensors

DPTA-20-P1B Differential Pressure transmitter, 4 to 20 mA output, -0.1 to +0.1 water column range, 1/4 brass barbed connections

Differential Pressure transmitter, 4 to 20 mA output, 0 to 2.0 in. water column range, 1/4 brass barbed connections

DPTA-20-02B Differential Pressure transmitter, 4 to 20 mA output, -2.0 to +2.0 in. water column range, 1/4 brass barbed connections

Software

Motor
Controls

ProSense DPTA Series Differential Air Pressure Transmitters

Description

Field I/O

Steppers/
Servos

Highly stable capacitive sensing element

Positive, negative, and bi-directional pressure measurement
Pressure ranges from 0.1w.c. to 25w.c.
Accuracy is +/-1% of full range maximum
High overpressure rating of 15 psi without damage or calibration shift
Rugged ABS housing capable of DIN rail or panel mounting
LED loop power status indicator
Made in the USA
CE marked
3-year warranty

Part Number

Programmable
Controllers

Screw
Terminals

12 - 36
VDC

0.16

Differential Pressure transmitter, 4 to 20 mA output, 0 to 3.0 in. water column range, 1/4 brass barbed connections

<--->
<--->

DPTA-20-03B Differential Pressure transmitter, 4 to 20 mA output, -3.0 to +3.0 in. water column range, 1/4 brass barbed connections

<--->

DPTA-20-05

<--->

Differential Pressure transmitter, 4 to 20 mA output, 0 to 5.0 in. water column range, 1/4 brass barbed connections

DPTA-20-05B Differential Pressure transmitter, 4 to 20 mA output, -5.0 to +5.0 in. water column range, 1/4 brass barbed connections

<--->

DPTA-20-10

<--->

Differential Pressure transmitter, 4 to 20 mA output, 0 to 10.0 in. water column range, 1/4 brass barbed connections

DPTA-20-10B Differential Pressure transmitter, 4 to 20 mA output, -10.0 to +10.0 in. water column range, 1/4 brass barbed connections

<--->

DPTA-20-15

<--->

Differential Pressure transmitter, 4 to 20 mA output, 0 to 15.0 in. water column range, 1/4 brass barbed connections

DPTA-20-15B Differential Pressure transmitter, 4 to 20 mA output, -15.0 to +15.0 in. water column range, 1/4 brass barbed connections

<--->

DPTA-20-25

<--->

Differential Pressure transmitter, 4 to 20 mA output, 0 to 25.0 in. water column range, 1/4 brass barbed connections

Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index

Volume 14

w w w. a u to m a t i o n d i re c t . c o m / p res s u re - s e n s o rs

Sensors

e23-15

Part #
Index

DPTA Series Differential Air

Pressure Transmitters
ProSense DPTA Series Specifications
Operating Voltage
Output Range*
Supply Current*

4 - 20 mA (2-wire)
21.5 mA Max.
VL 12 VDC

Maximum Load

Load Limitations 420mA Output

12 36 VDC

0.022 amps

= RL

For example
[(24 VDC 12 VDC) / 0.022 amps] = 545
NEMA Type 1 Fire-retardant ABS (meets UL 95-5VA)
Enclosure
Pressure Connections 1/4 brass barbed fittings
0.16 lb
Weight
Clean, dry and non-corrosive gas
Media
Threaded fastener and 35mm DIN rail mount
Mounting
Reference Temperature 70F 2F (21C 1C)
Temperature
0.03% full range / F
Coefficients Zero & Span
Compensated Range 35 to 130F (2 to 54C)
Operating Temperature 0 to 160F (18 to 71C)
Storage Temperature 40 to 180F (40 to 82C)
10 to 95% R.H., non-condensing
Humidity
Less than 0.25% full range / year
Stability

Accuracy

1% maximum. Includes non-linearity, hysteresis,

nonrepeatability, zero offset and span setting errors.

Response Time
Proof Pressure
Burst Pressure
Max. Static Line
Pressure
Electrical Connection
Terminal Screw Torque
Reverse Wiring
Protected
External Zero
Adjustment
External Span
Adjustment
Agency Approvals

250 msec

TING

Vmin = 12V+ [.022A*(RL)]

*includes a 10% safety factor
RL = RS + RW
RL = Loop Resistance (ohms)
RS = Sense Resistance (ohms)
RW = Wire Resistance (ohms)

Mounting Options
Use
#10
screw

Use #8
screw

or

35 mm DIN rail

Span Pot

15 psid
25 psid

Green LED

15 psi

Zero Pot
Use #8
screw

Euro style pluggable terminal block accepts 12-26 gauge wire

or

Use #10
screw

4 lbs in (0.5 Nm)

NOTE: PROSENSE DPTA SERIES TRANSMITTER SHOULD BE

Yes

MOUNTED IN A VERTICAL AND UPRIGHT POSITION AS SHOWN

ABOVE.

5% full range
5% full range
CE, RoHS

Dimensions inches [mm]

* Output signal is independant of power supply changes.

MOUNTING HORIZONTALLY MAY AFFECT ACCURACTY BY AN

ADDITIONAL 1%.

Wiring Diagram

ZERO

SPAN

Zero adjus t
potentiometer

S pan adjus t
potentiometer

+
+ Load

POWER

SUPPLY

Volume 14

e23-16

Sensors

1 - 80 0 - 633 - 0405

Keep it simple, pass along the value.

Saving you money every day since 1994 . . .
We were originally founded as PLCDirect in 1994 and have grown from a
tiny PLC company to one of the best value choices in the industry.
As the first industrial controls company to successfully use a telephone
supported direct sales catalog for PLC products, we learned that the way its
always been done approach is not necessarily the most efficient way. So we
worked smarter to develop in-house processes that maximized productivity to
keep costs low. Then we passed those savings on to our customers.
In 1999, we changed our name to AutomationDirect.com, and brought
that pass along the value philosophy online. We have been serving tens
of thousands of satisfied customers ever since.
Whether the economy is up or down, we are prepared to serve our
customers efficiently, with better service and value than traditional
suppliers.

. . . and always #1 rated service for FREE

OEMs spoke, and they spoke our name 12 years in a row! The Readers
Choice survey hosted by Control Design magazine aims to identify the
best products and service in the industry. Results for every year going back
to 2001 indicate we consistently provide top-notch support to our
customers in several product categories.
And weve been voted tops in service by several other independent industry
sources as well.

1-800-633-0405

www.automationdirect.com

Digital Pressure Switch /

Transmitter
Overview

Precision digital pressure switch/transmitter with 2 meter cable

Two digital outputs (NPN or PNP) which may be set individually
and a 4-20 mA analog output
Two vacuum to pressure ranges (-14.5 to 14.5 and -14.5 psi to 145
psi)
Air, non-corrosive/non-flammable gases only
Three operation modes: Easy, Window and Hysteresis
3-color digital LCD display
6 pressure unit conversions
Lockable keypad
Unit parameters are easily copied to other units
Selectable response times to eliminate output chattering
Fast zero reset
Optional panel mount and bracket kits
2-year warranty
E157382

ProSense QPS Digital Pressure Switch / Transmitter

Part Number
QPSL-AP-42
QPSL-AN-42
QPSH-AP-42
QPSH-AN-42

Pcs/Pkg

Wt (lb)

Price

Digital pressure switch/transmitter -14.5 to 14.5 psi, 2 PNP out, 4-20 mA out, cable included

Description

0.24

<--->

Digital pressure switch/transmitter -14.5 to 14.5 psi, 2 NPN out, 4-20 mA out, cable included

0.24

<--->

Digital pressure switch/transmitter -14.5 to 145 psi, 2 PNP out, 4-20 mA out, cable included

0.24

<--->

Digital pressure switch/transmitter -14.5 to 145 psi, 2 NPN out, 4-20 mA out, cable included

0.24

<--->

ProSense QPS Digital Pressure Switch / Transmitter Specifications

Model
Pressure Range
Maximum Pressure (Proof)
Maximum Vacuum
Pressure Accuracy
Temperature Influence @ 25C
Fluid Measured
Input Power
Power Consumption
Output Type
Max Current
Digital Outputs
Response Time
Residual Voltage
Output Type
Analog Outputs
Output Load Resistance
Linear Accuracy
Process Connection

QPSL-AP-42

QPSL-AN-42

QPSH-AP-42

-14.5 to +14.5psi

QPSH-AN-42

-14.5 to +145psi

29psi

217psi
-14.5psi
3% of full scale
2% of full scale
Air, Non-corrosive gas, Non-flammable gas
10.8 to 26.4 VDC
260mA maximum

2-PNP

2-NPN

2-PNP

2-NPN

100mA
2ms, 4ms, 10ms, 30ms, 50ms, 100ms, 250ms, 500ms, 1,000ms, 5,000ms selectable
1.5 VDC
4-20mA
400
< 2% of full scale
1/8 NPT outer / M5 inner bore (Nickel Plated Brass)
Included with each unit, 2 meter (6.6 feet), 5 conductor, 26AWG, PVC jacket, and 50 mm pigtail leads
Replacement cable : QPS-CBL

Cable
IP Rating
Case Materials
Shock Immunity
Vibration Immunity
Operating Temperature
Storage Temperature
Altitude
Ambient Humidity
Approvals

IP 40
Case = ABS Plastic, Lens = Polycarbonate
10 ~ 500Hz, 10mm 3 axes for 2 hours
Max. 100m / s2 3 axes 6 directions, 3 times each
0C to +50C (32F to 122F)
-20C to +65C (-4F to 149F)
< 2,000m
35% to 80% (non-condensing)
cULus (E157382), CE, RoHS

Volume 14

e23-18

Sensors

1 - 80 0 - 633 - 0405

Digital Pressure Switch /

Transmitter
1

OUT 1
OUT 2

10
6

Systems
Overview
Programmable
Controllers

Display, KeyPad, Connections

ANALOG

Company
Information

Field I/O

1 - Analog output indicator

2 - Digital output 1 indicator
3 - Digital output 2 indicator
4 - Pressure Value (PV)/parameter display (8 mm digits)
5 - Setpoint Value (SV)/setup item display (4 mm digits)
6 - Increment UP button
7 - SET or Enter button
8 - Increment DOWN button
9 - Cable connection
10 - Pressure connection

Dimensions

Software
C-more &
other HMI
Drives
Soft
Starters
Motors &
Gearbox

Cable Connection
Terminals

mm [inches]

Steppers/
Servos
Motor
Controls
Proximity
Sensors
Photo
Sensors

1 - Positive power supply input

(brown)
2 - Digital output 1 signal (black)
3 - Digital output 2 signal (white)
4 - Analog output signal (orange)
5 - Negative power supply input
(blue)

Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights

Process
Relays/
Timers

Wiring
QPSL-AN-42
QPSH-AN-42

Comm.

Load

Load

Outputs:

Input Power
10.8 to 26.4 VDC

NPN discrete

4-20mA analog

Terminal
Blocks &
Wiring

QPSL-AP-42
QPSH-AP-42

Power

Outputs:

Input Power
10.8 to 26.4 VDC

PNP discrete

4-20mA analog

Circuit
Protection
Enclosures

Load

Tools

Load

Load

Load

Pneumatics
Safety
Appendix
Product
Index

Volume 14

w w w. a u to m a t i o n d i re c t . c o m / p res s u re - s e n s o rs

Sensors

e23-19

Part #
Index

Operating Modes:

Digital Pressure Switch /

Transmitter

Easy Mode: When the measured pressure is greater than pressure setpoint plus the hysteresis setting
(SV+hysteresis), the output will change state. When the measured pressure is less than the
pressure setpoint (<SV), the output will change state. Each digital output can be
individually set.

SV

Hysteresis

Time

Output:

On

Hysteresis Mode: When the measured pressure is greater than the Hi setpoint, the output will change state.
When the measured pressure is less than the Lo setpoint, the output will change state.
Each digital output can be individually set.
Off

Output:

On
Off

Window Mode: The output will change state when the measured pressure increases to the Lo setpoint plus
the hysteresis setting (Lo+hysteresis) and will change state again when the pressure increases
to the Hi setpoint plus the hysteresis setting (Hi+hysteresis). When the pressure decreases to
the Hi setpoint the output will change state and will change state again when the pressure
decreases to the Lo setpoint.

Hysteresis
Hysteresis

Output:

On
Off

Analog Output (4-20mA): The analog output is directly proportional to the process pressure over the full range of the
device. For example if the process pressure is 0 psi the 4-20 mA output of a QPSL will be
approximately 12 mA or for the QPSH the pressure at 12 mA would be 65.3 psi and for 0 psi
the output would be 5.45mA. The analog output is enabled as the factory default. It can be
disabled with the Analog Output Enable parameter in Pro Setup Mode.
20mA

20mA

12mA

12mA

4mA

-14.5psi

0psi
QPSL-xx-42

14.5psi

5.45mA
4mA

-14.5psi 0psi

65.3psi

145psi

QPSH-xx-42

Volume 14

e23-20

Sensors

1 - 80 0 - 633 - 0405

Digital Pressure Switch /

Transmitter Accessories

Company
Information
Systems
Overview
Programmable
Controllers

ProSense QPS Digital Pressure Switch / Transmitter Accessories

Part Number
QPS-PMK
QPS-FMK

Pcs/Pkg

Wt (lb)

Price

Panel mount kit for QPS series

Description

0.1

<--->

Bracket mount kit for QPS series

0.1

<--->

QPS-CBL

Replacement cable for QPS series digital pressure switch and transmitter,
2 meters (6.6 feet)

0.1

<--->

Field I/O
Software
C-more &
other HMI
Drives
Soft
Starters
Motors &
Gearbox
Steppers/
Servos

QPS-PMK

QPS-FMK

Dimensions

Proximity
Sensors

mm [inches]
QPS-PMK - Optional Panel Mount Kit
M3.5 x 6mm

M3.5 x 14mm

Motor
Controls

QPS-CBL

QPS-FMK - Optional Frame

Mount Kit

Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.

PMK Front Bezel

Terminal
Blocks &
Wiring

PMK Back Retaining Clip

Power

Note: See the NITRA Pneumatics section for Push-to-Connect

fittings and tubing

Circuit
Protection
Enclosures

QPS-CBL

Tools
Pneumatics
Safety

Note: Cable included with each QPS series

switch/transmitter
Volume 14

w w w. a u to m a t i o n d i re c t . c o m / p res s u re - s e n s o rs

Sensors

e23-21

Appendix
Product
Index
Part #
Index

Pressure Gauges
Bourdon Tube Pressure Gauges

ProSense mechanical dial pressure gauges are available in a

variety of configurations for use in most pneumatic, hydraulic,
HVAC, plumbing, industrial and commercial applications. These
high quality gauges use Bourdon tube sensing elements and do
not require any external power sources to operate other than the
media being sensed. Cases are available in durable steel or
stainless steel and in either dry or liquid filled to dampen
vibration and pulsations. Brass wetted parts are suitable for air,
oil, or water applications while stainless steel wetted parts are
available for corrosive applications. Dual marked dial faces
(psi/kPa or inHg/kPa) are available in pressure ranges from
vacuum up to 6000 psi.

The Bourdon tube pressure gauge applies the principle that a

flattened tube will change to a more circular crosssection when
pressurized. These tubes are then bent into a Cshape with one
end crimped close and the other connected to the process.
When the pressure inside the tube becomes greater than the
ambient pressure the tube tries to straighten; this elongation is
converted to a rotational motion with the use of a pinion gear
attached to the pointer.

Gauge Selection Considerations

Environment and Application

As the Bourdon tube is in direct contact with the medium being

measured, the characteristics of the medium must be
considered. If the medium is corrosive, stainless steel internals
and casing should be chosen over brass. Brass is more suitable
for general applications. The effects of moisture and weather
conditions may also be harmful to the gauge and should be
considered when selecting a gauge. Liquid filled gauges help
prevent moisture build-up. Medium that will leave a deposit,
clog or solidify in the Bourdon tube should be avoided.

For applications that produce harmful pulsation, vibration or

pressure spikes, a liquid filled gauge will minimize the effects of
vibration and provide a more accurate pressure reading.

Gauge Size

ProSense gauges are available with dial sizes of 1.5, 2 or 2.5

inches.

Connection

ProSense gauges offer lower and center back connections. The

standard threads are 1/8 and NPT.

Accuracy

The bourdon tubes are calibrated at the factory for a specific

range known as gauge pressure*. This pressure is relative to
ambient atmospheric pressure.

Pressure Gauge Terms:

Atmospheric Pressure: The weight of a column of air measuring

one square inch from sea level to the top of the atmosphere. Sea
level pressure = 29.92 inHg / 101.325 kPa / 14.696 psi / 1.0132 bar
Absolute Pressure: Zero (0) in reference to a perfect vacuum
Absolute Pressure = gauge pressure (+) atmospheric pressure.
*Gauge Pressure: Zero (0) in reference to Atmospheric Pressure.
Gauge Pressure= absolute pressure (-) atmospheric pressure.
Differential Pressure: Is the difference in pressure between two
measuring points.

Gauge Accuracy and Grade

Gauge accuracy and grade categorized by

ASME (ANSI) Standard B40.1
Gauge Accuracy

ANSI Grade

5% Full Scale

3% lower Scale; 2% middle scale; 3% upper scale

2% lower Scale; 1% middle scale; 2% upper scale

1% Full Scale

1A

0.5% Full Scale

2A

0.25% Full Scale

3A

The degree of accuracy required should be determined to

ensure that the proper gauge is used. ProSense gauges offer
accuracies of +/- 1.5% or +/- 3-2-3% (ANSI/ASME Grade B).
Generally, the more critical the application, the higher the accuracy required.

Gauge Mounting

ProSense pressure gauges can be mounted in a variety of ways.

For direct stem mount, we offer lower and center back connections. Bear in mind that if a piece of equipment produces heavy
vibration making pressure reading difficult due to needle fluctuations, consider a liquid-filled gauge or remote mounting.

Pressure Range

It is important to select a pressure range that is approximately

twice the normal operating pressure of the media. The
maximum operating pressure should not exceed 75% of the full
scale range. If a gauge is not selected considering these criteria,
it may result in fatigue of the Bourdon tube.

Temperature Range

The normal temperature ranges for dry gauges are between

-40C to 65C (-40F to 150F). The normal temperature
ranges for glycerin-filled gauges are -20C to 65C (-4F to
150F). It is important to know the normal operating
temperature of the environment for proper gauge use.

Volume 14

e23-22

Sensors

1 - 80 0 - 633 - 0405

Steel Case / Brass Wetted

Pressure Gauges
Lower Mount

Center Back Mount

Features

Economical, all-purpose pressure

gauge
Friction bezel rings
Dual scale (psi/kPa)
Brass wetted parts for use with air,
oil, water and non-corrosive liquids
3-2-3% accuracy - ASME/ANSI
Grade B
5 year warranty

Company
Information
Systems
Overview
Programmable
Controllers

Applications

Plumbing, heating, air conditioning,

pneumatic, hydraulic, water tanks,
air compressors, OEM, general
purpose

Description

Motors &
Gearbox

Pcs/Pkg

Wt(lb) Price

Gauge, 1.5 in., steel case, dry, -30 to 0 inHg/-100 to 0 kPa vacuum, brass-1/8 NPT, lower mount
Gauge, 1.5 in., steel case, dry, 030 PSI/0-200 kPa, brass-1/8 NPT, lower mount
Gauge, 1.5 in., steel case, dry, 060 PSI/0-400 kPa, brass-1/8 NPT, lower mount
Gauge, 1.5 in., steel case, dry, 0100 PSI/0-700 kPa, brass-1/8 NPT, lower mount
Gauge, 1.5 in., steel case, dry, 0160 PSI/0-1,100 kPa, brass-1/8 NPT, lower mount
Gauge, 1.5 in., steel case, dry, 0200 PSI/0-1,400 kPa, brass-1/8 NPT, lower mount

1
1
1
1
1
1

0.20
0.20
0.20
0.20
0.20
0.20

<--->
<--->
<--->
<--->
<--->
<--->

Gauge, 1.5 in., steel case, dry, -30 to 0 inHg/-100 to 0 kPa vacuum, brass-1/8 NPT, center back mount
Gauge, 1.5 in., steel case, dry, 030 PSI/0-200 kPa, brass-1/8 NPT, center back mount
Gauge, 1.5 in., steel case, dry, 060 PSI/0-400 kPa, brass-1/8 NPT, center back mount
Gauge, 1.5 in., steel case, dry, 0100 PSI/0-700 kPa, brass-1/8 NPT, center back mount
Gauge, 1.5 in., steel case, dry, 0160 PSI/0-1,100 kPa, brass-1/8 NPT, center back mount
Gauge, 1.5 in., steel case, dry, 0200 PSI/0-1,400 kPa, brass-1/8 NPT, center back mount

1
1
1
1
1
1

0.20
0.20
0.20
0.20
0.20
0.20

<--->
<--->
<--->
<--->
<--->
<--->

Description

Pcs/Pkg

Wt(lb) Price

Gauge, 2.0 in., steel case, dry, -30 to 0 inHg/-100 to 0 kPa vacuum, brass-1/4 NPT, lower mount
Gauge, 2.0 in., steel case, dry, 030 PSI/0-200 kPa, brass-1/4 NPT, lower mount
Gauge, 2.0 in., steel case, dry, 060 PSI/0-400 kPa, brass-1/4 NPT, lower mount
Gauge, 2.0 in., steel case, dry, 0100 PSI/0-700 kPa, brass-1/4 NPT, lower mount
Gauge, 2.0 in., steel case, dry, 0160 PSI/0-1,100 kPa, brass-1/4 NPT, lower mount
Gauge, 2.0 in., steel case, dry, 0200 PSI/0-1,400 kPa, brass-1/4 NPT, lower mount

1
1
1
1
1
1

0.20
0.20
0.20
0.20
0.20
0.20

<--->
<--->
<--->
<--->
<--->
<--->

Gauge, 2.0 in., steel case, dry, -30 to 0 inHg/-100 to 0 kPa vacuum, brass-1/4 NPT, center back mount
Gauge, 2.0 in., steel case, dry, 030 PSI/0-200 kPa, brass-1/4 NPT, center back mount
Gauge, 2.0 in., steel case, dry, 060 PSI/0-400 kPa, brass-1/4 NPT, center back mount
Gauge, 2.0 in., steel case, dry, 0100 PSI/0-700 kPa, brass-1/4 NPT, center back mount
Gauge, 2.0 in., steel case, dry, 0160 PSI/0-1,100 kPa, brass-1/4 NPT, center back mount
Gauge, 2.0 in., steel case, dry, 0200 PSI/0-1,400 kPa, brass-1/4 NPT, center back mount

1
1
1
1
1
1

0.20
0.20
0.20
0.20
0.20
0.20

<--->
<--->
<--->
<--->
<--->
<--->

ProSense 2.5 Steel Case / Brass Wetted Pressure Gauges

Part Number
G25-BDV-4LB
G25-BD30-4LB
G25-BD60-4LB
G25-BD100-4LB
G25-BD160-4LB
G25-BD200-4LB
G25-BD300-4LB
G25-BD600-4LB
G25-BD1000-4LB
G25-BDV-4CB
G25-BD30-4CB
G25-BD60-4CB
G25-BD100-4CB
G25-BD160-4CB
G25-BD200-4CB

Description

Pcs/Pkg

Wt(lb) Price

Gauge, 2.5 in., steel case, dry, -30 to 0 inHg/-100 to 0 kPa, vacuum, brass-1/4 NPT, lower mount
Gauge, 2.5 in., steel case, dry, 030 PSI/0-200 kPa, brass-1/4 NPT, lower mount
Gauge, 2.5 in., steel case, dry, 060 PSI/0-400 kPa, brass-1/4 NPT, lower mount
Gauge, 2.5 in., steel case, dry, 0100 PSI/0-700 kPa, brass-1/4 NPT, lower mount
Gauge, 2.5 in., steel case, dry, 0160 PSI/0-1,100 kPa, brass-1/4 NPT, lower mount
Gauge, 2.5 in., steel case, dry, 0200 PSI/0-1,400 kPa, brass-1/4 NPT, lower mount
Gauge, 2.5 in., steel case, dry, 0300 PSI/0-2,000 kPa, brass-1/4 NPT, lower mount
Gauge, 2.5 in., steel case, dry, 0600 PSI/0-4,200 kPa, brass-1/4 NPT, lower mount
Gauge, 2.5 in., steel case, dry, 01000 PSI/0-7,000 kPa, brass-1/4 NPT, lower mount

1
1
1
1
1
1
1
1
1

0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30

<--->
<--->
<--->
<--->
<--->
<--->
<--->
<--->
<--->

Gauge, 2.5 in., steel case, dry, -30 to 0 inHg/-100 to 0 kPa vacuum, brass-1/4 NPT, center back mount
Gauge, 2.5 in., steel case, dry, 030 PSI/0-200 kPa, brass-1/4 NPT, center back mount
Gauge, 2.5 in., steel case, dry, 060 PSI/0-400 kPa, brass-1/4 NPT, center back mount
Gauge, 2.5 in., steel case, dry, 0100 PSI/0-700 kPa, brass-1/4 NPT, center back mount
Gauge, 2.5 in., steel case, dry, 0160 PSI/0-1,100 kPa, brass-1/4 NPT, center back mount
Gauge, 2.5 in., steel case, dry, 0200 PSI/0-1,400 kPa, brass-1/4 NPT, center back mount

1
1
1
1
1
1

0.30
0.30
0.30
0.30
0.30
0.30

<--->
<--->
<--->
<--->
<--->
<--->
Volume 14

w w w. a u to m a t i o n d i re c t . c o m / p res s u re - s e n s o rs

C-more &
other HMI

Soft
Starters

ProSense 2 Steel Case / Brass Wetted Pressure Gauges

Part Number
G20-BDV-4LB
G20-BD30-4LB
G20-BD60-4LB
G20-BD100-4LB
G20-BD160-4LB
G20-BD200-4LB
G20-BDV-4CB
G20-BD30-4CB
G20-BD60-4CB
G20-BD100-4CB
G20-BD160-4CB
G20-BD200-4CB

Software

Drives

ProSense 1.5 Steel Case / Brass Wetted Pressure Gauges

Part Number
G15-BDV-8LB
G15-BD30-8LB
G15-BD60-8LB
G15-BD100-8LB
G15-BD160-8LB
G15-BD200-8LB
G15-BDV-8CB
G15-BD30-8CB
G15-BD60-8CB
G15-BD100-8CB
G15-BD160-8CB
G15-BD200-8CB

Field I/O

Sensors

e23-23

Steppers/
Servos
Motor
Controls
Proximity
Sensors
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index
Part #
Index

Steel Case / Brass Wetted

Pressure Gauges
ProSense Steel Case / Brass Wetted Gauges Specifications
Dial Size
Case
Lens
Ring
Socket
Connection
Fill Liquid
Bourdon Tube
Movement
Pointer
Welding
Over Pressure Limit
Working Pressure
Ambient/Process Temperature
Accuracy
Enclosure Rating

1.5 [40 mm]

1/8 NPT

2.0 [50 mm]

Steel, Painted Black
Polycarbonate
Steel, Painted Black
Brass
1/4 NPT
None
Phosphor Bronze
Brass
Aluminum, Painted Black
Silver Alloy
125% of full scale
Maximum 75% of full scale value
-40 F to 150 F (-40 C to 65 C)
3-2-3% ANSI/ASME Grade B
IP52

2.5 [63 mm]

1/4 NPT

WARNING: CHECK THE CHEMICAL COMPATIBILITY OF THE GAUGES WETTED PARTS WITH THE MEDIUM TO BE
MEASURED. USE A SUITABLE THREAD SEALANT SUCH AS TEFLON TAPE. ALWAYS TIGHTEN WITH AN OPEN END OR ADJUSTABLE WRENCH
ON THE WRENCH FLATS. NEVER USE ANY PART OF THE PRESSURE GAUGE TO TIGHTEN OTHER THAN THE WRENCH FLATS THAT ARE ON THE
GAUGE SOCKET. FAILURE TO DO SO WILL SEVERELY DAMAGE THE PRESSURE GAUGE.

Dimensions

Lower Mount
Dimensions - Lower Mount Gauges
Dial
A
B
C
D
E
F
G

1.5 [40 mm] 2.0 [50 mm] 2.5 [63 mm]

2.300 [58.4 mm]

2.992 [76.0 mm] 3.189 [81.0 mm}

1.653 [42.0 mm}

2.190 [55.6 mm] 2.488 [63.2 mm]

1.000 [25.4 mm]

1.161 [29.5 mm] 1.102 [28.0 mm]

0.300 [7.6 mm]

0.378 [9.6 mm]

1.617 [41.0 mm]

2.126 [54.0 mm] 2.441 [62.0 mm]

0.315 [8.0 mm]

0.394 [10.0 mm] 0.433 [11.0 mm]

1/8 NPT

1/4 NPT

0.394 [10.0 mm]

1/4 NPT

Center Back Mount

Dimensions - Center Back Mount Gauges
Dial
A
B
C
D
E
F

1.5 [40 mm] 2.0 [50 mm] 2.5 [63 mm]

1.515 [38.5 mm]

1.850 [47.0 mm] 1.850 [47.0 mm}

1.660 [42.1 mm}

2.070 [52.5 mm] 2.500 [63.4 mm]

0.975 [24.6 mm]

1.079 [27.4 mm] 1.079 [27.4 mm]

0.320 [8.1 mm]

1.620 [41.1 mm]
1/8 NPT

0.394 [10 mm]

0.394 [10.0 mm]

2.008 [51.0 mm] 2.421 [61.5 mm]

1/4 NPT

1/4 NPT

Volume 14

e23-24

Sensors

1 - 80 0 - 633 - 0405

Stainless Steel Case / Brass

Wetted Pressure Gauges
Liquid Filled Case
Lower Mount

Liquid Filled Case

Center Back Mount

Features

Brass wetted parts for use with air,

oil, water and non-corrosive liquids

Company
Information
Systems
Overview

Applications

Restricted orifice to dampen

pressure surges

Programmable
Controllers

Ideal for pumps, compressors,

hydraulic presses, machinery,
pneumatic equipment and motors
in harsh environments

Dual scale (psi/kPa)

Drives

Glycerin filled case to reduce

needle fluctuations due to vibration

Soft
Starters

1.5% of full scale value accuracy

Motors &
Gearbox

5 year warranty

Steppers/
Servos

ProSense 2.5 Stainless Steel Case / Brass Wetted Glycerin Filled Pressure Gauges
Description

G25-SLV-4CB
G25-SL30-4CB
G25-SL60-4CB
G25-SL100-4CB
G25-SL160-4CB
G25-SL200-4CB
G25-SL300-4CB
G25-SL600-4CB
G25-SL1000-4CB
G25-SL1500-4CB
G25-SL2000-4CB
G25-SL3000-4CB
G25-SL6000-4CB

Software
C-more &
other HMI

Crimp-on bezel

Part Number
G25-SLV-4LB
G25-SL30-4LB
G25-SL60-4LB
G25-SL100-4LB
G25-SL160-4LB
G25-SL200-4LB
G25-SL300-4LB
G25-SL600-4LB
G25-SL1000-4LB
G25-SL1500-4LB
G25-SL2000-4LB
G25-SL3000-4LB
G25-SL6000-4LB

Field I/O

Pcs/Pkg

Wt(lb) Price

Gauge, 2.5 in., SS Case, liquid fill, -30 to 0 inHg vacuum/-100 to 0 kPa vacuum, brass-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-30 PSI/0-200 kPa, brass-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-60 PSI/0-420 kPa, brass-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-100 PSI/0-700 kPa, brass-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-160 PSI/0-1,100 kPa, brass-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-200 PSI/0-1,400 kPa, brass-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-300 PSI/0-2,000 kPa, brass-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-600 PSI/0-4,200 kPa, brass-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-1000 PSI/0-7,000 kPa, brass-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-1500 PSI/0-10,000 kPa, brass-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-2000 PSI/0-14,000 kPa, brass-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-3000 PSI/0-21,000 kPa, brass-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-6000 PSI/0-42,000 kPa, brass-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, -30 to 0 inHg vacuum/-100 to 0 kPa vacuum, brass-1/4 NPT, center back mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-30 PSI/0-200 kPa, brass-1/4 NPT, center back mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-60 PSI/0-420 kPa, brass-1/4 NPT, center back mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-100 PSI/0-700 kPa, brass-1/4 NPT, center back mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-160 PSI/0-1,100 kPa, brass-1/4 NPT, center back mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-200 PSI/0-1,400 kPa, brass-1/4 NPT, center back mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-300 PSI/0-2,000 kPa, brass-1/4 NPT, center back mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-600 PSI/0-4,200 kPa, brass-1/4 NPT, center back mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-1000 PSI/0-7,000 kPa, brass-1/4 NPT, center back mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-1500 PSI/0-10,000 kPa, brass-1/4 NPT, center back mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-2000 PSI/0-14,000 kPa, brass-1/4 NPT, center back mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-3000 PSI/0-21,000 kPa, brass-1/4 NPT, center back mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-6000 PSI/0-42,000 kPa, brass-1/4 NPT, center back mount

0.5

<--->

Motor
Controls
Proximity
Sensors
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index

Volume 14

w w w. a u to m a t i o n d i re c t . c o m / p res s u re - s e n s o rs

Sensors

e23-25

Part #
Index

Stainless Steel Case / Brass Wetted

Pressure Gauges
ProSense Stainless Steel Case / Brass Wetted Glycerin-filled Gauges Specifications
Dial Size
Case
Lens
Ring
Socket
Connection
Fill Liquid
Bourdon Tube
Movement
Pointer
Welding
Over Pressure Limit
Gasket Material
Working Pressure
Ambient/Process Temperature
Accuracy
Enclosure Rating

2.5 [63.5 mm]

AISI 304 SS
Polycarbonate
AISI 304 SS, Crimp-On
Brass
1/4 NPT
Glycerin
Phosphor Bronze C-shaped for pressures up to and including 600 psi (4,147 kPa),
AISI 316 SS C-shaped for 1000 psi (6,895 kPa),
AISI 316 SS spiral for pressures above 1000 psi (6,895 kPa)
OT 59 brass
Aluminum, anodized black
Tin/cooper alloy for pressures up to 600 psi (4,147 kPa),
316 SS TIG Argon arc for pressures 600 psi (4,147 kPa) and above
125% of full scale up to 1,400 psi (9,653 kPa), 115% of full scale over 1,400 psi (9,653 kPa)
Silicone rubber for socket; EPDM for lens, filling plug and blow-out vent
Maximum 75% of full scale value
-4 F to 150 F (-20 C to 65 C)
1.5% of full scale value
IP65

WARNING: CHECK THE CHEMICAL COMPATIBILITY OF THE GAUGES WETTED PARTS WITH THE MEDIUM TO BE
MEASURED. USE A SUITABLE THREAD SEALANT SUCH AS TEFLON TAPE. ALWAYS TIGHTEN WITH AN OPEN END OR ADJUSTABLE WRENCH
ON THE WRENCH FLATS. NEVER USE ANY PART OF THE PRESSURE GAUGE TO TIGHTEN OTHER THAN THE WRENCH FLATS THAT ARE ON THE
GAUGE SOCKET. FAILURE TO DO SO WILL SEVERELY DAMAGE THE PRESSURE GAUGE.
DUE TO PRESSURE BUILDUP, SOME GAUGES (USUALLY LOWER PRESSURE RANGES SUCH AS VACUUM, UP TO 100 PSI) MAY REFLECT A READING
THAT IS SLIGHTLY "OFF ZERO". TO PROPERLY "VENT" THE PRESSURE GAUGE TO ATMOSPHERE, MAKE A SMALL HOLE IN THE FILL PLUG AFTER
YOU HAVE INSTALLED THE INSTRUMENT.

Dimensions

Lower Mount
Dimensions - Lower Mount Gauge
A
B
C
D
E
F
G
H

2.190 [55.6 mm}

2.700 [68.5 mm]
0.433 [11.0 mm]
0.250 [6.3 mm]
2.440 [61.9 mm]
1.035 [26.3 mm]
1/4 NPT
0.551 [14.0 mm]

Center Back Mount

Dimensions - Center Back Mount Gauge
A
B
C
D
E
F
G

2.264 [57.5 mm}

2.7 [68.5 mm]
1.175 [29.8 mm]
0.210 [5.3 mm]
2.445 [62 mm]
0.551 [14.0 mm]
1/4 NPT

Volume 14

e23-26

Sensors

1 - 80 0 - 633 - 0405

Stainless Steel Case / Stainless

Steel Wetted Pressure Gauges
Dry and Liquid Filled Cases
Lower Mount
Center Back Mount

Features

Stainless steel wetted parts for use

with air, oil, water and corrosive
liquids

Company
Information
Systems
Overview

Applications

Restricted orifice to dampen pressure surges

Programmable
Controllers

Ideal for pumps, compressors,

hydraulic presses, machinery,
pneumatic equipment and motors
in harsh environments

Field I/O
Software
C-more &
other HMI

Crimp-on bezel
Dual scale (psi/kPa)

Drives

Dry or glycerin filled case to reduce

needle fluctuations due to vibration

Soft
Starters

1.5% of full scale value accuracy

Motors &
Gearbox

5 year warranty

Steppers/
Servos

ProSense 2.5 All Stainless Steel Pressure Gauges

Part Number
G25-SDV-4LS
G25-SD30-4LS
G25-SD60-4LS
G25-SD100-4LS
G25-SD160-4LS
G25-SD200-4LS
G25-SD300-4LS
G25-SD600-4LS
G25-SD1000-4LS

Description

G25-SDV-4CS
G25-SD30-4CS
G25-SD60-4CS
G25-SD100-4CS
G25-SD160-4CS
G25-SD200-4CS

Pcs/Pkg

Wt(lb) Price

Gauge, 2.5 in., SS Case, dry, -30 to 0 inHg/-100 to 0 kPa vacuum, SS-1/4 NPT, lower mount

0.4

<--->

Gauge, 2.5 in., SS Case, dry, 0-30 PSI/0-200 kPa, SS-1/4 NPT, lower mount

0.4

<--->

Gauge, 2.5 in., SS Case, dry, 0-60 PSI/0-420 kPa, SS-1/4 NPT, lower mount

0.4

<--->

Gauge, 2.5 in., SS Case, dry, 0-100 PSI/0-700 kPa, SS-1/4 NPT, lower mount

0.4

<--->

Gauge, 2.5 in., SS Case, dry, 0-160 PSI/0-1,100 kPa, SS-1/4 NPT, lower mount

0.4

<--->

Gauge, 2.5 in., SS Case, dry, 0-200 PSI/0-1,400 kPa, SS-1/4 NPT, lower mount

0.4

<--->

Gauge, 2.5 in., SS Case, dry, 0-300 PSI/0-2,000 kPa, SS-1/4 NPT, lower mount

0.4

<--->

Gauge, 2.5 in., SS Case, dry, 0-600 PSI/0-4,200 kPa, SS-1/4 NPT, lower mount

0.4

<--->

Gauge, 2.5 in., SS Case, dry, 0-1000 PSI/0-7,000 kPa, SS-1/4 NPT, lower mount

0.4

<--->

Gauge, 2.5 in., SS Case, dry, -30 to 0 inHg/-100 to 0 kPa vacuum, SS-1/4 NPT, center back mount

0.4

<--->

Gauge, 2.5 in., SS Case, dry, 0-30 PS/0-200 kPa, SS-1/4 NPT, center back mount

0.4

<--->

Gauge, 2.5 in., SS Case, dry, 0-60 PSI/0-420 kPa, SS-1/4 NPT, center back mount

0.4

<--->

Gauge, 2.5 in., SS Case, dry, 0-100 PSI/0-700 kPa, SS-1/4 NPT, center back mount

0.4

<--->

Gauge, 2.5 in., SS Case, dry, 0-160 PSI/0-1,100 kPa, SS-1/4 NPT, center back mount

0.4

<--->

Gauge, 2.5 in., SS Case, dry, 0-200 PSI/0-1,400 kPa, SS-1/4 NPT, center back mount

0.4

<--->

ProSense 2.5 All Stainless Steel Steel Glycerin Filled Pressure Gauges
Part Number
G25-SLV-4LS
G25-SL30-4LS
G25-SL60-4LS
G25-SL100-4LS
G25-SL160-4LS
G25-SL200-4LS
G25-SL300-4LS
G25-SL600-4LS
G25-SL1000-4LS

Description

G25-SLV-4CS
G25-SL30-4CS
G25-SL60-4CS
G25-SL100-4CS
G25-SL160-4CS
G25-SL200-4CS

Pcs/Pkg

Wt(lb) Price

Motor
Controls
Proximity
Sensors
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.

Gauge, 2.5 in., SS Case, liquid fill, -30 to 0 inHg/-100 to 0 kPa vacuum, SS-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-30 PSI/0-200 kPa, SS-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-60 PSI/0-420 kPa, SS-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-100 PSI/0-700 kPa, SS-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-160 PSI/0-1,100 kPa, SS-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-200 PSI/0-1,400 kPa, SS-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-300 PSI/0-2,000 kPa, SS-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-600 PSI/0-4,200 kPa, SS-1/4 NPT, lower mount

0.5

<--->

Enclosures

Gauge, 2.5 in., SS Case, liquid fill, 0-1000 PSI/0-7,000 kPa, SS-1/4 NPT, lower mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, -30 to 0 inHg/-100 to 0 kPa vacuum, SS-1/4 NPT, center back mount

0.5

<--->

Tools

Gauge, 2.5 in., SS Case, liquid fill, 0-30 PSI/0-200 kPa, SS-1/4 NPT, center back mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-60 PSI/0-420 kPa, SS-1/4 NPT, center back mount

0.5

<--->

Safety

Gauge, 2.5 in., SS Case, liquid fill, 0-100 PSI/0-700 kPa, SS-1/4 NPT, center back mount

0.5

<--->

Gauge, 2.5 in., SS Case, liquid fill, 0-160 PSI/0-1,100 kPa, SS-1/4 NPT, center back mount

0.5

<--->

Appendix

Gauge, 2.5 in., SS Case, liquid fill, 0-200 PSI/0-1,400 kPa, SS-1/4 NPT, center back mount

0.5

<--->

Volume 14

w w w. a u to m a t i o n d i re c t . c o m / p res s u re - s e n s o rs

Sensors

e23-27

Terminal
Blocks &
Wiring
Power
Circuit
Protection

Pneumatics

Product
Index
Part #
Index

Stainless Steel Case / Stainless

Steel Wetted Pressure Gauges
ProSense All Stainless Steel Gauges Specifications
Dial Size
Case
Lens
Ring
Socket
Connection
Fill Liquid
Bourdon Tube
Movement
Pointer
Welding
Over Pressure Limit
Gasket Material
Working Pressure
Ambient/Process Temperature
Accuracy
Enclosure Rating

2.5 [63 mm]

AISI 304 SS
Polycarbonate
AISI 304 SS, Crimp-On
AISI 316 SS
1/4 NPT
Dry = None / Liquid Fill = Glycerin
AISI 316 SS C-shaped for pressures up to 1000 psi (6,895 kPa)
Brass
Aluminum, anodized black
316 SS TIG Argon arc
125% of full scale
Silicone rubber for socket; EPDM for lens, filling plug and blow-out vent (Liquid fill models)
Maximum 75% of full scale value
-4 F to 150 F (-20 C to 65 C)
1.5% of full scale value
IP65

WARNING: CHECK THE CHEMICAL COMPATIBILITY OF THE GAUGES WETTED PARTS WITH THE MEDIUM TO BE
MEASURED. USE A SUITABLE THREAD SEALANT SUCH AS TEFLON TAPE. ALWAYS TIGHTEN WITH AN OPEN END OR ADJUSTABLE WRENCH
ON THE WRENCH FLATS. NEVER USE ANY PART OF THE PRESSURE GAUGE TO TIGHTEN OTHER THAN THE WRENCH FLATS THAT ARE ON THE
GAUGE SOCKET. FAILURE TO DO SO WILL SEVERELY DAMAGE THE PRESSURE GAUGE.
DUE TO PRESSURE BUILDUP, SOME GAUGES (USUALLY LOWER PRESSURE RANGES SUCH AS VACUUM, UP TO 100 PSI) MAY REFLECT A READING
THAT IS SLIGHTLY "OFF ZERO". TO PROPERLY "VENT" THE PRESSURE GAUGE TO ATMOSPHERE, MAKE A SMALL HOLE IN THE FILL PLUG AFTER
YOU HAVE INSTALLED THE INSTRUMENT.

Dimensions
Lower Mount
Dimensions - Lower Mount Gauge
A
B
C
D
E
F
G
H

2.190 [55.6 mm}

2.700 [68.5 mm]
0.433 [11.0 mm]
0.250 [6.3 mm]
2.440 [61.9 mm]
1.035 [26.3 mm]
1/4 NPT
0.551 [14.0 mm]

Center Back Mount

Dimensions - Center Back Mount Gauge
A
B
C
D
E
F
G

2.264 [57.5 mm}

2.7 [68.5 mm]
1.175 [29.8 mm]
0.210 [5.3 mm]
2.445 [62 mm]
0.551 [14.0 mm]
1/4 NPT

Volume 14

e23-28

Sensors

1 - 80 0 - 633 - 0405