This document contains multiple choice and open-ended questions about various technical aspects of LTE networks, including:
1. Technologies used in DLCOMP features, resources gained from ULCOMP features, and applications that suggest turning on DRX features.
2. Recommended carrier aggregation configurations for intra-eNodeB scenarios with different coverage frequencies under the same cell.
3. Solutions that include carrier addition, ASP site addition, and multi-sector approaches.
4. Types of data needed for xMbps planning, such as engineering parameters, nodeB performance data, and eNodeB configuration data.
5. Scenarios supported by ACP, including antenna consolidation, daily optimization, and new
This document contains multiple choice and open-ended questions about various technical aspects of LTE networks, including:
1. Technologies used in DLCOMP features, resources gained from ULCOMP features, and applications that suggest turning on DRX features.
2. Recommended carrier aggregation configurations for intra-eNodeB scenarios with different coverage frequencies under the same cell.
3. Solutions that include carrier addition, ASP site addition, and multi-sector approaches.
4. Types of data needed for xMbps planning, such as engineering parameters, nodeB performance data, and eNodeB configuration data.
5. Scenarios supported by ACP, including antenna consolidation, daily optimization, and new
This document contains multiple choice and open-ended questions about various technical aspects of LTE networks, including:
1. Technologies used in DLCOMP features, resources gained from ULCOMP features, and applications that suggest turning on DRX features.
2. Recommended carrier aggregation configurations for intra-eNodeB scenarios with different coverage frequencies under the same cell.
3. Solutions that include carrier addition, ASP site addition, and multi-sector approaches.
4. Types of data needed for xMbps planning, such as engineering parameters, nodeB performance data, and eNodeB configuration data.
5. Scenarios supported by ACP, including antenna consolidation, daily optimization, and new
This document contains multiple choice and open-ended questions about various technical aspects of LTE networks, including:
1. Technologies used in DLCOMP features, resources gained from ULCOMP features, and applications that suggest turning on DRX features.
2. Recommended carrier aggregation configurations for intra-eNodeB scenarios with different coverage frequencies under the same cell.
3. Solutions that include carrier addition, ASP site addition, and multi-sector approaches.
4. Types of data needed for xMbps planning, such as engineering parameters, nodeB performance data, and eNodeB configuration data.
5. Scenarios supported by ACP, including antenna consolidation, daily optimization, and new
Download as DOCX, PDF, TXT or read online from Scribd
Download as docx, pdf, or txt
You are on page 1of 2
Multiple Choice Total 18 questions, 3 scores for each question
1. Which technologies are used in DLCOMP feature
A) CBF B) JT C) DCS D) Combined Receiver ---------------------------------------------------------------2. Where are the resource of Gain of ULCOMP feature A) Interference rejection B) Space multiplex C) Array Gain D) Power Combination Gain ---------------------------------------------------------------------3. Which Application suggest turn on DRX Feature? A) VoIP B) Web, Email, FTP C) Presence service D) ANR Measure -----------------------------------------------------------------4. For the Intra-eNodeB different-coverage carriers scenario, different frequencies under same cell have same azimuth, which are the recommended to be the CA configuration mode? A) CaGroup + Measurement based SCC B) CaGroup + Blind SCC C) High Frequency->Low FrequencyBlind CA Group Low Frequency->High Frequency: CaGroup +Measurement based SCC D) Adaptive CA + Blind SCC E) Adaptive CA Measurement based SCC -----------------------------------------------------------5. LTE xMbps solutions including: A. Carrier addition B. ASP site addition C. Multi sector -----------------------------------------------------------------
6. xMbps planning, which kind of data do we need?
A. Engineering parameter B. NodeB performance data C. CHR data D. eNodeB configuration data ------------------------------------------------------7. What RF parameter can be adjusted in ACP : A. power B. M-tilt C. E-tilt D. Azimuth E. height F. Antenna type --------------------------------------------------------------------8. How many types of traffic map in ACP planning and optimization Abased on clutter B. based on clutter and traffic Cbased on MR Dbased on MR and traffic
---------------------------------------------------------------------9. What scenarios does ACP support?
A. Antenna consolidation B. daily optimization C. New built & expansion ------------------------------------------------------------------------10. which solution is the voice service in LTE use the GU network to guarantee the voice experience: A.CSFB B.VOLTE&SRVCC C. Fast return to LTE after CSFB/SRVCC D.Mutil-carrier camp strategy in GUL network ---------------------------------------------------------------------------------11. Which one will cause the L2U redirection? A. Weak coverage or coverage hole B.MLB C. Over loading D. Limitation of Uplink power E.CSFB F.S1 down -------------------------------------------------------------------------------------12. The difference of redirection and PS Handover, which one is correct: A.PS HO not only need the support from LTE, but also need the support from UMTS and GSM, even core network. B.The interruption delay of redirection is smaller than PS HO and Cell Change Order, especially for voice service, it can ensure continuous service, also make the streaming service fluency. C. Redirection do not need the support from the target network, the GSM and UMTS network do not need the upgrade. After redirection to the target network, remain the IP connetion need the core network support IP context relocation, RAU and authentication. D. The mainstream terminals include the terminal with QualComm chips, Samsung and so on, support the redirection from LTE to GSM and UMTS. -----------------------------------------------------------------------------------------------------------------------------Question and Answer Total 7 questions, 46 scores 1. What kind of actions can be used to solve over-shooting problems? 3. Which two solutions we have for LTE ASP? And what scenario they apply to respectively? 4. In the ACP principles , what optimization objectives we can set according to different pattern(GUL)
6. Which HO event relate to GUL interoperation, and what is the detials function of every event? 7. What are the the common issue about RF in LTE SQI Data troubleshooting and locating?