Creating a new project Creating multi-sheet flat designs Copying work between projects Assigning reference designators Design checking Adding intersheet signal references Creating a Bill of Materials and other reports Adding part and net properties Creating a netlist for ORCAD Layout
Module 1
Introduction to CADANCE / ORCAD Software.
Getting started with Orcad Capture Learn about user interface. Learn about different tools of Orcad Capture Learn about Design Preparation. Building simple Schematics. Building multiple page schematics.
Module 2
Assigning reference designator (Annotation)
Design Rule checking (DRC error) Creation Bill Of Materials for design Creation of Pdf Documentation of Design
Module 3
Introduction to parts/symbol library
Accessing to default library Creating Parts & Symbol Preparing the design for layout (Net listing)
Course Syllabus Spectrum Embedded Solutions Copyright (2014) All Rights Reserved
OrCAD PCB Editor
Module 1: Library Development
Introduction to various DIP and Surface mount Component.
Learn about design preparation (libraries/Footprints). PADstack Designing. Creation of Footprints for DIP and SMD Devices.
Module 2: Getting Started
Getting started wi_ __ Allegro PCB Editor.
Preparation of board for layout using board wizard. Learn about user interface. Defining parameter of board (Constraint Manager). Learn about different tools of Orcad/Allegro PCB Editor
Module 3: Logic Import, Design Rules and Component Placement
Net listing/logic import from schematic to PCB
Component Placement
Module 4: Routing, Glossing and Copper Areas
Introduction to manual routing
Introduction to different parameter of perfect routing Finishing of routing (Glossing, unmitter) Introduction to copper pour for power plane. Checking the status of routing.
Module 5: Post Processing and Manufacturing Output
Assigning specific text (silkscreen) to design
Creating report of design. Creating manufacturing data (GERBER) for design Plotting of layout design for home production Creating Pdf documentation of design.
Module 6: Keys factor for reducing noise in PCB
Key factor for routing power track (VCC & GND).
Reducing Crosstalk effect. Reducing EMI effect.
Course Syllabus Spectrum Embedded Solutions Copyright (2014) All Rights Reserved
