Scribd
Upload
5K views4 pages

CSWP Seg.2

The document contains questions about configurations, mass properties, and modifications to a 3D part model in CSWP (Creo Parametric). There are existing configurations ("A", "B", "C") in the part. A new configuration "Z" is created based on "A" with a through hole suppressed in other configurations. The mass of the part is provided for configurations "Z" and "B". Further modifications are made to dimensions and features, and the resulting mass is queried for the new configurations and versions of the part.

Uploaded by

Emad Bassem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
5K views4 pages

CSWP Seg.2

The document contains questions about configurations, mass properties, and modifications to a 3D part model in CSWP (Creo Parametric). There are existing configurations ("A", "B", "C") in the part. A new configuration "Z" is created based on "A" with a through hole suppressed in other configurations. The mass of the part is provided for configurations "Z" and "B". Further modifications are made to dimensions and features, and the resulting mass is queried for the new configurations and versions of the part.

Uploaded by

Emad Bassem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

______________________________________

Let`s GoCSWP

Q.No.2:
Existing configurations
Unit system: MMGS
Decimal places: 2
How many existing configurations are there in this part?

Q.No.3:
Switch to configuration C
What is the mass of the part (Grams)?

Q.No.4:
Create new configuration named Z base on configuration A.
Create a through hole as indicated in the image that will be
suppressed in all other configurations except for Z and B.
Remaining in configuration Z measure the mass of the part.
What is the mass of the part (Grams)?
2086.27
1902.59
2327.08
1079.47

Q.No.5:
Switch back to configuration B.
What is the mass of the part (Gram)?

______________________________________

Let`s GoCSWP

Q.No.6:
Remain in configuration B.
Create a design table using the auto-create option.
Create a new configuration E by copying the row of
configuration B in the design table and pasting a new row.
Change the following parameters in the design table for
configurationE to the following specified values:
Diameter@keysketch = 25
$HW-SIZE@ (9) Diameter Hole1 =9.5
D1@Sketch11 =9
$HW-SIZE (20.5) Diameter Hole1 =21
D1@Sketch 14 =34
What is the mass of the part (Grams)?
Q.No.8:
Modify the starting part by changing the height
of the cylindrical end from 35 mm to 25 mm. the
resultant part is labeled as part 2 in the images.
What is the mass of the part (Grams)?

Q.No.9:
Change the wall thickness of the main handle
area.
What is the mass of the part (Grams)?

______________________________________

Let`s GoCSWP

Q.No.10:
Modify wall thickness of the handle area of the part from 3 mm to 5.5 mm.
Modify the height of the cylindrical portion of the part.
What is the mass of the part (Grams)?

______________________________________

Let`s GoCSWP

Q.No.11:
Modify the handle as shown in the images.
What is the mass of the part?

You might also like