Scribd
Upload
37 views

Course Name Fluid Mechanics Department Chemical Engineering IIT Kanpur Instructor Dr. Nishith Verma

This document describes an online fluid mechanics course offered by IIT Kanpur. The course is taught by Dr. Nishith Verma and covers fundamental concepts of fluid statics, motions, and governing equations. It also discusses applications to unit operations in chemical engineering like filtration, agitation, and air-particle separation. The first lecture defines a fluid and introduces Newton's law of viscosity, which states that the shear stress on a fluid is proportional to the rate of shear strain or deformation. Suggested textbooks are also provided.

Uploaded by

Madhuri Gupta
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
37 views

Course Name Fluid Mechanics Department Chemical Engineering IIT Kanpur Instructor Dr. Nishith Verma

This document describes an online fluid mechanics course offered by IIT Kanpur. The course is taught by Dr. Nishith Verma and covers fundamental concepts of fluid statics, motions, and governing equations. It also discusses applications to unit operations in chemical engineering like filtration, agitation, and air-particle separation. The first lecture defines a fluid and introduces Newton's law of viscosity, which states that the shear stress on a fluid is proportional to the rate of shear strain or deformation. Suggested textbooks are also provided.

Uploaded by

Madhuri Gupta
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

NPTEL Online - IIT Kanpur

Course Name

Fluid Mechanics

Department

Chemical
Engineering
IIT Kanpur

Instructor

Dr. Nishith Verma

file:///D|/Web%20Course/Dr.%20Nishith%20Verma/local%20server/fluid_mechanics/lecture1/main.html[5/9/2012 2:57:12 PM]

Objectives_template

Suggested text books:


1. Fluid Mechanics and its Applications
(Gupta and Gupta)
New Age international (P) Ltd, New Delhi, 5 th Reprint
2. Introduction to Fluid Mechanics
(Fox and McDonald)
Wiley, NY, 5 th ed.
3. Unit Operations in Chemical Engineering
(McCabe, Smith, Harriot)
McGraw Hill, NY, 3 th ed.

file:///D|/Web%20Course/Dr.%20Nishith%20Verma/local%20server/fluid_mechanics/lecture1/1_1a.htm[5/9/2012 2:57:12 PM]

Objectives_template

Module 1: Introduction
Lecture 1: Definition of a fluid and Newtons' law of viscosity

Introduction
Definition of fluid
Newton's law of viscosity

file:///D|/Web%20Course/Dr.%20Nishith%20Verma/local%20server/fluid_mechanics/lecture1/1_1.htm[5/9/2012 2:57:13 PM]

Objectives_template

Module 1: Introduction
Lecture 1: Definition of a fluid and Newtons' law of viscosity
Introduction
Fluid mechanics: Subject that deals with the study of the behavior of a fluid either at rest or in
motion.
At this level (undergraduate 2 nd year B. Tech. Chemical Engineering), it is expected that the
students learn
Fundamental concept of fluid statics and motions, including governing equations that describe
the basic principles
Pressure-drop calculations for a tubular flow, and flow in packed-beds of solid particles
Application of the basic knowledge of fluid mechanics in understanding the momentum
transfer based chemical engineering unit operations (UOPs), in particular
Filtration
Agitation
Air-particles separation (cyclone)

file:///D|/Web%20Course/Dr.%20Nishith%20Verma/local%20server/fluid_mechanics/lecture1/1_2.htm[5/9/2012 2:57:13 PM]

Objectives_template

Module 1: Introduction
Lecture 1: Definition of a fluid and Newtons' law of viscosity
Definition of fluid
In the present context of fluid mechanics, it is important to distinguish the behavior of a fluid from that
of a solid when subjected to a shear force (parallel to its surface).
Consider a solid element ABCD' shown below (Fig 1a). The bottom section A B is fixed. A small
horizontal force is applied on the surface CD. The surface is sheared'. The element CD deforms into
C'D' and then, into CD. However, an equilibrium position is achieved when the deformation stops.
The top layer is now stationary. The solid has, therefore, resisted the applied shear force.

(Fig. 1a )

file:///D|/Web%20Course/Dr.%20Nishith%20Verma/local%20server/fluid_mechanics/lecture1/1_3.htm[5/9/2012 2:57:13 PM]

Objectives_template

Module 1: Introduction
Lecture 1: Definition of a fluid and Newtons' law of viscosity
Now, consider a fluid element ABCD' shown in Fig 1b. On the application of a shear force (no
matter how small it is!), the top surface CD will continue to move as long as the force is applied.
There will not be equilibrium' position of any fluid element on the surface CD. Such behavior has
been validated experimentally, using a dye- marker test.

(Fig. 1b )

file:///D|/Web%20Course/Dr.%20Nishith%20Verma/local%20server/fluid_mechanics/lecture1/1_4.htm[5/9/2012 2:57:13 PM]

Objectives_template

Module 1: Introduction
Lecture 1: Definition of a fluid and Newtons' law of viscosity
We conclude
Fluid continues to deform (or move) under the application of a shear force.
Fluid at rest cannot sustain a shear stress.
Fluid resists deformation by attaining an equilibrium rate of deformation.
Viscosity is a property of the fluid which relates its resistance to the applied shear force.

Newton's law of viscosity


A class of fluids called Newtonian fluids such as water and air follow the behavior: applied shear
stress varies linearly with the rate of deformation. The mathematical representation is

for 1D-flow

file:///D|/Web%20Course/Dr.%20Nishith%20Verma/local%20server/fluid_mechanics/lecture1/1_5.htm[5/9/2012 2:57:13 PM]

You might also like