SmartLine

Technical Information

SLG 700 SmartLine Guided-Wave Radar

Level Specification
34-SL-03-03, August 2016
Introduction
Part of the SmartLine family of products, the SLG 700
series level transmitters feature high performance guided
wave radar level technology. They provide high accuracy,
stability, and applicability suitable for a variety of level and
interface applications. SmartLine SLG 700 level transmitters
are ideally suited for your demanding process tank level
needs.
The SmartLine Level transmitter features the same powerful
features with the other transmitters in the SmartLine family
including modular design, polarity insensitivity, transmitter
messaging, tamper notification, and integration with
Experion PKS thus providing the highest level of
compatibility assurance and integration capabilities.
A new SmartLine Application and Validation Tool provides a
new level of user experience and increases engineering
productivity.
Best in Class Features:
o

Two-wire, loop-powered 4-20 mA transmitter

Accuracy 3 mm or 0.03% of measured distance

whichever is greater

Repeatability 1mm

Integral dual seal design for safety based on

Figure 1 - SLG 700 SmartLine Level Transmitter

Best in Class Features (continued):

ANSI/NFPA 70-202 and ANSI/ISA 12.27.01

4-20 mA, HART and Foundation Fieldbus output

Temperature range: -60 to 450C

External zero, span, & configuration capability

Pressure range: -1 to 400 bar

0.4 to 50 m range

SS316L or Hastelloy-C (C-276) wetted parts

Automatic temperature compensation

Advanced local display and local push buttons

Communications / Output Options:

o 4-20 mA DC

(optional)
o

Polarity insensitive electrical connections

Comprehensive on-board diagnostic capabilities

Full compliance to SIL 2/3 requirements as a standard

Modular design

Dual compartment design

o HART (version 7.0)

o FOUNDATION Fieldbus
SmartLine Level transmitters are available with the
above listed communications protocols.

SLG 700 SmartLine Level Transmitter

Figure 2 - Inserting tank specific details into Application and Validation Tool.

Description
The SmartLine Guided Wave Radar Level transmitter
utilizes Time Domain Reflectometry (TDR) technology
which is proven to be effective for a majority of level
measuring applications.

Unique Out-of-the-Box, Fool Proof User

Experience
The user experience of the SmartLine Level transmitter
addresses one of the most common failure modes
associated with specifying, ordering and implementing level
transmitters, which is the specification of the correct level
transmitter for the tank level application. Unique to the
SmartLine Level offering is a new, online SmartLine
Application and Validation Tool (AVT), which allows users
to specify their tank level application and the options
desired for their level transmitter. The AVT intelligently
guides the user through the engineering process and
electronically captures and documents the choices and
inputs.

In addition to serving as engineering documentation, the

AVT output also serves as input to the Honeywell order
management system thus ensuring correct input of the
transmitter model and the advantage of a transmitter with
configuration parameters already specified to match the
targeted tank application. Errors are eliminated and the
engineering effort is preserved from start to finish.
The SmartLine Application and Validation Tool also allows
users to collaboratively use and share the active session
with any web connected colleague or expert. This
interactive, collaborative capability eliminates roadblocks
and delays, thus users can access resources to help start
and finish the engineering task in a single effort. This online
tool also dynamically reformats the user interface to
correctly display on an Apple iPad, iPhone or Android
device.

SLG 700 SmartLine Level Transmitter

Unique Indication/Display Options

Modular Design

The SmartLine SLG series level transmitters modular

design accommodates a unique advanced graphics LCD
display with many unparalleled features (as an option).

To help contain maintenance and inventory costs, all SLG

series transmitters are modular in design supporting the
users ability to change electronic modules without affecting
overall performance or approval body certifications.
Electronic modules may be swapped with another electronics
module without losing in-tolerance performance
characteristics.
Modular Features
o Exchange / replace electronics / comms modules
o Add or remove lightning protection (terminal connection)
With no performance effects, Honeywells unique modularity
results in lower inventory needs and lower overall
operating costs.

Configuration Tools

Advanced Graphics LCD Display Features

o Modular (may be added or removed in the field)
o 0, 90, 180, & 270 degree position adjustments
o Standard and custom measurement units available.
(custom measurement units applicable only for FF)
o Eight display screens with 3 formats are possible
o 128 by 64 dot matrix graphics display
o Large PV, Bar graph and Trend graph format
supported (for any of the 8 screens). Echo stem plots
with Distance to Product and Distance to Interface
Configurable screen rotation timing

The Display supports English, German,

French, Spanish, Italian, Turkish & Russian

Diagnostics
SmartLine transmitters all offer digitally accessible
diagnostics which aid in providing advanced warning of
possible failure events minimizing unplanned shutdowns,
providing lower overall operational costs

System Integration
o

SmartLine communications protocols all meet the most

current published standards for HART or FOUNDATION
Fieldbus.

Integration with Honeywells Experion PKS offers the

following unique advantages.

Transmitter messaging

Maintenance mode indication

Tamper reporting

FDM Plant Area Views with Health summaries

The SLG series is Experion tested to provide the

highest level of compatibility assurance.

Integral Three Button Configuration Option

Suitable for all electrical and environmental requirements,
SmartLine offers the ability to configure the transmitter and
display via three externally accessible buttons. Zero or
span capabilities are also optionally available via these
buttons, without selection of a display option.
Hand Held Configuration
SmartLine transmitters feature two-way communication and
configuration capability between the operator and the
transmitter. This is accomplished via Honeywells field-rated
Multiple Communication Configurator (MCT202 and
MCT404).
The MCT202 and 404 are capable of field configuring DE and
HART Devices and can also be ordered for use in intrinsically
safe environments. All Honeywell transmitters are designed
and tested for compliance with the offered communication
protocols and are designed to operate with any properly
validated hand held configuration device.
Field Service Tool DTM based technology
SmartLine Level utilizes the standard unified DTM
technology to access device parameters but utilizes its
fullest potential in the creation of our new Field Service
Tool. Using a commonly available DTM container, the
SmartLine Level Field Service Tool provides both a novice
mode and an expert user mode. Novice users are offered a
guided experience to setup the device parameters while
expert users can easily access the parameters desired
through the organized parameter pages. The Field Service
Tool runs on any PC and avoids the need for a handheld
configurator.
Personal Computer Configuration
Honeywells Field Device Manager (FDM) Software and FDM
Express are available for managing HART & FOUNDATION
Fieldbus device configurations.

General Specifications
Parameter

SLG 700 SmartLine Level Transmitter

Description

Measurable media

Liquids and solids (future)

Measurements performed

Level, volume, interface

Process Storage Tank types

Vertical and horizontal cylinders, rectangular tanks, spheres, stilling / bypass wells

SIL certification

SIL 2/3

Measuring range

Liquids

Available probe types

Rod, wire, coax

Wetted materials

SS 316L, C-276, PTFE (future)

O-Ring Seal Materials

Material

Please see Figure 4

0.4 to 50 m (1.3 to 164 ft)

Min Temp

Max Temp

Viton or Fluorocarbon

-26 degC

200 deg C

Ethyelene Propylene (EPDM)

-40 degC

150 deg C

Kalrez 6375 perfluorelastomer

-20 degC

200 degC (sat steam max 150 degC)

Buna-N

-40 degC

120 degC

Metallic - 17-4 PH

-60 degC

450 degC

Metallic - Alloy 718 NACE

-60 degC

450 degC

Pure polyester powder-coated low copper (<0.6%) aluminum

Electronic Housing

Meets NEMA 4X, IP66, IP67

All stainless steel housing and remote electronics (with 3 m cable) is optional

User Interface

3 button keypad

Display

128 x 64 pixels LCD

Output Units

Level: ft, in, m, cm, or mm

Volume: ft3, in3, US gal, Imp gal, barrels, yd3, m3, liters
Rate: ft/s, m/s, in/min, m/h, ft/min, in/sec

Output Process Variables

Level

Percentage Level

Distance to Level

Level Rate

Volume

Vapor (Ullage) Thickness

Vapor (Ullage) Thickness %

Vapor (Ullage) Volume

Distance to Interface

Interface Level

Interface Level Rate

Upper Layer Thickness

% Interface Level

Lower Volume

Upper Volume

Language

English, German, Italian, French, Spanish, Russian and Turkish

Electrical Connections

SLG 700 series: -inch NPT(female), M20 (female)

Wiring

Accepts up to 16 AWG (1.5 mm diameter).

Mounting

Available with compact housing or remote mount housing option (future).

Dimensions

See page 14 for dimensional drawings.

Net Weight

SLG 700 series: 3.2 kilograms (7 lbs) for aluminum housing

SLG 700 SmartLine Level Transmitter

Operating Conditions All Models

Parameter

Rated Condition

Operative Limits

-40 to 85

-40 to 185

-40 to 85

-40 to 185

-55 to 120

-67 to 248

SLG 720

-40 to 200

-40 to 392

-40 to 200

-40 to 392

-55 to 125

-67 to 257

SLG 726

-60 to 450

-76 to 842

-60 to 450

-76 to 842

-55 to 125

-67 to 257

Ambient Temperature1

Transportation and
Storage

Process Connector2

Humidity

%RH

0 to 100

0 to 100

Maximum Allowable Working

Pressure
(MAWP) 3, 4

SLG720: 40 bar (580 psi)

Supply Voltage, Current, and

Load Resistance

Voltage at HART terminal is 14.0 to 42.0 Vdc (IS versions limited to 30 Vdc)

0 to 100

SLG726: 400 bar (5800 psi)

0 to 1300 ohms (as shown in Figure 3

(HART)

-)

1 LCD Display operating temperature -20C to +70C . Storage temperature -30C to 80C.
2 rated Condition and Operative Limit temperatures subject to O-Ring selection and ambient temperature conditions. See Error! Reference source not found.

or details.
3 Units can withstand overpressure of 1.5 x MAWP without damage
4 Consult factory for MAWP of SLG 700 transmitter with CRN approval

Figure 3 - Supply voltage and Loop resistance chart & calculations

(not applicable for Fieldbus)

SLG 700 SmartLine Level Transmitter

Performance Under Rated Conditions All Models

Parameter
Description
Measuring principle

Time Domain Reflectometry (TDR)

Analog Output
Digital Communications:

Two-wire, 4 to 20 mA (HART transmitters only)

HART 7 protocol or FOUNDATION Fieldbus ITK 6.0.1 compliant
All transmitters, irrespective of protocol have polarity insensitive connection.

Output Failure Modes

Honeywell Standard:
3.8 20.8 mA
3.6 mA and 21.0 mA

Normal Limits:
Failure Mode:
Span

0.4 m (15.75 inches) to 50 m (164 feet)

Resolution

1 mm (0.04 inch)

Accuracy
Reference conditions are
given in the table below

NAMUR NE 43 Compliance:
3.8 20.5 mA
3.6 mA and 21.0 mA

Rod 0.03% of level or 3mm (whichever is greater)

Wire 0.03% of level or 3mm (whichever is greater)
Coax 0.03% of level or 3mm (whichever is greater)

Ambient temperature Effect

0.2mm/degree K or 30 ppm/Deg K of measured value whichever is greater

Repeatability

1 mm (0.04 inch)

Dielectric constant (minimum)

1.4

Damping Time Constant

HART: Adjustable from 0 to 60 seconds in 0.1 increments.

Default Value: 2 seconds

Electromagnetic Compatibility

IEC61326 (All transmitters), NAMUR NE21 (HART & 4-20mA)

Lightning Protection Option

Leakage Current: 10 uA max @ 42.0 VDC 93C

Impulse rating:
8/20 uS
5000 A (>10 strikes)
10/1000 uS
200 A (> 300 strikes)

Reference Conditions
Parameter
Ambient Temperature
Process Temperature
Humidity
Flange diameter for rod, wire configurations
Reference product in the
Single
tank
Two (non-flooded)
Minimum distance to walls and obstacles
Process pressure

Unit
C
C

% RH
mm
NA
NA
mm
kPa

10000 A (1 strike min.)

Reference Condition
25 1
25 1
0 - 85
>300
Air / Water
Air / Oil (DC=2) / Water
400
100 10

Sensor Details All Models

Parameter
Description

Probe

Type

Min/ Max length

Materials

Rod

0.4m (1.3 ft) / 6.3m (20.7 ft)

SS 316L, C-276

Wire

1.0m (3.3 ft) / 50m (164 ft)

SS 316

Coax

0.4m (1.3 ft) / 6.3m (20.7 ft)

SS 316L, C-276

SLG 700 SmartLine Level Transmitter

Maximum measurement range versus Dielectric Constant

Probe
Wire
Rod
Coax
Min DC

Range (m)

1.4

15

1.8

25

42

46

50

Centering Disk
Parameter

Min DC

Range (m)

Min DC

Range (m)

1.4

6.3

1.4

6.3

Description
Type

Centering Disk

Rod and Wire

Min/ Max diameter

Materials

5.08 cm (2 in) / 20.32 cm (8 in)

SS 316L, C-276

Figure 4 - Transmitter O-Ring Seal Material Temperature Applicability SLG720

SLG 700 SmartLine Level Transmitter

Figure 5 - SLG 726 Temperature Limits

Figure 6 - SLG 726 Maximum Pressure based on Maximum Temperature

SLG 700 SmartLine Level Transmitter

PROCESS TEMPERATURE [oC]

MAX PRESSURE
[bar]

AMBIENT TEMPERATURE [oC]

-40

-30

-20

-10

10

20

30

40

50

60

70

80

85

-60

400

400

400

400

400

400

400

400

375

375

350

350

325

325

-50

400

400

400

400

400

400

400

400

375

375

350

350

325

325

400

400

400

400

400

400

400

375

375

350

350

325

325

300

50

400

400

400

400

400

400

400

375

375

350

350

325

300

300

100

400

400

400

400

400

400

375

375

350

350

325

325

300

150

400

400

400

400

400

400

375

375

350

350

325

325

300

200

400

400

400

400

400

375

375

350

350

325

325

300

250

400

400

400

400

400

375

375

350

350

325

325

300

300

400

400

400

400

375

375

350

350

325

325

300

300

350

400

400

400

400

375

375

350

350

325

325

300

400

400

400

400

375

375

350

350

325

325

300

300

450

400

400

400

375

375

350

350

325

325

300

300

INTRINSICALLY SAFE (IS)

NON-(IS)

Figure 7 - SLG 726 Maximum pressure based on maximum operating temperature in tabular form

10

SLG 700 SmartLine Level Transmitter

Communications Protocols & Diagnostics

HART Protocol
Version: HART 7

Schedule Entries
45 maximum schedule entries

Power Supply

50 maximum Links

Voltage: 14.0 to 42.0 Vdc at terminals

Number of VCRs: 50 max

Load: Maximum 1300 ohms. See Operating Conditions

Compliance Testing: Tested according to ITK 6.1.2

All Models table.

Minimum Load: 0 ohms. (For handheld communications a
minimum load of 250 ohms is required)

Software Download
Utilizes Class-3 of the Common Software Download
procedure as per FF-883 which allows the field devices of

FOUNDATION Fieldbus (FF)

any manufacturer to receive software upgrades from any

Power Supply Requirements

host.

Voltage: 9.0 to 32.0 Vdc at terminals

Standard Diagnostics

Steady State Current: 19.6 mAdc

SLG 700 series top level diagnostics are reported as

Software Download Current: 29.4 mAdc

Block Type

either critical or non-critical and readable via DD or DTM

Qty

Execution Time

Resource

1P

NA/a

Level Transducer

1P

NA

Level Auxillary Transducer

1P

NA

Diagnostic

1P

NA

LCD Display

1P

NA

Analog Input

1P 5I

30 ms

PID w/Autotune

1P 1I

45 ms

Arithmetic

1P 1I

30 ms

Input Selector

1P 1I

30 ms

tools or integral display.

Other Certification Options

See Approval Certifications Table for details on page 11.
Materials
o

NACE MRO175, MRO103, ISO15156

For Hazardous Location certifications to:

CSA (Canada and USA), ATEX, IECEx, SAEx, FM,
NEPSI and CCoE.

FM for Explosion Proof and Intrinsic Safety

Canadian Standards (CSA) Explosion Proof and

Intrinsic Safety

P = Permanent Block
I = Instantiable Block

Cenelec ATEX Explosion Proof and Intrinsic

Safety

All available function blocks adhere to FOUNDATION

IECEx Explosion Proof and Intrinsic Safety

Fieldbus standards. PID blocks support ideal & robust

PID algorithms with full implementation of Auto-tuning.

Steam Boiler Certification (future)

Link Active Scheduler

Pressure Equipment Directive (PED)

Scheduler and take over when the host is disconnected.

CE Mark

Acting as a LAS, the device ensures scheduled data

Overfill protection (WHG)

CRN Registration (see table below for specifics)

SIL 2/3 Level Compliance

Positive Material Identification (PMI)

Transmitters can perform as a backup Link Active

transfers typically used for the regular, cyclic transfer of

control loop data between devices on the Fieldbus.
Number of Devices/Segment
Entity IS model: 6 devices / segment

SLG 700 SmartLine Level Transmitter

11

Approval Certifications:
AGENCY

TYPE OF PROTECTION

Explosion Proof with intrinsically safe

output:
Class I, Division 1, Groups A, B, C, D;
Class I, Zone 0/1 AEx d[ia] IIC T4 Ga/Gb
Ex d[ia] IIC T4 Ga/Gb

CSA
cCSAus
(Canada and
USA)

COMM.
OPTION

All

FIELD
PARAMETERS

AMBIENT TEMP
(Ta)

Note 1

-50 C to 85 C

4-20 mA / HART

Note 2a

-50 C to 70 C

FOUNDATION
Fieldbus / FISCO

Note 2b/2c

4-20 mA / HART

Note 1

-50 C to 85 C

FOUNDATION
Fieldbus / FISCO

Note 1

-50 C to 85 C

Dust Ignition Proof:

Class II, Division 1, Groups E, F, G; T4
Class II Zone 21 AEx tb IIIC T95 oC
DIP A21/II, III /1/EFG/Ex tb IIIC T95 oC
Intrinsically Safe:
Class I, II, III, Division 1, Groups A, B, C,
D, E, F, G; T4
Class 1 Zone 0 AEx ia IIC T4 Ga
Ex ia IIC T4 Ga
Nonincendive with intrinsically safe
output:
Class I, Division 2, Groups A, B, C, D; T4
Class I, Zone 0/2 AEx nA[ia] IIC T4 Ga/Gc
Ex nA[ia] IIC T4 Ga/Gc
Enclosure: Type 4X/ IP66/ IP67

Canadian Registration Number (CRN):

All

All

-50 C to 70 C

All SLG 700 models are registered in all provinces and territories
in Canada.

Explosion proof with intrinsically safe

probe:
XP-IS Class I, Division 1, Groups A, B, C, D,
T4 with Intrinsically safe probe
Class 1, Zone 0/1 AEx ia/d IIC Ga/Gb T4
Dust Ignition Proof with intrinsically safe
probe:
DIP-IS Class II, Division 1, Groups E, F, G,
T4 with Intrinsically Safe Probe
FM
ApprovalsTM

All

Note 1

-50 C to 85 C

Zone 21 AEx tb IIIC Db T95 oC

Probe : Zone 20 AEx ia IIIC Da T95 oC
Intrinsically Safe:
IS Class I, II, III, Division 1, Groups A, B, C,
D, E, F, G, T4
Class l, Zone 0, AEx ia IIC T4 Ga
Nonincendive with intrinsically safe
probe:
NI-IS Class I, II, III, Division 2, Groups A, B,
C, D, F, G, T4 with Intrinsically Safe Probe
Class l, Zone 2, AEx nA IIC T4
Enclosure: Type 4X/ IP66/ IP67

4-20 mA / HART

Note 2

-50 C to 70 C

FOUNDATION
Fieldbus / FISCO

Note 2

4-20 mA / HART

Note 1

-50 C to 85 C

FOUNDATION
Fieldbus / FISCO

Note 1

-50 C to 85 C

All

All

-50 C to 70 C

12

SLG 700 SmartLine Level Transmitter

Approval Certifications: (Continued)

Flameproof with IS output:

2[1] G Ex d[ia] IIC T4 Gb[Ga]
Dust Ignition Proof :
II 2 D Ex tb IIIC T 95oC IP 66
ATEX

Note 1

-50 C to 85 C

4-20 mA / HART

Note 2a

-50 C to 70 C

FOUNDATION
Fieldbus / FISCO

Note 2b/2c

4-20 mA / HART

Note 1

-50 C to 85 C

FOUNDATION
Fieldbus / FISCO

Note 1

-50 C to 85 C

Enclosure: IP66/ IP67

All

All

Flameproof with IS output:

Ex d[ia] IIC T4 Gb[Ga]
Dust Ignition Proof :
Ex tb IIIC T 95oC IP 66

All

Intrinsically Safe:
II 1 G Ex ia IIC T4 Ga
Nonincendive with IS output:
3[1] G Ex nA[ia] IIC t4 Gb[Ga]

IECEx
(World)

SAEx
(South Africa)
KOSHA
(Korea)

-50 C to 85 C

4-20 mA / HART

Note 2a

-50 C to 70 C

FOUNDATION
Fieldbus / FISCO

Note 2b/2c

-50 C to 70 C

4-20 mA / HART

Note 1

-50 C to 85 C

FOUNDATION
Fieldbus / FISCO

Note 1

-50 C to 85 C

Enclosure: IP66/ IP67

All

All

Flameproof with IS output:

Ex d[ia] IIC T4 Gb[Ga]
Dust Ignition Proof :
Ex tb IIIC T 95oC

All

Intrinsically Safe:
Ex ia IIC T4 Ga

Intrinsically Safe:
Ex ia IIC T4 Ga
Nonincendive with IS output:
Ex nA[ia] IIC T4 Gc[Ga]
Enclosure: IP66/ IP67

(Future
Certifications)
INMETRO

-50 C to 70 C

Note 1

Nonincendive with IS output:

Ex nA[ia] IIC T4 Gc[Ga]

CCoE
(India)

All

Note 1

-50 C to 85 C

4-20 mA / HART

Note 2a

-50 C to 70 C

FOUNDATION
Fieldbus

Note 2b

-50 C to 70 C

4-20 mA / HART

Note 1

-50 C to 85 C

FOUNDATION
Fieldbus

Note 1

-50 C to 85 C

All

All

Flameproof with IS output:

Ex d[ia] IIC T4 Gb[Ga]
All

(Brazil)

Dust Ignition Proof :

Ex tb IIIC T 95oC IP 66

GOST
(Russia)

Intrinsically Safe:
Ex ia IIC T4 Ga
Nonincendive with IS output:
Ex nA[ia] IIC T4 Gc[Ga]
Enclosure : IP 66/67

Note 1

-50 C to 85 C

4-20 mA / HART

Note 2a

-50 C to 70 C

FOUNDATION
Fieldbus

Note 2b

-50 C to 70 C

4-20 mA / HART

Note 1

-50 C to 85 C

FOUNDATION
Fieldbus

Note 1

All

All

-50 C to 85 C
-

SLG 700 SmartLine Level Transmitter

13

Flameproof with IS output:

Ex d[ia] IIC T4 Ga/Gb
Dust Ignition Proof :
Ex tb IIIC T 95oC IP 66
NEPSI
(China)

Intrinsically Safe:
Ex ia IIC T4 Ga
Nonincendive with IS output:
Ex nA[ia] IIC T4 Ga/Gc
Enclosure : IP 66/67

Notes:
1.

2.

All

Note 1

-50 C to 85 C

4-20 mA / HART

Note 2a

-50 C to 70 C

FOUNDATION
Fieldbus

Note 2b

-50 C to 70 C

4-20 mA / HART

Note 1

-50 C to 85 C

FOUNDATION
Fieldbus

Note 1

-50 C to 85 C

All

All

Operating Parameters:
Voltage= 14.0 to 42.0 V DC (HART)
Current= 4-20 mA Normal (3.5 23 mA Faults) (HART)
= 9 to 32 V (FF)
= 29.4 mA Max (FF)
Intrinsically Safe Entity Parameters
a. Analog/ HART Entity Values:
Vmax= Ui = 30 V
Imax= Ii= 225 mA
Ci = 4 nF
Li = 0
Pi =0.9 W
b. Foundation Fieldbus- Entity Values
Vmax= Ui = 30 V
Imax= Ii= 225 mA
Ci = 0 nF
Li = 0
Pi =1.0 W
c. Foundation Fieldbus (FISCO)- Entity Values
Vmax= Ui = 17.5 V
Imax= Ii= 380 mA
Ci = 0 nF
Li = 0
Pi =5.32 W
When Installed as FISCO Ta= -50C to 45C

Overfill Protection

SIL 2/3 Certification

WHG
Certificate #: Z-65.16-556. TV-tested and approved for overfill protection according to the German WHG
regulations
IEC 61508 SIL 2 for non-redundant use and SIL 3 for redundant use according to EXIDA and TV Nord Sys
Tec GmbH & Co. KG under the following standards: IEC61508-1: 2010; IEC 61508-2: 2010; IEC61508-3: 2010.
Note: Only transmitters with SIL markings are certified for SIL applications. Transmitters ordered with SIL
certification will signify the SIL Level on the SLG700 Nameplate.

14

SLG 700 SmartLine Level Transmitter

Mounting & Dimensional Drawings

Reference Dimensions:

millimeters
inches

Figure 8 - SLG720 SmartLine Level with NPT fitting

SLG 700 SmartLine Level Transmitter

Figure 9 -SLG720 SmartLine Level with BSP (British Standard Pipe) fitting

15

16

SLG 700 SmartLine Level Transmitter

Figure 10 - SLG720 SmartLine Level with Flange

SLG 700 SmartLine Level Transmitter

Figure 11 - SmartLine Level with remote housing option (Shown with SLG720)

Figure 12 -SLG720 SmartLine Level rod probes

17

18

SLG 700 SmartLine Level Transmitter

Figure 13 - SLG720 SmartLine Level coaxial probes

SLG 700 SmartLine Level Transmitter

Figure 14 - SLG726 Threaded NPT Mount Transmitter

19

20

SLG 700 SmartLine Level Transmitter

Figure 15 - SLG726 Flange Mount Transmitter

SLG 700 SmartLine Level Transmitter

Figure 16 - SLG726 Threaded BSP/G Mount Transmitter

21

22

SLG 700 SmartLine Level Transmitter

Figure 17 - SLG726 Probes

SLG 700 SmartLine Level Transmitter

23

Model Selection Guides are subject to change and are inserted into the specifications as guidance only.
Prior to specifying or ordering a model please check for the latest revision of the Model Selection Guides which are
published at: www.honeywellprocess.com/en-US/pages/default.aspx

Model Selection Guide

Model SLG72X Series Liquid Measurement
Guided Wave Radar Level Transmitter
Model Selection Guide
34-SL-16-01 Issue 4A
Instructions

Select the desired Key Number. The arrow to the right marks the selection available.

Make one selection from each Table (I, II and IX) using the column below the proper arrow.

A () denotes unrestricted availability. A letter denotes restricted availability.

Restrictions follow Table IX.

I

Key Num ber

SLG72 _

II

_____________

III

____

VI

VII

_____

- _ -

___

IV

___

VIII (Optional)

__,__

Application

KEY NUMBER

Selection

SLG720

High Temperature/High Pressure Liquid Level Measurement (-60 to 450C/-1 to 400 bar)

SLG726

Availability

Probe and Material Selections

Probe Material

Measurement

Probe Type & Dia.

Min/Max Length
Meters (Feet)

None - Customer Supplied (Single

Rod and Wire Only)

316/316L

General Liquids

a. Wetted materials
and probe type

Alloy C-276

000_________ _

SRA _ _ _ _ _ _ _ _ _ _

0.4m (1.3 ft) / 6.3m (20.7 ft)

SRB _ _ _ _ _ _ _ _ _ _

0.4m (1.3 ft) / 6.3m (20.7 ft)

SRC _ _ _ _ _ _ _ _ _ _

0.4m (1.3 ft) / 6.3m (20.7 ft)

SRH _ _ _ _ _ _ _ _ _ _

0.4m (1.3 ft) / 6.3m (20.7 ft)

SRJ _ _ _ _ _ _ _ _ _ _

0.4m (1.3 ft) / 6.3m (20.7 ft)

SRM _ _ _ _ _ _ _ _ _ _

0.4m (1.3 ft) / 6.3m (20.7 ft)

SRN _ _ _ _ _ _ _ _ _ _

0.4m (1.3 ft) / 6.3m (20.7 ft)

SRK _ _ _ _ _ _ _ _ _ _

0.4m (1.3 ft) / 6.3m (20.7 ft)

SRL _ _ _ _ _ _ _ _ _ _

Wire, Single 4 mm dia

1.0m (3.3 ft) / 50m (164 ft)

SWA _ _ _ _ _ _ _ _ _ _

Wire, Single 4 mm dia, max 300 mm

nozzle height center rod

1.3m (4.3 ft) / 50m (164 ft)

SWB _ _ _ _ _ _ _ _ _ _

Coaxial (22 mm OD), segmented,

2000 mm segments

0.4m (1.3 ft) / 6.3m (20.7 ft)

SCA _ _ _ _ _ _ _ _ _ _

0.4m (1.3 ft) / 6.3m (20.7 ft)

SCB _ _ _ _ _ _ _ _ _ _

0.4m (1.3 ft) / 6.3m (20.7 ft)

ARA _ _ _ _ _ _ _ _ _ _

0.4m (1.3 ft) / 6.3m (20.7 ft)

ARD _ _ _ _ _ _ _ _ _ _

0.4m (1.3 ft) / 6.3m (20.7 ft)

ARE _ _ _ _ _ _ _ _ _ _

0.4m (1.3 ft) / 6.3m (20.7 ft)

ACA _ _ _ _ _ _ _ _ _ _

Probe and Material Selections

End Type

316/316L
c. Centering Disk

Alloy C-276

2" Centering
3" Centering
4" Centering
6" Centering
8" Centering
2" Centering
3" Centering
4" Centering
6" Centering
8" Centering

None
Weight
None
Disk (see
Disk (see
Disk (see
Disk (see
Disk (see
Disk (see
Disk (see
Disk (see
Disk (see
Disk (see

Note
Note
Note
Note
Note
Note
Note
Note
Note
Note

2
2
2
2
2
2
2
2
2
2

below)
below)
below)
below)
below)
below)
below)
below)
below)
below)

Viton or Fluorocarbon Elastomer (-26 to 200C)

Kalrez perfluorelastomer (-20 to 200C; saturated steam max 150C)
EPDM (-40 to 150C)
Buna-N (-40 to 120C)
Metallic - Alloy 718 NACE
Metallic - 17-4 PH

d. Seal material

Liquids

Coaxial (22 mm OD), 2000 mm

segments

TABLE I (con't)

Selection

0.4m (1.3 ft) / 6.3m (20.7 ft)

Rod, Single 8 mm dia., segmented,

2000 mm segments
Rod, Single 12 mm dia., segmented,
2000 mm segments
Rod, Single 16 mm dia., segmented,
2000 mm segments
Rod, segmented, 8 mm dia, 500 mm
segments
Rod, segmented, 8 mm dia, 1000
mm segments
Rod, segmented, 12 mm dia, 500
mm segments
Rod, segmented, 12 mm dia, 1000
mm segments
Rod, segmented, 16 mm dia, 500
mm segments
Rod segmented, 16 mm dia, 1000
mm segments

Coaxial (42 mm OD), segmented,

2000 mm segments (see Note 3
below)
Rod, Single 8 mm dia., segmented,
2000 mm segments
Rod, segmented, 8 mm dia., 500 mm
segments
Rod, segmented, 8 mm dia., 1000
mm segments

e. Probe length units Metric (millimeters)

f. Probe length

_____

Standard T/P Liquid Level Measurement (-40 to 200C/-1 to 40 bar)

TABLE I

b. Probe End
Treatment

IX

400 mm to 50000 mm (in 100 mm increments) (Probe length 00000 available only with table 1A selection 000.)

Selection

20

26

___N_________
___W_________
____00_______
____S2_______
____S3_______
____S4_______
____S6_______
____S8_______
_ _ _ _ A2 _ _ _ _ _ _ _
_ _ _ _ A3 _ _ _ _ _ _ _
_ _ _ _ A4 _ _ _ _ _ _ _
_ _ _ _ A6 _ _ _ _ _ _ _
_ _ _ _ A8 _ _ _ _ _ _ _
_ _ _ _ _ _ V_ _ _ _ _ _
______K______
______E______
______B______
_ _ _ _ _ _ M_ _ _ _ _ _
______N______

u
p

q
q
q
q
q
y
y
y
y
y

u
p

q
q
q
q
q

_ _ _ _ _ _ _ M_ _ _ _ _

_ _ _ _ _ _ _ _ XXXXX

Note: All flanges are 316L; when coated or C-276 wetted materials are selected a wetted material barrier is provided.

Note 2: A drilling jig needs to be ordered when ordering centering disk for rod probes. See accessory part numbers for drilling jig part.
Note 3: For transmitters with threaded process connections and probe lengths over 2000mm, probe will need to be assembled from within the tank.

24

SLG 700 SmartLine Level Transmitter

TABLE II

Connection Types

Material

Size
1-1/2"

2"

3"

316/316L
Flanges
ANSI B16.5 (CRN)

4"

6"
8"
1-1/2"

C-276

2"
3"
DN40

DN50

316/316L

DN80

Flanges
DIN EN 1092
DN100

DN150
DN200
DN40
DN50

C-276

DN80
DN100

Flanges
Special

316/316L

316/316L
Threaded
Fittings
ISO228 and ANS
C-276

Fisher 249B/259B
Fisher 249C
Masoneilan 7-1/2"

Rating

Selection

20

Class 150lb RF
Class 300lb RF
Class 150lb RF
Class 300lb RF
Class 600lb RF
Class 900lb RF
Class 1500lb RF
Class 600lb RTJ
Class 900lb RTJ
Class 1500lb RTJ
Class 150lb RF
Class 300lb RF
Class 600lb RF
Class 900lb RF
Class 1500lb RF
Class 600lb RTJ
Class 900lb RTJ
Class 1500lb RTJ
Class 150lb RF
Class 300lb RF
Class 600lb RF
Class 900lb RF
Class 1500lb RF
Class 600lb RTJ
Class 900lb RTJ
Class 1500lb RTJ
Class 150lb RF
Class 150lb RF
Class 150lb RF
Class 300lb RF
Class 150lb RF
Class 300lb RF
Class 150lb RF
Class 300lb RF
DN40 PN10-40
DN50 PN10/16
DN50 PN25/40
DN50 PN63
DN50 PN100
DN50 PN160
DN50 PN250
DN80 PN10/16
DN80 PN25/40
DN80 PN63
DN80 PN100
DN80 PN160
DN80 PN250
DN100 PN10/16
DN100 PN25/40
DN100 PN63
DN100 PN100
DN100 PN160
DN100 PN250
DN150 PN10/16
DN200 PN16
DN40 PN10/40
DN50 PN10/16
DN50 PN25/40
DN80 PN10/16
DN80 PN25/40
DN100 PN10/16
DN100 PN25/40
600lb
600lb
600 psi
3/4" NPT (CRN)
1" NPT (CRN)
1 - 1/2" NPT (CRN)
2" NPT (CRN)
3/4" BSP (G 3/4")
1" BSP (G 1")
1-1/2" BSP/G 1-1/2
3/4" NPT (CRN)
1" NPT (CRN)
1 - 1/2" NPT (CRN)
2" NPT (CRN)
3/4" BSP (G 3/4")
1" BSP (G 1")
1-1/2" BSP/G 1-1/2

AS1A
AS1B
AS2A
AS2B
AS2C
AS2D
AS2H
AS2J
AS2K
AS2L
AS3A
AS3B
AS3C
AS3D
AS3H
AS3J
AS3K
AS3L
AS4A
AS4B
AS4C
AS4D
AS4H
AS4J
AS4K
AS4L
AS6A
AS8A
AC1A
AC1B
AC2A
AC2B
AC3A
AC3B
DS4A
DS5A
DS5B
DS5H
DS5J
DS5K
DS5L
DS8A
DS8B
DS8H
DS8J
DS8K
DS8L
DS1A
DS1B
DS1H
DS1J
DS1K
DS1L
DS1Y
DS2A
DC4C
DC5A
DC5B
DC8A
DC8B
DC1A
DC1B
FS1C
FS1D
MS1C
NS7A
NS1A
NS5A
NS2A
GS7A
GS1A
GS5A
NC7A
NC1A
NC5A
NC2A
GC7A
GC1A
GC5A

26

SLG 700 SmartLine Level Transmitter

Agency Approvals (see data sheet for Approval Code Details)

TABLE III

Approvals

25

26

A_ _
B__
C__
D__
E__
F__
G__
H__
J__
K__
L__

M_ _

_H_
_F_

__0
__A
__D
__E

Selection

20

26

1____

None - Standard Level

Interface Measurement

_0___
_1___

Flooded Interface Measurement

_2___

__0__

_ _ _1 _
_ __ 2_
_ __ 3_
_ __ 4_
_ _ _5_
_ _ _6_

f
f
f
f

f
f
f
f

g
g

g
g

____ S
____ C

A
B

Selection
0__
1__
2__
_ A0
_ A2
_ A6
_ A7
_ A8
_ A9

n
n
m
n
m

n
n
m
n
m

01
02
03
04

Selection
_____
00000

TABLE IV

TRANSMITTER ELECTRONICS SELECTIONS

Material

Connection

Lightning Protection

Polyester Pow der Coated Aluminum

1/2 NPT
M20
1/2 NPT
M20
1/2 NPT
M20
1/2 NPT
M20
1/2 NPT
M20
1/2 NPT
M20

None
None
Yes
Yes
None
None
Yes
Yes
None
None
Yes
Yes

Polyester Pow der Coated Aluminum

Polyester Pow der Coated Aluminum
Polyester Pow der Coated Aluminum
316 Stainless Steel (Grade CF8M)

a. Electronic Housing
Material &
Connection Type

316 Stainless Steel (Grade CF8M)

316 Stainless Steel (Grade CF8M)
316 Stainless Steel (Grade CF8M)
Remote 3m - Polyester Pow der Coated Aluminum
Remote 3m - Polyester Pow der Coated Aluminum
Remote 3m - Polyester Pow der Coated Aluminum
Remote 3m - Polyester Pow der Coated Aluminum
Analog Output

Digital Protocol

4-20mA dc
n/a

HART Protocol
Foundation Fieldbus

b. Output/ Protocol

c. Customer
Interface Selections

Indicator

Ext Zero, Span & Config Buttons

Languages

None
None
Advanced
Advanced

None
Yes (Zero/Span Only)
None
Yes

None
None
EN, DE, IT, FR, SP, RU, TU
EN, DE, IT, FR, SP, RU, TU

TABLE V

CONFIGURATION SELECTIONS
Diagnostics

a. Diagnostics

Selection
0
A
B
C
D
E
F
G
H
K
L

20

No Explosion Protection Approvals Required

FM Explosion/Flame proof, Intrinsically Safe, Non-Incendive/Sparking, & Dust Ignition Proof
CSA (Canada & USA) Explosion/Flame proof, Intrinsically Safe, Non-Incendive/Sparking, & Dust Ignition Proof
ATEX Flameproof, Intrinsically Safe, Non-Sparking, & Dust Ignition Proof
IECEx Flameproof, Intrinsically Safe, Non-Sparking, & Dust Ignition Proof
SAEx Flameproof, Intrinsically Safe, Non-Sparking, & Dust Ignition Proof
INMETRO Flameproof, Intrinsically Safe, Non-Sparking, & Dust Ignition Proof
NEPSI Flameproof, Intrinsically Safe, Non-Sparking, & Dust Ignition Proof
CCoE Flameproof, Intrinsically Safe, Non-Sparking, & Dust Ignition Proof
KOSHA Flameproof, Intrinsically Safe, Non-Sparking, & Dust Ignition Proof
EAC TR-CU Flameproof, Intrinsically Safe, Non-Sparking, & Dust Ignition Proof

Standard Diagnostics

Selection

Interface Options

b. Interface
Measurement

c. Compensations

None
Write Protect

e. General
Configuration
3

High>
Low<
High>
Low<

Disabled
Disabled
Enabled
Enabled
Enabled
Disabled

d. Output Limit,
Failsafe & Write
Protect Settings

High & Low Output Lim its

Fail Mode

21.0mAdc
3.6mAdc
21.0mAdc
3.6mAdc

Honeywell
Honeywell
Honeywell
Honeywell

N/A
N/A

Std
Std
Std
Std

(3.8 - 20.8 mAdc)

(3.8 - 20.8 mAdc)
(3.8 - 20.8 mAdc)
(3.8 - 20.8 mAdc)

N/A Fieldbus or Profibus

N/A Fieldbus or Profibus

Factory Standard
Custom Configuration (Unit Data Required from customer)

NAMUR Output Limits 3.8 - 20.5mAdc can be configured by the customer.

TABLE VI
Accuracy and
Calibration

TABLE VII
a. Customer
Tag

b. Unassembled
Conduit
Plugs &
Adapters

TABLE VIII

CALIBRATION & ACCURACY SELECTIONS

Accuracy

Std Accuracy (+/-3mm or +/-0.03%)

Std Accuracy (+/-3mm or +/-0.03%)

Calibrated Range

ACCESSORY SELECTIONS
No customer tag
One Wired Stainless Steel Tag (Up to 4 lines 26 char/line)
Two Wired Stainless Steel Tag (Up to 4 lines 26 char/line)
No Conduit Plugs or Adapters Required
1/2 NPT Male to 3/4 NPT Female 316 SS Certified Conduit Adapter
1/2 NPT 316 SS Certified Conduit Plug
M20 316 SS Certified Conduit Plug

Minifast 4 pin (1/2 NPT)

Minifast 4 pin (M20)
OTHER Certifications & Options: (String in sequence com m a delim ited (XX, XX, XX,.)
None

Certifications &
Warranty

NACE MR0175; MR0103; ISO15156 Process wetted, pressure retaining parts only
EN10204 Type 3.1 Material Traceability; pressure retaining parts
Certificate of Conformance
Calibration Test Report & Certificate of Conformance
Certificate of Origin
FMEDA (SIL 2/3) Certification
WHG Overfill Protection
PMI Certification
Extended Warranty Additional 1 year
Extended Warranty Additional 2 years
Extended Warranty Additional 3 years
Extended Warranty Additional 4 years

TABLE IX

Factory

Calibration Qty

Factory Std (uses RF cable calibrator)

Single Range
Custom calibration w/ certificate (Unit Data Single Range

Manufacturing Specials
Application and Validation Tool (AVT) Configuration File Reference #
Factory Default Configuration, No AVT File

Selection

Selection
00
FG
FX
F3
F1
F5
FE
WG
PM

26

SLG 700 SmartLine Level Transmitter

MODEL RESTRICTIONS
Restriction Letter

Available Only with

Table

Selection(s)

If

probe length 400 mm to 6300 mm (_

_ _ _ _ _ _ _ _ _ 400 to _ _ _ _ _ _ _ _
_ 6300)

II

If

f
g

probe length 400 mm to 6300 mm (_

_ _ _ _ _ _ _ _ _ 400 to _ _ _ _ _ _ _ _
_ 6300)

_S__

If

probe length 400 mm to 6300 mm (_

_ _ _ _ _ _ _ _ _ 400 to _ _ _ _ _ _ _ _
_ 6300)

If

probe length 1000 mm to 50000 mm

(_ _ _ _ _ _ _ _ _ 1000 to _ _ _ _ _ _ _
_ 50000)

II

_ S_ _

IVb

_F_

If

probe length 400 mm to 6300 mm (_

_ _ _ _ _ _ _ _ _ 400 to _ _ _ _ _ _ _ _
_ 6300)

II

_S__

If

probe length 400 mm to 6300 mm (_

_ _ _ _ _ _ _ _ _ 400 to _ _ _ _ _ _ _ _
_ 6300)

II

j
k

II

NS7A, NS1A, GS7A, GS1A

IVb

_F_

II

NS7A, GS7A

If

probe length > 2000 mm

II

NC7A, GC7A

If

probe length > 2000 mm

Vd

_ _ _1 _, _ _ _2 _, _ _ _6 _

II

NS7A, NS1A, NS2A, GS1A, GS7A

II

NS7A, NS1A, GS7A, GS1A

_C__

IVb

_H_

If

probe length 400 mm to 6300 mm (_

_ _ _ _ _ _ _ _ _ 400 to _ _ _ _ _ _ _ _
_ 6300)

If

probe length 400 mm to 6300 mm (_

_ _ _ _ _ _ _ _ _ 400 to _ _ _ _ _ _ _ _
_ 6300)

m
n

II
IVa
IVa

_C__
B_ _, D_ _, F_ _, H_ _, K _ _, M _ _
A_ _, C_ _, E_ _, G_ _, J _ , L _ _

Ia

Not Available with

Selection(s)

_S__
Select only one option from this group

II
d

Table

SWA_ _ _ _ _ _ _ _ _ _,
SWB_ _ _ _ _ _ _ _ _ _,

1a,1b

SWAW _ _ _ _ _ _ _ _ _,
SWBW _ _ _ _ _ _ _ _ _,
SRA_ _ _ _ _ _ _ _ _ _,
SRB_ _ _ _ _ _ _ _ _ _,
SRH_ _ _ _ _ _ _ _ _ _,
SRJ_ _ _ _ _ _ _ _ _ _,
SRM_ _ _ _ _ _ _ _ _ _,
SRN_ _ _ _ _ _ _ _ _ _,
SRK_ _ _ _ _ _ _ _ _ _,
SRL_ _ _ _ _ _ _ _ _ _,
SRC_ _ _ _ _ _ _ _ _ _

If

probe length 1000 mm to 50000 mm

(_ _ _ _ _ _ _ _ _ 1000 to _ _ _ _ _ _ _
_ 50000)

II

_ S_ _

Ia

SWA_ _ _ _ _ _ _ _ _ _,
SWB_ _ _ _ _ _ _ _ _ _

If

probe lengths more than 20

meters
(>_ _ _ _ _ _ _ _ 20000)

SWA_ _ _ _ _ _ _ _ _ _,
SWB_ _ _ _ _ _ _ _ _ _,

u
Ia

If

probe length 1300 mm to 50000 mm

(_ _ _ _ _ _ _ _ _ 1300 to _ _ _ _ _ _ _
_ 50000)

II

_ S_ _

1a

ARA_ _ _ _ _ _ _ _ _ _,
ARD_ _ _ _ _ _ _ _ _ _,
ARE_ _ _ _ _ _ _ _ _ _

SLG 700 SmartLine Level Transmitter

27

ACCESSORIES
Description

Part Number

SmartLine Anytime Tool (for firmware upgrade)

SmartLine Level Drilling Jig for Rod Probes, reusable

50127238-501
51000000-502

FIELD INSTALLABLE REPLACEMENT PARTS

Description
GWR Level Basic Indicator Kit
GWR Level Advanced Indicator Kit
GWR Level Terminator Module w/Lightning Protection Kit for HART Modules
GWR Level Terminator Module w/Lightning Protection Kit for FF Modules
GWR Level Terminator Module w/o Lightning Protection Kit for HART Modules
GWR Level Terminator Module w/o Lightning Protection Kit for FF Modules
GWR Level HART Electronics module w/o connection for external configuration button
GWR Level HART Electronics module w/connection for external configuration button
GWR Level FF Electronics module w/o connection for external configuration button
GWR Level FF Electronics module w/connection for external configuration button

HART is a registered trademark of HART Communication Foundation.

FOUNDATIONTM Fieldbus is a trademark of Fieldbus Foundation.
Viton is a registered trademark of DuPont Performance Elastomers.
Teflon is a registered trademark of DuPont.
FM ApprovalsSM is a service mark of FM Global

Kit Number
50096657-501
50096657-502
50095191-502
50095191-510
50095191-501
50095191-509
50096656-501
50096656-502
50096656-503
50096656-504

Sales and Service

For application assistance, current specifications, pricing, or name of the nearest Authorized Distributor, contact one
of the offices below.

ASIA PACIFIC

EMEA

AMERICAS

Honeywell Process Solutions,

(TAC) [email protected]

Honeywell Process Solutions,

Phone: + 80012026455 or
+44 (0)1344 656000

Honeywell Process Solutions,

Phone: (TAC) 1-800-423-9883 or
215/641-3610
(Sales) 1-800-343-0228

Australia
Honeywell Limited
Phone: +(61) 7-3846 1255
FAX: +(61) 7-3840 6481
Toll Free 1300-36-39-36
Toll Free Fax:
1300-36-04-70

Email: (Sales)
[email protected]
or
(TAC)
[email protected]

Email: (Sales)
[email protected]
or
(TAC)
[email protected]

China PRC - Shanghai

Honeywell China Inc.
Phone: (86-21) 5257-4568
Fax: (86-21) 6237-2826
Singapore
Honeywell Pte Ltd.
Phone: +(65) 6580 3278
Fax: +(65) 6445-3033
South Korea
Honeywell Korea Co Ltd
Phone: +(822) 799 6114
Fax: +(822) 792 9015

Specifications are subject to change without notice.

For more information

To learn more about SmartLine Transmitters,
visit www.honeywellprocess.com
Or contact your Honeywell Account Manager

Process Solutions
Honeywell
1250 W Sam Houston Pkwy S
Houston, TX 77042
Honeywell Control Systems Ltd
Honeywell House, Skimped Hill Lane
Bracknell, England, RG12 1EB
Shanghai City Centre, 100 Jungi Road
Shanghai, China 20061
www.honeywellprocess.com

34-SL-03-03
August 2016
2016 Honeywell International Inc.