Scribd Logo
Upload

Welcome to Scribd!

  • 34 views

    Enq - Spec - DS, FF & Other Water, Ewage System - Bpcl-Kochi - Part-1 6

    Uploaded by

    Sudhakar Karnan
    This document provides specifications for designing drainage, firefighting, sewage, drinking water, and auxiliary systems for a coke handling system package project in Kerala, India. It requires the bidder to design the systems according to relevant codes and standards, considering total water and air consumption, pipe sizing, pump and compressor sizing, and pressure drops. Piping must allow for maintenance access and clearance for equipment removal. Pipes for water and air services should be run through conveyor galleries where possible and buried elsewhere. The document also specifies material requirements for pipes, valves, flanges, spray nozzles, deluge valves, and detector piping.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Enq - Spec - DS, FF & Other Water, Ewage System - Bpcl-Kochi - Part-1 6

    Uploaded by

    Sudhakar Karnan
    34 views1 page
    This document provides specifications for designing drainage, firefighting, sewage, drinking water, and auxiliary systems for a coke handling system package project in Kerala, India. It requires the bidder to design the systems according to relevant codes and standards, considering total water and air consumption, pipe sizing, pump and compressor sizing, and pressure drops. Piping must allow for maintenance access and clearance for equipment removal. Pipes for water and air services should be run through conveyor galleries where possible and buried elsewhere. The document also specifies material requirements for pipes, valves, flanges, spray nozzles, deluge valves, and detector piping.

    Original Description:

    Informative

    Original Title

    Enq.spec_ds,Ff & Other Water, Ewage System_bpcl-kochi_part-1 6

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for designing drainage, firefighting, sewage, drinking water, and auxiliary systems for a coke handling system package project in Kerala, India. It requires the bidder to design the systems according to relevant codes and standards, considering total water and air consumption, pipe sizing, pump and compressor sizing, and pressure drops. Piping must allow for maintenance access and clearance for equipment removal. Pipes for water and air services should be run through conveyor galleries where possible and buried elsewhere. The document also specifies material requirements for pipes, valves, flanges, spray nozzles, deluge valves, and detector piping.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    34 views1 page

    Enq - Spec - DS, FF & Other Water, Ewage System - Bpcl-Kochi - Part-1 6

    Uploaded by

    Sudhakar Karnan
    This document provides specifications for designing drainage, firefighting, sewage, drinking water, and auxiliary systems for a coke handling system package project in Kerala, India. It requires the bidder to design the systems according to relevant codes and standards, considering total water and air consumption, pipe sizing, pump and compressor sizing, and pressure drops. Piping must allow for maintenance access and clearance for equipment removal. Pipes for water and air services should be run through conveyor galleries where possible and buried elsewhere. The document also specifies material requirements for pipes, valves, flanges, spray nozzles, deluge valves, and detector piping.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    ThyssenKrupp Industries India

    SPECIFICATIONS FOR DS/FF/SEWAGE/DW/AUXILIARY SYSTEMS


    PROJECT: COKE HANDLING SYSTEM PACKAGE
    (INTEGRATED REFINERY EXPANSION PROJECT), Kerala

    CLIENT

    : BHARAT PETROLEUM CORPORATION LIMITED, KOCHI

    CONSULTANT

    : ENGINEERS INDIA LIMITED, NEW DELHI

    SPEC NO. : 7303-B00-01005


    REVISION : 0
    DATE

    : 22.02.2014

    W.O. NO.

    : 3M0043

    7.0 DESIGN REQUIREMENT:


    Codes and Standards:
    The bidder shall design the equipment / components of all the systems, total water & air consumption, sizing of
    the piping, pumps & compressors, pressure drop in the piping, equipment as per relevant section of the
    specifications enclosed and actual physical parameters of equipment involved.
    For water & air services,
    All isolation Valves (unless otherwise specified) will be of Forged /cast steel body Ball
    Valve as per BS: 5351(full bore),
    The layout of water pumps shall be such that it shall be possible to maintain any pump set without disturbing
    the operating pump set. It shall be possible to remove the water pump and / or motor for maintenance by
    disconnecting the pump coupling from the discharge piping. It should not be necessary to dismantle the
    discharge piping for removing any pump. The pumps shall be of back pull out type.
    The layout of water and air piping for dust suppression system shall be such that all valves are easily
    accessible for maintenance. All water and air pipes shall be run in conveyor galleries. However, where it is
    difficult to run air and water pipes in conveyor galleries particularly outside the switch gear room / control room
    cum pump house before reaching nearest conveyor gallery and in stock yard areas, those are to be buried.
    The overhead piping shall have a minimum working clearance of 2.5m head room over walkways and working
    areas in buildings.
    All piping shall be arranged to provide clearance for the removal of equipment requiring maintenance and for
    easy access for valves & other piping accessories required for operation & maintenance. Layout drawings shall
    also indicate orientation of valves and availability of access to valves and specialities.
    Access walkways / space between equipment / steps etc., in the switch gear room /control room cum pump
    house shall be minimum 1000 mm. Suitable hand railing shall be provided for personnel safety, wherever
    required.
    Wherever pipes / Cables cross roads / plant areas the minimum head room of 6 metres above road / grade
    level shall be maintained.
    Standards:
    IS: 778 Gun Metal gate, globe & check valve for general purpose.
    BS: 5150: Cast Iron gate valve for water works purposes.
    BS: 5152: Cast Iron globe valve for water works purposes.
    BS: 5312: Cast Iron check valve for water works purposes.
    IS: 1239: Mild Steel tubes & fittings.
    IS: 2379: Color for identification of pipe line.
    IS: 2906: Sluice valve for water works purposes.
    IS: 3589: Electrically welded steel pipes for water, gas & sewage (200 to 2000mm)
    IS: 5312: Swing check valve reflux (non return) valve.
    IS: 1520: Horizontal centrifugal pump for clean, cold fresh water.
    IS: 5120: Centrifugal pump for clean, cold fresh water.
    BS: 5169 & BS: 1123: Air receivers.
    ANSI B 31.1: Code for pressure piping.
    Hydraulic institute standards of U.S.A.
    Material for Pipes, Valves & Joints please refer notes from P&ID for DWS, DFDS, SWS & PWDS system
    (Drawing no. 3M0045 Q10 000 02) attached with this specification.
    Material of Construction:
    Pipes, fittings

    Lot

    Valves and flanges


    Spray nozzles
    Deluge valves
    Detector piping

    Nos.
    Nos.
    Nos.
    Lot

    PREPARED BY: CHETAN

    CS for mains and


    MS-GI (HVY) screwed piping for spray system upto 6diameter.
    C.S.
    Cu Alloy
    C.I.
    G.I.
    APPROVED.BY: D. MITRA.

    PAGE 6 OF 13

    You might also like