3) DB11 Detector Base

s
Data Sheet
Fire Safety & Security Products
Specialized Detection Devices

DB Series Detector Bases
Models DB2-HR, DB-11 and DB-11E
ARCHITECT AND ENGINEER SPECIFICATIONS
Each detector base is compatible with Model H, 11
and 121 series of conventional detectors
All bases compatible with the optional Model LK-11 detector-locking kit
Each detector base also functions with the addressable
Model H series, as well as Models FDO421, FDOT421,

FDOOT441, FDOOTC441 and FDT421 intelligent devices
Model DB2-HR
Model DB2-HR is also compatible with ASAtechnology detectors

Model DB2-HR has backwards compatibility with Siemens
Model 'H'-series intelligent detectors
Models DB-11 and DB-11E mount on a 4-inch square,
Model DB-11E
octagon or single-gang electrical box
Model DB-11
Model DB-11 has plugs to cover the outer-mounting screw holes
Model DB2-HR mounts on a 4-square, double-
gang electrical box
UL 268 Listed, ULC-S529 Listed;

FM, CSFM and NYC Fire Department Approved
Product Overview
Specifications (continued)
The detector bases are low-profile, surface-mounting bases

used on various Siemens Fire Safety conventional and
addressable detectors.
Model DB2-HR, which is a redesign of Model DB-HR, is
compatible with the standard, addressable type of
intelligent detectors, as well as those detection devices
that operate with ASAtechnology.
Additionally, Model DB2-HR is backward compatible with
the Siemens Model 'H'-series intelligent detectors and
detector-assigned FACPs. Model DB2-HR can also operate
with Siemens' 50-point addressable; 252-point
addressable; 504-point addressable, and FireFinder XLS
fire systems. A relay output from the fire detector base for
signaling other devices is provided by Model DB2-HR.
The detector bases use screw-clamp contacts for electrical
connections and self-wiping contacts for better reliability.
Further, the bases can be used with the optional Model LK11 detector locking kit, which contains 50 detector locks
and an installation tool, to prevent unauthorized removal
of the detector head.
Moreover, Models DB-11 and DB-11E mount on a 4-square,

(10.2 cm) octagon or single-gang box. Model DB-11 has
integral, decorative plugs to cover the outer screw holes.
However, Model DB2-HR mounts on a double-gang, 4-inch
(10.2 cm.) square electrical box.
Dimensions
Model DB-11
Note:
Model DB-11E base detector has a diameter dimension of 4.5 (11.4 cm.).
Mounting Diagram
Model DB2-HR
Specifications
Models DB-11 and DB-11E are the standard bases for
Model H-series 11 and Model 121-series conventional
detectors, as well as the Model H-series addressable
detectors. Model DB-11 has a 6-inch (15.2 cm) diameter.
The diameter for Model DB-11E is 4.5 inches (11.4 cm).
Notes: The Module Barrier (shown to the right) must be used when Model DB2-HR relay contacts are
connected to non-power-limited circuits. Break apart the barrier to the correct size and shape
for either the 4-inch square or double-gang box. Install the barrier diagonally into the back box
to create two (2), separate compartments with the back box, in order to separate the wires.
s Industry, Inc.
Building Technologies Division
Detector Bases [DB Series]
6161
Wiring Diagrams
Note: The illustration above is typical wiring for Models DB-11 and DB-11E (using Models PE-11, PE-11T, DT-11, OP121, OH121, and HI121 detectors).
Note: The illustration above is typical wiring for Models DB-11 and DB-11E (using Models FP-11, FPT-11, FS-DP, FS-DPT, and FS-DT detectors).
Note: The illustration above is typical wiring for Models DB-11 and DB-11E (using Models HFP-11 Series and SFP-11 Series detectors).
Note: The illustration above is typical wiring for Model DB2-HR for polarity-insensitive detectors).
Details for Ordering

Model
Number
Part
Number
AD2-P
AD2-PR
DB-11
DB-11C
DB-11E
DB-HR
500-649706
500-649707
500-094151
500-095687
500-094151E
500-033220
DB2-HR
S54370-F12-A1
DT-11
DT-11C
FDO421
FDOT421
FDT421
FDOOT441
FDOOTC441
LK-11
Description
Air-Duct Housing
Air-Duct Housing with Relay
Low-Profile Surface-Mount Base
Low-Profile Surface-Mount Base [Canada]
Smaller-Diameter Detector Base
Relay Base for H-Series Intelligent Detector
Relay base compatible with S-Line and C-line detectors;
backwards compatible with Model H-series detectors
500-095430
135F {57.2C}Low-Profile Thermal Detector
500-095983
Low-Profile Thermal Detector [Canada]
S54320-F4-A1 Photoelectric Smoke Detector
S54320-F6-A1 Addressable Multi-Criteria Fire Detector
S54320-F5-A1 Thermal (Heat) Detector
S54320-F7-A1 Multi-Criteria Fire Detector with ASAtechnologyTM
S54320-F8-A1 Multi-Criteria Fire / CO Detector with ASAtechnologyTM
500-695350 Base Locking Kit for Model 11-series detectors
Model
Number
Part
Number
FP-11
FP-11C
FPT-11
FPT-11C
HFPO-11
HFP-11
HFPT-11
HI121
OH121
OP121
PE-11
500-095112
500-095112C
500-095918
500-095918C
500-034800
500-033290
500-033380
S54372-F3-A1
S54372-F2-A1
S54372-F1-A1
500-094150
PE-11T
500-095150
SFP-11
SFPO-11
SFPT-11
500-33290C
500-34800C
500-033380C
Description
FirePrintTM Intelligent Detector
FirePrintTM Intelligent Detector [Canada]
Thermal Detector
Thermal Detector [Canada]
FS-250 Addressable Detector
FirePrintTM Detector
Thermal Detector
Heat Detector
Multi-Sensor Smoke Detector
Photoelectric Smoke Detector
Conventional Photoelectric Smoke Detector
Photoelectric Smoke Detector with 135F
{57.2C} Thermal Sensor
Photo / Thermal Detector [Canada]
Photo Detector [Canada]
Detector Package [Canada]
Notice: This marketing data sheet is not intended to be used for system design or installation purposes.
For the most up-to-date information, refer to each products installation instructions.
s Industry, Inc.
Building Technologies Division
Fire Safety
8 Fernwood Road
Florham Park, NJ 07932
Tel: (973) 593-2600
FAX: (908) 547-6877
URL: www.usa.Siemens.com/Fire
(SII-FS)
Printed in U.S.A.
Fire Safety
2 Kenview Boulevard
Brampton, Ontario
L6T 5E4 / Canada
Tel: (905) 799-9937
FAX: (905) 799-9858
September 2012
Supersedes sheet dated 4/12
(Rev. 1)

3) DB11 Detector Base

Uploaded by

Copyright:

Available Formats

3) DB11 Detector Base

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

3) DB11 Detector Base

Uploaded by

Copyright:

Available Formats

s

Specialized Detection Devices

and 121 series of conventional detectors

Each detector base also functions with the addressable

Model H series, as well as Models FDO421, FDOT421,

Model DB2-HR is also compatible with ASAtechnology detectors

Models DB-11 and DB-11E mount on a 4-inch square,

octagon or single-gang electrical box

Model DB-11 has plugs to cover the outer-mounting screw holes

Model DB2-HR mounts on a 4-square, double-

gang electrical box

UL 268 Listed, ULC-S529 Listed;

The detector bases are low-profile, surface-mounting bases

Moreover, Models DB-11 and DB-11E mount on a 4-square,

Detector Bases [DB Series]

Details for Ordering

You might also like