Data Sheet: Vmebus Embedded Computer With Mobile Pentium Iii 400Mhz Processor

DATA SHEET
E P C - 1 3 1 6
VMEBUS EMBEDDED COMPUTER WITH

MOBILE PENTIUM III 400MHZ PROCESSOR
The RadiSys EPC-1316 is a highly

integrated, single slot VME computer
powered by Intels Mobile 400MHz
Pentium III. Designed for high
performance and high reliability, the
EPC-1316 offers a full complement of
PC features in a rugged 6U VME
form factor.
F E AT U R E
S U M M A R Y
Intel Pentium Mobile III 400 MHz Pentium III

with 440BX chipset
256KB on-dye L2 cache using synchronous
pipeline burst SRAM
Support of 512 EDO DRAM via two 144-pin
SODIMM modules
VGA/SVGA/XGA graphics controller with
integrated two MB video memory via front panel
15 pin standard connector
Ethernet 10/100BaseT via front panel
RJ-45 connector
Front panel connectors for PS/2 keyboard, PS/2
mouse, USB, serial (COM1)
Operates as VMEbus master or slave
A16/A24/A32 addressing with D08/D16/D32
data accesses
Secondary EIDE channel, floppy and parallel port
via VME P2 connector
PCI Mezzanine Card (PMC) expansion site
Primary EIDE channel, floppy, parallel and second
serial port (COM2) accessible via high density
on-board connectors
Optional expansion board with 2.5 EIDE disk
drive and either 5 additional serial ports, 10/100
ethernet, and compact flash support.
Optional module supports Compact Flash solid
state disk operating as a true IDE drive (no
special BIOS extensions or flash file system
drivers required). Available only for applications
not using the PMC expansion site.
Microsoft* DOS, Windows* 95 and Windows NT*
4.0 compatible. Available with RadiSys
EPConnect software, providing the developer
with an easy to use software interface to the
VMEbus and EPC-15 hardware.
VxWorks 5.3 compatible including board
support package - BSP
Single slot, 6U form-factor (two slots with
optional mass storage and I/O expansion board)
At the heart of the EPC-1316 is Intels

most advanced Mobile Pentium III
processor to date. The EPC-1316's
Pentium III processor offers 400MHz
performance while dissipating less than
half the power of a standard Pentium III
processor. This allows the EPC-1316 to
operate with a passively cooled processor
heatsink, which further enhances the
system reliability. The product can also
be upgraded to operate with a 700MHz
processor. The EPC-1316 supports both
Master and Slave and 8, 16 and 32 bit
address and data.
The EPC-1316 can be fitted with an

optional second slot Feature Board.This
Feature Board (MSF) is configured for
further Mass storage and I/O Expansion.
This configuration provides an on-board
2.5 EIDE hard disk, 5 additional Serial
ports, support for compact flash and
10/100 Ethernet via RJ45. For
applications requiring mass storage
without using a second slot, a
low-profile, solid state (ATA Compliant)
flash disk module is available for the
EPC-1316. Because of the optional
Feature Board the EPC-1316 can be
feature enriched very easily and at a
much lower cost than almost all other
boards in the market place.
SPECIFIC ATIONS
F E AT U R E
FUNCTION
O R D E R I N G I N F O R M AT I O N
Board Style
Call for pricing and availability.

Refer to the order codes below.
CPU
VMEbus 6U
Intel 400MHz Pentium III (Upgradable to 700 MHz)
256KB on-dye L2 cache using synchronous pipeline burst SRAM
Intel 440BX AGPset: 82443BX
Capacity
Up to 256MB EDO DRAM via two 144-pin SODIMM modules
Specification
60ns, 32/64/128MB, 3.3V SODIMMs
BIOS Type
Phoenix BIOS with 1MB flash and battery backed CMOS RAM
Special Features
APM 1.2; IDE drive auto-configure; multilingual support
Integrated PCI EIDE
Two independent channels, four IDE devices. Primary channel
via high density board-board connector, secondary channel via
P2 VMEbus connector
Universal Serial Bus (USB) Single host USB port
Serial
Two serial ports. COMA is RS-232 via front panel DB9
connector, COMB via board-board option connector accessible
by MSIO expansion
Parallel
One IEEE-1284-1994 compatible bi-directional parallel port via
P2 connector or board-board optional connector (only one may
be used at a time)
Floppy controller
Standard PC-compatible floppy controller via P2 connector or
board-board option connector.
Cache
PCI Chipset
DESCRIPTION
System Memory
EPC1316BASE128 - Base unit with 400MHz

processor and 128MB of Memory
System BIOS
EPC1316MSF128 - Base unit with MSF board

(optional mass storage, ethernet and 5 serial
ports), 400MHz processor and 128MB
of Memory
On-board I/O
OPTIONS
CFSM - optional Compact-Flash socket module

Compact-Flash card not included
Keyboard
Mouse
Graphics
Fast Ethernet
VMEbus interface
Other features
Real Time Clock

Battery
Watchdog timer
Connectors
Front panel
Rear panel VME P1
Rear panel VME P2
Optional MSf
second slot
Mass storage and

I/O carrier
expansion board
Ethernet
Serial
Environment
Power Requirement
2003 RadiSys Corporation. RadiSys and EPC are registered

trademarks of RadiSys Corporation. *All other trademarks are the
properties of their respective owners. All specifications within this
document are subject to change without notice. 07-1061-02 0603
Operating Temp.
Typical w/ SVGA
64MB memory
DESCRIPTION
PS/2 compatible
PS/2 compatible
SVGA/XGA with 4MB video memory supporting resolutions up
to 1280x1024 (C&T69030)
10/100Mbit via front panel RJ45 connector (Intel 82559-ER)
Universe II PCI-VMEbus bridge
Supports master or slave operation in A16/A24/A32 address
spaces for D08/D16 and D32 data widths. Generates and
responds to all 7 VMEbus interrupts.
Accurate to 13 minutes/yr., 10 year expected life
Field replaceable 3.0V, 200mAH CR2032 (or equivalent)
lithium battery
Programmable reset interval ranging from 128 milliseconds to
8.2 seconds
PS/2 keyboard, PS/2 mouse, DB9 serial, Ethernet 10/100 RJ45,
DB15 VGA
96 pin standard VME
96 pin VME with user defined secondary IDE, floppy, parallel
port and reset control signal
Connects with the host EPC-1316 board via two 80 pin-stacking
connectors. Provides 2.5 EIDE disk drive, 5 serial ports, and sec10/100 ethernet port
10/100 Ethernet with RJ45 connector
COM2 (routed from EPC-1316) jumper selectable RS-232 or
RS-485, COM 3-6 provided by on-board UARTs (RS-232). All
via front panel DB9
0 - 55C derated 2C per 1000 ft (300 m) over 6600 ft (2000m)
11.5W for CPU, 59W total System worst case
+5V=10.082 Amps, +12V=.519 Amps, -12V=.519 Amps
World Headquarters
5445 NE Dawson Creek Drive
Hillsboro, OR 97124 USA
Phone: 503-615-1100
Fax: 503-615-1121
Toll-Free: 800-950-0044
Customer Service: 800-256-5917
Product Support: 800-438-4769
www.radisys.com
International Headquarters
10 Centech Park
Fringe Meadow Road, Redditch
Worcestershire, B98 9NR
United Kingdom
Phone: +44 (0) 1527 588800
Fax: +44 (0) 1527 588801

Data Sheet: Vmebus Embedded Computer With Mobile Pentium Iii 400Mhz Processor

Uploaded by

Copyright:

Available Formats

Data Sheet: Vmebus Embedded Computer With Mobile Pentium Iii 400Mhz Processor

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Data Sheet: Vmebus Embedded Computer With Mobile Pentium Iii 400Mhz Processor

Uploaded by

Copyright:

Available Formats

DATA SHEET

VMEBUS EMBEDDED COMPUTER WITH

The RadiSys EPC-1316 is a highly

Intel Pentium Mobile III 400 MHz Pentium III

At the heart of the EPC-1316 is Intels

The EPC-1316 can be fitted with an

Call for pricing and availability.

EPC1316BASE128 - Base unit with 400MHz

EPC1316MSF128 - Base unit with MSF board

CFSM - optional Compact-Flash socket module

Real Time Clock

Mass storage and

2003 RadiSys Corporation. RadiSys and EPC are registered

You might also like