Scribd
Upload
169 views1 page

Section VIII: Engine Maintenance/Monitoring Features

The document discusses engine maintenance and monitoring features, including: 1. A Maintenance Monitor (Oil Change Monitor) that counts engine operating hours and signals when an oil change is needed. It can be reset manually or with service tools. 2. An Oil Level Monitor that detects low oil levels and notifies the operator to add oil. It also provides oil level data to other engine features. 3. A Fuel Consumption Rate Log that tracks instantaneous and average fuel economy over time to monitor performance and troubleshoot issues.

Uploaded by

manoj262400/2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
169 views1 page

Section VIII: Engine Maintenance/Monitoring Features

The document discusses engine maintenance and monitoring features, including: 1. A Maintenance Monitor (Oil Change Monitor) that counts engine operating hours and signals when an oil change is needed. It can be reset manually or with service tools. 2. An Oil Level Monitor that detects low oil levels and notifies the operator to add oil. It also provides oil level data to other engine features. 3. A Fuel Consumption Rate Log that tracks instantaneous and average fuel economy over time to monitor performance and troubleshoot issues.

Uploaded by

manoj262400/2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AEB 15.

40
Page 27 of 34

Section VIII: Engine Maintenance/Monitoring Features


39. Maintenance Monitor
The Maintenance Monitor (Oil Change Monitor) feature provides a method of monitoring the oil change interval
of an industrial engine and signaling the operator when an oil change is needed.
The maintenance Monitor counts the hours of engine operation and subtracts this from the oil change interval
time. The Maintenance Monitor feature also allows for extended oil change intervals when the customer is
using such products as Premium Blue 2000. Programming tools can be used to display the percent of the
current interval that has been consumed.
When a certain calibratible percentage of the oil change interval time has been used, the MAINTENANCE lamp
is flashed at key on and a warning flag is set. The Maintenance Monitor can be reset using service tools or a
manual method as follows:
Maintenance Monitor Manual Reset with the Diagnostic Test Switch
1. Keyswitch ON with engine shutdown
2. Diagnostic Test Switch ON for > 3 seconds then OFF
3. Diagnostic Test Switch ON twice more briefly < 3 seconds each on OFF and after
4. Diagnostic Test Switch ON for > 3 seconds then OFF
5. The warning lamp will flash 3 quick flashes signifying a successful request
6. The manual reset sequence must be completed within a maximum of 30 seconds

40. Oil Level Monitor - Low


The Oil Level Monitor feature provides information about the oil level to both the operator and the ECM features
which require this information. The Oil Level Monitor feature accomplishes this by interpreting an A/D input for
the engine oil level and a switch input for the remote oil reservoir. It will tell the operator when to add oil,
providing an oil level check without shutting down the engine. During the low oil level condition, the yellow
(warning) lamp will be illuminated. It will also provide data to the Centinel and Engine Protection features
regarding the existence of a very low engine oil level. During the very low oil level condition, the Centinel
feature will be shutoff and the Engine Protection feature will be used.
Exceptions
QSB

not available

QSC

not available

QSL9

not available

QSK19

not available

QSM11

not available

QSX15

not available

QST30

not available

41. Trip Information - Fuel Consumption Rate Log


The fuel Consumption Rate Log feature allows INSITE to access data that tracks instantaneous fuel economy
and fuel rate over a 40 hour time span in increments of one hour. It also tracks a non-resettable running
average of fuel consumption rate over the lifetime of the engine. This feature can be used to enter warranty
information related to fuel consumption, to trouble-shoot customer issues regarding poor fuel economy, and to
verify engine performance during field test or for gathering data. This feature can also be used by an operator
or customer to monitor, track and possibly improve performance of the machine.

You might also like