0803NSCmar08 (Euro Combination)

NEW STEEL CONSTRUCTION
MARCH 2008 VOL16 NO3
www.new-steel-construction.com
BREEAM Excellence in Sheffield

New city library for Newcastle
Tank museum on track
New Elements in Livingston
NSC March 2008
CONTENTS
MARCH 2008 16 3
VOL
28
NO
22
These and other

steelwork articles can
be downloaded from the
New Steel Construction
website at www.newsteel-construction.com
15
16
12
14
16
18
20
22
26
Cover Image
Vulcan House, Sheffield
Client: Home Office Property
Project consultant:
Mott MacDonald
Steelwork contractor:
Robinson Construction
Steel tonnage: 1,000t
28
30
34
36
37
38
40
42
Editors comment Away from excitable news headlines, the message from the steel sector is
that business is continuing as usual.
News The 2007 Market Shares Survey shows steels total market share remains above 71%.
Profile Andrew Mannion, the first Chairman of the BCSAs new Republic of Ireland Region,
says the BCSA can only be beneficial to the local steel construction sector.
Speed of construction is one of the principal reasons why the new Leicester Grammar School
is being built with steel.
Once complete later this year, The Elements shopping centre will turn Livingston into one of
Scotlands leading retail destinations.
The combination of steel and glass will make the new Newcastle City Library a stand-out
landmark structure.
The Case for Steel series of articles continues with a look at the reasons why steel is the best
health and safety option.
The Home Offices new Sheffield headquarters is one of the UKs greenest structures and the
first building in the city to receive a BREEAM Excellent rating.
New steel bridges are replacing roundabouts at six junctions on the A1 between Peterborough
and Blyth.
Bovingtons historic collection of tanks will soon be housed in a new purpose-built display hall.
Loads and ULS load combinations to the Eurocodes are explained in this months technical
article from the SCI.
40 Years Ago Our look back through the pages of Building with Steel features the Lockheed
Companys double cantilever hangar.
Publications
Codes and Standards
Advisory Desk The latest advice from the SCI - AD 319 - is an update on the fire protection of
beams with web openings.
BCSA members
SCI members
NSC March 2008
S t r u c t u ra l P r o d u c t s
The future is..
Lighter
Stiffer
Stronger
...with Kingspan
Multibeam Mk4
Greener
Now in its 4th Generation with over forty years of development,

Kingspan Multibeam Mk4:
Is manufactured using a high yield steel

Is stronger and lighter
Has a wider flange
Has an increased range of sections and a more economical
range of sleeves available
Kingspan design software now links to the CSC Fastrack

(whole roof software design option)
To register and download your free copy of the Technical

handbook, and the latest Toolkit 5 software, visit
www.kingspanstructural.com, call 01944 712000 or email
[email protected]
S t r u c t u ra l P r o d u c t s
4
NSC March 2008
NEW STEEL CONSTRUCTION
MARCH 2008 VOL16 NO3
www.new-steel-construction.com
EDITOR
Nick Barrett Tel: 01323 422483
[email protected]
DEPUTY EDITOR
Martin Cooper Tel: 01892 538191
[email protected]
CONTRIBUTING EDITOR
Ty Byrd Tel: 01892 524455
[email protected]
PRODUCTION EDITOR
Andrew Pilcher Tel: 01892 524481
[email protected]
PRODUCTION ASSISTANT
Alastair Lloyd Tel: 01892 524536
[email protected]
NEWS REPORTERS
Mike Walter, Victoria Millins
ADVERTISING SALES MANAGER
Sally Devine Tel: 01474 833871
[email protected]
PUBLISHED BY
The British Constructional Steelwork Association Ltd
4 Whitehall Court, Westminster, London SW1A 2ES
Telephone 020 7839 8566 Fax 020 7976 1634
Website www.steelconstruction.org
Email [email protected]
The Steel Construction Institute
Silwood Park, Ascot, Berkshire SL5 7QN
Telephone 01344 636525 Fax 01344 636570
Website www.steel-sci.org
Corus Construction and Industrial
PO Box 1, Brigg Road, Scunthorpe, North Lincolnshire DN16 1BP
Telephone 01724 404040 Fax 01724 404224
Website www.corusconstruction.com
CONTRACT PUBLISHER &
ADVERTISING SALES
Barrett, Byrd Associates
Linden House, Linden Close,
Tunbridge Wells, Kent TN4 8HH
Tel: 01892 524455
www.barrett-byrd.com
EDITORIAL ADVISORY BOARD

Dr D Tordoff (Chairman); Mr N Barrett; Mr D G Brown, SCI;
Mr M Crosby, Capita Symonds; Mr R Gordon, Mace Ltd;
Mr W Gover, Consultant; Mr R Harrison, Glentworth Fabrications
Ltd; Mr A Hughes, Consultant; Mr A Palmer, Buro Happold;
Mr R Steeper, Corus; Mr O Tyler, Wilkinson Eyre,
Mr M Webb, Corus
The role of the Editorial Advisory Board is to advise on the overall style
and content of the magazine.
New Steel Construction welcomes contributions on any suitable topics relating to
steel construction. Publication is at the discretion of the Editor. Views expressed in
this publication are not necessarily those of the BCSA, SCI, Corus or the Contract
Publisher. Although care has been taken to ensure that all information contained
herein is accurate with relation to either matters of fact or accepted practice at the
time of publication, the BCSA, SCI, Corus and the Editor assume no responsibility for
any errors or misinterpretations of such information or any loss or damage arising
from or related to its use. No part of this publication may be reproduced in any form
without the permission of the publishers.
CHANGES TO THE MAILING LIST

If you wish to notify us of a change:
Non Members of either the SCI or the BCSA please telephone
Corus on 01709 825452
Members BCSA Telephone BCSA on 020 7839 8566
Members SCI Telephone SCI on 01344 636525
Sustainability
underpins healthy
market share
While the woes of the financial sector continue to excite the headline
writers, more positive news is beginning to filter through from those
who work in the real world of manufacturing and product and services
provision. The growing message seems to be that away from credit
crunches business seems to be largely going on much as usual.
Admittedly, some housebuilders seem to be struggling and there have
been one or two stories about developments being put on ice until
funding can be more easily raised, but the rest of UK industry, and
certainly the construction part of it, seems to be in a positive frame of
mind. Steelwork contractors at the BCSAs annual dinner (see News)
seemed confident enough. Order books are healthy and, with the few
exceptions already mentioned, business seems to be good.
The new Market Shares Survey from independent researchers
Construction Markets (see News) provides grounds for confidence.
Steel is holding its market share at what were pretty heady levels; the
market appreciates that steel delivers substantial advantages quite
apart from cost. These other advantages would often be significant
enough to sway some towards steel, even if alternative materials
somehow managed to make up some of the cost gap between
themselves and steel.
Whatever the outcome for industry workloads this year, steel looks
like being extremely well placed to at least hold onto its share of the
market. The growing realisation that the world has to combat climate
change should bring further gains. Sustainability has emerged as a
strong business driver for the clients of the construction industry, for
Corus and for all steelwork contractors. Unknown perhaps to most
users of steel over the years, they were using a material with a strong
sustainability case.
Visitors to the Futurebuild exhibition last month will have seen some
of the sustainability benefits on two stands dedicated to steel. Corus
produced a brochure specially for the event outlining those benefits
and a major advertising campaign is about to get under way that will
spread the message further.
The strength of steels sustainability case may come as a pleasant
surprise to some who had been happy to use it purely on grounds
like health and safety, cost and flexibility. Factoring in sustainability
benefits can only strengthen the appeal of steel as the first choice
framing and bridge building solution.
SUBSCRIPTIONS
To take out a subscription please telephone 01344 636525
Annual subscription 97.00 UK, 123.00 elsewhere.
All rights reserved 2008. ISSN 0968-0098
The British
Constructional
Steelwork
Association Ltd
Nick Barrett - Editor

NSC March 2008
NEWS
Steel remains the competitive choice

80.0%
70.0%
60.0%
% based on Floor Area
Steel is confirmed as the structural framing

solution of choice of the overwhelming bulk of the
multi storey buildings market in the 2007 Market
Shares Survey. The survey, by independent market
researchers Construction Markets, shows that
steels total market share remained above 71%.
Steel enjoyed a near 72% share of the key
multi storey offices market. Nearest rival, in situ
concrete, remained at below a 20% market share,
having first fallen below 20% in 2003.
The survey is the 27th in a series going back
to 1980, and charts the success of steel as the
leading structural framing material, largely at the
expense of in situ concrete. Some 600 specifiers
are contacted by the researchers for the study,
making it the biggest of its type in the UK.
The survey shows that the total multi storey
buildings market showed growth of 8%. The
offices market grew by over 22% in 2007 to over
five million metres of floorspace. The other
buildings category, which includes retail, leisure,
education and health buildings, grew by 1.6%, with
rises in retail and leisure counter-balancing falls in
education and health.
Alan Todd, General Manager Corus
Construction Services and Development, said:
The performance of steel in the construction
50.0%
40.0%
30.0%
20.0%
10.0%
0.0%
19 80
1981
198 2
1 983
198 4
1 985
1986
Steel
19 87
1988
198 9
1 990
Insitu Concrete
199 1
19 92
1993
19 94
Precast Concrete
1995
199 6
1 997
1998
19 99
Load Bearing Masonry
2000
200 1
2002
200 3
2 004
2005
20 06
The Market for Structures Non-Residential Multi-Storey Buildings Total.

market has been one of the great industrial
success stories of the post war period in the UK.
It is no surprise that the 2007 survey confirms that
the continuing competitive advantage of steel is
appreciated by designers, clients and specifiers.
There are a number of initiatives underway
within the steel sector that will mean more
designers and clients in the future will be
convinced of the overwhelming advantages
to be gained from using steel. Sustainability is
growing in importance all the time and steels solid
credentials in this area are being increasingly

appreciated.
Mr Todd added that Corus successful launch
of Advance as the new name for its range of
structural sections 18 months ago was appreciated
by designers for helping them comply with the
Construction Products Directive (CPD). Since
September 2006 designers need to be sure that
sections they specify comply with the CPD, and
choosing Advance, the worlds first CE marked
section, is the simplest way to achieve this.
Britains tallest free-standing artwork unveiled

Designs have been revealed for a steel sculpture that will be the highest
free-standing work of art in the UK.
Known as Aspire and designed by Ken Shuttleworth, the 60m-high artwork will be located on the University of Nottinghams Jubilee Campus.
The 800,000 red and orange steel structure will be set up by July this
year and forms part of the sites regeneration.
The steelwork will be delivered to site in three sections - with a total
weight of 50t - by Watson Steel Structures.
Foundation work will include 36 piles and 256m3 of concrete which will
form the base for the steelwork.
Designer Ken Shuttleworth, said: The sculpture symbolises both the innovation and expertise that the University of Nottingham represents, and
the exciting new era that the University enters as Jubilee Campus undergoes its transformation.
Steel provides boost for new hospital

Structural steel is fulfilling a key role in the progress of the Birmingham New
Hospitals Project which is currently under construction by a joint venture
between Balfour Beatty Construction and Haden Young, the building services
arm of the Balfour Beatty Group.
The new Acute Hospital has three distinctive towers which will make a
prominent addition to the citys skyline and provide state-of-the-art medical
facilities for the University Hospital Birmingham NHS Foundation Trust and the
Birmingham and Solihull Mental Health NHS Trust.
A total of 12,500t of steelwork is being fabricated, supplied and erected by
Severfield-Reeve for the project. To date, approximately 90% of this has been
erected, while cladding and internal fit out is well under way.
Completion of the project has been set for autumn 2012, and in the next four
years the JV will erect the towers of the hospital and construct the mental
health facilities around them, provide a large car parking area and refurbish
some of the retained buildings - at a total cost of 570M.
6
NSC March 2008
2007
Timber
NEWS
Steel looks confidently ahead
BCSA President Richard Barrett.
The steel construction sector was

looking confidently to the future
with healthy forward order books, to
as far ahead as 2009 in some cases,
BCSA President Richard Barrett
told the National Dinner.
In his address to guests at the
Dorchester Hotel on 28 February
Mr Barrett said last year the sector
achieved record sales of 1.6M
tonnes of steel. Members were
confident about their prospects
despite recent troubles in the
financial world.
He was pleased that the
government
was
undertaking
its review of the Construction
Act, although he noted that the
current review, underway now
for four years, was taking longer
than the original Act to prepare.

Reforms to the payment regime
were urgently needed. Mr Barrett
urged members who found that
their public sector clients were not
behaving in accordance with the
Office of Government Commerce
(OGC) guidelines for fair payments
to report them to the OGC.
Mr Barrett welcomed the
publication by BCSA of the new
Guide to the Allocation of Design
Responsibilities in steel construction,
which was designed to help clients
by having projects delivered more
efficiently, and to ensure that
steelwork contractors know the
extent of their liabilities. There was
a programme of publications under
way, for example with a guide to
bridgeworks being prepared. Other

design guides were being produced
jointly by BCSA, Corus and the Steel
Construction Institute.
Mr Barrett also announced
a major drive by Corus and the
BCSA to spread the sustainability
messages about structural steel,
through advertising and other
promotional efforts.
He warned members that CE
Marking of structural sections was
coming in October this year and
would be mandatory a year later.
BCSA was producing courses to
help members prepare.
Mr Barrett concluded by
reaffirming BCSAs commitment
to serving the steel construction
industry.
as more time promised for Eurocodes

Shadow Secretary of State for
Business Alan Duncan MP has
promised that a Conservative
government would make it a priority
to allow more time for the introduction
of Eurocodes.
Speaking at the BCSAs National
Dinner Mr Duncan said: Steel faces
a difficult transition from BSI to new
European standards. The introduction
of the Eurocodes is a nightmare
for the industry. Mr Duncan said
hurried training programmes were
being forced on the industry. He said:
I assure you that a Conservative
government would make it a priority
to give more time to make that

change.
Mr Duncan also congratulated
the steel industry for massively
increasing its market share in recent
years. The industrys success was due
to listening to what the market said it
wanted, adapting to globalisation and
proving that the UKs manufacturing
sector is not dead.
Mr Duncan attacked the level of
regulation faced by business and
said more could be done to lift the
burden. He criticised the government
for having had seven construction
ministers in the past ten years:
You need a dedicated minister for

construction, someone who can fight
your corner in Whitehall, he said.
Mr Duncan also acknowledged
that serious changes were
required to the Construction Act, in
particular to the payment related
sections. Payment procedures need
to understand the nature of the
modern construction industry, he
said. With the Olympics looming, the
government could not afford to take
the construction sector for granted,
and issues such as payment and
regulation needed to be addressed
as urgent priorities.
Shadow Secretary of State for

Business, Alan Duncan MP.
Museum of Liverpool gets iconic structure

X-shaped in plan, the new Museum
of Liverpool will on completion be a
striking addition to the fast changing
Mersey riverfront.
Designed by Danish architects
3XN, the structure is located at
Pierhead and will replace the
existing Museum of Liverpool Life
which is considered to be too
small to house an ever-increasing
collection.
Working on behalf of main
contractor Galliford Try, Caunton
Engineering is fabricating, supplying
and erecting more than 2,000t of
structural steelwork for the project.
Cauntons Contracts Manager
Gary Hatton, said: We are currently

completing phase one of three
phases which includes connecting
steelwork to circular and square
concrete cores.
This phase also has a huge
amount of complex steelwork, with
a number of differing angles and
shapes to form the centre of the
structures X.
The final two phases will see
Caunton erecting the four fingers
of the X-shape and this will involve
temporary propping for two large
cantilevers, one of which will house
a viewing gallery overlooking the
Mersey.

NSC March 2008
NEWS
AROUND THE PRESS
Construction News
31 January 2008
Steelwork deal
for Stratford centre
Severfield-Rowen is set to pick
up a 75 million steel contract
on Westfields scheme to build
the giant shopping complex
that will go up in east London
ahead of the 2012 Olympics.
One source said: The final
amounts are still being decided, but it will be significantly
larger than White City. Its
looking like double.
Building Magazine
1 February 2008
Pilot project
A number of techniques were
used at T5 to speed up construction. For example BAA
wanted to improve productivity by 10-15% using off-site
construction. The roof sections were made on the ground
and jacked into position, which
was a technique borrowed
from bridge building.
Construction News
7 February 2008
Demand for structural
steel is still rising
The UK structural steel market
was estimated to have grown
by two per cent last year, with
overall tonnages of steel up to
1,592,000 according to the latest report from research company MBD. The growth, which
is part of an overall increase
of 21 per cent since 2001, has
been attributed to the part the
steel fabrication sector has
played in the overall growth of
the UK construction industry
during this period.
Building Magazine
8 February 2008
Golden wonder
Referring to Colchester arts
centre - The most tricky aspect of the frame manufacture
was bending the 600mm deep
top steel sections of the frame
to the correct radius. This was
done by steel bending specialist the Angle Ring Company.
New Civil Engineer
14 February 2008
Beijing TV centre
building soars to finish
The spectacular 223m tall
building contains 10,000t of
steel and has been designed
to withstand an earthquake
measuring 8.5 on Chinas seismic scale of 1 to 9.
NSC March 2008
Sustainability message loud and

clear at London exhibition
Recycling and sustainability were
the central themes at last months
Ecobuild/Futurebuild exhibition at
Londons Earls Court.
One of the most visible messages
was displayed by a large steel recycling counter on the Corus stand.
It was turned on at the three day
shows start, continually displaying
the amount of steel in tonnes that
had been recycled globally as the
show progressed. After 54 hours,
the final figure on the counter was
3,057,534 tonnes.
The stand also showcased the
many other benefits of steel in relation
to sustainability and modern methods.
Adjacent to the Corus stand, the
Steel Ideal stand included a full-size
ManuBuild prototype steel-framed,

pre-serviced module with demountable and moveable walls.
The stand also displayed winning
entries from two Living Steel International Design competitions.
A seminar on steel and sustainability was introduced by Corus
Construction Development Manager
John Dowling.
The seminar included a case
study of the large Pineham portal
framed warehouse in Northamptonshire presented by Rodney Rice,
Corus Product Development Manager and a summary of the ManuBuild
initiative by Architect Steve Thompson of Corus Construction Services
& Development.
Heathrow T5 ancillary
buildings completed
A Taylor Woodrow-led consortium, which included steelwork contractor Rowecord Engineering, has completed
three important ancillary buildings for BA Operations on
the new Terminal 5 campus at Heathrow Airport.
The three steel-framed buildings, split over two locations at the west and east ends of the T5 Development,
provide facilities for support services, tug charging, deicing and maintenance of aircraft.
To mirror the design code of the outlying buildings of
the main terminal, a signature sinusoidal cladding has
been used on all of the structures.
The Southern Airfield building is split over three floors
and encompasses office and staff areas. It will operate
24 hours a day, seven days a week, and is designed for
a shift capacity of 320 staff, totaling 960 people in any
24-hour period.
The De-icing facility is largely underground, housing
process plant and equipment, while the third structure,
the 8,100m2 Eastern Airfield building, is an operational
maintenance facility with a double height workshop and
staff areas.
Hotel and retail project will

rejuvenate Chelmsford town
centre
Steelwork erection has begun

on a mixed-use development
in Chelmsford which includes
an 81-bed Travelodge hotel,
12 residential apartments and
approximately 2,400m2 of retail and
restaurant space.
The project, on the site of the
former Army & Navy pub, features
a steel frame with a maximum
Corus Chief Executive Philippe

Varin (right) and General Manager,
Corus Construction Services &
Development Alan Todd under the
steel recycling counter.
four-storey height and a range

of architectural finishes to the
buildings facade, including curtain
walling, polished metal cladding and
brickwork.
Working on behalf of main
contractor ISG Jackson, DGT
Steel and Cladding is supplying
and erecting approximately 320t of
structural steelwork.
Mark Bird, DGT Technical

Manager, said the project posed
a number of challenging aspects
including the main retail areas
curved glass facade and the
diagonally sloping roof. As the roof
slopes diagonally from corner to
corner, not front to back, the purlins
are running at approximately 45
degrees to the cell-beam rafters.
This means every purlin to rafter
connection is bespoke.
The
perimeter
elevations
of the hotel include galvanised
feature channels which will be tied
into the brickwork, and required
an adjustment detail, utilising
interlocking serrated plates, to
ensure alignment with the brick
coursing, he added.
The project is scheduled for
completion by early 2009.
NEWS
Barrett Steel Buildings has announced a 10% business footprint

reduction and a manufacturing reduction of 7%, after measuring its
overall carbon footprints against its
figures for 2006.
In November 2006 we utilised the
expertise of SCI and carbon solutions
company dcarbon8 to establish our
carbon footprint for the first time,
explained Sue Sharples, Barrett Steel
Buildings Joint Managing Director.
Our main objectives were to
measure and then reduce our greenhouse gas emissions, and be able to
offer carbon neutral building products to our clients.

Barrett Steel Buildings successfully completed the calculations and
identified the main contributors to its
carbon footprint, and then set up internal forums to set about reducing
emissions.
The forums included evaluating
electricity and gas consumption,
looking at how the company sources, uses, and disposes of paper, and
reducing the amount of paint used in
its manufacturing process.
In late 2007, Barrett Steel Build-
ings measured its carbon footprint for a second time to see what
progress had been made. We are
delighted to say we have reduced
emissions across the board, said
Mrs Sharples.
The company is currently in discussions with its landlord to ensure
carbon emissions as well as cost
are considered in the choice of energy supplier. Other initiatives for the
coming year will include looking at
how employees commute, and a new
forum to look into more efficient steel
design and procurement.
Wakefield city centre to get a make-over

Steelwork has been completed for
the first phase of the Trinity Walk
redevelopment, a 200M project
which will transform Wakefield
city centre.
Biillington Structures erected
290t of steel for the new Market Hall during a four week programme. Due to the complex
nature of the design, the project
team had to incorporate 65 sloping columns and hidden fixings.
As well as the Market Hall,
the project also includes a large
shopping mall, leisure facilities,

residential blocks and a 957-space
car park. Main contractor is Shep-
herd Construction and the entire

project is due for completion by
May 2010.
Illustration: Hawkins Brown
Cube office for

Corby Council
Galliford Try has been awarded the
25.5M contract to build the Corby
Cube, a six-floor civic building
which will include council offices,
an auditorium, a library, restaurant
and terraced roof garden.
The steel framed and glass clad
structure will be a landmark for
the towns redevelopment and the
choice of materials and the buildings
shape reflect Corbys steel-making
heritage.
Architect for the project, Hawkins/
Brown, said the building will be
predominantly naturally ventilated
using exposed thermal mass for
night time cooling, and aims to meet
a BREEAM rating of Excellent.
Work on the project begins this
month and completion is due by the
middle of 2009.
The BCSA and The Welding &

Joining Society jointly held a
seminar at the National Motorcycle Museum on 5 February
entitled New Welding Coordination Requirements for Structural
Fabrication. More than 120 people attended the seminar which
was chaired by BCSA President
Richard Barrett. Key messages
of the seminar included: learning
about the new welding requirements and how to demonstrate
compliance; understanding the
roles and responsibilities of
welding coordination; learning
about the knowledge and competence requirements of the
Responsible Welding Coordinator (RWC), and how to achieve
recognition as a RWC.
NEWS IN BRIEF
Steelwork contractor
reduces carbon footprint
LaserTUBE Cutting has commissioned the worlds largest

tube laser, which is designed to
process medium and large tubes
up to 508mm x 16mm in finished
lengths up to 15m. It can also
process square and rectangular sections as well as ovals
on application. The company
has opened a new extension to
house the machine along with
all of its sawing and processing
equipment. LaserTUBE will be
holding a two day event - 22 and
23 April - to promote these developments. Invitations to this event
will be posted to BCSA members
and selected customers.
Architectural Profiles is now
offering its second generation
of the Strongbak structural wall
framing system. It consists of
structural panels inset between,
or to the faces of, the verticals
and horizontals of the frame.
Easi-edge has become the first
edge protection provider to
have been audited and joined
the Steel Construction Sustainability Charter. The company has
achieved Silver member status.
Following Giffords recent standardisation on CSCs Fastrak
software across the Group, the
Southampton office utilised
Building Designer to design the
new Hastings College Building.
The high level of automation provided by the software, gave significant time savings and commercial benefits on this prestigious, education-led project.
NSC March 2008
NEWS
Metals leader signs skills pledge

Metsec is the latest organisation to adopt the governments Skills
Pledge which aims to address the shortage of skilled workers by
investing in the development of employees skills.
Stephen Tilsley, Metsec Chief Executive, recently signed the
Skills Pledge certificate in the presence of Skills Minister David
Lammy MP and Lynn Tomkins, UK Director of Policy at Sector Skills
Council, Semta, when they met to discuss skills needs in the metals,
mechanical and electrical sector.
A huge shift in skills levels is vital if the UK is to compete with
other economies. Making the Pledge shows a companys readiness
to invest in people and work with employees, said Ms Tomkins.
An early signatory of the Pledge, Semta is currently negotiating
a sector agreement with the Learning and Skills Council which will
secure training funding for employers, and aims to increase the
number of companies adopting the Skills Pledge.
Mr Tilsley chairs the employer-led group which is driving the
development of Semtas Sector Skills Agreement (SSA) for the
Metals, Mechanical and Electrical (MME) sector, to be launched in
April.
One of the SSA priorities, which employers in the MME sector have
identified, is to increase the number and quality of apprenticeships.
While up-skilling the existing workforce to meet the skills
needs of the business is important, the value we derive from our
apprenticeships is immense, said Mr Tilsley. About 20% of our
current workforce has come through our apprenticeship scheme and
we aim to double this over the next 10 years.
Metsecs Stephen Tilsley (left) and Skills Minister, David Lammy MP.
New machines debut at UK exhibition

Kaltenbach will be demonstrating a number of
new machines and processes for the first time,
including what is said to be the worlds fastest
bandsaw, at the Mach 2008 exhibition, which is
held at the NEC from 21-25 April.
The companys showpiece line-up will
include the HBM440 ALU, which is the fastest
bandsaw ever developed and a machine
designed for automatic straight cutting of nonferrous materials. There will also be a mix of
Behringer straight and mitre cutting bandsaws
on display.
Diary
12 March 2008
Steel: The Show 2008
Thorpe Park, Leeds.
Free
9 April 2008
Sustainability Seminar
Hawthorden Lecture Theatre,
Edinburgh. Free
22 April 2008
Corrosion Control
of Steel Structures
Joint Seminar with Institute of Corrosion.
Oxford. 176.25 per delegate
10
NSC March 2008
Also on show will be the Intelligent

Blade Control (IBC), a fully integrated blade
management and control system that influences
cut accuracy and overall cycle times of straight
cutting bandsaws.
The KBS750DG/KDS615 sawing/multiaxis drilling, close coupled system will be
demonstrated on Kaltenbachs Stand 4750
located in Hall Four. The machine features the
latest solid carbide drills which cut five times
quicker than high speed steel, and three times
faster than tungsten carbide tipped units.
For all Corus events visit www.corusevents.com, email [email protected] telephone: 01724 405060
For all BCSA events email: [email protected] telephone: 020 7747 8122
23 April 2008
The Lowry, Manchester. Free
29 April 2008
CE Marking of Structural
Steelwork
National Motorcycle Museum,
Birmingham, 100 for members, 150
non-members
7 May 2008
Thinktank, Birmingham.
Free
21 May 2008
Responsible Welding
Coordinator Seminar
Boyne Valley Hotel &
Country Club
Drogheda, Republic of Ireland. 100 for
members, 150 non-members
22 May 2008
Cavendish Conference Centre,
London.
Free
The SCI provide a range

of in-house training
courses to both
Members and Non-Members of the SCI.
Courses can be customised to suit a
companys CPD objectives.
SCIs In-House training is a cost
effective approach to ensure your staff
receive the most relevant and up-todate training materials. For a list of all
in-house courses or to discuss your
requirements please contact, Sandi
Gentle T: 01344 636544 or email
[email protected]
CELLULAR BEAMS - MINIMISING RESOURCES, MAXIMISING BUILD ING EFFI C IENCY

Minimise raw materials
Maximise lifetime exibility
Visit www.westok.co.uk to request:
Cellular Beams use 25-50% less steel
The most important factor in the
than plain beams, minimising raw
longevity of multi-storey buildings is
material usage and transport loads.
the exibility of layout for future
Engineers Design Guide

CPD Seminar
Design Meeting
tenants. Cellular oor beams
* A designers guide to the benets of selecting a circular ductwork
system can be downloaded in a PDF format from Westoks website.

Type Lindab into the Search facility , click on Go, then click on the
rst link, Lindab - Ductwork Turns Full Circle to download the le.
Maximise structural efciency
produce column-free, long
Cellular Beams facilitate the use of
span oors at the same
circular ducting which is up to three
overall cost as the short
times more energy efcient than
spans of the 1980s. Todays
rectangular ducting. Download a PDF
clear span structures will not
from Westoks website for more details.*
be demolished due to lack of exibility.
CELLULAR BEAMS - EFFICIENCY AND ECONOMY
Westok Limited, Horbury Junction Industrial Estate, Horbury Junction, Wakeeld, West Yorkshire WF4 5ER
Tel: 01924 264121 Fax: 01924 280030 Email: [email protected]
www.westok.co.uk

NSC March 2008
11
Profile
Andrew Mannion says the BCSA will provide a huge boost to

the Irish steel construction sector.
The Irish
connection
Andrew Mannion, the first Chairman of the
BCSAs Republic of Ireland Region, tells
Martin Cooper how his engineering career,
along with the local construction industry,
has gone from strength to strength.
Croke Park
was the turning
point in AMSEs
history.
12
NSC March 2008
A Wednesday evening in February and the Dublin

football crowd is already streaming towards Croke
Park for the nights glamourous match against
Brazil. Since the completion of its redevelopment
this 85,000 seat stadium, which now towers above
all else in this inner city area, has become a city
landmark.
This project was the turning point in AMSEs
history, explains Andrew Mannion as he drives us
past the stadium. It was a major coup to get this
large prestigious job and it made people sit up and
take notice of us.
Andrew Mannion is proud and justifiably so
of the work AMSE successfully undertook on this
project, fabricating and erecting one of the largest
and most complex roof structures in Ireland with a
span reaching a mighty 44m.
Up to this point in the companys history it had
concentrated on small to mid-sized projects which
also contained a certain amount of complexity.
From this point forward the scale and focus of
the firm radically altered. Weve always prided
ourselves on our design expertise and our ability
to do complex projects, but we can now handle the
larger jobs as well.
Andrew is driving me through the evening rush
hour traffic taking me from our interview rendezvous, that afternoon at a city centre hotel, to a presentation at the Dublin Institute of Technology (DIT).
Once our interview had run its course he
suggested I attend the presentation and on the
way he would show me Croke Park. At the DIT he
presented a new steel beam testing device to the
colleges structural engineering department. The
machine can test steel members with loads of up
to 100t, the biggest piece of equipment of its kind
in Ireland, and was fabricated by AMSE and then
donated to the Institute.
Andrew graduated with a Diploma in Structural
Engineering from the DIT in 1978 and says the
donation is a good way of putting something back

and helping the future generation of Irish engineers.
The appeal of the structural engineering
profession in Ireland has steadily grown over the
last 20 years as increased construction activity
has driven demand for such expertise. When I
graduated there was no tradition of the engineering
profession in my family, nor indeed was
engineering as popular a career path as it is now.
The last fifteen years or so have seen the
emergence of the Celtic Tiger economical boom,
which has led to a huge upswing in construction
activity. The upturn is based on high-tech and
knowledge based industries with structural
engineering at the sharp end.
After graduation he started his working career
by spending three years at Collen Construction, in
a position with responsibility for design, in both
reinforced concrete and structural steel.
Becoming more interested in the design aspects
of steel construction, his next job - from 1981 to
1984 - at Patrick Kelly & Co. involved technical as
well as commercial duties. Working here I picked
up commercial skills which helped with setting up
and running AMSE later in my career.
Patrick Kelly was a subsidiary of Abbey plc and
in 1984 the UK-based company decided to divest
itself of all of its Irish assets. They put all of their
resources into housebuilding, which was good for
the South East of England, but not for me, he says
wryly. As I was left without a job.
Thoughts turned to emigration but he says
this ultimately wasnt an option for family reasons.
However, he swiftly found at new job with a small
engineering works based in Athlone, which is
pretty much slap bang in the middle of the island. A
location which has more than grown on him.
After gaining even more valuable experience
of all engineering functions including design and
execution, moving to Athlone also proved to be
Profile
There has never been so much steel

construction activity in Ireland.
rather fortuitous. In 1988 Andrew, purchased a

burnt-out factory in the town.
To cut a long story short Andrew went it alone
and started his own steel fabrication company. After
refurbishing the factory, installing equipment and
hiring staff, Andrew Mannion Engineering began
operations in 1988.
Andrew is Dublin born and bred but has now
lived and worked in the Athlone area for more than
20 years. It is a great location and being so central
means we are ideally placed to deliver steel and
work anywhere in Ireland, he explains.
From an early stage he says the company
wanted to offer the industry an alternative to large
steel construction companies. With my engineering
expertise we decided to go for the small difficult
jobs.
The 1980s had not been kind to the Irish steel
construction industry, and during the decades
recession many fabricators had gone bust. Andrew
Mannion Engineering entered the market just as
things started to look up. Again some fortuitous
timing was involved, but Andrew says he has simply
just taken opportunities as they have presented
themselves.
Nothing has been too pre-planned, Ive always
had broad and achievable career aspirations and
these have been achieved, he adds.
The companys phoenix-like rise from the factory
ashes was well timed and the firm grew generically
through the 1990s completing more than 1,300
projects, right across the board, by the end of the
decade.
Since completing the Croke Park project AMSE
has gone from strength to strength and Andrew says
its design department is unrivalled in Ireland.
As the firm was now at the forefront of the
Irish steel construction industry Andrews thoughts
turned to how he could improve the local sector. I
initially became aware of the BCSA by seeing and
using the NSSS Black Book.

He says the BCSA gives excellent technical
advice and assistance and joining could only help
the Irish construction market.
There has never been so much steel
construction activity in Ireland, weve experienced
10% to 15% growth per annum in the last 10 years,
says Andrew. This growth has been right across
the board and I encouraged other Irish steelwork
contractors to join the BCSA as a way of helping the
sector mature, because of all this activity.
A total of nine Irish steelwork contractors, which
represented the nations leading steel firms, were
initially offered a years BCSA trial membership.
Once this was completed the entire block joined to
form the Ireland Region.
Andrew concludes that through seminars and
publications more local consultants will be educated
and informed about the advantages of steel
construction. The parameters of cost compared to
concrete may be slightly different here from the UK,
but steel is still the right material for many many
projects.
Above left: AMSEs

completed steelwork at
Croke Park.
Above: Taoiseach Bertie
Ahern and Andrew
Mannion at the opening of
AMSEs production facility
extension.
Below: Andrew Mannion

surrounded by staff and
students of the DIT during
the presentation and
donation of a steel testing
machine.
NSC March 2008
13
Education
Leicester Grammar
School is moving out of
the city centre to a new
suburban location.
School for the future

The decision to use steel for a new school in Leicester allowed the construction team to meet
very tight deadlines, as well as lending an important degree of flexibility to the structures.
FACT FILE
Leicester Grammar
School
Main client:
Land Securities Trillium
Architect: Pick Everard
Structural engineer:
Pick Everard
Main contractor:
Norwest Holst
Caunton Engineering
Steel tonnage: 800t
The buildings
are sustainable,
affordable,
energy efficient,
ergonomic and
future-proof.
14
NSC March 2008
Leicester Grammar School is relocating from its

present city centre location to a new suburban
purpose-built premises at Great Glen.
Steelwork for the school has recently been
completed by Caunton Engineering and the
project is scheduled for completion in time for the
September autumn term.
The new school consists of three separate steel
framed buildings, a main teaching block, a sports
hall and a pavilion.
The two-storey teaching block will contain
a library, 14 science laboratories and a lecture
theatre, a music school and recital room, a drama
studio, an assembly hall to seat 900 people and a
refectory that will accommodate 450 diners. The
new premises will accommodate 1,250 pupils, and
includes a linked, but self-contained, junior school
complex which is relocating from nearby Evington.
Tony Goodman, Contracts Manager for Caunton
Engineering, says the interesting aspect of the
teaching block, as far as steel erection is concerned,
are the hubs or fingers which protrude from the
main structure. There are six of these in total, five
housing classrooms and one, the smallest, will be
used as an administration block.
Each looks very similar, but their pitched roofs
slope in different directions and internally they are
all structurally and architecturally different, he
says.
The complex nature of the structure, as well
as a very tight timescale, were the main reasons
for choosing steel as the framing material. Steel
allowed us to meet very tight project deadlines
for design and construction, crucially achieving a
watertight envelope in an advantageous time while
maintaining an acceptable economic balance,
explains Pick Everard Project Partner Duncan
Green.
Pick Everard has used steel on a number of
other school projects, and Mr Green adds: The
whole process with a steel frame was much, much
faster - from procurement, through to getting the

skeleton up and the roof on. It also provides a
degree of design flexibility, not available with other
materials, for future redevelopment.
A distinctive feature of the hubs is that each
has a different grid pattern to cater for their unique
classroom configuration and layout. All of the
hubs will house a different teaching faculty and
they each require a different number and size of
classroom.
The schools new sports hall contains a sixlane 25m-long swimming pool in one half of the
building, while the remainder of the structure
contains a gymnasium, a dance studio, six
badminton courts and changing rooms.
Over the swimming pool we had to erect
30m-long beams, the projects longest members,
to get the necessary clear spans, explains Mr
Goodman.
Meanwhile, the projects third structure is a
pavilion which contains changing rooms and an
upstairs club house and viewing platform. This
structure will serve sports taking place on the
adjacent 75-acre playing fields. This two-storey
building has a pitched roof and a balcony which
wraps-around three of the elevations. A row of
feature columns along the fourth elevation, which
also houses the pavilions entrance, provide an
architectural feature. These fabricated columns are
150mm x 150mm box sections.
The large playing fields include two floodlit
all-weather pitches, hard tennis/netball courts and
football and rugby pitches.
Pick Everard says its objectives were to
create buildings that inspire the users and blend
innovative design and practicality. The buildings
are sustainable, affordable, energy efficient,
ergonomic and are future-proof to take into account
safety and future needs.
We are delighted that the plans we developed
with Norwest Holst have come to fruition and
Education
Above: Caunton erected 800t of structural steel during a

three month programme.
Below: A steel frame was chosen for its

time and flexibility advantages.
that they satisfy both the planning needs and the

educational requirements of the school, adds Mr
Green.
Land Securities Trillium (part of the Land
Securities Group) has provided the funding for the
purchase of land and construction of the school.
The new premises will be owned by Land Securities
Trillium and leased to the school over a 35-year
period.
Christopher King, Headmaster & Chief
Executive of Leicester Grammar School, comments:
The school is excited at the prospect of its long
term association with Land Securities Trillium. This
partnership opened up an imaginative means of
financing the schools development to the benefit of
existing and future staff and pupils.
Once the new school is open, Land Securities
will work with Leicester Grammar School to
maximise the value of existing sites.
Also commenting on the funding of the project
Ian Ellis, Chief Executive of Land Securities Trillium,
said: We are always looking to become involved
in more socially responsible projects where we can
use our skills and financial strength to benefit the
community.
Below: The sports hall contains a 25m-long swimming pool.
NSC March 2008
15
Retail
Creating a retail destination

Steelworks flexibility has come to the fore on a new retail development in Livingston
town centre. Martin Cooper reports.
The growth in large retail developments, right
across the UK, shows no sign of slowing down
and one of the largest on-going schemes is The
Elements, a 90M extension to the Almondvale
Shopping Centre in Livingston, West Lothian.
The project will provide more than 34,000m2 of
new shopping space including 30 new shops and
two anchor department stores, 2,322m2 of leisure
space and a winter garden.
The existing Almondvale Centre was built in
two main phases, during the 1970s and 80s, and
contains around 120 shops, most of which are well
known high street retailers. It also includes one of
the UKs largest superstores, an ASDA, which is
located at the east end of the mall.
However, according to the projects developers,
the towns shopping population has grown by 70%
since 1998 to around 150,000, and is predicted to
increase further during the next few years.
Livingstons core catchment area is centred on
West Lothian, which has the youngest population
and the highest projected population growth of
any local authority area in Scotland. The town is
also ideally placed to attract shoppers from both
Edinburgh and Glasgow.
Consequently the retail expansion is regarded as
a necessary step and forms an integral element of a
much larger development of Livingstons town cen16
NSC March 2008
tre, which also includes a new multi-storey car park.

Construction work for The Elements is taking
place on the site of a former Safeway store and its
adjoining carparks. Once the project is completed
Livingston will have one of Europes largest indoor
shopping complexes with more than 92,000m2 of
retail space.
Main contractor Miller Construction started work
on site early in 2007, and began by demolishing the
existing structures and clearing the site. Steelwork
contractor Severfield-Reeve was then able to begin
its programme in March, erecting approximately
4,000t of steel by the end of 2007.
The project features four malls which all
converge at a central plaza, which will contain a
large open public space and an array of restaurants
overlooked by a rooftop level winter garden. Each
mall will have two trading levels, a ground floor and
a mezzanine level within the retail blocks. All of the
malls will be covered by a transparent ETFE roof,
which will allow natural daylight to penetrate into
the shopping areas.
Martyn Wakefield, Site Construction Manager
for Severfield-Reeve, says that one of the most
challenging aspects of the project is the fact that
there are six individual steel-framed structures
which form the retail development.
Each of the blocks are structurally independent
Top: Once complete The

Elements, combined with
the existing Almondvale
Centre, will create one of
Europes largest indoor
shopping malls.
Retail
FACT FILE
The Elements shopping mall,
Livingston
Main client: Land Securities
Architect: BDP
Structural engineer: Arup
Main contractor:
Miller Construction
Severfield-Reeve
Project value: 130M
Above: Covered by an
ETFE roof, the mall will
have two trading levels.
Top right: Bisecting the
project (left to right) a
covered pedestrian walkway is located within two
malls and connects two
existing centres.
and so they were all individually erected, he says.

In many other similar malls the entire structure
would be just one building.
There is very little connection between the
blocks apart from at roof level where steel trusses
span the malls to support the ETFE grid roof
structure. Each steel framed building has its own
tolerances and setting out had to be exact to take
into account the roof which sits on steel plates
above each block.
By incorporating six blocks the design will
break-up an otherwise
A temporary
regimented streetscape, as
each block will be clad with
covered
a different combination
pedestrian
of cladding, adds Allan
Arups Project
walkway bisects Driscoll,
Engineer.
the construction Where the four malls
converge they form a cross
site, effectively
and in each corner, abutting
two malls, there is one of
cutting it into
four steel framed blocks
two seperate
(B, C, D and E). One of the
malls leads directly into the
entities.
existing Almondvale centre,
while another leads directly to a new entrance
foyer. The other two malls lead directly into anchor
department stores (Blocks A and F).
All of the steel framed blocks are two-storey
high, including the Debenhams (Block A) anchor
store, with the exception being Marks & Spencer
(Block F) which has three levels.
Marks & Spencer were not the original tenant of
Block F and once they were lined up for the tenancy
the design was changed at their behest. This block
was the most time-consuming for steel erection,
explains Mr Wakefield. We already had most of the
steel for this anchor store erected when the design
was altered. We had to do a lot of variation work
including adding an extra floor.
Steelworks inherent flexibility came to the fore
during the alteration work as a number of columns
had to be moved to allow for new voids to be
created as lifts and stairwells were repositioned.

By using steel we designed a fair amount of
flexibility into the structures, adds Mr Driscoll. We
also wanted to make allowance for possible changes
in tenant requirements and this made the alteration
work a lot easier.
Alteration work aside, Severfield-Reeves steel
erection work went smoothly. It is predominantly
stick and beam construction on a 7.5m x 7.5m grid,
with a slightly larger grid pattern for the two anchor
stores.
Stability is provided for all of the structures by
concrete cores, with two or three in each block.
This was the best option as there is no room because of the glazed shopfronts - for any perimeter
cross-bracing, explains Mr Driscoll. So all
steelwork is tied back to the reinforced cores.
Service yards for The Elements are located
beneath Blocks A and F, and large 19t plate girders
were needed to support the shop floors. These
were the largest steel members we had to erect,
says Mr Wakefield, before explaining that there was
one other aspect of the project which was unique
and impacted on all construction work.
Because of the projects location, midway
between the existing shopping centre and a
designer outlet, a temporary covered pedestrian
walkway, positioned in two of the malls, bisects the
construction site. This allows shoppers free access
between the two existing malls during construction
work and effectively cuts the site into two separate
entities.
This meant all deliveries had to be planned and
sent to the correct half of the site, and SeverfieldReeve had two separate workforces. As the walkway
had no protective crash deck, no materials, including
steel, could be lifted over it and all erection was
done in such a way as to avoid going over or near
the walkway.
Taking everything into consideration, such as
a tight timescale and accommodating all of the
variation work, the team members all agree the
project has gone extremely well and The Elements
is due to open on time this November.

NSC March 2008
17
Civic
Steel writes a new

chapter for Tyneside
Newcastles new City Library incorporates a complex steel and glass design and
is set to be a stand-out civic building when it opens in Summer 2009.
Traditionally, public libraries do not advertise
themselves; they tend to be functional buildings
that appear to be quietly getting on with the serious
business of educating and improving the lives of
people who use their facilities, rather than bold
statements of architectural design.
That all changed with the opening in 2000 of
the Alsop & Stormer-designed Peckham Library in
South London, which has won countless design
awards and features a striking exterior that makes
its presence very much felt in the local community.
Now, Newcastle City Council is following suit, with
the construction of a new library in the city centre
that is sure to catch the eye.

The new Newcastle City Library is being built as
part of a 40.2 million PFI initiative between the
local authority and a consortium led by Kajima
Partnerships, the developer and sponsor, in what
is the largest library PFI undertaken in the UK to
date. It is currently under construction on the site
of Newcastles old library itself designed by iconic
architect Sir Basil Spence and is due to open in
Summer 2009.
Architect Ryder has come up with a design that
announces itself in bold terms, meeting the clients
desire for a high quality civic building that will
Above: The steel frame

accommodates a traditional layout as well as the
open atrium.
FACT FILE
Newcastle-upon-Tyne
City Library
Main client: Newcastle
City Council
Architect: Ryder
Mott MacDonald
Main contractor: Tolent
PFI concessionaire:
Kajima Consortium
Conder Structures
Steel tonnage: 900t
Project value: 40.2M
The glass box frontage

as visualised by the
architectural model.
18
NSC March 2008
Civic
Far left: The largest beams

span the atrium and performance space.
Left: The new library is set
to be a landmark in the city
centre.
attract both new and existing library users.

We wanted the City Library to be a symbol of
creative design and a model for 21st century library
facilities, explains Ian Kennedy, Ryder Architectural
Director. It will be an inspirational place, with
spaces for reading, learning, research, relaxing,
meeting and working.
One of the most striking features of the new
building is the glazed grid on John Dobson Street
which returns on to New Bridge Street at the front
of the building, giving passers-by the impression
of a large open library bookcase. Behind this box
is a four storey, 23m x 15m atrium that will fill
the library with light. Artist Kathryn Hodgkinson
has created an etched design that runs across
the entire area of the glazing on the John Dobson
Street elevation, inspired by interviews with 2,000
Newcastle residents about their hopes and dreams
for the city.
Internally, the glass box and atrium account for
about one third of the space, with the remainder of
the six storey building designed to the standard of
a modern office development, with raised access
floors, to give it as much flexibility as possible for
use of the space. While this enables much of the
structure to be built on a regular grid measuring
7.2m x 9m there are exceptions, for example to
accommodate a 180-seat performance space on the
third floor.
Initially the structure was designed as a concrete
frame, but it has since been re-engineered in steel
to reduce costs. The steel frame has been designed
around the architectural constraints, so there are
a lot of rolled hollow sections, explains Gerry
Gray, Project Engineer at structural designer Mott
MacDonald.
For the areas that will contain offices and book
collections, the frame is being constructed using
533 x 210 x 82 main beams with 406 x 178 x 54
secondary beams. Columns vary in height and
size, with the largest - adjacent to the librarys main
walkways and brise soleil being 406mm diameter
hollow sections constructed in a single 25.8m
length.
Three transfer beams at high level enable the
loads to be carried above the larger spans of the
atrium and the performance space. All three are
formed using plate girders, with two measuring
14.4m in length x 1,250mm in depth. The third also
spans 14.4m, but is 2m in depth, has 45mm thick
flanges and web, and weighs 17t. The largest
transfer beam is positioned at roof level and has
five floors suspended below, explains Mr Gray.
The glass box, which runs the whole length

of the John Dobson Street elevation, is principally
separate from the main structure. It sits on 6m long
762 x 267 x 147 beams with short ties back to the
main structure. The supporting columns are CHS
457mm diameter, reducing to 355mm at the top to
create an architectural feature.
Inside the box all the steelwork is exposed, and
consists of 300 x 200 x 12.5 RHS beams and 250 x
250 x 8 SHS columns. Because they are on display,
the connections between these beams and columns
are an important element in the architectural
expression of this area of the building. Detailing
these connections was the job of the projects
steelwork contractor Conder Structures.
The main criteria was the requirement that no
bolts would be showing, so that the entire structure
of the glass box appears to be of continuous
steelwork, explains Conders Managing Director
Jason Hensman.
The company developed two prototypes for the
client to choose from, the winning design involving
the welding of hollow 300 x 200 x 16 RHS brackets
with their own 6-hole end plates that matched the
beam ends. Access hatches measuring 120mm
x 120mm were cut into both the beams and the
columns so that the erection teams could fix the
bolts between the two. These hatches are closed
with 3mm thick 200mm x 170mm cover plates so
that the bolts are not visible, and the steelwork
appears to be continuous.
Conder which is working for main contractor
Tolent began design and fabrication of the
Newcastle City Library frame in July 2007, and has
just completed erection of all 900t of steelwork.
To catch up on time lost due to high winds in
December, the erection team worked over the
Christmas holiday period.
The job has gone extremely well with the
exception of the weather, says Mr Hensman.
However, we have worked extremely closely with
the main contractor, Tolent; we used mobile cranes
to accelerate the programme in a number of areas,
which has limited the delays caused by high winds.
The entire project is due to be completed in
Summer 2009. Its facilities will include a crche,
caf, internet access, dedicated areas for children
and meeting rooms for community groups.
Among the items on display will be the collection
of 18th century engraver Thomas Bewick and the
Thomlinson Library, whose 17th and 18th century
collection of books formed the core of Newcastles
first public library.

The steel
frame has been
designed around
the architectural
constraints, so
there are a lot
of rolled hollow
sections.
NSC March 2008
19
The case for steel
The safety
solution
In the second part of our Case for Steel series Nick Barrett
explains why steel construction is the safety solution.
Inherently easy site erection is one reason why steel
construction sites are safer places to work.
The accuracy of steel means fewer

erectors are needed on-site.
Designers putting safety first need to consider

whether a project can be safely executed, and since
constructional steel is inherently safer than other
framing materials steel is increasingly the solution
of choice.
Steel is safer for a wide range of reasons.
Starting with the design process, in-house design
teams at steelwork contractors will share their
special knowledge of steel structures by working
with structural engineers and architects to develop
steel framed solutions that enhance a projects
safety case.
Steelwork is an off-site manufactured, preengineered quality assured product that arrives
on site when it is needed, ready for erection.
Pre-planning of on-site operations is much easier
with steel. The accuracy of the fabricated product
delivered to site means that errors that could
generate site
Steel components can
hazards are
minimised.
be pre-assembled or

This accuracy
fabricated into modules is achieved by the
either off-site or at low widespread use
of sophisticated
level, which reduces
software driven
many potential hazards. computer
numerically
controlled fabrication equipment. 3D models of steel
frames are routinely created, helping with detailed
planning of erection procedures. Planning is further
aided when unorthodox or complex fabrications
are involved by trial erections before delivering to
site. Risk can be removed from site activity by this
process.
The accuracy of modern steelwork makes
possible high levels of productivity on site, without
the sort of undue rush that can give rise to unsafe
behaviour. The shorter and more predictable
construction programme advantages of using
steel in fact take pressure off other site activities,
helping them to be executed more safely as well.
The accuracy of steel has almost totally eliminated
the need for re-work, and means fewer erectors are
needed on site. Far less temporary works is needed
than with other framing systems.
Weather causes relatively few problems for
steelwork as much of the work has already been
carried out in the dry conditions of the fabricators
workshop. Steel components can be pre-assembled
or fabricated into modules either off-site or at low
level, which reduces many potential hazards.
Steel construction the qualified industry

Steel construction is carried out by specialist site erection teams who hold recognised qualifications under several safety related schemes:
An accredited qualification, Constructional Steelwork NVQ level 2, is available to steel erectors, metal deck installers and studwelders.
The Register of Qualified Steelwork Contractors (RQSC) classifies all participating firms according to the type of work they are competent to
undertake and the size of contract that they can resource and manage.
The Safe Site Handover Certificate identifies key site conditions to be checked before erection starts in order to minimise site risks.
The UKAS accredited Steel Construction Certification Scheme offers a Health and Safety Certification service, which is an audit certification to
OHSAS 18001 specifically designed for steel construction.
The Safety in Steel Construction service provides the competent person requirement of the management of Health and Safety Regulations, as well as
a helpline and inspection services.
20
NSC March 2008
The case for steel
Greater certainty of safe site practice is achieved

because steelwork is standardised in a way that
lends itself to repetition of site tasks. Steelwork
contractors are specialists with highly trained
and experienced skills in design, fabrication
and erection. The site erection teams are highly
specialised and skilled, and hold recognised
qualifications (see box on opposite page).
Erection programmes for steel frames are short,
involving relatively few on-site personnel and so
less exposure to potential hazards. A typical steel
erection team would comprise four or five trained,
competent erectors - as opposed to as many as 20
for an equivalent in-situ concrete frame.
Steel frames can be self stable so the full
strength of the material can be immediately
available. There is no delay while the steel gains
strength and no risk of placing reliance on an
under-strength component. Already erected parts
of the structure provide safe access to working
positions, for use by other trades if required.
Decking for composite slabs provides a safe
platform after installation as well as protection to
lower storeys, and access stairs can be immediately
supported from columns and beams as required.
At the end of a steel framed buildings useful life
it is easily and safely demountable, the sections
being either re-used elsewhere or recycled to
provide steel of the original quality.
The steel construction sector provides an
extensive range of free advice and Health and
Safety Guidance covering design and workshop
practice. BCSA publishes an extensive range of
Codes of Practice for the erection of:
Low Rise Buildings
Multi-storey Buildings
Metal Decking & Stud Welding
Steel Bridges
Steelwork in Windy Conditions
Work at Height during Loading and Unloading
and also Health & Safety Guides covering:
On site
In the workshop
In the office
For Managers & Supervisors
For further information please visit:
www.SteelConstruction.org
High level steelwork can be assembled at ground level

and then lifted into place, minimising work at height.
Health and Safety benefits of steel

Using steel reduces site based activity
Less on-site congestion due to fewer site personnel
Off-site fabrication eliminates many on-site activities and so reduces potential hazards
Reduces exposure to bad weather conditions
There is virtually no steel waste arising on site, so no hazard generating on-site stores
are needed, and there are fewer vehicle movements involved in handling waste
Fewer delivery movements to site also reduces hazards
Steel is not a hazardous material for workforces to handle
There is no use by date on steel as there is with concrete
Edge protection erected along with the steel

frame provides a safe working environment.
Safety innovations
A range of safety related innovations have been pioneered by steelwork contractors and are in common use
on sites.
Dedicated lifting points and lifting brackets are fabricated into steelwork
Support frames that allow mobile elevating working platforms (MEWPs) to be used on erected steelwork
Edge protection systems can be attached to sections before erection
The use of nets to protect following trades is widespread
Composite floor decking can be cut off-site
Bridge sections are now being sub assembled to include the access systems, significantly reducing work
at height risks
NSC March 2008
21
Government
Super green
building
Vulcan House is one of the UKs greenest
buildings. The Home Offices new Sheffield
headquarters has also received the citys first
Excellent Rating in a BREEAM award.
FACT FILE
Vulcan House, Sheffield
Main client:
Home Office Property
General project consultant
and advisor: Mott MacDonald
Architect: Hadfield
Cawkwell Davidson
White Young Green
Main contractor:
Wilson Bowden Developments
22
NSC March 2008
Government
Above: A steel frame was

chosen for its speed of
construction.
Right: Feature architectural
elements adorn most facades.
Below: One elevation has
a large weathering steel
facade.
Left: The building is cubeshaped as this offers the best
way of regulating its internal
climate.
Appearances can sometimes deceive as Vulcan

House is an attractive, though not a spectacular
addition to Sheffield city centre. However, what
makes this building special is mostly on the inside
as every detail has been fine tuned to deliver
optimum environmental performance.
The building is rated as one of the countrys
greenest ever structures and was awarded
Building Research Establishments environmental
assessment method (BREEAM) Excellent Status in
May 2006. At this time there were only 560 office
blocks in the UK that had attained a BREEAM rating
of any kind.
Vulcan House is a test bed for the Home Office,
which has set out to minimise its ecological
footprint, measuring CO2 emissions through
construction, operation and, eventually, demolition.
It has also become a benchmark for future
government construction projects because of its
outstanding green credentials.
There are around 2,000 Home Office staff based
in Sheffield, scattered across five sites. The Home
Office wanted to centralise
Every detail has its operations in a brand
been fine tuned new, purpose-built headquarters. And it wanted not
to deliver
just to meet but exceed the
governments own environoptimum
mental targets. Government
environmental
has committed to becoming
carbon neutral by 2012.
performance.

But it did not want to
become an owner occupier and instead it chose to
ask speculative developers to bid for the project.
Construction of Vulcan House was ultimately
awarded to speculative developer and contractor
Wilson Bowden.
This is a key point, says Mott MacDonald
Technical Director Eddie Murphy. Weve achieved
the BREEAM rating and shown that sustainability
can be incorporated in a speculative project, a sector
which is traditionally only interested in cost.
Mott MacDonald drew up a competition brief
for construction of the green office building along
with project manager and architectural consultants
Drivers Jonas.
BREEAM ratings are won or lost in the first 10%
of the design phase, says Mr Murphy. We asked
bidders to look at integrating building services with
the fabric, he adds. Its not enough to put up a
building and slot services in afterwards. You have to
treat the building as a whole from the moment you
start.
The reasoning being that if you have a building
that is well insulated, protected from solar gain and
airtight, you create an internal environment thats
much more stable and passive.
Vulcan Houses shape was then dictated by the
desire to put 10,000m2 of work station space, a
515m2 public area, training facilities, toilets, tearooms, kitchens and a restaurant, arranged over seven floors, into as efficient an envelope as possible.
A cube offers the best external area per
internal square meterage in terms of regulating
the buildings climate, adds Murphy. The block is

NSC March 2008
23
Government
punctured by a central light well and this allows lots

of daylight into the building. Floor to ceiling height
was set at a relatively high 2.9m to aid daylight
distribution across the floors. A natural green sedum
roof keeps heat in and also minimises rain run-off.
We asked bidders to create virtual thermal
models of their design and subject it to a years
worth of local weather data. By changing the
orientation of the building we found we could save
5% energy, explains Mr Murphy.
Structurally the building is fairly standard with a
steel frame built on CFA piles with composite floors
composed of 150mm concrete over metal decking.
Steel was used for speed of construction - the
frame went up in 12 weeks, comments Wilson
Bowden Developments Senior Construction
Manager David Wragg. It makes the building
lightweight, though there is still enough thermal
mass to help stabilise the buildings temperature.
Along with concrete construction comes a
multitude of other materials, such as formwork, and
space was also at a premium at Vulcan House. Steel
was brought to site in 20t loads and immediately
erected that day, adds Mr Wragg.
Steelwork contractor Robinson Construction
erected more than 980t of structural steel during
their brief programme. Cellular beams were used
throughout to minimise the structural void and give
the building its maximum possible floor to ceiling
heights.
The cellular beams span up to 15m in places,
and by keeping all services within their depth the
beams allowed for column free zones between
the structures perimeter facade and the internal
lightwell.
By using long span steel beams the building can
change configuration in the future, comments Mr
Murphy. Bearing in mind its a speculative building,
24
NSC March 2008
the Home Office could end its tenancy in 15 years

time and then the building could be easily divided
into a multi-tenant office block.
Externally there are no sunscreens or thermal
buffers to suggest Vulcan House is environmentally
honed. But it is wrapped in argon-filled double
glazing to minimise heat transfer through radiation.
Solar protective glass is designed to allow through
light but prevent heat gain. Insulated ceramic panels
minimise thermal loss or gain on non-glazed areas.
At first glance the building services are nothing
to get excited about, adds Mr Murphy. The
building isnt even
By using long span
naturally ventilated.

This makes
steel beams the
the buildings
building can change achievement of a
BREEAM Excellent
configuration in the rating all the more
remarkable. The speed
future.
of computer modelling
and analysis has offered previously unheard of
freedom to manipulate the buildings elevations
and interior spaces to balance services with the
environmental demands placed on them.
The relationships between different spaces within
the building have been modelled, which means the
completed structure does not have a small room
requiring heating while the rest of the building needs
cooling.
Local ventilation combined with heat reclaim
systems, in which warmth from extracted air is
used to heat cool incoming air, enhance energy
reductions. Power savings are improved further by
circulating air locally rather than ducting it over large
distances.
Heating and cooling plant specification has
also been closely scrutinised. There are no
Government
Above: Steel has helped

maximise floor to ceiling
heights.
Below: The building is
wrapped in argon filled
double glazing.
Left: Incoming air is heated to
aid energy reduction.
hydrofluorocarbons (HFCs) in the chillers, says

Mr Murphy. HFCs are used as a refrigerant, and
largely replaced chlorofluorocarbons (CFCs) in air
conditioning plant because of the huge damage they
do to the ozone layer.
A typical office air conditioning system will have
upwards of 30kg of HFC refrigerant in it, which
leaks out and has to be topped up regularly. In
Vulcan House ammonia chillers have been installed.
Ammonia is completely benign to the atmosphere
in its effect on global warming, and it is also a better
refrigerant. It is lighter than HFCs, so it is easier to
pump around the system, which means it is using
less energy in operation.
To further emphasise the projects construction
green credentials, Wilson Bowden has chased down
the global warming impact of the scheme through
every part of the process. Every material used on
site has been checked to make sure that it is free of
HFCs, CFCs or hydrochlorofluorocarbons. All subcontractors have also been checked to make sure
they are using approved materials.
Now that construction is nearing completion and
the Home Office to preparing to set up residence
in its new headquarters, it is engaged in a hearts
and mind campaign. The biggest threat to Vulcan
Houses in-use environmental performance comes
from the behaviour of the occupants.

All Home Office staff are being given simple
user manuals and guided tours before they move
into their new workplace. The reasoning being that
understanding the design principles will help them
conserve energy.
It will begin moving staff into Vulcan House
during March and then a slightly smaller adjacent
block, also speculatively built by Wilson Bowden
will come on-line in May, with full occupancy of both
buildings expected by July.
Built along similar lines as Vulcan House, but
without the column-free floors, the smaller block will
be linked to its larger neighbour via a steel bridge.
Meanwhile, the Home Office is screening
prospective facilities managers. A thorough grasp
of the buildings design will be required; low
energy and environmentally benign work methods
and maintenance/repair products will have to be
demonstrated.
Another part of its CO2 reduction strategy hinges
on cutting the number of journeys made by car.
Centralising all its staff in a single building will
eliminate local work-related travel. However, it wants
to take this further, by restricting the number of
available car parking spaces to encourage staff to
leave their vehicles at home.
NSC March 2008
25
Bridges
Bridges will keep

the traffic flowing
The Apleyhead junction bridge was the first to be completed.
An innovative approach is being used to construct and erect bridges across the A1 between
Peterborough and Blyth, where six roundabouts are being replaced with two-level junctions
to ease congestion and delays. Martin Cooper reports.
Below: SPMTs transported the steel bridge

deck at Blyth 200m from
its assembly point to its
final position.
26
The A1 is a north-south trunk route of strategic

importance and in some ways iconic, as it is one
of the UKs longest highways. Linking London with
Edinburgh via the East Midlands and the North East
of England, the route is for much of its length a
motorway - A1(M) - grade highway.
However, one of the longer stretches of dual
carriageway, linking the two A1(M) sections
at Peterborough in the south and Blyth in the
north is currently being upgraded. According to
NSC March 2008
the Highways Agency, this 110km-long section,

although of satisfactory standard, suffers from
severe localised congestion at six roundabouts, so
they are now being replaced with grade separated
junctions incorporating steel bridges.
There is quite often a lot of queuing and
delays on this stretch and the works will alleviate
this by allowing motorists on the A1 a clear run
without roundabouts, explains Dave Abraham,
Construction Manager for main contractor
Interserve.
The most northerly junction of the scheme is the
Blyth A1/A614 interchange near Retford. Here, as
with all the other five junctions, a new steel 30m-
Bridges
FACT FILE
A1 Peterborough to
Blyth upgrade
Main client:
HIghways Agency
Atkins
Main contractor:
Interserve
Fairfield-Mabey
Steel tonnage: 900t
Project value: 83M
Above right: Multi-axle SPMTs

lifted, carried and jacked the
completed steel bridge into
position.
The Markham Moor bridge

is being constructed on a
busy roundabout with heavy
traffic circulating around it
continuously.
long bridge is being constructed over the existing

A1 with new roundabouts either side.
Interestingly at this location an innovative and
time-saving procedure has been used for bridge
construction. In order to reduce disruption and
speed up the works process, the new bridge was
fabricated on an adjacent site, at the same time as
the abutments were being built. Once both were
finished the bridge deck was transported as one
large structure, over a distance of 200m, and jacked
into its final position.
While the bridge abutments were being readied,
steelwork
The new bridge was
contractor
Fairfield-Mabey
fabricated on an
was busy
adjacent site at the same assembling the
bridge steelwork
time as the abutments
on a temporary
were being built.
platform to the
side of the new bridge position. The composite steel
and concrete deck consists of six longitudinal steel
beams, each 1.2m-deep arranged in three braced
pairs forming a 30m-long, 13.5m wide structure. It
was assembled 1m above grade and this also had
the benefit of minimising working at height.
Once the entire bridge deck was assembled,
along with the concrete decking and edge
protection, the lifting, jacking and transportation
process was undertaken to transfer the structure to
its final position.
Luckily there was enough space close to the
bridge to construct the deck, comments Richard
Selby, Project Manager for Fairfield-Mabey.
Interserve didnt want to transport it too far in
order to minimise time and any potential damage to
the bridge.
Interserve employed heavy lifting specialist
Mammoet to carry out this procedure. This
technique is rarely used with a steel bridge deck
in the UK, but Interserve reckons it reduced the
construction programme at Blyth by approximately
two months.
The fully assembled deck weighed 550t and to
move this huge section into place Mammoet used
its self-propelled modular transporters (SPMTs).
These remote controlled multi-axle units transported
the deck, over the recently levelled ground, to
its final position were it was then jacked up and
lowered on to the abutments.
In the end the whole transportation and jacking
process was completed in one night time operation.
The whole process went very well, comments Mr
Abraham. So well in fact that a similar operation
will be carried out at the Colsterworth A1/A151 and
Carpenters Lodge A1/B1081 junctions in April.
These two junctions are the most southerly in
the scheme and again involve new steel bridges to

replace at grade roundabouts. In fact Colsterworth
will require two steel bridges, one for the junction
and another which will replace a troublesome A1
cross-over.
Using steel for the new bridges has brought
a number of benefits to the project according to
Interserve. We have saved time by using near-site
fabrication and steel certainly lends itself to this kind
of construction, says Mr Abraham. Plus, for these
30m span structures steel is a more economical
material.
The other three steel bridges on the A1 project
are being erected in a more traditional manner.
Directly south of Blyth, the Apleyhead A1/A614/A57
bridge has been completed and open to traffic since
October 2007.
At this junction a new dual carriageway for
the A1 was constructed in fields to the east of the
existing A1. New southbound on and off slip roads
were built, and the new bridge connects the existing
roundabout with a new western roundabout,
completing a new dumb-bell shaped junction.
As the new bridge was constructed over a new
road, traffic disruption wasnt an issue, but all bridge
beams were still delivered to site by Fairfield-Mabey
at night, to minimise congestion.
Likewise, the works at the Gonerby Moor A1/
B1174 junction, which includes site clearance, topsoil stripping, bulk earthworks and bridge construction, have also had limited impact on the existing A1
as the majority of work has been carried out off-line.
Markham Moor, the A1/A57 junction, has proven
to be the most complex. The new steel bridge has
been constructed in the middle of the existing
roundabout, with live traffic circulating around it
both day and night.
Once complete the new A1 will run right through
the Markham Moor roundabout with new junctions
either side of a new over bridge. After the bridge
abutments were constructed Fairfield-Mabey
brought the steelwork to site and erected braced
beams in pairs.
Its the location which makes this bridge so complex, says Mr Abrahams. Getting the equipment
and materials to site has been challenging.
But if the bridge was built with concrete we
would have had twice as much traffic and materials
going to site, adding to an already busy and at times
congested junction.
Keeping disruption to a minimum during the
works, with the least amount of closures and contraflows, is key to the whole scheme. Using steel and
utilising the SMPTs has ensured weve met this
target, sums up Mr Abraham.
All six junctions are scheduled to be completed
by October 2008.

NSC March 2008
27
Museum
Tanks roll
in to world
class home
The roof is extremely

complicated and
required a lot of bolted
connections to take
into account all of the
slopes.
Part of a 16M Heritage Lottery Fund

sponsored project, the worlds largest tank
collection will soon be housed in a new steel
framed hall replete with improved display
areas, new amenities and most importantly,
much more space.
FACT FILE
The Tank Museum,
Bovington, Dorset
Main client:
The Tank Museum
Project manager:
Drivers Jonas
Project quantity
surveyor:
Turner & Townsend
Main contractor:
Norwest Holst
AKS Ward
Architect:
Kennedy OCallaghan
Bourne Special
Projects
Steel tonnage: 350t
Project value: 10.5M
28
NSC March 2008
The new structure radiates out

from the viewing tower.
Located at Bovington in Dorset, on a site

acknowledged as the home of armoured warfare
- as the Royal Armoured Corps (the first corps to
deploy tanks in battle) still reside there - the Tank
Museum has the worlds most historically significant
collection of tanks.
More than 250 military vehicles, some dating
back to before WW1, can be seen at the museum
and more than 100,000 visitors per year flock to the
site.
Known as AT Close Quarters, the redevelopment
project aims to provide the collection with more
space and allow each exhibit to be placed alongside
supporting collections and archive material.
The project is also designed to improve access
to the exhibits and to provide a better visitor
experience. The major part of the development is
the 14,500m2 Display Hall. A number of options were
investigated by the design team for the location of
this building, with the final position being in the
south west corner of the site which is bounded by a
sweeping road following the site boundary.
This allowed best use to be made of available
space and offered greatest flexibility for potential
future development. It did however require that
the building occupy a distinctive quadrant shape.
This was turned to best effect by architect Kennedy
OCallaghan who located the central hub of the
structure which houses the cafe, shop, entrance
and administration offices, to give access to both
new buildings and existing buildings as well as the
external display area.
A 20m-high tower structure is located at the
centre of this hub and will be a landmark as well as
a structural focal point for the entire project. The
display hall in fact radiates and fans-out from the
tower.
AKS Ward Project Director, David Perkins, said:
We have worked on this project for over five years
and have seen it through a number of different
forms before settling on the current structure which
meets all of the clients aspirations.
The roof of the display hall is configured by a
Museum
series of trusses, eight in total, which span 36m and

radiate from the tower providing a large columnfree area. These tapered trusses have a maximum
depth of 5.1m, weigh approximately 2.5t each and
are supported on a row of 406mm diameter CHS
columns at their outer end and 323mm members at
the support closest to the tower.
Truss centres vary from 4.2m at their closest
to 10.4m at their widest. Stability of the roof and
trusses is provided by the rafters which are arranged
diagonally to perform the dual function of vertical
support member and brace, giving the most efficient
use of steelwork.
From the outer row of CHS columns there is
then another 14m span to the perimeter columns,
and this extra bay is covered by a mono-pitched roof
which is then connected back to the display hall roof
structure.
A north light roof was designed for the hall
to allow natural daylight to easily penetrate the
display area below, explains Ivor Robinson,
Contracts Manager for Bourne Special Projects
(BSP). However, with the roof being radial in form,
this arrangement means the roof slopes in a number
of directions and we had to design some timeconsuming connections.
BSP worked closely with the projects structural
engineers AKS Ward on the design of the
connections for the roof structure.
Close cooperation was key, says Mr Robinson.
The roof is extremely complicated and required a
lot of bolted connections to take into account all of
the slopes.
Because the hall needed to be largely columnfree to aid the movement of exhibits in, out and
around the hall, bracing was ruled out in most areas.
We were able to insert only one bay of vertical
bracing, that was co-ordinated with the display
designers, near to the perimeter wall which, due
to its prominence, was configured to become a
feature, explains Mr Perkins.
Designing a large open long span structure
isnt necessarily a complicated procedure, but
when there is also little room for bracing, another
arrangement has to be found. Working on the
steel frame AKS Ward conducted a 3D analysis to
determine the wind loading and where best to locate
bracing.
The majority of the wind loading on the
structure is transferred by the roof to the large
concrete base which supports the buildings
entrance, cafe and admin block, adds Mr Perkins.
The concrete base is formed by a large retaining
wall which was built-up when Norwest Holst started
on site last April. The sloping greenfield site was
leveled and the overburden was then used to form
a retaining wall which then supports the cafe and

administration block which also overlook the main
display area, so forming a two-level structure.
Also overlooking the entire structure and acting
as a beacon for the entrance to the museum is
the steel tower that supports the pod from which
external displays will be controlled. The tower is
supported by a 6m-high concrete base, while the
remaining 16m is made from steel and is being
fabricated off-site in two large pieces.
The main steel tower, housing a spiral staircase,
is 12m-high and was delivered to site by BSP as
a complete piece. This is formed by six circular
columns attached with helical bracing, says Mr
Robinson. We brought it to site and Norwest Holst
then clad it with mesh, installed the stairs and lifted
the 10t piece into place.
Once the steel tower was up, BSP brought the
viewing gallery or pod to site. This arrived as two
sections which were site welded to form a complex
seven-sided, 4m-high final piece of the tower.
This was the final piece of our work, explains
Mr Robinson. As of February the steel frame was
up and the tower was being readied for lifting into
position. The pod was far too complex to do on-site
so once it was delivered to site, we welded it and
then handed it over to the main contractor.
Once the pod was clad it was then lifted into
place and BSP then connected it to the steel mast
section of the tower.
Construction work is set to be completed in June
2008, with new exhibitions installed by winter of the
same year.
The associated benefits of this project will
see the Tank Museum reinforcing its place at the
front rank of the worlds finest military museums,
summed up Museum Director Richard Smith.
The work will provide a world class home for
our world class collection.
Top: External displays will

be controlled from the
tower.
Above: The tower will act
as a beacon above the new
entrance hall.
Below left: The roof design

allows natural daylight to
penetrate the display hall.
Below: The entrance hall,
caf, administration area
and tower are located on
a large concrete retaining
wall.
NSC March 2008
29
Technical
Loads and ULS Load

combinations to the Eurocodes
In the language of the Eurocodes, dead loads become permanent actions, imposed loads, snow loads and
wind loads are collectively called variable actions and load combinations becomes combinations of actions.
David Brown, SCI Deputy Director, explains the Eurocode system.
Actions
Actions are determined from the relevant part of BS
EN 1991 Actions on Structures, not forgetting that
designers will need to consult the National Annex
for each part. BS EN 1991-1-1 covers densities,
self weight and imposed loads and will be used
for such things as imposed loads on floors and
roofs although note that snow loads may be
more onerous and are determined from a different
Eurocode part. Reduction factors are available for
large areas of floors and when calculating the load
in a column from several storeys. BS EN 1991-1-1
also gives quite detailed allowances for moveable
partitions, which are often accounted for in design.
Snow loads are to be taken from BS EN
1991-1-3 and wind loads from BS EN 1991-1-4.
Unfortunately, the National Annex to BS EN
1991-1-4 Wind Actions is not yet published it is
expected later in the year. For UK designers, this
National Annex is very important as it presents
some quite significant changes from the Eurocode.
Combinations of actions at ULS
BS EN 1990 Basis of Structural Design requires
that structures and members are designed for all
possible combinations of actions that can occur
simultaneously. Fortunately for building designers,
a note in clause A1.2.1(1) allows the maximum
number of variable actions to be limited to two.
Some judgement may need to be exercised in
choosing which two variable actions to combine
in doubt, alternatives should be considered.
Four Ultimate Limit States are considered
relevant in BS EN 1990; EQU, STR GEO and FAT,
concerned with equilibrium, strength, ground and
fatigue. Mostly, designers will be concerned about
EQU when considering sliding or overturning, and
STR for the strength of frames and members.
Two methods of determining the combination
of actions are allowed for the STR Ultimate Limit
States. In the UK, the National Annex allows either
approach. For good economic reasons, it is likely
that UK designers will adopt the second approach.
All loading expressions take some digesting.
The first approach is to use expression 6.10.

G, j Gk, j + P P + Q,1Qk,1 + Q,i 0,iQk,i (6.10)
j 1
i 1
G represents permanent actions. These are to be

summed and multiplied by a partial factor, G
P represents prestressing, and is probably of
30
NSC March 2008
little interest in steel design!

The first Q represents the leading variable
action, and is multiplied by a partial factor, Q
Finally there are the other variable actions,
which are to be summed, factored by a partial
factor Q but also multiplied by a combination
factor, 0.
Actions are combined so long as they do not
serve to relieve the effect being considered.
The National Annex to BS EN 1990 must be
consulted for the values of the partial factors G and
Q and the combination factors 0. The combination
factors, 0 depend on the type of load so care
must be taken when extracting these from the
National Annex. The UK partial factors for actions
are shown below, with some typical 0 factors, all
taken from the UK National Annex.
Partial Factor
Permanent action, G = 1.35

Variable action, Q = 1.5
Combination factor
Office areas, 0 = 0.7
Roofs, 0 = 0.7

Snow loads (at lower altitudes), 0 = 0.5

Wind loads, 0 = 0.5
The second approach is to use the more onerous of
expressions 6.10a and 6.10b.

G, j Gk, j + P P + Q,1 0,1Q k,1 + Q,i 0,iQk,i (6.10a)
j 1
i 1

j G, j Gk, j + P P + Q,1Qk,1 + Q,i 0,iQk,i (6.10b)
j 1
i 1
The subtle attraction of this pair of expression

derives from two important changes from 6.10s:
the application of the 0 factor to the leading
variable action in expression 6.10a (not applied
in 6.10)
The introduction of a reduction factor applied
to the permanent actions in expression 6.10b
(not applied in 6.10)
The value of the reduction factor is given in the UK
National Annex to EN 1990 as 0.925. If considering
the EQU ULS, (sliding or overturning,) the use of
6.10a and 610b is not allowed.
Example 1
The following numerical example examines the
combination of actions for a floor beam, subject
only to permanent and variable actions.
J0625 kalt_halfA4_NSC_ad.qxd:J0625 kalt_halfA4_NSC_ad
22/2/08
10:05
Page 1
KALTENBACH at MACH08
SEE THE LATEST IN SAWING, DRILLING & PLATE PROCESSING STAND 4750, HALL 4
MORE PRODUCTS, MORE BENEFITS!
NE
CONTOUR MARKING
Auto inscribe
structural steel
NE
PUNCH & SHEAR KPS506

Strip-fed plate line plus
drill and plasma options
NE
ROTATOR
Ease fabricated
steel handling
ir
B
l4
,H
EC
50
N
l
47
ri
Ap
5
an
-2
St
tel: 01234 213201 fax: 01234 351226

email: [email protected] website: www.kaltenbach.co.uk
Kaltenbach Ltd 6 - 8 Brunel Road, Bedford, MK41 9TG
al
in
gh
am
SAW/DRILL system
World first in
Solid Carbide drilling
21
NE
NSC March 2008
31
Technical
Permanent action
Variable action (office)
= 3.5 kN/m
= 5 kN/m
Using expression 6.10

3.5 1.35 + 5 1.5 = 12.23 kN/m

Use 12.23 kN/m
From expression 6.10a
3.5 1.35 + 5 1.5 0.7 = 9.98 kN/m
From expression 6.10b
3.5 1.35 0.925 + 5 1.5 = 11.87 kN/m

Use 11.87 kN/m
Combination of actions including wind load
When members are subject to wind load in addition
to permanent and (for example) variable actions
from floor loads, the situation becomes slightly
more complex as both the imposed floor load
and the wind load can be considered, in turn, as
the leading variable action. The combinations
of actions are illustrated below. In each row, the
leading variable action is shaded. Pedantically,
the shaded zones in expression 6.10a indicate
the main accompanying variable action rather
than the leading variable action. When using the
expressions, each combination will have to be
considered taking firstly one variable action as
leading and then considering the combination with
the other variable action as leading.
Expression
(6.10)
(6.10a)
(6.10b)
Permanent action
Variable actions
Self-weight
Imposed floor
Wind
Gj,sup = 1.35
Q,1
Q,i 0,i = 1.5 x 0.5

= 0.75
Gj,sup = 1.35
Q,i 0,i = 1.5 x 0.7

= 1.05
Q,1
Gj,sup = 1.35
Q,i 0,1 = 1.5 x 0.7

= 1.05
Q,i 0,i = 1.5 x 0.5

= 0.75
Gj,sup = 1.35
Q,i 0,i = 1.5 x 0.7

= 1.05
Q,i 0,1 = 1.5 x 0.5

= 0.75
Gj,sup = 0.925 x 1.35

= 1.25
Q,1
Q,i 0,i = 1.5 x 0.5

= 0.75
Gj,sup = 0.925 x 1.35

= 1.25
Q,i 0,i = 1.5 x 0.7

= 1.05
= 1.5
= 1.5
Q,1
= 1.5
= 1.5
Note that in Expression 6.10a, the results are

identical whichever variable action is identified as
the main accompanying variable action, because the
UK National Annex specifies the same value for Q,1
and Q,i.
Example 2
The use of expressions 6.10a and 6.10b is
demonstrated in Figure 1 for a very simple bracing
system shown with its unfactored vertical and wind
loads. The equivalent horizontal forces (EHF) must
be calculated for each combination, because they
depend on the design (factored) vertical loads and
Rsler is a leading manufacturer and supplier of

conservation equipment that includes automatic
shot blasting, painting and drying systems.
Offering modern and innovative solutions Rsler
has supplied many major companies throughout
the world.
Shot Blast
Painting
Service
Conservation
Surface Preparation
Consultation
After sales service, spare parts and maintenance

programmes are also provided through our
various distribution points.
Specialist in solvent to water based

conversions.
For more information please contact
Paul Rawlinson or Haydn Kitchen.
Rsler UK
Unity Grove, School Lane
Knowsley Business Park
Prescot, Merseyside, L34 9GT
Tel: +44 (0) 151 482 0444
Fax: +44 (0) 151 482 4400
Email: [email protected]
Website: www.rosleruk.com
32
NSC March 2008
www.rlsd.com
Figure 1 Unfactored actions
Figure 2 Design values, 6.10b,

imposed floor load leading
Figure 3 Design values, 6.10b,

wind load leading
Figure 4 Design values, 6.10a
will be simply taken as 1/200 of the total

vertical load. The partial, combination
and reduction factors are taken from
the table above. In Figure 2, the design
values are shown using expression
6.10b, with the imposed floor load as
the leading variable action. In Figure
3, expression 6.10b is again used, but
with the wind as the leading variable
action. For completeness, and because
the design must be based on the most
onerous of expression 6.10a and 6.10b,
the design values using expression
6.10a are shown in Figure 4.
In this example, the maximum
design force in the bracing member is
determined from expression 6.10b with
wind as the leading variable action.
The maximum axial load in the column
is also determined from expression
6.10b, but with the imposed floor load
as the leading variable action. This
however is a very simple example
and it would be easy to conceive a
structure where the results were not so
straightforward. In general, all possible
design combinations of actions must
be checked.
For designers, the simplest solution
is to use expression 6.10, which will
be conservative. If more economy is
required, the use of expressions 6.10a
Trust is everything
60+ years experience supplying

structural flooring products
A reputation for industry firsts

Proven on some of the worlds
most prestigious projects
and 6.10b will be beneficial.

Comparisons with BS 5950.
For members subject only to vertical loading usually the vast
majority of members in a structure, there is an obvious attraction
in the Eurocode design combinations. Instead of the design load
being based on 1.4 dead + 1.6 imposed, the load may be based
on the more onerous of expression 6.10a or 6.10b. Unless the
permanent action is greater than the variable action by a factor
of 4.5 (quite an unusual situation!) expression 6.10b will be more
onerous, and the result will be a design based on 1.25 dead + 1.5
imposed load. With typical loads of (say) 3.5kN/m permanent
and 5 kN/m variable, this represents a reduction in design loads of
8%. If the imposed floor loads are storage loads, expression 6.10b
will not necessarily be the more onerous, because a different 0
factor is applied.
The lateral design loads according to the Eurocodes will
increase compared to BS 5950. The maximum design loads are
based on a partial factor of 1.5 in the Eurocode system, rather than
1.4 in BS 5950. This will affect all the systems (bracing or momentresisting frames), that provide stability. In addition, the EHF appear
in all load combinations, and will increase the lateral loads still
further by a modest amount, compared to BS 5950 when the
wind loads alone were usually the dominant load combination for
bracing design.
Further Help
A host of SCI design guides are to be published through 2008.
Loading is explained in the Introduction to Eurocodes (P361).
Examples of loading are covered in worked examples for students
(P376), and in a guide covering the design of multi-storey braced
frames (P365). Also in 2008, BCSA are to publish a Guide to
Eurocode Load Combinations for Steel Structures.
Capability. Innovation. Knowledge. Its strengths like these

that make Richard Lees Steel Decking such a powerful choice.
And enable us to create such a positive, dependable
difference to your structural flooring projects. For more
products, more experience and more reassurance, talk to
Richard Lees Steel Decking. Its everything you need.
Richard Lees Steel Decking Ltd

Moor Farm Road West, The Airfield, Ashbourne,
Derbyshire DE6 1HD, UK.
Tel: +44 (0) 1335 300 999 | Fax: +44 (0) 1335 300 888
NSC March 2008
33
40 Years Ago in
Back-to-back
Cantilever Hangar
Aeroplanes get larger and larger, consequently hangars to house them must grow
at a similar rate and this inevitably
means greater cost.
The Lockheed company had such a problem with the housing of its latest transport aeroplane, the largest transport yet
built. But it has been solved by an ingenious patented gigantic steel framed double
cantilever hangar large enough to house
simultaneously four aircraft, each of which
is 246 ft long, 65 ft high and measures 223
ft wing tip to wing tip. And it shows savings
in cost!
The design of the hangar envisages two
back-to-back cantilevered canopies, one for
static and fatigue ground testing, the other
to house aircraft undergoing actual flight
tests. The two areas are completely column
free and provide a clear-span height of 78 ft
throughout. Offices, laboratories and workshops are contained in the central core of
the hangar occupying five storeys and a total area of 240,000 sq ft. This central core is
the supporting structure for the two massive cantilevered roofs: one roof extends 261
ft, the other 271 ft.
The outstanding structural feature of the
hangar is a superstructure extending above
the roof of the central core and holding
the cantilevered trusses in position. This
superstructure is supported by one hundred 14-in. columns which extend from the
foundations up through the central core. To
achieve the full height of the superstructure 142 ft from the ground these main
columns which are 87 ft long below the roof,
are spliced above the roof of the centre core.
Two exposed main tension and compression members 24-in. wide flange beams
with 18-in. channel caps extend down at
an angle from the tops of the columns and
connect to the trusses forming a triangular
structural system.
The object of the superstructure in addition to holding the cantilevered trusses in
shape is to provide resistance against uplift in abnormal wind conditions. This means
that the ends of the trusses will move up
and down a few inches and no more, under
maximum wind or live load conditions.
It is estimated by the designers that the advantage in saving of steel with this hangar
over conventional cantilever design, lacking
the superstructure, can be as high as 32 per
34
NSC March 2008
cent with a maximum saving in cost of 24

per cent very substantial indeed.
The designer draws special attention to the
fact that each cantilever canopy supports a
full coverage, bridge crane system of 10 ton
capacity.
The hangar illustrated in this article is
equipped with enormous structural steel
sliding doors on each of the two 480 ft hang-
ar ends: these doors are 70 ft high and 80 ft

wide but it is emphasized that experiments
are now being carried out with doors of up
to 100 ft clear height.
Five thousand tons of steel are being used
in this structure which became fully operational in February 1968. Complete dimensions of the hangar: 630 ft by 480 ft with a
height of 142 ft.
SHALLOW..
SHALLOWER..
ULTRA SHALLOW
USFB
Span
Centres
Top Tee
Bottom Tee
Project
294 x 254/368 x 154 kg/m

8.5m
5.3m
254 x 254 x 132
356 x 368 x 177
Ormeau Road, Belfast
USFB
Span
Centres
Top Tee
Bottom Tee
Project
206 x 152/254 x 55 kg/m

5.5m
3m
152 x 152 x 37
254 x 254 x 73
Dawson Place, London
USFB
Span
Centres
Top Tee
Bottom Tee
Project
Now you can achieve oor depths normally associated

with concrete, but with the economy, exibility and
short lead-times of steel.
USFB and Pre-cast Construction
Westoks website which can be accessed by

clicking on the Free Designs tab in the menu bar.
These can be completed and submitted to
Westok online.
The USFB (Ultra Shallow Floor Beam)

from Westok is a new generation of beam,
which massively extends the existing range
of steel options available for the at slab
market. USFBs can be as shallow as 145mm,
making them ideal for projects in the
Residential, Health, and Education sectors.
USFB and Metal Deck Construction
Alternatively, you can discuss your requirements

with one of Westoks Advisory Engineers by
calling 01924 264121 or completing the
form below and faxing back. One of Westoks
Advisory Engineers will contact you.
FREE DESIGN SERVICE

Westok provides Engineers with a free design
service for cellular beams and USFBs. To utilise
this service use the Design Enquiry Forms on
www.westok.co.uk
A 20 page
Design Guide
for Westoks USFB
is available free
of charge. To obtain
a copy complete the
form and fax back
to Westok.
To receive any of these services please complete the details below and fax back.
An Advisory Engineer will contact you to discuss your requirements.
I am interested in the following services from Westok:
FREE Design
Service
165 x 152/254 x 51.5 kg/m

4.3m
2.5m
152 x 152 x 30
254 x 254 x 73
The Bridge, Perth
(please tick all that apply)
Project Design Meeting with

a Westok Advisory Engineer
USFB Design Guide

state no. of copies reqd.
Technical Seminars - Cellular Beams & USFBs - Applications & Design

Name
Company
Address
Postcode
Tel
Fax
Email
FAX BACK TO: 01924 280030
Westok Limited, Horbury Junction Industrial Estate,

Horbury Junction, Wakefield, West Yorkshire WF4 5ER
Tel: 01924 264121 Fax: 01924 280030

www.westok.co.uk
NSC March 2008
35
Publication
For SCI publications, please contact Publication Sales:

Tel: (Direct) 01344 636505 Fax: 01344 636570 Email: [email protected] Website: www.shop.steelbiz.org
The Steel Construction Institute, Silwood Park, Ascot SL5 7QN
Acoustic detailing for steel construction

Comprehensive and up-to-date guidance for achieving
effective sound insulation within steel framed buildings
Catalogue Reference: P372

Author: A G J Way and G H
Couchman
This publication gives acoustic

details for steel framed buildings
with a range of floor and wall
constructions. The guidance is
based on acoustic test results
and information published by
manufacturers and suppliers of
plasterboard, light steel framing,
acoustic systems and associated
products. It provides advice to
architects, designers and other
construction professionals on
detailing to achieve the required
acoustic performance. It explains
and provides information on:
The general principles of sound
insulation.
Regulatory requirements for
modern residential buildings.
Generic acoustic solutions using
steel construction technologies.
36
NSC March 2008
The acoustic solutions include

constructions suitable for
separating walls and floors
between dwellings.
Recommended junction details
for separating floors supported on
hot-rolled steel frames
Integration of building elements
into separating walls and floors.
Expected acoustic performance
for walls and floors (as airborne
insulation values) and for floors
only (as impact sound values).
It supersedes the previous main
SCI publication, P336, Acoustic
detailing for multi-storey residential
buildings and updates and extends
the guidance on several other
publications on the subject.
PRICES:
Non-member 50. (plus P&P)
Member 25 (plus P&P)
ISBN 978-1-85942-178-9; 90 pp,
A4, paperback; February 2008
Codes & Standards
New and Revised

Codes & Standards
(from BSI Updates February 2008)
BS EN PUBLICATIONS
The following are British
Standard implementations of the
English language versions of
European Standards (ENs). BSI
has an obligation to publish all
ENs and to withdraw any
conflicting British Standards or
parts of British Standard. This has
led to a series of standards, BS
ENs using the EN number.
Note: The date referenced in the
identifier is the date of the
European standard.
NA to BS EN 1994:UK National Annex to Eurocode 4.
Design of composite steel and
concrete structures
NA to BS EN 1994-2:2005
General rules and rules for
bridges
No current standard is
superseded
PUBLISHED
DOCUMENTS
AMENDMENTS TO
BRITISH STANDARDS
NA to BS EN 1997-1:2004
UK National Annex to Eurocode 7.
Geotechnical design.
General rules.
CORRIGENDUM 1
NEW WORK STARTED

PD 6698
Background paper to the UK
National Annexes to Eurocode 8
CEN EUROPEAN
STANDARDS
EN 14399:High strength structural bolting
for preloading
EN 14399-7:2007
System HR. Countersunk head
bolt and nut assemblies
EN 14399-8:2007
System HV. Hexagon fit bolts
and nut assemblies
PD 6696-2:2007
Background paper to BS EN
1994-2 and the UK National Annex
to BS EN 1994-2. Eurocode 4.
Design of composite steel and
concrete structures. General
rules and rules for bridges
NSC March 2008
37
Advisory Desk
AD 319
Update on the fire protection of beams with web openings.
In the last five years there have
been many developments in the fire
protection of beams with web openings. For most cellular beams, that
is beams with circular openings, fire
protection requirements can be ascertained using simple tabular guidance. However, there are limitations
on the opening geometry covered
by existing simple guidance and for
beams with rectangular openings
or with a combination of circular
and rectangular openings, there are
no straightforward methods for assessing the fire protection requirements. The issue of fire protection
for all beams with web openings
must therefore be addressed at
the design stage, as the structural
designer needs to ensure that a fire
protection solution can be achieved
for the proposed opening geometry.
Failure to identify a fire protection
solution prior to fabrication of the
steelwork is often expensive to rectify. Structural designers need to be
aware of the limitations of current
fire design guidance when designing beams with web openings that
will require fire protection, and if the
beam geometry does not conform
to those limits then the structural
designer should make arrangements
to supply the appropriate limiting
temperatures to the fire protection
specialist.
This advisory desk note provides
an overview of the publications that
have appeared and in some cases
been withdrawn as the work on the
fire resistance of these structural
members has progressed. It also
reviews the design options that
are available for beams with web
openings and provides advice on
sources of further information where
required, but it provides no new
guidance.
The procedure for testing and
assessing the performance of intumescent coatings for use on cellular
beams has now been developed
by ASFP in consultation with SCI
and the fire testing laboratories. A
number of intumescent manufacturers have tested their products in accordance with this testing protocol
and given this development it is now
appropriate to withdraw generic
guidance for the fire protection of
cellular beams in favour of productspecific guidance.
38
NSC March 2008
Published Design Guidance

Research on beams with circular
and rectangular web openings has
shown that the design rule that had
been developed for use with castellated beams and non reactive fire
protection materials would underestimate the thickness of fire protection for cellular beams. As research
in the area has developed, a number
of documents offering design guidance have been produced; these are
summarised in the adjacent table
and their status given.
Ref
Description
Status
AD269
Interim guidance on the fire protection of

beams with circular web openings
Withdrawn
RT983
Interim guidance on the fire protection of

beams with circular web openings
Withdrawn
RT1006
Commissioned by Westok Ltd to extend the

scope of the guidance given by RT983 for
beams designed using Cellbeam
Withdrawn
(see AD308)
AD299
Provides background information on the

development of RT1085
Current
RT1085
Published as a replacement to RT983.
To be withdrawn April 08
AD308
Notification of the withdrawal of RT1006.

Generic temperatures for Westok beams are
no longer required as Cellbeam Automate V6.1
now includes a fire design module.
Current
Design Methods
For optimum economy and structural safety, the structural engineer
should give the fire protection supplier appropriate limiting temperatures for each structural member, on
the drawings and in the fire protection specification. This is particularly
important for beams with large web
openings, as the limiting temperatures depend on the beam geometry,
load level and load distribution
properties with which the structural
designer will be more familiar than
the fire protection specialist.
The SCI recommends that limiting
temperatures for beams with web
openings protected using an intumescent coating are obtained using
one of the following three options.
These design options are not new
guidance and have been described
previously in AD299. In all cases SCI
recommend that the fire protection
product applied to the steelwork
should be tested and assessed in
accordance with the ASFP protocol
for cellular beams.
If fire protection requirements
cannot be ascertained using Option
1 (limited to beams with circular
openings) or Option 2, structural designers should take responsibility for
determining limiting temperatures
using the advanced analysis methods described in Option 3.
RT1187
This document will describe the basis of the

product-specific design guidance currently
available from intumescent manufacturers
To be published
Option 1 Tables of limiting

temperatures
Simplified guidance is available
from the fire protection manufacturers in the form of tables of limiting
temperatures, but only for beams
with circular web openings and geometrical limitations apply to the positions and sizes of the openings. The
structural designer should supply
suitable information on the geometry

and loading, to enable the fire protection manufacturer to determine
an appropriate limiting temperature
for the beam. Further advice is
given in RT1187.
Option 2
Proprietary Software
Proprietary beam design software
that explicitly calculates the load
carrying capacity for beams with
web openings at the fire and ultimate limit states may be used.
The development of such software
should be based on the observed
temperature distribution throughout
similar beams for different coating thicknesses and the observed
performance of beams in loaded fire
resistance tests. The software will
give the values of limiting temperature that are needed for the structural drawings and the fire protection
specification.
Proprietary software that covers the room temperature and fire
design of their particular product is
currently available from Fabsec and
Westok. It should be noted that the
results of analysis based on proprietary software are only applicable
to that structural product protected
in accordance with the guidance
provided by the software supplier.
Option 3 Advanced analysis
Beams that are outside the scope
of the fire protection manufacturers product-specific limiting temperature tables (notably beams with
rectangular or elongated circular
openings) and which have not been
designed using proprietary software
will need to be evaluated using

advanced analysis in order to determine the appropriate limiting temperature. As this advanced analysis
is closely related to the structural
design it should be undertaken by
the structural designer or a suitability qualified consultant.
The structural model used for this
purpose should take account of all
practical modes of failure for beams
with web openings and the thermal
model should permit a suitable temperature distribution to be applied
to the cross section. The thermal
model should take account of the
increase in temperature of the web
posts relative to the flanges and the
effect of section asymmetry on top
flange temperature. The performance of the intumescent coating applied to the beam should be compatible with this assumed temperature
distribution used in the structural
analysis. Data on the appropriate
temperature distribution may be
obtained from fire tests on protected
sections or alternatively the thermal
distribution given in RT1187 may be
applied.
References
Fire Protection for Structural Steel in
Buildings, 4th ed, is available from
www.asfp.co.uk
All the Advisory desk notes (including the withdrawn notes) and current SCI reports are available on
www.Steelbiz.org.
Contact: Dr Ian Simms
Tel: 01344 636557
Code of Practice for Erection of

Multi-Storey Buildings
The document provides guidance to clients,
planning supervisors, principal contractors,
designers and steelwork contractors on
management procedures and methods, erection
method state-ments, site preparation, delivery,
storage, stability, lifting etc and aids compliance
with the Health and Safety at Work Act.
Steel Construction Books
Health & Safety Specification Assessment Erection Design

NEW
CONNECTING The Green Book*

Joints in Steel
Construction:
Simple Connections
Design guidance and worked
examples based on BS 5950
- 1:2000 for connections in
buildings designed as braced
frames where connections
carry mainly shear and axial
loads only.
DESIGNING - The Red Book

The Handbook of Structural Steelwork
This handbook gives practical design advice,
worked examples, section properties and
member capacities. This edition includes the
additional 21 new Advance sections produced
by Corus and the section property and
member capacity tables have been dual titled
to reflect the relationship between BS 4
sections and the Advance range of sections.
The tables for hot formed tubes have also
been dual titled. The handbook is in
accordance with the recommendations given
in BS 5950-1: 2000.
This edition of the Blue book gives a

comprehensive range of member property and
capacity tables in accordance with BS 5950-1:
2000. It includes the 21 new Advance sections
produced by Corus and the section property
and member capacity tables have been dual
titled to reflect the relationship between BS 4
sections and the Advance range of sections.
This edition also includes a wider range of
hollow sections. The tables for hot finished
hollow sections have also been dual titled to
show the relationship between BS EN 10210-2
sections and the Celsius range of sections.
The 5th edition is a half-way house between

the 4th edition and requirements of the
forthcoming European standard EN 1090-2.
Some of the changes include updating the
specifications for steel sections, bolts and
welding, the introduction of BS EN 3834 for
the management of welding activities, a
section on LMAC, an updated table on hold
times and a new annex giving guidance on
visual inspection of welds.
SPECIFYING The Grey Book

Commentary on the
4th edition of the
National Structural
Steelwork Specification
This publication provides
useful guidance to both
specifiers and contractors
and can be used as an
informative reference.
Guide to the
Erection of Steel Bridges
Cover all aspects in the planning and
implementation of the safe erection of a steel
bridge so that personnel in the whole team will
benefit from a better understanding of the erection
process. The guide is complementary to the
publication Steel Bridges.
Guide to Steel Erection
in Windy Conditions
Covers issues as the maximum wind speed in
which steelwork should safely be erected, the
role of management and supervision of controlling
work etc. Advice is also provided for designers
concerning aspects raised by the effect of wind on
steelwork during erection.
STEEL BUILDINGSThe Silver Book

Steel Buildings
This book covers everything
from steel design; section
property tables; industrial and
multi-storey buildings;
cladding and decking;
through to fire; transport and
erection; software; contracts
and case studies.
SPECIFYING - The Black Book

National Structural
Steelwork Specification
NEW
Code of Practice for

Metal Decking & Stud Welding
Clear, unambiguous and practical information
for Clients, Planning Supervisors, Principal
Contractors, Designers and Steelwork Contractors
about the systems of work to be employed on site
together with the required site safety attendances.
STEEL DETAILING The Magenta Book*

Steel Details
This book provides practical
advice on the issues that
affect the efficient detailing of
steelwork connections. The
publication contains a rich
array of details from actual
structures and allows both
engineers and architects to
interrogate them.
DESIGNING - The Blue Book

Steelwork Design Guide to
BS 5950-1: 2000
NEW
Code of Practice for

Erection of Low Rise Buildings
Invaluable guidance on the safety aspects of:
site management & preparation; delivery,
stacking & storage of materials; structural
stability; holding down & locating arrangements
for columns; lifting & handling; interconnection
of components.
GALVANIZING The Beige Book

Galvanizing
Structural Steelwork
An approach to the
management of Liquid Metal
Assisted Cracking. Practical
guidance to clients, specifiers
and engineers identifying
circumstances where any
increased risk of LMAC can
be ameliorated.
NEW
Health and Safety in the Office

The booklet covers all hazards found in offices and the precautions that
must be taken to avoid injury and ill health. It provides basic Health & Safety
information for employees.
ASSESSING The Brown Book

Historical Structural
Steelwork Handbook
Developments from the
mid-19th Century in iron
and steel and the changes
in design, loading and
stresses; tables of section
properties rolled since 1887;
guidance on assessment of
existing structures.
BRIDGES The Purple Book

Steel Bridges
A practical
approach
to the design of
steel bridges for
efficient fabrication
and construction.
Guide to Work at Height during the Loading and

Unloading of Steelwork
The aim of this guide is to improve health and safety
during loading and unloading of steelwork from
lorries and trailers that takes place either at the
steelwork factory or on sites. It describes the
management procedures and methods to be
adopted for access and working at height and is
intended to serve as a standard reference when
drafting site-and project-specific method statements.
Health and Safety in the Workshop A Guide for Steelwork Contractors

It is intended that it should be given to each employee in the workshop,
thereby assisting the company to discharge part of its legal responsibilities
under Health & Safety Regulations.
Health and Safety On Site
The booklet covers a range of Health and Safety topics that site-based
personnel need to understand in order to carry out work safely.
Health and Safety: a Pocket Guide for Managers & Supervisors
This booklet covers topics such as risk assessment, method statements,
policies, setting up the workplace, inspections, training, statutory test etc and
provides a useful, easy to understand, reference on Health & Safety Law.
For help and advice on steel construction and information about companies and suppliers visit www.SteelConstruction.org
PLEASE SUPPLY:
To: The British Constructional Steelwork Assoc Ltd., (Publications Dept.), 4 Whitehall Court, Westminster,
London SW1A 2ES Tel: 020 7839 8566 Fax: 020 7976 1634 email: [email protected]
copies of The Red Book

@ 40 each inc. P&P
copies of Erection of Multi-Storey Buildings

@ 20 each inc. P&P
copies of The Blue Book*

@ 80 each inc. P&P
copies of Erection of Low Rise Buildings

@ 20 each inc. P&P
made payable to BCSA (in EU add 3 and outside EU add 6 per publication)
copies of The Black Book

@ 25 each inc. P&P
copies of Metal Decking & Stud Welding

@ 20 each inc. P&P
Please debit my VISA/American Express/Access card:
copies of The Grey Book

@ 10 each inc. P&P
copies of Erection of Steel Bridges

@ 30 each inc. P&P
copies of The Purple Book

@ 25 each inc. P&P
copies of Steel Erection in Windy Conditions

@ 15 each inc. P&P
copies of The Green Book*

@ 70 each inc. P&P
copies of Work at Height during the Loading

& Unloading of Steelwork @ 10 each inc. P&P
Signature....................................................................................................................................................
copies of The Magenta Book*

@ 40 each inc. P&P
copies of Health & Safety in the Office

@ 3 each inc. P&P
Address of cardholder ...............................................................................................................................
copies of The Silver Book

@ 25 each inc. P&P
copies of Health & Safety in the Workshop

@ 5 each inc. P&P
.................................................................................... Postcode ..............................................................
copies of The Beige Book

@ 15 each inc. P&P
copies of Health & Safety On Site

@ 5 each inc. P&P
Name .......................................................................... Tel ........................................................................
copies of The Brown Book

@ 27 each inc. P&P
copies of H & S for Managers & Supervisors

@ 15 each inc. P&P
See www.SteelConstruction.org for special offers !
I enclose a cheque for
*Green Book, Blue Book and Magenta Book, in EU add 8, outside EU add 10
Expiry date:
Name on card ........................................................................................
Please deliver to:
Address ....................................................................................................................................................
.................................................................................... Postcode ..............................................................
Please
allow 28 days39
for delivery
NSC March
2008
BCSA Members
The British Constructional

Steelwork Association Ltd
BCSA is the national organisation for the steel construction industry. Details
of BCSA membership and services can be obtained from Gillian Mitchell MBE,
Deputy Directory General, BCSA, 4 Whitehall Court, London SW1A 2ES
Tel: 020 7839 8566 Email: [email protected]
KEY
Categories
A All forms of building steelwork
B* Bridgework
C Heavy industrial plant structures
D High rise buildings
E Large span portals
F Medium/small span portals and

medium rise buildings
H Large span trusswork
J Major tubular steelwork
K Towers
L Architectural metalwork
M Frames for machinery, supports for

conveyors, ladders and catwalks
N Grandstands and stadia
S Small fabrications
Quality Assurance
Certification
Q1 Steel Construction
Certification Scheme Ltd
Q2 BSI
Q3 Lloyds
Q4 Other
ACL STUCTURES LTD (E F H M 4)

Holland Way Ind. Est., Blandford, Dorset DT11 7TA
Tel 01258 456051 Fax 01258 450566
AMSE LTD
Clara Road, Moatee, Co Westmeath, Republic of Ireland
Tel 00 353 90 648 1184 Fax 00 353 90 648 1735
ASA STEEL STRUCTURES LTD
Brick Kiln Lane, Parkhouse Ind. Est. West,
Newcastle-under-Lyme, Staffs ST5 7EF
Tel 01782 566366 Fax 01782 564785
Classification Contract Value

10 Up to 40,000
9 Up to 100,000
8 Up to 200,000
7 Up to 400,000
6 Up to 800,000
5 Up to 1,400,000
4 Up to 2,000,000
3 Up to 3,000,000
2 Up to 4,000,000
1 Up to 6,000,000
0 Above 6,000,000
Notes
1 Applicants may be registered in one or more

categories to undertake the fabrication and the

responsibility for any design and erection of the
above.
2 Where an asterisk (*) appears against any

companys classification number, this indicates that

the assets required for this classification are those

of the parent company.
* For details of bridgework subcategories contact

Gillian Mitchell at the BCSA.
BSB Structural Ltd

Whitecross Industry Park, Whitecross,
Nr Linlithgow, West Lothian EH49 6LH
Tel 01506 840937 Fax 01506 840932
A. C. BACON ENGINEERING LTD (E F H 5)
Norwich Rd, Hingham, Norwich NR9 4LS
Tel 01953 850611 Fax 01953 851445
BALLYKINE STRUCTURAL ENGINEERS LTD (E F H J N 4 Q2)
51 Lisburn Rd, Ballynahinch, Co Down BT24 8TT
Tel 028 9756 2560 Fax 028 9756 2751
CONDER STRUCTURES LTD (D E F H 1 Q2)

Wellington Rd, Burton-on-Trent, Staffs DE14 2AA
Tel 01283 545377 Fax 01283 530483
WILLIAM HALEY ENGINEERING LTD (E F K M 4 Q1)

Bellcombe Works, East Brent, nr. Highbridge, Somerset TA9 4DB
Tel 01278 760591 Fax 01278 760587
LEONARD COOPER LTD (C F H K M 6 Q1)

Balm Road, Hunslet, Leeds LS10 2JR
Tel 0113 270 5441 Fax 0113 276 0659
HAMBLETON STEEL LTD (Q1)

Gatherley Road, Brompton-on-Swale,
Richmond, North Yorkshire DL10 7JH
Tel 01748 810598 Fax 01748 810601
CORDELL GROUP LTD (Q4)

Sotherby Road, Skippers Lane Industrial Estate,
South Bank, Middlesborough TS6 6LP
Tel 01642 452406 Fax 01642 464118
WILLIAM HARE LTD (A 0 Q1)

Brandlesholme House, Brandlesholme Rd, Bury, BL8 1JJ
Tel 0161 609 0000 Fax 0161 609 0409
COVENTRY CONSTRUCTION LTD (Q1)

Torrington Avenue, Coventry CV4 9AP
Tel 024 7646 4484 Fax 024 7669 4020
M. HASSON & SONS LTD (Q1)

17 Glebe Rd, Rasharkin, Co. Antrim BT44 8SS
Tel 028 2957 1281 Fax 028 2957 1575
CRONIN BUCKLEY FABRICATION & CONSTRUCTION LTD

Killumney, Ovens, Co Cork, Republic of Ireland
Tel: 00 353 214 870 017 Fax: 00 353 214 872 890
HENRY SMITH (CONSTRUCTIONAL ENGINEERS) LTD

(C D E F H J 2)
Wharton Steelworks, Winsford CW7 3BW
Tel 01606 592121 Fax 01606 559134
CROWN STRUCTURAL ENGINEERING LTD (Q1)

Burma Rd, Blidworth, Mansfield, Notts NG21 0RT
Tel 01623 490555 Fax 01623 490666
CUSTOM METAL FABRICATIONS LTD
Central Way, Feltham TW14 0XJ
Tel 020 8844 0940 Fax 020 8751 5793
DGT Steel & Cladding Ltd
Atlas Works, Norwich Road, Lenwade,Norwich NR9 5SW
Tel 01603 30820 Fax 01603 308201
D H STRUCTURES LTD (Q2)
Tollgate Drive, Tollgate Industrial Estate,
Beaconside, Stafford ST16 3HS
Tel 01785 246269 Fax 01785 222077
DUGGAN STEEL
The Square, Millstreet, Co Cork, Republic of Ireland
Tel 00 353 29 70072 Fax 00 353 29 70073
ELLAND STEEL STRUCTURES LTD (C D E F K 1 Q1)
Philmar House, Gibbet St, Halifax HX2 0AR
Tel 01422 380262 Fax 01422 380263
Barretts of Aspley Ltd

North Common Farm, Woburn Road,
Lidlington, Bedfordshire MK43 0NN
Tel 01525 280136 Fax 01525 280137
EMMETT FABRICATIONS LTD (E F H 6)

Hirst Wood Works, Hirst Wood Road, Shipley BD18 4BU
Tel 01274 597484 Fax 01274 588671
ALLERTON ENGINEERING LTD (B 5* Q3)

Allerton House, Thurston Road,
Northallerton, N. Yorkshire DL6 2NA
Tel 01609 774471 Fax 01609 780364
ALLOTT BROS & LEIGH
Fullerton Rd, The Ickles, Rotherham S60 1DJ
Tel 01709 538000 Fax 01709 538004
ALLSLADE PLC (E F H L 2)
Dundas Lane, Portsmouth, Hants PO3 5SD
Tel 023 9266 7531 Fax 023 9267 9818
THE ANGLE RING CO LTD
Bloomfield Road, Tipton DY4 9EH
Tel 0121-557 7241 Fax 0121-522 4555
BILLINGTON STRUCTURES LTD (A 0 Q1)

Barnsley Road, Wombwell S73 8DS
Tel 01226 340666 Fax 01226 755947
EVADX LTD (A 3 Q4)

Unit 9, Tir Llywd Enterprise Park, St. Asaph Avenue,
Kinmel Bay, Rhyl LL18 5JZ
Tel 01745 336413 Fax 01745 339639
BONE STEEL LTD

P.O. Box 9300, Wishaw, Lanarkshire ML2 0YA
Tel 01698 375000 Fax 01698 372727
FAIRFIELD-MABEY LTD (A B 0 Q4)

Chepstow, Monmouthshire NP16 5YL
Tel 01291 623801 Fax 01291 625453
BORDER STEELWORK STRUCTURES LTD (C E F H J N 4)

Winchester House, 58 Warwick Rd, Carlisle CA1 1DR
Tel 01228 548744 Fax 01228 511073
BOURNE STEEL LTD (A 0 Q2)
St Clements House, St Clements Rd, Poole, Dorset BH12 4GP
Tel 01202 746666 Fax 01202 732002
W.S BRITLAND & CO. LTD (Q2)
Tilmanstone Works, Pike Road, Eythorne, Dover CT15 4NB
Tel 01304 831583 Fax 01304 831983
BRITON FABRICATORS LTD (B 5 Q4)
Watnall Road, Hucknall, Notts NG15 6EP
Tel 0115 963 2901 Fax 0115 968 0335
BROWNE STRUCTURES LTD
Queens Drive, Newhall, Swadlincote, Derbyshire DE11 OEG
Tel 01283 212720 Fax 01283 215033
FISHER ENGINEERING LTD (A 1 Q1)

Ballinamallard, Enniskillen, Co Fermanagh BT94 2FY
Tel 028 6638 8521 Fax 028 6638 8706
FOX BROS ENGINEERING LTD
Ballycanew, Gorey, Co Wexford, Republic of Ireland
Tel 00 353 53 942 1677 Fax 00 353 53 942 1733
GME STRUCTURES LTD
Unit E11-E14, Wem Industrial Estate,
Soulton Road, Wem, Shropshire SY4 5SD
Tel 01939 233023 Fax 01939 234059
GIBBS ENGINEERING LTD (F H J L M 6 Q4)
17A Axe Road, Colley Lane Industrial Estate,
Bridgwater, Somerset TA6 5LP
Tel 01278 455253 Fax 01278 453174
GLENTWORTH FABRICATIONS LTD (F H J K L M N 6)
Molly Millars Bridge, Molly Millars Lane, Wokingham RG41 2WY
Tel 0118 977 2088 Fax 0118 977 2907
BUTTERLEY LTD (Q4)

Ripley, Derby DE5 3BQ.
Tel 01773 573573 Fax 01773 749898
GORGE FABRICATIONS LTD

Gorge House, Great Bridge Industrial Estate,
Toll End Road, Tipton, West Midlands DY4 OHR
Tel 0121 522 5770 Fax 0121 557 0415
ARROMAX STRUCTURES LTD (Q4)

Langwith Junction, Mansfield, Notts NG20 9RN
Tel 01623 747466 Fax 01623 748197
CAIRNHILL STRUCTURES LTD (C F H J L M 5* Q4)

Sun Works, Waverley Street, Coatbridge,Lanarkshire ML5 2BE
Tel 01236 449393 Fax 01236 428328
GRAHAM WOOD STRUCTURAL LTD (A 1)

Lancing Business Park, Chartwell Road, Lancing BN15 8TY
Tel 01903 755991 Fax 01903 755384
ATLAS WARD STRUCTURES LTD (A 0* Q1)

Sherburn, Malton, N. Yorkshire YO17 8PZ
Tel 01944 710421 Fax 01944 710512
CAUNTON ENGINEERING LTD (C E F H J M N 1 Q1)

Moorgreen Ind. Park, Moorgreen, Nottingham NG16 3QU
Tel 01773 531111 Fax 01773 532020
GRAYS ENGINEERING (CONTRACTS) LTD

Globe Industrial Estate, Rectory Road, Grays, Essex RM17 6ST
Tel 01375 372411 Fax 01375 375079
ATLASCO CONSTRUCTIONAL ENGINEERS LTD

Rowhurst Industrial Estate, Apedale, Chesterton,
Newcastle-U-Lyme ST5 6BD
Tel 01782 564711 Fax 01782 564591
CHIEFTAIN CONTRACTS LTD

Antonine Works, Broomhill Road, Bonnybridge FK4 2AL
Tel 01324 812911 Fax 01324 814927
D A GREEN & SONS LTD (A 1 Q1)

Whaplode, Spalding, Lincs PE12 6TL
Tel 01406 370585 Fax 01406 370766
CLEVELAND BRIDGE UK LTD (A B 0* Q3)

Cleveland House, Yarm Rd, Darlington, Co Durham DL1 4DE
Tel 01325 381188 Fax 01325 382320
GREGG & PATTERSON (ENGINEERS) LTD (Q4)

Riverside Works, Ballyskeagh Road, Lambeg, Co Antrim BT27 5TD
Tel 028 9061 8131 Fax 028 9062 2813
COMPASS ENGINEERING LTD (C E F K 4)

Whaley Road, Barugh, Barnsley S75 1HT
Tel 01226 298388 Fax 01226 283215
HAD-FAB LTD (Q4)

Macmerry Ind. Est., Tranent, East Lothian EH33 1RD
Tel 01875 611711 Fax 01875 612711
apex steel structures ltd

Kings Close, Charfleets Industrial Estate,
Canvey Island, Essex SS8 0QZ
Tel 01268 660 828 Fax 01268 660 829
B D STRUCTURES LTD (E F H M 5)
Westhoughton Ind Est, James St, Westhoughton, Lancs, BL5 3QR
Tel 01942 817770 Fax 01942 810438
BHC LTD
Edinburgh Road, Carnwath, Lanarkshire ML11 8LG
Tel 01555 840006 Fax 01555 840036
40
NSC March 2008
JAMES BROS (HAMWORTHY) LTD (E F H M 5 Q4)

Stanley House, 3 Fleets Lane, Poole, Dorset BH15 3AJ
Tel 01202 673815 Fax 01202 684033
LEACH STRUCTURAL STEELWORK LTD (C E F H J M 5)

Brockholes Way, Claughton-on-Brock, nr Preston PR3 0PZ
Tel 01995 640133 Fax 01995 640719
AWF STEEL LTD

21 Lenziemill Rd, Lenziemill, Cumbernauld G67 2RL
Tel 01236 457960 Fax 01236 452250
Advanced Fabrications Poyle Ltd (F J H J K L M 7 Q4)

772-775 Buckingham Avenue, Slough, Berkshire SL1 4NL
Tel 01753 531116 Fax 01753 531120
Hills of Shoeburyness Ltd (L M S 6)

17-19 Towerfield Road, Shoeburyness, Essex SS3 9QL
Tel 01702 296321 Fax 01702 297072
Discain Project Services Ltd (Q1)

Hartburn Close, Crow Lane Industrial Estate,
Northampton NN3 9UE
Tel 01604 787276 Fax 01604 407290
ELSOME STRUCTURES LTD (F L M 6*)

Welby Road, Asfordby Hill, Melton Mowbray,
Leicestershire LE14 3RD
Tel: 01664 813234 Fax: 01664 813341
F J BOOTH & PARTNERS LTD

Dockside Road, Middlesbrough, Cleveland TS3 8AT
Tel 01642 241581 Fax 01642 223398
HILLCREST STRUCTURAL LTD

Hillcrest House, Toynbee Road, Eastleigh, Hants SO50 9DT
Tel 023 8064 1373 Fax 023 8061 3586
JAMES KILLELEA & CO LTD (C D E F H N 1*)

Stoneholme Road, Crawshawbooth, Rossendale, Lancs BB4 8BA
Tel 01706 229411 Fax 01706 228388
BARRETT STEEL BUILDINGS LTD (E F H 1 Q1)

Barrett Court, Cutler Heights Lane, Dudley Hill, Bradford BD4 9HZ
Tel 01274 266800 Fax 01274 266860
Adstone Construction Ltd

Adstone House, Wassage Way,
Hampton Lovett Industrial Estate, Droitwich WR9 9NX
Tel 01905 794561 Fax 01905 794040
HESCOTT ENGINEERING CO LTD

Lochlands Viaduct, Larbert, Stirlingshire FK5 3NN
Tel 01324 556610 Fax 01324 552970
FRANK H DALE LTD (D E F 1 Q4)

Mill Street, Leominster, Herefordshire HR6 8EF
Tel 01568 612212 Fax 01568 619401
ASME ENGINEERING LTD

Asme House, 788 Kenton Lane, Harrow, Middlesex HA3 6AG
Tel 0208 954 0028 Fax 0208 954 0036
Adey Steel Ltd

Falcon Industrial Park, Meadow Lane,
Loughborough, Leics LE11 1HL
Tel 01509 556677 Fax 01509 828639
You can find email and

website addresses for all
these companies at
www.steelconstruction.org
LEONARD ENGINEERING (BALLYBAY) LTD

St Patricks Street, Ballybay, Co Monaghan, Republic of Ireland
Tel 00 353 42 974 1099 Fax 00 353 42 974 1001
LOWE ENGINEERING (MIDLAND) LTD
Bramshall Industrial Estate, Stone Road,
Bramshall, Staffs ST14 8SH
Tel 01889 563244 Fax 01889 563554
M&S Engineering Ltd
East Road, Lowthertown, Eastriggs DG12 6TD
Tel 01461 40111 Fax 01461 40542
TERENCE MCCORMACK LTD (Q1)
17 Camlough Rd, Newry BT35 6JS
Tel 028 3026 2261 Fax 028 3026 8177
MALDON MARINE LTD
Unit 16, West Station Ind. Est., Spital Road, Maldon, Essex CM9 6TW
Tel 01621 859000 Fax 01621 858935
HARRY MARSH (ENGINEERS) LTD
The Parade, Hendon, Sunderland SR2 8LT
Tel 0191 510 9797 Fax 0191 510 9798
MIDLAND STEEL STRUCTURES LTD
Golden Acres Lane, Binley, Coventry CV3 2RT
Tel 024 7644 5584 Fax 024 7645 9995
MIFFLIN CONSTRUCTION LTD (D E F H M 4)
Worcester Rd, Leominster, Herefordshire HR6 8AY
Tel 01568 613311 Fax 01568 614935
MILLTOWN ENGINEERING LTD
Garryhill, Bagenalstown, Co Carlow, Republic of Ireland
Tel 00 353 59 972 7119 Fax 00 353 59 972 7202
NEWBRIDGE ENGINEERING LTD
Tees Bay Business Park, Brenda Rd, Hartlepool TS25 2BU
Tel 01429 866722 Fax 01429 869811
NEWTON FABRICATIONS LTD
9 York Street, Ayr, Ayrshire KA8 8AN
Tel 01292 269135 Fax 01292 610258
NUSTEEL STRUCTURES LTD (B H J K L 4* Q1)
Lympne, Hythe, Kent CT21 4LR
Tel 01303 268112 Fax 01303 266098
ON SITE SERVICES (GRAVESEND) LTD (Q4)
Wharf Road, Denton, Gravesend, Kent DA12 2RU
Tel 01474 321552 Fax 01474 357778
OVERDALE CONSTRUCTION SERVICES LTD
Millers Avenue, Brynmenyn Industrial Estate, Bridgend CF32 9TD
Tel 01656 729229 Fax 01656 722101
PMS Fabrications Ltd
Thomas Lane, Burgh Road Industrial Estate,
Carlisle, Cumbria CA2 7NA
Tel 01228 599090 Fax 01228 599091
HARRY PEERS STEELWORK LTD (C E F H J K L M 2 Q1)
Elton St, Mill Hill, Bolton BL2 2BS
Tel 01204 528393 Fax 01204 362363
PENCRO STRUCTURAL ENGINEERS LTD (E F H J M 4 Q4)
Orpinsmill Road, Ballyclare, Co. Antrim BT39 0SX
Tel 028 9335 2886 Fax 028 9332 4117
QMEC LTD
Quarry Road, Bolsover, Nr Chesterfield S44 6NT
Tel 01246 822228 Fax 01246 827907
RSL (SOUTH WEST) LTD (E F H M 6)
Millfield Industrial Est., Chard, Somerset TA20 2BB
Tel 01460 67373 Fax 01460 61669
BCSA Members
JOHN REID & SONS (STRUCSTEEL) LTD (A 1)

296-298 Reid Sreet, Christchurch BH23 2BT
Tel 01202 483333 Fax 01202 499763
BARNSHAW PLATE BENDING CENTRE LTD (Q2)

Corporation Rd, Audenshaw, Manchester M34 5LR
Tel 0161 320 9696 Fax 0161 335 0918
REMNANT ENGINEERING LTD

Unit 161, Lydney Industrial Estate,
Harbour Road, Lydney, Gloucestershire GL15 4EJ
Tel 01594 841160 Fax 01594 843208
BARNSHAW SECTION BENDERS LTD (Q2)

Structural Division, Anchor Lane, Coseley,
Bilston, West Midlands WV14 9NE
Tel 01902 880848 Fax 01902 880125
RIPPIN LTD
Thistle Ind. Est., Church Street, Cowdenbeath KY4 8LP
Tel 01383 518610 Fax 01383 513099
Cellbeam Ltd
Unit 516, Thorp Arch Estate, Wetherby, West Yorkshire LS23 7DB
Tel 01937 840614 Fax 01937 840608
ROBERTS ENGINEERING
16D Bergen Way, Sutton Fields Ind. Est., Hull HU7 0YQ
Tel 01482 838240 Fax 01482 830697
COMPOSITE PROFILES UK Ltd

15 Moor Road, Broadstone, Dorset BH18 8AZ
Tel 01202 659237 Fax 01202 659288
J. ROBERTSON & CO LTD (L M S 9)

Mill Lane, Walton-on-Naze CO14 8PE
Tel 01255 672855 Fax 01255 850487
CORUS PANELS & PROFILES (Q1)

Severn Drive, Tewkesbury Business Park,
Tewksbury, Glos GL20 8TX
Tel 01684 856600 Fax 01684 856601
ROBINSON CONSTRUCTION (A 0 Q1)

Wincanton Close, Ascot Drive, Industrial Estate, Derby DE24 8NJ
Tel 01332 574711 Fax 01332 861401
ROWECORD ENGINEERING LTD (A B 0 Q1)
Neptune Works, Uskway, Newport, South Wales NP20 2SS
Tel 01633 250511 Fax 01633 253219
ROWEN STRUCTURES LTD (A 1)
Fulwood Road (South), Sutton-in-Ashfield, Notts NG17 2JW
Tel 01623 558558 Fax 01623 440404
S H STRUCTURES LTD
Moor Lane Trading Estate, Sherburn-in-Elmet,
North Yorkshire LS25 6ES
Tel 01977 681931 Fax 01977 681930
SELWYN CONSTRUCTION ENGINEERING LTD
Tarron Road, Tarron Industrial Estate,
Moreton, Wirral CH46 4TU
Tel 0151 678 0236 Fax 0151 678 8959
SEVERFIELD-REEVE STRUCTURES LTD (A 0 Q2)
Dalton Airfield Industrial Estate, Dalton,
Thirsk, North Yorkshire YO7 3JN
Tel 01845 577896 Fax 01845 577411
SHIPLEY FABRICATIONS LTD
Maddocks Park, Ancaster, Grantham, Lincs NG32 3RT
Tel 01400 231115 Fax 01400 231220
SIAC BUTLERS STEEL LTD (C D E F H J N 0 Q4)
Lea Road, Portarlington, Co Laois, Republic of Ireland
Tel 00 353 57 8623305 Fax 00 353 57 8623207
SIAC TETBURY STEEL LTD (D E F H 3 Q1)
London Rd, Tetbury, Gloucs GL8 8HH
Tel 01666 502792 Fax 01666 504246
SNASHALL STEEL FABRICATIONS CO LTD
Pulham Business Park, Pulham, nr Dorchester, Dorset DT2 7DX
Tel 01300 345588 Fax 01300 345533
FLI STRUCTURES
Waterwells Drive, Waterwells Business Park,
Gloucester GL2 2AA
Tel 01452 722200 Fax 01452 722244
FABSEC LTD
1st Floor, Unit 3, Calder Close,
Calder Business Park, Wakefield WF4 3BA
Tel 0845 094 2530 Fax 0845 094 2533
HISPAN LTD
Ayton Rd, Wymondham NR18 0RD
Tel 01953 603081 Fax 01953 607842
KINGSPAN STRUCTURAL PRODUCTS (Q4)
Sherburn, Malton, N. Yorkshire YO17 8PQ
Tel 01944 712000 Fax 01944 710555
RICHARD LEES STEEL DECKING LTD
Moor Farm Rd West, The Airfield, Ashbourne,
Derbyshire DE6 1HD
Tel 01335 300999 Fax 01335 300888
MSW STRUCTURAL FLOOR SYSTEMS
Acton Grove, Long Eaton, Nottingham NG10 1FY
Tel 0115 946 2316 Fax 0115 946 2278
MSW (UK) LTD
16 Jacobean House, 1 Glebe Street, East Kilbride G74 7LY
Tel 01355 232266 Fax 01355 266766
METSEC PLC (Q2)
Broadwell Rd, Oldbury, West Mids B69 4HE
Tel 0121 601 6000 Fax 0121 601 6181
NORTHERN STEEL DECKING LTD
Aston House, Campbell Way, Dinnington, Sheffield S25 3QD
Tel 01909 550054 Fax 01909 569443
NORTHERN STEEL DECKING SCOTLAND LTD
23 Mary Street, Johnston, Renfrewshire, PA5 8BT
Tel 01505 328830 Fax 01505 331201
VOORTMAN UK LTD
Unit 5, Mercian Park, Felspar Rd,
Amington Rd, Tamworth B77 4DP
Tel 01827 63300 Fax 01827 65565
Barrett Steel Services Ltd

Barrett House, Cutler Heights Lane,
Dudley Hill, Bradford BD4 9HU
Tel 01274 682281 Fax 01274 651205
PROTECTIVE SYSTEMS
BROWN MCFARLANE LTD

Ladywell Works, New Century Street, Hanley,
Stoke-on-Trent ST1 5QH
Tel 01782 289909 Fax 01782 289804
FORWARD PROTECTIVE COATINGS LTD

Vernon St., Shirebrook, Mansfield, Notts NG20 8SS
Tel 01623 748323 Fax 01623 748730
INTERNATIONAL PAINT LTD
Protective Coatings, Stoneygate Lane,
Felling, Gateshead NE10 0JY
Tel 0191 469 6111 Fax 0191 495 0676
LEIGHS PAINTS
Tower Works, Kestor Street, Bolton BL2 2AL
Tel 01204 521771 Fax 01204 382115
PPG PROTECTIVE & MARINE COATINGS
Micro House, Station Approach, Wood Street North,
Alfreton, Derbyshire DE55 7JR
Tel: 01773 837300 Fax: 01773 837302
SITE COAT SERVICES LTD
Unit 11, Old Wharf Road, Grantham, Lincolnshire NG31 7AA
Tel 01476 577473 Fax 01476 577642
JACK TIGHE LTD
Kirk Sandall Ind. Est., Kirk Sandall, Doncaster DN3 1QR
Tel 01302 880360 Fax 01302 880370
WEDGE GROUP GALVANIZING
c/o Worksop Galvanizing Claylands Avenue,
Worksop, Notts S81 7BQ
Tel 01909 486384 Fax 01909 482540
WELLS PROTECTIVE COATINGS LTD
Unit 21, Wright Business Park, Carr Hill, Doncaster DN4 8DE
Tel 01302 733611 Fax 01302 733639
SAFETY SYSTEMS
Cellshield
Unit 516, Thorp Arch Estate, Wetherby, West Yorkshire LS23 7DB
Tel 01937 840600 Fax 01937 840601
Combisafe International Ltd
Unit 1, Zone A, Cheaney Drive, Grange Park,
Northampton NN4 5FB
Tel 01604 660600 Fax 01604 662960
STRUCTURAL SECTIONS LTD (Q1)

123 West Bromwich Street, Oldbury, West Midlands B69 3AZ
Tel 0121 555 1342 Fax 0121 555 1341
Alternative Steel Co Ltd

Dobson Park Way, Ince, Wigan WN2 2DY
Tel 01942 610601 Fax 01942 821999
TAYLOR & RUSSELL LTD

Stonebridge Mill, Longridge PR3 3AQ
Tel 01772 782295 Fax 01772 785341
STUDWELDERS LTD
Millennium Hse, Severn Link Distribution Centre, Newhouse Farm
Ind Est, Chepstow, Monmouthshire NP16 6UN
Tel 01291 626048 Fax 01291 629979
ASD metal services EDINBURGH

24 South Gyle Crescent, Edinburgh EH12 9EB
Tel 0131 459 3200 Fax 0131 459 3266
THE AA GROUP LTD (C D E F H M 5)

Priorswood Place, East Pimbo, Skelmersdale, Lancs WN8 9QB
Tel 01695 50123 Fax 01695 50133
The Steel People Ltd
Unit 3E, Priory Park, Mills Road, Aylesford, Kent ME20 7PP
Tel 01622 715900 Fax 01622 715905
TRADITIONAL STRUCTURES LTD (D E F H J K M N 4* Q1)
Findel Works, Landywood Lane, Cheslyn Hay,
Walsall, West Midlands WS6 7AJ
Tel 01922 414172 Fax 01922 410211
PADDY WALL & SONS
Waterford Road Business Park,Waterford Road,
New Ross, Co Wexford, Republic of Ireland
Tel 00 353 51 420 515 Fax 00 353 51 420 516
WARLEY CONSTRUCTION COMPANY LTD (F L 7)
Swinborne Road, Burnt Mills Industrial Estate,
Basildon, Essex SS13 1LD
Tel 01268 726060 Fax 01268 725285
WALTER WATSON LTD (Q4)
Greenfield Works, Ballylough Rd, Castlewellan,
Co Down BT31 9JQ
Tel 028 4377 8711 Fax 028 4377 2050
WATSON STEEL STRUCTURES LTD (A B 0 Q1)
Lostock Lane, Bolton BL6 4BL
Tel 01204 699999 Fax 01204 694543
WESTBURY PARK ENGINEERING LTD (Q4)
Brook Lane, Westbury, Wilts BA13 4ES
Tel 01373 825500 Fax 01373 825511
WESTOK LTD
Horbury Junction Ind Est, Horbury Junction, Wakefield WF4 5ER
Tel 01924 264121 Fax 01924 280030
WIG ENGINEERING LTD
Barnfield, Akeman Street, Chesterton, Oxon OX26 1TE
Tel 01869 320515 Fax 01869 320513
H. YOUNG STRUCTURES LTD (C E F H J N 6)
Ayton Road, Wymondham, Norfolk NR18 0RD
Tel 01953 601881 Fax 01953 607842
ASSOCIATE MEMBERS
STRUCTURAL COMPONENTS
ALBION SECTIONS LTD (Q4)
Albion Rd, West Bromwich,West Midlands B70 8BD
Tel 0121 553 1877 Fax 0121 553 5507
AYRSHIRE METAL PRODUCTS (DAVENTRY) LTD (Q2)
Royal Oak Way, Daventry NN11 5NR
Tel 01327 300990 Fax 01327 300885
COMPUTER SOFTWARE
COMPUTER SERVICES CONSULTANTS (UK) LTD
Yeadon House, New St, Pudsey, Leeds, LS28 8AQ
Tel 0113 239 3000 Fax 0113 236 0546
RAM INTERNATIONAL (EUROPE) LTD
4 Woodside Place, Glasgow G3 7QF
Tel 0141 353 5168 Fax 0141 353 5112
STEEL PROJECTS UK LTD
6 Highfield Drive, Gildersome, Leeds LS27 7DW
Tel: 0113 253 2171 Fax: 0113 252 8781
TEKLA (UK) LTD
Tekla House, Cliffe Park Way, Morley, Leeds LS27 0RY
Tel 0113 307 1200 Fax 0113 307 1201
DESIGN SERVICES
ARRO-CAD LTD
Bretby Business Park, Ashby Road,
Bretby, Burton-on-Trent DE15 0YZ
Tel 01283 558206 Fax 01283 558207
Development Design Detailing Services Ltd
171 Bradshawgate, Bolton, Lancs BL2 1BH
Tel 01204 396606 Fax 01204 396634
STEEL PRODUCERS
CORUS CONSTRUCTION & INDUSTRIAL
Frodingham House, PO Box 1,
Brigg Road, Scunthorpe DN16 1BP
Tel 01724 404040 Fax 01724 404229
CORUS TUBES
PO Box 101, Weldon Rd, Corby, Northants NN17 SUA
Tel 01536 402121
MANUFACTURING EQUIPMENT
FICEP (UK) LTD
10 The Courtyards, Victoria Park, Victoria Road, Leeds LS14 2LB
Tel 0113 265 3921 Fax 0113 265 3913
KALTENBACH LTD
6-8 Brunel Road, Bedford MK41 9TJ
Tel 01234 213201 Fax 01234 351226
PEDDINGHAUS CORPORATION UK LTD
Unit 6, Queensway Link, Stafford Park 17, Telford TF3 3DN
Tel 01952 200377 Fax 01952 292877
Rsler UK
Unity Grove, Knowsley Business Park,
Prescot, Merseyside L34 9GT
Tel 0151 482 0444 Fax 0151 482 4444
CORUS BRISTOL
Badminton Rd Trading Est., Yate,Bristol BS37 5JU
Tel 01454 315314 Fax 01454 325181
CORUS DARTFORD
Farnigham Road Station, South Darenth,nr Dartford DA4 9LD
Tel 01322 227272 Fax 01322 864893
CORUS NEWCASTLE
Chainbridge Road Industrial Estate,
Blaydon-on-Tyne, Tyne & Wear NE21 5SS
Tel 0191 414 2121 Fax 0191 414 2210
CORUS STOURTON
Wakefield Rd, Stourton, Leeds LS10 1AY
Tel 0113 276 0660 Fax 0113 272 4418
CORUS WEDNESFIELD
The Steelpark, Steelpark Way, Wednesfield,
Wolverhampton WV11 3BR
Tel 01902 484000 Fax 01902 484288
National Tube Stockholders Ltd

Dalton Industrial Estate, Dalton, Thirsk, North Yorkshire YO7 3HE
Tel 01845 577440 Fax 01845 577165
STEEL STOCKHOLDERS
STEEL & ROOFING SYSTEMS LTD

Kilkenny Road, Castlecomer, Co Kilkenny, Republic of Ireland
Tel 00 353 56 444 1855 Fax 00 353 56 444 1860
CORUS BLACKBURN
Unit 5, Walker Road, Blackamoor Road,
Guide, Blackburn BB1 2QE
Tel 01254 55161 Fax 01254 670836
LASERTUBE CUTTING
Unit 8, Autobase Industrial Estate, Tipton Road,
Tividale, West Midlands B69 3HU
Tel 0121 601 5000 Fax 0121 601 5001
TRAILERPAL LTD
Cartmel Drive, Harlescott Industrial Estate,
Shrewsbury, Shropshire SY1 3TB
Tel 01743 446666 Fax 01743 442448
ADVANCED STEEL SERVICES LTD
South Ribble Industrial Estate, Capitol Way,
Preston, Lancs PR5 4AJ
Tel 01772 259822 Fax 01772 259561
CORUS BELLSHILL
Mossend Engineering Works, Unthank Road, Bellshill,
North Lanarkshire ML4 1DJ
Tel. 01698 748424. Fax 01698 747191
INTERPIPE UK LTD
14-16 High Street, Ironbridge, Shropshire TF8 7AD
Tel: 0845 226 7007 Fax: 01952 434017
EASI-EDGE
Ollerton Rd, Tuxford, Newark, Notts NG22 OPQ
Tel 01777 870901 Fax 01777 872047
STRUCTURAL METAL DECKS LTD

The Outlook, Ling Road, Tower Park, Poole, Dorset BH12 4PY
Tel 01202 718898 Fax 01202 714980
SOUTH DURHAM STRUCTURES LTD

South Church Enterprise Pk, Dovecot Hill,
Bishop Auckland, Co. Durham DL14 6XR
Tel 01388 777350 Fax 01388 775225
Celtic Steel Services

Caerphilly Road, Ystrad Mynach, Mid Glamorgan CF82 6EP
Tel 01443 812181 Fax 01443 812558
Portway Steel Services

The Stables, Brook Farm, Westerleigh, Bristol BS37 8QH
Tel 01454 311442 Fax 01454 311445
Rainham Steel Co Ltd
Kathryn House, Manor Way, Rainham, Essex RM13 8RE
Tel 01708 522311 Fax 01708 559024
ASD metal services BODMIN

Unit 13, Cooksland Ind. Est., Bodmin, Cornwall PL31 2PZ
Tel 01208 77066 Fax 01208 77416
ASD metal services LONDON
Thames Wharf, Dock Road, London E16 1AF
Tel 020 7476 9444 Fax 020 7476 0239
South Park Steel Services

Thomson House, Faraday Street
Birchwood Park, Warrington WA3 6GA
Tel 01925 817000 Fax 01925 818844
South Park Steel Services
South Park Road, South Park Industrial Estate,
Scunthorpe DN17 2BY
Tel 01724 810810 Fax 01724 810081
Steelstock (Burton on Trent) Ltd
Ryder Close, Cadley Hill Road, Swadlincote, Derbyshire DE11 9EU
Tel 01283 226161 Fax 01283 550406
ASD metal services CARLISLE

Unit C, Earls Way, Kingsmoor Park Central,
Kingstown, Cumbria CA6 4SE
Tel 01228 674766 Fax 01228 674197
ASD metal services HULL
Gibson Lane, Melton, North Ferriby, E. Yorkshire HU14 3HX
Tel 01482 633360 Fax 01482 633370
ASD metal services GRIMSBY
Estate Road No. 5, South Humberside Industrial Estate,
Grimsby DN31 2TX
Tel 01472 353851 Fax 01472 240028
ASD metal services BIDDULPH
PO Box 2, Tunstall Road, Biddulph, Stoke-on-Trent, Staffs ST8 6JZ
Tel 01782 515152 Fax 01782 522240
Struthers & Carter Ltd

Erimus Works, Valletta Street, Hedon Road, Hull HU9 5NU
Tel 01482 795171 Fax 01482 786186
STRUCTURAL FASTENERS
ANDREWS FASTENERS LTD
Latchmore Park, Latchmore Road, Leeds LS12 6DN
Tel 0113 246 9992 Fax 0113 243 6463
BAPP GROUP LTD
Unit 15, Darton Business Park, Darton,
Barnsley, South Yorkshire S75 5NQ
Tel 01226 383824 Fax 01226 390004
COOPER & TURNER LTD
Sheffield Road, Sheffield S9 1RS
Tel 0114 256 0057 Fax 0114 244 5529
ASD metal services DURHAM

Drum Road, Drum Industrial Estate,
Chester-le-Street, Co. Durham DH2 1ST
Tel 0191 492 2322 Fax 0191 410 0126
GWS Engineering & INDUSTRIAL SUPPLIES LTD

Link Road, Poulavone, Ballincollig, Co Cork, Republic of Ireland
Tel 00 353 21 4875 878 Fax 00 353 21 4875 882
ASD metal services CARDIFF

East Moors Road, Cardiff CF1 5SP
Tel 029 2046 0622 Fax 029 2049 0105
Lindapter International
Lindsay House, Brackenbeck Road, Bradford BD7 2NF
Tel 01274 521444 Fax 01274 521130
ASD metal services STALBRIDGE

Station Rd, Stalbridge, Dorset DT10 2RW
Tel 01963 362646 Fax 01963 363260
TENSION CONTROL BOLTS LTD

Whitchurch Business Park, Shakespeare Way,
Whitchurch, Shropshire SY13 1LJ
Tel 01948 667700 Fax 01948 667744
ASD metal services NORFOLK

Hamlin Way, Kings Lynn, Norfolk PE30 4LQ
Tel 01553 761431 Fax 01553 692394
ASD metal services EXETER
Sidmouth Road, Clyst St Mary, Exeter EX5 1AD
Tel 01395 233366 Fax 01395 233367
CORPORATE MEMBERS
ASD metal services DAVENTRY

Royal Oak Ind. Est., Daventry, Northants NN11 5QQ
Tel 01327 876021 Fax 01327 87612
ASD metal services TIVIDALE
Tipton Road, Tividale, Oldbury, West Midlands B69 3HU
Tel 0121 520 1231 Fax 0121 520 5664
BALFOUR BEATTY
POWER NETWORKS LTD
Tel 01332 661491
GRIFFITHS & ARMOUR
Tel 0151 236 5656
HIGHWAYS AGENCY
Tel 08457 504030
AUSTIN TRUMANNS STEEL LTD

Moss Lane, Walkden, Manchester M28 5NH
Tel 0161 790 4821 Fax 0161 799 0411
ROGER POPE ASSOCIATES

Tel 01752 263636
NSC March 2008
41
SCI Members
The Steel Construction Institute develops and promotes the

effective use of steel in construction. It is an independent,
membership-based organisation. Membership is drawn from
all sectors of the construction industry; this provides beneficial
contacts both within the UK and internationally. Its corporate
members enjoy access to unique expertise and free practical
advice which contributes to their own efficiency and profitability.
They also recieve an initial free copy of most SCI publications,
and discounts on subsequent copies and on courses. Its
multi-disciplinary staff of 45 skilled engineers and architects
is available to provide technical advice to members on steel
construction in the following areas:
Technical Support for

Architects
Bridge Engineering
Building Interfaces
Civil Engineering
Codes and Standards
Composite Construction
Connections
Construction Practice
Corrosion Protection
Fabrication
Health & Safety best
practice
Information Technology
Fire Engineering
Light Steel and Modular
Construction
Offshore Hazard

Engineering
Offshore Structural Design
Piling and Foundations
Specialist Analysis
Stainless Steel
Steelwork Design
Sustainability
Vibration
Details of SCI Membership and services are available from:

Sandi Gentle, Membership Manager, The Steel Construction
Institute, Silwood Park, Ascot, Berks.
Telephone: +44 (0) 1344 636509 Fax: +44 (0) 1344 636570
Email: [email protected] Website: www.steel-sci.com
All full members of the BCSA are automatically members of the SCI. Their contact details are listed on the BCSA Members pages
Corporate Members
3E Consulting Engineers Ltd
The AA Group Ltd
A C Bacon Engineering Ltd
A Dawber Limited
A. Steadman & Son Ltd
Aberdeenshire Council
Abraham Consulting Engineers
ACE (Leicester)
AceCad Software Ltd
ACL Structures Ltd
Adams Kara Taylor Ltd
Adey Steel Ltd
ADP Consulting Engineers Ltd
Adstone Construction Ltd
Advanced Fabrications Poyle Ltd
Air Products PLC
Aker Kvaerner Projects Ltd
AKSWard
Alan Baxter & Associates
Alan Conisbee & Associates
Alan Dick & Co Ltd
Alan Johnston Partnership
Albion Sections Ltd
Alcock Lees Partnership
Allerton Engineering Ltd
Allott Bros & Leigh Ltd
Allslade Plc
AMEC Design and Management
AMECNNC
AMP Consultants
Andrew Dust Structural Engineers
Andrew Howard & Partners
The Angle Ring Company Ltd
Apex Steel Structures Ltd
Architectural Profiles Ltd
Arromax Structures Ltd
Arrow Structural Framing Sales Ltd
Arup
ASA Steel Structures Ltd
Asme Engineering Ltd
Associated Structural Design
Atkins
Atkins MSL Engineering Ltd
Atlas Ward Structures Ltd
Atlasco Constructional Engineers Ltd
AWE Plc
AWF Steel Ltd
Aylesbury Vale District Council
Ayrshire Metal Products Plc
B D Structures Limited
B W Industries Ltd
BAA Plc
Balfour Beatty Rail Projects Ltd
Ballykine Structural Engineers Ltd
Banro Sections Limited
Barnshaw Section Benders Ltd
Barrett Steel Buildings Ltd
Barretts of Aspley Ltd
Baxter Glaysher Consulting
BDS Steel Detailers
Bechtel Ltd
Benaim
Bentley Systems
Beresford Dunne Consultants Ltd
42
NSC March 2008
Bestech Systems Ltd

BHC Ltd
Billington Structures Ltd
Birmingham City Council
Black & Veatch Ltd
Blind Bolt Company
Blyth & Blyth Consulting
Bodycote Metallurgical Coatings
Bolton Priestley
Bone Steel Ltd
Border Steelwork Structures Ltd
Bourne Steel Ltd
The Brazier Holt Partnership Ltd
Bridgetown Developments Ltd
The British Constructional Steelwork
Association Ltd
British Energy Plc
British Nuclear Group
British Stainless Steel Association
Briton Fabricators Ltd
Browne Structures Ltd
Brunner Mond UK Limited
BSB Structural Ltd
Building Design Partnership
Bunyan Meyer & Partners Ltd
Buro Happold
Burroughs Stewart Associates
Butterley Ltd
BWB Consulting Ltd
C.S.C. Engineers Ltd
CADS (Computer & Design Services Ltd)
Cairnhill Structures Ltd
Caledonian Building Systems
Cameron Taylor
CampbellReith
Capita Gwent Consultancy Ltd
Capita Symonds
Cardiff County Council
Cardiff University
Carnaby Steel Structures
Carter Design Group
Cass Hayward LLP
Caunton Engineering Ltd
CB&I UK Limited
CEL International Ltd
Cheshire County Council
Chieftain Contracts Ltd
CIRIA
City University
Civil & Structural Computer Services Ltd
Clarke Bond Group Limited
Clarke Nicholls & Marcel
Clarkslegal LLP
Clegg Associates
Cleveland Bridge UK Ltd
CMF Limited
Collis Engineering Ltd
Compass Engineering Ltd
Complete Design Partnership Ltd
Composite Design Ireland LLP
Conder Structures Ltd
Conwy County Borough Council
Cordell Group Ltd
Cornwall County Council
Corus Group plc
Coventry Construction Ltd
Coventry University
Crown Structural Engineering Ltd
CSC (UK) Ltd
Cundall
Curtins Consulting Engineers
CWT Partnership
D A Green & Sons Ltd
D H Structures Ltd
D J Hartigan & Associates Ltd
Dalton Consultants
Deakin Walton Limited
Defence Estates
Denningfield Limited
Devon County Council
Devonport Management Ltd
Dewhurst Macfarlane and Partners
DGT Steel & Cladding Ltd
Discain Project Services Ltd
Dorman Long Technology Ltd
Dougall Baillie Associates
Doyle Partnership
Dundee City Council
Edmund Nuttall Ltd
Elland Steel Structures Ltd
Elliott Wood Partnership LLP
Emmett Fabrications Ltd
Engineered Offsite Limited
Engineering Solutions Partnership
Evadx Ltd
Evans & Langford LLP
Expedition Engineering Limited
F J Booth & Partners Ltd
F J Samuely & Partners Ltd
Faber Maunsell
Fabsec Ltd
Fairfield-Mabey Ltd
Fisher Engineering Ltd
Flint & Neill Partnership
Fluid Structural Engineers
Fluor Ltd
Foggo Associates Ltd
Fothergill
Frank H Dale Ltd
Galvanizers Association
Gardenwood Ltd
Gary Gabriel Associates
George Mathieson Associates
Gibbs Engineering Ltd
Gifford & Partners Ltd
Glasgow Caledonian University
Glentworth Fabrications Ltd
Glenbeigh Construction
GME Structures Ltd
Godsell Arnold Partnership Ltd
Goodwin Steel Castings Ltd
Gorge Fabrications Ltd
Graham Wood Structural Ltd
Grays Engineering (Contracts) Ltd
Green & Tempest
Gregg & Patterson (Engineers) Ltd
Grontmij
H Young Structures Ltd
Had-Fab Limited
Halcrow Group Ltd
Halcrow Yolles
Hallmason Design Ltd
Hambleton Steel Ltd
Hanson Building Products Ltd
Harley Haddow
Harold Newsome Ltd
Harry Marsh (Engineers) Ltd
Harry Peers Steelwork Ltd
Haskoning UK Limited
HBG Design Ltd
Henley Building Solutions (UK) Ltd
Henrob Limited
Henry Smith (CE) Ltd
Hescott Engineering Company Ltd
Highcliffe Court Design Ltd
High-Point Rendel
Hillcrest Structural Ltd
Hills of Shoeburyness Ltd
Hockley & Dawson Consulting
Engineers Ltd
HOP Consulting Ltd
HOSDB
HSP Consulting
Hurst Peirce & Malcolm LLP
Hyder Consulting (UK) Ltd
Imperial College London
Integer Software Limited
Inverclyde Council
J Robertson & Co Ltd
Jacobs Babtie
James Bros (Hamworthy) Ltd
James Killelea & Co Ltd
James Lupton Consultants
Jenkins & Potter
John Reid & Sons (Strucsteel) Ltd
John Wicks & Son Ltd
Jordan Pritchard Gorman
Joy Steel Structures (London) Ltd
Kellogg Brown & Root Ltd
Kenneth Brown & Partners
Kier Engineering Services
Kingspan Metl-Con Ltd
Kingston University
Knapp Hicks & Partners Ltd
The Laser Cutting Company Ltd
Leach Structural Steelwork Ltd
Leighs Paints
Leonard Cooper Ltd
Les Gooding Design Associates
Light Steel Frame Solutions Ltd*
Lindab Building Systems
Lindapter International
Light Steel Frame Solutions Ltd
Liverpool John Moores University
London Borough of Hillingdon
Lowe Engineering (Midland) Ltd
M & S Engineering Ltd
M D Fabrications Ltd
M Hasson & Sons Ltd
Mace Ltd
SCI Members
Maldon Marine Ltd

Manchester City Council
Martin Stockley Associates
Maslen Brennan Henshaw
Mason Navarro Partnership
Mech Tool Engineering Ltd
Melliss LLP
Metals Industry Skills & Performance
Metek Building Systems
Metsec Plc
Michael Barclay Partnership
Midland Steel Structures Ltd
Midland Structural Services
Mifflin Construction Ltd
Mike Curnow
Mitchell McFarlane & Partners
MJM Consulting Engineers Ltd
MLM Maddocks Lusher & Matthews
Molabolt
Morgan Est
Mott MacDonald
Mouchel Parkman Services Ltd
MSW (UK) Ltd
Napier University
Newbridge Engineering Ltd
Newton Fabrications Ltd
Nolan Associates
Norder Design Associates Limited
Nottingham Trent University
NPS North East Limited
NRM Bobrowski
Nusteel Structures Ltd
NW Structural Consultants Ltd
On Site Services (Gravesend) Ltd
Overdale Construction Services Ltd
Owen Williams Consultants
Oxford Brookes University
Pace Structures Ltd
Parsons Brinckerhoff Ltd
Paul Reading & Partners
Pell Frischmann Consultants Ltd
Pencro Structural Engineering Ltd
PEP Civil & Structures Ltd
Peter Brett Associates
Peter Taylor & Partners Ltd
Pick Everard
Pinnacle Consulting Engineers Ltd
Plandescil Ltd
PMS Fabrications Ltd
Portakabin Ltd
Portal Ltd
Powerwall Systems Limited
Price & Myers Consulting Engineers Llp
Pyper McLarnon Partnership
QMEC Ltd
Queens University Belfast
R G Parkins & Partners Ltd
RAM International (Europe) Ltd
Ramage Young Limited
Remnant Engineering Ltd
Renfrewshire Council
Richard Lees Steel Decking Ltd
Richard Wood Engineering Ltd
Rigby & Partners
Rippin Ltd
RLT Engineering Consultants Ltd
RMJM Scotland Ltd
Robert Bird & Partners
Robert Tucker Associates
Roberts Engineering
Roger Bullivant Ltd
Rowecord Engineering Ltd
Rowen Structures Ltd
Royal School of Military Engineering
RPS Burks Green
RPS Consulting Engineers
RSL (South West) Ltd
S H Structures Ltd
Scott White & Hookins
Scott Wilson Ltd
Selwyn Construction Engineering Ltd
Severfield-Reeve Structures Ltd
Sheffield City Council
Shell UK Exploration & Production
Sherwood & Casson Ltd
Shipley Fabrications Ltd
SIAC Tetbury Steel Ltd
Sir Robert McAlpine Design Group
Skanska Technology
Skidmore Owings & Merrill Inc.
SKM anthony hunts
Snashall Steel Fabrications
South Durham Structures Ltd
South Lincs Consulting Ltd
The Steel People Ltd

Stewart & Harris
Stirling Maynard & Partners
Structural Design Associates
Structural Design Partnership
Structural Metal Decks Ltd
Structural Sections Ltd
Surrey County Council
Survey Design Associates Ltd
T A Kirkpatrick & Co Ltd
Taylor & Russell Ltd
Teague & Sally Limited
Techniker Ltd
Tekla (UK) Ltd
Tension Control Bolts Ltd
Terence McCormack Ltd
Terrapin Ltd
Terrell International
Thomas Morgan & Associates
Thomasons LLP
Tony Gee & Partners LLP
TPS Consult Ltd
Traditional Structures Ltd
University of Aberdeen
University of Birmingham
University of Bolton
University of Bristol
University of Dundee
University of East London
University of Edinburgh
University of Greenwich
University of Leeds
University of Liverpool
The University of Manchester
University of Nottingham
University of Paisley
University of Plymouth
University of Portsmouth
University of Salford
University of Sheffield
University of Southampton
University of Surrey
University of the West of England
University of Wales Swansea
University of Warwick
URS Corporation Ltd
Vertex Systems
W A Fairhurst & Partners
W F Brown Associates Ltd
W S Britland & Co Ltd
Wakefield MDC Building Control
Walsh Associates
Walter Watson Ltd
Warley Construction Co Ltd
Waterman Structures Ltd
Watson Steel Structures Ltd
WCJ Engineers
Wessex Structural Services Ltd
Westbury Park Engineering Ltd
Westok Ltd
Whitbybird
White Young Green Consulting Ltd
WIG Engineering Ltd
William Haley Engineering Ltd
William Hare Ltd
William J Marshall & Partners
The Willocks Practice
Wood Boyle Partnership
Wright Associates
WSP Group
Organisations
with Member Service
Agreements with the SCI
Highways Agency
Institution of Structural Engineers
International
Corporate Members
Australia
Australian Steel Institute
Australian Steel Institute
BlueScope Steel Research
Cocciardi Pty Ltd
Belgium
Bocad Service International S A
International Iron & Steel Institute (IISI)
Staalinfocentrum - Centre Information
Acier
Brazil
Brazilian Centre of Steel Construction
(CBCA)
CODEME Engenharia S.A.
Gerdau Acominas S.A.
Universidade Federal de Ouro Preto
Universidade de Sao Paulo
USIMINAS
Canada
Canadian Institute of Steel Construction
Chile
Construcciones Y Montajes S.A
(COYMSA)
Italy
Politecnico Di Milano
Universita Degli Studi Di Trento
Kenya
David Engineering Ltd
Steel Structures Ltd
Korea
Hyundai Steel Company
Korea University
Principality of Liechtenstein
HILTI AG
Croatia
Institut Gradevinarstva Hrvatske d.d.
Egypt
Project Management Systems
Finland
HAMK University of Applied Sciences
Rautaruukki Oyj
Seinajoki Polytechnic
VTT Building and Transport
France
CTICM
Terrell International
Lithuania
Vilnius Gediminas Technical University
Malaysia
Corus Asia Ltd
Universiti Kebangsaan Malaysia (UKM)
Universiti Teknologi Malaysia
Malta
TBA Periti
The Netherlands
Bouwen met Staal
Delft University of Technology
New Zealand
Heavy Engineering Research Association
Germany
Bauen mit Stahl e.V.
Stahl + Verbundbau gmbh
Norway
Tee Consult Holding AS
Greece
Computer Control Systems SA
Democritus University of Thrace
K.Liaromatis SA
Maraveas & Associates SA
Metallostegastiki SA
Technical Chamber of Greece (TEE)
Hong Kong
Arup Group
Corus Asia Ltd
The Hong Kong Polytechnic University
WSP Asia
India
Bechtel Overseas Corporation
Institute for Steel Development & Growth
Ireland
Andrew Mannion Structural
Engineers Ltd
Barrett Mahony Consulting Engineers Ltd
Barry Kelleher & Associates
CBA Consulting Engineers
C S Pringle Consulting Engineers
Corus Ireland
Coyle Kennedy Ltd
Cronin Buckley*
DBFL Consulting Engineers Ltd
Denis OSullivan & Associates
Downes Associates
Duggan Steel
ESB International Ltd
Frank Fox & Associates
Fusion Building Solutions
Hanley Pepper Consulting Engineers
Hayes Higgins Partnership
J B Barry & Partners Limited
Jacobs Engineering
Joda Engineering Consultants
John Killian & Co Structural Engineers
Kilgallen & Partners Consulting
Engineers Ltd
Leonard Engineering (Ballybay) Ltd
McCabe Delaney
The McKenna Pearce Practice
Metcon
Michael Punch & Partners
Milltown Engineering Ltd
National University of Ireland, Galway
Nestor Kelly
Newell Roofing Products
OConnor Sutton Cronin
Oliver Russell & Associates Ltd
Paddy Wall & Sons
Pat OGorman & Associates
Project Management Ltd
RPS Consulting Engineers Ltd
SIAC Butlers Steel Ltd
Stanta Limited
Steel & Roofing Systems Ltd
T J OConnor & Associates
TOBIN Consulting Engineers
Walsh Draughting Services Ltd
Pakistan
Metecno Pakistan (Pvt) Ltd
Portugal
Universidade de Aveiro
Universidade de Coimbra Polo II
Qatar
Metalex Trading & Contracting Co. W.L.L
Romania
Altiscad SRL
Russia
Steel Construction LLC
Republic of Singapore
Corus South East Asia Pte Ltd
Jurong Engineering Ltd
LSW Consulting Engineers
Ngee Ann Polytechnic
Singapore Structural Steel Society
South Africa
Southern African Institute of Steel
Construction
Tricom Structures
Spain
In Hoc Signo Vinces, S.L.
ITEA
University of Navarra
Sweden
Lule University of Technology
Swedish Institute of Steel Construction
Turkey
CIMTAS Celik Imalat Montaj Ve
Tesisat A.S.
UMO Architecture Engineering and
Consulting Ltd Co
United Arab Emirates
Corus Middle East
Emirates Building Systems LLC
GINCO Steel L.L.C.
Techno Steel Construction Co
WSP Middle East Ltd
USA
American Institute of Steel
Construction Inc
American Iron & Steel Institute (AISI)
Corus America Inc
Epic Metals Corporation
Steel Recycling Institute
*New corporate members since last long
list in October 2007 issue
NSC March 2008
43
44
NSC March 2008

0803NSCmar08 (Euro Combination)

Uploaded by

Copyright:

Available Formats

0803NSCmar08 (Euro Combination)

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

0803NSCmar08 (Euro Combination)

Uploaded by

Copyright:

Available Formats

NEW STEEL CONSTRUCTION

MARCH 2008 VOL16 NO3

BREEAM Excellence in Sheffield

NSC March 2008

These and other

NSC March 2008

The future is..

Now in its 4th Generation with over forty years of development,

Is manufactured using a high yield steel

Kingspan design software now links to the CSC Fastrack

To register and download your free copy of the Technical

NSC March 2008

NEW STEEL CONSTRUCTION

MARCH 2008 VOL16 NO3

EDITORIAL ADVISORY BOARD

CHANGES TO THE MAILING LIST

Nick Barrett - Editor

NSC March 2008

Steel remains the competitive choice

% based on Floor Area

Steel is confirmed as the structural framing

Load Bearing Masonry

The Market for Structures Non-Residential Multi-Storey Buildings Total.

credentials in this area are being increasingly

Britains tallest free-standing artwork unveiled

Steel provides boost for new hospital

NSC March 2008

Steel looks confidently ahead

BCSA President Richard Barrett.

The steel construction sector was

than the original Act to prepare.

bridgeworks being prepared. Other

as more time promised for Eurocodes

to give more time to make that

You need a dedicated minister for

Shadow Secretary of State for

Museum of Liverpool gets iconic structure

Gary Hatton, said: We are currently

NSC March 2008

AROUND THE PRESS

NSC March 2008

Sustainability message loud and

ManuBuild prototype steel-framed,

Hotel and retail project will

Steelwork erection has begun

Corus Chief Executive Philippe

four-storey height and a range

Mark Bird, DGT Technical

Barrett Steel Buildings has announced a 10% business footprint

offer carbon neutral building products to our clients.

Wakefield city centre to get a make-over

shopping mall, leisure facilities,

herd Construction and the entire

Illustration: Hawkins Brown

Cube office for

The BCSA and The Welding &

LaserTUBE Cutting has commissioned the worlds largest

NSC March 2008

Metals leader signs skills pledge