Scribd
Upload
162 views4 pages

Appendix B: Appendix B - Vantrunk SW4, SW5 and SW6 Speedway Components

E3D

Uploaded by

cristhian
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
162 views4 pages

Appendix B: Appendix B - Vantrunk SW4, SW5 and SW6 Speedway Components

E3D

Uploaded by

cristhian
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

APPENDIX B

Appendix B Vantrunk SW4, SW5 and SW6 Speedway Components


Speedway Cable Ladder
Speedway Cable ladder is available in standard widths of 150mm, 300mm, 450mm, 600mm, 750mm, 900mm
and 1050mm. Other widths from 100mm to 1500mm in 50mm increments are available to order. The
Speedway Cable ladder is available in standard lengths of 3m and 6m. The Speedway cable ladder is supplied
with standard wall gauges of 1.5mm for SW4 and 2.0mm for SW5 and SW6.
The Speedway cable ladder comes in three finishes:
G

Galvanised Finish

SS

Stainless Steel

XG

Deep Galvanised Finish

Speedway SW4 Cable Ladder


Medium duty ladder for general purpose applications.

Copyright 2013
AVEVA Solutions Limited and its subsidiaries.
All rights reserved.

www.aveva.com
127

AVEVA Everything3D (2.1)


Cableway & Cable Modelling TM-1815
Speedway SW5 Cable Ladder
Heavy duty ladder suitable for longer spans for general purpose application.

Speedway SW6 Cable Ladder


Extra heavy duty ladder with deeper cable filling capacity, suitable for long span applications.

Speedway Flat Elbows

Copyright 2013
AVEVA Solutions Limited and its subsidiaries.
All rights reserved.

www.aveva.com
128

AVEVA Everything3D (2.1)


Cableway & Cable Modelling TM-1815
Speedway flat elbows (FE) are designed to create
fixed angular coplanar connections between
horizontal cable runs (cable ladder installed in
horizontal plane) and vertical cable runs (cable
ladder installed in vertical plane). Speedway flat
elbows are available in widths from 150mm to
1050mm as standard.
Speedway flat elbows are available with angles of
30, 45, 60 & 90 as standard. Speedway flat
elbows are available with standard radii of 300mm,
450mm, 600mm, 750mm, 900mm, 1050mm &
1200mm.
Each radiused side wall has a 75mm straight
section at each end to facilitate connection to
Speedway straight ladder.
Speedway Inside / Outside risers
Speedway inside risers (IR) and outside risers (OR)
are designed to create fixed angular non-coplanar
connections between cable runs and can be used in
both vertical and horizontal orientations.
Speedway inside risers (or vertical inside bends)
create internal changes in direction; outside risers
(or vertical outside bends) create external changes
in direction.
Speedway risers are available in widths from
150mm to 1050mm as standard. Speedway risers
are available with angles of 30, 45, 60, & 90 and
in standard radii of 300mm, 450mm, 600mm,
750mm, 900mm, 1050mm & 1200mm.

Speedway Equal / Unequal Tees


Speedway equal tees (ET) and unequal tees (UET)
are designed to create perpendicular coplanar
connections between horizontal cable runs (ladder
installed in horizontal plane) and vertical cable runs
(ladder installed in vertical plane).
Speedway tees are available in widths from 150mm
to 1050mm as standard. Speedway tees are
available with standard radii of 300mm, 450mm,
600mm, 750mm, 900mm, 1050mm & 1200mm.
Each radiused side wall has a 75mm straight section
at each end to facilitate connection to straight
ladder.
Speedway Crosses

Copyright 2013
AVEVA Solutions Limited and its subsidiaries.
All rights reserved.

129

www.aveva.com

AVEVA Everything3D (2.1)


Cableway & Cable Modelling TM-1815
Speedway crosses (C) are designed to create
intersecting
coplanar
connections
between
horizontal cable runs (ladder installed in horizontal
plane) and vertical cable runs (ladder installed in
vertical plane).
Speedway crosses are available in widths from
150mm to 1050mm as standard. Speedway crosses
are available with standard radii of 300mm, 450mm,
600mm, 750mm, 900mm, 1050mm & 1200mm.
Each radiused side wall has a 75mm straight section
at each end to facilitate connection to Speedway
straight ladder
Speedway Reducers
Speedway reducers are used to create coplanar
reductions in widths between straight ladders and
straight ladder & fittings of the same ladder type,
fulfilling the same role as abrupt reducers and
short/long adjustable couplers but using a purposemade fitting capable of self-support as part of a
cable run.
Speedway straight reducers (RS reducer straight)
are used to create a concentric reduction, having
an equal width reduction along both sides. Left
hand reducers (RL reducer left) and right hand
reducers (RR reducer right) are used to create
offset reductions to suit particular installation
requirements. Left hand reducers have the width
reduction on the left when viewed from the primary
width. Right hand reducers have the width
reduction on the right when viewed from the primary
width.
Speedway reducers are available for widths of 150mm to 1050mm as standard. The widths of the Speedway
reducer are measured along the length of the two rungs. These measurements ensure that the Speedway
reducer has an exact width to match the Speedway straight ladder.
The Speedway reducer has an overall length of 500mm irrespective of ladder type and width reduction.

Copyright 2013
AVEVA Solutions Limited and its subsidiaries.
All rights reserved.

130

www.aveva.com

You might also like