Scribd
Upload
1K views2 pages

AMB4520R0

This document provides specifications for the AMB4520R0 dual-beam antenna from Huawei, including: - Electrical specifications such as operating frequency range, polarization, gain, beamwidth, impedance, and more. - Mechanical specifications like antenna dimensions, weight, wind load ratings, and connector information. - Integrated Remote Electrical Tilt (RET) specifications including protocol support, power requirements, adjustment time, and connector pinout. - Includes reference pattern samples and notes on proper installation requirements.

Uploaded by

Nicola Leonardo Vilardo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views2 pages

AMB4520R0

This document provides specifications for the AMB4520R0 dual-beam antenna from Huawei, including: - Electrical specifications such as operating frequency range, polarization, gain, beamwidth, impedance, and more. - Mechanical specifications like antenna dimensions, weight, wind load ratings, and connector information. - Integrated Remote Electrical Tilt (RET) specifications including protocol support, power requirements, adjustment time, and connector pinout. - Includes reference pattern samples and notes on proper installation requirements.

Uploaded by

Nicola Leonardo Vilardo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

AMB4520R0

2MX-1710-2690-33-20.5i-M-R
EasyRET Dual-beam Antenna with 2 Integrated RCUs - 1.4m

Antenna Specifications
Electrical Properties
1710 - 2690
Frequency range (MHz)
1710 - 1990

1920 - 2200

Polarization

2200 - 2490

2490 - 2690

+45 , -45
0 - 10 , continuously adjustable

Electrical downtilt ()
at mid Tilt

19.2

19.7

20.0

20.2

19.0 0.6

19.5 0.6

19.8 0.5

20.0 0.8

> 17

> 17

> 17

> 17

Horizontal 3dB beam width ()

34 2.1

31 2.3

29 0.5

27 1.0

Vertical 3dB beam width ()

6.4 0.5

5.9 0.4

5.1 0.2

4.7 0.3

25

23

Gain (dBi)
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)

VSWR

< 1.5
30

Horizontal beam centers ()

27
Same beam: 28

Cross polar isolation (dB)


Front to back ratio, 30 (dB)
Cross polar ratio (dB)

> 32

> 32

> 32

> 32

> 20

> 20

> 22

> 22

Max. power per input (W)

250 (at 50 ambient temperature)

Intermodulation IM3 (dBc)

-153 (2 x 43 dBm carrier)

Impedance ()

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet in XML format is available.
106

Mechanical Properties
Antenna dimensions (H x W x D) (mm)

1468 x 349 x 166

Packing dimensions (H x W x D) (mm)

1870 x 415 x 240

Antenna weight (kg)

18.5

Clamps weight (kg)

3.0 (2 units)

Antenna packing weight (kg)

29.5 (Included clamps)

Radome material

Fiberglass

Radome colour

Light grey
-40 .. +65

Operational temperature ()

Frontal:
500 (at 150 km/h)
Lateral:
165 (at 150 km/h)
Rear side: 530 (at 150 km/h)

Wind load (N)


Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

4 x 7/16 DIN Female

Connector position

Bottom

Accessories
Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0C01

Mechanical downtilt: 0 - 16

2.1 kg

1 (Separate packing)

1286

50 - 115

1468

Mast diameter supported (mm)

AMB4520R0
2MX-1710-2690-33-20.5i-M-R
EasyRET Dual-beam Antenna with 2 Integrated RCUs - 1.4m

Integrated RET Specifications


Properties
RET type

Integrated RET

RET protocols*

AISG 2.0 / 3GPP

Input voltage range (V)

10 - 30 DC

Power consumption (W)

< 5 (motor activated, 12V)


< 0.5 (stand by, 12V)

Adjustment time (full range) (s)

< 65 (typically, depending on antenna type)


2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female

RET connector
Pin assignment according AISG

DC

n/c

RS-485B

n/c

RS-485A

DC

DC return

n/c

3 (10/350 s)
10 (8/20 s)

Lightning protection (kA)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function,
contact Huawei before system installation.

Standards: UL 60950-1 (Safety), UL 60950-22 (Safety Equipment installed outdoor), EN 55022 (Emission),
EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM

Integrated RET S/N:

HWMxxx...y
HWMxxx.yy

y - Yellow

Pattern sample for reference

1710 - 2690 MHz


(yy-30)

1710 - 2690 MHz


(y+30)

NOTE

1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
requirements described in the antenna installation guide.
Huawei Technologies Co., Ltd.

Bantian, Longgang District, Shenzhen 518129, P.R.China

Any previous datasheet issues become invalid.

www.huawei.com/antenna
Issue: 2016-01-29

You might also like