Scribd Logo
Upload

Welcome to Scribd!

  • 416 views

    Power Supply Current Limiter Circuit

    Uploaded by

    nassim
    This document summarizes a simple power supply current limiter circuit that uses two diodes and a resistor. The circuit places a sense resistor in series with the output pass transistor. When the current increases, the voltage across the resistor increases until it reaches the turn on voltage of the diodes. This causes the diodes to conduct and limit the current drawn by pulling the base voltage of the pass transistor down. This simple design provides overcurrent protection with few components.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Power Supply Current Limiter Circuit

    Uploaded by

    nassim
    416 views2 pages
    This document summarizes a simple power supply current limiter circuit that uses two diodes and a resistor. The circuit places a sense resistor in series with the output pass transistor. When the current increases, the voltage across the resistor increases until it reaches the turn on voltage of the diodes. This causes the diodes to conduct and limit the current drawn by pulling the base voltage of the pass transistor down. This simple design provides overcurrent protection with few components.

    Original Description:

    Power Supply Current Limiter Circuit

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes a simple power supply current limiter circuit that uses two diodes and a resistor. The circuit places a sense resistor in series with the output pass transistor. When the current increases, the voltage across the resistor increases until it reaches the turn on voltage of the diodes. This causes the diodes to conduct and limit the current drawn by pulling the base voltage of the pass transistor down. This simple design provides overcurrent protection with few components.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    416 views2 pages

    Power Supply Current Limiter Circuit

    Uploaded by

    nassim
    This document summarizes a simple power supply current limiter circuit that uses two diodes and a resistor. The circuit places a sense resistor in series with the output pass transistor. When the current increases, the voltage across the resistor increases until it reaches the turn on voltage of the diodes. This causes the diodes to conduct and limit the current drawn by pulling the base voltage of the pass transistor down. This simple design provides overcurrent protection with few components.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    Power supply current limiter circuit

    - a simple circuit for a power supply current limiter using two diodes and a resistor
    In any power supply there is always the risk that the output will experience a short circuit. Accordingly
    it is necessary to protect the power supply from damage under these circumstances. There are a
    number of circuits that can be used for power supply protection, but one of the simplest circuits uses
    just two diodes and an additional resistor.
    The circuit for the power supply current limiter uses a sense resistor placed in series with the emitter
    of the output pass transistor. Two diodes placed between the output of the circuit and the base of the
    pass transistor provide the current limiting action. When the circuit is operating within its normal
    operating range a small voltage exists across the series resistor. This voltage plus the base emitter
    voltage of the transistor is less than the two diode junction drops needed to turn on the two diodes to
    allow them to conduct current. However as the current increases so does the voltage across the
    resistor. When it equals the turn on voltage for a diode the voltage across the resistor plus the base
    emitter junction drop for the transistor equals two diode drops, and as a result this voltage appears
    across the two diodes, which start to conduct. This starts to pull the voltage on the base of the
    transistor down, thereby limiting the current that can be drawn.

    Basic power supply current limiting circuit


    The circuit of this diode current limiter for a power supply is particularly simple. The value of the series
    resistor can be calculated so that the voltage across it rises to 0.6 volts (the turn on voltage for a
    silicon diode) when the maximum current is reached. However it is always best to ensure that there is
    some margin in hand by limiting the current from the simple power supply regulator before the
    absolute maximum level is reached.

    Use in other circuits


    The same simple diode form of current limiting may be incorporated into power supply circuits that
    use feedback to sense the actual output voltage and provide a more accurately regulated output. If
    the output voltage sense point is taken after the series current sensing resistor, then the voltage drop
    across this can be corrected at the output.

    Power supply circuit with feedback and current limiting


    This circuit gives far better regulation than the straight emitter follower regulator. Also voltage drops
    in the series current limit sense resistor can be accounted for provided that there is sufficient voltage
    drop across the series pass transistor in the power supply circuit. Finally the output voltage can be
    adjusted to give the required value using the variable resistor.

    Summary
    The diode form of current limiting can be incorporated into a power supply circuit very easily.
    Additionally it is cheap and convenient. However if superior performance is needed than a
    transistorised form of current limit may be used. This gives a sharper limiting that is more suitable for
    more exacting power supply requirements.

    You might also like