Scribd Logo
Upload

Welcome to Scribd!

  • 209 views

    Design Criteria C.tech Basin

    Uploaded by

    Vasanthakumar
    This document provides design criteria for the structural design of C-Tech basins for a 55 MLD sewage treatment plant in Nellore, India. The basins will use C-Tech technology and include four basins each measuring 39,500mm x 41,000mm x 5,000mm along with decanters. The document outlines the design philosophy, criteria, loads, analysis and codes used to design the reinforced concrete retaining walls, baffle walls, and base slab to withstand water pressures from the basins.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Design Criteria C.tech Basin

    Uploaded by

    Vasanthakumar
    209 views6 pages
    This document provides design criteria for the structural design of C-Tech basins for a 55 MLD sewage treatment plant in Nellore, India. The basins will use C-Tech technology and include four basins each measuring 39,500mm x 41,000mm x 5,000mm along with decanters. The document outlines the design philosophy, criteria, loads, analysis and codes used to design the reinforced concrete retaining walls, baffle walls, and base slab to withstand water pressures from the basins.

    Original Description:

    Design Criteria c.tech Basin

    Original Title

    Design Criteria c.tech Basin

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides design criteria for the structural design of C-Tech basins for a 55 MLD sewage treatment plant in Nellore, India. The basins will use C-Tech technology and include four basins each measuring 39,500mm x 41,000mm x 5,000mm along with decanters. The document outlines the design philosophy, criteria, loads, analysis and codes used to design the reinforced concrete retaining walls, baffle walls, and base slab to withstand water pressures from the basins.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    209 views6 pages

    Design Criteria C.tech Basin

    Uploaded by

    Vasanthakumar
    This document provides design criteria for the structural design of C-Tech basins for a 55 MLD sewage treatment plant in Nellore, India. The basins will use C-Tech technology and include four basins each measuring 39,500mm x 41,000mm x 5,000mm along with decanters. The document outlines the design philosophy, criteria, loads, analysis and codes used to design the reinforced concrete retaining walls, baffle walls, and base slab to withstand water pressures from the basins.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6
    At a glance
    Powered by AI
    The document discusses the design of C-Tech basins for a sewage treatment plant based on C-Tech technology. It covers the design philosophy, criteria, loads, analysis and design of structural elements like retaining walls and baffle walls.

    The main objective is to treat domestic sewage water using the Cyclic Activated Sludge Process. The outflow is 2291.7 cubic meters per hour using a decanter. The basins are designed as water retaining structures according to BS 8007.

    Allowable soil bearing capacity, load combinations, and codes like IS 456 and BS 8007 are considered. Reinforced concrete elements are designed for ultimate and serviceability limit states.

    55 MLD SEWAGE TREATMENT PLANT

    STRUCTURE

    TITLE

    BASED ON C TECH TECHNOLOGY AT ALIPURAM


    NELLORE
    DESIGN PHILOSOPHY

    DOC. NO.
    LE160315-C-WW-SW-DC3236

    DEIGN

    CHECKED
    JTP

    Table of Contents
    1.

    INTRODUCTION ....................................................................................................................... 2

    2.

    DESIGN PHILOSOPHY ............................................................................................................... 2

    3.

    DESIGN CRITERIA ..................................................................................................................... 2

    4.

    MATERIAL SPECIFICATION ....................................................................................................... 3

    4.1.
    5.

    CONCRETE STRUCTURE ........................................................................................................ 3


    STRUCTURAL DESIGN CRITERIA ............................................................................................... 3

    5.1.
    6.

    NATURAL PHENOMENA ....................................................................................................... 3


    DESIGN LOADS ......................................................................................................................... 4

    6.1.

    Dead Load ............................................................................................................................ 4

    6.2.

    Live load ............................................................................................................................... 4

    7.

    LOAD COMBINATIONS ............................................................................................................. 4

    8.

    ANALYSIS AND DESIGN OF STRUCTURAL ELEMENTS .............................................................. 5

    8.1.

    ANALYSIS .............................................................................................................................. 5

    8.2.

    DESIGN OF STRUCTURAL ELEMENTS ................................................................................... 5

    8.2.1.
    9.

    CONCRETE STRUCTURES .................................................................................................. 5

    CODES AND STANDARDS ......................................................................................................... 5

    55 MLD SEWAGE TREATMENT PLANT

    STRUCTURE

    BASED ON C TECH TECHNOLOGY AT ALIPURAM


    NELLORE

    TITLE

    DESIGN PHILOSOPHY

    DOC. NO.
    LE160315-C-WW-SW-DC3236

    DEIGN

    CHECKED
    JTP

    1. INTRODUCTION
    JTP Consulting Engineers Pvt. Limited is asked to do the estimate the BOQ &
    Costing for civil work.
    This design criteria deals with the detailed load calculation of C-Tech Basins for
    Sewage Treatment plant.
    This note pertains to the Design of C-Tech Basins in Sewage Treatment plant. The CTech Basins are included the four C-Tech Basin with Decanter. The each C-Tech Basins
    dimensions are 39500 X 41000 X 5000mm. The baffle walls are the overflow and under
    flow in the basin. The height of over flow and under flow walls are 2.6m and 5.5m water
    carried the basin. The Retaining wall height is 5.5m acted the water pressure in horizontal
    directions.

    2. DESIGN PHILOSOPHY
    The main objective of the project is the treatment of domestic sewage water
    transporting to the C Tech Basin from the Primary unit by using Cyclic Activated
    Sludge Process. The outflow of water is 2291.7 m^3/ hr by using Decanter.

    3. DESIGN CRITERIA
    The C Tech basin is designed as water retaining structures as per BS 8007.
    Serviceability checks are done as per IS 456:2000 limiting crack width to 0.2mm. The
    Retaining walls of the basins are designed cantilever wall for the critical case of water
    pressure. The baffle walls are designed the wall plate with using staad.pro software. The

    55 MLD SEWAGE TREATMENT PLANT

    STRUCTURE

    TITLE

    BASED ON C TECH TECHNOLOGY AT ALIPURAM


    NELLORE

    DOC. NO.
    LE160315-C-WW-SW-DC3236

    DEIGN

    DESIGN PHILOSOPHY

    CHECKED
    JTP

    baffle walls are designed critical case of water pressure with using staad.pro software.
    The design calculation presented the Retaining structures, Base slab, Baffle wall for crack
    width, temperature reinforcement in the C Tech Basin. Control of the Structural Analysis
    and Design on this project has been completed in accordance with IS Codes of practices,
    BS Codes of practices and project-specifications. The purpose of this document is to
    summarize the code, standards and standard design criteria.

    4. MATERIAL SPECIFICATION
    4.1.

    CONCRETE STRUCTURE

    Reinforced concrete structures accordance with the provisions given in IS 456:


    2000.
    Grade of Concrete for Civil work

    M30

    Yield strength of Structural Steel

    Fe500

    5. STRUCTURAL DESIGN CRITERIA


    5.1.

    NATURAL PHENOMENA
    The allowable Safe Bearing capacity of the soil is 150kN/m2

    recommended at a foundation depth of 2.5 3.5 metres m below the


    existing ground level for the raft foundation.
    The Co-efficient of friction has been determined from IS 9527 (Part 6). The
    Co-efficient of friction between the concrete and sand is used as 0.45 at
    checking of sliding for Retaining wall.
    The C Tech Basin free board is taken as 300mm.

    55 MLD SEWAGE TREATMENT PLANT

    STRUCTURE

    BASED ON C TECH TECHNOLOGY AT ALIPURAM


    NELLORE
    DESIGN PHILOSOPHY

    TITLE

    DOC. NO.
    LE160315-C-WW-SW-DC3236

    DEIGN

    CHECKED
    JTP

    6. DESIGN LOADS
    Design loads for structures have been determined according to the criteria described
    below.

    6.1.

    Dead Load

    Dead load is the self-weight of structural elements.

    6.2.

    Live load

    Live loads consist of uniform live loads. Uniform live loads are considered the water
    load differ in the basin height.

    7. LOAD COMBINATIONS
    The C-Tech Basin loading combinations are considered in the design of structures in
    accordance with the stipulations in the IS 456:2000 design codes. The load combinations
    are mentioned below.
    Limit state of serviceability - DL+LL
    Limit state of collapse 1.5DL+ 1.5 LL
    Where,
    (DL Dead Load, LL Live Load)

    55 MLD SEWAGE TREATMENT PLANT

    STRUCTURE

    BASED ON C TECH TECHNOLOGY AT ALIPURAM


    NELLORE
    DESIGN PHILOSOPHY

    TITLE

    DOC. NO.
    LE160315-C-WW-SW-DC3236

    DEIGN

    CHECKED
    JTP

    8. ANALYSIS AND DESIGN OF STRUCTURAL ELEMENTS


    8.1.

    ANALYSIS

    The structure has been modeled in Retaining wall as cantilever wall, Baffle wall as
    wall plate with different critical cases. The structural analysis and design has been carried
    out using Staad.Pro. The retaining wall will be checked the overturning, sliding and crack
    width with different cases. The baffle wall will be checked the crack width in
    corresponding cases. The base slab is designed in temperature and moisture effects.

    8.2.

    DESIGN OF STRUCTURAL ELEMENTS

    8.2.1. CONCRETE STRUCTURES


    All RCC structural elements have been designed as per Limit state method of
    design and checked for serviceability conditions confirming to IS 456 : 2000
    The design is carried out using staad.pro software for the ultimate load
    combinations and with the following criteria;
    Clear cover to reinforcement shall
    Retaining wall = 40mm
    Baffle wall = 40mm
    Base slab = 40mm

    9. CODES AND STANDARDS


    The design and specification of work carried in accordance with all applicable
    standards. The following Codes and Standards have been identified as applying to
    structural Analysis, Design and detailing etc.

    55 MLD SEWAGE TREATMENT PLANT

    STRUCTURE

    BASED ON C TECH TECHNOLOGY AT ALIPURAM


    NELLORE
    DESIGN PHILOSOPHY

    TITLE

    DOC. NO.
    LE160315-C-WW-SW-DC3236

    DEIGN

    CHECKED
    JTP

    TABLE- LIST 0F CODES AND TABLES

    Sl.
    No

    Codes

    Description

    IS 456 : 2000

    Code of Practice for Plain and Reinforced Concrete

    SP 16 : 1980

    Design Aids for Reinforced Concrete to IS : 456 2000

    IS : 3370 (Part I) 1965

    Code of Practice for Concrete Structures for the


    Storage of Liquids - Part I - General Requirements

    IS : 3370 (Part II) 1965

    Code of Practice for Concrete Structures for the


    Storage of Liquids - Part II - Reinforced Concrete
    Structures

    BS 8007:1987

    Design of Concrete Structures for Retaining


    Aqueous Liquids

    IS 9527 ( Part 6 ) :
    1989

    Design and Construction of


    Port and Harbor Structures Code of Practice

    You might also like