Scribd
Upload
424 views11 pages

LCT APT V2 - Boot Configuration Tool - R1-Notes

This document provides instructions for using the LCT-APT Boot Configuration Tool. It describes how to configure the IP addresses of the PC and NE, set the basic parameters including the NE ID, connection mode, and IP. The process involves preparing the PC IP address, starting the tool, identifying the NE's default IP address, logging in, resetting the NE, configuring and applying the basic parameters, and logging out once complete.

Uploaded by

Wilson Botero
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
424 views11 pages

LCT APT V2 - Boot Configuration Tool - R1-Notes

This document provides instructions for using the LCT-APT Boot Configuration Tool. It describes how to configure the IP addresses of the PC and NE, set the basic parameters including the NE ID, connection mode, and IP. The process involves preparing the PC IP address, starting the tool, identifying the NE's default IP address, logging in, resetting the NE, configuring and applying the basic parameters, and logging out once complete.

Uploaded by

Wilson Botero
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

LCT-APT

Boot Configuration Tool

Global Services Division


ECI Training Department
1.11

Boot Configuration Tool

Content
IP Configuration
PC
NE

Basic Parameter Configuration


NE ID
NE Connection Mode
NE IP

2.11

Boot Configuration Tool

Preparing Your PC Setting the IP Address


In the PC Internet
Protocol (TCP/IP)
properties :

3.11

Set the IP address:


Set the subnet mask:

192.100.101.101
255.255.0.0

Boot Configuration Tool

Starting the Boot Configuration Tool


Start -> All Programs -> LCT-BGF -> Boot Configuration
Tool

4.11

Boot Configuration Tool

Default IP Address
The NE has the
default IP address:

192.100.0xx.0yy
xx and yy are the last 4 digits
of the serial number,
for example:
s/n: zzzzzzzzzxxyy
BG-20/NPT-1020 Use the s/n on the chassis
BG-30 Use the s/n inside the MCP30
BG-64/NPT-1200 Use the s/n inside the MCP64)
5.11

Boot Configuration Tool

Login

Select the type of MXC to connect


and type the default IP address of
the equipment
6.11

Boot Configuration Tool

Reset the NE

Power on the element or press the RESET button


Note the MXC/MCP orange LED will flash

7.11

Boot Configuration Tool

Basic Parameter Configuration

Press Get to upload the element


configuration to the LCT
8.11

Boot Configuration Tool

Basic Parameter Configuration

1. Configure the NE ID
2. Configure the NE
Connection Mode

3. Configure the
relevant IP addresses
4. Click Set to apply the
changes, then Get again
to verify

9.11

Boot Configuration Tool

Complete the Process Log Out!

10.11

Boot Configuration Tool

Summary
IP Configuraion
PC
NE

Basic Parameter Configuration


NE ID
NE Connection Mode
NE IP

11.11

Boot Configuration Tool

You might also like