Scribd
Upload
388 views

271 Introduction To Process Control Course Description

This document provides an overview and objectives of lessons in a course on process measurement and control. The course introduces basic devices for measuring and controlling process variables, closed-loop control, and programmable logic controllers. It covers principles of measurement, process control signals, process measurement fundamentals, principles of transducer operation, and basic process measurement systems. The objectives of each lesson are listed and describe key concepts and components that will be explained in the lessons.

Uploaded by

Adrian Reyes
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
388 views

271 Introduction To Process Control Course Description

This document provides an overview and objectives of lessons in a course on process measurement and control. The course introduces basic devices for measuring and controlling process variables, closed-loop control, and programmable logic controllers. It covers principles of measurement, process control signals, process measurement fundamentals, principles of transducer operation, and basic process measurement systems. The objectives of each lesson are listed and describe key concepts and components that will be explained in the lessons.

Uploaded by

Adrian Reyes
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PROCESS CONTROL INSTRUMENTATION

Introduction to Process
Measurement and Control
Course 271: Introduction to Process Measurement and Control
Covers the function of basic devices for measuring and controlling different kinds of variables in process control. Introduces closedloop control and PID functions. Introduces analog and digital devices and programmable logic controllers (PLCs). Covers basic
principles of measurement and defines process control terms. Describes several kinds of signals and displays and traces the path of
a signal through the system. Explains the operation of transducers, transmitters, signal conditioners, converters, and recorders.
TPC Training Systems is accredited by IACET to offer 0.6 CEU for this program.

Lesson 1: The Nature of Process Control


Topics

Lesson 3: Process Control Signals


Topics

Process Variables; On-Off Process Control; Functions of Automatic


Process Control; Typical Process Control Applications; Measuring Data in
Control Systems; Controlling Variables Automatically; Error, Signal
Evaluation, and Feedback; Open- and Closed-Loop Control Systems

Process Signals; Linear and Nonlinear Transducers; Signal Operating


Values; Error in Signal Measurement; Controller Output; Pneumatic Signal
Transmission; Flapper-Nozzle System; Electrical Signal Transmission;
Current-Pneumatic Systems; Transmission of Other Signals; Typical
Control Loops

Objectives
Define setpoint, control point, and error.
Explain how measurement and control are related in industrial
processes.
Describe the four essential functions of an automatic control
system.
Discuss the functions of PLCs and industrial computers in control
systems.
Identify variables in industrial processes.
Explain the importance of feedback in a closed-loop control
system.

Lesson 2: Elements of Process Control


Topics
Process Operation; Analog Control Signals; Digital Control Signals; ASCII;
Measuring Process Variables; Measuring Pressure; Measuring Level;
Measuring Flow Rate; Digital Pulse Control; Control System Terminology;
Open- and Closed-Loop Control; Controller Action

Objectives
Discuss the differences between modern automatic control
systems and older ones.
Identify the standard signals used in process control.
Define the terms commonly used in control terminology.
Describe on-off, proportional, integral, derivative, and PID
controller action.

Objectives
Discuss standard signals and linearity and explain how to
calculate the value of a variable from an instruments span and
range.
Describe five common sources of error in signal measurement.
Discuss the basic principles governing pneumatic signal
transmission and explain how a flapper-nozzle device works.
Describe the function of the controller in a control loop.
Discuss the basic principles governing electrical signal
transmission, including Ohms law, and list standard current and
voltage signals.
Explain the function of I/P devices in a typical control system and
discuss the use of digital signals and optical signals.

Lesson 4: Process Measurement Fundamentals


Topics
The Purpose of Measurement; Kinds of Signals; Measurement
Requirements; Kinds of Displays; Remote vs Local Display; Errors in
Measurement Systems; Calibration; Noise; Response Time; Measurement
System Deterioration; Observation Errors; Transmitters; Proportionality

Objectives
Explain why measurement is necessary and discuss conditions
that affect the degree of accuracy required.
Compare the advantages of linear and nonlinear displays.
Compare analog and digital devices and explain how each is
applied to measurement.
Name five sources of measurement error.
Discuss proportionality and explain how it applies to transmitters.

P: 847.808.4000 F: 847.808.4003 www.tpctraining.com

189

PROCESS CONTROL INSTRUMENTATION

Introduction to Process
Measurement and Control
Lesson 5: Principles of Transducer Operation
Topics
Signal Measurement and Transmission; Matching the Transducer to the
Application; Kinds of Output; Mechanical and Electrical Elements;
Pneumatic Response; Relating Distortion to Pressure; Electrical
Response; Resistance Devices; Voltage Response Devices; Frequency
Response Devices; Electromechanical Devices; Combining Elements;
Transducers and Todays Technology

Lesson 6: Basic Process Measurement Systems


Topics
Interaction of System Elements; Translating the Measurement; The
Transmitter as Communicator; Electrical vs Pneumatic Output; Analog
Signal Conditioning; Analog Signal Converters; Converting from Analog to
Digital and Back; Analog Indicators; Analog Recorders; Digital Indicators
and Recorders; A Complete System

Objectives
Objectives
Discuss the need for linearity in a process.
List examples of mechanical and electrical transducer elements.
Compare pneumatic response and electrical/electronic response
in transducers.
Describe the operation of the bourdon tube, bellows, and
diaphragm.
Give examples of resistance, voltage response, frequency
response devices and explain how they work.
Discuss the use of the Hall-effect transducer and the differential
transducer.

190

Discuss the basic elements of measuring systems and explain


how they interact.
Describe how a physical quantity is translated into another
quantity.
Discuss the use of transmitters to relay information from one
location to another and explain the transfer function.

P: 847.808.4000 F: 847.808.4003 www.tpctraining.com

You might also like