Scribd Logo
Upload

Welcome to Scribd!

  • 152 views

    LDN - Form

    Uploaded by

    Rafael Echano Acedera
    This document is a request for power supply arrangements for a new project. It provides details about the project such as the owner, area, and type of premises. It also specifies the existing and proposed electrical loads and required connection documents. The customer service directorate will arrange the low voltage power supply, including the substation details, feeder pillar, service turret, and cable sizes. The existing load may be diverted to a new main distribution board. The asset management directorate will arrange the high voltage supply, including the substation type and location, transformer to low voltage panel cable size. Detail drawings of the high voltage and transformer rooms must be submitted for approval.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    LDN - Form

    Uploaded by

    Rafael Echano Acedera
    152 views1 page
    This document is a request for power supply arrangements for a new project. It provides details about the project such as the owner, area, and type of premises. It also specifies the existing and proposed electrical loads and required connection documents. The customer service directorate will arrange the low voltage power supply, including the substation details, feeder pillar, service turret, and cable sizes. The existing load may be diverted to a new main distribution board. The asset management directorate will arrange the high voltage supply, including the substation type and location, transformer to low voltage panel cable size. Detail drawings of the high voltage and transformer rooms must be submitted for approval.

    Original Description:

    LDN Sample

    Original Title

    LDN -form

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a request for power supply arrangements for a new project. It provides details about the project such as the owner, area, and type of premises. It also specifies the existing and proposed electrical loads and required connection documents. The customer service directorate will arrange the low voltage power supply, including the substation details, feeder pillar, service turret, and cable sizes. The existing load may be diverted to a new main distribution board. The asset management directorate will arrange the high voltage supply, including the substation type and location, transformer to low voltage panel cable size. Detail drawings of the high voltage and transformer rooms must be submitted for approval.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    152 views1 page

    LDN - Form

    Uploaded by

    Rafael Echano Acedera
    This document is a request for power supply arrangements for a new project. It provides details about the project such as the owner, area, and type of premises. It also specifies the existing and proposed electrical loads and required connection documents. The customer service directorate will arrange the low voltage power supply, including the substation details, feeder pillar, service turret, and cable sizes. The existing load may be diverted to a new main distribution board. The asset management directorate will arrange the high voltage supply, including the substation type and location, transformer to low voltage panel cable size. Detail drawings of the high voltage and transformer rooms must be submitted for approval.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    SA NO :

    Customer Service Directorate.


    Support Services Department.
    Power Services Section.

    CASE ID :

    FM.CS/SSD. 10-01

    Please propose the supply arrangements for the following project, mark the cable entry & electrical room
    Location on the documents enclosed.

    1- Owner Name : ...


    2- Project Name : ...
    3-Area
    :
    4-Plot No :
    5 - Type of Premise :
    6 - Provisional date of the project completion :

    : New Connection ( Tender : Shop drawing )


    : Reinforcement EX. Supply : AC NO:
    M:NO :
    : How many cable supplied from AADC network
    8- Connected Load
    :
    Existing
    New
    Total
    Air Conditioning Load
    _____________
    _____________
    ___________
    Other Loads
    _____________
    _____________
    ___________
    Future Load (If any)
    ___________
    Total Connected Load
    _____________
    _____________
    ___________
    7- Connection Type

    10- Required Documents :


    Site Plan
    Electrical Site Layout
    Schematics Drwgs.
    Electrical Room Layout

    Date:

    We hereby declare all the above mentioned data are correct & in case any load changing
    is more than 10%, a Revised submission of supply arrangement request will be
    proceed . We strongly undertake that,
    1- We shall officially report to AADC three months before completion of Electrical Room.
    2- Any change request for approved E/R location we shall resubmit for a new AADC
    approval within TWO weeks from receiving first AADC reply.
    Contractor Signature & Stamp :
    Consultant Signature & Stamp :

    Contact Tel No :

    Contact Tel No :

    The Power Supply for LV side will be arranged as the following details by C.S.D
    1234-

    KW
    KW
    KW
    KW

    Sub Station: Ex. S/S No


    :
    Capacity :
    KVA
    Type :
    Feeder Pillar No :
    Existing

    Service Turret No :
    Existing

    Cable Size : From Feeder Pillar / Service Turret to the Consumers Main Switch
    No's run of 4C X ( 240 , 185
    Existing Load if any shall be diverted to new MDB:
    3- Others :

    Eng&S.Eng

    Indoor
    New
    New

    Outdoor

    120 , 70 , 50 ,
    25 , 16 ) mm2 Cu . SWA cable.
    2- Approved AS GIS As per site visit

    Eng&S.U.Head

    P.S.S.Head

    The Power Supply for HV side will be arranged as the following details by A.M.D :
    1-Sub Station :
    Existing S/S No
    New
    S/S No
    Location

    :
    :
    :

    2- Building Construction By :

    Capacity :
    Capacity :

    KVA
    KVA

    Inside the owner Plot


    AADC

    Type :
    Type :

    Indoor
    Indoor

    Outdoor
    Outdoor

    Outside the owner plot


    Consumer

    3- Cable Size : From Transformer to LV Panel Main Breaker:

    No's run of (1C X 630 mm2, 4C X 240 mm2) Cu. AWA cable.

    2- Detail drawings of the HV& Transformer rooms if any must be submitted for AADC approval
    3- Others :

    P.N.P.E
    FM.CS/SSD. 10-01-Rev0

    P.N.P.S.E

    P.N.P.S.H

    You might also like