P R O T E C T I V E C O AT I N G S
S I G M A C O AT I N G S
Recoatable Epoxy Systems
For Maintenance / New Construction
Protective Coating solutions that cover your needs
SIGMACover
SIGMACover
SIGMACover
SIGMACover
SIGMACover
SIGMACover
SIGMACover
SIGMACover
SIGMACover
SIGMACover
SIGMACover
1500
805
630
566
522
480
456
435
300
280
256
SIGMACover 211
The SigmaCover Range Tough coatings for tough
Sigma Protective Coatings
is dedicated to the
development, manufacture
and supply of coatings to
meet the very challenging
needs of specific industries.
With a heritage of
outstanding expertise in
coatings technology and
decades of international
investments in research
and development for the
protective coatings market,
no company could be better
placed than Sigma to meet
the fast-changing global
challenges of this technically
demanding sector.
SigmaCover is a range of tough, durable epoxy coatings designed for both
new build and maintenance of major assets.
The range has a number of outstanding features to ease application.
The benefits of SigmaCover result in easy to apply, cost-effective solutions
within a wide range of applications across the protective coatings industry.
The following specific characteristics can be found in certain products within
the SigmaCover range.
Unlimited recoatability
Cold cure characteristics
VOC compliant
Tough durable coatings
Ease of applications
Cost-effective
environments
SigmaCover 256
SigmaCover 280
surface tolerant
SigmaCover 805
cold cure
SigmaCover 630
recoatability
SigmaCover 1500
0%
durability
20%
40%
60%
80%
100%
The SigmaCover Range
SURFACE TOLERANT
DIRECT TO METAL
SigmaCover 1500
SigmaCover 805
Two pack solvent free epoxy
Two component high solids epoxy
Primer and buildcoat
Application direct to metal
Surface tolerant
Tar free replacement for tar epoxy
Solvent free
Good abrasion resistance
Compatible with virtually all
aged coatings
Compatible with CP
Excellent corrosion resistance in
industrial or coastal applications
Outstanding seawater
resistance
Excellent corrosion resistance in
industrial or coastal applications
SigmaCover 630
Two pack high solids epoxy
SigmaCover 300
Two pack high build coal tar epoxy
Primer and/or buildcoat
Excellent surface tolerant
characteristics
Outstanding water and
crude oil resistance
Good impact and abrasion
resistance
Cold cure characteristics
down to - 5C
Compatible with virtually
all aged coatings
Good abrasion resistance
Resistant to splash and spillage
of a wide variety of chemicals
Excellent corrosion resistance in
industrial or coastal applications
Excellent corrosion resistance in
industrial or coastal applications
Compatible with CP
SEALER/TIECOATS
COATINGS
PRIMERS
SigmaCover 566
SigmaCover 480
SigmaCover 280
Two pack epoxy acrylic tiecoat
Two pack chemical resistant epoxy finish
Two pack universal epoxy primer
Good adhesion on coil coated
substrates like PVC,
plastisol PVDF, Polyester
and Polyurethane
Specifically designed for
chemical resistance
High impact and bend
resistance
Extended recoating intervals
Good adhesion to non-ferrous
substrates and galvanised steel
Easy application by
brush/roller/spray
Compatible with CP systems
Long recoating intervals
Easy to clean
Suitable on wet blast substrates
(damp or dry)
Long potlife but short
drying times
Easy application by brush
and roller/spray
SigmaCover 522
Two pack micaneous iron oxide
pigmented epoxy sealer
Specifically designed as sealer
for zinc rich and metal sprayed
surfaces
Can be used as a primer/sealer
or coating
Good adhesion to
galvanised steel
Resistant to impact and
abrasion
SigmaCover 456
Two pack recoatable epoxy coating
Excellent durability, tough
with long-term flexibility
Cold cure characteristics
down to -10C
Good adhesion to aged alkyds,
chlorinated rubbers and epoxy
coatings
SigmaCover 256
Two pack zinc phosphate
recoatable epoxy primer
Unlimited recoatability
Suitable for atmospheric
conditions
Excellent corrosion resistance in
industrial or coastal applications
Easy to apply by
brush/roller/spray
Cold cure characteristics
down to -10C
Unlimited recoatability
Good adhesion to
galvanised steel
Can be used for both
atmospheric or immersion
applications
SigmaCover 435
Good abrasion and
impact resistance
Two pack micaneous iron oxide
pigmented recoatable epoxy coating
Resistant to 200C in dry
atmospheric conditions
Excellent universal primer
for atmospheric or immersion
applications
Excellent durability, tough with
longterm flexibility
Easy application by
brush/roller/spray
SigmaCover 211
Two pack epoxy concrete primer
Cold cure characteristics
down to -10C
Specifically designed
for concrete substrates
Good adhesion to aged alkyds,
chlorinated rubber and epoxy
coatings
Good chemical resistance
High temperature characteristics
up to 200C
Easy to clean
Easy to apply by
brush/roller/spray
Unlimited recoatability
Good impact and abrasion
resistance
SigmaCover Applications
The SigmaCover range is widely used and trusted across the industry sector of the
protective coatings business. The products meet the very challenging environment
found in infrastructure, power, oil and gas, offshore and civil building.
Infrastructure
Offshore
Bridges
Port and harbour structures
Waste and water
Oil & Gas
Steel Construction
Tank externals
Civil building
Power
Airports
Stadia
Shopping complexes
Wind Turbines
Power Plants
Offshore platforms
TLP
Drilling rigs
FPSO
Coastal structures
The SigmaCover Range Renamed
SIGMACover 1500 (new development)
Solvent free epoxy, compatible with virtually all aged coatings
SIGMACover 805 (SigmaCover DTM coating)
High solid epoxy directly applicable on metal
SIGMACover 630 (Sigma Multimastic / SigmaCover ST)
High solid surface tolerant epoxy coating
SIGMACover 566 (SigmaClad Tiecoat)
Epoxy acrylic tiecoat with good adhesion on oil-coated substrates like
PVC and Polyester
SIGMACover 522 (Sigmarite Sealer)
MIO pigmented epoxy sealer especially for zinc rich and metal sprayed
surfaces. Can be used as coating or primer
SIGMACover 480 (Sigmarite GP Finish)
Chemical resistant epoxy finish resistant to impact and abrasion
SIGMACover 456
(Sigma CM coating / SigmaCover CM coating)
Recoatable epoxy coating curing at temperatures as low as -10C
SIGMACover 435
(Sigma CM miocoat / SigmaCover CM miocoat)
MIO pigmented recoatable epoxy coating curing at temperatures
as low as -10 and heatresistant up to 200C
SIGMACover 300 (Sigma TCN 300)
High build coal tar epoxy highly resistant to water and crude oil,
cold cure characteristics down to -5C
SIGMACover 280
(Sigma Universal Primer / SigmaCover Primer)
Universal epoxy primer for atmospheric / immersion exposure conditions
SIGMACover 256 (SigmaCover CM Primer)
Zinc phosphate recoatable epoxy primer, cold cure down to -10C
SIGMACover 211 (Sigmarite WL Primer)
Epoxy primer especially designed for concrete substrates
Direct to metal
technology
Tolerance to low grade
surface preparation
Sigma Coatings field technical support staff are among the most highly
skilled and trained in the coatings business. With in-depth knowledge of
the working realities facing the industries we supply, our technical experts
offer an unsurpassed perspective on the coatings options that can help your
industry to function optimally, maximising technical performance and
minimising expensive down time.
Compatible with
cathodic protection
Resistant to industrial
polluted areas
Complimentary documentation
SigmaCover 1500
Product data sheet 7715
SigmaCover 805
Product data sheet 7726
SigmaCover 630
Product data sheet 7430
SigmaCover 566
Product data sheet 0503
SigmaCover 522
Product data sheet 7420
SigmaCover 480
Product data sheet 7441
SigmaCover 456
Product data sheet 7466
SigmaCover 435
Product data sheet 7465
SigmaCover 300
Product data sheet 7472
SigmaCover 280
Product data sheet 7417
SigmaCover 256
Product data sheet 7412
SigmaCover 211
Product data sheet 7406
943720
No rights can be derived from the content of this publication. Unless otherwise agreed in writing, all products and technical advice given are subject to our standard conditions of sale (www.sigmacoatings.com).
Longlasting
Strength
