Scribd Logo
Upload

Welcome to Scribd!

  • 89 views

    Torque Wrenches: STW101 STW1011 STW102 STW103 STW104 STW200 STW201.V2 STW202 STW1012

    Uploaded by

    isidro
    Instructions For TORQUE WRENCHES

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Torque Wrenches: STW101 STW1011 STW102 STW103 STW104 STW200 STW201.V2 STW202 STW1012

    Uploaded by

    isidro
    89 views3 pages
    Instructions For TORQUE WRENCHES

    Original Title

    STW1012

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Instructions For TORQUE WRENCHES

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    89 views3 pages

    Torque Wrenches: STW101 STW1011 STW102 STW103 STW104 STW200 STW201.V2 STW202 STW1012

    Uploaded by

    isidro
    Instructions For TORQUE WRENCHES

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Instructions For:

    TORQUEWRENCHES
    MODEL No's

    STW101 STW1011 STW102 STW103 STW104 STW200 STW201.V2 STW202 STW1012

    Thank you for purchasing a Sealey Product. Manufactured to a high standard this tool will, if used according to these instructions and properly maintained, give years of trouble free performance.
    IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT
    CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
    INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

    1.








    SAFETY INSTRUCTIONS

    Ensure all workshop safety rules, regulations, and conditions are complied with when using the torque wrench.
    Maintain the wrench in good condition and replace any damaged or worn parts. Use genuine parts only. Unauthorised parts may be dangerous and will
    invalidate the warranty.
    The wrench is a precision tool, DONOT abuse it. DO NOT drop or throw the wrench.
    Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
    WARNING! DO NOT use the wrench if damaged or thought to be faulty (contact Service Agent).
    DO NOT use wrench unless you have been instructed in its use by a qualified person.
    DO NOT use any cleaner which might affect the high pressure grease with which the wrench is packed.
    After use adjust to lowest torque setting (but not below),clean and store in a safe, dry, childproof location.

    2.

    Introduction & SPECIFICATIONs

    2.1. Introduction
    These torque wrenches are precision tools and each is supplied with a calibration certificate. Torque setting is by means of a micrometer type adjuster and the drive
    head has a reversible ratchet.
    2.2. Specifications
    Model No. . . . . . . . . . STW101 . . . STW1011 . . STW102 . . . STW103 . . .
    Torque Range (Nm) . . 5-25 . . . . . . . 7-112 . . . . . . 40-210 . . . . . 70-420 . . . . .
    Alternative Scale . . . . 44-221lb.in . 5-83lb.ft . . . . 30-155lb.ft . . 52-310lb.ft . .
    Drive (sq) . . . . . . . . . . 1/4 . . . . . . . 3/8 . . . . . . . 1/2 . . . . . . . 3/4 . . . . . . .
    Length (mm) . . . . . . . 275 . . . . . . . 370 . . . . . . . 460 . . . . . . . 650 . . . . . . .

    STW104 . . . . .
    140-700 . . . . .
    103-516lb.ft . .
    3/4 . . . . . . . .
    1070 . . . . . . . .

    STW200 . . . STW201.V2 . . . STW202 . . STW1012


    10-110 . . . . 30-210 . . . . . . . . 50-560 . . . . 2-24
    10-80lb.ft . . 20-150lb.ft . . . . . 50-400lb.ft . 1.47-17.7lb.ft
    3/8 . . . . . . . 1/2 . . . . . . . . . . 3/4 . . . . . . 3/8
    405 . . . . . . . 490 . . . . . . . . . . 675 . . . . . . 275

    3. operation
    3.1. Hold the torque wrench in your left hand (if right handed) so that the

    required scale on the shaft, just above the hand grip - is uppermost and
    visible.
    3.2. Turn the lock screw, in the end of the grip, counter-clockwise to unlock grip

    (STW201.V2 has a locking plug in the end of the grip - pull ring to unlock).
    3.3. Turn grip to select torque setting as follows:

    Required setting - 56Nm

    Turn grip until top edge is level with the 50Nm line on the shaft scale
    and the zero on the grip graduation is aligned with the centre line of
    the shaft scale.

    Rotate the grip further, clockwise, until the 6 on the grip graduation is
    aligned with the centre line to give a setting of 50 + 6 = 56Nm.
    Note: If using the alternative scale (lb.in, lb.ft or kg.m depending on

    wrench) then each division of the grip graduation is equivalent to

    the scale increment divided by the number of divisions. For

    example (STW1011):

    The alternative scale is in lb.ft.

    Scale increments are 5.16lb.ft

    There are 7 grip divisions.

    Then each division is 5.16/7 = 0.74lb.ft
    3.4. Tighten the lock screw at the end of the handle to prevent accidental

    alteration of the setting.
    3.5. When tightening the nut/bolt you will feel and hear the wrench

    mechanism click when the set torque is reached. Immediately stop

    applying force to the wrench to avoid over-tightening the nut/bolt.

    The wrench will reset ready for the next application.
    Note: If wrench is not used for some while, operate it a few times, at a

    low setting, to ensure that all internal parts are coated in grease.

    4. Recalibration
    4.1 To ensure continued accuracy the wrench should be

    recalibrated annually and after any impact or other misuse.

    Contact your Sealey dealer or a NAMAS accredited laboratory.

    5.

    CALIBRATIONCERTIFICATE

    5.1 See over for the Calibration Certificate for this wrench.

    NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
    IMPORTANT: No liability is accepted for incorrect use of this product.
    WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
    INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

    Sole UKDistributor, Sealey Group,


    Kempson Way, Suffolk Business Park,
    Bury St. Edmunds, Suffolk,
    IP32 7AR
    Jack Sealey Limited

    01284 757500
    01284 703534

    Web
    email

    www.sealey.co.uk
    [email protected]

    Original Language Version STW101, STW1011, STW102, STW103,STW104,


    STW200, STW201.V2, STW202, STW1012 (I)

    Issue: 3 - 16/01/14

    TORQUEWRENCH CALIBRATIONCERTIFICATE
    Models:

    Jack Sealey Limited

    STW101, STW1011, STW102, STW103, STW104,


    STW200, STW201.V2, STW202 & STW1012

    Original Language Version STW101, STW1011, STW102, STW103,STW104,


    STW200, STW201.V2, STW202, STW1012 (I)

    Issue: 3 - 16/01/14

    STW 200
    10
    110

    137.5
    30
    70
    110

    28.8
    67.2
    105.6

    31.2
    72.8
    114.4

    700
    152.0
    356
    560

    145.9
    341.8
    537.6

    158.1
    370.2
    582.4

    30
    6.8
    15.2
    24

    6.5
    14.6
    23

    7.1
    15.8
    25

    STW202
    50
    560

    STW1012
    2
    24

    Environmental Protection.
    Recycle unwanted materials instead of disposing of them as
    waste. All tools, accessories and packaging should be sorted,
    taken to a recycling centre and disposed of in a manner which
    is compatible with the environment.

    NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
    IMPORTANT: No liability is accepted for incorrect use of this product.
    WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
    INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

    Sole UKDistributor, Sealey Group,


    Kempson Way, Suffolk Business Park,
    Bury St. Edmunds, Suffolk,
    IP32 7AR
    Jack Sealey Limited

    01284 757500
    01284 703534

    Web
    email

    www.sealey.co.uk
    [email protected]

    Original Language Version STW101, STW1011, STW102, STW103,STW104,


    STW200, STW201.V2, STW202, STW1012 (I)

    Issue: 3 - 16/01/13

    You might also like