0% found this document useful (0 votes)
111 views10 pages

M Tech EEE IInd Sem - Syllabus

This document outlines the scheme of examination for the 2nd semester M.Tech program in Electrical Devices and Power System Engineering at Chhattisgarh Swami Vivekanand Technical University. It includes: 1. A list of 7 subjects to be studied in the semester, along with their codes, credit hours, and evaluation scheme which includes end semester exam, class tests, and teachers assessment. 2. Details of two laboratory subjects including their evaluation scheme. 3. A table listing 3 elective subjects that students can choose from. 4. Additional notes on class size requirements for electives and inability to change electives once chosen. The summary covers the key information about the subjects,
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
111 views10 pages

M Tech EEE IInd Sem - Syllabus

This document outlines the scheme of examination for the 2nd semester M.Tech program in Electrical Devices and Power System Engineering at Chhattisgarh Swami Vivekanand Technical University. It includes: 1. A list of 7 subjects to be studied in the semester, along with their codes, credit hours, and evaluation scheme which includes end semester exam, class tests, and teachers assessment. 2. Details of two laboratory subjects including their evaluation scheme. 3. A table listing 3 elective subjects that students can choose from. 4. Additional notes on class size requirements for electives and inability to change electives once chosen. The summary covers the key information about the subjects,
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Chhattisgarh Swami Vivekanand Technical University Bhilai (C.G.

)
SCHEME OF EXAMINATION
DEPARTMENT OF ELECTRICAL & ELECTRONICS ENGINEERING

M.Tech. in Electrical Devices & Power System Engineering


2nd SEMESTER

S.
NO.

Board of Study

Subject Code

Electrical Engg.

559211 (24)

Electrical Engg.

559213 (24)

3
4

Electrical and
Electronics Engg
Electrical and
Electronics Engg.

570211 (25)
570212 (25)

Refer Table-II

Subject

EHV -AC & DC


Power System Stability
and Control
Power System
Automation
Electro Mechanical
Devices
Elective-II

Electrical and
Electronics Engg.

570221(25)

Electrical Engg.

570222 (25)

Period per
Week

Power System
Automation Lab
Power System
Simulation Lab

Total

Scheme of exam
Theory/Practical

Total
Marks

Credit
L+(T+P)/2

ESE

CT

TA

100

20

20

140

100

20

20

140

100

20

20

140

100

20

20

140

100

20

20

140

75

75

150

75

75

150

15

650

100

250

1000

24

Table II
Elective- I
S.
No.

Board of Study

Subject Code

Subject

Electrical and Electronics Engg.

570231 (25)

Power Quality and conditioning

Electrical and Electronics Engg.

570232 (25)

Artificial Intelligence and Neural Networking

Electrical and Electronics Engg.

570233 (25)

Processcontrol

Lecture T- Tutorial P- Practical ESE- End Semester Exam


CT- Class Test TA- Teachers Assessment
Note (1) 1/4th of total strength of students subject to minimum of eighteen students is required to offer an
elective in the college in a Particular academic session .
Note (2) Choice of elective course once made for an examination cannot be changed in future examinations.

Chhattisgarh Swami Vivekanand Technical University Bhilai (C.G.)


Semester: M.TECH. 2nd
Subject: EHV-AC & DC
Total Theory Periods: 40
Total Marks in End Semester Exam. : 100
Minimum number of class test to be conducted: 02

Specialization: Electrical Devices and Power System Engg.


Branch: Electrical and Electronics Engineering
Code: 559211 (24)
Total Tutorial Periods: 12

UNIT-1
Sequential impedances of AC systems EHVAC transmission over voltages, insulation design of lightning
and switching over voltages, High voltage testing of AC equipments, Reactive Power compensation of
EHV AC lines.
UNIT-2
DC Power Transmission Technology:
Application of DC Transmission, Description of DC
Transmission System, Planning for HVDC Transmission, Modern Trends in DC
Transmission, Thyristor Device, Thyristor Valve, Valve Tests, Recent Trends in valves.
Comparison of EHV AC & DC transmission.
UNIT-3
HVDC Converters: Pulse Number, Choice of Converter Configuration, Simplified Analysis of Graetz
Circuit, Converter Bridge Characteristics. Characteristics of a Twelve Pulse Converter,
Detailed Analysis of Converters
HVDC System Control: Principal of DC Link Control, Converter Control Characteristics, System
Control Hierarchy, Firing Angle Control, Current and Extinction Angle Control, Starting and
Stopping of DC Link, Power Control, Higher
Level
Controllers,
Telecommunication Requirements
UNIT-4
Converter Faults and Protection: Converter Faults , Protection Against Overcurrents, Over voltages in
a Converter Station , Surge Arresters, Protection Against Over voltages.
Smoothing Reactor and DC Line: Smoothing Reactors, DC Line, Transient over Voltages In DC Line,
Protection of DC Line, DC Breakers, Monopolar Operation, Effects of Proximity of AC and DC
Transmission Lines
UNIT-5
Reactive Power Control: Reactive Power Requirements in Steady State, Sources of Reactive
Power, Static Var Systems, Reactive Power Control during Transients
Harmonics and Filters: Generation of Harmonics, Design of AC Filters, DC Filters, Carrier Frequency
and RI Noise
Text:
1. HVDC Power Transmission System: K.R. Padiyar , Wiley Eastern Limited.
Reference:
1. Power System Stability and Control by Prabha Kundur- EPRI. Mc Graw Hill Inc.

Chhattisgarh Swami Vivekanand Technical University Bhilai (C.G.)


Semester: M.TECH. 2nd
Subject: Power System Stability & Control
Total Theory Periods: 40
Total Marks in End Semester Exam. : 100
Minimum number of class test to be conducted: 02

Specialization: Electrical Devices and Power System Engg.


Branch: Electrical and Electronics Engineering
Code: 559213 (24)
Total Tutorial Periods: 12

Unit 1
Power System Structure: Operating states, control problem, control loops. Power System
Stability classification, terms and definitions.
Power system components: H ydraulic and steam turbine, Effect of exciter and
governor.
Excitation system requirements, functions, types and modeling of excitation systems, IEEE
standards and models.
Unit 2
Control of Power and Frequency: Power, Frequency characteristics, Division of load,
Load frequency control, Generator, load and Prime mover models, Go vernor models, AGC in a
two area system, AGC in a multi area system parameter setting constants, Tie- line bias
control, AGC with optimal dispatch of Generation, AGC including Excitation system, Conventional
PI and PID controllers
for AGC, AI applications automatic generation control.
Unit 3
Control of voltage and Reactive Power: Relation between voltage, power and reactive
power, Generation and absorption of reactive power, voltage control and voltage stability
analysis, V-Q curves and sensiti vity analysis, Voltage stability indices, Factors affecting
voltage instability and voltage collapse.
Unit 4
Stability Studies: Concepts, steady state and transient stability, small signal stability
analysis, excitation system, Dynamic and transient stability analysis of single machine and
multi -machine systems, power system stabilizer design and analysis for stability problem.
Transient Stability: Solution
of swing equations, swing curves, stability criterion.
Unit 5
Techniques for the improvement of stability: operation under abnormal and distressed
condition, Enhancement of small signal stability: use of power system stabilizers, supplementary
control of Static VAr compensators, supplementary control of HVDC links, Techniques for
improvement of transient stability, Integrated analysis of Voltage and Angle stability, Control of
voltage instability, concepts of load shedding.
Text Books:
Prabha Kundur, Power System Stability and Control Mc-Graw Hill Inc, New York,
1993. Taylor C.W., Power System Voltage Stability Mc-Graw Hill Inc, New York,
1993.
Reference Books:
K.R.Padiyar,.Power System Dynamic . Stability and Control., Inter Publishing(P) Ltd., Bangalore,
1999 .
P.S.R. Murthy , Power System Operation and Control, Tata Mc- Graw ,New Delhi
1984. Nagrath IJ, Kothari ., Power System Engineering , Tata Mc- Graw ,New Delhi
1994.
Weedy B.M. Electric Power System John Wiley and Sons ,3 rd edition .
O.1 Elgerd, Electric Energy System Theory : an Introduction, Mc-Graw Hill, NX, 1983 (Mainy for Unit II)

Chhattisgarh Swami Vivekanand Technical University Bhilai (C.G.)


Semester: M.TECH. 2nd
Subject: Power System Automation
Total Theory Periods: 40
Total Marks in End Semester Exam. : 100
Minimum number of class test to be conducted: 02

Specialization: Electrical Devices and Power System Engg..


Branch: Electrical and Electronics Engineering
Code: 570211 (25)
Total Tutorial Periods: 12

UNIT-I
System design, optimization, direct digital control, distributed control, Fuzzy technique of control;
Auidics: Fluid control device, bi-stable amplifier, control valve flow meter; Turbine.
UNIT-II
Automation using drives: Introduction, various components of automation, different sensors used in
automation, PLC introduction and ladder programming, industrial application of automation, sensor
less vector control and DTC drive, Recent trends in automation and case studies. Control and
protection; Numerical control; major classes and operating principle.
UNIT III
Communications & fault finding: An introduction to communication options available for the type of
PLCs includes also how to find hardware faults and probable causes.
UNIT IV
MMI
Introduction to MMI, its need, operation details and fundamentals of MMI, fault display in MMI, timer
counter setting from MMI. Interfacing with PLC.
UNIT V
SCADA: Introduction to SCADA, configuration of different drivers, gateway, Database of tags and its
use. Interfacing with PLC and simulation of PLC application in SC AC Drive Fundamentals of AC Drive,
block diagram of AC drive, configuration of different drives. Control of drive with and without PLC.
Various applications of AC Drive. Interfacing with PLC
TEXT BOOKS:
1. B.K. Bose, Power Electronics and variable frequency drives, Prentice Hall, New Jersey.
2. T.J.E. Miller, Brushless permanent magnet and reluctance motor drives, Oxford University
Press, UK
3. S.A. Nasar, Linear induction motor, John Wiley, New York
Reference Books:
4. J.C. Andreas, Energy Efficient Motors, Marcel Dekker
5. J.M.P. Murphy, Power Electronics control of AC Drives, Pergamon Press

Chhattisgarh Swami Vivekanand Technical University Bhilai (C.G.)


Semester: M.TECH. 2nd
Subject: Electro Mechanical Devices
Total Theory Periods: 40
Total Marks in End Semester Exam. : 100
Minimum number of class test to be conducted: 02

Specialization: Electrical Devices and Power System Engg..


Branch: Electrical and Electronics Engineering
Code: 570212 (25)
Total Tutorial Periods: 12

UNIT-I
Linear electro-mechanical devices of different geometry; levitation machines, Force machines and
Energy machines.
UNIT-II
Linear induction motor; Edge and end effects; depth of penetration and its effects. Mathematical
modeling. Constructional aspects, design and analysis of reluctance, shaded pole, hysteresis, printed
circuit, claw motors, Servomotors and A.C. tacho-generators, Introduction of permanent magnet
materials. Angled field and axial field devices; cross-field machines, special forms of rotating
amplifiers. Electromagnetic clutches, coupling and brakes, Eddy current devices.
UNIT-III
Review of adjustable speed drives, square wave and sine wave permanent magnet, Brushless
machines and drives systems. Reluctance motors; Stepper motor; control circuit and operational
characteristics. Disc and claw motors; Hysterisis motors.
UNIT-IV
Servo motors; DC and AC; position control application; Tacho generators, Synchronous analysis. High
performance energy efficient machines.
UNIT-V
Advanced Motors and Drive Systems Principle, construction, operation and drive application of
Square wave Permanent Magnet (PM) brushless motor drives, sine wave PM brushless motor drives,
PM and synchronous reluctance based motors, switched reluctance motors, Energy efficient
motors.Special machine associated with wind, solar, tidal, wave, micro hydel and other nonconventional energy sources. Motor for robotic drive application.
TEXT BOOKS:
1. B.K. Bose, Power Electronics and variable frequency drives, Prentice Hall, New Jersey.
2. T.J.E. Miller, Brushless permanent magnet and reluctance motor drives, Oxford University Press, UK
3. S.A. Nasar, Linear induction motor, John Wiley, New York

Reference Books:
4.
5.

J.C. Andreas, Energy Efficient Motors, Marcel Dekker


J.M.P. Murphy, Power Electronics control of AC Drives, Pergamon Press

Chhattisgarh Swami Vivekanand Technical University Bhilai (C.G.)


Semester: M.TECH. 2nd
Subject: Power Quality and Conditioning
Total Theory Periods: 40
Total Marks in End Semester Exam. : 100
Minimum number of class test to be conducted: 02

Specialization: Electrical Devices and Power System Engg..


Branch: Electrical and Electronics Engineering
Code: 570231 (25)
Total Tutorial Periods: 12

UNIT I
Voltage SAG: The voltage sag and voltage swell, the causes of voltage sag and swell, indices to classify
voltage sag, the countermeasures.
UNIT II
Power Supply and Applications: Analysis, design and control of SMPS, UPS on line and off line,
Power supplies in telecommunication, power supplies in auto-mobiles, linear series and shunt voltage
regulators, IC voltage regulators, switching regulators. High frequency induction heating, dielectric
heating, microwave heating, electronic ballast, high power factor electronic ballast and applications.
UNIT III
Multilevel Converters and control: modeling and analysis of advance static VAR compensation,
multi level inverters, harmonic elimination method, ASVC structure, power converter control using
state space average models, SMC, fuzzy logic control.
UNIT IV
Filters: Passive and active filters for harmonic and reactive power compensation in two wire, three
wire and four wire AC systems, harmonics standard, power quality, surge suppressors, compensation
of arc furnaces and traction loads.
UNIT V
Case studies using DSP control techniques in active filters and power supplies.
TEXT BOOKS:

1. Power conditioning, F.F.Kuo


2. Erickson J., Handbook of Electrical Heating for Industry, IEEE Press
3. Rashid M.H., Power Electronics Handbook, Elsevier Press (Academic Press series)
REFERRENCE BOOKS:
4.

Bollen M.H.J., Understanding Power Quality and Voltage Sag, IEEE Press.

Chhattisgarh Swami Vivekanand Technical University Bhilai (C.G.)


Semester: M.TECH. 2nd
Specialization: Electrical Devices and Power System Engg..
Subject: Artificial intelligence and Neural Networking Branch: Electrical and Electronics Engineering
Total Theory Periods: 40
Code: 570232 (25)
Total Marks in End Semester Exam. : 100
Total Tutorial Periods: 12
Minimum number of class test to be conducted: 02

Unit-I
Introduction to Artificial Neural Networks: Fundamental concept of ANN. Neural Net Architectures.
Neural Learning. Generalized leaning rules.
Supervised Learning: Single-Layer networks. Perceptron training algorithm. Single node perceptron.
Multi-Layer networks. Back propagation (BP) training algorithm. Multi-layer perceptron (MLP)
training leaning factors. Application problems to electric drives.
Unit-II
Associative models: Basic concept & performance analysis of recurrent associative memory & Bidirectional associative memory. Auto-association. Hetero-associators. Recurrent networksMathematical foundation of discrete & continuous type Hopfield networks, transient response &
relaxation modeling.
Unit-III
Unsupervised Learning: Hamming net & MAXNET Unsupervised learning of clusters. Counterpropagation network, topologically organized networks-Self organizing maps. Adaptive resonance
theory, cluster discovery network (ART 1)
Unit-IV
Introduction to Fuzzy logic control: Crisp sets-Overview, Fuzzy sets: Basic concepts & types.
Classical set theory, Fuzzy sets versus Crisp sets (Properties). Fuzzy control from an industrial
perspective-knowledge based system for process control. Mathematics of fuzzy control- Approximate
reasoning representing set of rules. Fuzzy knowledge based design (FKBC) parameters. Structure of
FKBC, Introduction to rule and data base inference engine, choice of Fuzzification and Defuzzificaton
processes.
Unit V
Operations on Fuzzy Sets: Types of Fuzzy operators, Fuzzy Intersections: t-norms, Fuzzy Unions: tConorms, Fuzzy complement & aggregation operations. Fuzzy Arithmetic.
Nonlinear Fuzzy Control: Introduction, Control problem FKBC as a nonlinear Transfer element.
Types of FKBC. Implication and aggregation process.
TEXT BOOKS:

1. Introduction to Artificial Neural systems- Jacek M. Zurada. Jaico Publishing House Mumbai-2003.
2. Elements of Artificial Neural Networks- Kishan Mehrotra, C. K. Mohan, Sanjay Ranka. Penram
International Publishing (India)-2000.
REFERENCE BOOKS:

3. Fuzzy Sets and Fuzzy Logic Theory and Applications-George J. Klir & Bo Yuan. Prentice Hall of
India, New Delhi-2000.

Chhattisgarh Swami Vivekanand Technical University Bhilai (C.G.)


Semester: M.TECH. 2nd
Subject: Process Control
Total Theory Periods: 40
Total Marks in End Semester Exam. : 100
Minimum number of class test to be conducted: 02

Specialization: Electrical Devices and Power System Engg..


Branch: Electrical and Electronics Engineering
Code: 570233(25)
Total Tutorial Periods: 12

UNIT I
General Concepts: Review of general concepts, terminology, applications of process control .
Simulation and Modelling: Importance of simulation, terms used Simulation, Mathematical
modelling, Process dynamics of fluid flow and heat transfer systems, Mass transfer dynamics and
distillation
column,
Reaction
kinetics
of
chemical
processes.
UNIT II
Advanced Control Schemes: Structure, analysis and application of Cascade control, Selective control,
Ratio Control, Design of steady state and dynamic Feed forward controller, Feed forward combined
with feedback control, Structure, analysis and applications of inferential control, dead time and
inverse response compensators, Concepts and applications of Adaptive control, Model reference
adaptive
control,
Self
tuning
regulator
.
UNIT III
Design of Multiloop Controllers: Interactions and decoupling of control loops. Design of cross
controllers
and
selection
of
loops
using
Relative
Gain
Array
(RGA)
,
Digital Control: Sampling and reconstruction, Transform analysis of sampled-data systems: z
transform and its evaluation, inverse z transform, theorems of z transform, modified z-transform,
mapping of j plane to z plane, pulse transfer function, stability analysis in z-plane, mapping
approximation of z transform, numerical solution of differential equations, implementation of digital
controller,
case
studies
.
UNIT IV
Discrete Event System Modeling: Introduction to various methods of modeling, Automata Theory,
Introduction
to
Petri
Nets
.
State Space Analysis: State space representation of continuous and discrete time control systems,
Control theory, State space concepts, State variables, Pole placement design and state observes.
UNIT V
Controllability and Observability: Controllability and Observability of linear time invariant systems
and
the
relation
between
them.
Stability Analysis: Stability analysis, definition, first and second method of Liapunov, stability
analysis
of
linear
systems
.
Real Time Control: Characteristics and classes of real-time systems, program classification:
sequential, multi tasking, real time, concurrency and synchronization, design strategies, Reliabilty,
fault detection and fault tolerance, Real time operating systems, Distributed Computing systems:
distributed processing issues in distributed data base systems, distributed control operating system fir
digital control.
TEXT BOOKS:
1. Dubey G.K., Power Semiconductor Controlled Drive, Prentice Hall, New Jersey
2. Sen P.C., Thyristor Controlled DC Drives, Wiley, New York
3. Murphy J.M.D. and Turnbull F.G., Power Electronics Control of AC Motors, Franklin Book Co.
REFERENCE BOOKS:
4. Bose B.K., Power Electronics and AC Drives, Prentice Hall, New Jersey
5. Bose B.K., Power Electronics and Variable Frequency Drives-Technology and applications, IEEE
Pres

Chhattisgarh Swami Vivekanand Technical University Bhilai (C.G.)


Semester: M.TECH. 2nd
Subject: Power system Automation Lab
Total Theory Periods: 40
Total Marks in End Semester Exam. : 75

Specialization: Electrical Devices and Power System Engg..


Branch: Electrical and Electronics Engineering
Code: 570221 (25)

List of Experiments:
1)

Fundamental programming of Simatic S7

2)

Uploading and down loadig of PLC programming through optibus cable.

3)

Fault finding / troubleshooting & documentation

4)

Communication with SCADA software

5)

Power plant relay co ordination through PLC

6)

Process control for bottling plant through PLC

7)

AC motor speed control through PLC

8)

DC drives control through PLC

9)

Plc SCADA communication.

10)

DDE communication

Chhattisgarh Swami Vivekanand Technical University Bhilai (C.G.)


Semester: M.TECH. 2nd
Subject: Power system Simulation Lab
Total Theory Periods: 40
Total Marks in End Semester Exam. : 75

Specialization: Electrical Devices and Power System Engg.


Branch: Electrical and Electronics Engineering
Code: 570222 (25)

List of Experiments:
Development of algorithms & flowcharts and digital simulation of the following using MATLAB/ETAP5
Software package:
1

Introduction to MATLAB and other Simulation software

Z-bus and Y-bus formulation and their inversion.

Load flow studies (Gauss-Siedle method, Newton Raphson method)

Flow study with Fast Decoupled Method.

Fault analysis (balanced and unbalanced)

Solution of Swing equations by modified Eulers method.

Simulating Power Systems with Simulink

Solution of Power System equations using Modified Eulers Method.

Solution of Swing equations using Runge Kutta method (RK4).

10 Power system simulation by MATLAB using the Sim Power Systems Toolbox
11 Harmonic load flow studies.
12 Optimal load flow studies for IEEE 30 Bus.
13 Relay setting and co-ordination.

You might also like