Release Notes
EMC NetWorker Module for MEDITECH
Version 9.0.1
Release Notes
302-002-634
REV 01
June 29, 2016
These release notes contain supplemental information about this release of EMC
NetWorker Module for MEDITECH.
Topics include:
l
l
l
l
l
l
l
l
l
l
Revision history......................................................................................................... 2
Product description....................................................................................................2
New features and changes......................................................................................... 3
Fixed problems.......................................................................................................... 3
Environment and system requirements...................................................................... 3
Known problems and limitations................................................................................3
Documentation.......................................................................................................... 4
Software media, organization, and files..................................................................... 4
Installation................................................................................................................ 4
Troubleshooting and getting help...............................................................................4
Release Notes
Revision history
The following table presents the revision history of this document:
Table 1 Revision history
Revision Date
01
Description
June 29, 2016 First release of this document for the NetWorker Module for MEDITECH
9.0.1 release.
Product description
The EMC NetWorker Module for MEDITECH 9.0.1 enables you to perform the following
tasks:
l
Schedule and manage local replicas of the MEDITECH volumes when you use the
product with the EMC VNX, EMC Symmetrix VMAX, and EMC XtremIO storage
systems
Schedule and manage local and remote replicas of the MEDITECH volumes when you
use the product with VNX, Symmetrix VMAX, and EMC VPLEX and XtremIO along
with the RecoverPoint storage system
Integrate NetWorker with the MEDITECH application to perform the scheduled
backups and create disaster recovery replicas of the data without interrupting the
application
Integrate the product with MEDITECH Backup Facility (MBF) to take hardware or array
point-in-time snapshots to back up the MEDITECH data to the NetWorker devices
Perform Integrated Serverless Backups (ISBs) of the LUNs that VNX, Symmetrix VMAX,
XtremIO, and RecoverPoint support to a NetWorker device, such as tape, Data
Domain, and disk
Perform Integrated Disaster Recovery (IDR) backups to create bookmarks at regular
intervals according to the user-defined schedule on a RecoverPoint appliance, and
validate the bookmarks in the NetWorker Module for MEDITECH GUI
Perform in-frame point-in-time IDR backups by using the VNX's VNX-SNAP, Symmetrix
VMAX's VPSNAP, and XtremIO snapshot features
Perform backups and recoveries in a quick and predictable timeframe
View the backup and recovery information
Perform redirected recoveries of ISB data
NOTICE
In this guide, the term XtremIO if not succeeded by the term with RecoverPoint, indicates
a native XtremIO array. This guide contains the terms XtremIO and XtermIO with
RecoverPoint according to the context.
EMC NetWorker Module for MEDITECH 9.0.1 Release Notes
Release Notes
New features and changes
The following are the new features and changes in this release of the NetWorker Module
for MEDITECH:
l
The NetWorker Module for MEDITECH supports XtremIO to schedule and manage local
replicas of the MEDITECH volumes.
The NetWorker Module for MEDITECH supports redirected recoveries of ISB data.
Fixed problems
The following table lists the problems that have been fixed in this release of the
NetWorker Module for MEDITECH:
Table 2 Fixed problems
Defect
number
Description
240779
The NetWorker Module for MEDITECH backups fail even if one of the RecoverPoint
appliances that is added as a storage device in the GUI does not respond. The
backup failure is regardless of the RecoverPoint appliance's association with the
segments to be backed up.
246350
If you manually enable an image for a RecoverPoint consistency group, and perform
an ISB, the image is disabled because NetWorker Module for MEDITECH takes a
new snapshot, and enables the snapshot to copy the snapshot to media.
244742
When you perform a NetWorker Module for MEDITECH recovery, the Recover
Sessions panel on the Monitoring tab of the EMC NetWorker Administration
window does not display the recovery information. However, the recovery
succeeds.
Environment and system requirements
The EMC NetWorker Module for MEDITECH 9.0.1 Installation and Administration Guide
provides environment and system configurations requirements to operate the NetWorker
Module for MEDITECH.
Known problems and limitations
The following table lists the known problems and limitations in this release of the
NetWorker Module for MEDITECH:
Table 3 Known problems and limitations
Defect
number
Description
Workaround
180531
The NetWorker recover GUI does not support the
NetWorker Module for MEDITECH save set recovery.
Use the NetWorker
Module for MEDITECH
GUI.
New features and changes
Release Notes
Table 3 Known problems and limitations (continued)
Defect
number
Description
Workaround
194943
The snapshots that are created during the IDR backups
include unintended LUNs, which were not part of the
selected save set, from the same consistency group.
Performing an IDR recovery overwrites the existing LUNs
with the unintended LUNs.
Use the NaviSecCLI
command to recover
only the required
segments.
Also, if a backup fails because of reasons, such as the
disk is offline, either a file server or an MBI server is down,
and so on, you encounter this issue.
254513
Quiesce time for XtremIO segments sometimes can be
more than 5 seconds.
Documentation
The following EMC publications provide additional information:
l
EMC NetWorker Module for MEDITECH 9.0.1 Installation and Administration Guide
EMC NetWorker 9.0.1 Installation Guide
EMC NetWorker 9.0.1 Administration Guide
EMC VNX product documentation
EMC Symmetrix VMAX product documentation
EMC RecoverPoint product documentation
EMC VPLEX product documentation
EMC XtremIO product documentation
Software media, organization, and files
The EMC NetWorker Module for MEDITECH 9.0.1 Installation and Administration Guide
provides information about the NetWorker Module for MEDITECH software media,
organization, and files.
Installation
The EMC NetWorker Module for MEDITECH 9.0.1 Installation and Administration Guide
provides information about how to install and uninstall the NetWorker Module for
MEDITECH software.
Troubleshooting and getting help
The EMC support page provides access to licensing information, product documentation,
advisories, and downloads, as well as how-to and troubleshooting information. This
EMC NetWorker Module for MEDITECH 9.0.1 Release Notes
Release Notes
information may enable you to resolve a product issue before you contact EMC Customer
Support.
Support page
To access the support page:
1. Go to https://support.emc.com/products.
2. In the Find a Product by Name area, type a product name in the Lookup a Product by
Name box.
3. Select the product from the list that appears.
4. Click the arrow next to the Lookup a Product by Name box.
5. (Optional) Once you are on the product page, add the product to the My Saved
Products list by clicking Add to My Saved Products in the upper corner of the page.
Knowledgebase
The EMC Knowledgebase contains applicable solutions that you can search for either by
solution number (for example, ######) or by keyword.
To search the EMC Knowledgebase:
1. Click the Search link at the top of the page.
2. Type either the solution number or keywords in the search box.
3. (Optional) Limit the search to specific products by typing a product name in the
Scope by product box and then selecting the product from the list that appears.
4. Select Knowledgebase from the Scope by resource list.
5. (Optional) Specify advanced options by clicking Advanced options and specifying
values in the available fields.
6. Click the Search icon.
Online communities
Go to the EMC Community Network at https://community.emc.com for peer contacts,
conversations, and content on product support and solutions. Interactively engage online
with customers, partners, and certified professionals for all EMC products.
Live chat
To engage EMC Customer Support by using live interactive chat, click Join Live Chat on
the Service Center panel of the support page.
Service requests
For in-depth help from EMC Customer Support, submit a service request by clicking
Create Service Request on the Service Center panel of the support page.
Note
To open a service request, you must have a valid support agreement. Contact the EMC
sales representative for details about obtaining a valid support agreement or with
questions about the account.
To review an open service request, click the Service Center link on the Service Center
panel, and then click View and manage service requests.
Troubleshooting and getting help
Release Notes
Copyright 2007-2016 EMC Corporation. All rights reserved. Published in the USA.
Published June 29, 2016
EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without
notice.
The information in this publication is provided as is. EMC Corporation makes no representations or warranties of any kind with
respect to the information in this publication, and specifically disclaims implied warranties of merchantability or fitness for a
particular purpose. Use, copying, and distribution of any EMC software described in this publication requires an applicable software
license.
EMC, EMC, and the EMC logo are registered trademarks or trademarks of EMC Corporation in the United States and other countries.
All other trademarks used herein are the property of their respective owners.
For the most up-to-date regulatory document for your product line, go to EMC Online Support (https://support.emc.com).
6
EMC NetWorker Module for MEDITECH 9.0.1 Release Notes
