Scribd
Upload
452 views3 pages

Inline Tech Unit

tech

Uploaded by

Mohamed Mahmoud Rezk Dimo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
452 views3 pages

Inline Tech Unit

tech

Uploaded by

Mohamed Mahmoud Rezk Dimo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Unit No.

4958

Baker Oil Tools

Rev. A

LINER HANGER
TECHNICAL UNIT

Date: December 1, 2004


Page: 1 of 3

Hanger Packers

INLine Liner Hanger System


Product Family No. H29314
Introduction
The INLine Liner Hanger System has been
designed to improve upon current offering in the industry for 11-3/4" x 13-3/8" drilling liners by improving Packing Element differential capability,
hanging capacity and liner hanger integrity. The
INLine Liner Hanger System incorporates a ZXP
Liner Top Packer, an improved Hydraulic Set Liner
Hanger and an RS Packoff in one chassis.

Features and Benefits

Eliminates the hydraulic cylinder - improves


pressure integrity
Solid body design with integral setting piston
and slip seats
Incorporates hanger, packer and retrievable
cementing profile into a single common tool
Utilizes rupture disc technology with +/-5%
tolerance to control setting pressure
Eliminates welding on hanger body making
design applicable to CRA applications
Higher load capacity
Higher burst and collapse

Drawing No. 399-332


NOTE: Shear forces and pressures recommended in this Tech Unit are theoretical values only, calculated from nominal shear screw values and nominal piston areas.
Observed shear values in the well may vary due to tolerance in shear strength of screws, internal tool friction, mud lubricity, cuttings or other solids in the mud and a
number of other variables. Tools which shear "out of range" do not necessarily indicate a tool malfunction.
This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is revealed for limited purposes only. This document
is the property of Baker Hughes and is to be returned to Baker Hughes on request and may not be reproduced, used or disclosed to persons not having a need to
know consistent with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned or sold, either alone ore in
conjunction with equipment or product. 12/1/04 Baker Hughes Incorporated.

Unit No. 4958


Rev. A

INLine Liner Hanger System

12-01-04
Page 2 of 3

WARNING
Use of Baker equipment contrary to
manufacturers specification may result in
property damage, serious injury or fatality.

Specification Guide
INLine Liner Hanger Specs
Liner
Casing Weight Hanging
Casing
Weight
Capacity
Range
Size
Range
(lb)
(lb/ft)
(lb/ft)
11-3/4"- 11-7/8" 60-65 and 71.8 13-3/8" - 13-5/8" 68-72 and 88.2 1,000,000
* Note: 2000 psi and 2500 psi setting pressures can be provided on request.
Based upon 125Ksi MYS Body.
Liner
Size

Setting
Pressure
psi
1,500*

Burst Collapse Run-in


RH Profile
Rating Tensile
Rating
Compression
(Q-125) (Q-125) Capacity
Rating (lb)
(lb)
psi
psi
6,739
5,000 864,000
430,000

Bypass Area
Casing Size
13-3/8" 68.0 lb/ft
13-3/8" 72.0 lb/ft
13-5/8" 88.2 lb/ft

Set (in.2)
5.076
4.248
4.79

Unset (in.2)
5.494
4.172
4.714

INLine ZXP Packer Specifications


Casing

Casing
Weight
Range
(lb/ft)

13-3/8" - 13-5/8" 68-72 and 88.2

Differential
Pressure
Rating
(psi)

Setting
Force
Required
for Packer
(lb)

No. of
Shear
Pins

Shear Pin
Size

Material No.
of Shear Pins

Float Nut Size

5,000

60,000

10

7/16"-14 x 7/16"

HWW-GE1F-0FB

11.000"
(H07-81736-00)

Other Specifications
Max OD
Body ID
(in.)
(in.)
12.13
10.686
400oF can be provided on request.

Operation
The INLine Liner Hanger Packer System is
operated just as if you were running a conventional ZXP/Hydraulic Set Liner Hanger system.
The running tool that is used is the 2RH Running Tool which has a right hand release mechanism. When the tool is at setting depth, drop
ball and pressure slightly over the setting pressure of the hanger which will be set for 1,500 psi
(2,000, or 2,500 psi on request). When the rupture disk ruptures, the small piston will move out
and make contact with the connecting rod. The
connecting rod is keeping a snap ring, that is

Packoff Rating
(psi)
5,000

Temperature Rating
(oF)
250

housed underneath the spring housing, in the biased


inwards position. The snap ring is what is keeping the
tool in the run-in position. When the connecting rod is
pushed out of the way, the snap ring is allowed to
come out of the groove on the body and unlock the
spring housing. The spring housing has 32 springs
that will then drive the slips into the casing. Once this
has occurred, you can then slack off the liner weight
and release your running tool. After the cement job
has been done, you can pull the packer setting dog
sub out and set the packer with slack off weight. The
packer shears at 49,000 lb and requires 60,000 lb to
set.

INLine Liner Hanger System

INLine ZXP Packer


Dimensional Data Drawing No. 399-332

Dimensional Data (inches)


Refer to Drawing No. 399-332.
A
216.25 (10 Ext)
336.25 (20 Ext)

12.13

11.5

10.686

12.13

12.095

12.13

12.085

12.13

Unit No. 4958


Rev. A
12-01-04
Page 3 of 3

You might also like