M1 Star Marposs

Testar, a Marposs division, is pleased to introduce its new catalogue of
products to satisfy your gauging needs.
TESTARs mission is to develop and offer innovative measuring

component products to the Marposs worldwide sales organizations,
end user and gauge maker markets for the local production of
high quality gauge solutions.
TESTAR is organized with a team of marketing and R&D professionals dedicated for over 30 years to developing and manufacturing
successful products.
TESTAR headquarters team
Show Room
Research & Development

center
Production, inspection
and calibration of measuring transducers
All TESTAR products originate in the Research and Development center within World Headquarters in Italy.
Here the knowledge gained from both customer applications and our own internal manufacturing operations,
is the basis for developing new ideas.
TESTARs product development process integrates Marketing, Research and Development, Engineering and
Manufacturing through simultaneous engineering methodologies. As a result, new product projects include
everything from production technologies to commercial strategies.
Testars manufacturing area operates with the most advanced equipment to assure the quality of its products.
Metrology laboratory
All necessary calibration and component inspections are performed in a comprehensively equipped SIT
accreditated Metrology Laboratory (No. 84).
An advanced information system, optimized for data transmission among

the various distribution centers, allows TESTAR to efficiently share information and manage real-time communication. To support our Customers
committment to quality, TESTAR, as a Division of MARPOSS, operates
under Companys certified procedures. MARPOSS has an integrated
system to manage the Company quality, the environment and safety,
attested by ISO 9001:2000, ISO 14001:2004 and OHSAS 18001 certifications; it has further been qualified EAQF 94 and has obtained the
Q1-Award. All of the worldwide sales organizations are ISO 9001:2000
certified. These certifications represent the companies capacity to assure the quality and reliability of products and overall service. TESTAR
products, sales and service support are available through 22 direct sales
and service organizations, and 11 exclusive distributors.
OEM - Products / Private Label
Measuring armsets
Pencil Probes
Micro-Column,
single channel
display
Compact transmission with axial

movement
Electronic bore
gauges
Embedded
gauge computer
OD Snap gauges
USB interface box
Column amplifiers with

1, 2 or 4 LVDT/HBT
inputs or 1 AIR input
Modular measuring system
YOUR NAME & LOGO = YOUR PRODUCT

Testar products are also available with own brand name and logo (Private Label). Testar offer an unparalleled
product range which includes not only displacement transducers, but a complete line of mechanical measuring
devices that can be used to design high-quality gauging systems, and modular system components that are
easily assembled to solve most requirements.
To reduce design costs a CD-Rom library of .dxf CAD files is also available.
As a complement to the measuring devices, various interface boxes and electronic display units, from simple
micro-column to powerful SPC embedded gauge computer, are available.
For the most demanding applications, a Windows based SPC software package can be used with our industrial
computer or with a commercial computer. Thanks to a long lasting experience in the development of manual
gauges for the workshop environment, TESTAR can offer best product quality at an optimum price-performance
ratio.
Transducers and Measurement Transmissions

Red Crown 2 - Quick Probe
AMA - Quick Block - A 124
Bore Gauges Line

M1 STAR MBG - i-Wave - M1 STAR EBG
M1 WAVE - M1 MULTI
M1 STAR COUNTERSINK - M1 AIR
Forks and Ring Gauges

M3 STAR - Quick Snap - M4 STAR - M4
Bench Gauges
Quick Set line - Quick Set Universal
Indicators and Electronic Display Units

TD - Quick Digit - E4 - Quick Read - E4N
E4N Wave - NEMO - MERLIN - MERLIN mobile - E9066t
Interface Boxes for Data Acquisition

USB INTERFACE - EASY BOX - GAGE BOX - TCI
Softwares
Quick SPC
Marposs manufactures each

pencil probe to strict quality standards, is certified for its integrated
system of quality, environment &
safety, according to international
standards.
ISO 9001(Quality Management)
ISO 14001(Environmental Management )
OHSAS 18001(Safety Management )
A dedicated design & production
team using the latest manufacturing procedures and equipment
guarantees the product meets
the all the expectation of the customer for quality measuring solutions.
Red Crown2 is designed to be in
compliance with the latest world
standards for RoHS/WEEE.
BORE GAUGES LINE

SOFTWARES
The RedCrown2 line and its digitalized versions Digi Crown 2 and Red
Crown 2 USB, offers a variety of measuring solutions..
The two main families, Standard (with Gaiter-IP 65) and Soft Touch
(without Gaiter-IP 54), are available with the following options:
With HBT and LVDT type transducers
Five standard measuring ranges: 1mm, 2mm, 5mm,10mm & 20mm
Actuation / retraction by Spring, Pneumatic, or Vacuum methods.
Analogue connection: Marposs standard connector or compatible
connectors for interfacing with competitor electronics world wide.
Digital connection for Marposs DigiCrown networks
Direct USB connector for simple interfacing to computers
Cable only allows customer to connect using their preferred type of
connector
OEM private label versions with customized body Logos, your
part numbers and dedicated packaging for your product.
FORKS AND RING GAUGES
The new precision engineered design incorporates ball cage movements, improved protection from electrical interference, by the introduction of Mu-metal shielding and added robustness throughout, all
produced from a refined manufacturing process. Performance of RedCrown2 is guaranteed to give excellent accuracy under the harshest
conditions where high reliability is constantly required in the manufacturing field.
BENCH GAUGES
QUALITY ASSURANCE
INDICATORS AND ELECTRONIC

DISPLAY UNITS
product features
INTERFACE BOXES
FOR DATA ACQUISITION
Evolving from our customers

latest quality requirements RedCrown2 is the new line of pencil
probes developed to meet industrys global performance specifications. As a result of experience
in the metrology market place &
with input from measurement
integrators throughout the world
RedCrown2 sets the new metrological standard.
TRANSDUCERS AND
MEASUREMENT TRANSMISSIONS
the new
generation of
pencil probes
Red Crown 2 - 1
TRANSDUCERS AND
The Product Line
BORE GAUGES LINE
A line of analogue pencil probes, available with

LVDT and HBT circuitry.
Digitized version, with

high levels of accuracy
and versatility used in
combination with
Digi Net.
BENCH GAUGES
A probe version linearized

with the USB interface integrated in the (standard USB)
connector ready to be used
via direct connection to any
USB host device.

DISPLAY UNITS
INTERFACE BOXES
SOFTWARES
Red Crown 2 - 2
- MARPOSS
(HBT/LVDT)
- COMPATIBLE
(HBT/LVDT)
- UNPLUGGED
(HBT/LVDT)
- DIGI CROWN
VACUUM RETRACT
2LR
2
DIGITAL
- USB
2,5
5
DIGITAL
SPRING PUSH
PNEUMATIC PUSH
- DIGI CROWN
- USB
10
VACUUM RETRACT
Red Crown2 is a line of pencil probes available in STANDARD (with gaiter IP65) or SOFT TOUCH (without
gaiter IP54) configuration, with highly precise ball cage movements and various connection options according to the conditioning and display interfaces used.
The analogue version, with LVDT or HBT transducer, allows the use of the product with standard Marposs
amplifiers, or with third party amplifiers available on the market.
These probes are available both with and without connector (UNPLUGGED).
Red Crown2 USB is the version with USB connector, which provides high levels of measuring accuracy and
is easy to use.
- ACCURACY. The high level of accuracy is guaranteed during the production when the compensation of
the linearity and sensitivity errors are stored in each probe. Each unique unit is certified and identified by a
serial number, to ensure complete traceability.
- PLUG & GAUGE. All the conditioning and interface electronics of the transducer are integrated in the USB
connector, therefore no additional connecting devices are required to use the product.
- EASY TO USE. The measurement can be displayed with Marposs electronics (Nemo, Merlin, E9066) or by
connecting directly with USB Host devices, where Red Crown2 USB is visible as a standard virtual COM.
- APPLICATIONS. Both static and dynamic measurements can be performed (maximum sampling frequency
1000 samples/s).
- SOFTWARE INTERFACES. For the measurement integration the Marposs software (U-Com, Easy Acquisition and QSPC) are available; alternatively a simple list of protocol commands for an easy and quick integration in other programming environments can be used.
SOFTWARES
Digi Crown2, digitized version, is the probe family that provides high levels of measuring accuracy combined with the Digi Net network interface.
Digi Crown2 and Digi Net together provide the following advantages:
- ACCURACY. High levels of measuring accuracy is guaranteed by the linearization data stored in the memory of the connector. The Digi Net interface box is able to read the error map and perform an automatic
compensation.
- PLUG & GAUGE. The memory in the connector allows any Digi Crown2 probe to be connected to the Digi
Net network without requiring individual probe programming.
- FLEXIBILITY. The modularity of the system can create a network where 1 input-channel* and 2 inputchannel* interface boxes are provided with the exact number of probes required. In a comprehensive Digi
Net the Digi Crown2 can be combined with any type of incremental sensor, with analogue output sensors,
and various I/O interfaces to provide a complete machine integration.
- VERSATILITY. The application can be designed by selecting the most suitable probe for the measuring task
(for any measuring range the models are available with spring or pneumatic push, with axial or radial cable
output and with or without gasket), and connecting it to the interface* box.
- APPLICATIONS. Both static and synchronised dynamic measurements can be performed (maximum sampling frequency 4,000 samples/sec)
- CONNECTIVITY. The Digi Crown2 probe is designed for the Digi Net system, but it also connects to the
Marposs standard line of LVDT amplifiers.
BORE GAUGES LINE
0,5
- MARPOSS
(HBT/LVDT)
- COMPATIBLE
(HBT/LVDT)
- UNPLUGGED
(HBT/LVDT)
SOFT TOUCH
BENCH GAUGES
ANALOG

DISPLAY UNITS
PNEUMATIC PUSH
RANGE
INTERFACE BOXES
SPRING PUSH
ANALOG
TRANSDUCERS AND
STANDARD
Red Crown 2 - 3
STANDARD - AXIAL - SPRING
A
B
A
B
C
F
3,7
1 mm
84,85
54,10
16,75
2,00
1,50
15,20
22,00
-
10
115,95 163,95
79,65 112,50
22,30 39,45
2,00
1,50
15,20 15,20
22,00 22,00
-
PV
0,023
0,70
0,023
0,70
0,6
0,9
PP
0,03
0,7 2,3
0,5 1
7,5 14,5
A
4
11
8
PV
0,02
0,70
0,6
0,9
3PR10L1399 FR21
F21
3PR10L0199
2
Fluoroelastometer
0,15
0,25
(-10)+(+65)
(-20)+(+100)
IP65
carbide
M2,5
-
2
Fluoroelastometer
0,15
0,25
(-10)+(+65)
(-20)+(+100)
IP65
carbide
M2,5
3PR10L1799 FV21
2
3
8
2 mm LongRange
3PR10L0599 FVA21
3PR10L1759 FP21
PP
0,04
0,8 2,5
0,5 1
7,5 14,5
3PR02L1200 FR10
3PR02L0000 F10
3PR01L1200 FR05
F05
3PR10N1799 HV21
Red Crown 2 - 4
(0,2+K*1)
(0,2+K*1)
Accuracy error
(m)
* Movement S= spring - PP= pneumatic push - V= vacuum - PV= push/vacuum - ** Accuracy = +/-MAX(0,5+2*K;7*K)
3PD02L1760 VD02
3PD02L0560 VAD02
3PD02L1600 PD02
3PR10N0599 HVA21
3PR10N1759 HP21
H21
3PR10N0199
3PR10N0559 HPA21
3PR02Y1760 UV10
3PR02Y0560 UVA10
3PR02Y1600 UP10
3PR02Y1200 UR10
3PR10N1399 HR21
3PR02N1760 HV10
3PR02N0560 HVA10
3PR02N1600 HP10
3PR02N0400 HPA10
3PR02N1200 HR10
3PR02N0000 H10
U10
3PR02Y0400 UPA10
3PD02L0400 PAD02
ORDER CODE
3PD02L1200 RD02
SOFTWARES
TRADE NAME
73,75
MAX(2+|2*K|;|7*K|)(***)
3,5355V RMS with load 2K0,1%/7,5kHz
(0,2+K*1)
D02
(0,2+K*1)
3PD02L0000
(m)
3PR01Y1200 UR05
ORDER CODE
73,75
MAX(1+|2*K|;|7*K|)(***)
3PD01L1200 RD01
INTERFACE BOXES
TRADE NAME
Accuracy error
DIGI CROWN 2
73,75
(**)
3PR02Y0000
3PR01N0000
Sensitivity
(mV/V/mm)
Accuracy error
(m)
Calibration spec.
Red Crown 2 USB
3PR01N1200 HR05
H05
ORDER CODE
U05

DISPLAY UNITS
TRADE NAME
3PR01Y0000
BENCH GAUGES
3PR01L0000
107,85
88,58
25,30
2,00
1,50
15,20
22,00
-
Sensitivity
(mV/V/mm)
230
230
230
Accuracy error
(m)
(**)
MAX(1+|2*K|;|7*K|)(***)
MAX(2+|2*K|;|7*K|)(***)
Calibration spec.
3,5355V RMS with load 1M//360pF/7,5kHz
Red Crown 2 HBT marposs (for TESA compatible models please refer to dedicated section on page 6, 7, 10, 11)
D01
ORDER CODE
3PR10L0559 FPA21
0,5 mm
A
R
A
R
Cable (A=axial - R=radial)
Movement (*)
S
S
Measuring range
(mm)
1
Mechanical travel
(mm)
1,5
Body
(mm)
8
Spring strenght
(N/mm15%)
0,17
0,14
Measuring force
(N25%)
1,00
0,70
PP pressure bar
psi
Vacuum retract pressure bar
psi
Cable length
(m)
2
Gasket
Fluoroelast.
Repeatability (m)
0,15
Thermal drift
(m/C)
0,25
Operating temperature
(C)
(-10)+(+65)
Storage temperature
(C)
(-20)+(+100)
Protection grade
IP65
Contact type
carbide
Contact tread
M2,5
Red Crown 2 LVDT marposs
TRADE NAME
1 2LR 2,5 5
57,78
31,20
12,80
2,00
1,30
-
F= Max. pretravel adj. value
MECHANICAL SPECIFICATIONS
05
37,50
17,20
7,10
2,00
1,50
0,70
15,20
-
A
B
C
D
E
F
G
H
L
M
114,45 162,45
86,60 120,65
22,30 39,45
2,00 2,00
1,50
22,00 22,00
-
83,35
61,05
16,75
2,00
1,50
22,00
-
3PD01L0000
BORE GAUGES LINE
3,7
F
F
106,35
75,50
25,30
2,00
1,50
22,00
-
D
C
3PR02L1760 FV10
59,40
41,25
12,80
2,00
1,30
22,00
-
10
3PR02L0560 FVA10
36,20
24,35
7,10
2,00
2,05
0,70
-
STANDARD - RADIAL- SPRING
1 2LR 2,5 5
3PR02L1600 FP10
A
B
C
D
E
F
G
H
L
M
05
3PR02L0400 FPA10
3,7
TRANSDUCERS AND
Standard
*** K= Reading (mm)
0,70
0,6
0,9
A
20
21
8
PV
0,70
0,6
0,9
3PR20L1200 FR100
(0,6+K*2)
Red Crown 2 - 5
D20
3PD20L0000
3PD20L0400 PAD20
3PD20L1200 RD20
(1,2+K*2)

DISPLAY UNITS
UPA100
-
UV100
UR100
-
U100
-
UVA100
7,375
MAX(10+|2*K|;|7*K|)(***)
(1,2+K*2)
3PD10L1760 VD10
3PD10L0560 VAD10
3PD10L0400 PAD10
3PD10L1200 RD10
D10
3PD10L0000
0,7 2,4
0,5 1
7,5 14,5
3PR10Y1760 UV50
3PR10Y0560 UVA50
3PR10Y1200 UR50
U50
3PR10Y0000
PP
23
MAX(10+|2*K|;|7*K|)(***)
3PR20N1200 HR100
3PR10N1760 HV50
3PR10N0560 HVA50
H50
3PR10N0000
3PR10N1200 HR50
2
Fluoroelastometer
0,15
0,25
(-10)+(+65)
(-20)+(+100)
IP65
carbide
M2,5
3PR10L1760 FV50
3PR10L0560 FVA50
F50
3PR10L0000
3PR10L1600 FP50
3PR10L1200 FR50
10
115,95 163,95
78,15 112,50
22,30 39,45
2,00
1,50
7,50 7,50
15,20 15,20
22,00 22,00
-
(0,6+K*2)
3PD05L1760 VD05
3PD05L0560 VAD05
3PD05L1600 PD05
3PD05L0400 PAD05
3PD05L1200 RD05
(0,6+K*2)
D05
0,02
0,70
29,5
MAX(5+|2*K|;|7*K|)(***)
3PR05Y1760 UV25
3PR05Y0560 UVA25
3PR05Y1600 UP25
3PR05Y0400 UPA25
3PR05Y1200 UR25
3PR05Y0000
U25
36,875
MAX(2,5+|2*K|;|7*K|)(***)
3PD05L0000
PV
115
MAX(5+|2*K|;|7*K|)(***)
3PR05N1760 HV25
3PR05N0560 HVA25
3PR05N1600 HP25
3PR05N0400 HPA25
3PR05N1200 HR25
3PR05N0000
H25
115
MAX(2,5+|2*K|;|7*K|)(***)
(0,6+K*2)
2
Fluoroelastometer
0,15
0,25
(-10)+(+65)
(-20)+(+100)
IP65
carbide
M2,5
3PR05L1760 FV25
3PR05L0560 FVA25
3PR05L1600 FP25
3PR05L0400 FPA25
3PR05L1200 FR25
3PR05L0000 F25
2
Fluoroelastometer
0,15
0,25
(-10)+(+65)
(-20)+(+100)
IP65
carbide
M2,5
3PR20L1600 FP100
0,6
0,9
0,02
0,7 2,4
0,5 1
7,5 14,5
10
11
8
84,85
52,60
16,75
2,00
1,50
7,50
15,20
22,00
-
10 mm
3PR20N1600 HP100
0,03
0,70
PP
UP100
3PD20L1600 PD20
0,02
0,70
3PR20L0400 FPA100
PV
3PR10N1600 HP50
3PR10Y1600 UP50
5
6,6
8
5 mm
3PD10L1600 PD10
0,03
0,7 2,3
0,5 1
7,5 14,5
3PR10L0400 FPA50
PP
3PR10N0400 HPA50
0,023
0,70
3PR10Y0400 UPA50
107,85
68,55
25,30
2,00
1,50
7,50
15,20
22,00
-
3PR20N0400 HPA100
2,5 mm
1 2LR 2,5 5
71,75
36,10
12,80
2,00
1,30
7,50
15,20
22,00
-
BORE GAUGES LINE
3,7
BENCH GAUGES
05
INTERFACE BOXES
A
B
C
D
E
F
G
H
L
M
A
B
SOFTWARES
117,75 166,75
86,60 120,65
22,30 39,45
2,00
1,50
6,00 6,00
86,65
61,05
16,75
2,00
1,50
6,00
3PR20L0000 F100
109,65
75,50
25,30
2,00
1,50
22,00
6,00
3PR20N0000 H100
65,98
44,55
12,80
2,00
1,30
6,00
10
3,7
STANDARD - RADIAL - PNEUMATIC PUSH
1 2LR 2,5 5
A
B
C
D
E
F
G
H
L
M
A
C
05
TRANSDUCERS AND
STANDARD - AXIAL - PNEUMATIC PUSH
SOFT TOUCH - AXIAL - SPRING

114,45 162,45
86,60 120,65
16,90 39,45
22,00 22,00
-
88,50
54,10
20,40
2,00
1,50
15,20
22,00
-
10
115,95 163,95
79,65 112,50
16,90 39,45
15,20 15,20
22,00 22,00
-
A
4
11
8
0,010
0,18 1,23
0,5 2
7,3 29
PV
FV21L
0,09 1,41
0,125 2
1,825 29
0,6
0,9
FVA21L
-
3PR10L6759 FP21L
3PR10L5559 FPA21L
3PR10L6399 FR21L
F21L
2
0,15
0,25
(-10)+(+65)
(-20)+(+100)
IP50 (IP54 PP version)
carbide
M2,5
3PR10L7199 FPV21L
3PR10L5999 FPVA21L
PP
3PR10T7199 HPV21L
3PR10T5999 HPVA21L
HV21L
-
HVA21L
-
3PR10T6759 HP21L
3PR10T5559 HPA21L
3PR10T6399 HR21L
3PR10T5199 H21L
Red Crown 2 - 6
* Movement S= spring - PP= pneumatic push - V= vacuum - PV= push/vacuum - ** Accuracy = +/-MAX(0,5+2*K;7*K)
(0,2+K*1)
3PD02L7000 PVD02L
SOFTWARES
3PD02L5800 PVAD02L
(0,2+K*1)
3PR02Y7000 UPV10L
73,75
MAX(2+|2*K|;|7*K|)(***)
3PR02Y5800 UPVA10L
3PR02Y6600 UP10L
3PR02Y6200 UR10L
107,85
68,55
28,80
15,20
22,00
-
230
MAX(2+|2*K|;|7*K|)(***)
3PR02T7000 HPV10L
3PR02T5800 HPVA10L
3PR02T6600 HP10L
3PR02T6200 HR10L
3PR02T5000 H10L
3PR02Y5000 U10L
0,016
0,30
3PR10L5199
0,09 1,41
0,125 2
1,825 29
0,6
0,9
PV
2
0,15
0,25
(-10)+(+65)
(-20)+(+100)
IP50(IP54 PP version)
Nylon (PA66)
M2,5
3PR02L7000 FPV10L
2
3
8
0,18 1,23
0,5 2
7,3 29
3PD02L6200 RD02L
(0,2+K*1)
61,43
31,20
16,40
2,00
1,30
15,20
22,00
-
2 mm LongRange
3PR02L5800 FPVA10L
0,045
F10L
3PR02L5000
PP
73,75
MAX(1+|2*K|;|7*K|)(***)
3V RMS with load 2k 0,1%/13kHz
3PD02L5000 D02L
(m)
ORDER CODE
RD01L
(0,2+K*1)
3PD01L5000 D01L
INTERFACE BOXES
(m)
1 2LR 2,5 5
3PR02L6600 FP10L
FR05L
HR05L
-
73,75
(**)
Sensitivity
(mV/V/mm)
Accuracy error
(m)
Calibration spec.
Red Crown 2 USB
TRADE NAME
3,7
230
MAX(1+|2*K|;|7*K|)(***)
ORDER CODE
Accuracy error
230
(**)

DISPLAY UNITS
TRADE NAME
Accuracy error
DIGI CROWN 2
05
A
B
C
D
E
F
G
H
L
M
1 mm
3PR02L6200 FR10L
F05L
3PR01L5000
BENCH GAUGES
Sensitivity
(mV/V/mm)
Accuracy error
(m)
Calibration spec.
Red Crown 2 HBT TESA
3PR01T5000 H05L
ORDER CODE
3PR01Y5000 U05L
BORE GAUGES LINE
TRADE NAME
ORDER CODE
A
B
SOFT TOUCH
0,5 mm
A
R
A
R
Movement (*)
S
S
Measuring range
(mm)
1
Mechanical travel
(mm)
1,5
Body
(mm)
8
Spring strenght
(N/mm15%)
0,070
0,06
Total Measuring force
(N25%)
0,40
0,30
PP pressure bar
psi
psi
Cable length
(m)
2
Repeatability (m)
0,15
Thermal drift
(m/C)
0,25
(C)
(-10)+(+65)
Storage temperature
(C)
(-20)+(+100)
Protection grade
IP50
Contact type
Nylon (PA66)
Contact tread
M2,5
TRADE NAME
D
C
87,00
61,05
20,40
2,00
1,50
22,00
-
3PD02L6600 PD02L
F
F
3,7
106,35
75,50
28,80
22,00
-
3PR02L5400 FPA10L
L
B
63,00
41,25
16,40
2,00
1,30
22,00
-
3PR02T5400 HPA10L
A
D
39,90
24,35
10,65
2,00
2,05
0,70
-
10
3PR02Y5400 UPA10L
A
B
C
D
E
F
G
H
L
M
SOFT TOUCH - RADIAL - SPRING
1 2LR 2,5 5
3PD02L5400 PAD02L
3,7
05
TRANSDUCERS AND
Soft Touch
*** K= Reading (mm)
20
21
8
0,010
0,18 1,23
0,5 2
7,3 29
3PR20L6600 FP100L
3PR20L5400 FPA100L
3PR20L6200 FR100L
PV
0,09 1,41
0,125 2
1,825 29
0,6
0,9
3PR20T7000 HPV100L
3PR20T5800 HPVA100L
3PR20T6600 HP100L
3PR20T5400 HPA100L
23
MAX(10+|2*K|;|7*K|)(***)
UPV100L
3PD20L7000 PVD20L
UPVA100L
3PD20L5800 PVAD20L
UPA100L
-
UP100L
UR100L
-
U100L
-
3PD20L6600 PD20L
3PD20L6200 RD20L
3PD20L5000 D20L
3PD10L7000 PVD10L
Red Crown 2 - 7
3PD10L5800 PVAD10L
(0,6+K*2)
(1,2+K*2)
BORE GAUGES LINE
3PR20L7000 FPV100L
PP
3PR20L5800 FPVA100L
(1,2+K*2)
3PD10L6600 PD10L
3PD10L5400 PAD10L
3PD10L6200 RD10L
10
115,95 163,95
78,15 112,50
16,90 39,45
7,50 7,50
15,20 15,20
22,00 22,00
-
7,375
MAX(10+|2*K|;|7*K|)(***)
3PR10Y7000 UPV50L
3PR10Y5800 UPVA50L
3PR10Y6600 UP50L
3PR10Y5000 U50L
3PD10L5000 D10L
3PD05L7000 PVD05L
3PD05L5800 PVAD05L
88,50
52,60
20,40
2,00
1,50
7,50
15,20
22,00
-
2
0,15
0,25
(-10)+(+65)
(-20)+(+100)
Nylon (PA66)
M2,5
3PR20T6200 HR100L
3PR10T7000 HPV50L
3PR10T5800 HPVA50L
3PR10T6600 HP50L
115
MAX(5+|2*K|;|7*K|)(***)
0,030
0,30
3PR20L5000 F100L
FV50L
-
0,09 1,41
0,125 2
1,825 29
0,6
0,9
3PR20T5000 H100LL
FVA50L
-
3PR10L6600 FP50L
3PR10L5400 FPA50L
PV
(0,6+K*2)
3PD05L6600 PD05L
3PD05L5400 PAD05L
3PD05L6200 RD05L
10
11
8
29,5
MAX(5+|2*K|;|7*K|)(***)
3PR05Y7000 UPV25L
3PR05Y5800 UPVA25L
3PR05Y6600 UP25L
3PR05Y5400 UPA25L
3PR05Y6200 UR25L
3PR05Y5000 U25L
107,85
68,55
28,80
7,50
15,20
22,00
-
10 mm
0,07
0,18 1,23
0,5 2
7,3 29
(0,6+K*2)
3PD05L5000 D05L
2
0,15
0,25
(-10)+(+65)
(-20)+(+100)
Nylon (PA66)
M2,5
73,75
MAX(2,5+|2*K|;|7*K|)(***)
(0,6+K*2)
PP
3PR10L7000 FPV50L
0,02
0,30
3PR10T5400 HPA50L
3PR05T7000 HPV25L
3PR05T5800 HPVA25L
3PR10Y5400 UPA50L
3PR05T6600 HP25L
3PR05T5400 HPA25L
3PR05T6200 HR25L
3PR05T5000 H25L
115
MAX(2,5+|2*K|;|7*K|)(***)
3PR10L6200 FR50L
3PR05L6600 FP25L
3PR05L5400 FPA25L
3PR05L6200 FR25L
3PR05L5000
F25L
2
0,15
0,25
(-10)+(+65)
(-20)+(+100)
Nylon (PA66)
M2,5
0,09 1,41
0,125 2
1,825 29
0,6
0,9
3PR10T6200 HR50L
0,01
0,18 1,23
0,5 2
7,3 29
PV
3PR10Y6200 UR50L
F50L
5
6,6
8
5 mm
3PR10L5000
3PR10T5000 H50L
PP
3PR05L7000 FPV25L
0,016
0,30
3PR05L5800 FPVA25L
66,30
36,10
16,40
2,00
1,30
7,50
15,20
22,00
-
3PR10L5800 FPVA50L
2,5 mm
1 2LR 2,5 5
BENCH GAUGES
3,7
05

DISPLAY UNITS
A
B
C
D
E
F
G
H
L
M
INTERFACE BOXES
A
B
SOFTWARES
117,75 165,75
86,60 120,65
16,90 39,45
6,00 6,00
90,30
61,05
20,40
2,00
1,50
6,00
109,65
75,50
28,80
6,00
3PD20L5400 PAD20L
69,63
44,55
16,40
2,00
1,30
6,00
10
3,7
A
B
C
D
E
F
G
H
L
M
SOFT TOUCH - RADIAL - PNEUMATIC PUSH
1 2LR 2,5 5
05
TRANSDUCERS AND
SOFT TOUCH - AXIAL - PNEUMATIC PUSH
Sensitivity
Linearity error
Calibration spec.
(mV/V/mm)
(m)
PV
3PR10M1799 FV21
3PR10M0599 FVA21
HV21
3PR10Z1799
3PR10Z0599 HVA21
HP21
3PR10Z1759
HR21
3PR10Z1399
3PR10Z0559 HPA21
H21
3PR10Z0199
83 5%
MAX(2;|5*K|)(***)
* Movement S= spring - PP= pneumatic push - V= vacuum - PV= push/vacuum - ** Accuracy 0,5 = +/-MAX(0,5;5*K) -
INTERFACE BOXES
SOFTWARES
Red Crown 2 - 8
3PR10M1759 FP21
F21
3PR10M0199
3PR10M0559 FPA21
HV10
233 5%
MAX(2;|5*K|)(***)
3PR02Z1760
3PR02Z0560 HVA10
3PR10M1399 FR21
3PR02M1760 FV10
3PR02M0560 FVA10
3PR02M1600 FP10
86 5%
83 5%
(**)
MAX(1;|5*K|)(***)
3,5355V RMS with load 2k0,1%/7,5kHz
0,02
0,70
3,5
Fluoroelastometer
0,15
0,25
(-10)+(+65)
(-20)+(+100)
IP65
carbide
M2,5
HP10
0,03
0,7 2,3
0,5 1
7,5 14,5
0,023
0,70
0,023
0,75
3,5
Fluoroelastometer
0,15
0,25
(-10)+(+65)
(-20)+(+100)
IP65
carbide
M2,5
3PR02Z1600
A
PV
0,6
0,9
3PR02Z0400 HPA10
HR10
3PR02Z1200
R
V
4
11
8
233 5%
233 5%
(**)
MAX(1;|5*K|)(***)
H10
PP
0,6
0,9
3PR02M0400 FPA10
3PR02M1200 FR10
F10
3PR02M0000
R
V
0,04
0,8 2,5
0,5 1
7,5 14,5
3PR02Z0000

DISPLAY UNITS
ORDER CODE
2 mm LongRange
A
2
3
8
HR05
TRADE NAME
R
PP
3PR01Z1200
BENCH GAUGES
Sensitivity
(mV/V/mm)
Linearity error
(m)
Calibration spec.
Red Crown 2 HBT marposs
3PR01M1200 FR05
F05
ORDER CODE
3PR01M0000
TRADE NAME
1 mm
H05
BORE GAUGES LINE
STANDARD
0,5 mm
A
R
A
R
Movement (*)
S
S
Measuring range
(mm)
1
Mechanical travel
(mm)
1,5
Body
(mm)
8
Spring strenght
(N/mm15%)
0,17
0,14
Measuring force
(N25%)
1,00
0,75
PP pressure bar
psi
psi
Cable length
(m)
3,5
Gasket
Fluoroelast.
Repeatability (m)
0,15
Thermal drift
(m/C)
0,25
(C)
(-10)+(+65)
Storage temperature
(C)
(-20)+(+100)
Protection grade
IP65
Contact type
carbide
Contact tread
M2,5
3PR01Z0000
TRANSDUCERS AND
Unplugged
*** K= Reading (mm)
PV
PV
0,02
0,70
0,03
0,70
0,02
0,7 2,4
0,5 1
7,5 14,5
PP
20
21
8
0,02
0,70
0,70
0,5 1
7,5 14,5
0,70
3PR20M1600 FP100
3PR20M0400 FPA100
3PR20M1200 FR100
H100
3PR20Z0000
3PR20Z1600 HP100
3PR20Z0400 HPA100
37 5%
MAX(10;|5*K|)(***)
SOFTWARES
INTERFACE BOXES
53,5 5%
MAX(5;|5*K|)(***)
3PR20Z1200 HR100
HV50
23 5%
MAX(10;|5*K|)(***)
3PR10Z1760
HR50
3PR10Z1200
HP50
H50
3PR10Z0000
3PR10Z1600
3PR10Z0400 HPA50
3PR20M0000 F100
3PR10M1760 FV50
3PR10M0560 FVA50
3PR10M1600 FP50
F50
3PR10M0000
3PR10M0400 FPA50
HV25
117,5 5%
MAX(5;|5*K|)(***)
3PR05Z1760
3PR05Z0560 HVA25
3PR10M1200 FR50
3PR05M1760 FV25
3PR05M0560 FVA25
3,5
Fluoroelastometer
0,15
0,25
(-10)+(+65)
(-20)+(+100)
IP65
carbide
M2,5
3PR05M1600 FP25
3,5
Fluoroelastometer
0,15
0,25
(-10)+(+65)
(-20)+(+100)
IP65
carbide
M2,5
HP25
R
PV
3,5
Fluoroelastometer
0,15
0,25
(-10)+(+65)
(-20)+(+100)
IP65
carbide
M2,5
80,5 5%
MAX(2,5;|5*K|)(***)
0,6
0,9
3PR05Z1600
HR25
3PR05Z1200
0,6
0,9
3PR05Z0400 HPA25
H25
10
11
8
117,5 5%
MAX(2,5;|5*K|)(***)
3PR05Z0000
0,6
0,9
3PR05M0400 FPA25
3PR05M1200 FR25
F25
3PR05M0000
0,03
0,7 2,3
0,5 1
7,5 14,5
PP
5
6,6
8
0,023
0,70
10 mm
BORE GAUGES LINE
BENCH GAUGES

DISPLAY UNITS
PP
TRANSDUCERS AND
5 mm
3PR10Z0560 HVA50
2,5 mm
Red Crown 2 - 9
TRANSDUCERS AND
Standard Compatible Models
BORE GAUGES LINE
SPRING
Cable
HBT
TESA
MERCER
METEM
MAHR-FEINPRUEF
LVDT
MICROCONTROL
PNEUM. PUSH
Cable
HBT
TESA
MERCER
METEM
MAHR-FEINPRUEF
LVDT
MICROCONTROL
VACUUM
Cable
HBT
TESA
MERCER
METEM
MAHR-FEINPRUEF
LVDT
MICROCONTROL
05 mm
AX
H05
3PR01T0000
3PR01R0000
3PR01S0000
3PR01P0000
F05
3PR01K0000
1 mm
90
HR05
3PR01T1200
3PR01R1200
3PR01S1200
3PR01P1200
FR05
3PR01K1200
05 mm
AX
H10
3PR02T0000
3PR02R0000
3PR02S0000
3PR02P0000
F10
3PR02K0000
90
HR10
3PR02T1200
3PR02R1200
3PR02S1200
3PR02P1200
FR10
3PR02K1200
1 mm
AX
90
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
05 mm
AX
HPA10
3PR02T0400
3PR02R0400
3PR02S0400
3PR02P0400
FPA10
3PR02K0400
90
HP10
3PR02T1600
3PR02R1600
3PR02S1600
3PR02P1600
FP10
3PR02K1600
1 mm
AX
90
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
AX
HVA10
3PR02T0560
3PR02R0560
3PR02S0560
3PR02P0560
FVA10
3PR02K0560
90
HV10
3PR02T1760
3PR02R1760
3PR02S1760
3PR02P1760
FV10
3PR02K1760
2 mm LongRange
AX
H21
3PR10T0199
F21
-
90
HR21
3PR10T1399
FR21
-
2 mm
AX
H20
3PR05T0199
3PR05P0199
F20
-
2 mm LongRange
AX
HPA21
3PR10T0559
FPA21
-
90
HP21
3PR10T1759
FP21
-
2 mm
AX
HPA20
FPA20
-
2 mm LongRange
AX
HVA21
3PR10T0599
FVA21
-
90
HV21
3PR10T1799
FV21
-
90
HR20
3PR05T1399
FR20
-
90
HP20
FP20
2 mm
AX
HVA20
FVA20
-
90
HV20
FV20
-
BENCH GAUGES
Soft Touch Compatible Models

DISPLAY UNITS
SPRING
Cable
HBT
TESA
METEM
LVDT
MICROCONTROL
INTERFACE BOXES
PNEUM. PUSH
Cable
HBT
TESA
METEM
LVDT
MICROCONTROL
VACUUM
Cable
HBT
TESA
METEM
LVDT
MICROCONTROL
05 mm
AX
H05L
3PR01T5000
3PR01S5000
F05L
-
1 mm
90
HR05L
3PR01T6200
3PR01S6200
FR05L
-
05 mm
AX
H10L
3PR02T5000
3PR02S5000
F10L
-
90
HR10L
3PR02T6200
3PR02S6200
FR10L
3PR02K6200
1 mm
AX
90
NA
NA
NA
NA
NA
NA
05 mm
AX
HPA10L
3PR02T5400
3PR02S5400
FPA10L
3PR02K5400
90
HP10L
3PR02T6600
3PR02S6600
FP10L
3PR02K6600
1 mm
AX
90
NA
NA
NA
NA
NA
NA
AX
HVA10L
3PR02T5560
3PR02S5560
FVA10L
3PR02K5560
90
HV10L
3PR02T6760
3PR02S6760
FV10L
3PR02K6760
SOFTWARES
Red Crown 2 - 10
2 mm LongRange
AX
H21L
3PR10T5199
F21L
-
90
HR21L
3PR10T6399
FR21L
-
2 mm
AX
H20L
3PR05T5199
F20L
-
2 mm LongRange
AX
HPA21L
3PR10T5559
FPA21L
-
90
HP21L
3PR10T6759
FP21L
-
2 mm
AX
HPA20L
FPA20L
-
2 mm LongRange
AX
HVA21L
3PR10T5599
FVA21L
-
90
HV21L
3PR10T6799
FV21L
-
90
HR20L
FR20L
-
90
HP20L
FP20L
-
2 mm
AX
HVA20L
FVA20L
-
90
HV20L
FV20L
-
90
HP25
3PR05T1600
3PR05R1600
3PR05S1600
3PR05P1600
FP25
3PR05K1600
2,5 mm
90
HV25
3PR05T1760
3PR05R1760
3PR05S1760
3PR05P1760
FV25
3PR05K1760
5 mm
AX
HPA50
3PR10T0400
3PR10R0400
3PR10S0400
3PR10P0400
FPA50
3PR10K0400
90
HR100
3PR20T1200
3PR20R1200
3PR20S1200
3PR20P1200
FR100
3PR20K1200
10 mm
90
HP50
3PR10T1600
3PR10R1600
3PR10S1600
3PR10P1600
FP50
3PR10K1600
5 mm
AX
HVA50
3PR10T0560
3PR10R0560
3PR10S0560
3PR10P0560
FVA50
3PR10K0560
AX
H100
3PR20T0000
3PR20R0000
3PR20S0000
3PR20P0000
F100
3PR20K0000
AX
HPA100
3PR20T0400
3PR20R0400
3PR20S0400
3PR20P0400
FPA100
3PR20K0400
90
HP100
3PR20T1600
3PR20R1600
3PR20S1600
3PR20P1600
FP100
3PR20K1600
10 mm
90
HV50
3PR10T1760
3PR10R1760
3PR10S1760
3PR10P1760
FV50
3PR10K1760
AX
HVA100
3PR20T0560
3PR20R0560
3PR20S0560
3PR20P0560
FVA100
3PR20K0560
90
HV100
3PR20T1760
3PR20R1760
3PR20S1760
3PR20P1760
FV100
3PR20K1760
For dimensions please refer

to drawings on page 4-5.
BENCH GAUGES
AX
HVA25
3PR05T0560
3PR05R0560
3PR05S0560
3PR05P0560
FVA25
3PR05K0560
10 mm
90
HR50
3PR10T1200
3PR10R1200
3PR10S1200
3PR10P1200
FR50
3PR10K1200
BORE GAUGES LINE
2,5 mm
AX
HPA25
3PR05T0400
3PR05R0400
3PR05S0400
3PR05P0400
FPA25
3PR05K0400
5 mm
AX
H50
3PR10T0000
3PR10R0000
3PR10S0000
3PR10P0000
F50
3PR10K0000
90
HR25
3PR05T1200
3PR05R1200
3PR05S1200
3PR05P1200
FR25
3PR05K1200
TRANSDUCERS AND
2,5 mm
AX
H25
3PR05T0000
3PR05R0000
3PR05S0000
3PR05P0000
F25
3PR05K0000
90
HP25L
3PR05T6600
3PR05S6600
FP25L
3PR05K6600
2,5 mm
AX
HVA25L
3PR05T5560
3PR05S5560
FVA25L
3PR05K5560
90
HV25L
3PR05T6760
3PR05S6760
FV25L
3PR05K6760
10 mm
90
HR50L
3PR10T6200
3PR10S6200
FR50L
3PR10K6200
5 mm
AX
HPA50L
3PR10T5400
3PR10S5400
FPA50L
3PR10K5400
90
HR100L
3PR20T6200
3PR20S6200
FR100L
3PR20K6200
10 mm
90
HP50L
3PR10T6600
3PR10S6600
FP50L
3PR10K6600
5 mm
AX
HVA50L
3PR10T5560
3PR10S5560
FVA50L
3PR10K5560
AX
H100L
3PR20T5000
3PR20S5000
F100L
3PR20K5000

DISPLAY UNITS
2,5 mm
AX
HPA25L
3PR05T5400
3PR05S5400
FPA25L
3PR05K5400
5 mm
AX
H50L
3PR10T5000
3PR10S5000
F50L
3PR10K5000
AX
HPA100L
3PR20T5400
3PR20S5400
FPA100L
3PR20K5400
90
HP100L
3PR20T6600
3PR20S6600
FP100L
3PR20K6600
10 mm
90
HV50L
3PR10T6760
3PR10S6760
FV50L
3PR10K6760
AX
HVA100L
3PR20T5560
3PR20S5560
FVA100L
3PR20K5560
90
HV100L
3PR20T6760
3PR20S6760
FV100L
3PR20K6760
For dimensions please refer

to drawings on page 6-7.
INTERFACE BOXES
90
HR25L
3PR05T6200
3PR05S6200
FR25L
3PR05K6200
SOFTWARES
2,5 mm
AX
H25L
3PR05T5000
3PR05S5000
F25L
3PR05K5000
Red Crown 2 - 11
TRANSDUCERS AND
Springs
SPRING
FORCE
BORE GAUGES LINE
0,4
2
2,5
1
2
2,5
1
1,6
2
2,5
1
1,6
2
05
(N)
(N)
(N)
(N)
(N)
(N)
(N)
(N)
(N)
(N)
(N)
(N)
(N)
X
X
X
Measuring Range
2LR
2,5
X
X
X
X
X
X
X
X
X
X
10
Order code
1024099751
1024099753
1024099754
1042414237
1042414236
1042414235
1042414435
1042414441
1042414436
1042414437
1042414537
1042414561
1042414536
Accessories
CONTACTS
10,7
4,5
2,2
Description
Order code
Contact 5 mm / M2,5
3392409910
Flat contact M2,5
3392409912
Cut contact M2,5
3392409914
Description
Order code
Cable extension 1 m
6735932026
Cable extension 2 m
6735932015
Cable extension 5 m
6735932016
Cable extension 10 m
6735932017
Cable extension 15 m
6735932037
Description
Order code
Bushing outside 10 mm
1019826001
Bushing outside 3/8
1019826002
Dowel M3x10
1024099760
Dowel 4-40 UNC x .375
1024099761
Tongs bushing 8
2042414100
Description
Order code
Vacuum pump + L = 1 m tubing
4717008002
Pre-travel regulator wrench
1346413200
4,5
9
1,5
BENCH GAUGES
4,5
R=0,5
2,5
CABLE EXTENSIONS
11,5
23
17
14
INTERFACE BOXES
clamping
M12x1

DISPLAY UNITS
LVDT / HBT
SOFTWARES
32
other accessories
78
Red Crown 2 - 12
Order code
Description
3
7,5
TRANSDUCERS AND
AIR ADAPTORs
Axial air adaptor
4430RSMV03
Radial air adaptor
4430RSMVAB
7,5
(***)
4 x 0,75 L= 3 m
4 x 0,75 L= 3 m
(***)
4 x 0,75 L= 3 m
4 x 0,75 L= 3 m
(***)
4 x 0,75 L= 3 m
4 x 0,75 L= 3 m
(***)
4 x 0,75 L= 3 m
4 x 0,75 L= 3 m
(***)
4 x 0,75 L= 3 m
4 x 0,75 L= 3 m
(***)
4 x 0,75 L= 3 m
4 x 0,75 L= 3 m
(***)
4 x 0,75 L= 3 m
4 x 0,75 L= 3 m
4 x 0,75 L= 3 m
4 x 0,75 L= 3 m
1/8 R
Electric
control
Manual
control
M5 P
1/8
A
7
Pneumatic
control
1/4
1/4
4
(*)
5
(*)
1
1/4
Measuring pressure
adjustment (0.4 - 1 bar)
(**) Overpressure discharge
calibration according to
the measuring pressure
(***) If necessary co-ordinate
the measuring speed of
the probes, use of flow
regulators is recommended.
3 bar min
of dry air with
dew point 25C
Description
ON-OFF valve 1/4
Filter 5 with semi automatic discharge
Pressure regulator
Pressure gauge 50 1/8 scale 04 bar
Rapid terminal with bracket 72
Overpressure discharge valve
Beam 1/4
Silencer 1/2
Monostable lever 3-way 2-position valve
Silencer 1/8
Distributor for max 16 probes
1
1/4
Ref
1
2
3
4
5
6
7
8
9
Application specs for pneumatic push probes:

- Standard version with gaiter: 0,41 bar
- Version without gaiter: 0,52 bar
Fine adjustment of vacuum

pump air
supply (4 6 bar)
A vacuometer can be
installed to check the real
vacuum actuation and the
vacuum value applied to
probes (-0,55 / -0,70 bar)
(***) If it is necessary to
coordinate the measuring
speed of the probes, it
is suggested to use flow
regulators

(**)
4 bar min
of dry air with
dew point 25C
Q.ty
1
1
1
1
2
1
1
1
1
1
1
(*)
Q.ty
1
1
1
1
2
1
1
1
1
Description
ON-OFF valve 1/4
Filter 5 with semi automatic discharge
Pressure regulator
Pressure gauge 50 1/8 scale 04 bar
Rapid terminal with bracket 72
Silencer 1/2
Monostable lever 3-way 2-position valve
Vacuum pump
Distributor for max 16 probes
Application specs for probes with spring push

and vacuum retraction:
- Standard version with gaiter: -0,55 -0,7 bar
- Version without gaiter: 0,52 bar
Red Crown 2 - 13

DISPLAY UNITS
INTERFACE BOXES
(*)
SOFTWARES
Ref
1
2
3
4
5
6
7
8
9
10
11

(***)

(***)

(***)

(***)

(***)

(***)

(***)

(***)
4 x 0,75 L= 3 m
4 x 0,75 L= 3 m
4 x 0,75 L= 3 m
4 x 0,75 L= 3 m
4 x 0,75 L= 3 m
10
4 x 0,75 L= 3 m
(**)
11
6x1 L=1 m
4 x 0,75 L= 3 m
(***)
(***)
(***)
(***)
(***)
(***)
(***)
(***)
4 x 0,75 L= 3 m
4 x 0,75 L= 3 m
4 x 0,75 L= 3 m
4 x 0,75 L= 3 m
4 x 0,75 L= 3 m
4 x 0,75 L= 3 m
4 x 0,75 L= 3 m
6x1 L=1 m
A
4 x 0,75 L= 3 m
Pneumatic
control
Manual
control
PNEUMATIC LAYOUT FOR VACUUM CONTACT RETRACTION

(***)

(***)

(***)

(***)

(***)

(***)

(***)

(***)
Electric
control
4 x 0,75 L= 3 m
(***)
PNEUMATIC SYSTEM FOR MEASURING PROBES
For applications with pneumatic push and vacuum retraction probe type, the pneumatic system should be
sized as shown in the below schemes.
Air supply: air must be dry and unoiled, with dew point in the range 2-5 C and filtered to 5 m.
BENCH GAUGES
Pneumatic System
BORE GAUGES LINE
TRANSDUCERS AND
Cross reference Table: Sensors - Interface Units - Display Units
A124
D124
Quick
Block
Digi
Block
Hand
Red
Red
Digi
HelD
Crown 2
Crown 2 Crown 2
GAUGES
USB
DEVICE NAME
#CH
Acquisition
TIME
1-2
2 ms
14
2 ms
1
4
8
2 ms
16
0,25 ms
1 ms
1744
0,25 ms
131
0,25 ms
18
0,25 ms
1744
0,25 ms
1 ms
QUICK READ
BORE GAUGES LINE
E4N
(*)
(*)
(*)
TCI1 - TCI4 - TCI8
GAGE
POD
EASY BOX
(*)
BENCH GAUGES
DISPLAY UNITS
DIGI NET
(**)
(*)
INTERFACE BOXES
RED CROWN 2 USB
* Digi Crown2 probes, can also be connected to all Marposs standard LVDT interfaces.
** Red Crown2 LVDT can be connected to Digi Crown Net by dedicated programming.
SOFTWARES
Red Crown 2 - 14
DISPLAY UNIT
VISUALIZATION ON
SERIAL 232
EMBEDDED
QUICK READ
LED BARGRAPH
+
DIGITAL DISPLAY
SERIAL 232 /
digimatic / bcd
EMBEDDED
E4N
LED BARGRAPH
+
DIGITAL DISPLAY
ANALOGUE
(VOLTAGE /
CURRENT)
USB ETHERNET
WIFI
Marposs
Acq. SW (1)
E9066 INDUSTRIAL PC / COMMERCIAL PC
LCD DISPLAY
USB
Marposs
Acq. SW (1)
LCD DISPLAY
USB
EMBEDDED
MERLIN
LCD DISPLAY
USB
EMBEDDED
NEMO
LCD DISPLAY
USB/232/PCI
CARD/ISA CARD
Marposs
Acq. SW (2)
LCD DISPLAY
USB/232
EMBEDDED
MERLIN
8,4 LCD DISPLAY
DIRECT
EMBEDDED
NEMO
5,7 LCD DISPLAY
USB/232
MADE BY
PROTOCOL
COMMAND
PLC
PLC
USB
Marposs
Acq. SW (1)
NEMO/MERLIN/E9066/INDUSTRIAL PC/COMMERCIAL PC/PLC/ANY HOST USB
DEPENDING ON THE
DISPLAY UNIT
BORE GAUGES LINE
ACQUISITION SW
TRANSDUCERS AND
OUTPUT TYPE
INTERFACE BOXES

DISPLAY UNITS
BENCH GAUGES
PLC/CNC
SOFTWARES
(1) Please refer to the Easy Box section in Testar catalogue

(2) Please refer to the Digi Net section in Testar catalogue
Red Crown 2 - 15
TRANSDUCERS AND
Application Examples
AUTOMOTIVE COMPONENTS
GEARS
BEARING INDUSTRY
CONTAINERS & PACKAGING
GLASS CONTAINERS
automotive GLASS
AEROSPACE
CONSUMER ELECTRONICS
BORE GAUGES LINE
automotive
BENCH GAUGES
DISPLAY UNITS
Edizione 09/2014 - Specifiche soggette a modifiche - Copyright 2014 Marposs S.p.A (Italy) - Tutti i diritti riservati

INTERFACE BOXES
SOFTWARES
Red Crown 2 - 16
Designed to be used in the workshop as well as in the laboratory,

can solve various measur-ing
problems at a very competi-tive
price/performance ratio.
Available with fixed or interchangeable contact.
IP 65 protection degree against
dust and fluids.
BORE GAUGES LINE

8 models of full-bridge (LVDT)

and half-bridge (HBT) probes with
clamping diameter 8 mm or 3/8
and measuring range 1 mm
(.04), to be used especially with
mechanical transmission devices
such as TESTAR AMA, Quick
Block and Quick Set.
TRANSDUCERS AND
PENCIL PROBES
59,8 mm
(2.35)
(*) 84,3 mm
(3.32)
(*) 73,3 mm
(2.89)
(*) Dimensions referred to the electrical zero
Quick Probe - 1
59,8 mm
(2.35)
INTERFACE BOXES
Quick Probe with interchangeable contact
SOFTWARES
Quick Probe with fixed contact

DISPLAY UNITS
BENCH GAUGES
Compatible with any electronics

already present on the market.
Mechanical specifications
MODEL
SF100
LVDT
SH100
HBT
WITH FIXED CONTACT
BORE GAUGES LINE
M EASURING RANGE
M AX . OVERTRAVEL
P RETRAVEL
L INEARITY ERROR
R EPEATABILITY
T HERMAL DRIFT
T EMPERATURE RANGE
MEASURING FORCE
G UIDE
CABLE LENGTH
S TANDARD CONNECTOR
P ROTECTION LEVEL
OPTIONAL CONTACTS
Not applicable
SF101
LVDT
SH101
HBT
WITH INTERCHANGEABLE CONTACT
1 mm (.04)
1.5 - 2.5 mm (.06 - .10)
1.2 - 1.5 mm (.05 - .06)
5 m (0.25%)
0.1 m
0.25 m/C
-10C/ +65C
0.8 N 25%
Bushing
2m
Lumberg SV 50/6 (DIN 45322)
IP65
Available (see Red Crown section)
Full-bridge (LVDT) electrical specifications

Trade name
Calibration frequency (KHz)
Calibrated at
Max. current (mA RMS)
I/O phase shift
Sensitivity (mV/V/mm)
Cable outlet
Order Code
SF100
axial
SF101
7,5
3,5V RMS with load 1 MOhm//360pF
12
10
230 1%
3/8
8 mm
3424011050
3424011500
8 mm
3424011000
3/8
3424011550
BENCH GAUGES
Half-bridge (HBT) electrical specifications

DISPLAY UNITS
Trade name
Calibrated at
I/O phase shift
Cable outlet
Order Code
SH100
axial
SH101
7,5
3,5V RMS with load 2 KOhm 0,1%
10
10
73,75 1%
3/8
8 mm
3424014050
3424014500
8 mm
3424014000
3/8
3424014550
Half-bridge (HBT) electrical specifications of the version compatible with amplifiers of TESA
Trade name
Calibrated at
I/O phase shift
Cable outlet
Order Code
SH100
SH101
13
3V RMS with load 2 KOhm 0,1%
7
3
73,75 1%
8 mm
axial
3424014600
INTERFACE BOXES
DESCRIPTION
QUICK PROBE SF/SH USER MANUAL
3424014700
ORDER CODE
D4340012X1 (*)
(*) X = I (Italian); G (English); D (German); E (Spanish); F (French)
SOFTWARES
QUICK PROBE - 2
Edition 04/2007 - Specifications are subject to modifications - Copyright 2001 - 2007 Marposs S.p.A. (Italy) - All rights reserved
TRANSDUCERS AND
TECHNICAL SPECIFICATIONS / ORDER CODES
Offered by a world-wide market

leader, the AMA is a new and
economical way of designing
high quality solutions using
Off The Shelf modular gauging
components.
BORE GAUGES LINE

BENCH GAUGES
15 different designs
8 mm and 3/8 clamping diameter
high precision and reliability
compact design (12 mm thickness)
variety of mounting options
wide range of contact offsets
INTERFACE BOXES
AMA is a line of mechanical measuring devices developed to satisfy

the requirements of the gauging
market. Based on their versatility,
fixture makers, gauge makers and
engineering sources will produce
the right solution for their applications, such as: inside and outside
diameters, TIR, distances, pneumatic retraction and self-centering
measuring units.
The main feature of the product line
is universal applicability and this is
achieved by:
SOFTWARES
ADVANCED MEASURING
ARMSET
They can be used with any pencil

probe transducers, as well as
mechanical and digital indicators.
Pneumatic actuation, available
on some models, allows contact
retraction to eliminate interference
with the workpiece during manual
and automatic part loading and
unloading.
A CD ROM disk, containing the .dxf
drawing files of the AMA components, makes designing high quality
applications an easy task, even for
the beginner.

DISPLAY UNITS
AMA will protect and extend

the working life of gauging solutions.
TRANSDUCERS AND
This product, manufactured of

non-magnetic stainless steel, was
devel-oped as a result of TESTARs
long standing experience in the
gauging field.
AMA - 1
TRANSDUCERS AND
TB - TRANSMISSION BASIC DEVICE
43
8
23
7,5
12
WR
MODEL
ORDER CODE
8 mm
2927364005
3/8
2927364035
-0
12
4xM4
11
Working Range (WR) 1.0 mm
60
43 -0,2
20
8
32
30
TB10
6,2
11
12
-0
34
12
7,5
WR
BENCH GAUGES
MODEL
ORDER CODE
8 mm
2927364006
3/8
2927364036
4 x M4
11
60
-0
32
TB10C
43 -0,2
20
4 x M 2,5
12
14
11,9 -0,1
30
BORE GAUGES LINE
4 x M 2,5
6,2
11
12
-0
11,9 -0,1
34
12
43
WR
7,5
23
8 mm
2927364003
3/8
2927364033
89,2
40
62,5 - 0,2
57
66
-0
-0,2
20
4 x M4
ORDER CODE
2 x 3,05
7,5 8
5,3
MODEL
11
+0,05
26
8
50
TB16
-0
11,9 -0,1
13,5
34
7,5
14
4 x M 2,5
SOFTWARES
ORDER CODE
8 mm
2927364004
3/8
2927364034
7,5 8
2 x 3,05
13,5
34
For 3/8" models: M2.5 ---> 4-48 UNF

AMA - 2
-0
11,9 -0,1
89,2
40
+0,05
- 0,2
4 x M4
5,3
MODEL
11
62,5
20
TB16C
66
-0
57 -0,2
26
INTERFACE BOXES
12
WR
50

DISPLAY UNITS
4 x M 2,5
H (*)
(mm)
L
(mm)
P
(mm)
TB10
TB10C
TB16
TB16C
30
30
50
50
14
14
14
14
20
20
20
20
H (*)
L
L
ACCESSORIES
APPLICATION EXAMPLES
P
BORE GAUGES LINE
With a vertical off-set the Arm Ratio changes:

mod. TB10 [30 / (30 + h)] mod. TB16 [50 / (50 + h)] with h = 0 H
M 2,5
4-48 UNF
M 2,5
OFF-SET L
(mm)
ORDER CODE
8,5
10
8,5
10
2924017150
2924017151
2924017152
2924017153
BENCH GAUGES
TB10
TB10C
TB16
TB16C
12,5
16,5
L
4,75
MODEL
2,5
7,5
2,25
OFF-SET ARMSET (ARM RATIO 1:1)
TO INVERT
MEASURING
DIRECTION
WITH
SPRING
DEVICE
ORDER CODE
MODEL
TB10
TB10C
TB16
TB16C
WITH
SPRING
DEVICE
8 mm
3/8
8 mm
3/8
3192736405
3192736435
3192736403
3192736433
INTERFACE BOXES
TO INVERT
MEASURING
DIRECTION

DISPLAY UNITS
STRAIGHT ARMSET (ARM RATIO 1:1)
SPRING DEVICE
MODEL
ORDER CODE
TB10 - TB16
2027364001
TB10C - TB16C
2027364002
ALTERNATIVE CLAMPING DEVICE

(alternative to standard clamping)
ORDER CODE
SOFTWARES
(*)
MODEL
TRANSDUCERS AND
CONTACT OFF-SET APPLICATION LIMITS
2027364000
AMA - 3
TS12 - TS21
M2
TS12
3/8
2927364130
8 mm
2927364101
3/8
2927364131
M2
22
B = 1,5
TS21
M2
20
22
20
TS21
ORDER CODE
2927364100
10
BORE GAUGES LINE
TS12
8 mm
MODEL
10
20
20
TRANSDUCERS AND
TS - TRANSMISSION SHOULDER DEVICE
M2
B = 5,516
110,2
16
WR
12
16
M3
99
Measuring contact position zone
TECHNICAL DATA
(mm)
1,2
(2.77 ) (max err. %)
1
<0,5m
1,5 1,75
0,0238B+1,37
Note: with Red Crown probes featuring 0,5 mm range the contact
extension must be mounted (with M 2,5 thread code 1024017105 or
1024017106; with 4-48 UNF thread code 1024017115 or 1024017116).
ACCESSORIES
CONTACT
FOR
CONTACT
TS12 (AR 1:1)
FOR
TS12 (AR 1:1)
ARMSET FOR GROOVES FOR TS21 (AR 1:1.75)
3,7
R20
R5
6,5
16
15
10
2
ORDER CODE
10
5,7
3292736401
ORDER CODE
3292736405
3292736410
R
5
20
ORDER CODE
15
3292736415
1,9
INTERFACE BOXES
R10
14,5
8,7
R0.2
6,5

DISPLAY UNITS
1,8 2,1
0,02857B+1,643
TS21
TS12
REPEAT. SENSIT.
10
WORKPIECE LOADING DIRECTION

INTERFACE BLOCK
FOR QUICK SET
SUPPORT BRACKET
SIDE COVER
3,2
11
23
SOFTWARES
16
20
16
ORDER CODE
ORDER CODE
2927364145
2927364150
70
BENCH GAUGES
ARM RATIO
(AR)
MOD. WORKING RANGE

(WR)
76
35
AMA - 4
TP12E
WORKING RANGE (WR) 1.2 mm
61
8,5
15
3,75
2 x M3
WR
TRANSDUCERS AND
TP - TRANSMISSION PARALLELOGRAM DEVICE
3,75
68,5 0,1
15
36
2924051202
71
3/8
ORDER CODE
2924051200
40
MODEL
8 mm
32,5
TP12E (EXTERNAL CHECKS)
BORE GAUGES LINE
3 x M2,5
ORDER CODE
8 mm
2924051201
3/8
2924051203
2 x 4,2
21
2 x M4
12 h11
2 x 3,1
20 0,02
17
M6
11,75
TP12EP
61
8,5
TP12EP
15
3,75
2 x M3
WR
MODEL
8,9
TP12I (INTERNAL CHECKS)
3,75
3 x M2,5
15
3024051206
68,5 0,1
3/8
71
ORDER CODE
3024051204
40
MODEL
8 mm
32,5
WITH PNEUMATIC RETRACTION)
BENCH GAUGES
(EXTERNAL CHECKS
ORDER CODE
8 mm
3024051205
3/8
3024051207
2 x 4,2
21
2 x M4
12 h11
2 x 3,1
17
20 0,02
M6
11,75
TP60E
92
WR
34
6
3,75
2 x M3
3,75
3 x M2,5
113,8
116,3
TP60E
86
0,1
55,3
37
(EXTERNAL CHECKS
MODEL
ORDER CODE
8 mm
2924051400
3/8
2924051430
58,5
M6
23
10
2 x M4
20 0,02
2 x 3,1
12 h11
46
For 3/8" models: M2,5 ---> 4-48 UNF

AMA - 5
INTERFACE BOXES
MODEL
SOFTWARES
8,9
(INTERNAL CHECKS

DISPLAY UNITS
36
15
TP12IP
WR
34
6
3,75
2 x M3
3,75
3 x M2,5
(INTERNAL CHECKS WITH PNEUMATIC
116,3
TP60I
113,8 0,1
55,3
37
86
BORE GAUGES LINE
RETRACTION)
MODEL
ORDER CODE
8 mm
2924051401
3/8
2924051431
58,5
TRANSDUCERS AND
TP60I
92
M6
23
10
20 0,02
2 x M4
2 x 3,1
46
For 3/8" models: M2,5 ---> 4-48 UNF


TP12SE
(ELEMENT FOR SELF-CENTERING
GROUP FOR EXTERNAL CHECKS)
BENCH GAUGES
MODEL
ORDER CODE
8 mm
2924051208
3/8
2924051209
TP12SI
(ELEMENT FOR SELF-CENTERING GROUP
FOR INTERNAL CHECKS)

DISPLAY UNITS
MODELLO
ORDER CODE
8 mm
2924051228
3/8
2924051229
SELF-CENTERING GROUP FOR EXTERNAL

20 mm OBTAINED WITH:
TP12SE (Q.ty 2)
Slide (Q.ty 2)
Self-centering kit (Q.ty 1)
30 mm extention (Q.ty 1)

TP60SE
FOR EXTERNAL CHECKS WITH PNEUMATIC
INTERFACE BOXES
RETRACTION)
MODELLO
ORDER CODE
8 mm
2924051409
3/8
2924051407
TP60SI
FOR INTERNAL CHECKS WITH PNEUMATIC
RETRACTION)
SOFTWARES
MODELLO
ORDER CODE
8 mm
2924051406
3/8
2924051408
SELF-CENTERING GROUP FOR EXTERNAL

75 mm OBTAINED WITH:
AMA - 6
TP60SE (Q.ty 2)
Slide (Q.ty 2)
Self-centering kit (Q.ty 1)
70 mm extention (Q.ty 1)
12 h11
TRANSDUCERS AND
SELF-CENTERING KIT
ORDER CODE
8 mm
2924051210
MODEL
TP12
TP60
3/8
2924051213
8 mm
2924051410
3/8
2924051413
EXTENSIONS (D)
1024017106
20 mm
1024017107
25 mm
1024017108
30 mm
1024017109
70 mm
1019750093
80 mm
1019750122
TP12
(mm)
D (mm)
0-3
10
3-8
15
8-13
20
13-18
25
18-23
30
23-28
35
28-33
40
33-38
45
38-43
50
43-48
55
48-53
60
53-58
65
TP60
(mm)
D (mm)
0-10
-
10-20
10
20-30
20
30-40
30
40-50
40
50-60
50
60-70
60
70-80
70
80-90
80
90-100
90
D should be obtained with the lowest number of extensions
CONTACTS OFF-SET APPLICATION LIMITS/

MEASURING PERFORMANCES
(*)
(mm)
(mm)
(mm)
TP12
40
14
40
<0,2
1,5
TP60
90
14
50
<0,3
1,5
REPEAT.
H (*)
SENSIT.
2,77 (m) (max err. %)
The Arm Ratio is 1:1 for any contact position.

DISPLAY UNITS
MODEL
(*)
ACCESSORIES
DESCRIZIONE
MODEL
H (*) MAX
ORDER CODE
20
2924051211
40
2924051219
20
2924051212
(mm)
RETOOLING RANGE 0 15 mm
M 2,5
2924051405
4-48 UNF
90
2924051435
M 2.5
(B = 30 mm)
4-48 UNF
ARMSET
TP60
M 2.5
(B = 60 mm)
4-48 UNF
M 2,5
4-48 UNF
3192405123
2 mm
OFF-SET ARMSET
ARMSET
11,8
3192405140
3192405143
(A = 8,5 mm)
2924017150
(A = 10 mm)
2924017151
(A = 8,5 mm)
2924017152
(A = 10 mm)
2924017153
OFF-SET
ARMSET
3192405120
INTERFACE BOXES
2924051220
AMA - 7
2,5
M 2,5
12,5
TP12
90
7,5
TP60
40
M 2,5
A
16,5
4-48 UNF
2,25
SLIDE
4,75
TP12
1024017105
15 mm
BENCH GAUGES
10 mm
SOFTWARES
ORDER CODE
BORE GAUGES LINE
TRANSDUCERS AND
DESCRIPTION
MODEL
ORDER CODE
B
E
PRETRAVEL/
OVERTRAVEL
TP12
(any model)
2924051260
LIMITER
Note: It must always be used when TP12 is equipped with Red Crown F05/H05 probes having a measuring range of 0,5 mm.
BORE GAUGES LINE
BENCH GAUGES
DISPLAY UNITS
INTERFACE BOXES
DESCRIPTION
ORDER CODE
Support CD Rom - with .DXF drawings collection
CD-020.02
SOFTWARES
AMA - 8
DOCUMENTATION
BORE GAUGES LINE

Quick Block is a universal measuring element, equipped with high

precision linear guides, for checking
internal and external diameters and
distances.
The product family has been enhanced with the 10 mm range version to meet the most demanding
customers application requirements.
TRANSDUCERS AND
the complete
range of measuring
armsets with
parallel guide
For analog version
The built-in transducer model is also available in digitized version, to be

connected to Marposs DigiCrown network, and in USB version for direct
connection to electronic display units and industrial/commercial pc.
For digitized version
Each version can be equipped with pneumatic actuation to facilitate

part loading/unloading in the measuring station. A wide range of spring,
measuring arms and contacts is also available, allowing to reach any
measuring position keeping the arm ratio unchanged.
INTERFACE BOXES
Connectors
The 5 mm version features a 5 mm diameter double guide and a ball

cage anti-rotation system providing a repeatability range (max-min) lower
than 0,5 m with direct contact. This version can be supplied with axial
or radial cable outlet for transducer and pneumatic cylinder.
Particularly suitable as a Quick Set component for Post-Process applications with robot part loading and unloading. By means of specific
interfaces it can be assembled on two different support brackets to
measure diameters up to 40 mm and 90mm respectively.
A special version with dovetail compatible with TESA supports and contacts is also available.
Quick Block - 1
Quick Block used as Quick Set component
SOFTWARES
Its measurement axis can be oriented in any spatial direction, while the
contacts support has a retooling range of 20 mm.
For USB version

DISPLAY UNITS
The product, IP65 certified, is available in two versions:

With built-in full-bridge (LVDT) or half-bridge (HBT) transducer featuring 1 mm (0.04) and 5 mm (0.2) measuring range, compatible
with any third party electronic amplifiers;
as simple mechanical transmission featuring 3 mm (0.12) and
5 mm (0.2) measuring range, to be used with linear probes having
clamping diameter 8mm or 3/8, such as Red Crown and Quick Digit.
BENCH GAUGES
product features
Protection degree
Cable lenght
Connector
Sensitivity
Accuracy
mV/V/mm
m
Calibration specs.
Code number
*S=spring; PA=pneumatic cylinder with axial inlet; PR=pneumatic cylinder with radial inlet; **A=axial; R=radial; *** K = reading value (mm)
QBH100 - QBF100 Std Marposs QBH100 Std Tesa
QB 600
M4x7
30
15
11,8
70
18
M4x7
30
15
62

DISPLAY UNITS
70
18
61,7
15
62
BENCH GAUGES
3419883800
3419883801
3419883805
3419883806
3419883810
3419883811
3419883815
3419883816
3419883850
3419883851
3419883855
3419883856
3419883860
3419883861
3419883865
3419883866
bar
g (N)
g (N)
C
guides
transducer
m
3419883365
BORE GAUGES LINE
m
N
m/C
3419883360
mm
3419883355
Transducer
Pretravel
Contact support fixing system
Guiding system
Antirotation system
Repeatability
Tip Force
Thermal drift
Actuation*
Cable outlet**
Operating pressure
Total weight
Mobile parts weight
6
10,6
2
10
HBT Std.
HBT Std.
LVDT
LVDT
HBT Std. Marposs
Marposs
TESA
1,1 1,2
5,1 5,2
Square guide
Dovetail
Square guide
Ball cage
Ball cage
Allen screw
Ball cage
<0,5
<0,5
1 (20%) with std. spring
1,7 (20%) with std. spring
<0,25
<0,25
S
PA
S
PA
S
PA
S PA PR S PA PR S PA PR S PA PR
A
A
A
A
A
A
A R A R A R A R A R A R A R A R
36
36
<260 (<2,548)
<260 (<2,548)
100 (0,98)
110 (1,078)
-10/65
-10/+65
IP65
IP40
IP65
IP40
IP65
IP65
IP65
2
2
Lumberg SV50/6
Lumberg SV50/6
230
73,75
115
29,5
MAX(1+|10K|;|15K|)***
MAX(5+|3K|;|8K|)***
3,5V RMS
3,5V RMS
3V RMS
@7,5kHz
@7,5kHz
with load
3,5V RMS @7,5kHz with 3,5V RMS @7,5kHz with
with load
with load 2M0,1%/
load 1M//360pF
load 2K0,1%
1M//360pF 2K0,1%
13KHz
3419883350
mm
mm
3419883305
Total stroke
Measuring range
3419883300
TRANSDUCERS AND
Technical Specifications
n. 4 M6x8
15
106,2
11,8
70
47,4
cylinder
pencil probe
transducer
106,2
61,7
SOFTWARES
58
1,5
X= QBH100
std. TESA
8,54
60
11,8
pencil probe+
cylinder
1,65
INTERFACE BOXES
transducer+
47,4
5 n. 4 M6x8
70
# Dimension valid for Red Crown 2,

different size according to pencil probe
Quick Block - 2
3019883002
3019883001
3019883724
3019883722
3019883721
3019883714
3019883712
3019883711
3419883989
3419883987
3419883983
3419883982
3419883778
3419883977
3419883973
3419883972
3419883986
3419883985
3419883981
3419883980
3419883976
3419883975
3419883971
3419883970
3419883916
3419883915
3419883911
3419883910
3419883906
3419883905
3419883901
3419883900
3V RMS @13kHz with load

2K0,1%
QB1000 QBH1000 Std. Marposs QBH1000 Std. Tesa - QBF1000 - DB1000 - UB1000
QB1000 QBH1000 Std. Marposs QBH1000 Std. Tesa - QBF1000 - DB1000 - UB1000
Axial transducer/cylinder cable outlet
Radial transducer/cylinder cable outlet
30
15 5
70
18
M4x7
58,9
5 15
30
15 5
62
M4x7
62
70
18
40,3
n. 4 M6x8
11,9
70
106,2
47,4
cylinder
47,4
transducer
40,3
86
BORE GAUGES LINE
11,9
transducer+
cylinder
58,9
n. 4 M6x8
70
transducer+
47,4
5 15
TRANSMISSION ONLY
BENCH GAUGES
USB
5,1 5,2
depends on the probe
Square guide
Square guide
Ball cage
Ball cage
Ball cage
Ball cage
Allen screw
<0,5
<0,5
1,7 (20%) with std. spring
1,7 (20%) without pencil probe
<0,25
<0,25
S
PA PR
S
PA PR
S
PA PR
S
PA PR
S
PA PR
S
PA PR S PA PR S PA PR
S
PA
A R A R A R A R A R A R A R A R A R A R A R A R
36
36
<260 (<2,548)
<260 (<2,548)
110 (1,078)
100 (0,98)
95 (0,931)
-10/+65
-10/+65
IP40
IP65
IP40
IP65
IP40
IP65
IP40
IP65
IP65
IP65
IP65
2
Lumberg SV50/6
Lumberg 0332/06
Standard USB
29,5
MAX(5+|3K|;|8K|)***
(1,2+K2)***
(1,2+K2)***

DISPLAY UNITS
DIGITIZED
6
transducer
pencil probe+
pencil probe+
cylinder
cylinder
INTERFACE BOXES
HBT Std. TESA
10,6
10
TRANSDUCERS AND
10,6
10
47,4
pencil probe
pencil probe
86
SOFTWARES
106,2
# Dimension valid for Red Crown 2,

different size according to pencil probe
Quick Block - 3
4
1
44
6
L
Retooling range
020mm
BORE GAUGES LINE
7
L
8 9 10 11
13
13
12
14
REF.
1
2
3
4
5
BENCH GAUGES
7
8
9
10
11
12
13

DISPLAY UNITS
14
Extension
cables
and user
manuals
INTERFACE BOXES
Quick Set
14
DESCRIPTION
Support for off-set cut contact 7, 8, 9, 10, 11 M4 thread [retooling range 0-20 mm (0-,79")]
Support for simple cut contact 4 or spherical contact 5, 6 [retooling range 0-20 mm (0-,79")]
Contacts support with side rotation [retooling range 0-20 mm(0-,79")]
Simple cut contact
Spherical contact L 20mm, Diameter 5 mm
Left off-set cut contact L = 24 mm
Left off-set cut contact L = 12 mm
Off-set cut contact
Right off-set cut contact L = 12 mm
Right off-set cut contact L = 24 mm
Mechanical reference shaft (external dia. 8 mm, L = 120 mm)
Adapting bushing for pencil probes diameter 8 mm
Adapting bushing for pencil probes dia. 3/8"
Spring 0,6 N (Blue)
Spring 1 N (Inox)
Spring 1,7 N (Black)
Spring 2 N (Green)
Spring 2,6 N (Red)
Spring 4 N (Yellow)
Extension cable LVDT/HBT L = 2 m
User manual QBF/QBH100
User manual QB600
User manual QBF/QBH/DB/UB/Q1000
Support bracket L = 200 mm for diameters up to 40 mm, with interface for two Quick Block
Support bracket L = 250 mm for diameters up to 90 mm (without interface for Quick Block)
Mounting interface for one Quick Block for support bracket L = 250 mm
* To be always used with QB600 and QB1000, to fix the pencil probe or the mechanical reference shaft
** X = I (Italian); U (English); D (German); F (French); E (Spanish)
SOFTWARES
Quick Block - 4
*
*
**
**
**
ORDER CODE
2019883060
2019883050
2019883550
3391988325
3391988301
3391988302
3391988303
3391988310
3391988311
3391988312
3391988336
3391988335
3391988330
3391988337
3391988338
1119883071
1019826001
1019883072
1019883035
1019883030
1019883034
1019883031
1019883032
1019883036
6735932015
6735932016
6735932017
D4340013X1
D4340014X1
D4340064XF
3024017100
3024018100
2924018110
Edizione 06/2014- Specifiche soggette a modifiche - Copyright 2014 Marposs S.p.A (Italy) - Tutti i diritti riservati
TRANSDUCERS AND
Accessories
2. Despite these small dimensions

A124 is provided with a replaceable contact, a feature normally
available only in larger measuring devices. Therefore contact
replacement would no longer
require disassembly of the com-
TESTAR A124 the cost effective

way of designing your compact
gauging application.
4.9
1.7
BOHRUNGSMESSDORNE
MESSRACHEN UND
HANDMESSRINGE
distance
betweeen
contact and
fulcrum 18 mm
1.8
4.9
2.2
M3
2.5
Dimensions (mm)
MEHRSTELLENMESSVORRICHTUNGEN
1. The 7 x 7 x 31 mm compact dimensions allow solving measuring tasks for limited space applications in place of pencil probes
and transmission devices.
ELEKTRONISCHE ANZEIGEGERTE
UND MESSUHREN
The A124 miniature measuring cell

has been developed to satisfy the
increasing demand for a compact
and easy to use measuring component. Thanks to its small dimensions
A124 can be applied in simple as
well as multidimensional measuring
applications. Compact dimensions,
ease of use and universal applicability make Testar A124 the first
choice for gauging designers.
APPLICATION ADVANTAGES
2.5
7
31
2.6
A124 - 1
SPC SOFTWARE
miniature
measuring cell
4. The universal applicability is

determined by the possibility of
using the A124 in virtually any
measuring task still maintaining
great accuracy and reliability.
In addition the A124 electrical
char-acteristics allow connection to Testar or Marposs
measur-ing amplifiers as well
as electron-ics made by Tesa.
Therefore A124 does not require
any special proprietary interface
box or amplifier card thus reducing the cost of the application.
Based on the experience gained
on Red Crown pencil probes
compatible line, Testar has a
development program to extend
A124 electrical compatibility to
other electronics.
INTERFACEBOXEN,
DATENAUFNAHMESYSTEME
3. The simple design and the reduced number of components make

A124 a product that is:
- easy to install
- reliable and robust
- maintenance free (IP67)
- shop floor proof
MESSWERTAUFNEHMER UND
BERTRAGUNGSELEMENTE
plete measuring cell resulting

in time and cost savings. This
design allows also use of different types of contacts depending
on the application requirement
without the need for a special cell
configuration.
Mechanical specifications
200 m
270 30 m
290 40 m
0,9 0,2 N
0,1 m
IP67
M3
3 m
0,3 m/C
+5 / +40 C
Lumberg SV50/6
3m
max 13
Below electrical specifications refer to A124 with contact and

arm ratio 1:1
A124 with armset

and contact
ARM RATIO 1:1
SCALE 1:1
Full-bridge (LVDT) electrical specifications

LVDT compatible with
TESTAR / MARPOSS
amplifiers
7,5 KHz
3,5 V RMS with load 1 MOhm/360 pF
5 mA / V
8
230 mV/V/mm 1%
3419886153
TYPE OF TRANSDUCER
BENCH GAUGES
HBT compatible with

TESTAR / MARPOSS
amplifiers
7,5 KHz
3,5 V RMS with load 2 KOhm 0,1%
4 mA / V
10
73,75 mV/V/mm 1%
3419886154
TYPE OF TRANSDUCER
CALIBRATION FREQUENCY
CALIBRATED AT
MAX. CURRENT
I/O PHASE SHIFT
SENSITIVITY
ORDER CODE
A124 with contact

ARM RATIO 1:1
SCALE 1:1

of the version compatible with amplifiers of TESA
HBT compatible with
amplifiers
of TESA
13 KHz
3 V RMS with load 2 KOhm 0,1%
2,5 mA / V
8
73,75 mV/V/mm 1%
3419886155
TYPE OF TRANSDUCER

DISPLAY UNITS
CALIBRATED AT
MAX. CURRENT
I/O PHASE SHIFT
SENSITIVITY
ORDER CODE
Application example
ACCESSORIES
DESCRIPTION
ACCESSORIES
INTERFACE BOXES
8 (.31")
12,9 (.5")
1408612020
1408612035
3321120230
3360120230
3323120230
3362120230
Contact wrench (2,5 mm)
1300538000
Contact wrench (4 mm)
1300540000
Wrench for diameter set-up
1320893000
Standard armset L= 8 mm
3191988600
M3 Helicoil
5
(.19")
SOFTWARES
3,2 (.12")
2,4 (.09")
ORDER CODE
Carbide contact R=1,5 mm; L=12 mm

Diamond contact R=1,5 mm; L=12 mm
Carbide contact R=3,5 mm; L=12 mm
Diamond contact R=3,5 mm; L=12 mm
Carbide contact R=10 mm; L=12 mm
Diamond contact R=10 mm; L=12 mm
3 (.11")
A124 - 2
CALIBRATED AT
MAX. CURRENT
I/O PHASE SHIFT
SENSITIVITY
ORDER CODE
max 8
BORE GAUGES LINE
MEASURING RANGE
PRE-TRAVEL AT ELECTRICAL ZERO
OVERTRAVEL FROM ELECTRICAL ZERO
TIP FORCE AT ELECTRICAL ZERO
REPEATABILITY ( x 2,77)
DEGREE OF PROTECTION CEI/IEC 529
STANDARD CONTACT (R = 1,5 mm)
LINEARITY ERROR
THERMAL DRIFT AT ZERO
OPERATING TEMPERATURE
STANDARD CONNECTOR
CABLE LENGTH
max 11
TRANSDUCERS AND
TECHNICAL SPECIFICATIONS AND APPLICATION MODES
TRANSDUCERS AND
Mechanical Bore Gauge
DESCRIPTION
Standard measuring range
for type B and T (mm)
Extended measuring range
for type B and T (mm) (*)
Standard measuring range
for type SB and BC (mm)
Repeatability (2,77 )(m)
3 - 4,5
4,5 - 5,5
0,055
0,070
3 - 4,5
4,5 - 5,5
3 - 4,5
4,5 - 5,5
0,055
0,070
WORKING RANGE
5,5 - 26
0,120
5,5 - 7,5
-
7,5 - 15
0,120 - 0,170
26 - 300

BENCH GAUGES
0,150
15 - 26
0,120 - 0,200
5,5 - 26
26 - 38
0,150 - 0,200
26 - 60
0,120
0,150
38 - 100
100 - 150
0,150 - 0,400
0,150 - 0,350
60 - 150
0,120
150 - 300
0,150 - 0,300
150 - 300
0,080
(1) By unscrewing the contacts fastened to the measuring armset by means of a screw with Heli-Coil, the measuring ranges can be extended up
to the values indicated in the table.
M1 STAR MBG - 1
SOFTWARES
The M1 Star MBG (Mechanical

Bore Gauge) is the ideal manual
instrument for precision measuring of inside diameter, ovality and
cylindricity.
It can be totally retooled or repaired
by simply replacing the nosepiece
and contacts.
A mechanical positioning system
automatically ensures alignment
between the nosepiece and the

DISPLAY UNITS
contacts.
The Mechanical Bore Gauge is accurate, robust, reliable and easy to
use.
Maintenance free construction requires only periodic cleaning of the
precision mechanism.
A wide range of modular components makes it possible to configure
the bore gauge to meet all your
measuring needs.
MECHANICAL BORE GAGE
INTERFACE BOXES
Measurable diameters: 3 to 300

mm (0.12-11.81). Special versions available for bigger diameters.
With an extensive range of accessories, it is possible to measure at depths of more than 500
mm and measure bores that are
perpendicular to the axis of insertion.
The durable measuring transmission system is capable of more
than 10.000.000 measuring cycles.
Metrological performances guaranteed for all measurable diameters.
The mechanical transmission
measuring system can be interfaced with any pencil probe, dial
or digital indicator.
The linear designed mechanical
transmission system has an extensive range of accuracy and
only one master is needed for
zero setting.
Compatible with the bore gauge
accessories of the main competitors.
Competitive price.
Fast delivery times.
BORE GAUGES LINE
Main Features
TRANSDUCERS AND
M1 Star - MBG
Mechanical Bore Gauge
The advantage of the M1 Star MBG is the durable

mechanical measurement-transmission principle which
ensures excellent metrological performances. Retoolability and interchangeability with an extensive range of accessories, make the MBG universally applicable.
BORE GAUGES LINE
1 PLUG HEAD: formed by the nosepiece, the measuring

armset and the contacts, it is the measuring element
of the bore gauge. It can be interchanged by simply
unscrewing it from the handle. The MBG plug head
is available in four versions differing from each other
in C distance between the contact axis and the top
of the nosepiece.
See pages 4-7.
1a
1b
1c
1d
1
1a CAP: stainless steel disk protecting the internal

mechanical elements from accidental damages.
1b NOSEPIECE: made of tempered stainless steel,

it is the guiding element that ensures the measurement results are not affected by the operators
manual skill.
BENCH GAUGES
1c MEASURING CONTACTS: standard contacts

are made of tungsten carbide and, in relation to
the diameter range, come in two different radii that
must be chosen on the basis of the bore surface
roughness:
R1: standard radius for Ra 2 m / Rz < 6,3.
R2: bigger radius for Ra 2 m / Rz > 6,3.
Diamond or DLC-coated contacts are also available.
Diamond contacts are suggested for soft aluminum
or highly wearing applications; DLC-coated ones
(3000 HV) for aluminum and relevant alloys.

DISPLAY UNITS
1d MEASURING ARMSET: it is made by either 2 or

4 fulcrum elements, depending on the diameter
range. The measurement is transferred to the display
device by a transfer rod with spherical head that
slides on a cradle formed by a V-shaped guide and
an inclinated plane.
2 HANDLE: used to hold the plug gauge it has been
specifically designed for best handling. It can be
a pencil probe holder (in electro-mechanical applications
2-A) or an i-Wave handle with wireless
transmission (2-B), or an indicator holder (for digital
or dial indicators - 2-C). The latter can be selected in
a suitable size: standard or mini.
2-A
2-B
INTERFACE BOXES
3 NUMBER PLATE: it can be marked with the bore

gauge size or any other information required by the
customer.
4 CABLE GUIDE and CLAMP: they are present in the
pencil probe holder and prevent damages of the cable
due to tearing, pulling or bending at cable exit.
SOFTWARES
5 CABLE: it is a special reinforced cable ( 4,7 mm)

specifically developed for use in manual gauges,
which considerably reduces the risk of damage and
unintended torsion.
M1 STAR MBG - 2
2-C
TRANSDUCERS AND
M1 STAR - Standard Versions

68*
M1 STAR - Dedicated Solutions (Examples)

Dedicated Solutions complete the standard product line, and provide solutions for measuring conditions outside the
capabilities of Standard Bore Gauges. A wide range of special measuring solutions are available, for your applications,
with our series of dedicated plug-heads (on request). Please enclose a workpiece drawing with your enquiry.
WITH LONG NOSEPIECE

Guides the plug head when measuring discontinuous/interrupted deep
bores.
Example: cylinder block.
FOR PARALLEL WALLED BORES

To be used for gap measurements.
Example: keyways or splines
WITH PILOT CONE

For CNC automatic applications the
cone helps the entry of the nosepiece
into the workpiece, reducing the possibility of accidental damages.
WITH CARBIDE BAR INSERTS

The carbide bars will increase the
life of the gauge, reducing the wear
on the nosepiece and preventing
jamming caused by the presence of
metal cinders swarf or debris.
BORES WITH CENTRAL HUB

For the measuring of internal diameters where there is a central hub
projection.
Example: automatic transmission
components.
OUTSIDE DIAMETER
For the measuring of the ending section
of flywheel shafts, or the short outside
diameters often found on transmission
& pump components and end caps on
electric motors etc.
V-SHAPED PLUG HEAD

Designed for the measurement of
straight sided gaps in crankshafts or
similar components.
CONE SHAPED PLUG HEAD

For tapered bores.
Example: front or rear knuckles.
MACRO-LITE
Particularly light and easy to be used
for diameters up to 500 mm.
Example: large pipes, oil & gas industries.
3 POINTS MEASURING
For shape and roundness checking.
Example: tri-lobed or irregular shaped
bores.
RIGHT ANGLE PLUG HEAD

For measuring bores with perpendicular axis to the direction of gage insertion, or for limited space applications.
Example: differential carrier.
OVAL-SHAPED PLUG HEAD

Designed for measuring oval bores or
inter-connecting bores.
Example: lobe pump designs in fuel
and oil pumps.
M1 STAR MBG - 3
For through bores.
BENCH GAUGES
MBG-T Plug Heads
For superblind bores.

DISPLAY UNITS
MBG-SB Plug Heads
For blind bores.
INTERFACE BOXES
MBG-B/BC Plug Heads
SOFTWARES
1*
BORE GAUGES LINE
MBG B 2,53,5 *
MBG BC 1,5 *
Dimensional Specifications of Standard Versions

TRANSDUCERS AND
min* 3 to <4
PLUG HEAD MBG-b
BENCH GAUGES
15,8
14.8
3 A/F
2,5
M 3.5 x 0.35
M 3.5 x 0,35
21,3
14,4 MIN
3,9
3 A/F
M 3,5 x 0,35
2,5
13,4 MIN
1,5
21,3
14,8 MIN
3 A/F
4,5
13,8 MIN
2,5
3 A/F
M3,5 X 0,35
4,5
1,5
24,3
25,8
17,4 MIN

DISPLAY UNITS
M3,5 X 0,35
3 A/F
22,3
M3,5 X 0,35
1.5
3 A/F
22,3
3,9
4,3
4,3
M 3.5 x 0,35
min* 4 to < 4,5

min* 4,5 to < 5,5
21.3
22,3
min* 5,5 to < 7,5
BORE GAUGES LINE

INTERFACE BOXES
min* 7,5 to < 9,5
PLUG HEAD MBG-bc
5,3
15,9 MIN
M 3,5 X 0,35
1,5
5,3
4 A/F
4 A/F
33
34,5
D
22,6 MIN
6 A/F
7,4
21,1 MIN
M 3,5 X 0,35
M3,5 X 0,35
6 A/F
7,4
1,5
* min = minimum bore diameter
measuring contacts for plug heads type

carbide or
dlc - coated
D
3 <5,5
5,5 <7,5
7,5 <9,5
SOFTWARES
R1
0,25
0,5
1,5
R2
0,75
1
2,5

carbide or
dlc - coated
diamond
R1
0,75
R2
-
D
3 <5,5
5,5 <7,5
7,5 <9,5
M1 STAR MBG - 4
R1
0,25
0,5
1,5
R2
0,75
1
2,5
BC
diamond
R1
-
R2
-
25,8
20,8
18,3 MIN
13,3 MIN
4,5
1
M 3.5 x0.35
M 3,5 X 0,35
3,5 A/F
4,5
3,5 A/F
28,8
23,8
15,4 MIN
M 3,5 X 0,35
4 A/F
M 3,5 X 0,35
5,3
20,4 MIN
5,3
4 A/F
37,5
32,5
7,4
M3,5 X 0,35
D
25,6 MIN
20,6 MIN
M3,5 X 0,35
6 A/F
7,4
6 A/F

carbide or
dlc - coated
D
3 <5,5
5,5 <7,5
7,5 <9,5
R1
0,25
0,5
1,5
R2
0,75
1
2,5
SB
carbide or
dlc - coated
diamond
R1
-
R2
-
D
4,5 <5,5
5,5 <7,5
7,5 <9,5
M1 STAR MBG - 5
R1
0,25
0,5
1,5
R2
0,75
1
2,5
N.A.
BENCH GAUGES
1
3 A/F
M 3,5 x0,35
min* 4,5 to < 5,5
min* 5,5 to < 7,5
12,9 MIN
min* 7,5 to < 9,5
20,8
3,9
min* 4 to < 4,5
N.A.

DISPLAY UNITS
INTERFACE BOXES
4,3
M 3,5 x 0,35
diamond
R1
0,75
R2
-
SOFTWARES
3 A/F
BORE GAUGES LINE
min* 3 to<4
20,8
14,3
TRANSDUCERS AND
PLUG HEAD MBG-t
PLUG HEAD MBG-sb
Dimensional Specifications of Standard Versions

TRANSDUCERS AND
BENCH GAUGES
min* 20 to < 26
min* 15 to < 20
PLUG HEAD MBG-bc

D
L MIN
M6 X 0,75
9,4
N.A.
40,5
8,5 A/F
40,5
22
11,8
M 6 X 0,75
8,5 A/F
N.A.
41

DISPLAY UNITS
min* 26 to < 300
BORE GAUGES LINE
min* 9,5 to < 15
PLUG HEAD MBG-b
22,5
11,8
M 6 X 0,75
8,5 A/F
3,5
** 27,8 For diameters from 150 to

300 mm
48,7
D
27,3**
25,9
M 10 X 1
23 A/F
3,5
INTERFACE BOXES

carbide or
dlc - coated
D
9,5 <15
15 <16
16 <20
20 <26
26 <32
32 <300
R1
2
2
2
2
4
4
R2
3,5
5
5
5
10
10
diamond
R1
0,75
0,75
2
2
2
4
R2
5
10
SOFTWARES
M1 STAR MBG - 6
N.A.
38,5
11,8
43,5
D
20
25
11,8
M 6 X 0,75
M6X 0,75
8,5 A/F
23 A/F
51,2
D
29,8
25,9
48,7
27,3**
25,9
M10 X 1
6
53,2
D
31,8**
min* 40 to < 300
** 32,3 For diameters from 150 to

300 mm
25,9
M 10 X 1
23 A/F
M10 X1
23 A/F
** 27,8 For diameters from 150 to 300 mm
D
9,5 <15
15 <26
26 <300
carbide or
dlc - coated
R1
2
2
4
R2
3,5
5
10
SB
diamond
R1
-
R2
-
D
9,5 <15
15 <16
16 <26
26 <32
32 <300
M1 STAR MBG - 7
carbide or
dlc - coated
R1
2
2
2
4
4
R2
3,5
5
5
10
10
TRANSDUCERS AND
INTERFACE BOXES
9,4
8,5 A/F
9,4
diamant
R1
0,75
0,75
2
2
4
R2
5
5
10
SOFTWARES
8,5 A/F
BENCH GAUGES
M 6 X 0,75
M6 X 0,75

DISPLAY UNITS
D
L MIN
BORE GAUGES LINE
L MIN
min* 15 to < 26
43,5
D
min* 26 to < 40
38,5
min* 9,5 to < 15
PLUG HEAD MBG-t
PLUG HEAD MBG-sb
TRANSDUCERS AND
Standard Handles
PENCIL PROBE HANDLES
136
2TPL3F2000
2TPL3H2000
2TPL600000
2TPL6F2000
2TPL6H2000
M10/M6
237,5
(mm)
2TPLA00000
M3,5
2TPLAF2000
2TPLAH2000
239,5
(mm)
39
A full range of pencil probe handles is available on request, such as for example:
handle with 3/8clamping diameter
RedCrown probe with cable length L=4 m or 5 m
RedCrown probe with Lumberg S3
RedCrown unplugged probe compatible to amplifiers of other manufacturers (AirGage, Hommel/Etamic, Mahr Federal, Metrel, Metem, Mercer, Mitutoyo, Tesa, etc
3/8
2TCL4S0000
8 mm h6
2TCL6S0000
3/8
2TCL7S0000
8 mm h6
2TCLAS0000
3/8
2TCLBS0000
M6
M10
L min
2TCL3S0000
169
189
(mm) (mm)
M10
L max
8 mm h6
M3,5
D= D=
8 mm 3/8
L
Order code
D
25
39
M10
190
210
(mm) (mm)
M3,5/M6 M3,5/M6
192 212
(mm) (mm)
23,9
M
M6
SOFTWARES
M10
Order code
8 mm h6
2TCS3S0000
3/8
2TCS4S0000
8 mm h6
2TCS6S0000
3/8
2TCS7S0000
8 mm h6
2TCSAS0000
3/8
2TCSBS0000
M1 STAR MBG - 8
D= D=
8 mm 3/8
L min
M3,5
Clamping Diameter
88
108
(mm) (mm)
M10
L max
Thread M
INTERFACE BOXES
MINI INDICATOR HANDLE
77,5

DISPLAY UNITS
Clamping Diameter
160,5
Thread M
136
BENCH GAUGES
INDICATOR HANDLE
34
M10
2TPL300000
53
BORE GAUGES LINE
M6
Order code
Without Pencil Probe - 8 mm h6 Clamping

Diameter
With RedCrown LVDT 1 mm, cable length
L=2 m, Lumberg SV50/6 connector
With RedCrown HBT 1mm, cable length
Diameter
With RedCrown HBT 1 mm, cable length
Diameter
With RedCrown HBT 1 mm, cable length
M3,5
Type
34
Thread M
D
25
M10
128
108
(mm) (mm)
M3,5/M6 M3,5/M6
110 130
(mm) (mm)
TRANSDUCERS AND
HOOKS
Eye hook
Hooks to hang up the M1 Star MBG bore gauges are available in two styles,
for all handle types as shown (see the figures).
T-shaped
hook
Order Code
1T0JHS0810
1T0JHS0811
1T0JHS0812
INDICATOR PROTECTIVE SHELLS
Protective shells guarantee the indicator from accidental damages caused

by dropping or side impact, etc.
Description
Order Code
39 mm
2T0DIPS001
Protective shell for digital

Indicator
52 mm
2T0DIPS000
BENCH GAUGES
Depth (P)
Protective shell for mechanical

Indicator
67
BORE GAUGES LINE

Description
Eye hook for pencil probe handle
T-shaped hook for pencil probe handle
Eye hook for indicator handle
Order Code
INTERFACE BOXES
2T0DICS000
StaNDS
Used on the bench, these stands position the gauge in a vertical or horizontal
attitude, allowing the workpiece to be referenced or located on the plug.
Description
Order Code
Adjustable base for MBG
2TS0000001
Standard base for MBG
2TS0000002
M1 STAR MBG - 9
Adjustable base
Standard base
SOFTWARES
Description
Protective dome for the upper lifting rod of Quick

Digit indicator

DISPLAY UNITS
PROTECTIVE DOME FOR QUICK-DIGIT
TRANSDUCERS AND
handles with Wireless Transmission

i-WAVE HANDLE WITH ALKALINE BATTERIES
240,6
Description
Order Code
i-Wave handle with alkaline batteries (one adapter

for plug heads with M6 and M10 thread is included
in the supply)
3TJ0SFB000
37
255
Description
Order Code
3TJ0SFI000
37
CLIP ON MANUAL CHARGER

Description
Order Code
Clip On manual charger for i-Wave handle with

Li-Ion batteries (the power supply unit is included
in the supply)
2T0IRMS000
BENCH GAUGES
STAND CHARGER WITH PLUG SUPPORT

Description
Order Code

DISPLAY UNITS
Stand with battery charger for i-Wave handle with

Li-Ion batteries
2T0IRBS001
Power supply unit for one stand with battery charger
2T0IRCS000
Power supply unit and junction box for up to four

stands with charger
2T0IRSS004
INTERFACE BOXES
Other Accessories
ROTARY SPACERS
37
The rotary spacers make it possible to have the indicator dial always facing
the operator, even during dynamic measurements.
SOFTWARES
Plug gauge thread A (1)

M6X0,75
M10X1
B=M10 x 1
31,7
i-Wave handle with Li-Ion inductive batteries (one

adpter for plug heads with M6 and M10 thread is
included in the supply)
Order Code
2TR060S000
2TR100S000
(1)NOTE: Thread A: plug gauge-side thread - Thread B: handle-side thread
M1 STAR MBG - 10
56,5
BORE GAUGES LINE
i-WAVE HANDLE WITH LI-ION BATTERIES
TRANSDUCERS AND
ANGLE ADAPTORS
A
The angle adaptors are needed when space is limited and the position of
the bore is a 90 to the direction of insertion.
32,5
15
21,5
(1)NOTE: Thread A: handle-side thread - Thread B: plug gauge-side thread
4
M6x0,75
7 A/F
M3,5x0,35
=8
=4
Order Code
20
30
40
50
65
80
100
125
250
500
4 (mm)
2TXMS40020
2TXMS40030
2TXMS40040
2TXMS40050
2TXMS40065
2TXMS40080
2TXMS40100
2TXMS40125
-
7,5 (mm)
2TXMS70020
2TXMS70030
2TXMS70040
2TXMS70050
2TXMS70065
2TXMS70080
2TXMS70100
2TXMS70125
2TXMS70250
-
15 (mm)
2TXMSF0050
2TXMSF0065
2TXMSF0080
2TXMSF0100
2TXMSF0125
2TXMSF0250
2TXMSF0500
7,5
M6x0,75
M6x0,75
7 A/F
=7,5
15
M10x1
13 A/F
=15
M10x1

DISPLAY UNITS
length
L (mm)
SPECIAL DEPTH EXTENSIONS

For special applications and used where the extension diameter must not exceed the plug head size:
(mm)
3,8
4,8
5,3
L
(mm)
Order Code
20
2TXMS30020
65
2TXMS30065
65
2TXMS50065
80
2TXMS50080
65
2TXMS60065
80
2TXMS60080
65
2TXMS80065
80
2TXMS80080
100
2TXMS80100
125
2TXMS80125
M1 STAR MBG - 11
M6x0,75
7 A/F
M3,5x0,35
=8
L
M6x0,75
7 A/F
BENCH GAUGES
The extensions make it possible to reach the deeper measuring positions,

when inserted between the plug head and the handle:
INTERFACE BOXES
DEPTH EXTENSIONS
M6x0,75
=8
SOFTWARES
M10 X 1
Order Code
2TAS630000
2TAS660000
2TAS6A0000
2TASA30000
2TASA60000
2TASAA0000
BORE GAUGES LINE
M6 X0,75
P (mm)
3,7
4,2
13,1
3,7
4,2
13,1
26
Thread A (1)
Thread B (1)
M3,5 X 0,35
M6 X 0,75
M10 X 1
M3,5 X 0,35
M6 X 0,75
M10 X 1
TRANSDUCERS AND
THREAD ADAPTORS
Thread adaptors improve applications capability and interchangeability of the

accessories.
CH
A/F
Standard thread adaptors:
BORE GAUGES LINE
Thread A (1)
M3,5X0,35
M3,5X0,35
M6X0,75
RANGE
3 - 9,5
3 - 9,5
9,5 - 26
Thread B (1)
M6X0,75
M10X1
M10X1
A/F
7
13
13
T (mm)
1
2
2
Order Code
1TA0350600
1TA0351000
1TA0601000
Protective thread adaptors (for plug heads with M3,5x0,35 thread)
RANGE
3-4
4 - 4,5
4,5 - 5,5
5,5 - 7,5
7,5 - 9,5
Thread A (1)
M3,5X0,35
Thread B (1)
A/F
6
6
6
6
9
M6X0,75
T (mm)
6
6
6
6
9
Order Code
1TAP350600
1TAP350601
1TAP350602
1TAP350603
1TAP350604
CH
A/F
T
(1)NOTE: Thread A: plug head-side thread - Thread B: handle-side thread - The dimension
T is designed according to the required measuring depth.
DEPTH STOPS
The depth stops are used to accurately define the position of the measuring section and can be placed at a specific
position on either the nosepiece or depth extension.
DEPTH STOPS FOR NOSEPIECE

D
min Bore
(mm ) (inch)
(mm)
(inch)
40 < 45 (1.5748 < 1.7716) 71 (2.79)
45 < 50 (1.7716 < 1.9685) 76 (2.99)
50 < 60 (1.9685 < 2.3622) 86 (3.38)
60 < 70 (2.3622 < 2.7559) 96 (3.77)
70 < 80 (2.7559 < 3.1496) 106 (4.17)
80 < 90 (3,1496 < 3.5433) 116 (4.56)
90 100 (3.5433 3.937) 126 (4.96)
D
min BORE +
8 mm
M4
< 0,2 mm
DEPTH STOPS FOR EXTENSION

B (mm) D (mm)
4
7,5
INTERFACE BOXES
15
32
42
45
75
110
160
220
M4
h (mm)
d (mm)
Order Code
32,8
34,8
26
36
38
2TDEM040A0
2TDEM075A0
2TDEM150A0
2TDEM150B0
2TDEM150C0
2TDEM150D0
2TDEM150E0
45
44
79
117
177
56
91
129
189
141
201
68
103
153
213
SOFTWARES
M1 STAR MBG - 12
d
d
d
Edition 10/2014 - Specifications are subject to modifications - Copyright 2014 Marposs S.p.A. (Italy) - All rights reserved

DISPLAY UNITS
D
(mm ) (inch)
(mm)
(inch)
8 < 11 (0.3150 < 0.4331) 33 (1.29)
11 < 15 (0.4331 < 0.5905) 37 (1.45)
15 < 20 (0.5905 < 0.7874) 42 (1.77)
20 < 25 (0.7874 < 0.9842) 51 (2.00)
25 < 30 (0.9842 < 1.1811) 56 (2.20)
30 < 35 (1.1811 < 1.378) 61 (2.40)
35 <40 (1.378 <1.5748) 66 (2.59)
10
BENCH GAUGES
min Bore
The i-Wave communicates wirelessly to Bluetooth enabled MARPOSS electronic displays and measurement units, such as: Merlin, Merlin Mobile, E9066 and E4N Wave. Communication software, developed by
MARPOSS, is also available to allow connection of the i-Wave to commercial computers.
E9066T
MERLIN
MERLIN MOBILE
E4N WAVE
The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc. and any use of such marks by Marposs is under license.
Other trademarks and trade names are those of their respective owners.
i-WAVE - 1
TRANSDUCERS AND
BENCH GAUGES
DISPLAY UNITS
Electronic Interfaces
INTERFACE BOXES
I-WaveTM is an innovative interface handle featuring Bluetooth

transmission technology, which
allows mechanical gauges to
be interfaced wireless to various
electronic displays.
Any mechanical gauge head with
M10, M6 or M3,5 thread can be
mounted very quickly by means
of an adapter. By simply pressing
the button on top of the handle,
the measured value is displayed
in real time on the electronic unit.
SOFTWARES
WIRELESS INTERFACE
HANDLE
The robust and reliable StarLock system allows gauge

head changeover in just few
seconds, without need of any
tool.
Wireless offers following advantages: No cable entanglement
or breaks, ergonomic operations, measuring directly at the
machine.
The i-Wave handle contains the
Bluetooth transmitter and power supply batteries. It is available with standard C alkaline
or Li-Ion inductive rechargeable
batteries, allowing approx. 220
or 40 hours continuous working
time respectively.
The i-Wave guarantees excellent repeatability of 1 micron or
.000040 inch.
Thanks to IP67 protection rating
it can be used even in severe
shop floor environments.
The measurement value is
transmitted at a distance of up
to 10m to the associated electronic display unit. This is done
even in the manufacturing environment in a safe and reliable
way.
BORE GAUGES LINE
MAIN CHARACTERISTICS
TRANSDUCERS AND
Technical Specification of the i-WAVE Handle

BATTERIES
TYPE
PROTECT. DEGREE
MIN. DURATION
Alkaline Type C
220 hours*
Inductive Li-Ion**
40 hours*
IP67
COMMUNIC. DISTANCE
WEIGHT
Bluetooth
Class 2
(10m)
540g
BORE GAUGES LINE
* The duration of the batteries can be further increased up to several months in normal operating conditions by means of the
programmable auto-shutdown option (Power Safe mode).
**For a full charge of the battery 5 to 6 hours are required. 2 hours are enough to reach 80% of the full charge.
Description
Order Code
240,6
i-Wave Handle with alkaline batteries (one adapter for plug

heads with M6 and M10 thread is included in the supply) (*)
3TJ0SFB000
i-Wave Handle with Li-Ion inductive batteries (one adapter

for plug heads with M6 and M10 thread is included in the
supply) (*)
3TJ0SFI000
Clip On manual charger for i-Wave handle with Li-Ion batteries (the power supply unit is included in the supply)
2T0IRMS000
Stand with battery charger for i-Wave handle with Li-Ion

batteries
2T0IRBS001
2T0IRCS000
Power supply unit and junction box for up to four stands

with charger
2T0IRSS004
255
37
BENCH GAUGES
(*) Adapters for gauge heads with thread M3,5 or from other manufacturers are available on request.

DISPLAY UNITS
Battery Charger Application Examples
INTERFACE BOXES
Clip on charger
Charging station
SOFTWARES
i-WAVE - 2
37
DESCRIPTION
Standard Measuring Range
For Type B and T (mm)
Extended Measuring Range
For Type B and T (mm)
Standard Measuring Range
For Type SB (mm)
Repeatability (2,77 ) (m)
Thermal Drift (m/C)
WORKING RANGE
3-8
8 - 13
0,050
3-6
0,050 - 0,070
0,060
6-8
0,050 - 0,100
8 - 13
0,060 - 0,150
13 - 26
26 - 50
50 - 150
150 - 375
0,070
0,080
13 - 26
26 - 38
38 - 150
150 - 375
0,060
0,070
0,060 - 0,200
0,070 - 0,200
0,070 - 0,350
0,080 - 0,300
13 - 26
26 - 50
50 - 150
150 - 375
0,060
0,5
0,3
the working range can be further extended, on request, through a dedicated design of the bore gauge
M1 STAR EBG - 1
0,070
0,070
TRANSDUCERS AND
BENCH GAUGES
DISPLAY UNITS
Application range
Diameters from 3 to 375 mm, with
a measurement section depth up
to 500 mm.
Accuracy
Marposs completely friction-free
measurement reading system
ensures repeatability within 0.5
microns, constant over the entire
application range. Each plug is
delivered with a certificate of individual testing of the product.
Electrical compatibility
The EBG plug heads are available with Marposs standard
INTERFACE BOXES
M1 Star is an innovative line of

manual gauges for measuring the
diameters of bores.
Thanks to the application experience Marposs gained through the
M1 Electron, a product that boasts
an extremely extensive diffusion, with
more than 100,000 units present in
all sorts of industrial environments,
the M1 Star EBG (Electronic Bore
Gauge) is the ideal manual electronic gauge for measuring the
diameter, ovality and cylindricity of
bores, wherever a high-precision
performance is required.
0,080
SOFTWARES
MAIN CHARACTERISTICS
Electronic BORE GAUGE
LVDT or HBT transducer. The

compatibility to third party electronic units is obtained by means
of special cables.
Versatility of application
The connection between plug
head and cable is made with
a connector allowing quick replacement of the plug head itself. The extensive linearity range
of the transducers used in the
M1 Star EBG requires only one
zero-setting ring.
Sturdiness and resistance to
environmental factors
The M1 Star EBG has been designed to be used in the harshest production environments.
Guaranteed IP67 protection (waterproof, dirt and dust sealed)
with excellent resistance to impacts and accidental falls, plus
replaceable tear resistant cable
make the EBG sturdy and reliable, thus reducing maintenance
costs and down times to a minimum.
Supply conditions
The most advanced engineering and production processes
allow Marposs to offer the EBG
with extremely competitive pricing and fast delivery times. The
M1 Star EBG is also available for
customized OEM supplies.
BORE GAUGES LINE
Electronic Bore Gauge
TRANSDUCERS AND
M1 Star EBG
Electronic Bore Gauge
1 NOSEPIECE: it is the guiding element ensuring that

operators ability does not affect the measurement result.
2 MEASURING CONTACTS: they are available in various
radii and materials (carbide, diamond and DLC), depending
on the type of part to be measured.
BORE GAUGES LINE
3 MEASURING ARMSET: this element is composed, depending on the measuring range, of two or four fingers with
a fulcrum. The built-in LVDT or HBT transducer is extremely
precise, reliable and durable (IP67 waterproof, frictionless)
and mechanically transduces the acquired measurement
into an electrical signal proportional to the movement.
4 SIGNAL-PROCESSING ELECTRONIC UNIT: the embedded electronic circuit allows to perform a fine adjustment
of the sensitivity and is totally protected (IP67 protection
degree).
5 CONNECTOR: it connects the plug head to the cable,
making retooling a simple operation and reducing the cost
for repairs.
6 HANDLE: The ergonomic design and the antislip surface
allow a safe handling of the bore gauge. Under the product
label a plate is available, on which any information required
by the customer can be marked.
BENCH GAUGES
7 CABLE EXTENSION: It is a special reinforced cable

(
4,7 mm) specifically developed for use in manual gauges,
with considerably reduces the risk of demage and unintended torsion. It complies with EMC Standards for manual
gauges.

DISPLAY UNITS
8 CONNECTION TO ELECTRONIC DISPLAY UNIT: for

connection to electronic display units the EBG is supplied
with a Lumberg type SV50/6 or S3. Extensions with dedicated connectors can be supplied, making it possible to
achieve compatibility with many of the electronic display
units available on the market.
INTERFACE BOXES
SOFTWARES
M1 STAR EBG - 2
TRANSDUCERS AND
Dimensional Specifications of Standard Plug Gauges

PLUG head EBG-T
PLUG head EBG-b

57
13
D
17,5
17,5
2,5
M20X1
37
40,5
49
17,5
2,5
M20X1
37
40,5
49
77
80,5
17,5
21
D
17,5
M20X1
2,5
57
49
17,5
M20X1
6
60,5
49
77
80,5
22,5
26
D
17,5
M20X1
2,5
57
49
17,5
M20X1
6
60,5
49
contacts for
INTERFACE BOXES
B-type plug heads
D
3 <6
6 <7
R1
0,25
0,5
R2
1
contacts for
diamond
carbide or dlc
R1
-
T-type plug heads

diamond
carbide or dlc
R2
-
D
3 <6
6 <7
M1 STAR EBG - 3
R1
0,25
0,5
R2
1
R1
-
R2
-
SOFTWARES
49

DISPLAY UNITS
17,5
M20X1
BENCH GAUGES
16
60,5
12,5
min* 4 < 5
57
min* 5 < 6
49
min* 6 < 7
M20X1
BORE GAUGES LINE
9,5
min* 3 <4
60,5
TRANSDUCERS AND

PLUG head EBG-b
PLUG head EBG-T
BORE GAUGES LINE
min* 7 <8
61
64,5
2,5
M20X1
M20X1
42,5
49
46
49
2,5
M20X1
62,5
M20X1
66
49
104,5
101
BENCH GAUGES
2,5
M20X1
82,5
49

DISPLAY UNITS
min* 13 < 20
84,5
49
min* 9 < 13
min* 8 < 9
81
M20X1
86
49
102,5
105,5
M20X1
83
49
M20X1
86
49
INTERFACE BOXES
contacts for
B-type plug heads
carbide or dlc
D
7 <8
8 <10,5
10,5 <13
13 <20
SOFTWARES
R1
0,5
1,5
1,5
2
R2
1
2,5
2,5
5
contacts for
diamond
R1
0,4
0,4
0,75
2
T-type plug heads
carbide or dlc
R2
5
D
7 <8
8 <10,5
10,5 <13
13 <20
M1 STAR EBG - 4
R1
0,5
1,5
1,5
2
R2
1
2,5
2,5
5
diamond
R1
0,4
0,4
0,75
2
R2
5
TRANSDUCERS AND

PLUG head EBG-T
PLUG head EBG-b
3,5
M20X1
86
49
83,5
49
BORE GAUGES LINE
M20X1
min* 20 <26
105,5
103
67,8
27,3
M20X1
25,9
31,8
min* 40 < 74
28,9
15
3,5
M20X1
72,3
15
M20X1
25,9
29,8
BENCH GAUGES
min* 26 <40
70,3
15
72,3
31,8
15
28,9
M20X1
29
3,5

T handles available from >200mm
contacts for
B-type plug heads
carbide or dlc
D
20 <26
26 <32
32 <375
R1
2
4
4
R2
5
10
10
contacts for
diamond
R1
2
2
4
T-type plug heads
carbide or dlc
R2
5
10
D
20 <26
26 <32
32 <375
M1 STAR EBG - 5
R1
2
4
4
R2
5
10
10
diamond
R1
2
2
4
R2
5
10
SOFTWARES
M20X1
min* 74 < 375
27,3
INTERFACE BOXES
67,8
15

DISPLAY UNITS
TRANSDUCERS AND
Dimensional Specifications of Standard Plug Heads
101,3
M20X1
81,8
49
67,8
15
27,3
min* 26 < 74
BORE GAUGES LINE
min* 13 <26
PLUG head EBG-Sb
M20X1
25,9
67,8
27,3
contacts for
M20X1
SB-type plug heads
carbide or dlc
25,9

DISPLAY UNITS
13 <26
26 <375
R1
R2
2
4
5
10
diamond
R1
-
R2
-

T handles available from >200mm
INTERFACE BOXES
Standard Handles
HANDLE FOR BORE GAUGE WITH CABLE
Description
Order Code
39
BENCH GAUGES
min* 74 < 375
15
SOFTWARES
Handle without cable
2THS000000
34
Cable 2 mt LVDT - connector SV50/6

Cable 3,5 mt LVDT - connector SV50/6
Cable 5 mt LVDT - connector SV50/6
Cable 2 mt LVDT - connector S3
Cable 2 mt TESA COMPATIBLE - connector SV50/6
Cable 2 mt HBT - connector SV50/6
Cable 3,5 mt HBT - connector SV50/6
Cable 5 mt HBT - connector SV50/6
2TG0000026
2TG0000356
2TG0000056
2TG0000023
2TG00TS026
2TG0001026
2TG0001356
2TG0001056
220
M1 STAR EBG - 6
136
TRANSDUCERS AND
handles with Wireless Transmission

WAVE HANDLE WITH ALKALINE BATTERIES
208,7
Description
Order Code
2TW0SFB000
37
WAVE HANDLE WITH LI-ION INDUCTIVE BATTERIES

223
Description
Order Code
Wave handle with Li-Ion inductive batteries
2TW0SFI000
37
Accessories
MECHANICAL INTERFACE FOR PLUG HEAD
Description
Order Code
2TIESF0000
BENCH GAUGES
Interface adapter to fix EBG plug heads to Wave

handle
CLIP ON MANUAL CHARGER

Description
Order Code

DISPLAY UNITS
2T0IRMS000
STAND CHARGER WITH PLUG SUPPORT

Description
Order Code
Stand with battery charger for Wave handle with

Li-Ion batteries
2T0IRBS001
2T0IRCS000
Power supply unit and junction box for up to four

stands with charger
2T0IRSS004
HOOKS
Eye hook
Hooks to hang up the M1 Star EBG bore gauges are available in two styles,
as shown (see the figures).
T-shaped
hook
INTERFACE BOXES
Clip On manual charger for Wave handle with Li-Ion

batteries (the power supply unit is included in the supply)
Order Code
1T0JHS0810
1T0JHS0811
M1 STAR EBG - 7
SOFTWARES
Description
Eye hook for handle with cable
T-shaped hook for handle with cable
BORE GAUGES LINE
Wave handle with alkaline batteries
TRANSDUCERS AND
DEPTH STOPS FOR NOSEPIECE
D
(mm)
71
76
86
96
106
116
126
min Bore
(mm)
40 < 45
45 < 50
50 < 60
60 < 70
70 < 80
80 < 90
90 100
D
min Bore +
8 mm
M4
< 0,2 mm
DEPTH STOPS FOR EXTENSION

B (mm) D (mm)
45
38
63,3
68
103
56
91
44
79
160
117
129
141
153
220
177
189
201
213
Order Code
2TDEE220A0
2TDEE220B0
2TDEE220C0
2TDEE220D0
2TDEE220E0
D
10
110
d (mm)
h (mm)
75
22
M4
d
d
d
EXTENSIONS
BENCH GAUGES
The stainless steel extensions, when inserted between the plug head and the
handle, make it possible to reach the correct position in a bore, where the
measurement must be read. The following codes can be ordered:

DISPLAY UNITS
Diameter Range (mm)
L (mm)
Order Code
26375
20
30
40
50
65
80
100
125
250
500
1TX0S00020
1TX0S00030
1TX0S00040
1TX0S00050
1TX0S00065
1TX0S00080
1TX0S00100
1TX0S00125
1TX0S00250
1TX0S00500
STAND
INTERFACE BOXES
Used on the bench, this stand positions the gauge in vertical or horizontal
position, or at any angle between 45 and +45 from vertical, allowing the
workpiece to be referenced or located on the plug. With 1 or 2 extra plug
support kit, it is possible to install up to 2 or 3 gauges on the same stand.
Description
Order Code
Multiposition Stand for EBG and MBG
2TS0001111
Extra plug support kit for stand 2TS0001111
2TS0002222
SOFTWARES
M1 STAR EBG - 8
Extra plug
support kit
Multiposition
Stand
BORE GAUGES LINE
D
(mm)
33
37
42
51
56
61
66
min Bore
(mm)
8 < 11
11 < 15
15 < 20
20 < 25
25 < 30
30 < 35
35 < 40
The M1 WAVE communicates wirelessly to Bluetooth enabled MARPOSS electronic displays and measurement units, such as: Merlin, Merlin Mobile, E9066 and E4N Wave. Communication software, developed by
MARPOSS, is also available to allow connection of the M1 Wave to commercial computers.
E9066T
MERLIN
MERLIN MOBILE
E4N WAVE
The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc. and any use of such marks by Marposs is under license.
Other trademarks and trade names are those of their respective owners.
M1 WAVE - 1
TRANSDUCERS AND
BENCH GAUGES
BORE GAUGES LINE

DISPLAY UNITS
Electronic Interfaces
INTERFACE BOXES
M1 WaveTM is an innovative bore

gauge featuring Bluetooth transmission technology, which offers
maximum flexibility and operating freedom while the measurements are performed. Wireless
offers following advantages: No
cable entanglement or breaks, ergonomic operations, measuring

directly at the machine.
M1 Wave is composed of a standard EBG (Electronic Bore Gauge) plug head with built-in transducer and of a handle containing
the Bluetooth transmitter and the
power supply batteries. It is avai-
SOFTWARES
WIRELESS bore gauge
lable with standard C alkaline or

Li-Ion inductive rechargeable batteries, allowing approx. 220 or 40
hours continuous working time
respectively.
By simply replacing the plug
head, the M1 Wave can be easily
retooled to measure different diameters.
By simply pressing the button on
top of the handle, the bore gauge
can communicate in real time with
the electronic display, showing the
measured value. With the same
button it is possible to acquire
data in order to perform statistical
operations, and to control advanced cycles or guided sequences.
The IP67 protection rating of the
entire M1 WAVE bore gauge guarantees reliability of the device
when used in severe shop floor
environments.
Due to the absence of mechanical
transmission errors, the M1 WAVE
guarantees excellent repeatability
of 0,5 micron or .000020 inch.
The measurement value is transmitted at a distance of up to
10m to the associated electronic
display unit. This is done even in
the manufacturing environment in
a safe and reliable way.
TRANSDUCERS AND
Technical Specification of the M1 Wave Handle

BATTERIES
TYPE
PROTECT. DEGREE
COMMUNIC. DISTANCE
WEIGHT
Bluetooth
Class 2
(10m)
540g
MIN. DURATION
Alkaline Type C
220 hours*
Inductive Li-Ion**
40 hours*
IP67
BORE GAUGES LINE
* The duration of the batteries can be further increased up to several months in normal operating conditions by means of the
programmable auto-shutdown option (Power Safe mode).
**For a full charge of the battery 5 to 6 hours are required. 2 hours are enough to reach 80% of the full charge.
Description
Order Code
Wave Handle with alkaline batteries
2TW0SFB000
Wave Handle with Li-Ion inductive batteries
2TW0SFI000
208,7
223
37
Interface adapter to fix EBG plug heads to Wave handle
BENCH GAUGES
DISPLAY UNITS
Clip On manual charger for Wave handle with Li-Ion batteries

(the power supply unit is included in the supply)
2T0IRMS000
Stand with battery charger for Wave handle with Li-Ion batteries
2T0IRBS001
2T0IRCS000
Power supply unit and junction box for up to four stands

with charger
2T0IRSS004
Battery Charger Application Examples
INTERFACE BOXES
Clip on charger
2TIESF0000
Charging station
SOFTWARES
M1 WAVE -
37

M1 Star Marposs

Uploaded by

Copyright:

Available Formats

M1 Star Marposs

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

M1 Star Marposs

Uploaded by

Copyright:

Available Formats

What is TESTAR's mission?

What is TESTAR's mission?

Where are TESTAR products developed?

Where are TESTAR products developed?

Testar, a Marposs division, is pleased to introduce its new catalogue of

products to satisfy your gauging needs.

TESTARs mission is to develop and offer innovative measuring

TESTAR headquarters team

Research & Development

An advanced information system, optimized for data transmission among

OEM - Products / Private Label

Compact transmission with axial

Column amplifiers with

Modular measuring system

YOUR NAME & LOGO = YOUR PRODUCT

Transducers and Measurement Transmissions

Bore Gauges Line

Forks and Ring Gauges

Indicators and Electronic Display Units

Interface Boxes for Data Acquisition

Marposs manufactures each

BORE GAUGES LINE

FORKS AND RING GAUGES

INDICATORS AND ELECTRONIC

Evolving from our customers

The Product Line

BORE GAUGES LINE

A line of analogue pencil probes, available with

FORKS AND RING GAUGES

Digitized version, with

A probe version linearized

INDICATORS AND ELECTRONIC

BORE GAUGES LINE

FORKS AND RING GAUGES

INDICATORS AND ELECTRONIC

STANDARD - AXIAL - SPRING

INDICATORS AND ELECTRONIC

FORKS AND RING GAUGES

F= Max. pretravel adj. value

F= Max. pretravel adj. value

BORE GAUGES LINE

STANDARD - RADIAL- SPRING

*** K= Reading (mm)

INDICATORS AND ELECTRONIC

FORKS AND RING GAUGES

F= Max. pretravel adj. value

BORE GAUGES LINE

F= Max. pretravel adj. value

STANDARD - RADIAL - PNEUMATIC PUSH

STANDARD - AXIAL - PNEUMATIC PUSH

SOFT TOUCH - AXIAL - SPRING

F= Max. pretravel adj. value

INDICATORS AND ELECTRONIC

FORKS AND RING GAUGES

BORE GAUGES LINE

F= Max. pretravel adj. value

SOFT TOUCH - RADIAL - SPRING

*** K= Reading (mm)

BORE GAUGES LINE