Alstom 12" LED Flashing Light Assembly

Switch Products
AURORA LED Gate Arm Light
130
Signal Products
In This Section:
Mast Assemblies
AURORA Complete Highway

Crossing Signals
AURORA Gate Arm Lights
AURORA 8, 12, 5.5 LEDs

PL100 Bayonet-Style Position
Light LED
Highway Crossing Components
Spectrom L Signals
Switch Products
Introduction
Types AT and AW Color Light Signals

Type SA1 Searchlight Signal
Roundel and Phankill Assemblies
131
Signals
Introduction
132
With more than 100 years of experience in signaling, Alstom

provides signal solutions for mainline railroad and rapid transit
wayside signals, interlockings, classification yards, and highway crossings. For the past century, Alstom has continually
improved the safety and design of their signals.
The AW and AT Color-Light signals are designed for use in

transit installations and are available with incandescent lamps
or LEDs. The latest enhanced design reduces spare parts
requirements, simplifies access for maintenance, lowers cost
of ownership, and increases safety.
The SA-1 Searchlight signals have proven to be the standard

for reliability, flexibility, and fail-safe design. They are available
in a high wayside signal or a 1 or 2 unit dwarf with a choice of
either a compound or stepped lens system.
The AURORA line of LED signals includes highway crossing

flashing light units (8" and 12") as well as crossing gate arm
flashing lights. The flashing light LED retrofit kits will replace
old incandescent lights in just about any highway crossing
installation. The AURORA gate arm kits come in a Quick Install
version that takes just ten minutes to install.
CALL 800.717.4477 FAX 585.274.8777
AURORA Complete Highway

8 and 12 Crossing Signals
The AURORA Highway Crossing Signal uses
rugged Light Emitting Diode (LED) technology as the light source instead of a conventional incandescent, filament bulb. The result is
an extraordinarily reliable highway crossing signal with a life expectancy of up to 100,000
hours, which is twenty times greater than an
incandescent bulb-based system.
The AURORA signal virtually eliminates phantom
signals since it contains no reflector dish. Phankills
are not required.
The AURORA Highway Crossing Signal is compatible with most AC and DC-based control systems for
fast, economical installation. AURORA Retrofit Kits
let you replace existing signals in the field. The kit
contains everything you need to replace conventional
bulb-based signals from:

GRS
Western-Cullen-Hayes
Premier Products
Modern Industries (Harmon)
Union Switch & Signal
Safetran Systems
12 LED
AURORA Highway Crossing Signals are ideal for

front-light, back-light or cantilever applications.
The signal meets chromaticity requirements for
red as recommended by AAR Manual Part 7.1.10,
CIE PUB 2.2-1975 and ITE VCSH 8.04. It also
complies with the Manual On Uniform Traffic
Control Devices.
Signals
2009 Alstom Signaling Inc.
www.alstomsignalingsolutions.com
133
AURORA Complete

Highway Crossing
Signals with LEDs
The new Alstom Complete Highway Crossing Signals are

now available for purchase. The housings are aluminum and
the backgrounds are powder coated, galvanized steel. Two or
four unit housings are available in various configurations including 8 or 12 signal units with either LED or incandescent
lights and 4 or 5 pole sizes.
These truly versatile Highway Crossing Signals will drastically

simplify specifying, maintaining and operating your signals.
16.25
8.25
6.375
3.5
Figure 3
Figure 1
8.25
16.25
5.5
6.375
Figure 4
Figure 2
9.5
Signals
3.5
134
Figure 5
CALL 800.717.4477 FAX 585.274.8777
AURORA Complete
Highway
Crossing Signals with LEDs

Specifications
Ordering Number
Reference
Signals
Signal Unit
55050-016-00
55050-017-00
55050-018-00
55050-019-00
55050-020-00
55050-021-00
55050-022-00
55050-023-00
55050-024-00
55050-025-00
55050-026-00
55050-027-00
55050-028-00
55050-029-00
55050-030-00
55050-046-00
55050-047-00
55050-048-00
55050-049-00
55050-050-00
55050-041-00
55050-042-00
55050-043-00
55050-044-00
55050-045-00
55050-031-00
55050-032-00
55050-033-00
55050-034-00
55050-035-00
55050-036-00
55050-037-00
55050-038-00
55050-039-00
55050-040-00
Figure 1
Figure 1
Figure 1
Figure 1
Figure 1
Figure 1
Figure 1
Figure 1
Figure 1
Figure 1
Figure 2
Figure 2
Figure 2
Figure 2
Figure 2
Figure 3
Figure 3
Figure 3
Figure 3
Figure 3
Figure 4
Figure 4
Figure 4
Figure 4
Figure 4
Figure 5
Figure 5
Figure 5
Figure 5
Figure 5
Figure 5
Figure 5
Figure 5
Figure 5
Figure 5
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
2 Signals
4 Signals
4 Signals
4 Signals
4 Signals
4 Signals
4 Signals
4 Signals
4 Signals
4 Signals
4 Signals
8 Inch with LED Module

12 Inch with 160 LED Module
8 Inch with Incandescents
4
5
4
4
5
5
4
5
4
5
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
4
5
4
4
5
5
4
5
4
5
Signals
For assistance in ordering any of these Complete Highway Crossing Signals, please contact the
Alstom Customer Service Center at 1-800-717-4477.
Pole Size (inches)
135
AURORA 8" and 12"

LED Retrofit
Highway Crossing Signal
Features
12 AURORA 300 and 160
Brightest signal available in the
market 1600 cd on axis (300)
Low cost high intensity
830 cd on axis (160)
Independent bright white LED
side lights for best viewing
Regulated power supply LED
unit emits constant light output
even at low voltages
Red high impact UV stabilized
outer lens
No focusing required
AURORA 12 LED Highway Crossing Retrofit
Compatible with all standard

highway crossing signal housings
Voltage turnoff at 7.5 volts
No phankill required
The AURORA 12" LED lamp unit measures 12 in diameter.

It is a self contained unit; the lens and individual LEDs are
not replaceable. The 12" LED unit is sealed and includes a
high impact, UV stabilized, outer lens and separate white
sidelights. A regulated power supply maintains constant
light output during supply voltage variation.
The 12" LED units are available in a retrofit kit for installation in any standard highway crossing signal housing. These
units are also available as a complete signal head with an
aluminum housing, 20 background, and hood.
Signals
Ordering Information
136
Product Name
Description
Ordering Number
AURORA 12 160
AURORA 12 300

AURORA 12 160

AURORA 12 300

AURORA 8"
12-inch AURORA Highway Crossing Signal Retrofit Kit

59649-200-02
$ 200.00
Ultra Bright 12-inch AURORA Highway Crossing Signal
Retrofit Kit
59649-200-03
$ 289.00
12-inch AURORA Highway Crossing Signal Complete with
Housing, 20-inch Dia. Background and Hood
59649-200-04
$ 569.00
Ultra Bright 12-inch AURORA Highway Crossing Signal
Complete with Housing, 20-inch Dia. Background and Hood 59649-200-05
$ 895.00
8-inch AURORA Highway Crossing Signal Retrofit Kit
59649-202-02
$ 199.00
CALL 800.717.4477 FAX 585.274.8777
Price
AURORA 8" and 12"
LED Retrofit
Highway Crossing Signal
Features
8 AURORA 160
Has 160 LEDs (850 candela intensity on axis)
Is designed to be a direct replacement for
incandescent bulbs, LED boards, or LED
modules that fit inside an 8 3/8 inch railway
crossing signal
Contains two side-lights, one on each side of
the signal, each containing 12 white LEDs
Is compatible with standard "8 inch" signal
housings
AURORA 12 LED Highway Crossing Retrofit
Performance Standards
Parameter
Standard
Environmental
Requirements
Operating Temperature
IP Rating
Electronic Noise
Storage Temperature
Photometric
Requirements
AREMA Standard Class B

MIL-STD 810
-40C to 70C
IP65
Meets AREMA Standard
-55C to 85C
Transport Canada Standard
The AURORA 8 LED light source, or LED lamp unit, measures 8.375" in diameter. It is a self contained unit; the lens
and individual LEDs are not replaceable. The 8" LED lamp
unit is a sealed unit that includes a high impact, UV stabilized, outer lens and separate white sidelights. A regulated
power supply maintains constant light output during supply
voltage variation. The unit contains two side-lights, one on
each side of the signal. The front LEDs are red and the sidelight LEDs are white.
Specifications
AURORA 160 (8.375 inch)
AURORA 160 (12 inch)
AURORA 300 (12 inch)
Operating Voltage
Current (Nominal)

Typical Power
Consumption
Dominant Wavelength
Peak Intensity
Temp. Range
Operating
Storage
8 to 20 VDC or 8 to 16 VAC
1.0 Amps at 10 VDC
1.1 Amps at 10 VAC
10 Watts at 10 VDC
11 Watts at 10 VAC
630 NM
850 Candela
1.0 Amps at 10 VDC
1.1 Amps at 10 VAC
10 Watts at 10 VDC
11 Watts at 10 VAC
630 NM
850 Candela
1.2 Amps at 10 VDC
1.3 Amps at 10 VAC
12 Watts at 10 VDC
13 Watts at 10 VAC
630 NM
1600 Candela
-40 C to + 70 C
-55 C to + 85 C
-40 C to + 70 C
-55 C to + 85 C
-40 C to + 70 C
-55 C to + 85 C
Signals
Data
137
AURORA 5.5 LEDRetrofit
Lamp Unit
Features
Available in Red, Yellow, Green
or Lunar White
Available with Adjustable

Brightness Adjusting Screw
Available With 60, 90 or 120 LEDs
Available in:
Wide Beam (30 Deg.LEDs)
Narrow Beam (15 Deg. LEDs) or
Concentric (8 Deg. LEDs)
With Back Light or No Back Light
Fits AW Signals and Spectrom L
5 Outside
Diameter 90 LEDs
Note: Indicators Only - Not Vital Signals
Ordering Number Configurator
Signals
138
TRANSIT
R
Y
G
W
RED
YELLOW
GREEN
LUNAR WHITE
60
90
12
60 LED
90 LED
120 LED
W
N
C
Wide 30 Degree LED

Narrow 15 Deg. LED
Concentric 8 Deg.LED
H
L
High (110 Volt)

Low (10 Volt)
A
X
Adjustable Brightness
Non-adjustable Brightness
B
X
Back Light
No Back Light
5 Outside
Diameter 60 LEDs
Specifications - Volt-Amps Consumed for 5.5" LED Signals

Version
Red
Yellow
Green
White
60 LED
90 LED
120 LED
5.6
7.1
8.0
5.2
6.0
8.0
5.6
6.5
8.0
5.6
6.5
8.0
Note: Can not order LED unit with both adjustable and back light.
CALL 800.717.4477 FAX 585.274.8777
AURORA LED PL100

Bayonet-Style Position Light LED
Features
State-of-the-art High Intensity
Surface Mount LEDs with `
Integrated Lens
Robust, Heavy Duty Packaging

Compatible with Standard
Bayonet Lamp Sockets
Designed with LEDs to be at

same dimensional position
as bulb filament in typical
assemblies
Long Life LED Technology

Reduced Maintenance Costs
from Lamp Burn-outs
PL100 Bayonet-Style
Position Light LED
Available in Lunar White
Note: Indicators Only - Not Vital Signals
Specifications
Data
Operating Voltage Range

Nominal Current Drawn (at 10V DC)
Typical Power Consumption
Minimum Luminous Flux (lumens at 10V DC)
Environmental Requirements

Operating Temperature Range
Value
8.5V to 12.0 VDC or AC
0.3A
3W at 10VDC
100 Lm
MIL-STD 810F
40C to 70C
Product Name
Description
PL100 Bayonet-Style Position Light LED (Lunar White)
Ordering Number
Price
47437-034-00
$ 89.00
Signals
139
AURORA Complete

Highway Crossing
Additional Componets
Crossing Sign
High Wind Guard
Complete Housing Assembly
Crossarms
(Includes hood, background, and housing
12 LED Kit
LEDGate Arm Light
AURORA Highway Crossing Componets
Also available from Alstom are additional

highway crossing components other than
the AURORA LED flashing light retrofit kits
and AURORA LED gate arm kits:
High Wind Guard
Protects the gate arm from possible
damage due to strong winds
Crossing Sign
RAILROAD CROSSING crossbuck sign
Flashing Light Housing Assembly

Complete 12 flashing light housing with
background and hood. Does not include
the LED light kit
Flashing Light Unit Crossarms
For two light units or four light units
Signals
Description
140
High Wind Guard

12 LED Kit
LEDGate Arm Light - Premium GAL 200
LEDGate Arm Light - Standard GAL 100
Complete Housing Assembly 12 (Includes: Case, terminal block, 20 dia. background, and hood.)
Does Not Include LED Light Kit
Ordering Number
Price
55329-006-00
59649-200-02
59649-201-03
59649-201-01
55051-013-00
$
$
$
$
$
CALL 800.717.4477 FAX 585.274.8777
149.00
200.00
379.00
259.00
995.00
Mast Assemblies
Typical Mast Assemblies
Mast assemblies are available in any height required and can

come complete with ladders, ladder foundation, platforms,
pinnacle, and junction box or split base.
They can be drilled for one, two or three signal heads. Please
contact Alstom with your specific requirements.
Ordering Information - Mast Assemblies

Drilled For Signal Heads
Base Type
2
2
2
2
3
3
Split
Split Junction Box
Split
Split Junction Box
Split
Split Junction Box
Ordering Number
Price
73001-124-01
73001-125-01
73001-126-01
73001-024-01
73001-128-01
73001-129-01
Call for price

Call for price
Call for price
$ 3,995.00
Call for price
Call for price
Ordering Information - Foundation

SPLIT BASE COMPLETE, for 5" mast

JUNCTION BOX BASE COMPLETE, with 24 terminal posts, for 5" mast
FOUNDATION, for ladder, includes bolts and nuts
PINNACLE, for 5" diameter mast
Ordering Number
Price
43951-017-01
43951-016-06
36773-000-01
56894-000-08
$ 1,299.00
$ 2,895.00
Call for price
$ 162.00
Signals
Description
141
AURORA LED
Gate Arm Light
The AURORAGate Arm Light is a cost-effective solution to

expensive, incandescent type gate arm lights. The AURORA
Gate Arm Light uses rugged Light Emitting Diode (LED) technology instead of a fragile filament bulb for illumination. Each
AURORA light has four wires for the electrical connection.
Like the AURORA Highway Crossing Signal, it offers customers an extraordinary life expectancy of up to 100,000 hours.
The AURORA Gate Arm Light uses less than 20% of the power
required by a conventional incandescent bulb-based system.
It is housed in an impact resistant plastic housing. The lights
are designed to hold up toknockdowns.
Features
AURORA Premium GAL 200
Quick Install - Complete installation
in only ten minutes with one tool
AURORA Standard GAL 100

Most cost-efficient LED gate arm
light available in the market
Complete kit with PLUG-IN

connectors and coil cords
Brightest LED gate arm light

available in the market
(Each unit contains 36 Ultra Bright
LEDs)
Signals
Brightest LED gate arm light

available in the market
(Each unit contains 36 Ultra
Bright or Super Bright LEDs)
142
LED viewing angle of 30 degrees

(Most LEDs in the market have
15 degree viewing)
Exceeds the AREMA recommended

70 degree beam spread
LED viewing angle of 30 degrees

(Most LEDs in the market have
15 degree viewing)
Exceeds the AREMA recommended

70 degree beam spread
Tested for over 200,000 operations

without a single LED failure
Tested for over 200,000 operations

without a single LED failure
Can be used with highway crossing

systems of any make and model
Can be used with highway crossing

systems of any make and model
CALL 800.717.4477 FAX 585.274.8777
AURORA LED
Gate Arm Light
Specifications
Data
Operating Voltage
Minimum Forward Current
Recommended Operating Voltage
Typical Max. Forward Current Draw(at 10 VDC)
Typical Max. Power Consumption (at 10 VDC per gate light)
Value
8.5 V AC/DC 12 V AC/DC
10 mA
10 VDC
0.35 Amps
3.5 Watts
Performance Standards
Parameter
Vibration (X, Y and Z axis)

P Rating
Electronic Noise
Storage Temperature
Range
MIL-STD 810F
-40C to 70C
IP65
Meets AREMA Standards
-40C to 85C
Product Name
Description
Ordering Number
Price
$ 259.00
$ 395.00
Signals
AURORA Standard
Set of three Ultra Bright Gate Arm Lights with installation hardware
59649-201-01
GAL 100

AURORA Premium
Set of three Ultra Bright Gate Arm lights with quick connect coil cords
59649-201-03
GAL 200
and hardware
Quick Install
143
Spectrom L
Switch Position Indicator
Features
Functions as a multi-purpose signal, route
indicator or switch position indicator with
normal or bi-directional aspects
Uses Industry Standard 5 LED Modules
Engineered Plastic Housing
Pole Mounted
Modular Design
Side Access to Terminations
Easy change out LED Modules
Lexan Features
Highest Flammability Rating (UL94-5VA)
Excellent UV Protection (UL94 f1 rated)
Switch Position Indicator
Superior impact properties

(ductile from -50 and above)
Low smoke properties (meets ASTM E662)
ECO conforming (no bromine, chlorine or
other halogens)

Signals
The Spectrom L Switch Position Indicator is comprised of

a 4 aspect housing with configurable lamp arrangements.
Typically a green aspect is displayed to indicate that the switch
machine is lying in the normal position and yellow indicates
reverse.
144
The signal is easily configurable and blanking plates are used

to cover unused positions when necessary. The Switch Position
indicator is pole mounted with accessible terminations through
the secure side panel.
For assistance in ordering and specification of the Switch Position Indicator please contact the
Alstom Customer Service Center at 800-717-4477.
Note: Units may be purchased with any of 5 retrofit lamp LEDs listed on page 13 of this section.
Lexan is a trademark of the General Electric Company.
CALL 800.717.4477 FAX 585.274.8777
SPECTROM LT
Signals for Transit
Features
LEXAN - Breakthrough Technology in Plastic
Housings allow for efficient applications in
ANY environment
Low Power Consumption and Long Life LEDs
Superior impact properties - ductile from -50
degrees C and above
Versatile Mounting and Positioning; 3 to 10
Lamp Positions
Convenient Side Access to Terminations
Ideal for Narrow Tunnel Applications
Easy change out led modules
Spectrom LT
The Spectrom L line of housings for switch-position indicators

and transit/railroad signals are designed to withstand the
harshest environmental conditions. Manufactured from
Lexan, a tough, long-life polycarbonate-siloxane copolymer
sheet and resin, the housings are corrosion and U.V. resistant,
non-conductive, and are designed to withstand flying debris
from tracks.
Housings for switch-position indicators can be pole mounted,

while those for transit signals can be pole-, ground-, or wallmounted. Spectrom L railroad signal housings, which are
available in standard sizes and shapes in many configurations,
are able to adapt to industry standard mounting hardware.
Five-inch and eight-inch LED modules are used in transit and
freight applications, respectively.
Specifications
Data
Value
Weight
Dimensions
-50 C and above

15 lbs. (3 aspect)
28h x 14d x 6 w (3 aspect)
For assistance in ordering and specification of the ALSTOM Spectrom L, please contact the
Alstom Customer Service Center at 800-717-4477.
Note: Units may be purchased with any of 5 retrofit lamp LEDs listed in our signal section on page.
Lexan is a trademark of the General Electric Company.
Signals
145
Type AT
Color - Light Signals
Features
Narrowest cast aluminum signal on the market
Ideal for places with minimal clearance
Available in both LED and incandescent types
Available in pole, wall, hat and horizontal mounted configurations
Easy access to the transformer terminal block and the wiring from
the back of the signal
All external protruding bolt threads have been eliminated to
safeguard workers from cuts and injuries
The Type AT Color-Light Signal is a compact unit designed for rapid transit lines
where clearances are very limited. The Type
AT Signal, ideal for underground (tunnel)
installation, is equipped with a single optical lens since the efficiency of a doublet lens
is not required in a dark environment. The
5 (12.7 cm) lens has a 3.5 (8.9 cm) focal
length.
The lens may be specified in red, yellow,

green, lunar white or clear. The modular
design of the Type AT Signal permits multiple units to be bolted together, one atop
the other, for the desired signal configuration. These signals are typically supplied
with mounting brackets for subway walls or
ceilings. When space is limited, the AT is the
perfect solution.
Signals
Specifications
146
Data
AT Signal
Height
Width
Depth
Aspect to Aspect Distance
Diameter of Outer Lens
Case Material
Bulb Operating Voltage
Bulb Wattage
Transformer Specification
28.75" (73.03 cm)

9.06" (23.01 cm)
6.13" (15.57 cm)
5.75" (14.61 cm)
5" (12.70 cm) Dia.
Aluminum
8-13 Volts
5 Watts
120/10 V Step Down
Type AT Color Light Signal
The Type AW and Type AT Color-Light Transit Signals are available in many different
arrangements of subassemblies and aspects with numerous options. Please contact the Alstom
Customer Service Center at 1-800-717-4477 for assistance in ordering a signal for your specific
application. Vandal Guards and Hoods are optional.
CALL 800.717.4477 FAX 585.274.8777
Type AW
Color - Light Signals
Features
All repairs from back of the signal, Including replacement of
the outer lens

Available in LED and incandescent applications
Ideal for tunnel and wayside applications
Simplified receptacle and door hasp design
Integrated door hinges reduce the time thats required to

remove or assemble the door by nearly 75%
Reduces spare part inventory by up to 40%
Available in pole, wall, hat and horizontal mounted configurations
All external protruding bolt threads have been eliminated

to safeguard workers from cuts and injuries
Available with track indicator unit. Displays numeral 00-99

programable with input RS 232
The Type AW Color-Light Signal is a compact signal designed for outdoor applications on
rapid transit lines. The LED signal uses a single clear roundal with a LED module behind
the roundal inside the case. The incandescent signal uses a doublet lens combination. The
6.375 (16.2 cm) clear outer lens has a 3.75 (9.53 cm) focal length. The 5.50 (13.97 cm)
inner lens maybe ordered in red, yellow, green, lunar white or clear. The modular design of
the Type AW Signals permits multiple units to be bolted together, one atop the other, for
the desired signal configuration. Enhanced design reduces spare part requirements, simplifies maintenance and lowers cost of ownership by up to 35% while delivering safe, reliable
service. The AWs flexibility makes it ideal for both wayside and tunnel installations.
Specifications
AW Signal
Height
Width
Depth
Aspect to Aspect Distance
Diameter of Outer Lens
Case Material
Bulb Operating Voltage
Bulb Wattage
Transformer Specification
39.75" (100.97 cm)

12.75" (32.39 cm)
8.736" (22.19 cm))
9.75" (24.27 cm)
6.38" (16.21 cm) Dia.
Aluminum
8-13 Volts
18 Watts and 25 Watts
120/10 V Step Down
Type AW Signal
The Type AW and Type AT Color-Light Transit Signals are available in many different arrangements of subassemblies and aspects
with numerous options. Please contact the Alstom Customer Service Center at 1-800-717-4477 for assistance in ordering a signal
for your specific application. Vandal Guards and Hoods are optional.
Signals
Data
147
Type SA-1
Searchlight Signal
Features
Aspect-checking contacts directly
operated by counterweights
Slanted color discs minimize

beam dilution
Choice of compound or stepped

lens system
Available with 20-degree deflecting

roundel or 30-degree Spredlite roundel
Wide choice of assemblies and wire

entrance couplings
Precision filament lamp needs no

refocusing when changing
Built-in sighting fixture

Built-in surge arrestor
Plug-in, cartridge-type, adjustable
lamp resistor
Optional phankill unit reduces

beam dilution
Signals
77
44
7-
71
0-
80
1-
Call Our Customer

Service Center
to Order
148
Type SA-1 Searchlight Signal
CALL 800.717.4477 FAX 585.274.8777
Type SA-1
Searchlight Signal
The Type SA-1 Searchlight Signal features an efficient electromagnetic structure, maximum back contact pressure, positive
contact closure and precise color-disc positioning. This signal
operates from battery or rectified AC-energy (8-12VDC).
The Type SA-1 Signal consists of a compact operating mechanism and a durable cast aluminum housing. The housing may
be bracket mounted to the side or front of the signal mast,
provided with a socket for mounting to the top of the mast or
provided with a base mounting for a concrete foundation.
Type SA-1 Lamp Receptacle with

Reflective Background
The Type SA-1 Signal projects three aspects through a single

optical system: red, yellow and green. This system supplies a
powerful light beam using minimal energy. The signal has been
designed to be fail-safe; if power is interrupted, it automatically
displays the most restrictive aspect.
The signal housing includes an 8.375" (21.3 cm) diameter
lens, hood, ventilators, background, mounting bracket, base,
or mounting socket. The unit's operating mechanism slides
easily into place using a hanger and track system. Cams and
locking pins ensure the mechanism remains in a secure, locked
position.
All Type SA-1 Searchlight Signals are available with either a

compound or stepped lens. The compound lens produces a
longer-range light beam without the need for additional power.
Outer roundels are available to spread or deflect the light beam
for installations where the track curves. A phankill can also be
supplied to minimize light beam dilution and prevent phantom
signals caused by sunlight. Type SA-1 Mast-Mounted High
Signals are available with either an operative or inoperative
mechanism. Optional mast assemblies are available complete
with pinnacle, base, ladder, ladder foundation and platform.
Type SA-1 Dwarf Signals use one or two mechanisms. Optional
equipment includes roundel and phankill assemblies, wire
entrance couplings, conduit and adjustable lamp resistors.
Specifications
Data
Overall length of signal, including hood

Overall height of signal (either lens system)
Lens bezel ring, overall diameter:
Weight of Signal housing and signal mechanism

Compound lens system: 34(86.36cm)

Stepped lens system: 29-3/4(75.57 cm)
27-7/8(70.80 cm)
10 (25.40 cm)
Stepped lens system: 140 lbs. (63.56 kg)
Compound lens system: 160 lbs. (72.74 kg)
Signal mechanism only: 25 lbs. (11.35 kg)
Signals
Value
149
Type SA-1
Searchlight Signal
77
44
771
080
1-
Durable Cast
Aluminum
Housing
Type SA-1
Searchlight Signal
Ordering Information - Type SA-1 Signal, High Signal Heads, with Mechanism
Type of Mechanism
Lens System
Aspect Color
Type of Wire Connection Ordering Number Price
Operating
Inoperative
Operating
Inoperative
Compound
Compound
Stepped
Stepped
GRY
R
GRY
R
Plug Coupler
AAR Terminals
Plug Coupler
AAR Terminals
A76-0114
A76-0115
A76-0118
A76-0119
$ 11,995.00
$ 6,995.00
$ 11,995.00
Call for price
Note 1: Type SA-1 Signals listed include signal housing with operating mechanism, hood, 35 diameter background,

8.375 diameter outer lens for tangent track, ventilators, and bracket for side-mounting on a 5 diameter mast.
Note 2: The following are NOT INCLUDED, please order separately: wire entrance coupling, lamp resistor, roundel,

phankill assembly, top or front mounting bracket, optional 20 diameter background.
Signals
Ordering Information - Type SA-1 Signal, High Signal Heads, without Mechanism
150
Type of Mechanism
Lens System
Aspect Color
Type of Wire Connection Ordering Number Price
(None)
(None)
Compound
Stepped
(None)
(None)
(None)
(None)
A76-0136
A76-0138
$ 3,500.00
$ 3,500.00
Note 1: A signal housing, less mechanism, includes a hood,35 diameter background, 8.375 diameter outer lens for tangent

track, ventilators, and brackets for side-mounting on a 5 diameter mast.
Note 2: A signal housing DOES NOT INCLUDE a wire entrance coupling. Please order separately.
CALL 800.717.4477 FAX 585.274.8777
Type SA-1
Searchlight Signal Parts

and Accessories
Type SA-1 DwarfSignal
Ordering Information - Type SA-1 Signal, Dwarf Signal Heads with Mechanism
Reference Units Type of Mechanism Lens System Aspect Color Type of Wire Connection Ordering Number Price
A
A1
B
B1
C
C1
D
1
1
1
Operating
Inoperative
Operating
Compound
Compound
Stepped
GRY
R
GRY
Plug Coupler
AAR Terminals
Plug Coupler
A76-0201
A76-0202
A76-0206
$ 11,995.00
$ 5,999.00
$ 10,995.00
1
2
2
2
Inoperative
Operating
Inoperative
Operating
Stepped
Compound
Compound
Stepped
R
GRY
R
GRY
AAR Terminals
Plug Coupler
AAR Terminals
Plug Coupler
A76-0207
A76-0211
A76-0212
A76-0216
Call for price

$ 22,995.00
Call for price
$ 20,995.00
Note : The dwarf signal includes the housing with operating or inoperative mechanism, hood, background, 8.375" diameter
V-inclined 10 upward deflecting roundel, ventilators, and base.
Note: The dwarf signal does NOT INCLUDE wire entrance coupling, lamp resistor, or Phankill assembly.
Please order separately.
Ordering Information - Type SA-1 Signal, Dwarf Signal Heads without Mechanism
Type of Mechanism
Compound
Stepped
Compound
Stepped
Aspect Color Number of Units

1
1
2
2
Note : The dwarf signal includes the hood.
Ordering Number Price

A76-0220
A76-0221
A76-0225
A76-0226
$ 3,500.00
$ 2,995.00
$ 5,995.00
$ 5,195.00
Signals
Lens System
151
Type SA-1
Searchlight Signal Parts

and Accessories
The operating mechanism may be supplied with
a compound or stepped lens system. These mechanisms come with a plug coupler for wire connections. The operating mechanism does NOT
INCLUDE a lamp or the lamp resistor.
The inoperative mechanism is available with a
compound or stepped lens system. This mechanism is supplied with standard AAR terminal posts
for wire connections. The inoperative mechanism
does NOT INCLUDE a lamp or the lamp resistor.
Operating Mechanism
for SA-1 Signal
VISIT
for all your signaling needs!
Signals
Ordering Information - Operating Mechanism
152
Lens System
Aspect Color
Ordering Number
Price
Compound
Stepped
GRY
GRY
59545-150-03
59545-100-02
$ 8,995.00
$ 8,995.00
Ordering Information - Inoperative Mechanism

Lens System
Aspect Color
Ordering Number
Price
Compound
Stepped
Red
Red
53052-339-05
53052-387-01
$ 3,599.00
$ 3,595.00
CALL 800.717.4477 FAX 585.274.8777
Roundel and Phankill

Assemblies
Roundel Assembly
Signal heads furnished with 8.375" (21.27 cm) diameter

lenses for tangent track only may be easily adapted for special conditions by adding a roundel or phankill assembly. The
phankill eliminates spread. This special optical equipment
comes ready-to-install except for sealing compound which
must be ordered separately. ALSTOM recommends soft mastic
sealing compound per ALSTOM specification 90B0010, available in a one pound plug of material.
Roundel assemblies fit both stepped and compound lens signals. Phankill assemblies for high signals have a built-in 25
close-up roundel. On compound lens high signals, remove
the existing close-up roundel before installing the phankill. A
phankill used with a stepped lens requires a separate order
for a signal head with clear center lens, which is specially
arranged for use with a phankill.
Ordering Number Price
ROUNDEL ASSEMBLY, inclined 20-degree deflecting, for compound or stepped lens high signals
ROUNDEL ASSEMBLY, 30-degree Spredlite, for compound or stepped lens high signals
PHANKILL ASSEMBLY, for compound or stepped lens high signal.
The inclined roundel is 30-degree Spredlite type
PHANKILL ASSEMBLY, for compound or stepped lens dwarf signal
PHANKILL UNIT, with 25-degree close-up prism, for high signals
PHANKILL COMP., for dwarf signals
A76-0350
A76-0353
$ 795.00
$ 1,563.00
A76-0363
A76-0370
56629-007-00
56629-006-01
$ 1,595.00
$ 795.00
$ 787.00
$ 313.00
Signals
Description
153

Alstom 12" LED Flashing Light Assembly

Uploaded by

Copyright:

Available Formats

Alstom 12" LED Flashing Light Assembly

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Alstom 12" LED Flashing Light Assembly

Uploaded by

Copyright:

Available Formats

Switch Products

AURORA LED Gate Arm Light

AURORA Complete Highway

AURORA Gate Arm Lights

AURORA 8, 12, 5.5 LEDs

Types AT and AW Color Light Signals

With more than 100 years of experience in signaling, Alstom

The AW and AT Color-Light signals are designed for use in

The SA-1 Searchlight signals have proven to be the standard

The AURORA line of LED signals includes highway crossing

CALL 800.717.4477 FAX 585.274.8777

AURORA Complete Highway

AURORA Highway Crossing Signals are ideal for

2009 Alstom Signaling Inc.

Signals with LEDs

The new Alstom Complete Highway Crossing Signals are

These truly versatile Highway Crossing Signals will drastically

CALL 800.717.4477 FAX 585.274.8777

Crossing Signals with LEDs

8 Inch with LED Module

2009 Alstom Signaling Inc.

Pole Size (inches)

AURORA 8" and 12"

AURORA 12 LED Highway Crossing Retrofit

Compatible with all standard

The AURORA 12" LED lamp unit measures 12 in diameter.

12-inch AURORA Highway Crossing Signal Retrofit Kit

CALL 800.717.4477 FAX 585.274.8777

AURORA 8" and 12"

AREMA Standard Class B

AURORA 160 (12 inch)

AURORA 300 (12 inch)

2009 Alstom Signaling Inc.

AURORA 5.5 LEDRetrofit

Available with Adjustable

Note: Indicators Only - Not Vital Signals

Ordering Number Configurator

Wide 30 Degree LED

High (110 Volt)

Specifications - Volt-Amps Consumed for 5.5" LED Signals

CALL 800.717.4477 FAX 585.274.8777

AURORA LED PL100

Robust, Heavy Duty Packaging

Designed with LEDs to be at

Long Life LED Technology

Available in Lunar White

Note: Indicators Only - Not Vital Signals

Operating Voltage Range

PL100 Bayonet-Style Position Light LED (Lunar White)

2009 Alstom Signaling Inc.

High Wind Guard

Complete Housing Assembly

(Includes hood, background, and housing

AURORA Highway Crossing Componets

Also available from Alstom are additional

High Wind Guard

CALL 800.717.4477 FAX 585.274.8777

Typical Mast Assemblies

Mast assemblies are available in any height required and can