SP Water Utilities Experiences 06242016

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

WATER UTILITIES CHOOSE

Fixed Wireless Broadband Communications

What these water utilities discovered is that there is a vast difference


between low-end commercial-grade equipment and purpose-built
technology platforms specifically designed for low total cost of ownership.
Kent Brown,
Director of Sales National and Strategic Accounts,
Cambium Networks

This Application Paper refers to actual field results from two utilities in the
southwestern United States:
A water utility serving a major city trusted with water supply, wastewater collection
and treatment, and reuse of water resources serving 1.6 million people
A river authority conservation and reclamation district that manages water resources
for a ten county district

Both of these organizations


have deployed wireless
broadband connectivity
solutions from Cambium
Networks. Due to the nature of
critical infrastructure security,
please contact Cambium
Networks for approved
customer reference information.
Challenges
Communications technology has a measurable and dramatic effect on the efficiency
and cost structure of all phases of water management:
Water supply and distribution
Hydro-electric generation
Water treatment
Storm water management

Strategic Goals:
Every water utility must maximize efficiency while being vigilant about compliance to
water quality and safety standards. The communications infrastructure strategy must
support these goals, and utilities must select the most appropriate communications
technology to meet their needs. In most cases, fiber may be cost effective at the core
or backbone of the network, but fiber or any wired technology can be economically
unfeasible to connect a large number of field locations. Fixed wireless is a proven and
legitimate solution that provides the reliability and throughput needed at a significant
cost advantage.
Once a utility decides to implement a wireless solution, the spectrum strategy must
be planned and decided. While licensed spectrum provides protected use of a radio
frequency, some parts of the operation may be in locations with little or no interference,
and free license-exempt spectrum is readily available. Along with the RF environment,
the utility needs to have a clear understanding of the coverage scale and applications
required in the network. With this information, a network can be modeled in detail,
and a business case can be developed.

Water Utilities Choose Fixed Wireless Broadband Communications

There are two key challenges to implementing a communications infrastructure:


1. Technology challenge: provide consistently reliable connectivity to support efficient
24/7 operations
2. Financial challenge: provide reliable connectivity at a lower total cost of ownership
than available alternatives

Applications:
While one set of applications may drive the initial decision to develop a private network,
an IP-based network can be leveraged across many applications.
SCADA the network can enable remote monitoring and control of facilities across the
entire field area network. These monitoring functions include but are not limited to:
Water flow, temperature, and pressure
Electricity generated
Alarm conditions and process control (APC)
Water gate controls
Valve controls
Sensors
Security the network can also provide live streaming video from hundreds of
cameras across the field area network to perform:
Perimeter and facility surveillance
Verification of water gates position and operation
Verification of alarm conditions prior to dispatching technicians
Analysis of obstructions in water flow conditions
Safety clearance verification before opening or closing gates
Both of these utilities had chosen wireless broadband years ago because of the
attractive return on investment (ROI) compared with leased lines. What they
eventually discovered was that while wireless broadband equipment complies with
industry protocol standards, communications technology is not a commodity
business. There is a vast difference between low-end commercial-grade equipment
and purpose-built technology designed for low total cost of ownership (TCO).
Their initial foray into wireless broadband did not achieve the savings projections.
While the initial cost of the equipment was dramatically less expensive than leased
lines, equipment failures and self-interference caused the network to underperform
and required unforeseen maintenance and repair costs.

Water Utilities Choose Fixed Wireless Broadband Communications

Wireless Broadband Solutions


At the core of the network, both the water utility and river authority chose
high-capacity Point-to-Point (PTP) links. One chose the security of operating in the
private 638 GHz licensed spectrum, and the other chose to use interference-tolerant
systems that optimized performance in the unlicensed 5 GHz spectrum. These PTP links
provided a ring architecture at the core and spokes that extend connectivity
to distant areas in the field area network.

PTP 820 LICENSED MICROWAVE INFRASTRUCTURE


Frequency

6L, 6H, 7, 8, 11, 13, 15, 18, 23, 26 GHz

Throughput

Up to 1.66 Gbps

Flexible Configuration

All-outdoor, all-indoor, or split-mount options

PTP 650 WIRELESS BACKHAUL INFRASTRUCTURE


Frequency

4.9 to 6.05 GHz

Throughput

Up to 450 Mbps in a 45 MHz channel

Award-Winning Performance

Highest Capacity in 20 and 40 MHz channel


Highest Spectral Efficiency in 20 and 40 MHz channel

Once the connectivity is brought to a distant part of the network, a Point-to-Multipoint


(PMP) distribution and access network spreads the connectivity to the individual
locations. This can be accomplished using the 3 GHz licensed frequencies, the 2.4 or
5 GHz unlicensed frequencies, or (as is the case with the water utility) the 4.9 GHz public
safety band. These connections provide the high throughput and low latency that enable
streaming video, voice, and SCADA data to be carried on one IP-based private network.
PMP 450 AND PMP 450I DISTRIBUTION AND ACCESS
Frequency

2.4, 3.5, 3.65, 4.95.9 GHz

Throughput

125 Mbps in a 20 MHz channel

Synchronization

GPS Synchronization

With the increasing number of WiFi devices used by water utility personnel and the
WiFi-enabled meters and technology embedded in the network, utilities can also deploy
WiFi Access Points (AP) to provide indoor and outdoor connectivity. This ensures that
technicians have immediate access to streaming video and information that they need to
perform their work efficiently.

cnPILOT E500 OUTDOOR WIFI ACCESS


Frequency

Nearly 100 Mbps in a 20 MHz channel

Concurrent Clients

256

cnPILOT R201P WIFI ROUTER


Frequency

2.4 and 5 GHz

Throughput

802.11ac access

Water Utilities Choose Fixed Wireless Broadband Communications

Results
While there are many wireless broadband alternatives, water utilities should be
mindful not to view wireless broadband as a commodity. A communications
infrastructure touches all components of the business and becomes the core on
which mission critical operations depend.

PREVIOUS WIRELESS SYSTEM


Applications

SCADA data

CAMBIUM NETWORKS
Streaming video
Voice
SCADA data

Radio
Performance

High hardware failure rates

Easy to bring up network

Numerous system outages

Consistent performance

Self-interference
Flexible
Configuration

Crowd sourced on Internet blogs

24/7 technical support


Consultations with technical experts
Online community
Crowd sourced on Internet blogs

Technical
Support

Removed from network

Extending network
Adding IP-based applications

Lessons Learned
Both utilities found wireless broadband equipment that met or exceeded their
performance expectations and delivered the projected cost savings. The key factors
used in their selection process included:
Mean Time Between Failures what is the calculated reliability of the equipment,
and does field experience bear out this calculation? This is significant because it
directly affects network availability and cost of maintenance.
Synchronization how does the network perform as more equipment is added?
Given the development of the Industrial Internet of Things (IIoT) and the
ever-increasing demand for bandwidth, it is a fair assumption that connectivity needs
will increase. The system should scale to accommodate new IP-based capabilities.
Network Planning how is the wireless network designed? Connecting a half
dozen locations is a simple task, but designing a scalable network over a vast
coverage area requires a communications strategy. Does the solution have
software tools and expert technical support to understand near-term needs
and strategic goals?

Water Utilities Choose Fixed Wireless Broadband Communications

Network Management what tools are available to manage the network?


Water utilities are not telecommunications service providers, and for some, it is a
significant step to own and operate a private communications network. Tools should
provide actionable information, quickly identify degradation and alarm conditions,
and make it easy to manage the end-to-end communications hardware and
software across the entire network.
Support what support is there when the network needs hardware or software
upgrades or has problems? A water utility is a 24/7 operation that vitally affects
large populations. The communications network must function at peak performance
at all times.
Water utilities require communications solutions that fully support their mission of
providing consistently high-quality services. While operating a private network may
be a new endeavor for utilities, just as they do for other technology partners, they
should seek out a partner that provides them confidence.

Cambium Networks and the stylized circular logo are trademarks of Cambium Networks, Ltd.
All other trademarks are the property of their respective owners.
Copyright 2016 Cambium Networks, Ltd. All rights reserved.
06/2016

Water Utilities Choose Fixed Wireless Broadband Communications

You might also like