Scribd Logo
Upload

Welcome to Scribd!

  • 292 views

    Transfer Pump Calculations - A Type

    Uploaded by

    Bala Krishna Galla
    The document contains pump head calculations for 5 different types of transfer pumps (A, B, C, D, E). For each type, it summarizes the flow rate, time to fill the tank, total head requirements including static head, friction head losses, and required pressure at the roof. The final working pressure requirement ranges from 2.0 to 2.5 bars depending on the pump type and pipe configuration. Flow rates vary between 1.0 to 2.0 liters per second and fill times range from 31 to 47 minutes.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Transfer Pump Calculations - A Type

    Uploaded by

    Bala Krishna Galla
    292 views20 pages
    The document contains pump head calculations for 5 different types of transfer pumps (A, B, C, D, E). For each type, it summarizes the flow rate, time to fill the tank, total head requirements including static head, friction head losses, and required pressure at the roof. The final working pressure requirement ranges from 2.0 to 2.5 bars depending on the pump type and pipe configuration. Flow rates vary between 1.0 to 2.0 liters per second and fill times range from 31 to 47 minutes.

    Original Description:

    DFD

    Original Title

    Pump calc

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains pump head calculations for 5 different types of transfer pumps (A, B, C, D, E). For each type, it summarizes the flow rate, time to fill the tank, total head requirements including static head, friction head losses, and required pressure at the roof. The final working pressure requirement ranges from 2.0 to 2.5 bars depending on the pump type and pipe configuration. Flow rates vary between 1.0 to 2.0 liters per second and fill times range from 31 to 47 minutes.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    292 views20 pages

    Transfer Pump Calculations - A Type

    Uploaded by

    Bala Krishna Galla
    The document contains pump head calculations for 5 different types of transfer pumps (A, B, C, D, E). For each type, it summarizes the flow rate, time to fill the tank, total head requirements including static head, friction head losses, and required pressure at the roof. The final working pressure requirement ranges from 2.0 to 2.5 bars depending on the pump type and pipe configuration. Flow rates vary between 1.0 to 2.0 liters per second and fill times range from 31 to 47 minutes.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 20

    Transfer Pump Calculations - A type

    Sl. No
    1

    Decription
    Pump Flow calculation
    Roof water tank size

    2
    x
    560
    (1 Ltr per sec = 15.85 US galons per min)
    Flow rate
    2 Lts
    Time reqquired to fill 1120 Gallons
    Summary
    Flow
    Time
    2

    =
    =

    2.0 Lts per sec


    35 mins

    Pump Head Calculation


    Description
    Height of the building
    Id 40 dia PPR
    Id 40 dia T bend
    NRV
    Id 40 dia PPR
    NRV
    Id 40 dia 90 bend
    Id 40 dia PPR
    Id 40 dia 90 bend
    Id 40 dia PPR
    Id 40 dia 90 bend
    Id 40 dia 90 bend
    Id 40 dia PPR
    Id 40 dia 90 bend
    Id 40 dia PPR
    Id 40 dia 90 bend
    Id 40 dia PPR
    Id 40 dia 90 bend
    Id 40 dia PPR
    Id 40 dia 90 bend
    Id 40 dia PPR
    Id 40 dia 90 bend
    Gate Valves
    Sockets
    Total

    1120.00
    15.85
    31.70
    35.33

    Total Head

    Length
    7
    0.3
    1
    1
    0.3
    1
    1
    0.74
    1
    0.45
    1
    1
    0.8
    1
    7.2
    1
    0.86
    1
    2.6
    1
    2.5
    1
    2
    5

    Static Head (height of Building)


    Friction Head
    Friction Head losses
    Pressure required at roof
    Static Head

    Eq. Length
    7
    0.3
    0.3
    0.5
    0.3
    0.5
    0.5
    0.74
    0.5
    0.45
    0.5
    0.5
    0.8
    0.5
    7.2
    0.5
    0.86
    0.5
    2.6
    0.5
    2.5
    0.5
    1
    1
    23.55 meters

    Static head + Friction Head + Pressure required

    = 7.0 meters
    = 3.28/100 x friction head loss (feet / 100 feet of pipe)
    x total equivalent length of pipe
    = 4.58 (feet / 100 feets)
    = 1 bar (1 bar = 10 mts)
    7.00 Mtrs

    Friction Head
    Pressure required
    Safety Factor
    4

    3.54 Mtrs
    10.00 Mtrs
    20.54 Mts
    22.59 Mts

    Final Summary
    Working Presssure requirement
    Flow
    Time

    (2.1 Bar)
    (2.3 Bar)

    2.5 Bar
    1.5 Lts / sec
    47 mins

    Calculations - A type

    US gallons
    US gallons per min
    mins

    + Friction Head + Pressure required at roof

    riction head loss (feet / 100 feet of pipe)

    Transfer Pump Calculations - B type


    Sl. No
    1

    Decription
    Pump Flow calculation
    Roof water tank size

    2
    x
    500
    (1 Ltr per sec = 15.85 US galons per min)
    Flow of water
    (2 Ltr per sec As per design Dwgs)
    Time reqquired to fill 1000 Gallons
    Summary
    Flow
    Time
    2

    =
    =

    2.0 Lts per sec


    32 Mins

    Pump Head Calculation


    Description
    Height of the building
    Id 40 dia PPR
    Id 40 dia T bend
    NRV
    Id 40 dia PPR
    NRV
    Id 40 dia 90 bend
    Id 40 dia PPR
    Id 40 dia 90 bend
    Id 40 dia PPR
    Id 40 dia PPR
    Id 40 dia 90 bend
    Id 40 dia PPR
    Id 40 dia 90 bend
    Id 40 dia 90 bend
    Id 40 dia PPR
    Id 40 dia 90 bend
    Id 40 dia PPR
    Id 40 dia 90 bend
    Gate Valves
    Sockets
    Total

    1000.00
    15.85
    31.70
    31.55

    Total Head

    Length
    7
    0.3
    1
    1
    0.3
    1
    1
    0.74
    1
    0.45
    0.8
    1
    7.2
    1
    1
    2.6
    1
    2.5
    1
    2
    5

    Static Head (height of Building)


    Friction Head
    Friction Head losses
    Pressure required at roof
    Static Head
    Friction Head
    Pressure required

    Eq. Length
    7
    0.3
    0.3
    0.5
    0.3
    0.5
    0.5
    0.74
    0.5
    0.45
    0.8
    0.5
    7.2
    0.5
    0.5
    2.6
    0.5
    2.5
    0.5
    1
    1
    21.69 meters

    Static head + Friction Head + Pressure required

    = 7.5 meters
    = 3.28/100 x friction head loss (feet / 100 feet of pipe)
    x total equivalent length of pipe
    = 4.58 (feet / 100 feets)
    = 1 bar (1 bar = 10 mts)
    7.00 Mtrs
    3.26 Mtrs
    10.00 Mtrs
    20.26 Mts

    (2.0 Bar)

    Safety Factor
    4

    22.28 Mts

    Final Summary
    Working Presssure requirement
    Flow
    Time

    (2.3 Bar)

    2.5 Bar
    2.0 Lts / sec
    32 mins

    Calculations - B type

    US gallons
    US gallons per min
    US gallons per min
    mins

    + Friction Head + Pressure required at roof

    riction head loss (feet / 100 feet of pipe)

    Transfer Pump Calculations - C type


    Sl. No
    1

    Decription
    Pump Flow calculation
    Roof water tank size

    2
    x
    400
    (1 Ltr per sec = 15.85 US galons per min)
    Flow of water
    (1.5 Ltr per sec As per design Dwgs)
    Time reqquired to fill 800 Gallons
    Summary
    Flow
    Time
    2

    =
    =

    Total Head

    Length
    6.5
    0.3
    1
    1
    0.3
    1
    1
    0.45
    1
    1
    0.86
    1
    2.6
    1
    2.5
    1
    2
    5

    Static Head (height of Building)


    Friction Head
    Friction Head losses
    Pressure required at roof
    Static Head
    Friction Head
    Pressure required at roof
    Safety Factor
    4

    1.5 Lts per sec


    34 Mins

    Pump Head Calculation


    Description
    Height of the building
    Id 32 dia PPR
    Id 32 dia T bend
    NRV
    Id 32 dia PPR
    NRV
    Id 32 dia 90 bend
    Id 32 dia PPR
    Id 32 dia 90 bend
    Id 32 dia 90 bend
    Id 32 dia PPR
    Id 32 dia 90 bend
    Id 32 dia PPR
    Id 32 dia 90 bend
    Id 32 dia PPR
    Id 32 dia 90 bend
    Gate Valves
    Sockets
    Total

    800.00
    15.85
    23.78
    33.65

    Final Summary

    Eq. Length
    6.5
    0.3
    0.3
    0.5
    0.3
    0.5
    0.5
    0.45
    0.5
    0.5
    0.86
    0.5
    2.6
    0.5
    2.5
    0.5
    1
    2.5
    14.81 meters

    Static head + Friction Head + Pressure require


    = 6.5 meters
    = 3.28/100 x friction head loss (feet / 100 feet of pipe)
    x total equivalent length of pipe
    = 4.58 (feet / 100 feets)
    = 1 bar (1 bar = 10 mts)
    6.50 Mtrs
    2.22 Mtrs
    10.00 Mtrs
    18.72 Mts
    20.60 Mts

    (1.9 Bar)
    (2.0 Bar)

    Working Presssure requirement


    Flow
    Time

    2.0 Bar
    1.5 Lts / sec
    34 mins

    alculations - C type

    US gallons
    US gallons per min
    US gallons per min
    mins

    + Friction Head + Pressure required at roof

    n head loss (feet / 100 feet of pipe)

    Transfer Pump Calculations - D type


    Sl. No
    1

    Decription
    Pump Flow calculation
    Roof water tank size

    2
    x
    275
    (1 Ltr per sec = 15.85 US galons per min)
    Flow of water
    (1.0 Ltr per sec As per design Dwgs)
    Time reqquired to fill 550 Gallons
    Summary
    Flow
    Time
    2

    =
    =

    1.0 Lts per sec


    35 mins

    Pump Head Calculation


    Description
    Height of the building
    Id 32 dia PPR
    Id 32 dia T bend
    NRV
    Id 32 dia PPR
    NRV
    Id 32 dia 90 bend
    Id 32 dia PPR
    Id 32 dia 90 bend
    Id 32 dia PPR
    Id 32 dia 90 bend
    Id 32 dia 90 bend
    Id 32 dia PPR
    Id 32 dia 90 bend
    Id 32 dia PPR
    Id 32 dia 90 bend
    Id 32 dia PPR
    Id 32 dia 90 bend
    Gate Valves
    Sockets
    Total

    550.00
    15.85
    15.85
    34.70

    Total Head

    Length
    6
    0.3
    1
    1
    0.3
    1
    1
    0.74
    1
    0.45
    1
    1
    0.8
    1
    0.86
    1
    2.5
    1
    2
    5

    Static Head (height of Building)


    Friction Head
    Friction Head losses
    Pressure required at roof
    Static Head
    Friction Head
    Pressure required
    Safety Factor

    Eq. Length
    6
    0.3
    0.3
    0.5
    0.3
    0.5
    0.5
    0.74
    0.5
    0.45
    0.5
    0.5
    0.8
    0.5
    0.86
    0.5
    2.5
    0.5
    1
    2.5
    14.25 meters

    Static head + Friction Head + Pressure required

    = 6.0 meters
    = 3.28/100 x friction head loss (feet / 100 feet of pipe)
    x total equivalent length of pipe
    = 4.58 (feet / 100 feets)
    = 1 bar (1 bar = 10 mts)
    6.00 Mtrs
    2.14 Mtrs
    10.00 Mtrs
    18.14 Mts
    19.95 Mts

    (1.8 Bar)
    (2.0 Bar)

    Final Summary
    Working Presssure requirement
    Flow
    Time

    2.0 Bar
    1.0 Lts / sec
    35 mins

    Calculations - D type

    US gallons
    US gallons per min
    US gallons per min
    mins

    + Friction Head + Pressure required at roof

    riction head loss (feet / 100 feet of pipe)

    Transfer Pump Calculations - E type


    Sl. No
    1

    Decription
    Pump Flow calculation
    Roof water tank size

    2
    x
    275
    (1 Ltr per sec = 15.85 US galons per min)
    Flow of water
    (1.0 Ltr per sec As per design Dwgs)
    Time reqquired to fill 550 Gallons
    Summary
    Flow
    Time
    2

    =
    =

    1.0 Lts per sec


    35 mins

    Pump Head Calculation


    Description
    Height of the building
    Id 32 dia PPR
    Id 32 dia T bend
    NRV
    Id 32 dia PPR
    NRV
    Id 32 dia 90 bend
    Id 32 dia PPR
    Id 32 dia 90 bend
    Id 32 dia PPR
    Id 32 dia 90 bend
    Id 32 dia 90 bend
    Id 32 dia PPR
    Id 32 dia 90 bend
    Id 32 dia PPR
    Id 32 dia 90 bend
    Id 32 dia PPR
    Id 32 dia 90 bend
    Gate Valves
    Sockets
    Total

    550.00
    15.85
    15.85
    34.70

    Total Head

    Length
    6
    0.3
    1
    1
    0.3
    1
    1
    0.74
    1
    0.45
    1
    1
    0.8
    1
    0.86
    1
    2.5
    1
    2
    5

    Static Head (height of Building)


    Friction Head
    Friction Head losses
    Pressure required at roof
    Static Head
    Friction Head
    Pressure required
    Safety Factor

    Eq. Length
    6
    0.3
    0.3
    0.5
    0.3
    0.5
    0.5
    0.74
    0.5
    0.45
    0.5
    0.5
    0.8
    0.5
    0.86
    0.5
    2.5
    0.5
    1
    2.5
    14.25 meters

    Static head + Friction Head + Pressure required

    = 6.0 meters
    = 3.28/100 x friction head loss (feet / 100 feet of pipe)
    x total equivalent length of pipe
    = 4.58 (feet / 100 feets)
    = 1 bar (1 bar = 10 mts)
    6.00 Mtrs
    2.14 Mtrs
    10.00 Mtrs
    18.14 Mts
    19.95 Mts

    (1.8 Bar)
    (2.0 Bar)

    Final Summary
    Working Presssure requirement
    Flow
    Time

    2.0 Bar
    1.0 Lts / sec
    35 mins

    Calculations - E type

    US gallons
    US gallons per min
    US gallons per min
    mins

    + Friction Head + Pressure required at roof

    riction head loss (feet / 100 feet of pipe)

    You might also like