FLYWHEEL HORSEPOWER

Gross: 194 kW 260 HP @ 1950 rpm

Net: 184 kW 246 HP @ 1950 rpm

STANDARD EQUIPMENT

Alternator, 60 Ampere, 24V

Auto-decel
Automatic engine warm-up system
Batteries, 126 Ah/2 x 12V
Boom holding valve
ROPS cab (ISO 12117-2)
Corrosion resistor
Counterweight
Dry type air cleaner, double element
Electric horn
Engine, Komatsu SAA6D114E-3
Engine overheat prevention system
Fan guard structure

Hydraulic track adjusters (each side)

Long lubricating intervals for implement
bushings
Multi-function color monitor
Power maximizing system
PPC hydraulic control system
Radiator & oil cooler dust proof net
Rear reflector
Rear view mirror, RH, LH, rear,
sidewise
Seat belt, retractable
Starting motor, 7.5 kW/24 v x 1
Suction fan

Track roller guards (full length)

Track roller
PC350-8, 7 each side
PC350LC-8, 8 each side
Track shoe
PC350-8, 600 mm 24" triple grouser
PC350LC-8, 600 mm 24" triple grouser
Travel alarm
Two-mode settings for boom
Working light, 2 (boom and RH)
Working mode selection system

PC350-8
PC350LC-8

OPERATING WEIGHT
PC350-8: 32600 32960 kg
71,870 72,660 lb
PC350LC-8: 33660 34040 kg
74,210 75,040 lb

PC

350
OPTIONAL EQUIPMENT
Cab accessories
Rain visor
Sun visor
Cab front guard
Full height guard
Half height guard
Cab with 2-piece pull up front window
Heater with defroster

Rear view monitoring system

Seat, suspension
Seat, suspension with heater
Service valve
Track frame undercover
Working lights, 2 on cab

SPECIAL PURPOSE BUCKET

Ripper bucket for hard and rock ground
Capacity
SAE heaped 0.9 m3 1.18 yd3
CECE heaped 0.8 m3 1.05 yd3
Width 1200 mm 47.2"

www.Komatsu.com

Printed in Japan 201201 IP.As

Photo may include optional equipment.

CEN00222-03

Materials and specifications are subject to change without notice.

is a trademark of Komatsu Ltd. Japan.

HYDRAULIC EXCAVATOR

Additional filter system for poor-quality fuel

Air conditioner with defroster
Arm, 3185 mm 10'5" arm assembly,
heavy-duty
Batteries, 140 Ah/2 x 12 V
Bolt-on top guard (Operator Protective
Guards level 2 (OPG))
Boom, 6470 mm 21'3", heavy-duty

PC350-8

H Y D R A U L I C E X C AVAT O R

HYDRAULIC EXCAVATOR

WALK-AROUND

HORSEPOWER
Gross: 194 kW 260 HP @ 1950 rpm
Net: 184 kW 246 HP @ 1950 rpm

Ecology and Economy Features

OPERATING WEIGHT
PC350-8: 32600 32960 kg
71,870 72,660 lb
PC350LC-8: 33660 34040 kg
74,210 75,040 lb

Low emission engine

A powerful turbocharged and air to air aftercooled Komatsu SAA6D114E-3
engine provides 184 kW 246 HP. This engine is EPA Tier 3 and EU Stage 3A
emissions certified, without sacrificing power or machine productivity.

Productivity Features
High Production and
Low Fuel Consumption

BUCKET CAPACITY
1.4 m3
1.83 yd3

Economy mode saves fuel consumption.

High power, working performance

and fuel efficiency improve
production and fuel costs.

Low operation noise

See pages 4 and 5.

Large Comfortable Cab

Large Drawbar Pull

Low-noise cab
Low vibration with cab damper mounting

provides superb steering and slope

climbing performance.

Highly pressurized cab with optional air conditioner

Heavy-duty Boom

Large Digging Force

Pressing the Power Max function
button temporarily increases the
digging force 7%.

PC350-8 0

Operator seat and console with armrest that enables

operations in the appropriate operational posture.
See page 6.

Heavy-duty Arm

Two-mode Setting for Boom

Easy Maintenance

Switch selection allows either

powerful digging or smooth boom
operation.
See page 5.

Long replacement interval of engine oil,

engine oil filter, hydraulic oil and
hydraulic filter.

Quarry Cab and

Additional Working Light
(optional)

Equipped with fuel pre-filter as standard

(with water separator)
Side-by-side radiator and oil cooler
configuration enables independent
removal and installation of those two
components.
Equipped with the EMMS monitoring
system.

Large TFT LCD Monitor

Easy-to-see and use 7" large
multi-function color monitor
Can be displayed in 12 languages for
global support.

Easy access to engine oil filter and fuel

drain valve
Large fuel tank capacity
See page 9.

Large Counterweight

TFT : Thin Film Transistor

LCD : Liquid Crystal Display

See page 8.

Safety Design
ROPS cab (ISO 12117-2)

Quarry Bucket

Full Roller Guards and

Double-flange Track Roller

Anti-slip plates for safe work on machine

Safety enhancement with large side-view, sidewise, and rear mirrors added.
Rear view monitoring system for easy checking behind the machine (optional)

Photo may include optional equipment.

See page 7.
2

PC350-8

H Y D R A U L I C E X C AVAT O R

PC350-8 0

HYDRAULIC EXCAVATOR

PRODUCTIVITY & ECOLOGY FEATURES

Komatsu Technology

Working Modes Selectable

Seven-inch TFT
liquid crystal display

Two established work modes are further improved.

Larger maximum draw-

P mode Power or

Hydraulic control valve

bar pull provides superb

work priority mode has

steering and slope

low fuel consumption,

climbing performance.

but fast equipment

Hydraulic system
controller

Larger Maximum
Drawbar Pull

Maximum drawbar pull:

speed and maximum

264 kN 26900 kgf

production and power

59,300 lb

are maintained.
Main pump

E mode Economy or
fuel priority mode
further reduces fuel

E
P

  

E mode

Large Digging Force

   


With the one-touch Power Max. function digging force has

P mode

Komatsu develops and produces all major

consumption, but

components, such as engines, electronics

maintains the P-mode-like working equipment speed for light

and hydraulic components, in house.

duty work.

With this Komatsu Technology, and adding

operation on the monitor panel depending on workloads.

great advancements in technology.

171 kN (17.4t)
(with Power Max.)

7% UP

Maximum bucket digging force (ISO):

213 kN (21.7t)

228 kN (23.2t)

7% UP

(with Power Max.)

To achieve both high levels of productivity

and economical performance, Komatsu has

Maximum arm crowd force (ISO):

160 kN (16.3t)

You can select Power or Economy modes using a one-touch

customer feedback, Komatsu is achieving

been further increased. (8.5 seconds of operation)

Eco-gauge that Assists Energy-saving Operations

Electronic control
unit for engine

developed the main components with a total

control system. The result is a new generation of high performance and environment
friendly excavators.

Environment-friendly Clean Engine

The PC350-8 gets its exceptional power and work capacity

Engine
Heavy duty HPCR (High Pressure
Common Rail) system

Equipped with the Eco-gauge that can be recognized at a

glance on the right of the multi-function color monitor for

Smooth Loading Operation

environment-friendly

Two return hoses improve

energy-saving opera-

hydraulic performance. In the arm

tions. Allows focus on

out function, a portion of the oil is

operation in the green

returned directly to the tank

range with reduced CO2

providing smooth operation.

emissions and efficient

Eco-gauge

246 HP, providing increased hydraulic power and improved

Komatsu SAA6D114E-3 engine is EPA Tier 3 and EU

Idling Caution

Stage 3A emissions certified and reduced NOx emission

To prevent unnecessary

by 40%.

fuel consumption, an idling

The SAA6D114E-3 engine adopts the electronically con-

caution is displayed on the

trolled Heavy Duty HPCR* fuel injection system.

monitor, if the engine idles

*HPCR : High Pressure Common Rail

for 5 minutes or more.

Hydraulics
Unique two-pump system ensures smooth compound
movement of the work equipment. HydrauMind controls

Return hoses

Two-mode Setting for Boom

fuel consumption.

from a Komatsu SAA6D114E-3 engine. Output is 184 kW

fuel efficiency.

*Measured with Power Max function, 3185 mm 10'5" arm and ISO rating

Smooth mode provides easy operation for gathering blasted

rock or scraping down operation. When maximum digging
force is needed, switch to Power mode for more effective
excavating.
Smooth mode

Boom floats upward, reducing

lifting of machine front. This
facilitates gathering blasted rock
and scraping down operations.

Power mode

Boom pushing force is

increased, ditch digging and
box digging operation on hard
ground are improved.

both pumps for efficient engine power use. This system

also reduces hydraulic loss during operation.

Low Operation Noise

Enables a low noise operation using the low-noise engine
and methods to cut noise at source. Ambient noise meets
the EU Stage 2 noise regulation.
4

PC350-8

H Y D R A U L I C E X C AVAT O R

HYDRAULIC EXCAVATOR

PC350-8 0

WORKING ENVIRONMENT
Safety Features
ROPS Cab

Lock Lever

The machine is equipped with a ROPS cab that conforms to

Locks the hydraulic

ISO 12117-2 for excavators as standard equipment. The

pressure to prevent

ROPS cab has high shock-absorption performance, featuring

unintentional move-

excellent durability and impact strength. It also satisfies the

ment. Neutral start

requirements of ISO OPG top guard level 1 for falling

function allows

objects. Combined with the retractable seat belt, The ROPS

machine to be started

cab protects the operator in case of tipping over and against

only in lock position.

falling objects.

Large Side-view, Rear, and

Sidewise Mirrors
Enlarged left-side mirror and addition of
rear and side mirror allow the PC350-8
to meet the new ISO visibility requirements.

Low Cab Noise

Wide Newly-designed Cab

The newly-designed cab is highly rigid

Newly-designed wide spacious cab

Automatic Air Conditioner

(optional)

and has excellent sound absorption

includes seat with reclining backrest.

Enables you

Pump/engine Room Partition

ability. Thorough improvement of noise

The seat height and longitudinal incli-

to easily and

Pump/engine room partition prevents oil from spraying onto

source reduction and use of low noise

nation are easily adjusted using a pull-

precisely set

the engine if a hydraulic hose should burst.

engine, hydraulic equipment, and air

up lever. You can set the appropriate

cab atmos-

conditioner allows this machine to

operational posture of armrest together

phere with

Thermal and Fan Guards

generate a low level of noise.

with the console.

the instru-

Thermal and fan

Reclining the seat further enables you

ments on the large LCD.

guards are placed

to place it into the fully flat state with

The bi-level control function keeps the

around high-temper-

the headrest attached.

operator's head and feet cool and

ature parts of the

PC350-8 uses viscous damper mount-

warm respectively. This improved air

engine and fan

ing for cab that incorporates longer

flow function keeps the inside of the

drive.

stroke and the addition of a spring.

cab comfortable throughout the year.

The new cab damper mounting

Defroster function keeps front glass

combined with high rigidity deck aids

clear.

Low Vibration with Cab Damper

Mounting

vibration reduction at operator seat.

Anti-slip Plates
Highly durable antislip plates maintain
superior traction
performance for the

Rubber
Spring
Silicon
Oil

Pressurized Cab

long term.

Optional air conditioner, air filter and a

higher internal air pressure (+9.0 mm
Aq +0.35"Aq) prevent external dust
from entering the cab.

PC350-8

H Y D R A U L I C E X C AVAT O R

PC350-8 0

HYDRAULIC EXCAVATOR

MAINTENANCE FEATURES
Large LCD Color Monitor

Easy Maintenance

Large Multi-lingual LCD Monitor

Easy Radiator Cleaning

Since radiator and oil cooler are

Easy Access to Engine Oil Filter

and Fuel Drain Valve

Long Work Equipment Greasing

Interval

arranged side-by-side, it is easy to

Engine oil level gauge, and fuel filter

High quality BMRC bushings and resin

clean, remove and install them.

are one side mounted to improve

shims are optionally available for work

accessibility. Engine oil filter and fuel

equipment pins excluding bucket,

can easily be read at various angles and

drain valve are remotely mounted to

extending greasing interval to 500

lighting conditions. Simple and easy to

improve accessibility.

hours.

A large user-friendly color monitor

1

enables safe, accurate and smooth work.

Improved screen visibility is achieved by

7

the use of TFT liquid crystal display that

operate switches. Function keys facilitate

Equipped with the

Fuel Pre-filter
(with Water Separator)

multi-function operations.
Displays data in 12 languages to globally
support operators around the world.

Removes water and

Basic
operation
switches

Indicators
1

Auto-decelerator

Working mode

3 Travel speed
4 Engine water
temperature gauge

Function
switches
4

Equipped with the Eco-drain

Valve as Standard

contaminants in the

Prevents clothes and the ground from

problems.

fuel to prevent fuel

becoming contaminated due to oil

Long-life Oil, Filter

leakage when replacing the engine oil.

Uses high-performance

5 Hydraulic oil temperature gauge

6 Fuel gauge
7 Eco-gauge

Air conditioner
operation
switches

8 Function switches menu

Basic operation switches

High-capacity Air Cleaner

filtering materials and

High capacity air cleaner is compara-

long-life oil. Extends the

ble to that of larger machines. The

oil and filter replacement

larger air cleaner can extend air clean-

interval.

er life during long-term operation and

Engine Oil Filter

Hydraulic oil filter

(Eco-white element)

Fuel Drain Valve

1 Auto-decelerator
2 Working mode selector

4 Buzzer cancel
5 Wiper

prevents early

3 Traveling selector

6 Windshield washer

clogging and

Engine oil &

Engine oil filter

resulting power

Hydraulic oil

decrease.

Hydraulic oil filter

Mode Selection

Reliability is

The multi-function color monitor has Power mode, Economy

EMMS
(Equipment Management Monitoring System)

mode, Lifting mode, Breaker mode and Attachment mode.

Monitor Function

new seal design.

Controller monitors engine oil

Large Fuel Tank Capacity

Working Mode

Application

Advantage

Power mode

Maximum production/power
Fast cycle time

Economy mode

Excellent fuel economy

Lifting mode

Hydraulic pressure is
increased by 7%

Breaker
operation

Optimum engine rpm,

hydraulic flow

ATT

Attachment
mode

Optimum engine rpm,

hydraulic flow, 2 way

level, coolant temperature, battery charge and air clogging,

etc. If controller finds any
abnormality, it is displayed on
the LCD.

500 hours
every 5000 hours
every 1000 hours
every

improved by a

Large fuel tank capacity extends operating hours before refueling. Fuel tank
is treated for rust prevention and
improved corrosion
resistance.

Maintenance Function
Monitor informs replacement
time of oil and filters on LCD

Lifting Mode

when the replacement interval

is reached.

When the Lifting mode is selected, lifting capacity is

increased 7% by raising hydraulic pressure.

Trouble Data Memory

Function
Monitor stores abnormalities for

effective troubleshooting.

Photo may include

optional equipment.

PC350-8

H Y D R A U L I C E X C AVAT O R

QUARRY HYDRAULIC EXCAVATOR

The PC350-8 is a specially designed heavy-duty machine. The PC350-8 has

Fixed Skylight and Sunshade

strengthened work equipment and various machine body parts for use in severe

ENGINE

job sites such as quarry and gravel gathering, etc.

Fixed One-piece
Laminated Front
Window Glass
The front window is
fixed and uses laminated safety glass to
prevent scattering of
glass fragments when
broken.

Cab with Two-piece

Pull-up Window
(optional)

Photo may include optional

equipment.

SPECIFICATIONS

Large Counterweight
The PC350-8 counterweight is increased by
900 kg 1,980 lb for better stability.

Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA6D114E-3

Type . . . . . . . . . . . . . . . . . . . . Water-cooled, 4-cycle, direct injection
Aspiration. . . . . . . . . . . . . . . . . . . . . . . . . Turbocharged, aftercooled
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 mm 4.49"
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 mm 5.31"
Piston displacement. . . . . . . . . . . . . . . . . . . . . . . . . . 8.27 ltr 505 in3
Horsepower:
SAE J1995 . . . . . . . . . . . . . . . . . . . . . . . . Gross 194 kW 260 HP
ISO 9249 / SAE J1349 . . . . . . . . . . . . . . . . . Net 184 kW 246 HP
Rated rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1950 rpm

Drive method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic

Swing reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Planetary gear
Swing circle lubrication . . . . . . . . . . . . . . . . . . . . . . . Grease-bathed
Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
Holding brake/Swing lock . . . . . . . . . . . . . . . . Mechanical disc brake
Swing speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.5 rpm

Fan drive type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical

Governor . . . . . . . . . . . . . . . . . . . . . . . . All-speed control, electronic

Center frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-frame

Track frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box-section
Seal of track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sealed track
Track adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic
Number of shoes (each side):
PC350-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
PC350LC-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Number of carrier rollers . . . . . . . . . . . . . . . . . . . . . . . . . 2 each side
Number of track rollers (each side):
PC350-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PC350LC-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

EPA Tier 3 and EU Stage 3A emissions certified.

HYDRAULICS
Deck Guard
Heavy-duty Boom

Heavy-duty
Arm
Strengthened Revolving
Frame Undercover

Dent Preventing
Plates

Photo may include optional equipment.

Side Shrouds

10

O-ring Added
O-ring is added between
bucket and linkage to prevent
entrance of dirt.

Bottom Wear Plate

19 mm 0.75 thickness hightensile strength steel used.

Corner Tooth
Adapters

Long Life
Bucket
Teeth

DRIVES AND BRAKES

Double-flange Track Roller

Lip
Shrouds

Type . . HydrauMind (Hydraulic Mechanical Intelligence New Design)

system, closed-center system with load sensing valves and
pressure compensated valves
Number of selectable working modes . . . . . . . . . . . . . . . . . . . . . . . 4
Main pump:
Type . . . . . . . . . . . . . . . . . Two-variable displacement piston type
Pumps for . . . . . . . . Boom, arm, bucket, swing, and travel circuits
Maximum flow . . . . . . . . . . . . . . . . . 535 ltr/min 141 U.S. gal/min
Supply for control circuit . . . . . . . . . . . . . . . . . Self-reducing valve
Hydraulic motors:
Travel . . . . . . . . . . . . . . 2 x axial piston motors with parking brake
Swing . . . . . . . . . . 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits . . . . . . . . . . . . 37.3 MPa 380 kgf/cm2 5,400 psi
Travel circuit . . . . . . . . . . . . . . . . 37.3 MPa 380 kgf/cm2 5,400 psi
Swing circuit . . . . . . . . . . . . . . . . 27.9 MPa 285 kgf/cm2 4,050 psi
Pilot circuit . . . . . . . . . . . . . . . . . . . . . 3.2 MPa 33 kgf/cm2 470 psi
Hydraulic cylinders:
(Number of cylinders bore x stroke x rod diameter)
Boom . . . . . 2 140 mm x 1480 mm x 100 mm 5.5" x 58.3" x 3.9"
Arm . . . . . . 1 160 mm x 1825 mm x 110 mm 6.3" x 71.9" x 4.3"
Bucket:. . . . 1 140 mm x 1285 mm x 100 mm 5.5" x 50.6" x 3.9"

UNDERCARRIAGE

COOLANT AND LUBRICANT

CAPACITY

(REFILLING)

Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605 ltr 160 U.S. gal

Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.0 ltr 8.5 U.S. gal
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.0 ltr 9.2 U.S. gal
Final drive, each side . . . . . . . . . . . . . . . . . . . . . . 9.0 ltr 2.4 U.S. gal
Swing drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.5 ltr 4.4 U.S. gal
Hydraulic tank . . . . . . . . . . . . . . . . . . . . . . . . . . 188 ltr 49.7 U.S. gal

OPERATING WEIGHT

(APPROXIMATE)

Operating weight including 6470 mm 21'3" one-piece boom,

3185 mm 10'5" arm, SAE heaped 1.4 m3 1.83 yd3 bucket, rated
capacity of lubricants, coolant, full fuel tank, operator, and standard
equipment.

Full Roller Guard

Quarry Bucket and Work Equipment

PC350-8 bucket is designed exclusively for quarry use and is higher strength
for impact and wear. Various parts of work equipment are also strengthened.

Side Reinforcement Plates

16 mm 0.63 thickness hightensile strength steel used.

SWING SYSTEM

Double-flange roller guides track link correctly

and extends life of undercarriage.
Number of double-flange track rollers
PC350-8 . . . . . . . . . . . .3 each side
PC350LC-8 . . . . . . . . .4 each side

Steering control . . . . . . . . . . . . . . . . . . . . . . . Two levers with pedals

Drive method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic
Maximum drawbar pull. . . . . . . . . . . . . . 264 kN 26900 kgf 59,300 lb
Gradeability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70%, 35
Maximum travel speed (Auto-Shift): . . . . . . . . . . . . . . . . . . . . . . . . .
High . . . . . . . . . . . . . . . . . 5.5 km/h 3.4 mph
Mid. . . . . . . . . . . . . . . . . . 4.5 km/h 2.8 mph
Low . . . . . . . . . . . . . . . . . 3.2 km/h 2.0 mph
Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
Parking brake. . . . . . . . . . . . . . . . . . . . . . . . . Mechanical disc brake

Shoes
600 mm
24"
700 mm
28"

PC350-8
Operating
Ground
Weight
Pressure
65.7 kPa
32600 kg
0.67 kgf/cm2
71,870 lb
9.53 psi
57.1
kPa
32960 kg
0.58 kgf/cm2
72,660 lb
8.28 psi

PC350LC-8
Operating
Ground
Weight
Pressure
62.9 kPa
33660 kg
0.64 kgf/cm2
74,210 lb
9.12 psi
54.5
kPa
34040 kg
0.56 kgf/cm2
75,040 lb
7.90 psi

11

PC350-8 0

HYDRAULIC EXCAVATOR

DIMENSIONS
Arm Length

3185 mm 10'5"

Model
Overall length

PC350-8
11140 mm 36'7"

Length on ground

5755 mm 18'11"

5930 mm

19'5"

C
D

Overall height (to top of boom)*

Overall width

3285 mm 10'9"
3190 mm 10'6"

3285 mm
3190 mm

10'9"
10'6"

Overall height (to top of cab)*

3145 mm 10'4"

3145 mm

10'4"

Ground clearance, counterweight

1185 mm 3'11"

1185 mm

3'11"

Ground clearance (minimum)

500 mm 1'8"

500 mm

1'8"

Tail swing radius

3450 mm 11'4"

3450 mm

11'4"

Track length on ground

3700 mm 12'2"

4030 mm

13'3"

Track length

4625 mm 15'2"

4955 mm

16'3"

Track gauge

2590 mm 8'6"

2590 mm

8'6"

Width of crawler

3190 mm 10'6"

3190 mm

10'6"

Shoe width

600 mm

24''
1.4''

600 mm

PC350LC-8
11140 mm 36'7"

24"

Grouser height

36 mm 1.4"

36 mm

Machine cab height

2585 mm 8'6"

2585 mm

8'6"

Machine cab width

3165 mm 10'5"

3165 mm

10'5"

Distance, swing center to rear end

3405 mm 11'2"

3405 mm

11'2"












*: Including grouser height

WORKING RANGE
Arm Length

3185 mm

10'5"

(m)
11

Max. digging height

10100 mm

33'2"

10

Max. dumping height

7050 mm

23'2"

Max. digging depth

7380 mm

24'3"

Max. vertical wall digging depth

6400 mm

21'0"

Max. digging depth of cut for 8' level

7180 mm

23'7"

Max. digging reach

11100 mm

36'5"

Max. digging reach at ground level

10920 mm 35'10"

Min. swing radius

4310 mm

8
7
6
4

3
2

14'2"

Bucket digging force at power max.

200 kN/20400 kgf/44,970 lb

rating

Arm crowd force at power max.

165 kN/16800 kgf/37,040 lb

Bucket digging force at power max.

228 kN/23200 kgf/51,150 lb

Arm crowd force at power max.

171 kN/17400 kgf/38,360 lb

rating

SAE
ISO

1
0

G.L.

-1
-2

D
C E

-3
-4
-5
-6
-7
-8
12 11 10 9
(m)

2440
G
F

BACKHOE BUCKET, ARM, AND BOOM COMBINATION

Bucket Capacity
(heaped)
SAE, PCSA
CECE
*1.40 m3 1.83 yd3
1.20 m3 1.57 yd3

Width
With Side Shrouds
1458 mm 57.4"

Without Side Shrouds

Weight
With Side Shrouds
1508 kg 3,320 lb

Number
of
Teeth
5

Arm Length
3185 mm
10'5"


 General purpose use, material density up to 1.8 ton/m 1.52 U.S. ton/yd
3

* Quarry bucket

12

PC350-8 0

HYDRAULIC EXCAVATOR

LIFTING CAPACITY WITH LIFTING MODE

A: Reach from swing center
B: Bucket hook height
C: Lifting capacity
Cf: Rating over front
Cs: Rating over side
: Rating at maximum reach

B
C
PC350-8

Arm: 3185 mm 10'5"

A
B

Bucket: 1.40 m3 1.83 yd3 SAE heaped

9.0m 29

MAX
Cf

Cs

7.5 m
24'

*4900 kg
*10,800 lb

6.0 m
19'

Cs

*4900 kg
*10,800 lb

*6400 kg
*14,200 lb

5550 kg
12,300 lb

*4800 kg
*10,600 lb

3950 kg
8,800 lb

*6750 kg
*14,800 lb

5500 kg
12,100 lb

4.5 m
14'

*4950 kg
*10,900 lb

3350 kg
7,400 lb

5500 kg
12,100 lb

3600 kg
8,000 lb

*7300 kg
*16,100 lb

3.0 m
9'

4750 kg
10,500 lb

3050 kg
6,700 lb

5350 kg
11,800 lb

3450 kg
7,700 lb

1.5 m
4'

4600 kg
10,200 lb

2900 kg
6,400 lb

5150 kg
11,400 lb

Om
0'

4700 kg
10,400 lb

2950 kg
6,500 lb

1.5 m
4'

5100 kg
11,200 lb

3200 kg
7,100 lb

3.0 m
9'

5900 kg
13,000 lb

3800 kg
8,300 lb

4.5 m
14'

*6950 kg
*15,300 lb

5050 kg
11,100 lb

6.0 m
19

*5700 kg
*12,600 lb

*5700 kg
*12,600 lb

Cs

5250 kg
11,600 lb

*8700 kg
*19,200 lb

7950 kg
17,500 lb

7450 kg
16,400 lb

4950 kg
11,000 lb

*10100 kg
*22,300 lb

3300 kg
7,300 lb

7150 kg
15,700 lb

4700 kg
10,300 lb

5050 kg
11,100 lb

3200 kg
7,000 lb

6900 kg
15,200 lb

5000 kg
11,000 lb

3150 kg
6,900 lb

Cs

7400 kg
16,300 lb

*14400 kg
*31,700 lb

11950 kg
26,300 lb

10400 kg
23,000 lb

6850 kg
15,100 lb

*16100 kg
*35,500 lb

10850 kg
23,900 lb

4450 kg
9,900 lb

10000 kg
22,100 lb

6500 kg
14,300 lb

16400 kg
36,100 lb

10300 kg
22,700 lb

6750 kg
14,900 lb

4350 kg
9,600 lb

9800 kg
21,600 lb

6300 kg
13,900 lb

16200 kg
35,700 lb

6750 kg
14,900 lb

4350 kg
9,600 lb

9800 kg
21,600 lb

6300 kg
13,900 lb

*9200 kg
*20,200 lb

6500 kg
14,300 lb

9.0m 29
Cs

7.5 m
24'

*4900 kg
*10,800 lb

6.0 m
19'

Cf

Cf

Cs

10150 kg
22,400 lb

*9050 kg
*19900 lb

*9050 kg
*19900 lb

*14900 kg
*32,800 lb

10250 kg
22,600 lb

*17300 kg
*38,200 lb

*17300 kg
*38,200 lb

*12250 kg
*27,000 lb

10550 kg
23,300 lb

*15900 kg
*35,100 lb

*15900 kg
*35,100 lb

*7550 kg
*16,600 lb

*7550 kg
*16,600 lb

Shoe: 600 mm 24" triple grouser

7.5 m 24'
Cs

3.0 m 9'

Cf

Bucket: 1.40 m3 1.83 yd3 SAE heaped

MAX
Cf

4.5 m 14'

Cf

Arm: 3185 mm 10'5"

Cs

6.0 m 19'

Cf

PC350LC-8

Cf

Shoe: 600 mm 24" triple grouser

7.5 m 24'

6.0 m 19'

Cf

Cs

*4900 kg
*10,800 lb

*6400 kg
*14,200 lb

5750 kg
12,600 lb

*4800 kg
*10,600 lb

4100 kg
9,000 lb

*6750 kg
*14,800 lb

5650 kg
12,500 lb

4.5 m
14'

*4950 kg
*10,900 lb

3500 kg
7,700 lb

6350 kg
14,100 lb

3750 kg
8,300 lb

*7300 kg
*16,100 lb

3.0 m
9'

*5300 kg
*11,700 lb

3150 kg
7,000 lb

6200 kg
13,700 lb

3600 kg
7,900 lb

1.5 m
4'

5400 kg
11,900 lb

3050 kg
6,700 lb

6050 kg
13,300 lb

Om
0'

5500 kg
12,200 lb

3100 kg
6,800 lb

1.5 m
4'

5950 kg
13,200 lb

3350 kg
7,400 lb

3.0 m
9'

6950 kg
15,300 lb

3900 kg
8,600 lb

4.5 m
14'

*6950 kg
*15,300 lb

5200 kg
11,500 lb

6.0 m
19

*5700 kg
*12,600 lb

*5700 kg
*12,600 lb

4.5 m 14'

Cf

Cs

5450 kg
12,000 lb

*8700 kg
*19,200 lb

8150 kg
18,000 lb

*8100 kg
*17,900 lb

5100 kg
11,300 lb

*10100 kg
*22,300 lb

3450 kg
7,600 lb

8300 kg
18,300 lb

4850 kg
10,700 lb

5900 kg
13,000 lb

3300 kg
7,300 lb

8050 kg
17,800 lb

5850 kg
12,900 lb

3250 kg
7,200 lb

3.0 m 9'

Cf

Cs

Cf

Cs

7600 kg
16,800 lb

*14400 kg
*31,700 lb

12250 kg
27,000 lb

*11400 kg
*25100 lb

7100 kg
15,600 lb

*16100 kg
*35,500 lb

11150 kg
24,600 lb

4650 kg
10,200 lb

11700 kg
25,900 lb

6700 kg
14,800 lb

*16900 kg
*37,200 lb

10600 kg
23,400 lb

7950 kg
17,500 lb

4500 kg
9,900 lb

11500 kg
25,400 lb

6500 kg
14,400 lb

*16400 kg
*36,100 lb

10450 kg
23,100 lb

*9050 kg
*19,900 lb

*9050 kg
*19,900 lb

7950 kg
17,500 lb

4500 kg
9,900 lb

*11150 kg
*24,500 lb

6500 kg
14,400 lb

*14900 kg
*32,800 lb

10600 kg
23,300 lb

*17300 kg
*38,200 lb

*17300 kg
*38,200 lb

*9200 kg
*20,200 lb

6700 kg
14,800 lb

*12250 kg
*27,000 lb

10850 kg
24,000 lb

*15900 kg
*35,100 lb

*15900 kg
*35,100 lb

*7550 kg
*16,600 lb

*7550 kg
*16,600 lb

*Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.

13