Scribd
Upload
97 views4 pages

Residual Current Devices

RCDs (residual current devices) are electrical safety devices that immediately cut power when electricity leakage to earth is detected at a harmful level. RCDs work by continuously comparing current flow in the active and neutral conductors, cutting power if current becomes unbalanced indicating leakage. There are three types of RCDs: switchboard mounted units that protect entire installations; powerpoint units that protect single outlets or circuits; and portable plug-in units used with extension cords or tools. RCDs significantly reduce electric shock risks by detecting leakage currents through a person's body to earth.

Uploaded by

Gabetsos Karaflidis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
97 views4 pages

Residual Current Devices

RCDs (residual current devices) are electrical safety devices that immediately cut power when electricity leakage to earth is detected at a harmful level. RCDs work by continuously comparing current flow in the active and neutral conductors, cutting power if current becomes unbalanced indicating leakage. There are three types of RCDs: switchboard mounted units that protect entire installations; powerpoint units that protect single outlets or circuits; and portable plug-in units used with extension cords or tools. RCDs significantly reduce electric shock risks by detecting leakage currents through a person's body to earth.

Uploaded by

Gabetsos Karaflidis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Residual Current Devices

What is an RCD and how does it work?


An RCD is an electrical safety device specifically designed to immediately switch the
electricity off when electricity "leaking" to earth is detected at a level harmful to a
person using electrical equipment. An RCD offers a high level of personal protection
from electric shock. RCDs are often known by other names, earth leakage circuit
breakers (ELCB) or safety switches.
RCDs have another important advantage - they reduce the risk of fire by detecting
electrical leakage to earth in electrical wiring and accessories. This is particularly
significant in older installations.

RCDs work on the principle "What goes in must come out". They operate by
continuously comparing the current flow in both the Active (supply) and Neutral
(return) conductors of an electrical circuit. If the current flow becomes sufficiently
unbalanced, some of the current in the Active conductor is not returning through the
Neutral conductor and is leaking to earth.
RCDs are designed to operate within 10 to 50 milliseconds and to disconnect the
electricity supply when they sense harmful leakage, typically 30 milliamps.
The sensitivity and speed of disconnection are such that any earth leakage will be
detected and automatically switched off before it can cause injury or damage.
Analyses of electrical accidents show the greatest risk of electric shock results from
contact between live parts and earth.
Contact with live parts may occur by touching:

bare conductors;
internal parts of an appliance; or
external parts of an appliance that have become "live" because of an internal
fault.

Contact with earth occurs through normal body contact with the ground or earthed
metal parts.
An RCD will significantly reduce the risk of electric shock, however, an RCD will not
protect against all instances of electric shock. If a person comes into contact with
both the Active and Neutral conductors while handling faulty plugs or appliances

causing electric current to flow through the person's body, this contact will not be
detected by the RCD unless there is also a current flow to earth.
On a circuit protected by an RCD, if a fault causes electricity to flow from the Active
conductor to earth through a person's body, the RCD will automatically disconnect
the electricity supply, avoiding the risk of a potentially fatal shock.

TYPES OF RCDs
There are three types of RCDs - switchboard mounted, powerpoint (GPO) type and
plug in (portable). Switchboard mounted and powerpoint types are referred to as nonportable RCDs. Portable RCDs are plugged into a fixed socket. A non-portable RCD
installed at the switchboard is the best option in most situations as it protects all the
wiring and appliances plugged into the circuit.
Switchboard Units
These are non-portable units installed at the switchboard to provide protection of the
complete installation, or protection of a selected circuit.

Switchboard RCD units.


These may be installed on
the main switchboard to
provide complete
installation protection or
selected circuit protection.

RCD installed in switchboard

Fixed Socket Units


These are non-portable units consisting of RCD protection inbuilt into a fixed socket
outlet to provide protection to equipment plugged into the outlet.

RCDs incorporated in fixed


sockets provide single outlet or
single circuit protection. This
type of unit may be installed at
selected locations by owners
in lieu of switchboard
protection.

RCD incorporated in fixed socket outlet

Portable Units
Various models are available from simple plug adaptors to units designed for specific
equipment such as the portable unit shown below that incorporates socket outlets
commonly used in the construction industry.

Portable RCD unit suitable for use with extension


cords and portable power tools.

Portable RCD
plug adaptor

Plug adaptor wired to


an extension cord

Portable RCD plugged into external power point.

Prepared by Ian Low


State Coordinator Electrical

WorkCover NSW
February 2011

You might also like