Scribd
Upload
656 views12 pages

Artcut2005 Software User Manual

This document provides instructions for using the Artcut2005 software to cut designs using a Redsail cutter. It describes selecting the cutter as the output device in the software, choosing the correct COM port and settings, adjusting compensation settings for different materials, and troubleshooting output issues by checking the COM port properties.

Uploaded by

Relu Garban
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
656 views12 pages

Artcut2005 Software User Manual

This document provides instructions for using the Artcut2005 software to cut designs using a Redsail cutter. It describes selecting the cutter as the output device in the software, choosing the correct COM port and settings, adjusting compensation settings for different materials, and troubleshooting output issues by checking the COM port properties.

Uploaded by

Relu Garban
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

Redsail Tech Co.

, Ltd
Addr: 218 Section F-2, Pioneer Square, Qilu Soft Park No.1 Shunhua
Road, Jinan Hi-tech Zone, Shandong, China ZIP: 250101
Tel: +86-531-86516855
Fax: +86-531-86516858
Email: [email protected]

Artcut2005 Software User Manual


1. Please select the Artwords, and then click the "Plot/Cut" in the File
option to output your work.

2. You will see the following window. Please select "REDSAIL(HPGL) "
for the Device, select "com1" or "com2" for the link to. Then press the
"setup" button into the next step.

http://www.redsailcutters.com

Redsail Tech Co., Ltd


Addr: 218 Section F-2, Pioneer Square, Qilu Soft Park No.1 Shunhua
Road, Jinan Hi-tech Zone, Shandong, China ZIP: 250101
Tel: +86-531-86516855
Fax: +86-531-86516858
Email: [email protected]

3. Please select the same COM port with the 2nd step. If you use the
RS232 cable, please select both XON/XOFF and RTS/CTS buttons; if
you use the USB cable, please select the XON/XOFF button only. Press
the "Plotter Compensation" into next step.

http://www.redsailcutters.com

Redsail Tech Co., Ltd


Addr: 218 Section F-2, Pioneer Square, Qilu Soft Park No.1 Shunhua
Road, Jinan Hi-tech Zone, Shandong, China ZIP: 250101
Tel: +86-531-86516855
Fax: +86-531-86516858
Email: [email protected]

http://www.redsailcutters.com

Redsail Tech Co., Ltd


Addr: 218 Section F-2, Pioneer Square, Qilu Soft Park No.1 Shunhua
Road, Jinan Hi-tech Zone, Shandong, China ZIP: 250101
Tel: +86-531-86516855
Fax: +86-531-86516858
Email: [email protected]

4. Please look at the following button: "Close" and "Shape Angle",


normally we change the figures to 0.97 and 0.38 separately. Please
change the figures according to different material.

5. All the settings have been finished. Please press the "Cut/Plot" button
to output.

http://www.redsailcutters.com

Redsail Tech Co., Ltd


Addr: 218 Section F-2, Pioneer Square, Qilu Soft Park No.1 Shunhua
Road, Jinan Hi-tech Zone, Shandong, China ZIP: 250101
Tel: +86-531-86516855
Fax: +86-531-86516858
Email: [email protected]

Caution:
If you can't output the work successfully after the above setting, please
check the following setting:
1. Click the right key of the Mouse on the icon "My Computer", then
click "Properties", the following dialog box will appear.

http://www.redsailcutters.com

Redsail Tech Co., Ltd


Addr: 218 Section F-2, Pioneer Square, Qilu Soft Park No.1 Shunhua
Road, Jinan Hi-tech Zone, Shandong, China ZIP: 250101
Tel: +86-531-86516855
Fax: +86-531-86516858
Email: [email protected]

2. Select the "Device Manager" in the "Hardware"

http://www.redsailcutters.com

Redsail Tech Co., Ltd


Addr: 218 Section F-2, Pioneer Square, Qilu Soft Park No.1 Shunhua
Road, Jinan Hi-tech Zone, Shandong, China ZIP: 250101
Tel: +86-531-86516855
Fax: +86-531-86516858
Email: [email protected]

3. Click the right key of the Mouse on the option "Communications Port
(COM1)" or "Communications Port (COM2)". If you the USB cable,
please click the right key of the Mouse on the option "USB-SERIAL ".
Select the "Properties" option into next step.

http://www.redsailcutters.com

Redsail Tech Co., Ltd


Addr: 218 Section F-2, Pioneer Square, Qilu Soft Park No.1 Shunhua
Road, Jinan Hi-tech Zone, Shandong, China ZIP: 250101
Tel: +86-531-86516855
Fax: +86-531-86516858
Email: [email protected]

4. Select the "Port settings", next, select "XON/XOFF" in "Flow


Control". As shown in figure.

http://www.redsailcutters.com

Redsail Tech Co., Ltd


Addr: 218 Section F-2, Pioneer Square, Qilu Soft Park No.1 Shunhua
Road, Jinan Hi-tech Zone, Shandong, China ZIP: 250101
Tel: +86-531-86516855
Fax: +86-531-86516858
Email: [email protected]

http://www.redsailcutters.com

Redsail Tech Co., Ltd


Addr: 218 Section F-2, Pioneer Square, Qilu Soft Park No.1 Shunhua
Road, Jinan Hi-tech Zone, Shandong, China ZIP: 250101
Tel: +86-531-86516855
Fax: +86-531-86516858
Email: [email protected]

5. Click the button "Advanced...", then select "COM1/COM2" in the


"COM port NO." of the "Advanced Settings for com port", as shown
in figure. Please keep the COM port the same with others.

http://www.redsailcutters.com

Redsail Tech Co., Ltd


Addr: 218 Section F-2, Pioneer Square, Qilu Soft Park No.1 Shunhua
Road, Jinan Hi-tech Zone, Shandong, China ZIP: 250101
Tel: +86-531-86516855
Fax: +86-531-86516858
Email: [email protected]

http://www.redsailcutters.com

Redsail Tech Co., Ltd


Addr: 218 Section F-2, Pioneer Square, Qilu Soft Park No.1 Shunhua
Road, Jinan Hi-tech Zone, Shandong, China ZIP: 250101
Tel: +86-531-86516855
Fax: +86-531-86516858
Email: [email protected]

All the setting has been finished! Thanks!

Redsail Tech. Co., Ltd.


2008-2009

http://www.redsailcutters.com

You might also like