W E

C O N V E Y

Q U A L I T Y

PAN CONVEYORS

W E

CONTENTS

AUMUND
Pan Conveyors

2 AUMUND Pan Conveyors

4 Pan Conveyor with Deep
Drawn Pans Type KZB
8 Pan Conveyor with Deep
Drawn Pans and Baffles
Type KZB-Q
10 Pan Conveyor with Buckets
Type BZB
14 Pivoting Pan Conveyor
Type SPB
18 Reversible Deep-Drawn
Pan Conveyor
Type KZB-R
19 Silo Discharge Type SAK
20 Components
Chain Technology

Technology with proven quality,

strength and reliability
AUMUND Pan Conveyors are designed
to suit efficiency driven process
technologies and to ensure system
performance.
At AUMUND we know that trouble-free
operation of the conveying equipment is
vital for the productivity and profitability of
the whole plant. Keeping in mind this
objective we are committed to our high
quality standards which are reflected in the
exceptional service life of the AUMUND Pan
Conveyor.
Our focus is to satisfy specific requirements
with creative, cost-effective solutions for the
transport of the whole range of bulk
materials in cement production from
limestone, cement and additives to hot and
abrasive cement clinker.

21 Accessories
22 Conversions and
Refurbishments
23 After-Sales Services

With 85 years in industrial engineering of

conveying equipment we also assist
customers worldwide with conceptual
layouts and configuration. Our primary goal
is to identify and provide the most efficient
and economic conveying routes.

For the whole range of bulk materials

in cement production
Engineered to suit plant and
operator needs
High quality standards
Outstanding service life
Efficient and economic
conveying routes

C O N V E Y

Q U A L I T Y

W E

C O N V E Y

Conveying route with Pan Conveyor KZB

PAN CONVEYOR WITH DEEP DRAWN PANS

TYPE KZB
The Pan Conveyor with deep drawn pans type KZB
is designed to suit slopes matching the angle of
repose of the conveyed bulk material.

Installed underneath the clinker stock in combination

with the AUMUND Silo Discharge Gate, the Pan
Conveyor with deep drawn pans Type KZB allows
for dust-controlled clinker reclaim.

For clinker handling the Pan Conveyor type KZB

suits conveying routes with an inclination up to 30.
This Pan Conveyor type is the ideal direct connection
between cooler and clinker stock especially for
applications with grate coolers. The design allows
the Pan Conveyor to be arranged underneath the
whole cooler length and to collect the fines from the
dust collecting hoppers same as the clinker from the
crusher.
4

Designed for conveying routes with

up to 30 inclination
Conveying heights exceeding 75 m
Conveying capacities exceeding 1,000 t/h
Chains with 290 to 3,000 kN breaking load
per strand

Q U A L I T Y

Deep Drawn Pan Conveyor under Clinker Cooler

FEATURES
Accepts temperatures to 700C
Designed as a modular structure with
standard components
Profiled pans for high rigidity
Minimum spillage
Highly wear resistant chains with high yield strength
High quality standards on all components

BENEFITS

Efficient and reliable operation

Reduced installation time
Low operating costs
Minimum and easy maintenance
Low power consumption
Low overall investment cost
Outstanding service life
5

W E

Pan Conveyor with Deep Drawn Pans Type KZB

Pan Conveyor type KZB - Detail

6

C O N V E Y

Q U A L I T Y

Conveying Capacities - Pan Conveyor Type KZB

The capacities indicated correspond to a brimfull filling (water filling) = 100 %.
Capacity reduction factor subject to angle of inclination.
Conveyor section
type KZB
Width

Deep-Drawn Pan Conveyor - Detail

The characteristic profile of the pans

with their contact-free overlapping
offers high rigidity with large pan widths
and a closed surface in the return
stations. Stiffeners pressed into the side
plates combined with a sealing edge of
special design provide the tight fitting to
avoid spillage.
The range of AUMUND conveyor chains
covers a large range of applications,
from small capacities and horizontal
conveying routes to high capacities and
lifts.
The chain - for single or double strand
application is chosen to suit the actual
traction force while the roller size is
chosen in accordance with the weight
of the pan conveyor itself and the
conveyed material.
The drive units feature bevel spur gears
either foot mounted with flexible coupling or shaft-mounted. For inclined
conveying, the gear box is fitted with a
back stop or, alternatively, a flexible
coupling with brake is arranged
between gear box and motor.
The coupling between motor and gear
box can be hydraulic or flexible for soft
start-up. Frequency converters adapt
the conveying speed to the actual
conveying capacity.

Theoretical conveying capacity m/h

mm

Side wall
height
mm

Conveying speed m/s

0.10

0.15

0.20

0.25

0.30

0.35

400
400
400
400
400

100
150
200
250
300

11
19
26
33
40

17
28
39
50
60

23
37
52
66
81

29
47
65
83
101

34
56
78
99
121

40
65
91
116
141

600
600
600
600
600

150
200
250
300
350

28
39
50
60
71

42
58
74
91
107

56
78
99
121
142

70
97
124
151
178

84
116
149
181
214

98
136
174
211
249

800
800
800
800
800

200
250
300
350
400

52
66
81
95
109

78
99
121
142
164

104
132
161
190
219

129
165
201
237
273

155
198
242
285
328

181
232
282
332
383

1,000
1,000
1,000
1,000
1,000

200
250
300
350
400

65
83
101
119
137

97
124
151
178
205

130
165
201
237
273

162
207
252
297
342

194
248
302
356
410

226
289
352
415
478

1,200
1,200
1,200
1,200
1,200

200
250
300
350
400

78
99
121
142
164

116
149
181
214
246

155
198
242
285
328

194
248
302
356
410

233
298
363
427
492

272
347
423
499
574

1,400
1,400
1,400
1,400

250
300
350
400

116
141
166
191

174
211
249
287

232
282
332
383

289
352
415
478

347
423
499
574

405
493
582
670

1,600
1,600
1,600
1,600
1,600

250
300
350
400
450

132
161
190
219
248

198
242
285
328
371

265
322
380
437
495

331
403
475
547
619

397
483
570
656
743

463
564
665
766
866

1,800
1,800
1,800
1,800
1,800

250
300
350
400
450

149
181
214
246
278

223
272
321
369
418

298
363
427
492
557

372
453
534
615
696

447
544
641
738
835

521
634
748
861
975

2,000
2,000
2,000
2,000
2,000

250
300
350
400
450

165
201
237
273
309

248
302
356
410
464

331
403
475
547
619

414
504
594
684
774

496
604
712
820
928

579
705
831
957
1,083

2,200
2,200
2,200
2,200
2,200

250
300
350
400
450

182
222
261
301
340

273
332
392
451
511

364
443
522
602
681

455
554
653
752
851

546
665
783
902
1,021

637
775
914
1,053
1,191

2,400
2,400
2,400
2,400
2,400

250
300
350
400
450

198
242
285
328
371

298
363
427
492
557

397
483
570
656
743

496
604
712
820
928

595
725
855
984
1,114

695
846
997
1,148
1,300

W E

C O N V E Y

Pan Conveyor KZB-Q connecting cooler and silo

PAN CONVEYOR WITH DEEP DRAWN PANS AND BAFFLES

TYPE KZB-Q

Designed for conveying routes

with up to 45 inclination
Conveying heights to 78 m
Conveying capacities
to 700 t/h
Chains with 290 to 3,000 kN
breaking load per strand
8

KZB-Q inclined at 45 degrees

Q U A L I T Y

For slopes exceeding 30 degrees

retainer baffles are fitted to the deep
drawn pans. These baffles are welded
to the bottom plate and held in a
loose fitting by cams which are
pressed into the upper part of the
side boards. The loose fitting allows
the baffles to bend in case foreign
bodies get onto the conveyor.
All further parts of the KZB-Q are
interchangeable with the KZB. These
standardized components constitute
the AUMUND modular system for
easy field assembly and interchangeability, an important asset for spare
parts administration.

Deep Drawn Pans with Baffles

Conveying Capacities - Pan Conveyor Type KZB-Q

The capacities indicated correspond to a brimfull filling (water filling) = 100 %.
Capacity reduction factor subject to angle of inclination.
Conveyor section
type KZB-Q
Width

Theoretical conveying capacity m/h

mm

Side wall
height
mm

Conveyor speed m/s

0.10

0.15

0.20

0.25

0.30

0.35

400
400
400
400

250
300
350
400

33
40
47
55

50
60
71
82

66
81
95
109

83
101
119
137

99
121
142
164

116
141
166
191

600
600
600
600

250
300
350
400

50
60
71
82

74
91
107
123

99
121
142
164

124
151
178
205

149
181
214
246

174
211
249
287

800
800
800
800
800

250
300
350
400
450

66
81
95
109
124

99
121
142
164
186

132
161
190
219
248

165
201
237
273
309

198
242
285
328
371

232
282
332
383
433

1,000
1,000
1,000
1,000
1,000

250
300
350
400
450

83
101
119
137
155

124
151
178
205
232

165
201
237
273
309

207
252
297
342
387

248
302
356
410
464

289
352
415
478
541

1,200
1,200
1,200
1,200
1,200

250
300
350
400
450

99
121
142
164
186

149
181
214
246
278

198
242
285
328
371

248
302
356
410
464

298
363
427
492
557

347
423
499
574
650

1,400
1,400
1,400
1,400
1,400

250
300
350
400
450

116
141
166
191
217

174
211
249
287
325

232
282
332
383
433

289
352
415
478
541

347
423
499
574
650

405
493
582
670
758

1,600
1,600
1,600
1,600

300
350
400
450

161
190
219
248

242
285
328
371

322
380
437
495

403
475
547
619

483
570
656
743

564
665
766
866

1,800
1,800
1,800
1,800

300
350
400
450

181
214
246
278

272
321
369
418

363
427
492
557

453
534
615
696

544
641
738
835

634
748
861
975

2,000
2,000
2,000
2,000

300
350
400
450

201
237
273
309

302
356
410
464

403
475
547
619

504
594
684
774

604
712
820
928

705
831
957
1,083

2,200
2,200
2,200
2,200

300
350
400
450

222
261
301
340

332
392
451
511

443
522
602
681

554
653
752
851

665
783
902
1,021

775
914
1,053
1,191

2,400
2,400
2,400
2,400

300
350
400
450

242
285
328
371

363
427
492
557

483
570
656
743

604
712
820
928

725
855
984
1,114

846
997
1,148
1,300

W E

C O N V E Y

Feeding of covered stockpile

PAN CONVEYOR WITH BUCKETS

TYPE BZB
Designed for conveying routes with
up to 60 inclination
Conveying heights to 96 m
Conveying capacities to 500 t/h
Chains with 290 to 3,000 kN breaking
load per strand

Designed for conveying at an inclination up to 60

degrees, the Bucket Conveyor fits into layouts
combining high elevation with restricted space. The
narrow curve radius is a further feature to suit these
applications where only limited space is available, a
considerable advantage for modernization projects
or conversion in existing plants.

Wherever conveying of clinker with a high content

of fines is required, the Bucket Conveyor type BZB
is the most appropriate choice. The bucket design
with either forward or backward overlapping is
designed to suit this particular application and
minimizes spillage and cleaning.

Uniform bucket filling and even material distribution

over the whole bucket width is ensured by expert
planning of the feed chute system - a pre-requisite
for trouble-free operation with minimum dust
generation.

10

Q U A L I T Y

Bucket Apron Conveyor

Feeding of mill hoppers

11

W E

Clinker Transport with Conveyor type BZB

12

C O N V E Y

Q U A L I T Y

Conveying Capacities - Bucket Conveyor Type BZB

The capacities indicated correspond to a brimfull filling (water filling) = 100 %.
Capacity reduction factor subject to angle of inclination.
Conveyor section
type BZB
Width

Bucket Apron Conveyor type BZB Detail

The bucket - standard widths to

1,600 mm - feature a built-in stiffener
for high solidity.
Depending on the case of application
the overlapping of the buckets is
either forward or backward. With the
tight bucket arrangement the BZB
meets the criteria for proper feeding
with minimum spillage.
The modular system also applies
for the AUMUND Bucket Conveyor,
ensuring interchangeability and
combination with components like
those used with the Deep Drawn
Pan Conveyor.

Theoretical conveying capacity m/h

mm

Side wall
height
mm

Conveyor speed m/s

0.10

0.15

0.20

0.25

0.30

0.35

400
400

200
250

21
27

31
40

42
54

52
67

62
81

73
94

600
600
600

200
250
300

31
40
49

47
60
74

62
81
99

78
101
123

94
121
148

109
141
172

800
800
800
800

250
300
350
400

54
66
78
90

81
99
117
135

107
131
155
179

134
164
194
224

161
197
233
269

188
230
272
314

1,000
1,000
1,000

300
350
400

78
92
106

117
138
159

156
184
212

196
230
265

235
277
318

274
323
372

1,200
1,200

350
400

111
127

166
191

221
255

277
318

332
382

387
446

1,400
1,400

350
400

129
149

194
223

258
297

323
372

387
446

452
520

1,600
1,600

350
400

148
170

221
255

295
340

369
425

443
510

516
594

Features

Ideal for conveying of clinker with a high content of fines

Narrow curve radius, down to 10 m
Expert design of the feed chute system
Designed as a modular structure with standard
components
Minimum spillage
Highly wear resistant chains with high yield strength
High quality standards on all components

Benefits

Efficient and reliable operation

Suits applications with limited space
Low operating costs
Minimum and easy maintenance
Outstanding service life

13

W E

C O N V E Y

Feeding two silos in line

PIVOTING PAN CONVEYOR

TYPE SPB
For bulk material distribution into a series of silos or
hoppers, the Pivoting Pan Conveyor offers the most
versatile arrangements.
The Pivoting Pan Conveyor ensures PLC controlled
multiple distribution of various materials with just
one conveyor.
Pan reversing system for simultaneous
conveying on the upper and lower run
Intermediate discharge stations placed
at any given position
Upper and lower run feeding
Specific feeding and discharge features
14

Feeding onto the upper run is performed with a

standard feed chute whilst a two-way chute leads
the bulk material to the lower run. Equipped with an
overflow system the feed chutes also ensure direct
discharge of the bulk material into the silo or
hopper.
Intermediate discharge stations may be positioned
where required and permit remote controlled
switching from one discharge station to the other.
Bulk material directed onto the upper run can
subsequently be transferred to the lower run
through an intermediate discharge station located
on the upper run.

Q U A L I T Y

Feed chute
Upper run
Feed chute
Lower run

Discharge station
Upper run

Take-up
station

Drive
station

Discharge station
Lower run
Overflow

Upper and lower run feeding and discharge

The material may then be

distributed into clinker silos
or mill hoppers through
discharge stations on the
lower run.
Simultaneous conveying on
the upper and the lower run
is a further alternative. A
hopper can thus be loaded
with cement clinker by way
of the lower run whilst for
example gypsum is conveyed
on the upper run.

Mill hopper feeding

15

W E
W E

C O N V E Y
C O N V E Y

Bulk Material Distribution into Storage Halls

Drive
station

Drive
station

Feeding lower run

Feed chute with

emergency overflow

Discharge carriage

Direction of travel for mobile

discharge carriage

Take-up station

Drive
station

Feeding
upper run

Take-up station

Bulk Material Distribution into a Series of Silos

Drive
station

Drive
station

Feeding lower run

Take-up station

Drive
station
Feeding upper run

Feed chute with emergency

overflow

Dis
sta

Take-up station

Bulk Material Distribution into Silos and Storage Hall

Drive
station

16

Feeding
upper run

Discharge
carriage

Take-up station

Drive
station

Feeding
Lower run 1

Feeding
Lower ru

Q U A L I T Y
Q U A L I T Y

Conveying capacity - Pivoting Pan Conveyor Type SPB

The capacities indicated correspond to a brimfull filling (water filling) =100 %

scharge
ation

un 2

Theoretical conveying capacity m3/h

Conveyor section

Discharge
carriage

Take-up station

Pan width

Plw mm
400
400
600
600
800
800
1,000
1,000
1,200
1,200
1,400
1,400
1,600
1,600

Side wall height Conveyor speed m /s

mm

150
200
150
200
150
200
150
200
150
200
150
200
150
200

0.10
22
29
32
43
43
58
54
72
65
86
76
101
86
115

Filling rate limit

0.15
32
43
49
65
65
86
81
108
97
130
113
151
130
173

0.20
43
58
65
86
86
115
108
144
130
173
151
202
173
230

Theoretical rate limit

Take-up station with

forced discharge

Feeding of long clinker storage

halls requires continuous shifting
of the discharge point. A mobile
discharge carriage which can be
moved to any given position
above the hall is used with this
particular application. The clinker
is continuously distributed over
the whole travel length of the
carriage.

0.25
54
72
81
108
108
144
135
180
162
216
189
252
216
288

0.30
65
86
97
130
130
173
162
216
194
259
227
302
259
346

115%
105%
120%
110%
125%
115%
130%
120%
135%
125%
140%
130%
140%
130%

Filling rate limit

Sensors on the conveyor

supports monitor the position of
the travelling carriage. Level
indicators control automatic
shifting of the carriage as soon
as a maximum filling level is
reached inside the storage hall.

Automated feeding of clinker silos, mill hoppers and

clinker halls
Simultaneous conveying of different bulk materials
Feeding upper run
Discharge carriage

Take-up station

PLC-controlled operation
Automated material distribution controlled by level sensors
Customized layout and planning
Standardized components

17

W E

C O N V E Y

Clinker Silos 2 x 60,000 t

REVERSIBLE DEEP-DRAWN PAN CONVEYOR

TYPE KZB-R
For applications where conveying in both directions
is required, the Deep Drawn Pan Conveyor may be
converted into a reversible conveyor. Alternate
feeding of two silos with just one conveyor is made
possible by simply changing the conveying direction.
This conveyor of special design suits horizontal
arrangements. The illustration shows a plant where
feeding of two clinker silos is performed with one
Bucket Elevator and one Reversible Conveyor. The
Bucket Elevator unloads the clinker in the centre of
the subsequent Reversible Conveyor which then
feeds the clinker to either one of the silos.
Operation of the Reversible Conveyor is PLC controlled from the central control room ensuring that the

Clinker silo feeding with reversible pan conveyor

18

pans are cleared before shifting from one direction

to reverse conveying.
To achieve this type of operation the pans are
arranged such that the pan overlapping always
points into the chosen conveying direction.
If required with a long centre distance, both
conveyor ends are fitted with a drive unit.
Alternate feeding of two silos with
one conveyor
Conveying in both directions by simply
shifting to reverse conveying

Reversible pan conveyor - functional principle

Q U A L I T Y

Silo Discharge with Remote Control

SILO DISCHARGE
TYPE SAK
For clinker silo discharge with low dust emission,
for proportional addition of low-burnt or imported
clinker AUMUNDs product range includes the
Gravity Discharge Unit operating in combination
with the Deep Drawn Pan Conveyor. The height of
the material layer on the pan conveyor determines
the discharge rate and the feeding capacity onto the
subsequent conveying equipment. Preset during
commissioning, it is adjusted to the specific
requirements of the plant.
With its built-in motorized shell gate the Gravity
Discharge Unit prevents the clinker from falling in

an uncontrolled manner onto the pan conveyor. It

reclaims the clinker at low speed and minimizes
dust generation.
Where adequate, the Gravity Discharge Unit may
also be manually operated.
For uniform discharge of the stored volume, a multitude of motorized Gravity Discharge Units are installed underneath the clinker silo. Switching between
discharge points is made by remote control assisted
by ultrasonic sensors detecting lack of clinker on the
conveyor.
19

W E

C O N V E Y

COMPONENTS
AUMUND Pan Conveyors feature standardized
components forming part of the modular system.
Components of different pan conveyor types are
interchangeable, a major advantage for spare parts
management.
Bogie-type rails ranging from size S14 to S30,
chosen to suit the pan conveyor size
Roller guide-rails in the curve area
Standard roller design with tempered running
surface and multiple sealing and life lubrication
Drive and tail shaft sprockets with exchangeable
toothed segments for easy replacement
Sprockets with double tooth pitch meshing
with the sprocket teeth only after each second
turn for increase of lifetime
Chains with breaking loads ranging from
290 kN to 3,000 kN

Type

for conveyor type breaking load kN

AU3032.1
BAU3032.1

KZB
BZB

290

AU4540.1
BAU4540.1

KZB
BZB

510

AU5544.1
BAU5544.1

KZB
BZB

700

AU6052.1
BAU6052.1

KZB
BZB

900

AU6060.1
BAU6060.1

KZB
BZB

1,200

AU8076.1
BAU8076.1

KZB
BZB

1,900

AU9085.1
BAU9085.1

KZB
BZB

2,350

AU10090.1
BAU10090.1

KZB
BZB

3,000

Chain pitch 250mm

20

CHAIN TECHNOLOGY
High precision manufacturing technology
Special, wear-resistant steel
High yield strength
AUMUND chains for Pan Conveyors are fabricated
from special steel suitable for accurate laser
cutting. The high precision manufacturing
technology combines high yield strength with
perfect distribution of forces.
The chain features a divided chain locking link, so
field assembly is simplified.

Q U A L I T Y

ACCESSORIES

Two way distribution chute

Three way distribution chute
Motorized flat gate
Maintenance trolley for conveyor bridge

Remote control of downstream conveying directions

is performed with the AUMUND two or three-way
distribution chute. The chutes are fitted with shell
gates actuated either by a gear motor or a hydraulic /
pneumatic cylinder. Casing and shell gates are of
wear-resistant design for a long service life.
Motorized flat gates of sturdy design complete the
range of accessory equipment for material distribution.
In addition, AUMUND offers maintenance trolleys
with rack and pinion drive to be installed inside
conveyor bridges for transportation of heavy tools, oil
bins or equipment components to the top of high
clinker silos. The maintenance trolleys are designed to
suit any angle of inclination.
The range of accessory equipment is completed by
truck and ship loading systems with low dust generation and electronic control for easy loading operations.
21

W E

C O N V E Y

Installation of new bucket strand

CONVERSIONS AND REFURBISHMENTS

Upgrading of existing plant components

Targeting increased efficiency
Higher output
Improved availability

With our expert team of engineers planning selective modernisation measures, we pay special attention to the upgrading of
existing plant components, targeting increased efficiency,
higher output rates and improved availability.
Upgrading of your materials handling and storage equipment to
state-of-the-art technology is achieved through a tailor-made
refurbishment process under optimum utilisation of time and
budget.
Most of the existing components are re-used in the refurbishment process to save cost.
Engineered conversions and refurbishments for increased
efficiency and output are performed on AUMUND equipment
as well as on the equipment of other manufacturers.
Pre-assembly of chain strands
22

Q U A L I T Y

AFTER-SALES
SERVICES
Customer Proximity
around the World
At AUMUND, service does not end at the
sale of the equipment. It's the beginning of
a long-term partnership. AUMUND offers
you a full range of services from commissioning to the delivery of quality spare and
wear parts to customized preventive maintenance programs and equipment upgradings. The benefits for you: Maximum
equipment efficiency at lower operating
costs.
Commissioning and Field Service
Today, presence on the spot is an absolute
must. Therefore, our commissioning and
service engineers operate from support
centers on all continents to guarantee
immediate and competent support.
Spare and Wear Parts
A comprehensive range of genuine spare
parts is available for our entire product
range from stocks in Germany, Great Britain
and the USA. Our product specialists provide
assistance and respond instantly.
Retrofits
Aged and worn equipment? Capacity
increase needed? Too high operating cost?
Aumund just as new retrofits are economical and tailor-made solutions for improving
your existing equipment at reasonable cost.
Preventive Maintenance
Knowing beforehand that service will be
needed allows you to schedule downtime
and save money with timely repairs. Repairs
or retrofits can be accurately anticipated
allowing for the downtime to be at the most
convenient times and at the lowest possible
cost.

THE AUMUND GROUP

GERMANY

THE NETHERLANDS

AUMUND Frdererbau GmbH

Saalhoffer Str. 17
47495 Rheinberg
Phone: +49 - 2843 - 72 0
Fax:
+49 - 2843 - 6 02 70
e-mail: [email protected]
www.aumund.com

AUMUND Holding B.V.

Wilhelminapark 40
5911 EE Venlo
Phone: +31 - 77 - 320 01 11
Fax:
+31 - 77 - 320 07 28
e-mail: [email protected]

AUMUND Frdertechnik GmbH

Saalhoffer Str. 17
47495 Rheinberg
Phone: +49 - 2843 - 72 0
Fax:
+49 - 2843 - 6 02 70
e-mail: [email protected]
www.aumund.com

SWITZERLAND

AUMUND Logistic GmbH

Saalhoffer Str. 17
47495 Rheinberg
Phone: +49 - 2843 - 72 0
Fax:
+49 - 2843 - 72 47 3
e-mail: [email protected]
www.aumund.com
SCHADE Lagertechnik GmbH
Dorstener Strae 360
44653 Herne
Phone: +49 - 2325 - 58 74 0
Fax:
+49 - 2325 - 58 74 74
e-mail: [email protected]
www.schade-lagertechnik.com

GREAT BRITAIN
B&W Mechanical Handling Ltd.
Gemini House Cambridgeshire
Business Park, 1 Bartholomew`s Walk
Ely, Cambridgeshire CB7 4EA
Phone: +44 - 1353 - 665 001
Fax:
+44 - 1353 - 666 734
e-mail: [email protected]
www.bwmech.co.uk

INDIA
AUMUND Engineering
Private Ltd.
2nd Floor, Lakshmi Neela Rite Choice
Chambers 9, Bazulla Road,
T. Nagar Chennai - 600 017
Phone: +91 - 44 - 4393 63 00
Fax:
+91 - 44 - 2815 60 46
e-mail: [email protected]

RUSSIA
AUMUND Representative
Office Moscow
German-Russian House, Office 44
ul. Malaja Pirogovskaja 5
119435 Moscow / Russia
Phone: +7 495 2879002
Fax:
+7 495 2879006
e-mail: [email protected]

AUMUND AG
Arther Str. 3
6301 Zug
Phone: +41 - 41 - 710 10 82
Fax:
+41 - 41 - 710 42 02
e-mail: [email protected]

FRANCE
AUMUND France S.A.R.L.
43, rue de Trvise F 75009 Paris
Phone: +33 - 1 - 42 46 72 72
Fax:
+33 - 1 - 42 46 72 74
e-mail: [email protected]

BRAZIL
AUMUND Ltda.
Rua Haddock Lobo, 337 - 11. andar
01414-001 So Paulo, SP
Phone: +55 - 11 - 3059 0160
Fax:
+55 - 11 - 3059 0161
e-mail: [email protected]

USA
AUMUND Corporation
1825 Barrett Lakes Boulevard
Barrett Lakes Center II
Suite 520
Kennesaw, GA 30144
Phone: +1 - 770 - 226 - 95 78
Fax:
+1 - 770 - 953 - 48 44
e-mail: [email protected]

P.R. CHINA
AUMUND Machinery Trading
(Beijing) Co. Ltd.
Rm. 7-8, 22-F, East Ocean Centre
No. 24 Jianguomenwai Avenue
Chaoyang District
Beijing 100004
Phone: +86 - 10 - 65 15 58 13 / 14
Fax:
+86 - 10 - 65 15 58 15
e-mail: [email protected]

HONG KONG SAR

AUMUND Asia (H.K.) Limited
Suite 1301, Oxford House,
Taikoo Place, 979 Kings Road,
Quarry Bay
Hong Kong
Phone: +852 - 3695 - 43 33
Fax:
+852 - 3695 - 43 11
e-mail: [email protected]

23

C O N V E Y

Q U A L I T Y

AUMUND Headquarters in Rheinberg, Germany

Your partner for all requirements regarding material

handling and storage.
We design, engineer, manufacture, erect and service
reliable equipment.
Reputation and competence proven by more than
10,000 installations in over 100 countries.

www.aumund.com
AU MUND Foerdertechnik GmbH . Saalhoffer Str. 17 . 47495 Rheinberg (Germany)
Tel.: + 49 (0) 28 43-720 . Fax: + 49 (0) 28 43-6 02 70 . e-mail: [email protected]

GB Technical data subject to change without notice A-GB-01-VI/10-FE. 2010 By AUMUND Foerdertechnik GmbH. All rights reserved.

W E