0% found this document useful (0 votes)
67 views2 pages

75W Single Output Industrial DIN Rail Power Supply: Series

This document summarizes the specifications and features of the DR-75 series 75W single output industrial DIN rail power supply. It provides 12V, 24V and 48V output voltages with maximum power ratings of 76W, 76W and 76.8W respectively. It has universal AC input, short circuit and over voltage protections. It measures 55.5x125.2x100mm and can be installed on DIN rail TS-35. It has 3 years warranty and is UL508 and TUV EN60950 approved.

Uploaded by

cahes
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
67 views2 pages

75W Single Output Industrial DIN Rail Power Supply: Series

This document summarizes the specifications and features of the DR-75 series 75W single output industrial DIN rail power supply. It provides 12V, 24V and 48V output voltages with maximum power ratings of 76W, 76W and 76.8W respectively. It has universal AC input, short circuit and over voltage protections. It measures 55.5x125.2x100mm and can be installed on DIN rail TS-35. It has 3 years warranty and is UL508 and TUV EN60950 approved.

Uploaded by

cahes
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

75W Single Output Industrial DIN Rail Power Supply

DR-75

series

Features :
Universal AC input/Full range
Protections:Short circuit/Over load/Over voltage/Over temperature
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
UL 508(industrial control equipment)approved
LED indicator for power on
100% full load burn-in test
Fix switching frequency at 50KHz
3 years warranty

SPECIFICATION
MODEL
DC VOLTAGE

OUTPUT

DR-75-24

DR-75-48

24V

48V

RATED CURRENT

6.3A

3.2A

1.6A

CURRENT RANGE

0 ~ 6.3A

0 ~ 3.2A

0 ~ 1.6A

RATED POWER

76W

76.8W

76.8W

150mVp-p

240mVp-p

24 ~ 28V

48 ~ 53V

RIPPLE & NOISE (max.) Note.2 100mVp-p


VOLTAGE ADJ. RANGE
12 ~ 14V
VOLTAGE TOLERANCE Note.3
LINE REGULATION

LOAD REGULATION

INPUT

DR-75-12
12V

2.0%

1.0%

1.0%

0.5%

0.5%

0.5%

1.0%

1.0%

1.0%

SETUP, RISE, HOLD TIME

1000ms, 60ms, 50ms/230VAC

VOLTAGE RANGE

85 ~ 264VAC

FREQUENCY RANGE

47 ~ 63Hz

1800ms, 60ms, 10ms/115VAC at full load

120 ~ 370VDC

EFFICIENCY (Typ.)

76%

AC CURRENT
INRUSH CURRENT (max.)

2A/115V
1.2A/230V
COLD START 30A/115VAC

LEAKAGE CURRENT

<1mA / 240VAC

OVER LOAD

105 ~ 150% rated output power


Protection type : Constant current limiting, recovers automatically after fault condition is removed

PROTECTION OVER VOLTAGE

OVER TEMPERATURE
WORKING TEMP.

80%

81%

60A/230VAC

15 ~ 16.5V

29 ~ 34V

58 ~ 65V

Protection type : Hiccup mode, recovers automatically after fault condition is removed
85

(TSW1) Detect on heat sink of power transistor

Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
-10 ~ +60

(Refer to output load derating curve)

20 ~ 90% RH non-condensing
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.03%/ (0 ~ 50
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
UL508, TUV EN60950 Approved
WITHSTAND VOLTAGE
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
SAFETY &
ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMC
EMI CONDUCTION & RADIATION Compliance to EN55011,EN55022 (CISPR22) Class B
(Note 4)

HARMONIC CURRENT
EMS IMMUNITY
MTBF
OTHERS

DIMENSION
PACKING

NOTE

Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN61000-6-2 (EN50082-2) Heavy industry level, criteria A
123.1K hrs min. MIL-HDBK-217F (25
55.5*125.2*100mm (W*H*D)
0.6Kg; 20pcs/13Kg/1.1CUFT

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.

Distribuido por:

Rua Jos Rafaelli, 221 - CEP: 04763-280 - So Paulo, SP


Tel: 55 (11)5683-5700 Fax: 55 (11) 5524-2324

File Name:DR-75-SPEC 2004-06-30

DR-75

75W Single Output Industrial DIN Rail Power Supply


Mechanical Specification

Unit:mm

100

Case No. 923

series

+V ADJ.

125.2
TB2

TB1

1
2
3
4

55.5

1
2
3

35

LED

ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15

Terminal Pin. No Assignment (TB1)


Pin No.
1
2
3

Terminal Pin. No Assignment (TB2)

Assignment
FG
AC/N
AC/L

Pin No.
1,2
3,4

Output Derating

Assignment
DC OUTPUT +V
DC OUTPUT -V

Output Derating Vs Input Voltage

100

100

24V,48V
90

80

12V

80
70

LOAD (%)

LOAD (%)

60
40

20

-10

60
50
40

10

20

30

45

AMBIENT TEMPERATURE (

50

60 (VERTICAL)

85

90

105

125

145

165

185

205

225

245 265

INPUT VOLTAGE (V) 60Hz

File Name:DR-75-SPEC 2004-06-30

Distribuido por:

Rua Jos Rafaelli, 221 - CEP: 04763-280 - So Paulo, SP


Tel: 55 (11)5683-5700 Fax: 55 (11) 5524-2324

You might also like