1-Module 01 Basic & Interface

APNIC IPv6/Routing Workshop Lab
Module 1 Basic Configuration Task for Training Lab Network

Objective: All the workshop lab routers are set to the default configuration and cabling
requirements are prebuild according to the following topology diagram. Participants will be
required to do the necessary configurations as part of a team according to the lab design
specification explained in the presentation section. There are 5 routers (3 core and 2 CPE) in
each team/region. So 4 team will finish 20 routers configuration in several steps throughout the
workshop duration. Workshop instructor will explain how the team will be organized, router
will be allocated and IP address detail to access the lab routers.
Prerequisites: Basic TCP/IP knowledge, Cisco router CLI, Telnet/SSH software etc.
The following will be the common topology and IP address plan used for the labs.
Infra
e1/3
e1/1
e1/1
e1/1
e1/0
fa0/1
e1/1
fa0/8
e1/1
e1/3
e1/3
11
lo 0
172.16.15.8/32
2406:6400::8/128
e1/1
44
e1/1
fa0/0
e1/0
e1/1
172.16.10.76/30
2406:6400:e:31::/64
AS17821
lo 0
172.16.15.11/32
2406:6400::11/128
2 54
172.16.4.0/23
2406:6400:c00::/39
DNS MAIL WWW
lo 0
172.16.15.9/32
2406:6400::9/128
2 58
R9
e1/0
172.16.6.0/23
2406:6400:e00::/39
lo 0
172.16.15.7/32
2406:6400::7/128
fa0/0
r18-CBR3
fa0/1
2 162
161 1
172.16.11.160/30
2406:6400:24::/64
Infra
11
fa0/0
CPE
172.16.26.0/23
2406:6400:d800::/48
e1/1
1 53
e1/0
78 2
Infra
1 57
1 49
fa0/0
77 1
R12
2 50
33
44
fa0/1
fa0/0
172.16.11.128/30
2406:6400:20::/64 r17-CAR3
129 1
2 130
11
fa0/1
fa0/0
fa0/0
172.16.10.56/30
2406:6400:e:22::/64
CPE
R8
e1/0
172.16.10.52/30
2406:6400:e:21::/64
fa0/0
82 2
fa0/1
fa0/0
1 225
226 2
172.16.11.224/30
2406:6400:2c::/64
R11
73 1
11
fa0/8
11
r20-CBR4
11
fa0/1
2 98
172.16.11.96/30
2406:6400:1c::/64
fa0/5
SW2
33
lo 0
172.16.15.10/32
2406:6400::10/128
172.16.10.72/30
2406:6400:e:30::/64
74 2
81 1
r16-CBR2
R6
fa0/0
R7
e1/0
lo 0
172.16.15.6/32
2406:6400::6/128
172.16.24.0/23
2406:6400:c000::/48
1 193
fa0/0
11
fa0/0
lo 0
172.16.15.4/32
2406:6400::4/128
97 1
2 30
172.16.10.48/30
2406:6400:e:20::/64
fa0/0
SW1
2 34
e1/0
R10
r19-CAR4
194 2
fa0/1
fa0/1
fa0/5
fa0/2
11
e1/0
e1/3
11
172.16.10.0/30
2406:6400:e::/64
172.16.10.4/30
2406:6400:e:1::/64
e1/1
e1/0
172.16.10.80/30
2406:6400:e:32::/64
172.16.18.0/23
2406:6400:9800::/48
172.16.12.0/24
2406:6400:2::/48
fa0/11
172.16.11.192/30
2406:6400:28::/64
1 29
22
fa0/11
172.16.28.0/23
2406:6400:e000::/48
11
r15-CAR2
2 66
fa0/1
172.16.22.0/23
2406:6400:b800::/48
62
1 25
fa0/0
fa0/0
1 33
172.16.10.28/30
2406:6400:e:11::/64
R3
10 2
fa0/1
fa0/0
34 2
1 33
172.16.11.32/30
2406:6400:14::/64
lo 0
172.16.15.12/32
2406:6400::12/128
172.16.30.0/23
2406:6400:f800::/48
51
R5
172.16.13.0/24
2406:6400:3::/48
fa0/1
e1/0
2 26
172.16.10.32/30
2406:6400:e:12::/64
R2
11
22
11
fa0/0
lo 0
172.16.15.2/32
2406:6400::2/128
fa0/2
r14-CBR1
lo 0
172.16.15.5/32
2406:6400::5/128
11
172.16.10.8/30
2406:6400:e:2::/64
e1/1
91
lo 0
172.16.15.3/32
2406:6400::3/128
CPE
172.16.11.64/30
2406:6400:18::/64
65 1
e1/0
22
lo 0
172.16.15.1/32
2406:6400::1/128
Infra
R4
11
fa0/0
11
fa0/1
e1/0
22
172.16.2.0/23
2406:6400:a00::/39
fa0/0
11
fa0/0
172.16.0.0/23
2406:6400:800::/39
R1
e1/1
r13-CAR1
172.16.20.0/23
2406:6400:a000::/48
172.16.11.0/30
2406:6400:10::/64
DNS MAIL WWW
172.16.10.24/30
2406:6400:e:10::/64
172.16.16.0/23
2406:6400:8000::/48
CPE
DNS MAIL WWW
DNS MAIL WWW
Figure 1 ISP Lab Basic Configuration
APNIC V2.0
Created: 02 June 2010
Updated: 16 July 2013
nurul/documents/traininglab/
Tuesday, August 27, 2013
Lab Notes
This workshop is intended to be run on a real cisco routers or Dynamips server with the above lab
topologies set up. The routers are using both IPv4 and IPv6 supported IOS software. Participants
should do their workshop module one configuration in several steps as explained below:
1. Standard basic router configuration.
2. Standard interface related configuration for both IPv6 and IPv4.
3. Do necessary verification to make sure you can ping (Both IPv6 & IPv4) your neighbouring
router point-to-point interface and satisfy the requirement to go to the next step.
For time management purpose we will emphasize more on IPv6 protocol when we will do verification
and analysis after each lab exercise. Please notice that some Cisco commands are case sensitive,
already enable by default in some recent IOS version and some are not a mandatory command for
router functionality. But for lab troubleshooting and verification purpose it is strongly recommended
that please do all necessary configuration exactly as it is explained in the instruction. Our objective
after the exercise is to build a template for each participant so that it can be re-used after you go back
to your work environment.
Lab Exercise
1.
Basic Router Configuration: This will set the router with necessary basic configuration used in a
real production router for both enterprise and service provider network.
Example Config on a Router:
config t
To enter into a cisco router global configuration mode.

hostname Router
Router host name which is an FQDN name mapped into a DNS server. There is a common
practice about router hostname which is domain name then 3 digit airline city code then
region/pop then a name etc. Example: router1.pop1reg1.BNE.apnic.net. Please use your router
name according the topology diagram.
ip routing
It recent IOS this command is enable by default. So it can act as a router and start routing IP
packet. To be safe add this command in your template. Need to look for equivalent IPv6
command if any command read IP/L3 header
ipv6 unicast-routing
Even in recent IOS [15.1(4)M3] this command is not enable by default. We must use this
command so that router starts routing IPv6 packet. To be safe add this command in your
template.

ip cef
Enable Cisco (Proprietary) Express Forwarding to process IPv4 packet faster.

ipv6 cef(Distributed)
Enable Cisco (Proprietary) Express Forwarding to process IPv6 packet faster. Some high end
cisco router process packet using line card. Use ipv6 cef distributed instead on those
routers.
no ip domain-lookup
To disable DNS resolver functionality on router if you do not use it. If yes then specify DNS
server IP. There is no equivalent command for IPv6 yet [15.1(4)M3].
no ip http server
To disable HTTP server functionality on a router. Otherwise router is accessible from a

browser and it consumes CPU and memory resources. We normally access router from a CLI.
There is no equivalent command for IPv6 yet [15.1(4)M3].
no ip http secure-server
To disable HTTPS server functionality on a router. Otherwise router is accessible from a

browser and it consumes router CPU and memory resources. We normally access router from
CLI. There is no equivalent command for IPv6 yet [15.1(4)M3].
no ip finger
Finger service can be used to find out which users are logged into a router. Also a special DoS
attack named Finger of death uses the finger service to continuously transmit finger requests
to a given device consuming great amounts of processing resources. Depending of your IOS
version it could be disable by default. To be safe add it in your command template. There is no
equivalent command for IPv6 yet [15.1(4)M3].
no service pad
To disable Packet Assembler/Disassembler (PAD) service, which is used for X.25 networks in
early days. If you do not use it now please disable it.
no service udp-small-servers
no service tcp-small-server
Depending on your cisco IOS version it offer by default small tcp/udp services that are
basically a set of simple services that are used for diagnostic purposes. An attacker could
maliciously use these services to gain system information and even launch Denial of Service
(DoS) attacks to your router.
APNIC V2.0
no ip bootp server
A Cisco router can be configured to act as a BOOTP server and provide IOS software image to
another Cisco network devices. This service could be used by an attacker to download a copy
of a network devices IOS software. There is no equivalent command for IPv6 yet
[15.1(4)M3].
no ip source-route
no ipv6 source-route
An IP source routing function allows the sender of an IP packet to control the route that the
packet will take towards its final destination. Source routing should be disabled when its not
needed because it could be used for various malicious attacks and also very CPU intensive
function.
logging source-interface loopback 0
We need the router use the loopback address as the "source interface" for traffic that is
generated by the router, such as syslog packets, SNMP traps, security related packets. Also
DNS is mapped with the loopback address and FQDN name of the router.
service timestamps log datetime localtime msec show-timezone year
service timestamps debug datetime localtime msec show-timezone year
Router will show either uptime or current date and time on the log it will generate based on the
configuration on your router. We would like to record current date and time in msec unit for
both log and debug messages to facilitate the log analysis if required.
clock timezone AEST 10
Set your router clock according to your local time zone. We used AEST 10 to reflect APNIC
office where it is located and corresponding time zone.
ip subnet-zero
Under old IP subnetting rules, the all 0s subnet was reserved for the network, and the all 1s
subnet was reserved for the broadcast. Over time this idea has been changed and we can use all
0s and all 1s subnet. Depending on your IOS version you might need to enable this on your
cisco router. To be safe add this command in your template. IP subnet-zero concept is not
applicable for IPv6 address family
ip classless
In old days routers are by default classful. Now we are in CIDR era. Depending on your cisco
IOS version this command can be there by default. To be safe add this command in your
template. IP classless concept is not applicable for IPv6 address family.
transport preferred none
By default telnet is the preferred protocol and when we mistyping a command the router will
try to telnet the name we typed. If we set the transport preferred to none the router wont try
to telnet when mistyping and we still can have DNS resolver enabled.

line console 0
logging synchronous
exit
Before the command:
After the command:
ip tcp synwait-time 15
An attacker could flood a router with a high volume of TCP connection requests for which it
does not return back an acknowledgement causing connection queues to fill up at the receiving
host. Setting the TCP Synwait time to 15 seconds for example, will instruct the router to shut
down any incomplete connections after 15 seconds. There is no equivalent command for IPv6
yet [15.1(4)M3].
security authentication failure rate 3 log
Configuring a router to lock access (for about 15 seconds) after three unsuccessful login
attempts. This method protects a router from malicious attack (brute-force attack) and at the
same time a log message is generated warning about the unsuccessful login attempts.
exit
wr
[wr] is an abbreviation or write command. Which will eventually copy (Save) the running
configuration (From RAM) in to the startup-configuration (NVRAM) of cisco router.
END OF STEP ONE
APNIC V2.0
2. Interface Related Configuration: This will set the router with necessary interface related
configuration (IPv6 and IPv4) used in a real production router for both enterprise and service
provider network.
Example IPv4 Config on a Router:
config t
interface e1/0
To go to an interface configuration mode of a cisco router

description ||WAN R3-R2||
It is very important to add a meaningful description of a router interface to explain where this
interface is connected. Otherwise we might be lost finding which interface connects where on a
large data centre and need to jump behind the rack to look for a clue.
no ip redirects
This disables ICMP redirect messages. Redirects function happen when a router recognizes a
packet arriving on an interface and the best route is out that same interface. In that case the
router sends an ICMP redirect back to the source telling them about a better router on the same
subnet. Subsequent packets take the redirected path. This function can be abused by an attacker
who has got access to your layer 2 network to initiate man in the middle attack. Need to look
for equivalent command for IPv6
no ip directed-broadcast
Every subnet in IPv4 has a broadcast address. If any packet arrives on a router with broadcast
address as destination the router will amplify L2 frame on that interface. Any network attacker
can initiate a traffic amplification attack in your LAN if directed broadcast is not disable on
that Interface. Broadcast concept is not applicable in IPv6.
no ip unreachables
From a security point of view some one can initiate reconnaissance attack on a device and if
you want to minimize the amount of information that the device can provides about itself to
others this command is very useful. It also protect the router from the un wanted resource
utilization on the device.
ip address 172.16.15.3 255.255.255.255
Assign IP address on a cisco router interface.

no shutdown
Cisco router interface is disable by default. Use this command to activate the interface to start
processing IP packet.
Example IPv6 Config on a Router:

config t
interface loopback 0
ipv6 enable (Optional)
IPv6 enable command is only required if your router has only link local address but no global
address will be configured.
ipv6 address 2406:6400:0000:0000::3/128
Please notice the [Network Prefix::Interface ID] part of the IPv6 global address configured on
the interface. In this case interface is configured with static address and double colon is
perfectly sitting in between.
interface e1/0
ipv6 address 2406:6400:000E:0001::2/64
interface e1/1
ipv6 address 2406:6400:000E:0002::2/64
interface fa0/0
ipv6 address 2406:6400:0014:0000::1/64
exit
exit
wr
END OF STEP TWO

3. Verify the neighbouring interface configuration:
Example IPv4 protocol verification on a Router:
ping 172.16.10.5
ping 172.16.10.9
[!!!!!]
[!!!!!]
You need to replace the destination IPv4 address with your relevant interface IPv4 address.
Please look at the topology diagram on page 1 for further detail.
Example IPv6 protocol verification on a Router:
ping 2406:6400:000E:0000::1
ping 2406:6400:000E:0002::2
[!!!!!]
[!!!!!]
You need to replace the destination IPv6 address with your relevant interface IPv6 address.
Please look at the topology diagram on page 1 for further detail.
END OF MODULE ONE
Next pages for reference template used on different routers.
APNIC V2.0
Workshop templates for reference purpose only
Infra
CPE
172.16.11.0/30
2406:6400:10::/64
fa0/5
fa0/2
e1/1
e1/3
2 30
fa0/5
SW2
fa0/8
R10
1 193
fa0/0
fa0/8
194 2
fa0/1
SW1
fa0/11
e1/0
e1/0
fa0/11
11
fa0/1
172.16.12.0/24
2406:6400:2::/48
e1/0
Basic r19-CAR4
Conf Router1:
1 29
22
62
172.16.11.192/30
2406:6400:28::/64
1 25
fa0/0
11
11
172.16.10.4/30
2406:6400:e:1::/64
R3
10 2
fa0/1
fa0/0
34 2
1 33
172.16.11.32/30
2406:6400:14::/64
e1/0
e1/3
11
172.16.10.0/30
2406:6400:e::/64
e1/1
172.16.10.8/30
2406:6400:e:2::/64
e1/1
11
fa0/0
fa0/1
51
R5
172.16.13.0/24
2406:6400:3::/48
e1/0
fa0/1
e1/3
e1/1
fa0/0
44
11
e1/3
e1/0
e1/1
172.16.10.72/30
2406:6400:e:30::/64
172.16.10.76/30
2406:6400:e:31::/64
e1/1
172.16.10.80/30
2406:6400:e:32::/64
e1/0
2 50
172.16.10.52/30
2406:6400:e:21::/64
11
e1/1
33
172.16.10.48/30
2406:6400:e:20::/64
fa0/0
config
t
74 2
hostname Router1 81 1
ip routing lo 0
172.16.15.10/32
2406:6400::10/128
R11
ip cef
R8
33
44
ipv6 cef
1 49
73 1
fa0/1
no ip domain-lookup
fa0/0
1 53
77 1
no ip http server
lo 0
172.16.15.12/32
AS17821
no ip finger
2406:6400::12/128
lo 0
lo 0
no service pad
172.16.15.8/32
172.16.15.11/32
2406:6400::8/128
2406:6400::11/128
82
2
no service
udp-small-servers
r20-CBR4
R12
11
no service
tcp-small-server
fa0/1
fa0/0
e1/0
fa0/0
1 225
226 2
78 2
no ip bootp
server
172.16.11.224/30
2406:6400:2c::/64
no ipCPE
source-route
Infra
172.16.6.0/27
172.16.4.0/27
2406:6400:0e00:0000::/64
2406:6400:0c00:0000::/64
DNS MAIL WWW
DNS MAIL WWW
service timestamps debug datetime
localtime msec show-timezone year
ip subnet-zero
ip classless
line console 0
logging synchronous
exit
exit
wr
172.16.30.0/27
2406:6400:f800:0001::/64
e1/0
2 26
172.16.10.28/30
2406:6400:e:11::/64
r14-CBR1
R2
11
22
lo 0
172.16.15.3/32
2406:6400::3/128
lo 0
172.16.15.5/32
2406:6400::5/128
lo 0
172.16.15.2/32
2406:6400::2/128
11
172.16.18.0/27
2406:6400:9800:0001::/64
e1/0
22
91
fa0/2
172.16.28.0/27
2406:6400:e000:0001::/64
R1
11
fa0/0
lo 0
172.16.15.1/32
2406:6400::1/128
172.16.2.0/27
2406:6400:0a00:0000::/64
fa0/0
fa0/1
172.16.0.0/27
2406:6400:0800:0000::/64
e1/0
22
DNS MAIL WWW
e1/1
r13-CAR1
11
fa0/0
DNS MAIL WWW
172.16.10.24/30
2406:6400:e:10::/64
172.16.16.0/27
2406:6400:8000:0001::/64
Standard router configuration for training ISP network Region1:
e1/0
2 54
Basic Conf Router2:

config t
hostname Router2
ip routing
ip cef
ipv6 cef
no ip domain-lookup
no ip http server
no ip finger
no service pad
no ip bootp server
no ip source-route
ip subnet-zero
ip classless
line console 0
logging synchronous
exit
exit
wr
Basic Conf Router3:

config t
hostname Router3
ip routing
ip cef
ipv6 cef
no ip domain-lookup
no ip http server
no ip finger
no service pad
no ip bootp server
no ip source-route
ip subnet-zero
ip classless
line console 0
logging synchronous
APNIC V2.0

exit
exit
wr
10

DNS MAIL WWW
CPE
172.16.11.64/30
2406:6400:18::/64
R4
65 1
e1/3
e1/0
1 29
lo 0
172.16.15.6/32
2406:6400::6/128
e1/1
fa0/1
lo 0
172.16.15.4/32
2406:6400::4/128
2 34
r16-CBR2
R6
fa0/1
2 98
97 1
172.16.11.96/30
2406:6400:1c::/64
fa0/0
e1/0
2 30
11
fa0/0
fa0/5
fa0/8
R7
172.16.10.48/30
2406:6400:e:20::/64
fa0/11
Basic Conf Router4

e1/0
172.16.11.128/30
2406:6400:20::/64 r17-CAR3
129 1
2 130
11
fa0/1
fa0/0
fa0/0
172.16.24.0/27
2406:6400:c000:0001::/64
SW2
172.16.22.0/27
2406:6400:b800:0001::/64
e1/1
22
172.16.12.0/24
2406:6400:2::/48
172.16.10.28/30
2406:6400:e:11::/64
22
11
fa0/0
e1/1
1 25
fa0/0
r15-CAR2
2 66
fa0/1
1 33
172.16.10.32/30
2406:6400:e:12::/64
R5
11
172.16.13.0/24
2406:6400:3::/48
172.16.10.24/30
2406:6400:e:10::/64
lo 0
172.16.15.5/32
2406:6400::5/128
e1/0
2 26
fa0/0
172.16.20.0/27
2406:6400:a000:0001::/64
Infra
172.16.2.0/27
2406:6400:0a00:0000::/64
fa0/2
fa0/1
e1/0
e1/1
e1/1
e1/1
172.16.26.0/27
2406:6400:d800:0001::/64
e1/3
172.16.10.56/30
2406:6400:e:22::/64
11
172.16.10.52/30
2406:6400:e:21::/64
2 50
config t
1 57
hostname Router4
lo 0
ip routing
172.16.15.7/32
2406:6400::7/128
R8
ip cef
33
ipv6 cef
1 49
fa0/0
no ip domain-lookup
1 53
no ip http server
lo 0
172.16.15.9/32
no ip finger
2406:6400::9/128
0
no service lopad
172.16.15.8/32
no service
udp-small-servers
2 58
2406:6400::8/128
r18-CBR3
R9
11
fa0/0
fa0/1
e1/0
fa0/0
no ip bootp server
2 162
161 1
2 54
172.16.11.160/30
no ip source-route
2406:6400:24::/64
CPE
Infra
172.16.4.0/27
2406:6400:0c00:0000::/64
logging source-interface
loopback 0
Training Lab Topology
service timestamps debug datetime localtime msec show-timezone
year
!!!!"!APNIC Training
DNS MAIL WWW
Created: 25/09/2009
Last update: 06/05/2011
ip subnet-zero
ip classless
line console 0
logging synchronous
exit
exit
wr
33
AS17821
11
APNIC V2.0
Basic Conf Router5

config t
hostname Router5
ip routing
ip cef
ipv6 cef
no ip domain-lookup
no ip http server
no ip finger
no service pad
no ip bootp server
no ip source-route
ip subnet-zero
ip classless
line console 0
logging synchronous
exit
exit
wr
Basic Conf Router6

config t
hostname Router6
ip routing
ip cef
ipv6 cef
no ip domain-lookup
no ip http server
no ip finger
no service pad
no ip bootp server
no ip source-route
ip subnet-zero
ip classless
line console 0
logging synchronous
12

exit
exit
wr
13
APNIC V2.0
e1/1
2 34
r16-CBR2
R6
fa0/1
2 98
172.16.11.96/30
2406:6400:1c::/64
fa0/0
e1/
e1/0
97 1
2 30
11
fa0/0
172.16.22.0/27
2406:6400:b800:0001::/64
fa0/
72.16.10.28/30
6:6400:e:11::/64
fa0/2

fa0/5
SW2
fa0/8
R7
e1/0
1 57
e1/1
fa0/1
R8
2 50
172.16.10.56/30
2406:6400:e:22::/64
33
172.16.12.0/24
2406:6400:2::/48
172.16.10.48/30
2406:6400:e:20::/64
fa0/11
172.16.13.0/24
2406:6400:3::/48
e1/0
33
1 49
fa0/0
e1/1
R9
fa0/0
r18-CBR3
fa0/1
2 162
161 1
172.16.11.160/30
2406:6400:24::/64
e1/3
2 54
Basic Conf Router7:
lo 0
172.16.15.9/32
2406:6400::9/128
2 58
e1/0
172.16.4.0/27
2406:6400:0c00:0000::/64
lo 0
172.16.15.7/32
2406:6400::7/128
Infra
11
fa0/0
CPE
172.16.26.0/27
2406:6400:d800:0001::/64
172.16.10.52/30
2406:6400:e:21::/64
e1/1
1 53
11
lo 0
172.16.15.8/32
2406:6400::8/128
172.16.11.128/30
2406:6400:20::/64 r17-CAR3
129 1
2 130
11
fa0/1
fa0/0
fa0/0
172.16.24.0/27
2406:6400:c000:0001::/64
172.16.15.6/32
2406:6400::6/128
DNS MAIL WWW
config t
hostname Router7
ip routing
ip cef
ipv6 cef
no ip domain-lookup
no ip http server
no ip finger
no service pad
no ip bootp server
no ip source-route
ip subnet-zero
ip classless
line console 0
logging synchronous
exit
exit
wr
14
Basic Conf Router8:

config t
hostname Router8
ip routing
ip cef
ipv6 cef
no ip domain-lookup
no ip http server
no ip finger
no service pad
no ip bootp server
no ip source-route
ip subnet-zero
ip classless
line console 0
logging synchronous
exit
exit
wr
Basic Conf Router9:

config t
hostname Router9
ip routing
ip cef
ipv6 cef
no ip domain-lookup
no ip http server
no ip finger
no service pad
no ip bootp server
no ip source-route
ip subnet-zero
ip classless
line console 0
logging synchronous
15
APNIC V2.0

exit
exit
wr
16
fa0/1
fa0/0
34 2
1 33
172.16.11.32/30
2406:6400:14::/64
fa0/1
11
e1/1
e1/0
62
R10
1 193
fa0/0
fa0/0
CPE
fa0/1
fa0/0
1 225
226 2
172.16.11.224/30
2406:6400:2c::/64
fa0/0
44
e1/0
e1/1
172.16.10.80/30
2406:6400:e:32::/64
82 2
44
33
fa0/0
11
e1/3
e1/1
77 1
R12
R8
172.16.13.0/24
2406:6400:3::/48
fa0/1
73 1
e1/1
r20-CBR4
11
R11
fa0/8
11
lo 0
172.16.15.12/32
2406:6400::12/128
172.16.10.72/30
2406:6400:e:30::/64
74 2
81 1
lo 0
172.16.15.10/32
2406:6400::10/128
172.16.12.0/24
2406:6400:2::/48
e1/0
172.16.10.76/30
2406:6400:e:31::/64
fa0/0
194 2
fa0/1
fa0/5
SW2
e1/3
r19-CAR4
fa0/8
fa0/11
172.16.11.192/30
2406:6400:28::/64
11
SW1
33
172.16.30.0/27
2406:6400:f800:0001::/64
fa0/2
fa0/11
172.16.28.0/27
2406:6400:e000:0001::/64
fa0/1
R3
10 2
22
fa0/5
11
fa0/0
fa0/0
172.16.10.4/30
2406:6400:e:1::/64
172.
2406:6
e1/1
r14-CBR1
11
fa0/2
172.16.18.0/27
2406:6400:9800:0001::/64
51
22
lo 0
172.16.15.3/32
2406:6400::3/128
lo 0
172.16.15.11/32
2406:6400::11/128
lo 0
172.16.15.8/32
2406:6400::8/128
e1/0
78 2
Infra
172.16.6.0/27
2406:6400:0e00:0000::/64
172.16.4
2406:6400:0c0
DNS MAIL WWW
DNS MAIL
Basic Conf Router10:

config t
hostname Router10
ip routing
ip cef
ipv6 cef
no ip domain-lookup
no ip http server
no ip finger
no service pad
no ip bootp server
no ip source-route
ip subnet-zero
ip classless
line console 0
logging synchronous
exit
exit
wr
17
APNIC V2.0

config t
hostname Router11
ip routing
ip cef
ipv6 cef
no ip domain-lookup
no ip http server
no ip finger
no service pad
no ip bootp server
no ip source-route
ip subnet-zero
ip classless
line console 0
logging synchronous
exit
exit
wr

config t
hostname Router12
ip routing
ip cef
ipv6 cef
no ip domain-lookup
no ip http server
no ip finger
no service pad
no ip bootp server
no ip source-route
ip subnet-zero
ip classless
18

line console 0
logging synchronous
exit
exit
wr
19
APNIC V2.0
Interface configuration of training ISP network Region 1:
Infra
CPE
fa0/1
fa0/0
34 2
1 33
172.16.11.32/30
2406:6400:14::/64
e1/3
11
22
172.16.12.0/24
2406:6400:2::/48
e1/0
62
fa0/2
SW1
fa0/11
172.16.11.192/30
IPv4 Interface2406:6400:28::/64
Conf Router1:
fa0/8
fa0/0
44
R8
33
fa0/0
11
e1/3
e1/0
e1/1
172.16.10.72/30
2406:6400:e:30::/64
172.16.10.76/30
2406:6400:e:31::/64
e1/1
172.16.10.80/30
2406:6400:e:32::/64
e1/1
172.16.30.0/27
2406:6400:f800:0001::/64
fa0/8
fa0/11
194 2
1 193
config
t
e1/0
fa0/0
fa0/1
fa0/0
74 2
81 1
description Router1 Loopback
no ip redirects
lo 0
172.16.15.10/32
2406:6400::10/128
no ip unreachables
R11
ip address 172.16.15.1 255.255.255.255
44
no shutdown
73 1
fa0/1
interface e1/0
77 1
description WAN R1-R2
lo 0
no ip redirects
172.16.15.12/32
2406:6400::12/128
lo 0
no ip unreachables
172.16.15.11/32
ip address 172.16.10.2
255.255.255.252
2406:6400::11/128
82 2
r20-CBR4
R12
no shutdown
11
fa0/1
fa0/0
e1/0
interface
e1/1
fa0/0
1 225
226 2
78 2
description 172.16.11.224/30
WAN R1-R3
2406:6400:2c::/64
no ip CPE
redirects
Infra
172.16.6.0/27
2406:6400:0e00:0000::/64
no ip unreachables
ip address 172.16.10.9 255.255.255.252
no shutdown
DNS MAIL WWW
exit
exit
wr
Verify point-to-point connectivity:

ping 172.16.10.1
ping 172.16.10.10
fa0/5
SW2
R10
r19-CAR4
11
fa0/0
11
fa0/5
R3
10 2
R5
172.16.13.0/24
2406:6400:3::/48
fa0/1
51
172.16.10.4/30
2406:6400:e:1::/64
11
fa0/0
11
172.16.10.0/30
2406:6400:e::/64
e1/1
r14-CBR1
R2
11
e1/1
lo 0
172.16.15.3/32
2406:6400::3/128
lo 0
172.16.15.5/32
2406:6400::5/128
lo 0
172.16.15.2/32
2406:6400::2/128
fa0/2
172.16.18.0/27
2406:6400:9800:0001::/64
lo 0
172.16.15.1/32
2406:6400::1/128
172.16.28.0/27
2406:6400:e000:0001::/64
e1/0
22
91
fa0/0
fa0/1
17
2406:640
R1
11
fa0/0
e1/0
22
DNS
172.16.0.0/27
2406:6400:0800:0000::/64
e1/1
r13-CAR1
11
fa0/0
172.16.11.0/30
2406:6400:10::/64
172.16.10.8/30
2406:6400:e:2::/64
172.16.16.0/27
2406:6400:8000:0001::/64
DNS MAIL WWW
[!!!!!]
[!!!!!]
20
AS17821
lo 0
172.16.15.8/32
2406:6400::8/128
17
2406:640
DNS
IPv6 Interface Conf Router1:

config t
ipv6 address 2406:6400:0000:0000::1/128
interface e1/0
ipv6 address 2406:6400:000E:0000::2/64
interface e1/1
ipv6 address 2406:6400:000E:0002::1/64
exit
exit
wr

ping 2406:6400:000E:0000::1
ping 2406:6400:000E:0002::2
[!!!!!]
[!!!!!]

config t
no ip redirects
no ip unreachables
ip address 172.16.15.2 255.255.255.255
no shutdown
interface e1/0
no ip redirects
no ip unreachables
ip address 172.16.10.1 255.255.255.252
no shutdown
interface e1/1
no ip redirects
no ip unreachables
ip address 172.16.10.5 255.255.255.252
no shutdown
interface fa0/0
description Purple Transport Link
no ip redirects
no ip unreachables
ip address 172.16.12.1 255.255.255.0
no shutdown
interface fa0/1
description Green Transport Link
no ip redirects
no ip unreachables
ip address 172.16.13.1 255.255.255.0
no shutdown
interface e1/3
description Router2 DC net
no ip redirects
21
APNIC V2.0
no ip unreachables
ip address 172.16.0.1 255.255.255.224
no shutdown
exit
exit
wr

ping 172.16.10.2
ping 172.16.10.6
[!!!!!]
[!!!!!]
Verify transport link:

ping
ping
ping
ping
ping
ping
172.16.12.2
172.16.12.3
172.16.12.4
172.16.13.2
172.16.13.3
172.16.13.4
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]

config t
ipv6 address 2406:6400:0000:0000::2/128
interface e1/0
ipv6 address 2406:6400:000E:0000::1/64
interface e1/1
ipv6 address 2406:6400:000E:0001::1/64
interface fa0/0
ipv6 address 2406:6400:0002:0000::1/48
interface fa0/1
ipv6 address 2406:6400:0003:0000::1/48
interface e1/3
ipv6 address 2406:6400:0800:0000::1/64
exit
exit
wr

ping 2406:6400:000E:0000::2
ping 2406:6400:000E:0001::2
[!!!!!]
[!!!!!]

ping
ping
ping
ping
ping
ping
2406:6400:0002:0000::2
2406:6400:0002:0000::3
2406:6400:0002:0000::4
2406:6400:0003:0000::2
2406:6400:0003:0000::3
2406:6400:0003:0000::4
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]
22

config t
no ip redirects
no ip unreachables
ip address 172.16.15.3 255.255.255.255
no shutdown
interface e1/0
no ip redirects
no ip unreachables
ip address 172.16.10.6 255.255.255.252
no shutdown
interface e1/1
no ip redirects
no ip unreachables
ip address 172.16.10.10 255.255.255.252
no shutdown
exit
exit
wr

ping 172.16.10.5
ping 172.16.10.9
[!!!!!]
[!!!!!]

config t
ipv6 address 2406:6400:0000:0000::3/128
interface e1/0
ipv6 address 2406:6400:000E:0001::2/64
interface e1/1
ipv6 address 2406:6400:000E:0002::2/64
exit
exit
wr

ping 2406:6400:000E:0001::1 [!!!!!]
ping 2406:6400:000E:0002::1 [!!!!!]
23
APNIC V2.0

DNS MAIL WWW
CPE
172.16.11.64/30
2406:6400:18::/64
R4
65 1
e1/3
e1/0
e1/1
1 25
fa0/0
1 29
lo 0
172.16.15.6/32
2406:6400::6/128
e1/1
fa0/1
lo 0
172.16.15.4/32
2406:6400::4/128
2 34
r16-CBR2
R6
fa0/1
2 98
97 1
172.16.11.96/30
2406:6400:1c::/64
fa0/0
e1/0
2 30
11
fa0/0
fa0/5
fa0/8
R7
172.16.10.48/30
2406:6400:e:20::/64
fa0/11
IPv4 Interface Conf Router4

e1/0
172.16.11.128/30
2406:6400:20::/64 r17-CAR3
129 1
2 130
11
fa0/1
fa0/0
fa0/0
2 50
172.16.24.0/27
2406:6400:c000:0001::/64
SW2
172.16.22.0/27
2406:6400:b800:0001::/64
e1/1
22
172.16.12.0/24
2406:6400:2::/48
172.16.10.28/30
2406:6400:e:11::/64
22
11
fa0/0
1 33
172.16.10.32/30
2406:6400:e:12::/64
R5
11
172.16.13.0/24
2406:6400:3::/48
172.16.10.24/30
2406:6400:e:10::/64
lo 0
172.16.15.5/32
2406:6400::5/128
e1/0
2 26
r15-CAR2
2 66
fa0/1
fa0/0
172.16.20.0/27
2406:6400:a000:0001::/64
Infra
172.16.2.0/27
2406:6400:0a00:0000::/64
fa0/2
fa0/1
e1/0
e1/1
e1/1
e1/1
172.16.26.0/27
2406:6400:d800:0001::/64
e1/3
172.16.10.56/30
2406:6400:e:22::/64
11
172.16.10.52/30
2406:6400:e:21::/64
1 57
config t
lo 0
172.16.15.7/32
2406:6400::7/128
no ip redirects
R8
33
1 49
no ip unreachables
fa0/0
1 53
ip address 172.16.15.4 255.255.255.255
no shutdown
lo 0
interface e1/0
172.16.15.9/32
2406:6400::9/128
descriptionlo 0WAN R4-R5
172.16.15.8/32
no ip redirects
2 58
2406:6400::8/128
r18-CBR3
R9
11
fa0/0
fa0/1
e1/0
no ip unreachables
fa0/0
2 162
161 1
2 54
172.16.11.160/30
ip address 172.16.10.26 255.255.255.252
2406:6400:24::/64
CPE
Infra
no shutdown
172.16.4.0/27
interface e1/1 2406:6400:0c00:0000::/64
Training Lab Topology
no ip redirects DNS MAIL WWW
!!!!"!APNIC Training
Created: 25/09/2009
Last update: 06/05/2011
no ip unreachables
ip address 172.16.10.33 255.255.255.252
no shutdown
exit
exit
wr
33
AS17821

ping 172.16.10.25
ping 172.16.10.34
[!!!!!]
[!!!!!]
24

config t
ipv6 address 2406:6400:0000:0000::4/128
interface e1/0
ipv6 address 2406:6400:000E:0010::2/64
interface e1/1
ipv6 address 2406:6400:000E:0012::1/64
exit
exit
wr

ping 2406:6400:000E:0010::1
ping 2406:6400:000E:0012::2
[!!!!!]
[!!!!!]
IPV4 Interface Conf Router5:

config t
no ip redirects
no ip unreachables
ip address 172.16.15.5 255.255.255.255
no shutdown
interface e1/0
no ip redirects
no ip unreachables
ip address 172.16.10.25 255.255.255.252
no shutdown
interface e1/1
no ip redirects
no ip unreachables
ip address 172.16.10.29 255.255.255.252
no shutdown
interface fa0/0
no ip redirects
no ip unreachables
ip address 172.16.12.2 255.255.255.0
no shutdown
interface fa0/1
no ip redirects
no ip unreachables
ip address 172.16.13.2 255.255.255.0
no shutdown
interface e1/3
no ip redirects
25
APNIC V2.0
no ip unreachables
ip address 172.16.2.1 255.255.255.224
no shutdown
exit
exit
wr

ping 172.16.10.26
ping 172.16.10.30
[!!!!!]
[!!!!!]

ping
ping
ping
ping
ping
ping
172.16.12.1
172.16.12.3
172.16.12.4
172.16.13.1
172.16.13.3
172.16.13.4
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]

config t
ipv6 address 2406:6400:0000:0000::5/128
interface e1/0
ipv6 address 2406:6400:000E:0010::1/64
interface e1/1
ipv6 address 2406:6400:000E:0011::1/64
interface fa0/0
ipv6 address 2406:6400:0002:0000::2/48
interface fa0/1
ipv6 address 2406:6400:0003:0000::2/48
interface e1/3
ipv6 address 2406:6400:0A00:0000::1/64
exit
exit
wr

ping 2406:6400:000E:0010::2
ping 2406:6400:000E:0011::2
[!!!!!]
[!!!!!]

ping
ping
ping
ping
ping
ping
2406:6400:0002:0000::1
2406:6400:0002:0000::3
2406:6400:0002:0000::4
2406:6400:0003:0000::1
2406:6400:0003:0000::3
2406:6400:0003:0000::4
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]
26

config t
no ip redirects
no ip unreachables
ip address 172.16.15.6 255.255.255.255
no shutdown
interface e1/0
no ip redirects
no ip unreachables
ip address 172.16.10.30 255.255.255.252
no shutdown
interface e1/1
no ip redirects
no ip unreachables
ip address 172.16.10.34 255.255.255.252
no shutdown
exit
exit
wr

ping 172.16.10.29
ping 172.16.10.33
[!!!!!]
[!!!!!]

config t
ipv6 address 2406:6400:0000:0000::6/128
interface e1/0
ipv6 address 2406:6400:000E:0011::2/64
interface e1/1
ipv6 address 2406:6400:000E:0012::2/64
exit
exit
wr

ping 2406:6400:000E:0011::1
ping 2406:6400:000E:0012::1
[!!!!!]
[!!!!!]
27
APNIC V2.0
e1/1
2 34
R6
r16-CBR2
fa0/1
fa0/0
2 98
97 1
172.16.11.96/30
2406:6400:1c::/64
e1/1
e1/0
2 30
11
fa0/0

fa0/5
fa0/8
R7
e1/0
1 57
e1/1
fa0/1
R8
2 50
172.16.10.56/30
2406:6400:e:22::/64
33
172.16.12.0/24
2406:6400:2::/48
172.16.10.48/30
2406:6400:e:20::/64
fa0/11
172.16.13.0/24
2406:6400:3::/48
e1/0
33
1 49
fa0/0
e1/1
e1/3
lo 0
172.16.15.9/32
2406:6400::9/128
2 58
R9
fa0/0
e1/0
2 54
172.16.4.0/27
2406:6400:0c00:0000::/64
lo 0
172.16.15.7/32
2406:6400::7/128
fa0/1
2 162
161 1
172.16.11.160/30
2406:6400:24::/64
Infra
DNS MAIL WWW

config t
no ip redirects
no ip unreachables
ip address 172.16.15.7 255.255.255.255
no shutdown
interface e1/0
no ip redirects
no ip unreachables
ip address 172.16.10.50 255.255.255.252
no shutdown
interface e1/1
no ip redirects
no ip unreachables
ip address 172.16.10.57 255.255.255.252
no shutdown
exit
exit
wr

ping 172.16.10.49
ping 172.16.10.58
r18-CBR3
[!!!!!]
[!!!!!]
28
11
fa0/0
CPE
172.16.26.0/27
2406:6400:d800:0001::/64
172.16.10.52/30
2406:6400:e:21::/64
11
e1/1
1 53
lo 0
172.16.15.8/32
2406:6400::8/128
172.16.11.128/30
2406:6400:20::/64 r17-CAR3
129 1
2 130
11
fa0/1
fa0/0
fa0/0
172.16.24.0/27
2406:6400:c000:0001::/64
SW2
172.16.22.0/27
2406:6400:b800:0001::/64
fa0/1
30
::/64
172.16.10.28/30
2406:6400:e:11::/64
22
fa0/2
lo 0
172.16.15.6/32
2406:6400::6/128

config t
ipv6 address 2406:6400:0000:0000::7/128
interface e1/0
ipv6 address 2406:6400:000E:0020::2/64
interface e1/1
ipv6 address 2406:6400:000E:0022::1/64
exit
exit
wr

ping 2406:6400:000E:0020::1
ping 2406:6400:000E:0022::2
[!!!!!]
[!!!!!]

config t
no ip redirects
no ip unreachables
ip address 172.16.15.8 255.255.255.255
no shutdown
interface e1/0
no ip redirects
no ip unreachables
ip address 172.16.10.49 255.255.255.252
no shutdown
interface e1/1
no ip redirects
no ip unreachables
ip address 172.16.10.53 255.255.255.252
no shutdown
interface fa0/0
no ip redirects
no ip unreachables
ip address 172.16.12.3 255.255.255.0
no shutdown
interface fa0/1
no ip redirects
no ip unreachables
ip address 172.16.13.3 255.255.255.0
no shutdown
interface e1/3
no ip redirects
29
APNIC V2.0
no ip unreachables
ip address 172.16.4.1 255.255.255.224
no shutdown
exit
exit
wr

ping 172.16.10.50
ping 172.16.10.54
[!!!!!]
[!!!!!]

ping
ping
ping
ping
ping
ping
172.16.12.1
172.16.12.2
172.16.12.4
172.16.13.1
172.16.13.2
172.16.13.4
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]

config t
ipv6 address 2406:6400:0000:0000::8/128
interface e1/0
ipv6 address 2406:6400:000E:0020::1/64
interface e1/1
ipv6 address 2406:6400:000E:0021::1/64
ipv6 enable
interface fa0/0
ipv6 address 2406:6400:0002:0000::3/48
interface fa0/1
ipv6 address 2406:6400:0003:0000::3/48
interface e1/3
ipv6 address 2406:6400:0C00:0000::1/64
exit
exit
wr

ping 2406:6400:000E:0020::2
ping 2406:6400:000E:0021::2
[!!!!!]
[!!!!!]

ping
ping
ping
ping
ping
ping
2406:6400:0002:0000::1
2406:6400:0002:0000::2
2406:6400:0002:0000::4
2406:6400:0003:0000::1
2406:6400:0003:0000::2
2406:6400:0003:0000::4
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]
30

config t
no ip redirects
no ip unreachables
ip address 172.16.15.9 255.255.255.255
no shutdown
interface e1/0
no ip redirects
no ip unreachables
ip address 172.16.10.54 255.255.255.252
no shutdown
interface e1/1
no ip redirects
no ip unreachables
ip address 172.16.10.58 255.255.255.252
no shutdown
exit
exit
wr

ping 172.16.10.57
ping 172.16.10.53
[!!!!!]
[!!!!!]

config t
ipv6 address 2406:6400:0000:0000::9/128
interface e1/0
ipv6 address 2406:6400:000E:0021::2/64
interface e1/1
ipv6 address 2406:6400:000E:0022::2/64
exit
exit
wr

ping 2406:6400:000E:0021::1
ping 2406:6400:000E:0022::1
[!!!!!]
[!!!!!]
31
APNIC V2.0
fa0/1
fa0/0
34 2
1 33
172.16.11.32/30
2406:6400:14::/64
62
fa0/
fa0/5
R3
10 2
e1/
172.16.10.4/3
2406:6400:e:1::
e1/1
172.16.18.0/27
2406:6400:9800:0001::/64
11
fa0/0
fa0/2
Tuesday,r14-CBR1
August 27, 2013
2406:6400::3/128
e1/0
R10
r19-CAR4
1 193
fa0/0
172.16.12.0/24
2406:6400:2::/48
fa0/0
CPE
fa0/0
e1/1
82 2
fa0/1
fa0/0
1 225
226 2
172.16.11.224/30
2406:6400:2c::/64
44
R12
fa0/1
R8
33
fa0/0
11
e1/1
fa0/8
e1/3
lo 0
172.16.15.11/32
2406:6400::11/128
lo 0
172.16.15.8/32
2406:6400::8/128
e1/0
78 2
Infra
172.16.6.0/27
2406:6400:0e00:0000::/64
DNS MAIL WWW

config t
no ip redirects
no ip unreachables
ip address 172.16.15.10 255.255.255.255
no shutdown
interface e1/0
no ip redirects
no ip unreachables
ip address 172.16.10.74 255.255.255.252
no shutdown
interface e1/1
no ip redirects
no ip unreachables
ip address 172.16.10.81 255.255.255.252
no shutdown
exit
exit
wr

ping 172.16.10.73
ping 172.16.10.82
fa0/5
SW2
172.16.13.0/24
2406:6400:3::/48
77 1
172.16.10.76/30
2406:6400:e:31::/64
r20-CBR4
11
R11
73 1
e1/1
lo 0
172.16.15.12/32
2406:6400::12/128
172.16.10.80/30
2406:6400:e:32::/64
lo 0
172.16.15.10/32
2406:6400::10/128
44
74 2
81 1
e1/0
e1/0
172.16.10.72/30
2406:6400:e:30::/64
fa0/0
194 2
fa0/1
fa0/8
fa0/11
172.16.11.192/30
2406:6400:28::/64
11
SW1
33
172.16.30.0/27
2406:6400:f800:0001::/64
fa0/2
fa0/11
172.16.28.0/27
2406:6400:e000:0001::/64
[!!!!!]
[!!!!!]
32
172.
2406:6400
DNS

config t
ipv6 address 2406:6400:0000:0000::10/128
interface e1/0
ipv6 address 2406:6400:000E:0030::2/64
interface e1/1
ipv6 address 2406:6400:000E:0032::1/64
exit
exit
wr

ping 2406:6400:000E:0030::1
ping 2406:6400:000E:0032::2
[!!!!!]
[!!!!!]

config t
no ip redirects
no ip unreachables
ip address 172.16.15.11 255.255.255.255
no shutdown
interface e1/0
no ip redirects
no ip unreachables
ip address 172.16.10.73 255.255.255.252
no shutdown
interface e1/1
no ip redirects
no ip unreachables
ip address 172.16.10.77 255.255.255.252
no shutdown
interface fa0/0
no ip redirects
no ip unreachables
ip address 172.16.12.4 255.255.255.0
no shutdown
interface fa0/1
no ip redirects
no ip unreachables
ip address 172.16.13.4 255.255.255.0
no shutdown
interface e1/3
no ip redirects
33
APNIC V2.0
no ip unreachables
ip address 172.16.6.1 255.255.255.224
no shutdown
exit
exit
wr

ping 172.16.10.74
ping 172.16.10.78
[!!!!!]
[!!!!!]

ping
ping
ping
ping
ping
ping
172.16.12.1
172.16.12.2
172.16.12.3
172.16.13.1
172.16.13.2
172.16.13.3
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]

config t
ipv6 address 2406:6400:0000:0000::11/128
interface e1/0
ipv6 address 2406:6400:000E:0030::1/64
interface e1/1
ipv6 address 2406:6400:000E:0031::1/64
interface fa0/0
ipv6 address 2406:6400:0002:0000::4/48
interface fa0/1
ipv6 address 2406:6400:0003:0000::4/48
interface e1/3
ipv6 address 2406:6400:0E00:0000::1/64
exit
exit
wr

ping 2406:6400:000E:0030::2
ping 2406:6400:000E:0031::2
[!!!!!]
[!!!!!]

ping
ping
ping
ping
ping
ping
2406:6400:0002:0000::1
2406:6400:0002:0000::2
2406:6400:0002:0000::3
2406:6400:0003:0000::1
2406:6400:0003:0000::2
2406:6400:0003:0000::3
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]
[!!!!!]
34

config t
no ip redirects
no ip unreachables
ip address 172.16.15.12 255.255.255.255
no shutdown
interface e1/0
no ip redirects
no ip unreachables
ip address 172.16.10.78 255.255.255.252
no shutdown
interface e1/1
no ip redirects
no ip unreachables
ip address 172.16.10.82 255.255.255.252
no shutdown
exit
exit
wr

ping 172.16.10.81
ping 172.16.10.77
[!!!!!]
[!!!!!]

config t
ipv6 address 2406:6400:0000:0000::12/128
interface e1/0
ipv6 address 2406:6400:000E:0031::2/64
interface e1/1
ipv6 address 2406:6400:000E:0032::2/64
exit
exit
wr

ping 2406:6400:000E:0031::1
ping 2406:6400:000E:0032::1
[!!!!!]
[!!!!!]
35
APNIC V2.0

1-Module 01 Basic & Interface

Uploaded by

Copyright:

Available Formats

1-Module 01 Basic & Interface

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

1-Module 01 Basic & Interface

Uploaded by

Copyright:

Available Formats

APNIC IPv6/Routing Workshop Lab

Module 1 Basic Configuration Task for Training Lab Network

DNS MAIL WWW

DNS MAIL WWW

DNS MAIL WWW

DNS MAIL WWW

Figure 1 ISP Lab Basic Configuration

Tuesday, August 27, 2013

To enter into a cisco router global configuration mode.

APNIC IPv6/Routing Workshop Lab

Enable Cisco (Proprietary) Express Forwarding to process IPv4 packet faster.

To disable HTTP server functionality on a router. Otherwise router is accessible from a

To disable HTTPS server functionality on a router. Otherwise router is accessible from a

Tuesday, August 27, 2013

APNIC IPv6/Routing Workshop Lab

Before the command:

After the command:

Tuesday, August 27, 2013

To go to an interface configuration mode of a cisco router

Assign IP address on a cisco router interface.

APNIC IPv6/Routing Workshop Lab

Example IPv6 Config on a Router:

END OF STEP TWO

Tuesday, August 27, 2013

Workshop templates for reference purpose only

DNS MAIL WWW

DNS MAIL WWW

Standard router configuration for training ISP network Region1:

APNIC IPv6/Routing Workshop Lab

Basic Conf Router2:

Basic Conf Router3:

Tuesday, August 27, 2013

transport preferred none

Standard router configuration for training ISP network Region2:

Basic Conf Router4

APNIC IPv6/Routing Workshop Lab

Tuesday, August 27, 2013

Basic Conf Router5

Basic Conf Router6

APNIC IPv6/Routing Workshop Lab

Standard router configuration for training ISP network Region3:

Basic Conf Router7:

Tuesday, August 27, 2013

DNS MAIL WWW

APNIC IPv6/Routing Workshop Lab

Basic Conf Router8:

Basic Conf Router9:

Tuesday, August 27, 2013

transport preferred none

APNIC IPv6/Routing Workshop Lab

Standard router configuration for training ISP network Region4:

DNS MAIL WWW

Basic Conf Router10:

Tuesday, August 27, 2013

Basic Conf Router11:

Basic Conf Router12:

APNIC IPv6/Routing Workshop Lab

Tuesday, August 27, 2013

Interface configuration of training ISP network Region 1:

Verify point-to-point connectivity: