Scribd
Upload
188 views

Open Loop System

The document discusses open loop control systems. Open loop systems do not use feedback to regulate output. They have a single signal flow from input to output and the output is not used to adjust future input. Examples given include automatic washing machines, electric bulbs, hand driers, and bread toasters which run open programs without considering actual output. Open loop systems are simple and cheap but inaccurate, unreliable, and unable to self-correct errors.

Uploaded by

Frances Raphael
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
188 views

Open Loop System

The document discusses open loop control systems. Open loop systems do not use feedback to regulate output. They have a single signal flow from input to output and the output is not used to adjust future input. Examples given include automatic washing machines, electric bulbs, hand driers, and bread toasters which run open programs without considering actual output. Open loop systems are simple and cheap but inaccurate, unreliable, and unable to self-correct errors.

Uploaded by

Frances Raphael
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 8

Open Loop System

A system is defined as the collection of blocks connected together to execute a


process. In electronic theory, a system can be said as a group of interconnected
electronic devices, in which each individual system having its own input output
relation, to control the other block by connecting its output further to its next
system. This is called as Control system.
The control system can also be defined as the group of devices which are used
to control or regulate the functioning of other system.
Ex: To control the production machinery we use production control systems, in
heavy industries.
Sometimes, to attain the consistency and stability of a system and to produce the
desired output of a control systems, we use feedback loop. A feedback is nothing
but a part of output signal.
This concept is most frequent and important in control systems , to achieve
stability of the output.
The feedback loop connected to the input of the system enables the system to
adjust with its parameters to get the desired output response.
Based on the feedback connection, the control systems are classified into two
types. They are Open loop control system and closed loop control system.
Back to top

Open loop feedback system


The system which doesnt have any feedback loops connected to it is called
Open loop feedback system. These type of systems doesnt depend upon its

output i.e. in open loop feedback systems, output is not used as the control
variable for the system. Open loop systems are one way signal flow systems.
As these systems doesnt contain a feedback loops ,these are also known as
Non-feedback systems. As there is no feedback loop, no data is transferred back
to the open loop systems.
The output of the open loop system can be determined only by its present state
input that means the input of open loop system will always return to zero, before
the output returns to zero. There is no chance to correct the transition errors in
open loop systems so there is more chance to occur errors.

Examples
We use open loop control systems in many applications of our day to day life.
Some of the systems designed based on the concept of open loop control
systems are given below.

Automatic washing machine

Electric bulb

Electric hand drier

Time based Bread toaster

Volume of the audio system

Water faucet

TV remote control

Clothes drier

Shades or blinds on a window.

Stepper motor or servo motor

Inkjet printers

Door lock system etc.


Back to top

Real Time Example of open loop system


Some real time examples of open loop system are explained below.

Electrical cloth drier


We operate the cloth drier depending upon the amount of clothes to make dry.
We set a timer to the system to do this operation, lets say 20 mins. As it is an
automatic open loop system, the machine stops working automatically after 20
mins, irrespective of the nature of the clothes, whether they are dry or damp.
The clothe drier is an open loop system, because it doesnt consider the
condition of clothes before it stops working. Then the task of clothes drying is an
user issue. The user can adjust the drying process of the system by setting the
timer controls as per his requirement. Observe the below block diagram for the
open loop control system, electric drier

Here the electric drier system has three blocks, timer, heating elements and
clothes. Primarily, the user sets the time for drying the clothes in the timer. And
the timer control works combined with heating elements which are used to
produce heat and dry the clothes.
As there is no feedback about clothes , humidity, the system stops working after
the pre-set time, and it doesnt consider the state of clothes. Even though the
clothes are dry, the system will switch off after the allotted time.
As the system has no feedback, this is also known as non feedback system, in
which the output of the system depends only on the input signal and no control
action of the input signal is provided.
The output of the open loop system is not compared with the input of the system
for checking errors occurred in the output. The output of non feedback signal
faithfully depends upon its input and on no other circumstances or parameters of
the external systems.
These systems may effect by large deviation in output when the pre-set value of
the system drifts. As the open loop system doesnt have any knowledge of the
output occurrence and condition, it cannot correct errors itself. This is an major
disadvantage of the open loop control system.
Another disadvantage is that these systems cannot handle the external
disturbances and have very poor ability to oppose the adoption of changes

external system parameters. For example, in this electric drier, it follows only the
pre-set time which is set by user.
In the pre-set tie of 20m mins, if we keep open the machine door for some time
and then closed, then also regardless of the situation of the clothes, the machine
turns off. Even though the clothes are dry, the machine stops after particular time
limit.
This happens because there is no feedback about the constant temperature to
maintain in the machine. This is an another disadvantage of open loop system
that it doesnt consider the external effects that may decrease the efficiency of
the system.

So we come across a discussion that the errors occurred in open loop systems
will disturb the drying process and to maintain stability these systems requires
the regular (continuous) attention of user.
This means the user needs to check the process and the temperature of clothes,
frequently and take control of the machine when it deviates from the required
conditional circumstances.

Mobile/ cellular phones

The mobile phone is an example of open loop system.At the time of incoming or
outgoing call loop begins.In this loop the mobile phone is connected to the
satellite directly.This continous till the user breaks the connection by ending the
call.
Thus this system can be said as open loop system as it cannot break the
connection by itself with out the user interference.The action is not done on an
account of feed back but manually.

Word processor
The word processor also an open loop control system. When we enter any
information though the keyboard then the other blocks of the control system, like
hardware components will process the user entered information and displays it
on LCD.
If the operator stops typing the peripheral, there will be no input provided to the
system and nothing is displayed on the display. So the word processor becomes
an example for the open loop control system.
Back to top

Advantages of Open loop control System


The main advantages of the open loop control system are listed below

The open loop systems are very simple in design and easy to design.

These are cheaper in cost than other type of control systems.

Maintenance of open loop control system is very simple.

These are stable for some extent of time.

These types of systems are convenient to use.

Back to top

Disadvantages of Open loop control System


The disadvantages of open loop system are

The bandwidth of open loop control system is less.

The non feedback system doesnt facilitates the automation of process.

Open loop systems are inaccurate in nature.

As their output is affected by some of the external system disturbances,


the non feedback systems are unreliable.

It cannot correct the output deviations automatically.


Back to top

Applications
Automatic washing machine
This we use in our home to wash and dry clothes. Internally, the machine runs
according to the reset time and doesnt depend upon the washing process,
weather it is completed or not.

Electric bulb
We all know that the electric bulb need some voltage or current to produce light.
When the mains supply is available, by switching on the switch, we can make the
bulb to work. And this process does not depends up on the temperature of bulb
or any other surrounded parameters.

Electric hand drier

The hand drier that works on electric power supply and when we keep our hands
in front of it, it will automatically dry our hands by blowing hot air, irrespective of
how much our hand is dried.

Bread toaster
The toasting machine runs as per our adjusted time period. And it toasts the
bread piece irrespective of the toasting completed or not.

Volume of the audio system


We can adjust the volume of a audio system manually, irrespective of the range
of output volume.

You might also like