Scribd Logo
Upload

Welcome to Scribd!

  • 47 views

    Spanning Tree

    Uploaded by

    fatima
    The document shows the configuration of a network switch. Several interfaces are brought up and assigned to different VLANs between 10-80 and 99. The trunk ports between switches are configured with VLAN 99 as the native VLAN. Spanning tree settings are adjusted, with VLANs 20, 40, 60, 80, and 99 configured as the root VLANs on this switch. Portfast and bpduguard are enabled on interface FastEthernet 0/11.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd

    Spanning Tree

    Uploaded by

    fatima
    47 views4 pages
    The document shows the configuration of a network switch. Several interfaces are brought up and assigned to different VLANs between 10-80 and 99. The trunk ports between switches are configured with VLAN 99 as the native VLAN. Spanning tree settings are adjusted, with VLANs 20, 40, 60, 80, and 99 configured as the root VLANs on this switch. Portfast and bpduguard are enabled on interface FastEthernet 0/11.

    Original Description:

    sp t

    Copyright

    © © All Rights Reserved

    Available Formats

    TXT, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document shows the configuration of a network switch. Several interfaces are brought up and assigned to different VLANs between 10-80 and 99. The trunk ports between switches are configured with VLAN 99 as the native VLAN. Spanning tree settings are adjusted, with VLANs 20, 40, 60, 80, and 99 configured as the root VLANs on this switch. Portfast and bpduguard are enabled on interface FastEthernet 0/11.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    47 views4 pages

    Spanning Tree

    Uploaded by

    fatima
    The document shows the configuration of a network switch. Several interfaces are brought up and assigned to different VLANs between 10-80 and 99. The trunk ports between switches are configured with VLAN 99 as the native VLAN. Spanning tree settings are adjusted, with VLANs 20, 40, 60, 80, and 99 configured as the root VLANs on this switch. Portfast and bpduguard are enabled on interface FastEthernet 0/11.

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    of 4

    Press RETURN to get started!

    %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up


    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state t
    o up
    %LINK-5-CHANGED: Interface FastEthernet0/2, changed state to up
    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state t
    o up
    %LINK-5-CHANGED: Interface FastEthernet0/3, changed state to up
    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state t
    o up
    %LINK-5-CHANGED: Interface FastEthernet0/4, changed state to up
    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state t
    o up
    S3>
    S3>en
    S3>enable
    S3#conf t
    Enter configuration commands, one per line. End with CNTL/Z.
    S3(config)#in
    S3(config)#interface f
    S3(config)#interface fastEthernet 0/11
    S3(config-if)#no sh
    S3(config-if)#no shutdown
    S3(config-if)#
    %LINK-5-CHANGED: Interface FastEthernet0/11, changed state to up
    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/11, changed state
    to up
    S3(config-if)#
    S3(config-if)#
    S3(config-if)#cl
    S3(config-if)#crx
    S3(config-if)#ex
    S3(config-if)#exit
    S3(config)#v
    S3(config)#vl
    S3(config)#vlan 10
    S3(config-vlan)#exi
    S3(config)#vlan 20
    S3(config-vlan)#exi
    S3(config)#vlan 30
    S3(config-vlan)#exi
    S3(config)#vlan 40
    S3(config-vlan)#exi
    S3(config)#vlan 50
    S3(config-vlan)#exi
    S3(config)#vlan 60

    S3(config-vlan)#exi
    S3(config)#vlan 70
    S3(config-vlan)#exi
    S3(config)#vlan 80
    S3(config-vlan)#exi
    S3(config)#vlan 99
    S3(config-vlan)#exi
    S3(config)#
    S3(config)#int
    S3(config)#interface f
    S3(config)#interface fastEthernet 0/11
    S3(config-if)#sw
    S3(config-if)#switchport m
    S3(config-if)#switchport mode a
    S3(config-if)#switchport mode access
    S3(config-if)#sw
    S3(config-if)#switchport a
    S3(config-if)#switchport access v
    S3(config-if)#switchport access vlan 10
    S3(config-if)#ex
    S3(config)#interface fastEthernet 0/18
    S3(config-if)#sw
    S3(config-if)#switchport m
    S3(config-if)#switchport mode a
    S3(config-if)#switchport mode access
    S3(config-if)#sw
    S3(config-if)#switchport a
    S3(config-if)#switchport access v
    S3(config-if)#switchport access vlan 20
    S3(config-if)#exi
    S3(config)#in
    S3(config)#interface f
    S3(config)#interface fastEthernet 0/6
    S3(config-if)#sw
    S3(config-if)#switchport m
    S3(config-if)#switchport mode a
    S3(config-if)#switchport mode access
    S3(config-if)#sw
    S3(config-if)#switchport a
    S3(config-if)#switchport access v
    S3(config-if)#switchport access vlan 30
    S3(config-if)#%SPANTREE-2-RECV_PVID_ERR: Received BPDU with inconsistent peer vl
    an id 99 on FastEthernet0/3 VLAN1.
    %SPANTREE-2-BLOCK_PVID_LOCAL: Blocking FastEthernet0/3 on VLAN0001. Inconsistent
    local vlan.
    %SPANTREE-2-RECV_PVID_ERR: Received BPDU with inconsistent peer vlan id 99 on Fa
    stEthernet0/4 VLAN1.
    %SPANTREE-2-BLOCK_PVID_LOCAL: Blocking FastEthernet0/4 on VLAN0001. Inconsistent
    local vlan.
    S3(config-if)#
    S3(config-if)#exi
    S3(config)#int
    S3(config)#interface r
    S3(config)#interface range f
    S3(config)#interface range fastEthernet 0/1-4

    S3(config-if-range)#sw
    S3(config-if-range)#switchport m
    S3(config-if-range)#switchport mode t
    S3(config-if-range)#switchport mode trunk

    S3(config-if-range)#
    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state t
    o down
    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state t
    o up
    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state t
    o down
    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state t
    o up
    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state t
    o down
    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state t
    o up
    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state t
    o down
    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state t
    o up
    sw
    S3(config-if-range)#switchport t
    S3(config-if-range)#switchport trunk n
    S3(config-if-range)#switchport trunk native v
    S3(config-if-range)#switchport trunk native vlan 99
    S3(config-if-range)#%SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking FastEthernet0/3
    on VLAN0099. Port consistency restored.
    %SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking FastEthernet0/3 on VLAN0001. Port c
    onsistency restored.
    %SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking FastEthernet0/4 on VLAN0099. Port c
    onsistency restored.
    %SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking FastEthernet0/4 on VLAN0001. Port c
    onsistency restored.
    exit
    S3(config)#
    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1
    (99), with S1 FastEthernet0/1 (1).
    %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/2
    (99), with S1 FastEthernet0/2 (1).
    S3(config)#in
    S3(config)#interface v
    S3(config)#interface vlan 99

    S3(config-if)#
    %LINK-5-CHANGED: Interface Vlan99, changed state to up
    %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan99, changed state to up
    S3(config-if)#ip ad
    S3(config-if)#ip address 172.31.99.3 255.255.255.0
    S3(config-if)#no sh
    S3(config-if)#no shutdown
    S3(config-if)#exit
    S3(config)#spa
    S3(config)#spanning-tree m
    S3(config)#spanning-tree mode ?
    pvst
    Per-Vlan spanning tree mode
    rapid-pvst Per-Vlan rapid spanning tree mode
    S3(config)#spanning-tree mode pv
    S3(config)#spanning-tree mode pvst
    S3(config)#
    S3(config)#spanning-tree vlan 20 root primary
    S3(config)#spanning-tree vlan 40 root primary
    S3(config)#spanning-tree vlan 60 root primary
    S3(config)#spanning-tree vlan 80 root primary
    S3(config)#spanning-tree vlan 99 root primary
    S3(config)#
    S3(config)#in
    S3(config)#interface f
    S3(config)#interface fastEthernet 0/11
    S3(config-if)#sp
    S3(config-if)#spa
    S3(config-if)#spanning-tree p
    S3(config-if)#spanning-tree portfast
    %Warning: portfast should only be enabled on ports connected to a single
    host. Connecting hubs, concentrators, switches, bridges, etc... to this
    interface when portfast is enabled, can cause temporary bridging loops.
    Use with CAUTION
    %Portfast has been configured on FastEthernet0/11 but will only
    have effect when the interface is in a non-trunking mode.
    S3(config-if)#spa
    S3(config-if)#spanning-tree b
    S3(config-if)#spanning-tree bpduguard e
    S3(config-if)#spanning-tree bpduguard enable
    S3(config-if)#

    You might also like