Scribd
Upload
75 views

VBClient

This document contains information about the streams and unit operations in a flowsheet simulation. It lists the components, properties, and flowrates that can be tracked for streams, as well as parameters that can be modified for unit operations. Instructions are provided for loading and running steady-state and dynamic simulations in CHEMCAD, making changes to values, running the software, and saving or closing the job.

Uploaded by

Rector Khan
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
75 views

VBClient

This document contains information about the streams and unit operations in a flowsheet simulation. It lists the components, properties, and flowrates that can be tracked for streams, as well as parameters that can be modified for unit operations. Instructions are provided for loading and running steady-state and dynamic simulations in CHEMCAD, making changes to values, running the software, and saving or closing the job.

Uploaded by

Rector Khan
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

Flowsheet Streams

No of Components
Stream IDs
Labels
Temperature
Pressure
Enthalpy
Vapor Mole Fraction
Total Mole FlowRate
Total Mass FlowRate
Total Std. Liq. Vol. FlowRate
Total Std. Vap. Vol. FlowRate
Flowrates
Benzene
BioMass
Carbon Dioxide
DeadBioMass
Alpha-D-Glucose
Water

Flowsheet UnitOps
No of Parameters
UnitOp ID
Label

1
45
1

Instructions

Dynamic Simulations:

Steady State Simulations:

End Time:
0 min
Current Time:
0.5 min

Number of UnitOps:
2

Instructions
1. Click Load CHEMCAD to load CHEMCAD into memory.
2. Click Load Simulation to browse for a simulation to load.
3. After you load a simulation, you can change values on the worksheets.
4. Click Send Changes to send your changes to CHEMCAD.
5. Click the appropriate Run command to run CHEMCAD.
6. When finished, press the Save Simulation button to save changes to the CHEMCAD job.
7. When finished, press the Close CHEMCAD button to close CHEMCAD

UnitOp IDs:
1
2

You might also like