Scribd
Upload
96 views

Windows10 + Android5 1

1. Carefully read the manual before installing the operating system (OS). Back up all data and ensure the battery is fully charged as installation can take 30-40 minutes. 2. Download the correct firmware from the manufacturer's website based on the product ID. Prepare two USB flash drives of 8GB or less, a USB keyboard, and USB hub. 3. There are steps to flash both Android and Windows. To flash Android, format and copy the firmware to a USB flash drive. Access the BIOS and boot menu to begin installation. Do not remove any devices until finished.

Uploaded by

elcarltda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
96 views

Windows10 + Android5 1

1. Carefully read the manual before installing the operating system (OS). Back up all data and ensure the battery is fully charged as installation can take 30-40 minutes. 2. Download the correct firmware from the manufacturer's website based on the product ID. Prepare two USB flash drives of 8GB or less, a USB keyboard, and USB hub. 3. There are steps to flash both Android and Windows. To flash Android, format and copy the firmware to a USB flash drive. Access the BIOS and boot menu to begin installation. Do not remove any devices until finished.

Uploaded by

elcarltda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 11

1.Please read the manual carefully before install the OS .

2.Make sure BIOS of dual OS is workable.


3.Please back up all your Date before install the OS.
4. It takes 30~40min for the processing ,so make sure full charge the battery.
Tools:
1. Download the firmware from Teclast website according to your product
ID
2. USB keyboard
3. Two USB Flash up to 8GB
4. USB HUB with adapter
Steps:
1.Flash Android ( Please note Windows OS will be deleted )
1.1Format the USB flash to FAT 32

1.2Unzip the Android firmware and copy them to the USB flash .

1.3Turn off the tablet,Then connect tablet + USB flash + keyboard through
USB HUB.
1.4 Turn on the tablet and keep clicking the ESC button on the keyboard until
you see the BIOS

1.5 Choose Boot Manager by up/down button on the keyboard

1.6 Choose Internal EFI Shell and press Enter

1.7 It is working.Do not remove anything until finished .

2. Flash Windows
2.1 Install UltraISO, Operateuiso9_cn.exe program.

2.2 Right click UltraISO then choose Run as administrator

2.3 Open the UltraISO and choose Continue

2.4 Put the USB flash to your computer . Click Files----Open---Choose


WINPE_amd64_auto.iso

2.5 Click Begin ----choose write hard disk

2.6 Choose the USB flash ,and set as the photo :

1.7 Choose Yes

1.8 Success !

2.9 Format your USB flash as NTFS and name it WINPE

2.10 Copy images and Scripts to the USB flash

1.Turn off the tablet ,connect tablet + USB flash+ keyboard through USB hub
2.Turn on the tablet and keep clicking the ESC button on the keyboard until
you see the BIOS
3.Choose Boot Manager by up/down button on the keyboard

Choose Internal EFI Shell and press Enter

It is working.Donot remove anything until finished .

Input exiton the keyboard until you see Operation Successful . Press
Enterbutton to turn off the tablet .

Done !

You might also like