Scribd Logo
Upload

Welcome to Scribd!

  • 917 views

    Task Sheet 1

    Uploaded by

    crystal galapon
    This task sheet provides instructions for welding carbon steel plates in the flat position using 6013 electrode. The summary is: 1. The task sheet outlines the supplies, equipment, steps, and assessment method for welding carbon steel plates in the flat position using 6013 electrode. 2. The supplies include 6013 electrodes, carbon steel plates, protective gear, and tools for welding. The equipment is a welding machine. 3. The 13 steps describe preparing the work area and materials, setting up the welding machine, welding within standards, and cleaning up. Performance will be evaluated based on a checklist.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Task Sheet 1

    Uploaded by

    crystal galapon
    917 views4 pages
    This task sheet provides instructions for welding carbon steel plates in the flat position using 6013 electrode. The summary is: 1. The task sheet outlines the supplies, equipment, steps, and assessment method for welding carbon steel plates in the flat position using 6013 electrode. 2. The supplies include 6013 electrodes, carbon steel plates, protective gear, and tools for welding. The equipment is a welding machine. 3. The 13 steps describe preparing the work area and materials, setting up the welding machine, welding within standards, and cleaning up. Performance will be evaluated based on a checklist.

    Original Description:

    task sheet

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This task sheet provides instructions for welding carbon steel plates in the flat position using 6013 electrode. The summary is: 1. The task sheet outlines the supplies, equipment, steps, and assessment method for welding carbon steel plates in the flat position using 6013 electrode. 2. The supplies include 6013 electrodes, carbon steel plates, protective gear, and tools for welding. The equipment is a welding machine. 3. The 13 steps describe preparing the work area and materials, setting up the welding machine, welding within standards, and cleaning up. Performance will be evaluated based on a checklist.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    917 views4 pages

    Task Sheet 1

    Uploaded by

    crystal galapon
    This task sheet provides instructions for welding carbon steel plates in the flat position using 6013 electrode. The summary is: 1. The task sheet outlines the supplies, equipment, steps, and assessment method for welding carbon steel plates in the flat position using 6013 electrode. 2. The supplies include 6013 electrodes, carbon steel plates, protective gear, and tools for welding. The equipment is a welding machine. 3. The 13 steps describe preparing the work area and materials, setting up the welding machine, welding within standards, and cleaning up. Performance will be evaluated based on a checklist.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 4
    At a glance
    Powered by AI
    The document outlines the proper procedure and safety precautions for welding carbon steel plates in flat position using 6013 electrode. It details preparing materials, setting up equipment, welding technique, inspection, and cleanup.

    The steps include wearing proper PPE, preparing the work area and materials, setting the welding machine, applying welding parameters, welding the plates, turning off the machine, cleaning slag, and returning tools and equipment.

    It's important to be physically and mentally relaxed during welding as tension can affect quality. Following welding parameters can minimize defects, and body position largely impacts quality so finding a comfortable stance is best.

    TASK SHEET 1.

    1-2
    Weld Carbon Steel Plates in Flat Position Using 6013
    Electrode
    Title:

    Performance Objective:
    Given all the materials and equipment, you must be able to:

    Use the proper P.P.E.


    Apply the essentials/parameters of welding
    Weld carbon steel plates in flat position using 6013 electrode within the
    required standard

    Supplies/Materials
    1.
    2.
    3.
    4.
    5.
    6.
    7.

    3 pcs 6013 electrode


    Carbon steel plate
    Chipping hammer
    Steel brush
    Plier
    Clamp
    Personal protective equipment (P.P.E.)

    Equipment
    1. welding machine
    Steps/Procedure:
    1. SAFETY FIRST. Wear the proper personal protective equipment
    before entering the practical work area.
    2. Check the practical work area if it is safe for working.
    3. Check all the tools and equipment if its functional.
    4. Prepare the tools, equipment and materials needed for the activity.
    5. Prepare the carbon steel plate through cleaning by steel brush.
    6. Set up the welding machine and set the correct amperage.
    7. Apply the parameters/essentials of welding.
    8. Weld carbon steel plate in flat position using electrode 6013 within
    the required standard.
    9. Turn off the machine before checking the finished work.
    10. Clean the slags on the weldment.
    11. Use pliers in holding the workpiece.
    12. Present your work to your trainer.

    13. Put back the tools and equipment in proper places after using.
    Tips, Notes, and Variations
    See to it that you are physically and mentally relax during
    welding because it can affect the quality and appearance of the
    weldment.
    Considering the essentials of welding can minimize weld defects.
    Body position can largely affects the quality of weldment. It is
    always better to position yourself comfortably.
    Assessment Method:
    Demonstration
    Performance will be evaluated through Performance Criteria Checklist.

    Prepared by: Crystal Joy Aepole C. Galapon


    SMAW NC II Trainer

    Performance Criteria Checklist 1.1-2


    Name of Trainee:
    CRITERIA

    Did you.
    1.
    Wear the proper personal protective
    equipment before entering the practical work
    area?
    2.
    Check the practical work area if it is safe for
    working?
    3.
    Check all the tools and equipment if its
    functional?
    4.
    Prepare the tools, equipment and materials

    YES

    NO

    needed for the activity?


    5.
    Prepare the carbon steel plate through
    cleaning by steel brush?
    6.
    Set up the welding machine and set the
    correct amperage?
    7.
    Apply the parameters/essentials of
    welding?
    8. Weld carbon steel plate in flat position using
    electrode 6013 within the required standard?
    9.
    Turn off the machine before checking the
    finished work?
    10.

    Clean the slags on the weldment?

    11.

    Use pliers in holding the workpiece?

    12.

    Present your work to your trainer?

    13.
    Put back the tools and equipment in proper
    places after using.
    CRITERIA

    Percentage

    Quality (appearance and durability)

    40%

    Proper use of P.P.E.

    30%

    Speed and Accuracy

    20%

    Job Morale

    10%

    SCORE

    TOTAL
    Assessed by:

    Crystal Joy Aepole C. Galapon


    SMAW NC II Trainer

    100%

    You might also like