Scribd
Upload
17K views4 pages

Design of Footing For Corner Column

This document provides the design of a footing for a corner column. It includes: 1. Sizing the square footing at 1.5m x 1.5m to support a total load of 242kN from the column and soil, meeting the required bearing capacity of the soil. 2. Checking the net upward soil pressure of 97.8kN/m^2 is less than the allowable soil bearing capacity of 120kN/m^2. 3. Designing the footing slab 250mm thick with 12 reinforcing bars to resist the bending moment of 57.45kN-m. 4. Designing the beam above the footing to be 750mm deep with 6

Uploaded by

ilachezhiyan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
17K views4 pages

Design of Footing For Corner Column

This document provides the design of a footing for a corner column. It includes: 1. Sizing the square footing at 1.5m x 1.5m to support a total load of 242kN from the column and soil, meeting the required bearing capacity of the soil. 2. Checking the net upward soil pressure of 97.8kN/m^2 is less than the allowable soil bearing capacity of 120kN/m^2. 3. Designing the footing slab 250mm thick with 12 reinforcing bars to resist the bending moment of 57.45kN-m. 4. Designing the beam above the footing to be 750mm deep with 6

Uploaded by

ilachezhiyan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

DESIGN

OF FOOTING FOR CORNER COLUMN

Data :Load from side or edge column = 220 KN


Column size
= 230 x 230 mm
SBC of soil
=120 KN /m2
Concrete Mix
=M20
Steel Grade
= Fe 415
Clear cover of bottom slab
=50 mm
Design :-

1. SIZE OF FOOTING :
Load on column

=220 KN

Self weight of footing 10%

22 KN

SBC of soil

------242 KN
--------=120 KN/m2

Area of footing required

Total load on soil

P1

242 / 120 =2.02 m2

Provide 1.50 x 1.50 m square footing.


Area provided

=2.25 m2 > 1.83 m2

2. NET UPWARD SOIL PRESSURE :


Load from column

=220 KN

Area of footing

=2.25 m2

Net upward soil pressure

=220 / 2.25 =97.80 KN/m2


< 120 KN/m2(SBC)

O.K.

3. FOOTING SLAB :
Provide overall depth of slab
Bending moment

=250 mm
97.8 x 0.8852/2
=38.30 KN.m

Factored moment

Mu

=1.5 x 38.30 =57.45 KN.m

K=Mu /b d2

= 57.45 x 106 / 1000 x 2852 = 0.71

100 Pt from Table 2 of Design Aid


Ast =

0.206/100x1000x 285 = 587 mm2

Provide 12 RTS @ 150 mm C / c

=0.206
(Ast=754 mm2

587 mm2 ).

Distributors:

Minimum Ast =0.20/100x1000x 300 =600 mm2


Provide 12 RTS @ 150 mm C / c

(Ast=754 mm2

600 mm2 )

4. BEAM DESIGN :
Load /m run on beam
Load from footing slab
(1/2x2.12x0.885)x97.8
2.12

}
x2

=86.55 KN/m

Self weight of beam assuming size as 300 x 600 mm


0.35 x (0.60 0.35) x 25
Total udl
Span

= 2.63 KN/m
--------= 89.18 KN/m
----------

=2.12 m

Maximum bending moment

=wl2/2
= 89.18x 2.122 /2
= 200.41 KN.m

Factored B.M.

Mu

=1.50 x 200.41
=300.62 KN.m

K = 300.62 x 106

= 3.18

350 x 5202
Increase depth of beam to 750 mm.
K = 300.62 x 106

= 1.91

350 x 6702
100 Pt from Table 2 of Design Aid = 0.605
Ast

= 0.605
100

x 350 x670

= 1419 mm2
Provide 6 Nos. 20 RTS 2 bottom. Provide 3 Nos. 16
RTS @ top. (Ast = 1884 mm2 > 1419 mm2 ).

Check for shear:


Maximum Shear Force = 89.20 x 2.12 = 189.10 KN.
Factored SF Vu = 1.5 x 189.10 = 283.66 KN.
Shear stress = 283.66 x 103
350 x 670
=0.12 N/ mm2 < 2.80 N/mm2
Provide 8 RTS

O.K.

4 legged stirrups @ 200 mm c/c.

You might also like