Scribd
Upload
37 views1 page

Section A ? Section A ?: Material Specification

Uploaded by

Hizbar Arsjad

The document contains details for assembling and installing an aluminum railing system. It specifies the dimensions and materials for extruded channels, cover plates, pipes, balusters, and anchors. It shows how the different sections will connect together using welds, bolts, pins, and sealant. The railing is designed to mount to a concrete traffic barrier using anchor bolts embedded in the barrier.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt

Section A ? Section A ?: Material Specification

Uploaded by

Hizbar Arsjad
37 views1 page
The document contains details for assembling and installing an aluminum railing system. It specifies the dimensions and materials for extruded channels, cover plates, pipes, balusters, and anchors. It shows how the different sections will connect together using welds, bolts, pins, and sealant. The railing is designed to mount to a concrete traffic barrier using anchor bolts embedded in the barrier.

Original Description:

steel

Original Title

10.5_A1_2

Copyright

© © All Rights Reserved

Available Formats

PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

The document contains details for assembling and installing an aluminum railing system. It specifies the dimensions and materials for extruded channels, cover plates, pipes, balusters, and anchors. It shows how the different sections will connect together using welds, bolts, pins, and sealant. The railing is designed to mount to a concrete traffic barrier using anchor bolts embedded in the barrier.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
37 views1 page

Section A ? Section A ?: Material Specification

Uploaded by

Hizbar Arsjad
The document contains details for assembling and installing an aluminum railing system. It specifies the dimensions and materials for extruded channels, cover plates, pipes, balusters, and anchors. It shows how the different sections will connect together using welds, bolts, pins, and sealant. The railing is designed to mount to a concrete traffic barrier using anchor bolts embedded in the barrier.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 1

ANCHOR BOLTS OR

RESIN BONDED ANCHORS


"

BALUSTER
RAILING & BALUSTER

2"

THIS COVER PLATE SECTION SHALL


BE SNAPPED INTO POSITION AFTER
2" STD. PIPE HAS BEEN WELDED
TO BOTTOM EXTRUDED CHANNEL.

RAILING & BALUSTER

2" STD. PIPE RAILING

2" STD. PIPE RAILING

1"

2" STD. RAILING SPLICE


EXTRUSION. DRILL "
HOLE FOR " DRIVE PIN
AT LOCATION SHOWN.
" MIN.
" MAX.

30

"

DRIVE PINS

"

6"

DR "
IV
E
PI

30

2" STD. PIPE RAILING


SPLICE. DRILL "
HOLE FOR " DRIVE PIN
AT LOCATION SHOWN.

" MIN.
" MAX.

"

DRIVE PINS

TYP.

ALUM. BAR x 1 x 0'-1


(2 REQ'D. PER PIPE
RAILING SPLICE)
1" STD. PIPE BALUSTER

1"

1" STD. PIPE BALUSTER

2" STD.
PIPE
1
"

SECTION

SEE DETAIL

OPTION #1

C
2"

2" STD.
PIPE RAILING

1"
55

A
?

SECTION
OPTION #2

LOCATE ON OPPOSITE SIDE OF TRAFFIC.


DRIVE PINS SHALL BE DRIVEN FLUSH
WITH THE OUTSIDE FACE OF THE RAILING.

A
?

LOCATE ON OPPOSITE SIDE OF TRAFFIC.


DRIVE PINS SHALL BE DRIVEN FLUSH
WITH THE OUTSIDE FACE OF THE RAILING.

"
BASE & BALUSTER
" ALUM. WELDED
TO END OF CHANNEL
(WELD BEFORE ANODIZING)

3"

EXTRUDED
CHANNEL

"
MAX.

"
ALUMINUM MAT'L

TOP OF CONC.
TRAFFIC BARRIER

PIPES
EXTRUDED CHANNELS,
COVER PLATES & BAR
ANCHOR BOLTS,
NUTS & WASHERS

STEEL

MATERIAL
SPECIFICATION

STRIP
DRIVE PINS

ASTM B 221- 6005-T5 OR 6005A-T5


ASTM B 241 OR B 429 6061-T6
ASTM B 221- 6005-T5
STANDARD SPECIFICATION SECTION 9-06.5(4)
(GALVANIZE IN ACCORDANCE WITH AASHTO
SPECIFICATION M 232)
ASTM A 36
ASTM A 276 TYPE 302 STAINLESS STEEL

10.5-A1-2

M:\STANDARDS\BP Rails\Ped_Rail2.MAN

Mon May 07 08:34:48 2012

TRIM TIPS
AT WASHERS

"
(TYP.)

"

DETAIL
DRAIN HOLES
NOT SHOWN

POLYURETHANE OR SILICONE
SEALANT (COLOR TO MATCH
ALUMINUM RAILING)

TOP OF TRAFFIC BARRIER

"

EXCEPT AT "
DRAIN HOLE

BOTTOM EXTRUDED
CHANNEL

R = " (TYP.)

"

DRILL 1" HOLE THROUGH


COVER PLATE & EXTRUDED
CHANNEL AT EA. BALUSTER.
COVER PLATE

"
(TYP.)

COVER PLATE

" ALUM. FULL WIDTH


OF EXTRUDED CHANNEL

PART

"

RESIN BONDED ANCHORS

FILL WITH 1" O.D. WASHERS AS


NECESSARY TO ADJUST TOP OF
RAIL TO A SMOOTH PROFILE.

" RADIUS AT
TOP & SIDES

"

"

END DETAIL

"

"
MAX.

08/26/2010

" DRAIN HOLE.


LOCATE AT BOTTOM
EXTRUDED CHANNEL

"

"

COVER PLATE SHALL BE SNAPPED


INTO POSITION AFTER BOTTOM
EXTRUDED CHANNEL HAS BEEN
BOLTED INTO PLACE.

6" EMBEDMENT
FOR ANCHOR BOLTS
(FOR RESIN BONDED
ANCHORS USE MFG'S
RECOMMENDATION.)

"
(TYP.)

" RESIN BONDED ANCHOR (5" MIN.


EMBEDMENT) WITH STD. NUT & " STD.
WASHER OR " x 7" ANCHOR BOLTS.

POLYURETHANE OR SILICONE SEALANT.


COLOR TO MATCH ALUMINUM RAILING

" x 7" ANCHOR BOLTS WITH STD.


NUT & 1" O.D. WASHER, THREADED 10
N.C. 1" LONG. (ALTERNATE TO "
RESIN BONDED ANCHORS)

TACK WELD 3
SIDES EACH HEAD
STEEL STRIP 2 x x 0'-3

" HOLE AT INTERIOR SECTIONS OR " x "


SLOTTED HOLE (FOR LONGITUDINAL
ADJUSTMENT) AT END SECTIONS AND AT
SECTIONS IMMEDIATELY ADJACENT TO
EXPANSION JOINTS.

SECTION

B
?

ANCHOR BOLTS SHALL BE


POSITIONED IN A JIG DURING WELDING.

You might also like