CA721F7V2: EGSM Dual Duplex Indoor Filter

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

CA721F7V2

EGSM Dual Duplex Indoor Filter

For use in EGSM BTS with DAMPS co-location


Provides DAMPS rejection for EGSM band
Low downlink insertion loss

TECHNICAL CHARACTERISTICS
Downlink (TX)
Passband
Insertion Loss
Insertion Loss Variation
Uplink (RX)
Passband
Insertion Loss
Insertion Loss Variation
Impedance
Group Delay Variation
Absolute Delay
Input Return Loss
Output Return Loss
Stop Band Attenuation
< 880 MHz
Intermodulation
Out of Band
Inband
Total Power
Connections
Operating Temperature

CA721V2d7a

927.3 to 934.9 MHz


0.7 dB max at band edge
0.55 dB max at mid-band
0.2 dB max across passband
882.3 to 889.9 MHz
1.2 dB max at band edge
0.9 dB max at mid-band
1.05 dB max across passband
50 ohms
200 ns max across passband
1 us max
18 dB min
18 dB min
37dB min
<-125 dBm for two tones at any frequency in the D-AMPS Band at +
26 dBm each
<-125 dBm with two tones at any frequency in the uplink passband at
-30 dBm per tone
<-125 dBm in the uplink band with two tones of 43 dBm (down link)
1 carrier at +46.5 dBm, or 2 carriers at +43 dBm each
DIN 7/16 (F) x 2
0 to +50C

PRELIMINARY

3 March 2006

Triasx Pty Ltd Unit 2, 205 Queensport Road, Murarrie, QLD 4172, Australia
Tele: +61 (0)7 3907 1200
Fax: +61 (0)7 3907 1222
www.triasx.com
ABN: 18 115 398 564

CA721F7V2
EGSM Dual Duplex Indoor Filter
RESPONSE CHARACTERISTICS

MECHANICAL

CA721V2d7a

PRELIMINARY

3 March 2006

Triasx Pty Ltd Unit 2, 205 Queensport Road, Murarrie, QLD 4172, Australia
Tele: +61 (0)7 3907 1200
Fax: +61 (0)7 3907 1222
www.triasx.com
ABN: 18 115 398 564

You might also like