Scribd
Upload
371 views1 page

DIN EN ISO 9013 - Angular Deviation PDF

This document shows the achievable cut qualities of perpendicularity tolerance for workpieces up to 40mm thick according to DIN EN ISO 9013. It provides a chart displaying the relationship between material thickness, angular deviation, and perpendicularity tolerance for laser, oxyfuel, and plasma cutting processes. The perpendicularity tolerance ranges from 0.5mm for thin materials cut with laser or oxyfuel to over 1.5mm for thicker materials cut with plasma or oxyfuel.

Uploaded by

florinelvv
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
371 views1 page

DIN EN ISO 9013 - Angular Deviation PDF

This document shows the achievable cut qualities of perpendicularity tolerance for workpieces up to 40mm thick according to DIN EN ISO 9013. It provides a chart displaying the relationship between material thickness, angular deviation, and perpendicularity tolerance for laser, oxyfuel, and plasma cutting processes. The perpendicularity tolerance ranges from 0.5mm for thin materials cut with laser or oxyfuel to over 1.5mm for thicker materials cut with plasma or oxyfuel.

Uploaded by

florinelvv
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Achievable cut qualities of perpendicularity tolerance u

Workpieces up to 40 mm as per DIN EN ISO 9013


3

lasm
p
l
a
n
entio
v
n
o
c

1,5

a
2
4

oxyfuel

1
3

0,5

laser
2
1

0
5

10

15

Angular deviation in degree

legend:
a

Perpendicularity tolerance u in mm
(only for demonstration, for detailed information
please take a look at DIN EN ISO 9013)

20

25

Material thickness a in mm

30

35

40

Areas of tolerance

Perpendicularity tolerance u in mm

You might also like