HPE 5820 TAA-compliant Switch Series: Key Features

Download as pdf or txt
Download as pdf or txt
You are on page 1of 12

Data sheet

HPE 5820 TAA-compliant


Switch Series

Key features
For enterprise core, distribution/data center
Up to 24 ports of 10GbE per unit/194 per
stack
Flex chassismodular resiliency
Cut-through switching for very low latency

deployment, reduce power consumption, as


well as rack space. Extremely versatile, the
switches can be used in high-performance,
high-density building, or department cores
as part of a consolidated network; for data
center top-of-rack server access; or as
high-performance Layer 3, 10GbE
aggregation switches in campus and data
center networks.

Hot-swappable I/O, power supplies, and fans

Product overview
HPE 5820 Switch Series supports advanced
features that deliver a unique combination
of unmatched benefits such as 10 Gigabit
Ethernet, Fibre Channel over Ethernet (FCoE)
connectivity, high-availability architecture, full
Layer 2/3 dual-stack IPv4/IPv6, and line-rate
as well as low-latency performance on all
ports. Extensible embedded application
capabilities enable these switches to integrate
services into the network, consolidating
devices, and appliances to simplify

Features and benefits


Quality of Service (QoS)
Powerful QoS feature
Creates traffic classes based on access
control lists (ACLs), IEEE 802.1p
precedence, IP, and DSCP or Type of Service
(ToS) precedence; supports filter, redirect,
mirror, or remark; supports the following
congestion actions: strict priority (SP)
queuing, weighted round robin (WRR),
weighted fair queuing (WFQ), weighted
random early discard (WRED), weighted
deficit round robin (WDRR), and SP+WDRR

Data sheet

Page 2

Integrated network services


Extends and integrates application
capability into the network, with support
for open application architecture (OAA)
modules
Ring Resiliency Protection Protocol (RRPP)
Provides fast recovery for ring Ethernetbased topology; helps facilitate consistent
application performance for applications
such as VoIP
Management
Remote configuration and management
Enables configuration and management
through a secure Web browser or a CLI
located on a remote device
IEEE 802.1ab LLDP discovery
Advertises and receives management
information from adjacent devices on a
network, facilitating easy mapping by
network management applications
USB support
File copy
Allows users to copy switch files to and
from a USB flash drive
DHCP options
Provides server (RFC 2131), client, snooping,
and relay options

SNMPv1, v2c, and v3


Facilitates centralized discovery, monitoring,
and secure management of networking
devices
sFlow
Provides scalable ASIC-based network
monitoring and accounting; this allows
network operators to gather a variety
of sophisticated network statistics and
information for capacity planning and
real-time network monitoring purposes
Network Time Protocol (NTP)
Synchronizes timekeeping among
distributed time servers and clients; keeps
timekeeping consistent among all
clock-dependent devices within the network
so that the devices can provide diverse
applications based on the consistent time
Connectivity
High-density port connectivity
194 10GbE ports with a 40 Gbps resilient
backplane
Data center I/O consolidation
HPE 5820-14XG FCoE module supports
two 4x8/4x2 Gbps FCoE modules (up to
eight Fibre Channel ports total) to reduce
cost and complexity while boosting network
performance

Data sheet

Page 3

Auto-MDIX
Provides automatic adjustments for
straight-through or crossover cables on all
10/100 and 10/100/1000 ports
Jumbo frames
On Gigabit Ethernet and 10 Gigabit Ethernet
ports, jumbo frames allow high-performance
remote backup and disaster-recovery
services
IPv6 native support
IPv6 host
Enables switches to be managed and
deployed at the IPv6 networks edge
Dual stack (IPv4/IPv6)
Transitions from IPv4 to IPv6, supporting
connectivity for both protocols
MLD snooping
Forwards IPv6 multicast traffic to the
appropriate interface
IPv6 ACL/QoS
Supports ACL and QoS for IPv6 network
traffic, preventing traffic flooding
IPv6 routing
Supports IPv6 static routes and IPv6
versions of RIP, OSPF, IS-IS, and Border
Gateway Protocol (BGP) routing protocols

Performance
Hardware-based wire-speed access control
lists (ACLs)
Helps provide high levels of security and
ease of administration without impacting
network performance with a feature-rich
TCAM-based ACL implementation
Unique versatile architecture
Supports the best of both fixed-port and
modular configurations
Cut-through switching
Delivers wire-speed, line-rate performance
on all ports, as well as cut-through switching
for low latency
Manageability
Full-featured console
Provides complete control of the switch with
a familiar CLI
Web interface
Allows configuration of the switch from any
Web browser on the network
RMON and sFlow
Provide advanced monitoring and reporting
capabilities for statistics, history, alarms, and
events

Data sheet

Page 4

Multiple configuration files


Allow multiple configuration files to be
stored to a flash image
Troubleshooting
Ingress and egress port monitoring enable
network problem solving
Traceroute and ping enable testing of
network connectivity
Virtual cable tests provide visibility to
cable problems
Layer 2 switching
32K MAC addresses
Provides access to many Layer 2 devices
4,094 port-based VLANs
Provides security between workgroups
IEEE 802.1ad QinQ and selective QinQ
Increases the scalability of an Ethernet
network by providing a hierarchical
structure; connects multiple LANs on a
high-speed campus or metro network
Gigabit Ethernet port aggregation
Allows grouping of ports to increase overall
data throughput to a remote device
10GbE port aggregation
Allows grouping of ports to increase overall
data throughput to a remote device

Spanning Tree/MSTP, RSTP, and STP root


guard
Prevents network loops
sFlow
Allows traffic sampling
GARP VLAN Registration Protocol
Allows automatic learning and dynamic
assignment of VLANs
Layer 3 services
Address Resolution Protocol (ARP)
Determines the MAC address of another
IP host in the same subnet; supports static
ARPs; gratuitous ARP allows detection of
duplicate IP addresses; proxy ARP allows
normal ARP operation between subnets or
when subnets are separated by a Layer 2
network
Dynamic Host Configuration Protocol
(DHCP)
Simplifies the management of large IP
networks and supports client and server;
DHCP Relay enables DHCP operation across
subnets

Data sheet

Page 5

Layer 3 routing
Layer 3 IPv4 routing
Provides routing of IPv4 at media speed;
supports static routes, RIP and RIPv2, OSPF,
IS-IS, and BGP
Routing Information Protocol (RIP) and
RIPng support provides complete support of
RIP for both IPv4 and IPv6
OSPF and OSPFv3 support
Provides complete support of OSPF for both
IPv4 and IPv6
IS-IS and IS-IPv6 support
Provides complete support of IS-IS for both
IPv4 and IPv6
Layer 3 IPv6 routing
Provides routing of IPv6 at media speed;
supports static routes, RIPng, OSPFv3,
IS-IPv6, and BGP4+
Bidirectional Forwarding Detection (BFD)
Enables link connectivity monitoring and
reduces network convergence time for RIP,
OSPF, BGP, IS-IS, VRRP, MPLS, and IRF
Virtual Router Redundancy Protocol (VRRP)
and VRRP Extended
Allows quick failover of router ports

Policy-based routing
Makes routing decisions based on policies
set by the network administrator
IGMPv1, v2, and v3
Allows individual hosts to be registered on a
particular VLAN
PIM-SSM, PIM-DM, and PIM-SM (for IPv4
and IPv6)
Supports IP Multicast address management
and inhibition of DoS attacks
Equal-Cost Multipath (ECMP)
Enables multiple equal-cost links in a routing
environment to increase link redundancy
and scale bandwidth
Security
Defense in-depth security
Provides integrated and distributed security
enforcement that can be managed from a
central location, such as the HPE Intelligent
Management Center (IMC)
Advanced processor queuing mechanism
Helps prevent denial-of-service (DoS)
attacks, while DHCP snooping helps enable
that devices can only receive an IP address
from a legitimate DHCP server on the
network

Data sheet

Page 6

RADIUS/HWTACACS
Eases switch management security
administration by using a password
authentication server
Secure shell (SSHv2)
Encrypts all transmitted data for secure,
remote CLI access over IP networks
IEEE 802.1X-based dynamic delivery of
QoS, ACLs, and VLANs
Allows complete control over user network
access
Guest VLAN
Provides a browser-based environment to
authenticated clients that is similar to IEEE
802.1X
Port isolation
Secures and adds privacy, and prevents
malicious attackers from obtaining user
information
Port security
Allows access only to specified MAC
addresses, which can be learned or specified
by the administrator
MAC-based authentication
Allows or denies access to the switch based
on a client MAC address

IP source guard
Helps prevent IP spoofing attacks
HTTPS management
Provides secure Web management
Unicast Reverse Path Forwarding (URPF)
Limits malicious traffic on a network
Multi-Customer Edge (MCE)-Multicast
Virtual Routing and Forwarding (MVRF)
Provides MPLS Edge router support
Public Key Infrastructure (PKI)
Is used to control access
Convergence
Voice VLAN
Automatically assigns VLAN and priority for
IP phones, simplifying network configuration
and maintenance
LLDP-MED
Is a standard extension that automatically
configures network devices, including
LLDP-capable IP phones

Data sheet

Page 7

Internet Group Management Protocol


(IGMP)
Utilizes Any-Source Multicast (ASM) or
Source-Specific Multicast (SSM) to manage
IPv4 multicast networks; supports IGMPv1,
v2, and v3
Protocol Independent Multicast (PIM)
Defines modes of Internet multicasting
to allow one-to-many and many-to-many
transmission of information; supports PIM
Dense Mode (DM), Sparse Mode (SM), and
Source-Specific Multicast (SSM)
Monitor and diagnostics
Port mirroring
Enables traffic on a port to be
simultaneously sent to a network analyzer
for monitoring
OAM (IEEE 802.3ah)
Operations, administration, and maintenance
(OAM) management capability detects
data link layer problems that occur in the
last mile; monitors the status of the link
between the two devices
CFD (IEEE 802.1ag)
Connectivity fault detection (CFD) provides
a Layer 2 link OAM mechanism used for link
connectivity detection and fault locating

Additional information
HPE Intelligent Resilient Framework (IRF)
Creates virtual resilient switching fabrics,
where two or more switches perform as a
single Layer 2 switch and Layer 3 router
Does not require switches to be co-located
and allows them to be part of a disasterrecovery system
Allows servers or switches to be attached
using standard LACP for automatic load
balancing and high availability
Simplifies network operation by helping
eliminate the complexity of Spanning Tree
Protocol, ECMP, or VRRP
OAA modules
Supports wireless network management
and high-performance security applications;
leverages network infrastructure investment
Green IT and power
Improves energy efficiency through
the use of the latest advances in silicon
development; shuts off unused ports and
utilizes variable-speed fans, reducing energy
costs

Data sheet

Page 8

High scalability with IRF

Electronic and telephone support

HPE Intelligent Resilient Framework (IRF)


technology simplifies the architecture of
server access networks; up to nine
HPE 5820/5820AF stackable switches
can be combined to deliver unmatched
scalability of virtualized access layer
switches and flatter, two-tier HPE FlexFabric
networks using IRF, which reduces cost and
complexity
Warranty and support
1-year warranty
Advance hardware replacement with
10-calendar day delivery (available in most
countries)

Limited electronic and business-hours


telephone support is available from
HPE for the entire warranty period; to reach
our support centers, refer to hp.com/
networking/contact-support; for details
on the duration of support provided with
your product purchase, refer to hp.com/
networking/warrantysummary
Software releases
To find software for your product, refer to
hp.com/networking/support; for details
on the software releases available with
your product purchase, refer to hp.com/
networking/warrantysummary

HPE 5820 TAA-compliant Switch Series


Specifications

HPE 5820-14XG-SFP+ TAA-compliant Switch with 2 Interface


Slots and 1 OAA Slot (JG259B)

HPE 5820-24XG-SFP+ TAA-compliant Switch (JG243B)

I/O ports and slots

14 SFP+ 10GbE ports; Duplex: full only


2 extended module slots
1 open module slot
4 RJ-45 auto-negotiating 10/100/1000 ports
(IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T)
1 RJ-45 serial console port
Supports a maximum of 14 SFP+ ports plus 8 8/4/2 Gbps Fibre
Channel SFP+ ports, with optional module

24 SFP+ 10GbE ports; Duplex: full only


4 RJ-45 auto-negotiating 10/100/1000 ports
(IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T)
1 RJ-45 serial console port
Supports a maximum of 24 SFP+ ports
plus 4 autosensing 10/100/1000 ports

Power supplies

2 power supply slots


1 minimum power supply required (ordered separately)

2 power supply slots


1 minimum power supply required (ordered separately)

Fan tray

includes: 1 x JC096A
1 fan tray slot
Base product includes fan tray.

includes: 1 x JC096A
1 fan tray slot
Base product includes fan tray.

17.32(w) x 18.39(d) x 3.39(h) in (43.99 x 46.71 x 8.61 cm)


(2Uheight)
33.29 lb (15.1 kg)

17.32(w) x 16.81(d) x 1.73(h) in (44.0 x 42.7 x 4.4 cm) (1U height)


18.74 lb (8.5 kg)

2048 MB SDRAM, 512 MB flash; packet buffer size: 2 MB

2048 MB SDRAM, 512 MB flash; packet buffer size: 2 MB

Physical characteristics
Dimensions
Weight

Memory and processor

Data sheet

Page 9

HPE 5820-14XG-SFP+ TAA-compliant Switch with 2 Interface


Slots and 1 OAA Slot (JG259B)

HPE 5820-24XG-SFP+ TAA-compliant Switch (JG243B)

Throughput
Routing/Switching capacity
Routing table size
MAC address table size

2.02 s (Cut Through), 2.02 s (Store and Forward)


(64-byte packets)
up to 363 million pps (64-byte packets)
488 Gbps
12000 entries (IPv4)
32000 entries

2.02 s (Cut Through), 2.02 s (Store and Forward)


(64-byte packets)
up to 363 million pps (64-byte packets)
488 Gbps
12000 entries (IPv4)
32000 entries

Environment
Operating temperature
Operating relative humidity
Acoustic

32F to 113F (0C to 45C)


10% to 90%, noncondensing
Low-speed fan: 44.3 dB, High-speed fan: 54.1 dB

32F to 113F (0C to 45C)


10% to 90%, noncondensing
Low-speed fan: 48.4 dB, High-speed fan: 59.7 dB

Electrical characteristics
Frequency
Maximum heat dissipation
AC voltage

50/60 Hz
836 BTU/hr (881.98 kJ/hr)
100120/200240 VAC

50/60 Hz
631 BTU/hr (665.71 kJ/hr)
100120/200240 VAC

Safety

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1;


EN60825-2 Safety of Laser Products-Part 2; IEC 60950-1;
CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST;
EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1;


EN60825-2 Safety of Laser Products-Part 2; IEC 60950-1;
CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST;
EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM;
ROHS Compliance

Emissions

VCCI Class A; EN 55022 Class A; ICES-003 Class A;


ANSI C63.4 2003; AS/NZS CISPR 22 Class A;
EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005;
EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A

VCCI Class A; EN 55022 Class A; ICES-003 Class A;


ANSI C63.4 2003; AS/NZS CISPR 22 Class A;
EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005;
EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A

ETSI EN 300 386 V1.3.3


EN 55024:1998+ A1:2001 + A2:2003
EN 61000-4-2; IEC 61000-4-2
EN 61000-4-3; IEC 61000-4-3
EN 61000-4-4; IEC 61000-4-4
EN 61000-4-5; IEC 61000-4-5
EN 61000-4-6; IEC 61000-4-6
IEC 61000-4-8; EN 61000-4-8
EN 61000-4-11; IEC 61000-4-11
EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3

ETSI EN 300 386 V1.3.3


EN 55024:1998+ A1:2001 + A2:2003
EN 61000-4-2; IEC 61000-4-2
EN 61000-4-3; IEC 61000-4-3
EN 61000-4-4; IEC 61000-4-4
EN 61000-4-5; IEC 61000-4-5
EN 61000-4-6; IEC 61000-4-6
IEC 61000-4-8; EN 61000-4-8
EN 61000-4-11; IEC 61000-4-11
EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3

Management

IMCIntelligent Management Center; command-line interface;


Web browser; SNMP Manager; Telnet; HTTPS; RMON1; FTP

IMCIntelligent Management Center; command-line interface;


Webbrowser; SNMP Manager; Telnet; HTTPS; RMON1; FTP

Notes

Customer must order a power supply, as the device does not come
with a PSU. At least one JC087A or JC090A is required.

Customer must order a power supply, as the device does not


come with a PSU. At least one JC087A or JC090A is required.

Performance
Latency

Immunity
Generic
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency magnetic field
Voltage dips and interruptions
Harmonics
Flicker

Data sheet

Services

Page 10

HPE 5820-14XG-SFP+ TAA-compliant Switch with 2 Interface


Slots and 1 OAA Slot (JG259B)

HPE 5820-24XG-SFP+ TAA-compliant Switch (JG243B)

3-year, parts only, global next-day advance exchange (UY832E)


3-year, 4-hour onsite, 13x5 coverage for hardware (UV894E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV897E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW
phone support and SW updates (UV900E)
3-year, 24x7 SW phone support, software updates (UV903E)
Installation with minimum configuration, system-based pricing
(UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV895E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV898E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software
phone (UV901E)
4-year, 24x7 SW phone support, software updates (UV904E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV896E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV899E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software
phone (UV902E)
5-year, 24x7 SW phone support, software updates (UV905E)
3 Yr 6 hr Call-to-Repair Onsite (UW972E)
4 Yr 6 hr Call-to-Repair Onsite (UW973E)
5 Yr 6 hr Call-to-Repair Onsite (UW974E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR559E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR560E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR563E)
1-year, 24x7 software phone support, software updates (HR562E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software
phone support and software updates (HR561E)
1-year, 24x7 software phone support, software updates + Next
Business Day Hardware Exchange (U4D06E)
1-year, 24x7 software phone support, software updates + 4 hour
hardware exchange (U0S83E)
3-year, 24x7 software phone support, software updates + Next
Business Day Hardware Exchange (U4D57E)
3-year, 24x7 software phone support, software updates + 4 hour
Hardware Exchange (U0T34E)
4-year, 24x7 software phone support, software updates + Next
Business Day Hardware Exchange (U4E08E)
4-year, 24x7 software phone support, software updates + 4 hour
Hardware Exchange (U0T85E)
5-year, 24x7 software phone support, software updates + Next
Business Day Hardware Exchange (U0S32E)
5-year, 24x7 software phone support, software updates + 4 hour
Hardware Exchange (U0U36E)
Refer to the HPE website at hp.com/networking/services for
details on the service-level descriptions and product numbers.
For details about services and response times in your area, please
contact your local HPE sales office.

3-year, parts only, global next-day advance exchange (UY832E)


3-year, 4-hour onsite, 13x5 coverage for hardware (UV894E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV897E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW
phone support and SW updates (UV900E)
3-year, 24x7 SW phone support, software updates (UV903E)
Installation with minimum configuration, system-based pricing
(UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV895E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV898E)
4-year, 4-hour onsite, 24x7 coverage for hardware,
24x7 software phone (UV901E)
4-year, 24x7 SW phone support, software updates (UV904E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV896E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV899E)
5-year, 4-hour onsite, 24x7 coverage for hardware,
24x7 software phone (UV902E)
5-year, 24x7 SW phone support, software updates (UV905E)
3 Yr 6 hr Call-to-Repair Onsite (UW972E)
4 Yr 6 hr Call-to-Repair Onsite (UW973E)
5 Yr 6 hr Call-to-Repair Onsite (UW974E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR559E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR560E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR563E)
1-year, 24x7 software phone support, software updates
(HR562E)
1-year, 4-hour onsite, 24x7 coverage for hardware,
24x7 software phone support and software updates (HR561E)
1-year, 24x7 software phone support, software updates + Next
Business Day Hardware Exchange (U4D06E)
1-year, 24x7 software phone support, software updates + 4 hour
hardware exchange (U0S83E)
3-year, 24x7 software phone support, software updates + Next
Business Day Hardware Exchange (U4D57E)
3-year, 24x7 software phone support, software updates + 4 hour
Hardware Exchange (U0T34E)
4-year, 24x7 software phone support, software updates + Next
Business Day Hardware Exchange (U4E08E)
4-year, 24x7 software phone support, software updates +
4 hour Hardware Exchange (U0T85E)
5-year, 24x7 software phone support, software updates + Next
Business Day Hardware Exchange (U0S32E)
5-year, 24x7 software phone support, software updates + 4 hour
Hardware Exchange (U0U36E)
Refer to the HPE website at hp.com/networking/services for
details on the service-level descriptions and product numbers.
For details about services and response times in your area,
please contact your local HPE sales office.

Data sheet

Page 11

Standards and protocols


(applies to all products in series)
General protocols

IEEE 802.1ag Service Layer OAM


IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s (MSTP)
IEEE 802.1v VLAN classification by
Protocol and Port
IEEE 802.1w Rapid Reconfiguration of
Spanning Tree
IEEE 802.1X PAE
IEEE 802.3ad Link Aggregation Control
Protocol (LACP)

IEEE 802.3ae 10-Gigabit Ethernet


IEEE 802.3x Flow Control
RFC 768 UDP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 925 Multi-LAN Address Resolution
RFC 951 BOOTP
RFC 1058 RIPv1
RFC 1350 TFTP Protocol (revision 2)

IP multicast

RFC 2934 Protocol Independent


Multicast MIB for IPv4
RFC 3376 IGMPv3 (host joins only)

RFC 3618 Multicast Source Discovery Protocol RFC 4601 PIM Sparse Mode
(MSDP)
RFC 3973 Draft 2 PIM Dense Mode

IPv6

RFC 2080 RIPng for IPv6


RFC 2460 IPv6 Specification
RFC 2710 Multicast Listener Discovery
(MLD) for IPv6
RFC 2740 OSPFv3 for IPv6
RFC 2925 Remote Operations MIB
(Pingonly)
RFC 3019 MLDv1 MIB
RFC 3162 RADIUS and IPv6

RFC 3315 DHCPv6 (client and relay)


RFC 3315 DHCPv6 (client only)
RFC 3810 MLDv2 (host joins only)
RFC 4022 MIB for TCP
RFC 4251 SSHv6 Architecture
RFC 4252 SSHv6 Authentication
RFC 4253 SSHv6 Transport Layer

RFC 4254 SSHv6 Connection


RFC 4293 MIB for IP
RFC 4419 Key Exchange for SSH
RFC 4443 ICMPv6
RFC 4541 IGMP & MLD Snooping
Switch RFC 4861 IPv6 Neighbor
Discovery
RFC 4862 IPv6 Stateless Address
Auto-configuration

MIBs

IEEE8021-PAE-MIB
IEEE8023-LAG-MIB
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1657 BGP-4 MIB
RFC 1724 RIPv2 MIB
RFC 1850 OSPFv2 MIB
RFC 2011 SNMPv2 MIB for IP
RFC 2013 SNMPv2 MIB for UDP
RFC 2233 Interface MIB
RFC 2273 SNMP-NOTIFICATION-MIB
RFC 2452 IPV6-TCP-MIB

RFC 2454 IPV6-UDP-MIB


RFC 2465 IPv6 MIB
RFC 2466 ICMPv6 MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge
MIB RFC 2688 MAU-MIB
RFC 2787 VRRP MIB

RFC 2819 RMON MIB


RFC 2925 Ping MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
RFC 3621 Power Ethernet MIB
RFC 3826 AES for SNMPs USM MIB
RFC 4133 Entity MIB (Version 3)
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
LLDP-MIB

Network management

IEEE 802.1AB Link Layer Discovery


Protocol (LLDP)
RFC 2819 Four groups of RMON:
1(statistics), 2 (history), 3 (alarm)
and 9(events)

RFC 3176 sFlow


ANSI/TIA-1057 LLDP Media Endpoint
Discovery (LLDP-MED)

SNMPv1/v2c/v3

OSPF

RFC 2328 OSPFv2

RFC 3101 OSPF NSSA

Security

IEEE 802.1X Port Based Network Access RFC 2865 RADIUS (client only)
RFC 2866 RADIUS Accounting
Control
RFC 1492 TACACS+

RFC 1519 CIDR


RFC 1542 BOOTP Extensions
RFC 2131 DHCP
RFC 2453 RIPv2
RFC 3046 DHCP Relay Agent
Information Option
RFC 3576 Ext to RADIUS (CoA only)
RFC 3768 VRRP
RFC 4675 RADIUS VLAN & Priority
802.1r - GARP Proprietary Attribute
Registration Protocol (GPRP)

Secure Sockets Layer (SSL)


SSHv2 Secure Shell

Data sheet

HPE 5820 TAA-compliant Switch Series accessories


(applies to all products in series)
Transceivers

HPE X125 1G SFP LC LH40 1310nm Transceiver (JD061A)


HPE X125 1G SFP LC LH70 Transceiver (JD063B)
HPE X120 1G SFP LC SX Transceiver (JD118B)
HPE X120 1G SFP LC LX Transceiver (JD119B)
HPE X120 1G SFP LC LH40 1550nm Transceiver (JD062A)
HPE X130 10G SFP+ LC SR Transceiver (JD092B)
HPE X130 10G SFP+ LC LRM Transceiver (JD093B)
HPE X130 10G SFP+ LC LR Transceiver (JD094B)
HPE X130 10G SFP+ LC ER 40km Transceiver (JG234A)
HPE X130 10G SFP+ LC LH 80km Transceiver (JG915A)
HPE X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable (JD095C)
HPE X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable (JD096C)
HPE X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable (JD097C)
HPE X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable (JG081C)

Cables

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable (QK732A)


HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable (QK733A)
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable (QK734A)
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable (QK735A)
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable (QK736A)
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable (QK737A)

Power supply

HPE 5800 300W AC Power Supply (JC087A)


HPE 5800 300W DC Power Supply (JC090A

HPE 5820 TAA-compliant Switch model-specific accessories


HPE 5820-14XG-SFP+ TAA-compliant
Switch with 2 Interface Slots and
1 OAA Slot (JG259B)

HPE 5800 4-port 10GbE SFP+ Module (JC091A)


HPE 5800 2-port 10GbE SFP+ Module (JC092B)
HPE 5800 2RU Spare Fan Assembly (JC096A)

HPE 5820-24XG-SFP+
TAA-compliant Switch (JG243B)

HPE 5800 1RU Spare Fan Assembly (JC098A)

Learn more at

hp.com/networking

Sign up for updates

Copyright 20112012, 20142016 Hewlett Packard Enterprise Development LP. The information contained herein is subject to
change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
HewlettPackardEnterprise shall not be liable for technical or editorial errors or omissions contained herein.
sFlow is a registered trademark of InMon Corp.
4AA3-3800ENW, November 2016, Rev. 6

You might also like