Lighting - Some International Standards Rev-00

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

LED/OLED related Standards or Amendments - UNDER DEVELOPMENT

PRODUCT
LED Lamp > 50 V (230V)
Self-ballasted/Integrated
LED Lamp 50 V (12V)
Self-ballasted/Integrated
LED Lamp Non Selfballasted/Non-integrated
LED Double Capped Lamp
(Retrofit G5/G13 LED Tube)

SAFETY
62560

LED Double Capped Lamp


(Non-integrated GX16t-5
capped)
LED Module
LED Connector
LED Controlgear (Driver)
LED Luminaire
OLED panel

62931

System
IEC 62504:2014
EN 62504:2014
IEC 62471:2006
EN 62471:2008
IEC/TR 62471-2:2009
No EN version
IEC/TR 62778:2014
No EN version
Lamp / Module
IEC 62031:2008 + A2:2014
EN 62031:2008 + A2:2015
IEC 62717:2014
EN 62717 (To follow)
IEC 62560:2011 + A1:2015
EN 62560:2012 + A1:2015
IEC 62612:2013
EN 62612:2013
IEC 62776:2014
EN 62776:2015
IEC 60061 series
EN 60061 series
IEC 60838-2-2:2006
EN 60838-2-2:2006
IEC/TR 61341:2010
EN 61341:2011
IEC 61231:2010
EN 61231:2010
IEC 62707-1:2013
EN 62707-1:2013
Control Gear
IEC 61347-1:2015
EN 61347-1:2015
IEC 61347-2-13:2014
EN 61347-2-13:2014
IEC 62384:2009
EN 62384:2009
IEC 62442-3:2014
EN 62442-3:2014
IEC 62386-101:2014
EN 62386-101:2014
IEC 62386-102:2014
EN 62386-102:2014
IEC 62386-103:2014
EN 62386-103:2014
IEC 62386-207:2009
EN 62386-207:2009

Luminaire
IEC 60598 series
EN 60598 series
IEC 62722-1:2014
EN 62722-1 (to follow)
IEC 62722-2-1:2014
EN 62722-2-1 (to follow)
Measurement
CIE 127:2007
EN 13032-1:2012
EN 13032-2:2004
EN 13032-3:2007
EN 13032-3:2007

EMC
IEC 61547:2009
EN 61547:2009
IEC/TR 61547-1:2015
No EN version

PERFORMANCE
62612

New Standards
IEC 62838 Ed 1

62838
62663-1

62663-2

IEC 62922 Ed 1

Self-ballasted LED lamps for general lighting


services with supply voltages 50 V a.c. r.m.s. or
120 V d.c. - Safety specification
Organic light emitting diode (OLED) panels for
general lighting < 50 V - Performance requirements

Publication expected
2015

2016

62776
IEC/TS 62972 Ed 1

IEC 62663-1 Ed 1

General lighting Organic light emitting diode


(OLED) products and related equipment Terms
and definitions
Principal component reliability testing for LED
based products
GX16t-5 capped tubular LED lamp Safety
specifications
LED packages - Long-term luminous flux
maintenance projection
Non self-ballasted LED lamps - safety

IEC 62663-2 Ed 1

Non self-ballasted LED lamps - performance

IEC/TS 62861 Ed 1
62031
60838-2-2
61347-1; 61347-2-13
60598-1 60598-2-xx
62868

62717
62384
62722-1; 62722-2-1
62922

IEC 62931 Ed 1
IEC 63013 Ed 1

2016

2016
2017
2018

General lighting - Light emitting diode (LED) products and related


Photobiological safety of lamps and lamp systems

Amendments / New Editions

Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements
relating to non-laser optical radiation safety
Application of IEC 62471 to light sources and luminaires for the assessment of blue light hazard.

IEC 62717 Amd 1


IEC 62612 Amd 1

IEC 62504 Amd 1


LED Modules for General Lighting Safety Specifications

Publication expected
LED Modules for General Lighting - Performance
requirements (Annex LM-80 data)
Self-ballasted LED lamps for general lighting
services with supply voltages > 50 V - Performance
requirements
General lighting - Light emitting diode (LED)
products and related equipment - Terms and
definitions

2015
2015

2018

LED Modules for General Lighting - Performance requirements


Self-ballasted LED-lamps for general lighting services > 50 V - Safety specifications

Europe - LED Specifications / Regulations / Guidance

Self-ballasted LED lamps for general lighting services > 50 V - Performance requirements

244/2009
1194/2012

Double-capped LED lamps for general lighting services Safety specifications


Lamp caps and holders together with gauges for the control of interchangeability and safety
Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules

Ecodesign requirements for non-directional household lamps


Ecodesign requirements for directional lamps, light emitting diode lamps and
related equipment
874/2012 (& 518/2014)
Energy labelling of electrical lamps and luminaires
LightingEurope 1194/2012 Guide & Q&A
LightingEurope 874/2012 Guide & Q&A
LightingEurope Photobiological Safety Guide

Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
UK - LED Specifications / Guidance
International lamp coding system (ILCOS)
ECA criteria 2015
LED - Binning - Part 1: General requirements and white colour grid

Lamp controlgear - Part 1: General and safety requirements


Lamp controlgear - Part 2-13 : Particular requirements for d.c. or a.c. supplied electronic controlgear
for LED modules
DC or AC supplied electronic control gear for LED modules Performance requirements

White Light Emitting Diode Lighting Units for Amenity, Accent and Display
Lighting
A Guide to the Specification of LED Lighting Products 2012
SLL Code for Lighting 2006
SLL Lighting Handbook 2009
SLL Lighting Guides

USA - LED Standards / Guidance


IES LM-79-08

Energy performance of lamp controlgear - Part 3: Controlgear for halogen low voltage lamps and LED
modules - Method of measurement to determine the efficiency of the controlgear
Digital addressable lighting interface Part 101: General requirements - System

IES LM-80-08
IES LM-82-12
IES LM-84-14

Digital addressable lighting interface Part 102: General requirements - Control Gear

IES LM-85-14
IES TM-15-11
IES TM-16-05

Digital addressable lighting interface Part 103: General requirements - Control Devices
Digital addressable lighting interface Part 207: Particular requirements for control gear LED
modules (device type 6)

IES TM-21-11
IES TM-28-14

Luminaires - Part 1: General requirements and tests

IES RP-16-10
ANSI C78.50:2014
ANSI C78.79:2014
ANSI C78.377:2008
ANSI/UL 8750:2009

Luminaire performance - Part 1: General Requirements

Approved Method: Electrical and Photometric Measurements of Solid-State


Lighting Products
Approved Method: Lumen Maintenance Testing of LED Light Sources
LED Light Engine Measurements
Lumen and Color Maintenance Test for LED Lamps, Light Engines and
Luminaires
High Power LED Measurements
Luminaire Classification System for Outdoor Luminaires
Technical Memorandum on Light Emitting Diode (LED) Sources and Systems
Projecting Long Term Lumen Maintenance of LED Light Sources
Lumen Maintenance Projection for LED Lamps, Light Engines, and
Luminaires
Nomenclature and Definitions for Illuminating Engineering
Assigned LED Lamp Codes
Nomenclature for Envelope Shapes Intended for Use with Electric Lamps
Specifications for the Chromaticity of Solid State Lighting Devices
Outline of Investigation for Light-Emitting Diode (LED) Light Sources for Use in
Lighting Products
High-Power White LED Binning for General Illumination
Phase Cut Dimming for Solid State Lighting: Basic Compatibility

Luminaire performance - Part 2-1: Particular requirements for LED luminaires

NEMA SSL 3:2010


NEMA SSL 7A:2013

Measurement of LEDs
Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part
1: Measurement and file format
Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part
2: Lighting of indoor workplaces
Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part
3: Presentation of data for emergency lighting of workplaces
Light and lighting Measurement and presentation of photometric data - Part 4: LED lamps, modules
and luminaires

USA - LED Standards / Guidance - UNDER DEVELOPMENT


IES LM-79-08 Amd
IES LM-80-08 Amd
IES TM-21-11 Amd
IES TM-26-xx
IES TM-29-xx
IES TM-xx-xx
IES LM-86-xx

Equipment for general lighting purposes - EMC immunity requirements


Equipment for general lighting purposes - EMC immunity requirements Part 1: An objective voltage
fluctuation immunity test method

IEC 61000-3-2:2014
EN 61000-3-2:2014
CISPR 15:2013 + A1:2015
EN 55015:2013 + A1:2015

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions
(equipment input current 16 A per phase)
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and
similar equipment

EMF
IEC 62493:2015
EN 62493:2015

Assessment of lighting equipment related to human exposure to electromagnetic fields

OLED
IEC 62868: 2014
EN 62868 (to follow)

Organic light emitting diode (OLED) panels for general lighting < 50 V - Safety requirements

LED/OLED related Lighting Application Standards


Light and lighting - Lighting of work places Part 1: Indoor work places
EN 12464-1:2011
Light and lighting - Lighting of work places Part 2: Outdoor work places
EN 12464-2:2014
EN 12193:2007
Light and lighting - Sports lighting
CEN/TR 13201-1:2014
Road lighting - Part 1: Selection of lighting classes
EN 13201-2:2015
Road lighting - Part 2: Performance requirements
EN 13201-3:2015
Road lighting - Part 3: Calculation of performance
Road lighting - Part 4: Methods of measuring lighting performance
EN 13201-4:2015
Road Lighting - Part 5: Energy Efficiency Requirements
EN 13201-5:2015
EN 1838:2013
Lighting applications. Emergency lighting
CR 14380:2003
Lighting applications tunnel lighting
EN 16276:2013
Evacuation lighting in road tunnel

Committee of Testing Laboratories (CTL) /


Operational Staff Meeting (OSM) Decision Sheets
CTL/OSM
Self-ballasted LED lamps
DSH 0743
DSH 0745
Luminaire provided with LEDs
DSH 0748
Portable luminaire or Lighting chain
DSH 0749
Insulation of LED lamps
DSH 0812
LEDs used as a light source in luminaires
T8 to T5, T8 to T8 and similar lamp adaptors (including LED)
DSH 0814
DSH 0919A
Luminaires provided with LEDs
DSH 0951
Portable luminaire or lighting chain
DSH 1067
Clause 8 - Terminals
DSH 1069
Insulation in SELV transformer
DSH 1085
Accidental contact with live parts
DSH 1086
Insulation class MCPCB material used for LED modules

IES LM-87-xx
IES LM-88-xx
IES LM-xx-xx
ANSI C78.51
ANSI C78.374
ANSI C78.377 Amd
NEMA SSL 7A Amd
NEMA SSL 7B

Approved Method: Electrical and Photometric Measurements of Solid-State


Lighting Products
Approved Method: Lumen Maintenance Testing of LED Light Sources
Projecting Long Term Lumen Maintenance of LED Light Sources
Projection of LED Rated Life
Projecting Luminous Flux and Color Maintenance of Remote Phosphor
Components
Recommendations for Testing Color Tunable SSL Products
Approved Method for Measuring Luminous Flux and Color Maintenance of
Remote Phosphor Components
LED Reliability Testing
AC LED Measurements
Long-term Color Stability
LED Lamps, Method of Designation and Special Report for SSL Lamp Code
Designation
LED Specification Sheet for General Illuminating Applications
Specifications for the Chromaticity of Solid State Lighting Products
Phase Cut Dimming for Solid State Lighting: Basic Compatibility
Phase Cut Dimming for Solid State Lighting: Performance

You might also like