Software Testing Guide Book

Part I: Fundamentals of Software Testing

Ajitha Kruthiventy, Amrish Shah, Ashna Datye, Bharathy J, Deepa M G, James M, Jayapradeep
J, Jeffin Jacob M, Kapil Mohan Sharma, Leena Warrier, Mahesh, Michael Frank, Muhammad

Kashif Jamil Narendra N, Naveed M, Phaneendra Y, Prathima N, Ravi Kiran N, Rajeev D, Sarah
Salahuddin, Siva Prasad B, Shalini R, Shilpa D, Subramanian D Ramprasad, Sunitha C N, Sunil
Kumar M K, Usha Padmini K, Winston George and Harinath P V

Copyright (c) SofTReL 2004. Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License, Version 1.2 or any
later version published by the Free Software Foundation; with no Invariant Sections, no
Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the
section entitled "GNU Free Documentation License".

Software Testing Research Lab

http://www.SofTReL.org

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Revision History
Ver. No.
0.1

Date
06-Apr-04

Description
Initial document creation

Author
Harinath, on behalf

0.2

01-May-04

Incorporated Review Comments

of STGB Team.
Harinath, on behalf

0.3

03-July-04

Draft Release

of STGB Team.
Harinath, on behalf
of STGB Team

http://www.SofTReL.org

2 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Table of Contents

Software Testing Guide Book................................................................................1

1. The Software Testing Guide Book......................................................................6

Forward.........................................................................................................6
About SofTReL...............................................................................................7
Purpose of this Document.............................................................................7
Authors.........................................................................................................8
Intended Audience.........................................................................................9
How to use this Document.............................................................................9
What this Guide Book is not..........................................................................9
How to Contribute.........................................................................................9
Future Enhancements...................................................................................9
Copyrights.....................................................................................................9

2. What is Software Testing and Why is it Important?.........................................10

3. Types of Development Systems.......................................................................12

3.1
3.2
3.3
3.4

Traditional Development Systems..........................................................12

Iterative Development............................................................................12
Maintenance System..............................................................................12
Purchased/Contracted Software............................................................13

4. Types of Software Systems..............................................................................13

4.1 Batch Systems.......................................................................................13

4.2 Event Control Systems..........................................................................13
4.3 Process Control Systems........................................................................13
4.4 Procedure Control Systems....................................................................14
4.5 Advanced Mathematical Models.............................................................14
4.6 Message Processing Systems.................................................................14
4.7 Diagnostic Software Systems.................................................................14
4.8 Sensor and Signal Processing Systems..................................................14
4.9 Simulation Systems...............................................................................15
4.10 Database Management Systems...........................................................19
4.11 Data Acquisition .................................................................................19
4.12 Data Presentation ...............................................................................19
4.13 Decision and Planning Systems...........................................................19
4.14 Pattern and Image Processing Systems................................................19
4.15 Computer System Software Systems....................................................20
4.16 Software Development Tools................................................................20
5. Heuristics of Software Testing........................................................................20
6. When Testing should occur?...........................................................................24
7. The Test Development Life Cycle (TDLC).........................................................28
8. When should Testing stop?.............................................................................30
9. Verification Strategies....................................................................................30

9.1 Review...................................................................................................30
9.2 Walkthrough..........................................................................................33
http://www.SofTReL.org

3 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

9.3 Inspection..............................................................................................35
10. Testing Types and Techniques......................................................................36

10.1 White Box Testing................................................................................38

10.1.1 Basis Path Testing...........................................................................................42

10.1.2 Flow Graph Notation......................................................................................42
10.1.3 Cyclomatic Complexity..................................................................................42
10.1.4 Graph Matrices................................................................................................42
10.1.5 Control Structure Testing................................................................................43
10.1.6 Loop Testing...................................................................................................43
10.2 Black Box Testing ...............................................................................44

10.2.1 Graph Based Testing Methods........................................................................45

10.2.2 Error Guessing................................................................................................45
10.2.3 Boundary Value Analysis................................................................................45
10.2.4 Equivalence Partitioning.................................................................................46
10.2.5 Comparison Testing........................................................................................47
10.2.6 Orthogonal Array Testing................................................................................47
11. Designing Test Cases....................................................................................47
12. Validation Phase...........................................................................................48

12.1 Unit Testing.........................................................................................48

12.2 Integration Testing...............................................................................53

12.2.1 Top-Down Integration.....................................................................................53

12.2.2 Bottom-Up Integration....................................................................................53
12.3 System Testing....................................................................................54

12.3.1 Compatibility Testing......................................................................................54

12.3.2 Recovery Testing.............................................................................................55
12.3.3 Usability Testing.............................................................................................55
12.3.4 Security Testing...............................................................................................58
12.3.5 Stress Testing..................................................................................................58
12.3.6 Performance Testing ......................................................................................58
12.3.7 Content Management Testing.........................................................................68
12.3.8 Regression Testing .........................................................................................68
12.4
12.5
12.6
12.7

Alpha Testing.......................................................................................71
User Acceptance Testing......................................................................72
Installation Testing..............................................................................72
Beta Testing .......................................................................................73

13. Understanding Exploratory Testing...............................................................73

14. Understanding Scenario Based Testing..........................................................90
15. Understanding Agile Testing.........................................................................91
16. API Testing...................................................................................................96
17. Understanding Rapid Testing......................................................................103
18. Test Ware Development .............................................................................. 105

18.1 Test Strategy......................................................................................105

18.2 Test Plan...........................................................................................108
18.3 Test Case Documents........................................................................114

19. Defect Management....................................................................................120

http://www.SofTReL.org

4 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

19.1 What is a Defect?...............................................................................120

19.2 Defect Taxonomies.............................................................................120
19.3 Life Cycle of a Defect..........................................................................121
20. Metrics for Testing......................................................................................122
References.......................................................................................... ..............137
GNU Free Documentation License.....................................................................138

http://www.SofTReL.org

5 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

1. The Software Testing Guide Book

Forward
Software Testing has gained a phenomenal importance in the recent years in the
System Development Life Cycle. Many learned people have worked on the topic and
provided various techniques and methodologies for effective and efficient testing.
Today, even though we have many books and articles on Software Test Engineering,
many people are fallacious in understanding the underlying concepts of the subject.
Software Testing Guide Book (STGB) is an open source project aimed at bringing the
technicalities of Software Testing into one place and arriving at a common
understanding.
This guide book has been authored by professionals who have been exposed to Testing
various applications. We wanted to bring out a base knowledge bank where Testing
enthusiasts can start to learn the science and art of Software Testing, and this is how
this book has come out.
This guide book does not provide any specific methodologies to be followed for Testing,
instead provides a conceptual understanding of the same.
Note to the Reader:
It is not our intention to tell you that this is a one-stop place for learning Testing. This
is just a guide. Many eminent scientists have researched every topic you find in this
book. We have just compiled everything in one place and made sure we explained each
topic relating it to the practical world as we experienced it. If you find any subject
matter that might look like we have copied from any existing book, we request you to let
us know. It is not our intention to copy any material, and we brought out this book just
to help Testing aspirants to have a basic understanding of the subject and guide them
to be good at their job. All the material in this document is written in plain English, as
we understand testing.
Please send in your comments, suggestions or a word of encouragement to the team.
Regards,
The SofTReL Team

http://www.SofTReL.org

6 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

About SofTReL
The Software Testing Research Lab (SofTReL) is a non-profit organization dedicated for
Research and Advancements of Software Testing.
The concept of having a common place for Software Testing Research was formulated in
2001. Initially we named it Software Quality and Engineering. Recently in March 2004,
we renamed it to Software Testing Research Lab SofTReL.
Professionals who are currently working with the industry and possess rich experience
in testing form the members of the Lab.
Visit http://www.softrel.org for more information.

Purpose of this Document

This document does not provide the reader with short cuts to perform testing in daily
life, but instead explains the various methodologies and techniques which have been
proposed by eminent scientists in an easy and understandable way.
This guide book is divided into three parts:
Part I Fundamentals of Software Testing
This section addresses the fundamentals of Software Testing and their practical
application in real life.
Part II Software Testing for various Architectures
This section would concentrate in explaining testing applications under various
architectures like Client/Server, Web, Pocket PC, Mobile and Embedded.
Part III Platform Specific Testing
This section addresses testing C++ and Java applications using white box testing
methodologies.
This is Part I. All updates on the project are available at
http://www.SofTReL.org/stgb.html.

http://www.SofTReL.org

7 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Authors
The guide book has been authored by professionals who Test everyday.
Ajitha Kruthiventy - GrayLogic Corporation, New Jersey, USA
Amrish Shah - MAQSoftware, Mumbai
Ashna Datye - RS Tech Inc, Canada
Bharathy Jayaraman - Ivesia Solutions (I) Pvt Limited, Chennai
Deepa M G - Ocwen Technology Xchange, Bangalore
James M - CSS, Chennai
Jayapradeep Jiothis - Satyam Computer Services, Hyderabad
Jeffin Jacob Mathew - ICFAI Business School, Hyderabad
Kapil Mohan Sharma - Pixtel Communitations, New Delhi
Leena Warrier Wipro Technologies, Bangalore
Mahesh, iPointSoft, Hyderabad
Michael Frank - USA
Muhammad Kashif Jamil, Avanza Solutions, Karachi, Pakistan
Narendra Nagaram Satyam Computer Services, Hyderabad
Naveed Mohammad vMoksha, Bangalore
Phaneendra Y - Wipro Technologies, Bangalore
Prathima Nagaprakash Wipro Technologies, Bangalore
Ravi Kiran N - Andale, Bangalore
Rajeev Daithankar - Persistent Systems Pvt. Ltd., Pune
Sarah Salahuddin - Arc Solutions, Pakistan
Siva Prasad Badimi - Danlaw Technologies, Hyderabad
Shalini Ravikumar - USA
Shilpa Dodla - Decatrend Technologies, Chennai
Subramanian Dattaramprasad - MindTeck, Bangalore
Sunitha C N - Infosys Technologies, Mysore
Sunil Kumar M K Yahoo! India, Bangalore
Usha Padmini Kandala - Virtusa Corp, Massachusetts
Winston George VbiZap Soft Solutions (P) Ltd., Chennai
Harinath SofTReL, Bangalore

http://www.SofTReL.org

8 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Intended Audience
This guide book is aimed at all Testing Professionals from a beginner to an advanced
user. This book would provide a baseline understanding of the conceptual theory.

How to use this Document

This book can be used as a guide for performing the Testing activities. A guide here, we
mean that this can provide you a road map as to how to approach a specific problem
with respect to Testing.

What this Guide Book is not

This guide book is definitely not a silver/gold/diamond bullet which can help you to
test any application. Instead this book would be reference help to perform Testing.

How to Contribute
This is an open source project. If you are interested in contributing to the book or to the
Lab, please do write in to stgb at SoFTReL dot org. We need your expertise in the
research activities.

Future Enhancements
This is the first part of the three-part Software Testing Guide Book (STGB) series. You
can visit http://www.softrel.org/stgb.html for updates on the Project.

Copyrights
SofTReL is not proposing the Testing methodologies, types and various other concepts.
We tried presenting each and every theoretical concept of Software Testing with a live
example for easier understanding of the subject and arriving at a common
understanding of Software Test Engineering.
However, we did put in few of our proposed ways to achieve specific tasks and these are
governed

by

The

GNU

Free

Documentation

License

(GNU-FDL).

Please

visit

http://www.gnu.org/doc/doc.html for complete guidelines of the license or alternatively

you can find the license towards the end of this document

http://www.SofTReL.org

9 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

2. What is Software Testing and Why is it Important?

A brief history of Software engineering and the SDLC.
The software industry has evolved through 4 eras, 50s 60s, mid 60s late 70s, mid
70s- mid 80s, and mid 80s-present. Each era has its own distinctive characteristics,
but over the years the softwares have increased in size and complexity. Several
problems are common to almost all of the eras and are discussed below.
The Software Crisis dates back to the 1960s when the primary reasons for this
situation were less than acceptable software engineering practices. In the early stages of
software there was a lot of interest in computers, a lot of code written but no
established standards. Then in early 70s a lot of computer programs started failing and
people lost confidence and thus an industry crisis was declared. Various reasons
leading to the crisis included:

Hardware advances outpacing the ability to build software for this hardware.

The ability to build in pace with the demands.

Increasing dependency on softwares

Struggle to build reliable and high quality software

Poor design and inadequate resources.

This crisis though identified in the early years, exists to date and we have examples of
software failures around the world. Software is basically considered a failure if the
project is terminated because of costs or overrun schedules, if the project has
experienced overruns in excess of 50% of the original or if the software results in client
lawsuits. Some examples of failures include failure of Air traffic control systems, failure
of medical software, and failure in telecommunication software. The primary reason for
these failures other than those mentioned above is due to bad software engineering
practices adopted. Some of the worst software practices include:

No historical software-measurement data.

Rejection of accurate cost estimates.

Failure to use automated estimating and planning tools.

Excessive, irrational schedule pressure and creep in user requirements.

Failure to monitor progress and to perform risk management.

Failure to use design reviews and code inspections.

To avoid these failures and thus improve the record, what is needed is a better
understanding of the process, better estimation techniques for cost time and quality
measures. But the question is, what is a process? Process transform inputs to outputs
http://www.SofTReL.org

10 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

i.e. a product. A software process is a set of activities, methods and practices involving
transformation that people use to develop and maintain software.
At present a large number of problems exist due to a chaotic software process and the
occasional success depends on individual efforts. Therefore to be able to deliver
successful software projects, a focus on the process is essential since a focus on the
product alone is likely to miss the scalability issues, and improvements in the existing
system. This focus would help in the predictability of outcomes, project trends, and
project characteristics.
The process that has been defined and adopted needs to be managed well and thus
process management comes into play.

Process management is concerned with the

knowledge and management of the software process, its technical aspects and also
ensures that the processes are being followed as expected and improvements are
shown.
From this we conclude that a set of defined processes can possibly save us from
software project failures. But it is nonetheless important to note that the process alone
cannot help us avoid all the problems, because with varying circumstances the need
varies and the process has to be adaptive to these varying needs. Importance needs to
be given to the human aspect of software development since that alone can have a lot of
impact on the results, and effective cost and time estimations may go totally waste if the
human resources are not planned and managed effectively. Secondly, the reasons
mentioned related to the software engineering principles may be resolved when the
needs are correctly identified. Correct identification would then make it easier to
identify the best practices that can be applied because one process that might be
suitable for one organization may not be most suitable for another.
Therefore to make a successful product a combination of Process and Technicalities will
be required under the umbrella of a well-defined process.
Having talked about the Software process overall, it is important to identify and relate
the role software testing plays not only in producing quality software but also
maneuvering the overall process.
The computer society defines testing as follows: Testing -- A verification method that
applies a controlled set of conditions and stimuli for the purpose of finding errors. This
is the most desirable method of verifying the functional and performance requirements.
Test results are documented proof that requirements were met and can be repeated.
The resulting data can be reviewed by all concerned for confirmation of capabilities.
http://www.SofTReL.org

11 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

There may be many definitions of software testing and many which appeal to us from
time to time, but its best to start by defining testing and then move on depending on
the requirements or needs.

3. Types of Development Systems

The type of development project refers to the environment/methodology in which the
software will be developed. Different testing approaches need to be used for different
types of projects, just as different development approaches.

3.1 Traditional Development Systems

The Traditional Development System has the following characteristics:

The traditional development system uses a system development methodology.

The user knows what the customer requires (Requirements are clear from the
customer).

The development system determines the structure of the application.

What do you do while testing:

Testing happens at the end of each phase of development.

Testing should concentrate if the requirements match the development.

Functional testing is required.

3.2 Iterative Development

During the Iterative Development:

The requirements are not clear from the user (customer).

The structure of the software is pre-determined.

Testing of Iterative Development projects should concentrate only if the CASE

(Computer Aided Software Engineering) tools are properly utilized and the functionality
is thoroughly tested.

3.3 Maintenance System

The Maintenance System is where the structure of the program undergoes changes. The
system is developed and being used, but it demands changes in the functional aspects
of the system due to various reasons.
Testing Maintenance Systems requires structural testing. Top priority should be put
into Regression Testing.

http://www.SofTReL.org

12 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

3.4 Purchased/Contracted Software

At times it may be required that you purchase software to integrate with your product
or outsource the development of certain components of your product. This is Purchased
or Contracted Software.
When you need to integrate third party software to your existing software, this demands
the testing of the purchased software with your requirements. Since the two systems
are designed and developed differently, the integration takes the top priority during
testing. Also, Regression Testing of the integrated software is a must to cross check if
the two softwares are working as per the requirements.

4. Types of Software Systems

The type of software system refers to the processing that will be performed by that
system. This contains the following software system types.

4.1 Batch Systems

The Batch Systems are a set of programs that perform certain activities which do not
require any input from the user.
A practical example is that when you are typing something on a word document, you
press the key you require and the same is printed on the monitor.

But processing

(converting) the user input of the key to the machine understandable language, making
the system understand what to be displayed and in return the word document
displaying what you have typed is performed by the batch systems. These batch
systems contain one or more Application Programming Interface (API) which perform
various tasks.

4.2 Event Control Systems

Event Control Systems process real time data to provide the user with results for what
command (s) he is given.
For example, when you type on the word document and press Ctrl + S, this tells the
computer to save the document. How this is performed instantaneously? These real
time command communications to the computer are provided by the Event Controls
that are pre-defined in the system.

4.3 Process Control Systems

There are two or more different systems that communicate to provide the end user a
specific utility. When two systems communicate, the co-ordination or data transfer
becomes vital. Process Control Systems are the ones which receive data from a different
http://www.SofTReL.org

13 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

system and instructs the system which sent the data to perform specific tasks based on
the reply sent by the system which received the data.

4.4 Procedure Control Systems

Procedure Control Systems are the ones which control the functions of another system.

4.5 Advanced Mathematical Models

Systems, which make use of heavy mathematics, fall into the category of Mathematical
Models. Usually all the computer software make use of mathematics in some way or the
other. But, Advance Mathematical Models can be classified when there is heavy
utilization of mathematics for performing certain actions. An example of Advanced
Mathematical Model can be simulation systems which uses graphics and controls the
positioning of software on the monitor or Decision and Strategy making softwares.

4.6 Message Processing Systems

A simple example is the SMS management software used by Mobile operators which
handle incoming and outgoing messages. Another system, which is noteworthy is the
system used by paging companies.

4.7 Diagnostic Software Systems

The Diagnostic Software System is one that helps in diagnosing the computer hardware
components.
When you plug in a new device to your computer and start it, you can see the
diagnostic software system doing some work. The New Hardware Found dialogue can
be seen as a result of this system. Today, almost all the Operating Systems come
packed with Diagnostic Software Systems.

4.8 Sensor and Signal Processing Systems

The message processing systems help in sending and receiving messages. The Sensor
and Signal Processing Systems are more complex because these systems make use of
mathematics for signal processing. In a signal processing system the computer receives
input in the form of signals and then transforms the signals to a user understandable
output.

http://www.SofTReL.org

14 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

4.9 Simulation Systems

A simulation system is a software application, some times used in combination with
specialized hardware, which re-creates or simulates the complex behavior of a system in
its real environment. It can be defined in many ways:
"The process of designing a model of a real system and conducting experiments with
this model for the purpose of understanding the behavior of the system and/or
evaluating various strategies for the operation of the system"-- Introduction to
Simulation Using SIMAN, by C. D. Pegden, R. E. Shannon and R. P. Sadowski, McGrawHill, 1990.
A simulation is a software package (sometimes bundled with special hardware input
devices) that re-creates or simulates, albeit in a simplified manner, a complex
phenomena, environment, or experience, providing the user with the opportunity for
some new level of understanding. It is interactive, and usually grounded in some
objective reality. A simulation is based on some underlying computational model of the
phenomena, environment, or experience that it is simulating. (In fact, some authors use
model and modeling as synonyms of simulation.)" --Kurt Schumaker, A Taxonomy of
Simulation Software." Learning Technology Review.
In simple words simulation is nothing but a representation of a real system. In a
programmable environment, simulations are used to study system behavior or test the
system in an artificial environment that provides a limited representation of the real
environment.
Why Simulation Systems
Simulation systems are easier, cheaper, and safer to use than real systems, and often
the only way to build the real systems.

For example, learning to fly a fighter plane

using a simulator is much safer and less expensive than learning on a real fighter
plane. System simulation mimics the operation of a real system such as the operation
in a bank, or the running of the assembly line in a factory etc.
Simulation in the early stage of design cycle is important because the cost of mistakes
increases dramatically later in the product life cycle. Also, simulation software can
analyze the operation of a real system without the involvement of an expert, i.e. it can
also be analyzed with a non-expert like a manager.
How to Build Simulation Systems
In order to create a simulation system we need a realistic model of the system behavior.
One way of simulation is to create smaller versions of the real system.
http://www.SofTReL.org

15 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

The simulation system may use only software or a combination of software and
hardware to model the real system. The simulation software often involves the
integration of artificial intelligence and other modeling techniques.
What applications fall under this category?
Simulation is widely used in many fields. Some of the applications are:

Models of planes and cars that are tested in wind tunnels to determine the
aerodynamic properties.

Used in computer Games (E.g. SimCity, car games etc). This simulates the
working in a city, the roads, people talking, playing games etc.

War tactics that are simulated using simulated battlefields.

Most Embedded Systems are developed by simulation software before they ever
make it to the chip fabrication labs.

Stochastic simulation models are often used to model applications such as

weather forecasting systems.

Social simulation is used to model socio-economic situations.

It is extensively used in the field of operations research.

What are the Characteristics of Simulation Systems?

Simulation Systems can be characterized in numerous ways depending on the
characterization criteria applied. Some of them are listed below.
Deterministic Simulation Systems
Deterministic Simulation Systems have completely predictable outcomes. That is, given
a certain input we can predict the exact outcome. Another feature of these systems is
idempotency, which means that the results for any given input are always the same.
Examples include population prediction models, atmospheric science etc.
Stochastic Simulation Systems
Stochastic Simulation systems have models with random variables. This means that the
exact outcome is not predictable for any given input, resulting in potentially very
different outcomes for the same input.
Static Simulation Systems
Static Simulation systems use statistical models in which time does not play any role.
These models include various probabilistic scenarios which are used to calculate the
results of any given input. Examples of such systems include financial portfolio
valuation models. The most common simulation technique used in these models is the
Monte Carlo Simulation.

http://www.SofTReL.org

16 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Dynamic Simulation Systems

A dynamic simulation system has a model that accommodates for changes in data over
time.

This means that the input data affecting the results will be entered into the

simulation during its entire lifetime than just at the beginning. A simulation system
used to predict the growth of the economy may need to incorporate changes in
economic data, is a good example of a dynamic simulation system.
Discrete Simulation Systems
Discrete Simulation Systems use models that have discrete entities with multiple
attributes. Each of these entities can be in any state, at any given time, represented by
the values of its attributes. . The state of the system is a set of all the states of all its
entities.
This state changes one discrete step at a time as events happens in the system.
Therefore, the actual designing of the simulation involves making choices about which
entities to model, what attributes represent the Entity State, what events to model, how
these events impact the entity attributes, and the sequence of the events. Examples of
these systems are simulated battlefield scenarios, highway traffic control systems,
multiteller systems, computer networks etc.
Continuous Simulation Systems
If instead of using a model with discrete entities we use data with continuous values,
we will end up with continuous simulation. For example instead of trying to simulate
battlefield scenarios by using discrete entities such as soldiers and tanks, we can try to
model behavior and movements of troops by using differential equations.
Social Simulation Systems
Social simulation is not a technique by itself but uses the various types of simulation
described above. However, because of the specialized application of those techniques for
social simulation it deserves a special mention of its own.
The field of social simulation involves using simulation to learn about and predict
various social phenomenon such as voting patterns, migration patterns, economic
decisions made by the general population, etc. One interesting application of social
simulation is in a field called artificial life which is used to obtain useful insights into
the formation and evolution of life.
What can be the possible test approach?
A simulation systems primary responsibility is to replicate the behavior of the real
system as accurately as possible. Therefore, a good place to start creating a test plan
would be to understand the behavior of the real system.
http://www.SofTReL.org

17 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Subjective Testing
Subjective testing mainly depends on an expert's opinion. An expert is a person who is
proficient and experienced in the system under test. Conducting the test involves test
runs of the simulation by the expert and then the expert evaluates and validates the
results based on some criteria.
One advantage of this approach over objective testing is that it can test those conditions
which cannot be tested objectively. For example, an expert can determine whether the
joystick handling of the flight feels "right".
One disadvantage is that the evaluation of the system is based on the "expert's" opinion,
which may differ from expert to expert. Also, if the system is very large then it is bound
to have many experts. Each expert may view it differently and can give conflicting
opinions. This makes it difficult to determine the validity of the system. Despite all
these disadvantages, subjective testing is necessary for testing systems with human
interaction.
Objective Testing
Objective testing is mainly used in systems where the data can be recorded while the
simulation is running. This testing technique relies on the application of statistical and
automated methods to the data collected.
Statistical methods are used to provide an insight into the accuracy of the simulation.
These methods include hypothesis testing, data plots, principle component analysis and
cluster analysis.
Automated testing requires a knowledge base of valid outcomes for various runs of
simulation. This knowledge base is created by domain experts of the simulation system
being tested. The data collected in various test runs is compared against this knowledge
base to automatically validate the system under test. An advantage of this kind of
testing is that the system can continually be regression tested as it is being developed.
Statistical Methods
Statistical methods are used to provide an insight into the accuracy of the simulation.
These methods include hypothesis testing, data plots, principle component analysis and
cluster analysis.
Automated Testing
Automated testing requires a knowledge base of valid outcomes for various runs of
simulation. This knowledge base is created by domain experts of the simulation system
being tested. The data collected in various test runs is compared against this knowledge
base to automatically validate the system under test. An advantage of this kind of
testing is that the system can continually be regression tested as it is being developed.
http://www.SofTReL.org

18 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

4.10 Database Management Systems

As the name denotes, the Database Management Systems (DBMS) handles the
management of databases. It is basically a collection of programs that enable the
storage, modification and extraction from the Database. The DBMS, as they are often
referred to as, can be of various different types ranging from small systems that run on
PCs to Mainframes. The following can be categorized as example of DBMS:

Computerized Library Systems.

Automated Teller Machines.

Passenger Reservation Systems.

Inventory Systems.

4.11 Data Acquisition

Data Acquisition systems, taken in real time data and store them for future use. A
simple example of Data Acquisition system can be a ATC (Air Traffic Control) Software
which takes in real time data of the position and speed of the flight and stores it in
compressed form for later use.

4.12 Data Presentation

Data Presentation software stores data and displays the same to the user when
required. An example is a Content Management System. You have a web site and this is
in English, you also have your web site in other languages. The user can select the
language he wishes to see and the system displays the same web site in the user
chosen language. You develop your web site in various languages and store them on
the system. The system displays the required language, the user chooses.

4.13 Decision and Planning Systems

These systems use Artificial Intelligence techniques to provide decision-making
solutions to the user.

4.14 Pattern and Image Processing Systems

These systems are used for scanning, storing, modifying and displaying graphic images.
The use of such systems is now being increased as research tests are being conducted
in visual modeling and their use in our daily lives is increasing. These systems are used
for security requests such as diagnosing photograph, thumb impression of the visitor
etc.
http://www.SofTReL.org

19 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

4.15 Computer System Software Systems

These are the normal computer softwares, that can be used for various purposes.

4.16 Software Development Tools

These systems ease the process of Software Development.

5. Heuristics of Software Testing

Testability
Software testability is how easily, completely and conveniently a computer program can
be tested.
Software engineers design a computer product, system or program keeping in mind the
product testability. Good programmers are willing to do things that will help the testing
process and a checklist of possible design points, features and so on can be useful in
negotiating with them.
Here are the two main heuristics of software testing.
1. Visibility
2. Control
Visibility
Visibility is our ability to observe the states and outputs of the software under test.
Features to improve the visibility are

Access to Code
Developers must provide full access (source code, infrastructure, etc) to testers.
The Code, change records and design documents should be provided to the
testing team. The testing team should read and understand the code.

Event logging
The events to log include User events, System milestones, Error handling and
completed transactions. The logs may be stored in files, ring buffers in memory,
and/or serial ports. Things to be logged include description of event, timestamp,
subsystem, resource usage and severity of event. Logging should be adjusted by
subsystem and type. Log file report internal errors, help in isolating defects, and
give useful information about context, tests, customer usage and test coverage.
The more readable the Log Reports are, the easier it becomes to identify the
defect cause and work towards corrective measures.

http://www.SofTReL.org

20 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Error detection mechanisms

Data integrity checking and System level error detection (e.g. Microsoft
Appviewer) are useful here. In addition, Assertions and probes with the following
features are really helpful

Code is added to detect internal errors.

Assertions abort on error.

Probes log errors.

Design

by

Contract

theory---This

technique

requires

that

assertions be defined for functions. Preconditions apply to input

and violations implicate calling functions while post-conditions
apply to outputs and violations implicate called functions. This
effectively solves the oracle problem for testing.

Resource Monitoring
Memory usage should be monitored to find memory leaks. States of running
methods, threads or processes should be watched (Profiling interfaces may be
used for this.). In addition, the configuration values should be dumped.
Resource monitoring is of particular concern in applications where the load on
the application in real time is estimated to be considerable.

Control
Control refers to our ability to provide inputs and reach states in the software under
test.
The features to improve controllability are:

Test Points
Allow data to be inspected, inserted or modified at points in the software. It is
especially useful for dataflow applications. In addition, a pipe and filters
architecture provides many opportunities for test points.

Custom User Interface controls

Custom UI controls often raise serious testability problems with GUI test drivers.
Ensuring testability usually requires:

Adding methods to report necessary information

Customizing test tools to make use of these methods

Getting a tool expert to advise developers on testability and to

build the required support.

http://www.SofTReL.org

21 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Asking third party control vendors regarding support by test

tools.

Test Interfaces
Interfaces may be provided specifically for testing e.g. Excel and Xconq etc.
Existing interfaces may be able to support significant testing e.g. InstallSheild,
AutoCAD, Tivoli, etc.

Fault injection
Error seeding---instrumenting low level I/O code to simulate errors---makes it
much easier to test error handling. It can be handled at both system and
application level, Tivoli, etc.

Installation and setup

Testers should be notified when installation has completed successfully. They
should be able to verify installation, programmatically create sample records
and run multiple clients, daemons or servers on a single machine.

A BROADER VIEW
Below are given a broader set of characteristics (usually known as James Bach
heuristics) that lead to testable software.

Categories of Heuristics of software testing

Operability
The better it works, the more efficiently it can be tested.
The system should have few bugs, no bugs should block the execution of tests
and the product should evolve in functional stages (simultaneous development
and testing).

Observability
What we see is what we test.

Distinct output should be generated for each input

Current and past system states and variables should be visible

during testing

All factors affecting the output should be visible.

Incorrect output should be easily identified.

Source code should be easily accessible.

http://www.SofTReL.org

22 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Internal errors should be automatically detected (through self-testing

mechanisms) and reported.

Controllability
The better we control the software, the more the testing process can be automated
and optimized.
Check that

All outputs can be generated and code can be executed through

some combination of input.

Software and hardware states can be controlled directly by the

test engineer.

Inputs and output formats are consistent and structured.

Test can be conveniently, specified, automated and reproduced.

Decomposability
By controlling the scope of testing, we can quickly isolate problems and perform
effective and efficient testing.
The software system should be built from independent modules which can be
tested independently.

Simplicity
The less there is to test, the more quickly we can test it.
The points to consider in this regard are functional (e.g. minimum set of
features), structural (e.g. architecture is modularized) and code (e.g. a coding
standard is adopted) simplicity.

Stability
The fewer the changes, the fewer are the disruptions to testing.
The changes to software should be infrequent, controlled and not invalidating
existing tests. The software should be able to recover well from failures.

Understandability
The more information we will have, the smarter we will test.
The testers should be able to understand well the design, changes to the design
and the dependencies between internal, external and shared components.
Technical

documentation

should

be

instantly

accessible,

accurate,

well

organized, specific and detailed.

Suitability
The more we know about the intended use of the software, the better we can
organize our testing to find important bugs.

http://www.SofTReL.org

23 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

The above heuristics can be used by a software engineer to develop a software

configuration (i.e. program, data and documentation) that is convenient to test and
verify.

6. When Testing should occur?

Wrong Assumption
Testing is sometimes incorrectly thought as an after-the-fact activity; performed after
programming is done for a product. Instead, testing should be performed at every
development stage of the product .Test data sets must be derived and their correctness
and consistency should be monitored throughout the development process. If we divide
the

lifecycle

of

software

development

into

Requirements

Analysis,

Design,

Programming/Construction and Operation and Maintenance, then testing should

accompany each of the above phases. If testing is isolated as a single phase late in the
cycle, errors in the problem statement or design may incur exorbitant costs. Not only
must the original error be corrected, but the entire structure built upon it must also be
changed. Therefore, testing should not be isolated as an inspection activity. Rather
testing should be involved throughout the SDLC in order to bring out a quality product.
Testing Activities in Each Phase
The following testing activities should be performed during the phases

Requirements Analysis - (1) Determine correctness (2) Generate functional test

data.

Design

(1)

Determine

correctness

and

consistency

(2)

Generate

structural and functional test data.

Programming/Construction - (1) Determine correctness and consistency (2)

Generate structural and functional test data (3) Apply test data (4) Refine test
data.

Operation and Maintenance - (1) Retest.

Now we consider these in detail.

Requirements Analysis
The following test activities should be performed during this stage.
http://www.SofTReL.org

24 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Invest in analysis at the beginning of the project - Having a clear, concise and
formal

statement

of

the

requirements

facilitates

programming,

communication, error analysis an d test data generation.

The requirements statement should record the following information and
decisions:
1. Program function - What the program must do?
2. The form, format, data types and units for input.
3. The form, format, data types and units for output.
4. How exceptions, errors and deviations are to be handled.
5. For scientific computations, the numerical method or at least the
required accuracy of the solution.
6. The hardware/software environment required or assumed (e.g. the
machine, the operating system, and the implementation language).
Deciding the above issues is one of the activities related to testing that
should be performed during this stage.

Start developing the test set at the requirements analysis phase - Data should
be generated that can be used to determine whether the requirements have
been met. To do this, the input domain should be partitioned into classes of
values that the program will treat in a similar manner and for each class a
representative element should be included in the test data. In addition,
following should also be included in the data set: (1) boundary values (2) any
non-extreme input values that would require special handling.
The output domain should be treated similarly.
Invalid input requires the same analysis as valid input.

The correctness, consistency and completeness of the requirements should

also be analyzed - Consider whether the correct problem is being solved,
check for conflicts and inconsistencies among the requirements and consider
the possibility of missing cases.

Design
The design document aids in programming, communication, and error analysis and test
data generation. The requirements statement and the design document should together
http://www.SofTReL.org

25 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

give the problem and the organization of the solution i.e. what the program will do and
how it will be done.
The design document should contain:

Principal data structures.

Functions, algorithms, heuristics or special techniques used for processing.

The program organization, how it will be modularized and categorized into

external and internal interfaces.

Any additional information.

Here the testing activities should consist of:

Analysis of design to check its completeness and consistency - the total process
should be analyzed to determine that no steps or special cases have been
overlooked. Internal interfaces, I/O handling and data structures should
specially be checked for inconsistencies.

Analysis of design to check whether it satisfies the requirements - check whether

both requirements and design document contain the same form, format, units
used for input and output and also that all functions listed in the requirement
document have been included in the design document. Selected test data which
is generated during the requirements analysis phase should be manually
simulated to determine whether the design will yield the expected values.

Generation of test data based on the design - The tests generated should cover
the structure as well as the internal functions of the design like the data
structures, algorithm, functions, heuristics and general program structure etc.
Standard extreme and special values should be included and expected output
should be recorded in the test data.

Reexamination and refinement of the test data set generated at the requirements
analysis phase.

The first two steps should also be performed by some colleague and not only the
designer/developer.
Programming/Construction
http://www.SofTReL.org

26 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Here the main testing points are:

Check the code for consistency with design - the areas to check include modular
structure, module interfaces, data structures, functions, algorithms and I/O
handling.

Perform the Testing process in an organized and systematic manner with test runs
dated, annotated and saved. A plan or schedule can be used as a checklist to
help the programmer organize testing efforts. If errors are found and changes
made to the program, all tests involving the erroneous segment (including those
which resulted in success previously) must be rerun and recorded.

Asks some colleague for assistance - Some independent party, other than the
programmer of the specific part of the code, should analyze the development
product at each phase. The programmer should explain the product to the party
who will then question the logic and search for errors with a checklist to guide
the search. This is needed to locate errors the programmer has overlooked.

Use available tools - the programmer should be familiar with various compilers
and interpreters available on the system for the implementation language being
used because they differ in their error analysis and code generation capabilities.

Apply Stress to the Program - Testing should exercise and stress the program
structure, the data structures, the internal functions and the externally visible
functions or functionality. Both valid and invalid data should be included in the
test set.

Test one at a time - Pieces of code, individual modules and small collections of
modules should be exercised separately before they are integrated into the total
program, one by one. Errors are easier to isolate when the no. of potential
interactions should be kept small. Instrumentation-insertion of some code into
the program solely to measure various program characteristics can be useful
here. A tester should perform array bound checks, check loop control variables,
determine whether key data values are within permissible ranges, trace program
execution, and count the no. of times a group of statements is executed.

http://www.SofTReL.org

27 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Measure testing coverage/When should testing stop? - If errors are still found
every time the program is executed, testing should continue. Because errors
tend to cluster, modules appearing particularly error-prone require special
scrutiny.
The metrics used to measure testing thoroughness include statement testing
(whether each statement in the program has been executed at least once),
branch testing (whether each exit from each branch has been executed at least
once) and path testing (whether all logical paths, which may involve repeated
execution of various segments, have been executed at least once). Statement
testing is the coverage metric most frequently used as it is relatively simple to
implement.
The amount of testing depends on the cost of an error. Critical programs or
functions require more thorough testing than the less significant functions.

Operations and maintenance

Corrections, modifications and extensions are bound to occur even for small programs
and testing is required every time there is a change. Testing during maintenance is
termed regression testing. The test set, the test plan, and the test results for the original
program should exist. Modifications must be made to accommodate the program
changes, and then all portions of the program affected by the modifications must be retested. After regression testing is complete, the program and test documentation must
be updated to reflect the changes.

7. The Test Development Life Cycle (TDLC)

Usually, Testing is considered as a part of the System Development Life Cycle. With our
practical experience, we framed this Test Development Life Cycle.
The diagram does not depict where and when you write your Test Plan and Strategy
documents. But, it is understood that before you begin your testing activities these
documents should be ready. Ideally, when the Project Plan and Project Strategy are
being made, this is the time when the Test Plan and Test Strategy documents are also
made.

http://www.SofTReL.org

28 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Test Development Life Cycle (TDLC)

Requirement Study

Requirement Checklist

Software Requirement
Specification

Software Requirement
Specification

Functional Specification
Checklist

Functional Specification
Document

Functional Specification
Document

Architecture Design

Architecture Design

Detailed Design Document

Coding
Functional Specification
Document

Unit Test Case Documents

Unit Test Case Document

Design Document
Functional Specification
Document

Unit/Integration/System
Test Case Documents

Functional Specification
Document
Performance Criteria

System Test Case

Document
Integration Test Case
Document
Regression Test Case
Document

Performance Test Cases

and Scenarios

Software Requirement
Specification
Regression Test Case
Document

User Acceptance Test Case

Documents/Scenarios

Performance Test Cases

and Scenarios

http://www.SofTReL.org

29 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

8. When should Testing stop?

"When to stop testing" is one of the most difficult questions to a test engineer.
The following are few of the common Test Stop criteria:
1. All the high priority bugs are fixed.
2. The rate at which bugs are found is too small.
3. The testing budget is exhausted.
4. The project duration is completed.
5. The risk in the project is under acceptable limit.
Practically, we feel that the decision of stopping testing is based on the level of the risk
acceptable to the management. As testing is a never ending process we can never
assume that 100 % testing has been done, we can only minimize the risk of shipping
the product to client with X testing done. The risk can be measured by Risk analysis
but for small duration / low budget / low resources project, risk can be deduced by
simply:

Measuring Test Coverage.

Number of test cycles.

Number of high priority bugs.

9. Verification Strategies
What is Verification?
Verification is the process of evaluating a system or component to determine whether
the products of a given development phase satisfy the conditions imposed at the start of
that phase.1
What is the importance of the Verification Phase?
Verification process helps in detecting defects early, and preventing their leakage
downstream. Thus, the higher cost of later detection and rework is eliminated.

9.1 Review
A process or meeting during which a work product, or set of work products, is
presented to project personnel, managers, users, customers, or other interested parties
for comment or approval.

http://www.SofTReL.org

30 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

The main goal of reviews is to find defects. Reviews are a good compliment to testing to
help assure quality. A few purposes of SQA reviews can be as follows:

Assure the quality of deliverables before the project moves to the next stage.

Once a deliverable has been reviewed, revised as required, and approved, it can
be used as a basis for the next stage in the life cycle.

What are the various types of reviews?

Types of reviews include Management Reviews, Technical Reviews, Inspections,
Walkthroughs and Audits.
Management Reviews
Management reviews are performed by those directly responsible for the system in order
to monitor progress, determine status of plans and schedules, confirm requirements
and their system allocation.
Therefore the main objectives of Management Reviews can be categorized as follows:

Validate from a management perspective that the project is making progress

according to the project plan.

Ensure that deliverables are ready for management approvals.

Resolve issues that require managements attention.

Identify any project bottlenecks.

Keeping project in Control.

Support decisions made during such reviews include Corrective actions, Changes in the
allocation of resources or changes to the scope of the project
In management reviews the following Software products are reviewed:
Audit Reports
Contingency plans
Installation plans
Risk management plans
Software Q/A
The participants of the review play the roles of Decision-Maker, Review Leader,
Recorder, Management Staff, and Technical Staff.
Technical Reviews
Technical reviews confirm that product Conforms to specifications, adheres to
regulations, standards, guidelines, plans, changes are properly implemented, changes
affect only those system areas identified by the change specification.
http://www.SofTReL.org

31 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

The main objectives of Technical Reviews can be categorized as follows:

Ensure that the software confirms to the organization standards.

Ensure that any changes in the development procedures (design, coding, testing)
are implemented per the organization pre-defined standards.

In technical reviews, the following Software products are reviewed

Software requirements specification

Software design description

Software test documentation

Software user documentation

Installation procedure

Release notes

The participants of the review play the roles of Decision-maker, Review leader, Recorder,
Technical staff.
What is Requirement Review?
A process or meeting during which the requirements for a system, hardware item, or
software item are presented to project personnel, managers, users, customers, or other
interested parties for comment or approval. Types include system requirements review,
software requirements review.
Who is involved in Requirement Review?

Product management leads Requirement Review. Members from every affected

department participates in the review

Input Criteria
Software requirement specification is the essential document for the review. A checklist
can be used for the review.
Exit Criteria
Exit criteria include the filled & completed checklist with the reviewers comments &
suggestions and the re-verification whether they are incorporated in the documents.
What is Design Review?
A process or meeting during which a system, hardware, or software design is presented
to project personnel, managers, users, customers, or other interested parties for

http://www.SofTReL.org

32 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

comment or approval. Types include critical design review, preliminary design review,
and system design review.
Who involve in Design Review?

QA team member leads design review. Members from development team and QA
team participate in the review.

Input Criteria
Design document is the essential document for the review. A checklist can be used for
the review.
Exit Criteria
Exit criteria include the filled & completed checklist with the reviewers comments &
suggestions and the re-verification whether they are incorporated in the documents.

What is Code Review?

A meeting at which software code is presented to project personnel, managers, users,
customers, or other interested parties for comment or approval.
Who is involved in Code Review?

QA team member (In case the QA Team is only involved in Black Box Testing, then
the Development team lead chairs the review team) leads code review. Members
from development team and QA team participate in the review.

Input Criteria
The Coding Standards Document and the Source file are the essential documents for
the review. A checklist can be used for the review.
Exit Criteria
Exit criteria include the filled & completed checklist with the reviewers comments &
suggestions and the re-verification whether they are incorporated in the documents.

9.2 Walkthrough
A static analysis technique in which a designer or programmer leads members of the
development team and other interested parties through a segment of documentation or

http://www.SofTReL.org

33 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

code, and the participants ask questions and make comments about possible errors,
violation of development standards, and other problems.
The objectives of Walkthrough can be summarized as follows:

Detect errors early.

Ensure (re)established standards are followed:

Train and exchange technical information among project teams which participate in
the walkthrough.

Increase the quality of the project, thereby improving morale of the team members.

The participants in Walkthroughs assume one or more of the following roles:

a) Walk-through leader
b) Recorder
c) Author
d) Team member
To consider a review as a systematic walk-through, a team of at least two members
shall be assembled. Roles may be shared among the team members. The walk-through
leader or the author may serve as the recorder. The walk-through leader may be the
author.
Individuals holding management positions over any member of the walk-through team
shall not participate in the walk-through.
Input to the walk-through shall include the following:
a) A statement of objectives for the walk-through
b) The software product being examined
c) Standards that are in effect for the acquisition, supply, development, operation,
and/or maintenance of the software product
Input to the walk-through may also include the following:
d) Any regulations, standards, guidelines, plans, and procedures against which the
software product is to be inspected
e) Anomaly categories
The walk-through shall be considered complete when
a) The entire software product has been examined
b) Recommendations and required actions have been recorded
c) The walk-through output has been completed

http://www.SofTReL.org

34 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

9.3 Inspection
A static analysis technique that relies on visual examination of development products to
detect errors, violations of development standards, and other problems. Types include
code inspection; design inspection, Architectural inspections, Test ware inspections etc.
The participants in Inspections assume one or more of the following roles:
a) Inspection leader
b) Recorder
c) Reader
d) Author
e) Inspector
All participants in the review are inspectors. The author shall not act as inspection
leader and should not act as reader or recorder. Other roles may be shared among the
team members. Individual participants may act in more than one role.
Individuals holding management positions over any member of the inspection team
shall not participate in the inspection.
Input to the inspection shall include the following:
a) A statement of objectives for the inspection
b) The software product to be inspected
c) Documented inspection procedure
d) Inspection reporting forms
e) Current anomalies or issues list
Input to the inspection may also include the following:
f) Inspection checklists
g) Any regulations, standards, guidelines, plans, and procedures against which the
software product is to be inspected
h) Hardware product specifications
i) Hardware performance data
j) Anomaly categories
The individuals may make additional reference material available responsible for the
software product when requested by the inspection leader.
The purpose of the exit criteria is to bring an unambiguous closure to the inspection
meeting. The exit decision shall determine if the software product meets the inspection
exit criteria and shall prescribe any appropriate rework and verification. Specifically,
the inspection team shall identify the software product disposition as one of the
following:
http://www.SofTReL.org

35 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

a) Accept with no or minor rework. The software product is accepted as is or with only
minor rework. (For example, that would require no further verification).
b) Accept with rework verification. The software product is to be accepted after the
inspection leader or
a designated member of the inspection team (other than the author) verifies rework.
c) Re-inspect. Schedule a re-inspection to verify rework. At a minimum, a re-inspection
shall examine the software product areas changed to resolve anomalies identified in the
last inspection, as well as side effects of those changes.

10. Testing Types and Techniques

Testing types
Testing types refer to different approaches towards testing a computer program, system
or product. The two types of testing are black box testing and white box testing, which
would both be discussed in detail in this chapter. Another type, termed as gray
box testing or hybrid testing is evolving presently and it combines the features of the
two types.
Testing Techniques
Testing techniques refer to different methods of testing particular features a computer
program, system or product. Each testing type has its own testing techniques while
some techniques combine the feature of both types. Some techniques are

Error and anomaly detection technique

Interface checking

Physical units checking

Loop testing ( Discussed in detail in this chapter)

Basis Path testing/McCabes cyclomatic number( Discussed in detail in this

chapter)

Control structure testing( Discussed in detail in this chapter)

Error Guessing( Discussed in detail in this chapter)

Boundary Value analysis ( Discussed in detail in this chapter)

Graph based testing( Discussed in detail in this chapter)

Equivalence partitioning( Discussed in detail in this chapter)

Instrumentation based testing

Random testing

Domain testing

http://www.SofTReL.org

36 of 142

Software Testing Guide Book

Halsteads software science

And many more

Part I: Fundamentals of Software Testing

Some of these and many others would be discussed in the later sections of this chapter.

Difference between Testing Types and Testing Techniques

Testing types deal with what aspect of the computer software would be tested, while
testing techniques deal with how a specific part of the software would be tested.
That is, testing types mean whether we are testing the function or the structure of the
software. In other words, we may test each function of the software to see if it is
operational or we may test the internal components of the software to check if its
internal workings are according to specification.
On the other hand, Testing technique means what methods or ways would be applied
or calculations would be done to test a particular feature of a software (Sometimes we
test the interfaces, sometimes we test the segments, sometimes loops etc.)
How to Choose a Black Box or White Box Test?
White box testing is concerned only with testing the software product; it cannot
guarantee that the complete specification has been implemented. Black box testing is
concerned only with testing the specification; it cannot guarantee that all parts of the
implementation have been tested. Thus black box testing is testing against the
specification and will discover faults of omission, indicating that part of the
specification has not been fulfilled. White box testing is testing against the
implementation and will discover faults of commission, indicating that part of the
implementation is faulty. In order to completely test a software product both black and
white box testing are required.

White box testing is much more expensive (In terms of resources and time) than black
box testing. It requires the source code to be produced before the tests can be planned
and is much more laborious in the determination of suitable input data and the
determination if the software is or is not correct. It is advised to start test planning with
a black box testing approach as soon as the specification is available. White box tests
are to be planned as soon as the Low Level Design (LLD) is complete. The Low Level
Design will address all the algorithms and coding style. The paths should then be
http://www.SofTReL.org

37 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

checked against the black box test plan and any additional required test cases should
be

determined

and

applied.

The consequences of test failure at initiative/requirements stage are very expensive. A

failure of a test case may result in a change, which requires all black box testing to be
repeated and the re-determination of the white box paths. The cheaper option is to
regard the process of testing as one of quality assurance rather than quality control.
The intention is that sufficient quality is put into all previous design and production
stages so that it can be expected that testing will project the presence of very few faults,
rather than testing being relied upon to discover any faults in the software, as in case of
quality control. A combination of black box and white box test considerations is still not
a completely adequate test rationale.

10.1 White Box Testing

What is WBT?
White box testing involves looking at the structure of the code. When you know the
internal structure of a product, tests can be conducted to ensure that the internal
operations performed according to the specification. And all internal components have
been adequately exercised. In other word WBT tends to involve the coverage of the
specification in the code.
Code coverage is defined in six types as listed below.

Segment coverage Each segment of code b/w control structure is executed at

least once.

Branch Coverage or Node Testing Each branch in the code is taken in each
possible direction at least once.

Compound Condition Coverage When there are multiple conditions, you must
test not only each direction but also each possible combinations of conditions,
which is usually done by using a Truth Table

Basis Path Testing Each independent path through the code is taken in a predetermined order. This point will further be discussed in other section.

Data Flow Testing (DFT) In this approach you track the specific variables
through each possible calculation, thus defining the set of intermediate paths
through the code i.e., those based on each piece of code chosen to be tracked.

http://www.SofTReL.org

38 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Even though the paths are considered independent, dependencies across

multiple paths are not really tested for by this approach. DFT tends to reflect
dependencies but it is mainly through sequences of data manipulation. This
approach tends to uncover bugs like variables used but not initialize, or
declared but not used, and so on.

Path Testing Path testing is where all possible paths through the code are
defined and covered. This testing is extremely laborious and time consuming.

Loop Testing In addition top above measures, there are testing strategies based
on loop testing. These strategies relate to testing single loops, concatenated
loops, and nested loops. Loops are fairly simple to test unless dependencies exist
among the loop or b/w a loop and the code it contains.

What do we do in WBT?
In WBT, we use the control structure of the procedural design to derive test cases.
Using WBT methods a tester can derive the test cases that

Guarantee that all independent paths within a module have been exercised
at least once.

Exercise all logical decisions on their true and false values.

Execute all loops at their boundaries and within their operational bounds

Exercise internal data structures to ensure their validity.

White box testing (WBT) is also called Structural or Glass box testing.
Why WBT?
We do WBT because Black box testing is unlikely to uncover numerous sorts of
defects in the program. These defects can be of the following nature:

Logic errors and incorrect assumptions are inversely proportional to the

probability that a program path will be executed. Error tend to creep into our
work when we design and implement functions, conditions or controls that
are out of the program

The logical flow of the program is sometimes counterintuitive, meaning that

our unconscious assumptions about flow of control and data may lead to
design errors that are uncovered only when path testing starts.

http://www.SofTReL.org

39 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Typographical errors are random, some of which will be uncovered by syntax

checking mechanisms but others will go undetected until testing begins.

http://www.SofTReL.org

40 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Skills Required
Talking theoretically, all we need to do in WBT is to define all logical paths, develop
test cases to exercise them and evaluate results i.e. generate test cases to exercise
the program logic exhaustively.
For this we need to know the program well i.e. We should know the specification
and the code to be tested; related documents should be available too us .We must
be able to tell the expected status of the program versus the actual status found at
any point during the testing process.
Limitations
Unfortunately in WBT, exhaustive testing of a code presents certain logistical
problems. Even for small programs, the number of possible logical paths can be very
large. For instance, a 100 line C Language program that contains two nested loops
executing 1 to 20 times depending upon some initial input after some basic data
declaration. Inside the interior loop four if-then-else constructs are required. Then
there are approximately 1014 logical paths that are to be exercised to test the
program exhaustively. Which means that a magic test processor developing a single
test case, execute it and evaluate results in one millisecond would require 3170
years working continuously for this exhaustive testing which is certainly
impractical. Exhaustive WBT is impossible for large software systems. But that
doesnt mean WBT should be considered as impractical. Limited WBT in which a
limited no. of important logical paths are selected and exercised and important data
structures are probed for validity, is both practical and WBT. It is suggested that
white and black box testing techniques can be coupled to provide an approach that
that validates the software interface selectively ensuring the correction of internal
working of the software.
Tools used for White Box testing:
Few Test automation tool vendors offer white box testing tools which:
1) Provide run-time error and memory leak detection;
2) Record the exact amount of time the application spends in any given block of code for
the purpose of finding inefficient code bottlenecks; and
3) Pinpoint areas of the application that have and have not been executed.

http://www.SofTReL.org

41 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

10.1.1 Basis Path Testing

Basis path testing is a white box testing technique first proposed by Tom McCabe. The
Basis path method enables to derive a logical complexity measure of a procedural
design and use this measure as a guide for defining a basis set of execution paths. Test
Cases derived to exercise the basis set are guaranteed to execute every statement in the
program at least one time during testing.
10.1.2 Flow Graph Notation
The flow graph depicts logical control flow using a diagrammatic notation. Each
structured construct has a corresponding flow graph symbol.
10.1.3 Cyclomatic Complexity
Cyclomatic complexity is a software metric that provides a quantitative measure of the
logical complexity of a program. When used in the context of a basis path testing
method, the value computed for Cyclomatic complexity defines the number for
independent paths in the basis set of a program and provides us an upper bound for
the number of tests that must be conducted to ensure that all statements have been
executed at least once.
An independent path is any path through the program that introduces at least one new
set of processing statements or a new condition.

Computing Cyclomatic Complexity

Cyclomatic complexity has a foundation in graph theory and provides us with extremely
useful software metric. Complexity is computed in one of the three ways:
1. The number of regions of the flow graph corresponds to the Cyclomatic complexity.
2. Cyclomatic complexity, V(G), for a flow graph, G is defined as
V (G) = E-N+2
Where E, is the number of flow graph edges, N is the number of flow graph nodes.
3. Cyclomatic complexity, V (G) for a flow graph, G is also defined as:
V (G) = P+1
Where P is the number of predicate nodes contained in the flow graph G.
10.1.4 Graph Matrices
The procedure for deriving the flow graph and even determining a set of basis paths is
amenable to mechanization. To develop a software tool that assists in basis path
testing, a data structure, called a graph matrix can be quite useful.
http://www.SofTReL.org

42 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

A Graph Matrix is a square matrix whose size is equal to the number of nodes on the
flow graph. Each row and column corresponds to an identified node, and matrix entries
correspond to connections between nodes.
10.1.5 Control Structure Testing
Described below are some of the variations of Control Structure Testing.
Condition Testing
Condition testing is a test case design method that exercises the logical conditions
contained in a program module.
Data Flow Testing
The data flow testing method selects test paths of a program according to the
locations of definitions and uses of variables in the program.
10.1.6 Loop Testing
Loop Testing is a white box testing technique that focuses exclusively on the validity of
loop constructs. Four classes of loops can be defined: Simple loops, Concatenated
loops, nested loops, and unstructured loops.
Simple Loops
The following sets of tests can be applied to simple loops, where n is the maximum
number of allowable passes through the loop.
1. Skip the loop entirely.
2. Only one pass through the loop.
3. Two passes through the loop.
4. m passes through the loop where m<n.
5. n-1, n, n+1 passes through the loop.
Nested Loops
If we extend the test approach from simple loops to nested loops, the number of
possible tests would grow geometrically as the level of nesting increases.
1. Start at the innermost loop. Set all other loops to minimum values.
2. Conduct simple loop tests for the innermost loop while holding the outer
loops at their minimum iteration parameter values. Add other tests for out-ofrange or exclude values.
3. Work outward, conducting tests for the next loop, but keep all other outer loops
at minimum values and other nested loops to typical values.
4. Continue until all loops have been tested.
http://www.SofTReL.org

43 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Concatenated Loops
Concatenated loops can be tested using the approach defined for simple loops, if
each of the loops is independent of the other. However, if two loops are concatenated
and the loop counter for loop 1 is used as the initial value for loop 2, then the loops
are not independent.
Unstructured Loops
Whenever possible, this class of loops should be redesigned to reflect the use of the
structured programming constructs.

10.2 Black Box Testing

Black box is a test design method. Black box testing treats the system as a "black-box",
so it doesn't explicitly use Knowledge of the internal structure. Or in other words the
Test engineer need not know the internal working of the Black box.
It focuses on the functionality part of the module.
Some people like to call black box testing as behavioral, functional, opaque-box, and
closed-box. While the term black box is most popularly use, many people prefer the
terms "behavioral" and "structural" for black box and white box respectively. Behavioral
test design is slightly different from black-box test design because the use of internal
knowledge isn't strictly forbidden, but it's still discouraged.
Personally we feel that there is a trade off between the approaches used to test a
product using white box and black box types.
There are some bugs that cannot be found using only black box or only white box. If the
test cases are extensive and the test inputs are also from a large sample space then it is
always possible to find majority of the bugs through black box testing.
Tools used for Black Box testing:
Many tool vendors have been producing tools for automated black box and automated
white box testing for several years. The basic functional or regression testing tools
capture the results of black box tests in a script format. Once captured, these scripts
can be executed against future builds of an application to verify that new functionality
hasn't disabled previous functionality.
Advantages of Black Box Testing
- Tester can be non-technical.
- This testing is most likely to find those bugs as the user would find.
http://www.SofTReL.org

44 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

- Testing helps to identify the vagueness and contradiction in functional specifications.

- Test cases can be designed as soon as the functional specifications are complete
Disadvantages of Black Box Testing
- Chances of having repetition of tests that are already done by programmer.
- The test inputs needs to be from large sample space.
- It is difficult to identify all possible inputs in limited testing time. So writing test cases
is slow and difficult
Chances of having unidentified paths during this testing
10.2.1 Graph Based Testing Methods
Software testing begins by creating a graph of important objects and their relationships
and then devising a series of tests that will cover the graph so that each objects and
their relationships and then devising a series of tests that will cover the graph so that
each object and relationship is exercised and error is uncovered.
10.2.2 Error Guessing
Error Guessing comes with experience with the technology and the project. Error
Guessing is the art of guessing where errors can be hidden. There are no specific tools
and techniques for this, but you can write test cases depending on the situation: Either
when reading the functional documents or when you are testing and find an error that
you have not documented.
10.2.3 Boundary Value Analysis
Boundary Value Analysis (BVA) is a test data selection technique (Functional
Testing technique) where the extreme values are chosen. Boundary values
include maximum, minimum, just inside/outside boundaries, typical values,
and error values. The hope is that, if a system works correctly for these special
values then it will work correctly for all values in between.

Extends equivalence partitioning

Test both sides of each boundary

Look at output boundaries for test cases too

Test min, min-1, max, max+1, typical values

BVA focuses on the boundary of the input space to identify test cases

Rational is that errors tend to occur near the extreme values of an input
variable

http://www.SofTReL.org

45 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

There are two ways to generalize the BVA techniques:

1. By the number of variables
o

For n variables: BVA yields 4n + 1 test cases.

2. By the kinds of ranges

o

Generalizing ranges depends on the nature or type of variables

NextDate has a variable Month and the range could be

defined as {Jan, Feb, Dec}

Min = Jan, Min +1 = Feb, etc.

Triangle had a declared range of {1, 20,000}

Boolean variables have extreme values True and False but

there is no clear choice for the remaining three values

Advantages of Boundary Value Analysis

1. Robustness Testing - Boundary Value Analysis plus values that go beyond
the limits
2. Min - 1, Min, Min +1, Nom, Max -1, Max, Max +1
3. Forces attention to exception handling
4. For strongly typed languages robust testing results in run-time errors that
abort normal execution
Limitations of Boundary Value Analysis
BVA works best when the program is a function of several independent variables that
represent bounded physical quantities
1. Independent Variables
o

NextDate test cases derived from BVA would be inadequate: focusing

on the boundary would not leave emphasis on February or leap years

Dependencies exist with NextDate's Day, Month and Year

Test cases derived without consideration of the function

2. Physical Quantities
o

An example of physical variables being tested, telephone numbers what faults might be revealed by numbers of 000-0000, 000-0001,
555-5555, 999-9998, 999-9999?

10.2.4 Equivalence Partitioning

Equivalence partitioning is a black box testing method that divides the input domain of
a program into classes of data from which test cases can be derived.
http://www.SofTReL.org

46 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

EP can be defined according to the following guidelines:

1. If an input condition specifies a range, one valid and one two invalid classes are
defined.
2. If an input condition requires a specific value, one valid and two invalid equivalence
classes are defined.
3. If an input condition specifies a member of a set, one valid and one invalid
equivalence class is defined.
4. If an input condition is Boolean, one valid and one invalid class is defined.
10.2.5 Comparison Testing
There are situations where independent versions of software be developed for critical
applications, even when only a single version will be used in the delivered computer
based system. It is these independent versions which form the basis of a black box
testing technique called Comparison testing or back-to-back testing.
10.2.6 Orthogonal Array Testing
The Orthogonal Array Testing Strategy (OATS) is a systematic, statistical way of testing
pair-wise interactions by deriving a suitable small set of test cases (from a large number
of possibilities).

11. Designing Test Cases

There are various techniques in which you can design test cases. For example, the
below illustrated gives you an overview as to how you derive test cases using the basis
path method:
The basis path testing method can be applied to a procedural design or to source code.
The following steps can be applied to derive the basis set:
1. Use the design or code as a foundation, draw corresponding flow graph.
2. Determine the Cyclomatic complexity of the resultant flow graph.
3. Determine a basis set of linearly independent paths.
4. Prepare test cases that will fore execution of each path in the basis set.
Let us now see how to design test cases in a generic manner:
1. Understand the requirements document.
2. Break the requirements into smaller requirements (if it improves your testability).

http://www.SofTReL.org

47 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

3. For each Requirement, decide what technique you should use to derive the test
cases. For example, if you are testing a Login page, you need to write test cases
basing on error guessing and also negative cases for handling failures.
4. Have a Traceability Matrix as follows:
Requirement No (In RD)

Requirement

Test Case No

What this Traceability Matrix provides you is the coverage of Testing. Keep filling
in the Traceability matrix when you complete writing test cases for each
requirement.

12. Validation Phase

The Validation Phase falls into picture after the software is ready or when the code is
being written. There are various techniques and testing types that can be appropriately
used while performing the testing activities. Let us examine a few of them.

12.1 Unit Testing

This is a typical scenario of Manual Unit Testing activityA Unit is allocated to a Programmer for programming. Programmer has to use
Functional Specifications document as input for his work.
Programmer prepares Program Specifications for his Unit from the Functional
Specifications. Program Specifications describe the programming approach, coding tips
for the Units coding.
Using these Program specifications as input, Programmer prepares Unit Test Cases
document for that particular Unit. A Unit Test Cases Checklist may be used to check
the completeness of Unit Test Cases document.
Program Specifications and Unit Test Cases are reviewed and approved by Quality
Assurance Analyst or by peer programmer.
The programmer implements some functionality for the system to be developed. The
same is tested by referring the unit test cases. While testing that functionality if any
defects have been found, they are recorded using the defect logging tool whichever is
applicable. The programmer fixes the bugs found and tests the same for any errors.
Stubs and Drivers
A software application is made up of a number of Units, where output of one Unit
goes as an Input of another Unit. e.g. A Sales Order Printing program takes a Sales
Order as an input, which is actually an output of Sales Order Creation program.

http://www.SofTReL.org

48 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Due to such interfaces, independent testing of a Unit becomes impossible. But that is
what we want to do; we want to test a Unit in isolation! So here we use Stub and
Driver.
A Driver is a piece of software that drives (invokes) the Unit being tested. A driver
creates necessary Inputs required for the Unit and then invokes the Unit.
A Unit may reference another Unit in its logic. A Stub takes place of such subordinate
unit during the Unit Testing. A Stub is a piece of software that works similar to a unit
which is referenced by the Unit being tested, but it is much simpler that the actual
unit. A Stub works as a Stand-in for the subordinate unit and provides the minimum
required behavior for that unit.
Programmer needs to create such Drivers and Stubs for carrying out Unit Testing.
Both the Driver and the Stub are kept at a minimum level of complexity, so that they do
not induce any errors while testing the Unit in question.
Example - For Unit Testing of Sales Order Printing program, a Driver program will
have the code which will create Sales Order records using hardcoded data and then call
Sales Order Printing program. Suppose this printing program uses another unit which
calculates Sales discounts by some complex calculations. Then call to this unit will be
replaced by a Stub, which will simply return fix discount data.
Unit Test Cases
It must be clear by now that preparing Unit Test Cases document (referred to as UTC
hereafter) is an important task in Unit Testing activity. Having an UTC, which is
complete with every possible test case, leads to complete Unit Testing and thus gives an
assurance of defect-free Unit at the end of Unit Testing stage. So let us discuss about
how to prepare a UTC.
Think of following aspects while preparing Unit Test Cases
Expected Functionality: Write test cases against each functionality that is expected
to be provided from the Unit being developed.
e.g. If an SQL script contains commands for creating one table and altering another
table then test cases should be written for testing creation of one table and
alteration of another.
It is important that User Requirements should be traceable to Functional
Specifications, Functional Specifications be traceable to Program Specifications and
Program Specifications be traceable to Unit Test Cases. Maintaining such
traceability ensures that the application fulfills User Requirements.
Input values:

http://www.SofTReL.org

49 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Every input value: Write test cases for each of the inputs accepted by the
Unit.
e.g. If a Data Entry Form has 10 fields on it, write test cases for all 10 fields.

Validation of input: Every input has certain validation rule associated with
it. Write test cases to validate this rule. Also, there can be cross-field
validations in which one field is enabled depending upon input of another
field. Test cases for these should not be missed.
e.g. A combo box or list box has a valid set of values associated with it.
A numeric field may accept only positive values.
An email address field must have ampersand (@) and period (.) in it.
A Sales tax code entered by user must belong to the State specified by
the user.

Boundary conditions: Inputs often have minimum and maximum possible

values. Do not forget to write test cases for them.
e.g. A field that accepts percentage on a Data Entry Form should be able to
accept inputs only from 1 to 100.

Limitations of data types: Variables that hold the data have their value limits
depending upon their data types. In case of computed fields, it is very
important to write cases to arrive at an upper limit value of the variables.

Computations: If any calculations are involved in the processing, write test

cases to check the arithmetic expressions with all possible combinations of
values.

Output values: Write test cases to generate scenarios, which will produce all types
of output values that are expected from the Unit.
e.g. A Report can display one set of data if user chooses a particular option and
another set of data if user chooses a different option. Write test cases to check each
of these outputs. When the output is a result of some calculations being performed
or some formulae being used, then approximations play a major role and must be
checked.
Screen / Report Layout: Screen Layout or web page layout and Report layout must
be tested against the requirements. It should not happen that the screen or the
report looks beautiful and perfect, but user wanted something entirely different! It
should ensure that pages and screens are consistent.
Path coverage: A Unit may have conditional processing which results in various
paths the control can traverse through. Test case must be written for each of these
paths.

http://www.SofTReL.org

50 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Assumptions: A Unit may assume certain things for it to function. For example, a
Unit may need a database to be open. Then test case must be written to check that
the Unit reports error if such assumptions are not met.
Transactions: In case of database applications, it is important to make sure that
transactions are properly designed and no way inconsistent data gets saved in the
database.
Abnormal terminations: Behavior of the Unit in case of abnormal termination
should be tested.
Error messages: Error messages should be short, precise and self-explanatory. They
should be properly phrased and should be free of grammatical mistakes.
UTC Document
Given below is a simple format for UTC document.
Test Case No.
ID which can be
referred to in
other
documents like
Traceability
Matrix,
Root
Cause Analysis
of Defects etc.

Test
Case
purpose
What to test

Procedure
How to test

Expected
Result
What
should
happen

Actual result
What actually
happened?
This
column
can be omitted
when
Defect
Recording Tool
is used.

Note that as this is a sample, we have not provided columns for Pass/Fail and Remarks.
Example:
Let us say we want to write UTC for a Data Entry Form below:

Item No.
Item No.
Item Name
Item
Item
No.Price
Item No...
Item No.

Item Master Form

Given below are some of the Unit Test Cases for the above Form:
Test
Test
Case Procedure
Expected Result
Case
purpose
No.
http://www.SofTReL.org

Actual
result

51 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Item no. to
start by A or
B.

1.Create a new record.

2.Type
Item
no.
starting with A.
3.Type
item
no.
starting with B.
4.Type
item
no.
starting
with
any
character other than
A and B.

2.

Item Price to
be
between
1000 to 2000 if
Item no. starts
with A.

1.Create a new record

with Item no. starting
with A.
2.Specify price < 1000
3.Specify price >2000.
4.Specify price = 1000.
5.Specify price = 2000.
6.Specify price between
1000 and 2000.

2,3.
Should
get
accepted and control
should move to next
field.
4. Should not get
accepted. An error
message should be
displayed and control
should remain in Item
no. field.
2,3.Error should get
displayed and control
should remain in Price
field.
4,5,6.Should
get
accepted and control
should move to next
field.

UTC Checklist
UTC checklist may be used while reviewing the UTC prepared by the programmer. As
any other checklist, it contains a list of questions, which can be answered as either a
Yes or a No. The Aspects list given in Section 4.3 above can be referred to while
preparing UTC checklist.
e.g. Given below are some of the checkpoints in UTC checklist
1. Are test cases present for all form field validations?
2. Are boundary conditions considered?
3. Are Error messages properly phrased?

Defect Recording
Defect Recording can be done on the same document of UTC, in the column of
Expected Results. This column can be duplicated for the next iterations of Unit
Testing.
Defect Recording can also be done using some tools like Bugzilla, in which defects are
stored in the database.
Defect Recording needs to be done with care. It should be able to indicate the problem
in clear, unambiguous manner, and reproducing of the defects should be easily possible
from the defect information.
Conclusion

http://www.SofTReL.org

52 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Exhaustive Unit Testing filters out the defects at an early stage in the Development Life
Cycle. It proves to be cost effective and improves Quality of the Software before the
smaller pieces are put together to form an application as a whole. Unit Testing should
be done sincerely and meticulously, the efforts are paid well in the long run.

12.2 Integration Testing

Integration testing is a systematic technique for constructing the program structure
while at the same time conducting tests to uncover errors associated with interfacing.
The objective is to take unit tested components and build a program structure that has
been dictated by design.
Usually, the following methods of Integration testing are followed:
1. Top-down Integration approach.
2. Bottom-up Integration approach.
12.2.1 Top-Down Integration
Top-down integration testing is an incremental approach to construction of program
structure. Modules are integrated by moving downward through the control hierarchy,
beginning with the main control module. Modules subordinate to the main control
module are incorporated into the structure in either a depth-first or breadth-first
manner.
1. The Integration process is performed in a series of five steps:
2. The main control module is used as a test driver and stubs are substituted for
all components directly subordinate to the main control module.
3. Depending on the integration approach selected subordinate stubs are replaced
one at a time with actual components.
4. Tests are conducted as each component is integrated.
5. On completion of each set of tests, stub is replaced with the real component.
6. Regression testing may be conducted to ensure that new errors have not been
introduced.
12.2.2 Bottom-Up Integration
Bottom-up integration testing begins construction and testing with atomic modules (i.e.
components at the lowest levels in the program structure). Because components are
integrated from the bottom up, processing required for components subordinate to a
given level is always available and the need for stubs is eliminated.
1. A Bottom-up integration strategy may be implemented with the following steps:
http://www.SofTReL.org

53 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

2. Low level components are combined into clusters that perform a specific
software sub function.
3. A driver is written to coordinate test case input and output.
4. The cluster is tested.
Drivers are removed and clusters are combined moving upward in the program
structure.

12.3 System Testing

System testing concentrates on testing the complete system with a variety of techniques
and methods. System Testing comes into picture after the Unit and Integration Tests.
12.3.1 Compatibility Testing
Compatibility Testing concentrates on testing whether the given application goes well
with third party tools, software or hardware platform.
For example, you have developed a web application. The major compatibility issue is,
the web site should work well in various browsers. Similarly when you develop
applications on one platform, you need to check if the application works on other
operating systems as well. This is the main goal of Compatibility Testing.
Before you begin compatibility tests, our sincere suggestion is that you should have a
cross reference matrix between various softwares, hardware based on the application
requirements. For example, let us suppose you are testing a web application. A sample
list can be as follows:
Hardware
Pentium II, 128 MB RAM
Pentium III, 256 MB RAM
Pentium IV, 512 MB RAM

Software
IE 4.x, Opera, Netscape
IE 5.x, Netscape
Mozilla

Operating System
Windows 95
Windows XP
Linux

Compatibility tests are also performed for various client/server based applications
where the hardware changes from client to client.
Compatibility Testing is very crucial to organizations developing their own products.
The products have to be checked for compliance with the competitors of the third party
tools, hardware, or software platform. E.g. A Call center product has been built for a
solution with X product but there is a client interested in using it with Y product; then
the issue of compatibility arises. It is of importance that the product is compatible with
varying platforms. Within the same platform, the organization has to be watchful that
with each new release the product has to be tested for compatibility.
A good way to keep up with this would be to have a few resources assigned along with
their routine tasks to keep updated about such compatibility issues and plan for testing
when and if the need arises.
http://www.SofTReL.org

54 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

By the above example it is not intended that companies which are not developing
products do not have to cater for this type of testing. There case is equally existent, if an
application uses standard software then would it be able to run successfully with the
newer versions too? Or if a website is running on IE or Netscape, what will happen
when it is opened through Opera or Mozilla. Here again it is best to keep these issues in
mind and plan for compatibility testing in parallel to avoid any catastrophic failures and
delays.
12.3.2 Recovery Testing
Recovery testing is a system test that focuses the software to fall in a variety of ways
and verifies that recovery is properly performed. If it is automatic recovery then reinitialization, check pointing mechanisms, data recovery and restart should be
evaluated for correctness. If recovery requires human intervention, the mean-time-torepair (MTTR) is evaluated to determine whether it is within acceptable limits.
12.3.3 Usability Testing
Usability is the degree to which a user can easily learn and use a product to achieve a
goal. Usability testing is the system testing which attempts to find any human-factor
problems. A simpler description is testing the software from a users point of view.
Essentially it means testing software to prove/ensure that it is user-friendly, as distinct
from testing the functionality of the software. In practical terms it includes ergonomic
considerations, screen design, standardization etc.
The idea behind usability testing is to have actual users perform the tasks for which the
product was designed. If they can't do the tasks or if they have difficulty performing the
tasks, the UI is not adequate and should be redesigned. It should be remembered that
usability testing is just one of the many techniques that serve as a basis for evaluating
the UI in a user-centered approach. Other techniques for evaluating a UI include
inspection methods such as heuristic evaluations, expert reviews, card-sorting,
matching test or Icon intuitiveness evaluation, cognitive walkthroughs. Confusion
regarding usage of the term can be avoided if we use usability evaluation for the
generic term and reserve usability testing for the specific evaluation method based on
user

performance.

Heuristic

Evaluation

and

Usability

Inspection

or

cognitive

walkthrough does not involve real users.

It often involves building prototypes of parts of the user interface, having representative
users perform representative tasks and seeing if the appropriate users can perform the
tasks. In other techniques such as the inspection methods, it is not performance, but
http://www.SofTReL.org

55 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

someone's opinion of how users might perform that is offered as evidence that the UI is
acceptable or not. This distinction between performance and opinion about performance
is crucial. Opinions are subjective. Whether a sample of users can accomplish what
they want or not is objective. Under many circumstances it is more useful to find out if
users can do what they want to do rather than asking someone.
PERFORMING

THE TEST

1. Get a person who fits the user profile. Make sure that you are not getting
someone who has worked on it.

2. Sit them down in front of a computer, give them the application, and tell them a
small scenario, like: Thank you for volunteering making it easier for users to
find what they are looking for. We would like you to answer several questions.
There is no right or wrong answers. What we want to learn is why you make the
choices you do, what is confusing, why choose one thing and not another, etc.
Just talk us through your search and let us know what you are thinking. We
have a recorder which is going to capture what you say, so you will have to tell
us what you are clicking on as you also tell us what you are thinking. Also think
aloud when you are stuck somewhere
3. Now dont speak anything. Sounds easy, but see if you actually can shut up.
4. Watch them use the application. If they ask you something, tell them you're not
there. Then shut up again.
5. Start noting all the things you will have to change.
6. Afterwards ask them what they thought and note them down.
7. Once the whole thing is done thank the volunteer.

TOOLS AVAILABLE FOR

USABILITY TESTING

ErgoLight Usability Software offers comprehensive GUI quality solutions

for

the professional Windows application developer. ErgoLight offers solutions for

developers of Windows applications for testing and evaluating their usability.

WebMetrics Tool Suite from National Institute of Standards and Technology

contains rapid, remote, and automated tools to help in producing usable web
sites. The Web Static Analyzer Tool (WebSAT) checks the html of a web page
against numerous usability guidelines. The output from WebSAT consists of
identification of potential usability problems, which should be investigated
further through user testing. The Web Category Analysis Tool (WebCAT) lets the
usability engineer quickly construct and conduct a simple category analysis
across the web.

http://www.SofTReL.org

56 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Bobby from Center for Applied Special Technology is a web-based public

service offered by CAST that analyzes web pages for their accessibility to people
with disabilities as well as their compatibility with various browsers.

DRUM from Serco Usability Services is a tool, which has been developed by
close cooperation between Human Factors professionals and software engineers
to provide a broad range of support for video-assisted observational studies.

Form Testing Suite from Corporate Research and Advanced Development,

Digital Equipment Corporation Provides a test suite developed to test various
web browsers. The test results section provides a description of the tests.

USABILITY LABS

The Usability Center (ULAB) is a full service organization, which provides a

"Street-Wise" approach to usability risk management and product usability
excellence. It has custom designed ULAB facilities.

Usability Sciences Corporation has a usability lab in Dallas consisting of two

large offices separated by a one way mirror. The test room in each lab is
equipped with multiple video cameras, audio equipment, as well as everything a
user needs to operate the program. The video control and observation room
features five monitors, a video recorder with special effects switching, two-way
audio system, remote camera controls, a PC for test log purposes, and a
telephone for use as a help desk.

UserWorks, Inc. (formerly Man-Made Systems) is a consulting firm in the

Washington, DC area specializing in the design of user-product interfaces.
UserWorks does analyses, market research, user interface design, rapid
prototyping, product usability evaluations, competitive testing and analyses,
ergonomic analyses, and human factors contract research. UserWorks offers
several portable usability labs (audio-video data collection systems) for sale or
rent and an observational data logging software product for sale.

Lodestone Research has usability-testing laboratory with state of the art audio
and visual recording and testing equipment. All equipment has been designed to
be portable so that it can be taken on the road. The lab consists of a test room
and an observation/control room that can seat as many as ten observers. A-V
equipment includes two (soon to be 3) fully controllable SVHS cameras,
capture/feed capabilities for test participant's PC via scan converter and direct
split signal (to VGA "slave" monitors in observation room), up to eight video
monitors and four VCA monitors for observer viewing, mixing/editing

http://www.SofTReL.org

57 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

equipment, and "wiretap" capabilities to monitor and record both sides of

telephone conversation (e.g., if participant calls customer support).

Online Computer Library Center, Inc provides insight into the usability test
laboratory. It gives an overview of the infrastructure as well as the process being
used in the laboratory.

END

GOALS OF

USABILITY TESTING

To summarize the goals, it can be said that it makes the software more user friendly.
The end result will be:

Better quality software.

Software is easier to use.

Software is more readily accepted by users.

Shortens the learning curve for new users.

12.3.4 Security Testing

Security testing attempts to verify that protection mechanisms built into a system will,
in fact, protect it from improper penetration. During Security testing, password
cracking, unauthorized entry into the software, network security are all taken into
consideration.

12.3.5 Stress Testing

Stress testing executes a system in a manner that demands resources in abnormal
quantity, frequency, or volume. The following types of tests may be conducted during
stress testing;

Special tests may be designed that generate ten interrupts per second, when
one or two is the average rate.

Input data rates may be increases by an order of magnitude to determine

how input functions will respond.

Test Cases that require maximum memory or other resources.

Test Cases that may cause excessive hunting for disk-resident data.

Test Cases that my cause thrashing in a virtual operating system.

12.3.6 Performance Testing

Performance testing of a Web site is basically the process of understanding how the
Web application and its operating environment respond at various user load levels. In
http://www.SofTReL.org

58 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

general, we want to measure the Response Time, Throughput, and Utilization of the
Web site while simulating attempts by virtual users to simultaneously access the site.
One of the main objectives of performance testing is to maintain a Web site with low
response time, high throughput, and low utilization.
Response Time
Response Time is the delay experienced when a request is made to the server and the
server's response to the client is received. It is usually measured in units of time, such
as seconds or milliseconds. Generally speaking, Response Time increases as the inverse
of unutilized capacity. It increases slowly at low levels of user load, but increases
rapidly as capacity is utilized. Figure 1 demonstrates such typical characteristics of
Response Time versus user load.

Figure1. Typical characteristics of latency versus user load

The sudden increase in response time is often caused by the maximum utilization of
one or more system resources. For example, most Web servers can be configured to
start up a fixed number of threads to handle concurrent user requests. If the number of
concurrent requests is greater than the number of threads available, any incoming
requests will be placed in a queue and will wait for their turn to be processed. Any time
spent in a queue naturally adds extra wait time to the overall Response Time.
To better understand what Response Time means in a typical Web farm, we can divide
response time into many segments and categorize these segments into two major types:
network response time and application response time. Network response time refers to
the time it takes for data to travel from one server to another. Application response time
is the time required for data to be processed within a server. Figure 2 shows the
different response time in the entire process of a typical Web request.

http://www.SofTReL.org

59 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Figure 2 shows the different response time in the entire process of a typical Web
request.
Total Response Time = (N1 + N2 + N3 + N4) + (A1 + A2 + A3)
Where Nx represents the network Response Time and Ax represents the application
Response Time.
In general, the Response Time is mainly constrained by N1 and N4. This Response Time
represents the method your clients are using to access the Internet. In the most
common scenario, e-commerce clients access the Internet using relatively slow dial-up
connections. Once Internet access is achieved, a client's request will spend an
indeterminate amount of time in the Internet cloud shown in Figure 2 as requests and
responses are funneled from router to router across the Internet.
To reduce these networks Response Time (N1 and N4), one common solution is to move
the servers and/or Web contents closer to the clients. This can be achieved by hosting
your farm of servers or replicating your Web contents with major Internet hosting
providers who have redundant high-speed connections to major public and private
Internet exchange points, thus reducing the number of network routing hops between
the clients and the servers.
Network Response Times N2 and N3 usually depend on the performance of the
switching equipment in the server farm. When traffic to the back-end database grows,
consider upgrading the switches and network adapters to boost performance.
Reducing application Response Times (A1, A2, and A3) is an art form unto itself
because the complexity of server applications can make analyzing performance data
and performance tuning quite challenging. Typically, multiple software components
interact on the server to service a given request. Response time can be introduced by
any of the components. That said, there are ways you can approach the problem:

First, your application design should minimize round trips wherever possible.
Multiple round trips (client to server or application to database) multiply
transmission and resource acquisition Response time. Use a single round trip
wherever possible.

http://www.SofTReL.org

60 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

You can optimize many server components to improve performance for your
configuration. Database tuning is one of the most important areas on which to
focus. Optimize stored procedures and indexes.

Look for contention among threads or components competing for common

resources. There are several methods you can use to identify contention
bottlenecks. Depending on the specific problem, eliminating a resource contention
bottleneck may involve restructuring your code, applying service packs, or
upgrading components on your server. Not all resource contention problems can be
completely eliminated, but you should strive to reduce them wherever possible.
They can become bottlenecks for the entire system.

Finally, to increase capacity, you may want to upgrade the server hardware (scaling
up), if system resources such as CPU or memory are stretched out and have become
the bottleneck. Using multiple servers as a cluster (scaling out) may help to lessen
the load on an individual server, thus improving system performance and reducing
application latencies.

Throughput
Throughput refers to the number of client requests processed within a certain unit of
time. Typically, the unit of measurement is requests per second or pages per second.
From a marketing perspective, throughput may also be measured in terms of visitors
per day or page views per day, although smaller time units are more useful for
performance testing because applications typically see peak loads of several times the
average load in a day.
As one of the most useful metrics, the throughput of a Web site is often measured and
analyzed at different stages of the design, develop, and deploy cycle. For example, in the
process of capacity planning, throughput is one of the key parameters for determining
the hardware and system requirements of a Web site. Throughput also plays an
important role in identifying performance bottlenecks and improving application and
system performance. Whether a Web farm uses a single server or multiple servers,
throughput statistics show similar characteristics in reactions to various user load
levels. Figure 3 demonstrates such typical characteristics of throughput versus user
load.

http://www.SofTReL.org

61 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Figure 3. Typical characteristics of throughput versus user load

As Figure 3 illustrates, the throughput of a typical Web site increases proportionally at
the initial stages of increasing load. However, due to limited system resources,
throughput cannot be increased indefinitely. It will eventually reach a peak, and the
overall performance of the site will start degrading with increased load. Maximum
throughput, illustrated by the peak of the graph in Figure 3, is the maximum number of
user requests that can be supported concurrently by the site in the given unit of time.
Note that it is sometimes confusing to compare the throughput metrics for your Web
site to the published metrics of other sites. The value of maximum throughput varies
from site to site. It mainly depends on the complexity of the application. For example, a
Web site consisting largely of static HTML pages may be able to serve many more
requests per second than a site serving dynamic pages. As with any statistic,
throughput metrics can be manipulated by selectively ignoring some of the data. For
example, in your measurements, you may have included separate data for all the
supporting files on a page, such as graphic files. Another site's published
measurements might consider the overall page as one unit. As a result, throughput
values are most useful for comparisons within the same site, using a common
measuring methodology and set of metrics.
In many ways, throughput and Response time are related, as different approaches to
thinking about the same problem. In general, sites with high latency will have low
throughput. If you want to improve your throughput, you should analyze the same
criteria as you would to reduce latency. Also, measurement of throughput without
consideration of latency is misleading because latency often rises under load before
throughput peaks. This means that peak throughput may occur at a latency that is
unacceptable from an application usability standpoint. This suggests that Performance
reports include a cut-off value for Response time, such as:250 requests/second @ 5
seconds maximum Response time

http://www.SofTReL.org

62 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Utilization
Utilization refers to the usage level of different system resources, such as the server's
CPU(s), memory, network bandwidth, and so forth. It is usually measured as a
percentage of the maximum available level of the specific resource. Utilization versus
user load for a Web server typically produces a curve, as shown in Figure 4.

Figure 4. Typical characteristics of utilization versus user load

As Figure 4 illustrates, utilization usually increases proportionally to increasing user
load. However, it will top off and remain at a constant when the load continues to build
up.
If the specific system resource tops off at 100-percent utilization, it's very likely that
this resource has become the performance bottleneck of the site. Upgrading the
resource with higher capacity would allow greater throughput and lower latencythus
better performance. If the measured resource does not top off close to 100-percent
utilization, it is probably because one or more of the other system resources have
already reached their maximum usage levels. They have become the performance
bottleneck of the site.
To locate the bottleneck, you may need to go through a long and painstaking process of
running performance tests against each of the suspected resources, and then verifying
if performance is improved by increasing the capacity of the resource. In many cases,
performance of the site will start deteriorating to an unacceptable level well before the
major system resources, such as CPU and memory, are maximized. For example, Figure
5 illustrates a case where response time rises sharply to 45 seconds when CPU
utilization has reached only 60 percent.

http://www.SofTReL.org

63 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Figure 5. An example of Response Time versus utilization

As Figure 5 demonstrates, monitoring the CPU or memory utilization alone may not
always indicate the true capacity level of the server farm with acceptable performance.
Applications
While most traditional applications are designed to respond to a single user at any time,
most Web applications are expected to support a wide range of concurrent users, from a
dozen to a couple thousand or more. As a result, performance testing has become a
critical component in the process of deploying a Web application. It has proven to be
most useful in (but not limited to) the following areas:

Capacity planning

Bug fixing

Capacity Planning
How do you know if your server configuration is sufficient to support two million
visitors per day with average response time of less than five seconds? If your company
is projecting a business growth of 200 percent over the next two months, how do you
know if you need to upgrade your server or add more servers to the Web farm? Can
your server and application support a six-fold traffic increase during the Christmas
shopping season?
Capacity planning is about being prepared. You need to set the hardware and software
requirements of your application so that you'll have sufficient capacity to meet
anticipated and unanticipated user load.
One approach in capacity planning is to load-test your application in a testing (staging)
server farm. By simulating different load levels on the farm using a Web application
performance testing tool such as WAS, you can collect and analyze the test results to
better understand the performance characteristics of the application. Performance
charts such as those shown in Figures 1, 3, and 4 can then be generated to show the
expected Response Time, throughput, and utilization at these load levels.
http://www.SofTReL.org

64 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

In addition, you may also want to test the scalability of your application with different
hardware configurations. For example, load testing your application on servers with
one, two, and four CPUs respectively would help to determine how well the application
scales with symmetric multiprocessor (SMP) servers. Likewise, you should load test
your application with different numbers of clustered servers to confirm that your
application scales well in a cluster environment.
Although performance testing is as important as functional testing, its often overlooked
.Since the requirements to ensure the performance of the system is not as
straightforward as the functionalities of the system, achieving it correctly is more
difficult.
The effort of performance testing is addressed in two ways:

Load testing

Stress testing

Load testing
Load testing is a much used industry term for the effort of performance testing. Here
load means the number of users or the traffic for the system. Load testing is defined as
the testing to determine whether the system is capable of handling anticipated number
of users or not.
In Load Testing, the virtual users are simulated to exhibit the real user behavior as
much as possible. Even the user think time such as how users will take time to think
before inputting data will also be emulated. It is carried out to justify whether the
system is performing well for the specified limit of load.
For example, Let us say an online-shopping application is anticipating 1000 concurrent
user hits at peak period. In addition, the peak period is expected to stay for 12 hrs.
Then the system is load tested with 1000 virtual users for 12 hrs. These kinds of tests
are carried out in levels: first 1 user, 50 users, and 100 users, 250 users, 500 users
and so on till the anticipated limit are reached. The testing effort is closed exactly for
1000 concurrent users.
The objective of load testing is to check whether the system can perform well for
specified load. The system may be capable of accommodating more than 1000
concurrent users. But, validating that is not under the scope of load testing. No attempt
is made to determine how many more concurrent users the system is capable of
servicing. Table 1 illustrates the example specified.
http://www.SofTReL.org

65 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Stress testing
Stress testing is another industry term of performance testing. Though load testing &
Stress testing are used synonymously for performancerelated efforts, their goal is
different.
Unlike load testing where testing is conducted for specified number of users, stress
testing is conducted for the number of concurrent users beyond the specified limit. The
objective is to identify the maximum number of users the system can handle before
breaking down or degrading drastically. Since the aim is to put more stress on system,
think time of the user is ignored and the system is exposed to excess load. The goals of
load and stress testing are listed in Table 2. Refer to table 3 for the inference drawn
through the Performance Testing Efforts.
Let us take the same example of online shopping application to illustrate the objective
of stress testing. It determines the maximum number of concurrent users an online
system can service which can be beyond 1000 users (specified limit). However, there is
a possibility that the maximum load that can be handled by the system may found to
be same as the anticipated limit. The Table<##>illustrates the example specified.
Stress testing also determines the behavior of the system as user base increases. It
checks whether the system is going to degrade gracefully or crash at a shot when the
load goes beyond the specified limit.
Table 1: Load and stress testing of illustrative example
Types of

Number of Concurrent users

Duration

Testing
Load Testing

1 User 50 Users 100 Users 250

12 Hours

Stress Testing

Users 500 Users. 1000Users

1 User 50 Users 100 Users 250

12 Hours

Users 500 Users. 1000Users

Beyond 1000 Users.. Maximum
Users

http://www.SofTReL.org

66 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Table 2: Goals of load and stress testing

Types of testing
Load testing

Goals
Testing for anticipated user base

Validates

whether

system

is

capable of handling load under

Stress testing

specified limit
Testing beyond the anticipated
user base

Identifies the maximum load a

system can handle

Checks

whether

the

system

degrades gracefully or crashes

at a shot
Table 3: Inference drawn by load and stress testing
Type of Testing
Load Testing

Inference
Whether system Available?

Stress Testing

If yes, is the available system is stable?

Whether system is Available?
If yes, is the available system is stable?
If Yes, is it moving towards Unstable state?
When the system is going to break down or degrade
drastically?

Conducting performance testing manually is almost impossible. Load and stress tests
are carried out with the help of automated tools. Some of the popular tools to automate
performance testing are listed in table 4.
Table 4: Load and stress testing tools
Tools
LoadRunner
Astra load test
Silk performer
WebLoad
QALoad
e-Load
eValid
WebSpray
TestManager
http://www.SofTReL.org

Vendor
Mercury Interactive Inc
Mercury Interactive Inc
Segue
Radview Software
CompuWare
Empirix Software
Software research Inc
CAI network
Rational
67 of 142

Software Testing Guide Book

Web application center test

OpenLoad
ANTS
OpenSTA
Astra Loadtest
WAPT
Sitestress
Quatiumpro
Easy WebLoad

Part I: Fundamentals of Software Testing

Microsoft technologies
OpenDemand
Red Gate Software
Open source
Mercury interactive Inc
Novasoft Inc
Webmaster solutions
Quatium technologies
PrimeMail Inc

Bug Fixing
Some errors may not occur until the application is under high user load. For Example,
memory leaks can exacerbate server or application problems sustaining high load.
Performance testing helps to detect and fix such problems before launching the
application. It is therefore recommended that developers take an active role in
performance testing their applications, especially at different major milestones of the
development cycle.
12.3.7 Content Management Testing
Content Management has gained a predominant importance after the Web applications
took a major part of our lives. What is Content Management? As the name denotes, it is
managing the content. How do they work? Let us take a common example. You are in
China and you wanted to open the Yahoo! Chinese version. When you choose Chinese
version on the main page of Yahoo! You get to see the entire content in Chinese. Yahoo!
Would strategically plan and have various servers for various languages. When you
choose a particular version of the page, the request is redirected to the server which
manages the Chinese content page. The Content Management systems help is placing
content for various purposes and also help in displaying when the request comes in.
Content Management Testing involves:
1. Testing the distribution of the content.
2. Request, Response Times.
3. Content display on various browsers and operating systems.
4. Load distribution on the servers.
In fact all the performance related testing should be performed for each version of the
web application which uses the content management servers.
12.3.8 Regression Testing
Regression testing as the name suggests is used to test / check the effect of changes
made in the code.
http://www.SofTReL.org

68 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Most of the time the testing team is asked to check last minute changes in the code just
before making a release to the client, in this situation the testing team needs to check
only the affected areas.
So in short for the regression testing the testing team should get the input from the
development team about the nature / amount of change in the fix so that testing team
can first check the fix and then the side effects of the fix.
In my present organization we too faced the same problem. So we made a regression
bucket (this is a simple excel sheet containing the test cases that we need think assure
us of bare minimum functionality) this bucket is run every time before the release.
In fact the regression testing is the testing in which maximum automation can be done.
The reason being the same set of test cases will be run on different builds multiple
times.
But again the extent of automation depends on whether the test cases will remain
applicable over the time, In case the automated test cases do not remain applicable for
some amount of time then test engineers will end up in wasting time to automate and
dont get enough out of automation.

What is Regression testing?

Regression Testing is retesting unchanged segments of application. It involves
rerunning tests that have been previously executed to ensure that the same
results can be achieved currently as were achieved when the segment was last
tested.
The selective retesting of a software system that has been modified to ensure
that any bugs have been fixed and that no other previously working functions
have failed as a result of the reparations and that newly added features have not
created problems with previous versions of the software. Also referred to as
verification testing, regression testing is initiated after a programmer has
attempted to fix a recognized problem or has added source code to a program
that may have inadvertently introduced errors. It is a quality control measure to
ensure that the newly modified code still complies with its specified
requirements and that unmodified code has not been affected by the
maintenance activity.

What do you do during Regression testing?

o

Rerunning of previously conducted tests

Reviewing previously prepared manual procedures

http://www.SofTReL.org

69 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Comparing the current test results with the previously executed test
results

What are the tools available for Regression testing?

Although the process is simple i.e. the test cases that have been prepared can be
used and the expected results are also known, if the process is not automated it
can be very time-consuming and tedious operation.
Some of the tools available for regression testing are:
Record and Playback tools Here the previously executed scripts can be rerun
to verify whether the same set of results are obtained. E.g. Rational Robot

What are the end goals of Regression testing?

o

To ensure that the unchanged system segments function properly

To ensure that the previously prepared manual procedures remain

correct after the changes have been made to the application system

To verify that the data dictionary of data elements that have been
changed is correct

Regression testing as the name suggests is used to test / check the effect of changes
made in the code.
Most of the time the testing team is asked to check the last minute changes in the code
just before making a release to the client, in this situation the testing team needs to
check only the affected areas.
So in short for the regression testing the testing team should get the input from the
development team about the nature / amount of change in the fix so that testing team
can first check the fix and then the affected areas.
In my present organization we too faced the same problem. So we made a regression
bucket (this is a simple excel sheet containing the test cases that we need think assure
us of bare minimum functionality) this bucket is run every time before the release.
In fact the regression testing is the testing in which maximum automation can be done.
The reason being the same set of test cases will be run on different builds multiple
times.

But again the extent of automation depends on whether the test

cases will remain applicable over the time, In case the
http://www.SofTReL.org

70 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

automated test cases do not remain applicable for some amount

of time then test engineers will end up in wasting time to
automate and dont get enough out of automation.

12.4 Alpha Testing

A software prototype stage when the software is first available for run. Here the software
has the core functionalities in it but complete functionality is not aimed at. It would be
able to accept inputs and give outputs. Usually the most used functionalities (parts of
code) are developed more. The test is conducted at the developers site only.
In a software development cycle, depending on the functionalities the number of alpha
phases required is laid down in the project plan itself.
During this, the testing is not a through one, since only the prototype of the software is
available. Basic installation uninstallation tests, the completed core functionalities are
tested. The functionality complete area of the Alpha stage is got from the project plan
document.
Aim

is to identify any serious errors

to judge if the indented functionalities are implemented

to provide to the customer the feel of the software

A through understanding of the product is done now. During this phase, the test plan
and test cases for the beta phase (the next stage) is created. The errors reported are
documented internally for the testers and developers reference. No issues are usually
reported and recorded in any of the defect management/bug trackers

Role of test lead

Understand the system requirements completely.

Initiate the preparation of test plan for the beta phase.

Role of the tester

http://www.SofTReL.org

71 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

to provide input while there is still time to make significant changes as the
design evolves.

Report errors to developers

12.5 User Acceptance Testing

User Acceptance testing occurs just before the software is released to the customer. The
end-users along with the developers perform the User Acceptance Testing with a certain
set of test cases and typical scenarios.

12.6 Installation Testing

Installation testing is often the most under tested area in testing. This type of testing is
performed to ensure that all Installed features and options function properly. It is also
performed to verify that all necessary components of the application are, indeed,
installed.
Installation testing should take care of the following points: 1. To check if while installing product checks for the dependent software / patches
say Service pack3.
2. The product should check for the version of the same product on the target
machine, say the previous version should not be over installed on the newer
version.
3. Installer should give a default installation path say C:\programs\.
4. Installer should allow user to install at location other then the default
installation path.
5. Check if the product can be installed Over the Network
6. Installation should start automatically when the CD is inserted.
7. Installer should give the remove / Repair options.
8. When uninstalling, check that all the registry keys, files, Dll, shortcuts, active X
components are removed from the system.
9. Try to install the software without administrative privileges (login as guest).
10. Try installing on different operating system.
Try installing on system having non-compliant configuration such as less memory /
RAM / HDD.

http://www.SofTReL.org

72 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

12.7 Beta Testing

The Beta testing is conducted at one or more customer sites by the end-user of the
software. The beta test is a live application of the software in an environment that
cannot be controlled by the developer.
The Software reaches beta stage when most of the functionalities are operating.
The software is tested in customers environment, giving user the opportunity to
exercise the software, find the errors so that they could be fixed before product release.
Beta testing is a detailed testing and needs to cover all the functionalities of the product
and also the dependent functionality testing. It also involves the UI testing and
documentation testing. Hence it is essential that this is planned well and the task
accomplished. The test plan document has to be prepared before the testing phase is
started, which clearly lays down the objectives, scope of test, tasks to be performed and
the test matrix which depicts the schedule of testing.
Beta Testing Objectives

Evaluate software technical content

Evaluate software ease of use

Evaluate user documentation draft

Identify errors

Report errors/findings

Role of a Test Lead

Provide Test Instruction Sheet that describes items such as testing objectives,
steps to follow, data to enter, functions to invoke.

Provide feedback forms and comments.

Role of a tester

Understand the software requirements and the testing objectives.

Carry out the test cases

Report defects

13. Understanding Exploratory Testing

"Exploratory testing involves simultaneously learning,
planning, running tests, and reporting / troubleshooting
http://www.SofTReL.org

73 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Results."
- Dr. Cem Kaner.
"Exploratory testing is an interactive process of concurrent
product exploration, test design and test execution. To the
extent that the next test we do is influenced by the result
of the last test we did, we are doing exploratory testing.
- James Bach.
Exploratory testing is defined as simultaneous test design, test execution and bug
reporting. In this approach the tester explores the system (finding out what it is and
then testing it) without having any prior test cases or test scripts. Because of this
reason it also called as ad hoc testing, guerrilla testing or intuitive testing. But there is
some difference between them. In operational terms, exploratory testing is an
interactive process of concurrent product exploration, test design, and test execution.
The outcome of an exploratory testing session is a set of notes about the product,
failures found, and a concise record of how the product was tested. When practiced by
trained testers, it yields consistently valuable and auditable results. Every tester
performs this type of testing at one point or the other. This testing totally depends on
the skill and creativity of the tester. Different testers can explore the system in different
ways depending on their skills. Thus the tester has a very vital role to play in
exploratory testing.
This approach of testing has also been advised by SWEBOK for testing since it might
uncover the bugs, which the normal testing might not discover. A systematic approach
of exploratory testing can also be used where there is a plan to attack the system under
test. This systematic approach of exploring the system is termed Formalized exploratory
testing.
Exploratory testing is a powerful approach in the field of testing. Yet this
approach has not got the recognition and is often misunderstood and not gained the
respect it needs. In many situations it can be more productive than the scripted testing.
But the real fact is that all testers do practice this methodology sometime or the other,
most often unknowingly!
Exploratory testing believes in concurrent phases of product exploration, test
design and test execution. It is categorized under Black-box testing. It is basically a
free-style testing approach where you do not begin with the usual procedures of
elaborate test plans and test steps. The test plan and strategy is very well in the testers
mind. The tester asks the right question to the product / application and judges the

http://www.SofTReL.org

74 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

outcome. During this phase he is actually learning the product as he tests it. It is
interactive and creative. A conscious plan by the tester gives good results.
Human beings are unique and think differently, with a new set of ideas
emerging. A tester has the basic skills to listen, read, think and report. Exploratory
testing is just trying to exploit this and structure it down. The richness of this process
is only limited to the breadth and depth of our imagination and the insight into the
product under test.
How does it differ from the normal test procedures?
The definition of exploratory testing conveys the difference. In the normal testing
style, the test process is planned well in advance before the actual testing begins. Here
the test design is separated from the test execution phase. Many a times the test design
and test execution is entrusted on different persons.
Exploratory testing should not be confused with the dictionary meaning of adhoc. Ad hoc testing normally refers to a process of improvised, impromptu bug
searching. By definition, anyone can do ad hoc testing. The term exploratory testing-by Dr. Cem Kaner, in Testing Computer Software--refers to a sophisticated, systematic,
thoughtful approach to ad hoc testing.
What is formalized Exploratory Testing?
A structured and reasoned approach to exploratory testing is termed as Formalized
Exploratory Testing. This approach consists of specific tasks, objectives, and
deliverables that make it a systematic process.
Using the systematic approach (i.e. the formalize approach) an outline of what to
attack first, its scope, the time required to be spent etc is achieved. The
approach might be using simple notes to more descriptive charters to some
vague scripts. By using the systematic approach the testing can be more
organized focusing at the goal to be reached. Thus solving the problem where
the pure Exploratory Testing might drift away from the goal.
When we apply Exploratory Planning to Testing, we create Exploratory planning.
The formalized approach used for the Exploratory Testing can vary depending on
the various criteria like the resource, time, the knowledge of the application
available etc. Depending on these criteria, the approach used to attack the
http://www.SofTReL.org

75 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

system will also vary. It may involve creating the outlines on the notepad to
more sophisticated way by using charters etc. Some of the formal approaches
used for Exploratory Testing can be summarized as follows.
Identify the application domain.
The exploratory testing can be performed by identifying the application
domain. If the tester has good knowledge of domain, then it would be
easier to test the system without having any test cases. If the tester were
well aware of the domain, it would help analyzing the system faster and
better. His knowledge would help in identifying the various workflows
that usually exist in that domain. He would also be able to decide what
are the different scenarios and which are most critical for that system.
Hence he can focus his testing depending on the scenarios required. If a
QA lead is trying to assign the tester to a task, it is advisable that the
tester identifies the person who has the domain knowledge of that
system for ET.
For example, consider software has been built to generate the invoices
for its customers depending on the number of the units of power that
has been consumed. In such a case exploratory testing can be done by
identifying the domain of the application. A tester who has experience of
the billing systems for the energy domain would fit better than one who
does not have any knowledge. The tester who has knowledge in the
application domain knows the terminology used as well the scenarios
that would be critical to the system. He would know the ways in which
various computations are done. In such a case, tester with good
knowledge would be familiar to the terms like to line item, billing rate,
billing cycle and the ways in which the computation of invoice would be
done. He would explore the system to the best and takes lesser time. If
the tester does not have domain knowledge required, then it would take
time to understand the various workflows as well the terminology used.
He might not be able to focus on critical areas rather focus on the other
areas.
Identify the purpose.
Another approach to Exploratory Testing is by identifying the purpose of
the system i.e. What is that system used for. By identifying the purpose
http://www.SofTReL.org

76 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

try to analyze to what extent it is used. The effort can be more focused by
identifying the purpose.
For example, consider software developed to be used in Medical
operations. In such case care should be taken that the software build is
100% defect free. Hence the effort that needs to be focused is more and
care should be taken that the various workflows involved are covered.
On the other hand, if the software build is to provide some entertainment
then the criticality is lesser. Thus effort that needs to be focused varies.
Identifying the purpose of the system or the application to be tested
helps to a great extent.
Identify the primary and secondary functions.
Primary Function: Any function so important that, in the estimation of a
normal user, its inoperability or impairment would render the product
unfit for its purpose. A function is primary if you can associate it with
the purpose of the product and it is essential to that purpose. Primary
functions define the product. For example, the function of adding text to
a document in Microsoft Word is certainly so important that the product
would be useless without it. Groups of functions, taken together, may
constitute a primary function, too. For example, while perhaps no single
function on the drawing toolbar of Word would be considered primary,
the entire toolbar might be primary. If so, then most of the functions on
that toolbar should be operable in order for the product to pass
Certification.
Secondary

Function

or

contributing

function:

Any

function

that

contributes to the utility of the product, but is not a primary function.

Even though contributing functions are not primary, their inoperability
may be grounds for refusing to grant Certification. For example, users
may be technically able to do useful things with a product, even if it has
an Undo function that never works, but most users will find that
intolerable. Such a failure would violate fundamental expectations about
how Windows products should work.

http://www.SofTReL.org

77 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Thus by identifying the primary function and secondary functions for the
system, testing can be done where more focus and effort can be given to
Primary functions compared to the secondary functions.
Example: Consider a web based application developed for online
shopping. For such an application we can identify the primary functions
and secondary functions and go ahead with Exploratory Testing. The
main functionality of that application is that the items selected by the
user need to be properly added to the shopping cart and price to be paid
is properly calculated. If there is online payment, then security is also an
aspect. These can be considered as the primary functions.
Whereas the bulletin board provided or the mail functionality provided
are considered as the secondary functions. Thus testing to be performed
is more focused at the primary functions rather than on the secondary
functions. If the primary functions do not work as required then the
main intention of having the application is lost.
Identify the workflows.
Identifying the workflows for testing any system without any scripted test
cases can be considered as one of the best approaches used. The
workflows are nothing but a visual representation of the scenarios as the
system would behave for any given input. The workflows can be simple
flow charts or Data Flow Diagrams (DFD) or the something like state
diagrams, use cases, models etc. The workflows will also help to identify
the scope for that scenario. The workflows would help the tester to keep
track of the scenarios for testing. It is suggested that the tester navigates
through the application before he starts exploring. It helps the tester in
identifying the various possible workflows and issues any found which he
is comfortable can be discussed with the concerned team.
Example: Consider a web application used for online shopping. The
application has various links on the web page. If tester is trying to test if
the items that he is adding to cart are properly being added, then he
should know the flow for the same. He should first identify the workflow
for such a scenario. He needs to login and then select a category and
identify the items and then add the item he would require. Thus without

http://www.SofTReL.org

78 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

knowing the workflow for such a scenario would not help the tester and
in the process loses his time.
In case he is not aware of the system, try to navigate through the
application once and get comfortable. Once the application is dully
understood, it is easier to test and explore more bugs.
Identify the break points.
Break points are the situations where the system starts behaving
abnormally. It does not give the output it is supposed to give. So by
identifying such situations also testing can be done. Use boundary
values or invariance for finding the break points of the application. In
most of the cases it is observed that system would work for normal
inputs or outputs. Try to give input that might be the ideal situation or
the worse situation.
Example: consider an application build to generate the reports for the
accounts department of a company depending on the criteria given. In
such cases try to select a worse case of report generation for all the
employees for their service. The system might not behave normally in the
situation.
Try to input a large input file to the application that provides the user to
upload and save the data given.
Try to input 500 characters in the text box of the web application.
Thus by trying to identify the extreme conditions or the breakpoints
would help the tester to uncover the hidden bugs. Such cases might not
be covered in the normal scripted testing. Hence this helps in finding the
bugs which might not covered in the normal testing.
Check UI against Windows interface etc standards.
The Exploratory Testing can be performed by identifying the User
interface standards. There are set standards laid down for the user
interfaces that need to be developed. These user standards are nothing
but the look and feel aspects of the interfaces the user interacts with.
The user should be comfortable with any of the screens that (s)he
working. These aspects help the end user to accept the system faster.
http://www.SofTReL.org

79 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Example: For Web application,

o

Is the background as per the standards? If the bright background is

used, the user might not feel comfortable.

What is size of the font used?

Are the buttons of the required size and are they placed in the
comfortable location.

Sometimes the applications are developed to avoid usage of the scroll

bar. The content can be seen with out the need to scroll.

By identifying the User standards, define an approach to test because the

application developed should be user friendly for the users usage. He should
feel comfortable while using the system. The more familiar and easier the
application for usage, faster the user feels comfortable to the system.
Identify expected results.
The tester should know what he is testing for and expected output for the
given input. Until and unless the aim of his testing is not known, there is
no use of the testing done. Because the tester may not succeed in
distinguishing the real error and normal workflow. First he needs to
analyze what is the expected output for the scenario he is testing.
Example: Consider software used to provide the user with an interface to
search for the employee name in the organization given some of the
inputs like the first name or last name or his id etc. For such a scenario,
the tester should identify the expected output for any combination of
input values. If the input provided does not result in any data and shows
a message Error not data found. The tester should not misinterpret this
as an error, because this might be as per requirement when no data is
found. Instead for a given input, the message shown is 404- File not
found, the tester should identify it as an error not a requirement. Thus
he should be able to distinguish between an error and normal workflow.
Identify the interfaces with other interfaces/external applications.
In the age of component development and maximum reusability,
developers try to pick up the already developed components and
integrate them. Thus, achieving the desired result in short time. In some
http://www.SofTReL.org

80 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

cases it would help the tester explore the areas where the components
are coupled. The output of one component should be correctly sent to
other component. Hence such scenarios or workflows need to be
identified and explored more. More focus on some of the shown areas
that are more error prone.
Example: consider the online shopping application. The user adds the
items to his cart and proceeds to the payments details page. Here the
items added, their quantity etc should be properly sent to the next
module. If there is any error in any of the data transfer process, the pay
details will not be correct and the user will be billed wrong. There by
leading to a major error. In such a scenario, more focus is required in the
interfaces.
There may be external interfaces, like the application is integrated with
another application for the data. In such cases, focus should be more on
the interface between the two applications. How data is being passed, is
correct data being passed, if there is large data, is transfer of entire data
done or is system behaving abnormally when there is large data are few
points which should be addressed.

Record failures
In exploratory testing, we do the testing without having any documented
test cases. If a bug has been found, it is very difficult for us to test it after
fix. This is because there are no documented steps to navigate to that
particular scenario. Hence we need to keep track of the flow required to
reach where a bug has been found. So while testing, it is important that
at least the bugs that have been discovered are documented. Hence by
recording failures we are able to keep track of work that has been done.
This would also help even if the tester who was actually doing ET is not
available. Since the document can be referred and list all the bugs that
have been reported as well the flows for the same can be identified.
Example: for example consider the online shopping site. A bug has been
found while trying to add the items of given category into the cart. If the
tester can just document the flow as well as the error that has occurred,
http://www.SofTReL.org

81 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

it would help the tester himself or any other tester. It can be referred
while testing the application after a fix.
Document issues and question.
The tester trying to test an application using Exploratory Testing
methodology should feel comfortable to test. Hence it is advisable that
the tester navigates through the application once and notes any
ambiguities or queries he might feel. He can even get the clarification on
the workflows he is not comfortable. Hence by documenting all the issues
and questions that have been found while scanning or navigating the
application can help the tester have testing done without any loss in
time.
Decompose the main task into smaller tasks .The smaller ones to still smaller
activities.
It is always easier to work with the smaller tasks when compared to large
tasks. This is very useful in performing Exploratory Testing because lack
of test cases might lead us to different routes. By having a smaller task,
the scope as well as the boundary are confined which will help the tester
to focus on his testing and plan accordingly.
If a big task is taken up for testing, as we explore the system, we might
get deviated from our main goal or task. It might be hard to define
boundaries if the application is a new one. With smaller tasks, the goal is
known and hence the focus and the effort required can be properly
planned.
Example: An application that provides email facility. The new users can
register and use the application for the email. In such a scenario, the
main task itself can be divided into smaller tasks. One task to check if
the UI standards are met and it is user friendly. The other task is to test
if the new users are able to register with the application and use email
facility.
Thus the two tasks are smaller which will the corresponding groups to
focus their testing process.
Charter- states the goal and the tactics to be used.

http://www.SofTReL.org

82 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Charter Summary:
o

Architecting the Charters i.e. Test Planning

Brief information / guidelines on:

Mission: Why do we test this?

What should be tested?

How to test (approach)?

What problems to look for?

Might include guidelines on:

Tools to use

Specific Test Techniques or tactics to use

What risks are involved

Documents to examine

Desired output from the testing.

A charter can be simple one to more descriptive giving the strategies and
outlines for the testing process.
Example: Test the application for report generation.
Or.
Test the application if the report is being generated for the date before
01/01/2000.Use the use cases models for identifying the workflows.

Session Based Test Management(SBTM):

Session Based Test Management is a formalized approach that uses the
concept of charters and the sessions for performing the ET.
A session is not a test case or bug report. It is the reviewable product
produced by chartered and uninterrupted test effort. A session can last
from 60 to 90 minutes, but there is no hard and fast rule on the time
spent for testing. If a session lasts closer to 45 minutes, we call it a short
session. If it lasts closer to two hours, we call it a long session. Each

http://www.SofTReL.org

83 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

session designed depends on the tester and the charter. After the session
is completed, each session is debriefed. The primary objective in the
debriefing is to understand and accept the session report. Another
objective is to provide feedback and coaching to the tester. The
debriefings would help the manager to plan the sessions in future and
also to estimate the time required for testing the similar functionality.
The debriefing session is based on agenda called PROOF.
Past: What happened during the session?
Results: What was achieved during the session?
Outlook: What still needs to be done?
Obstacles: What got in the way of good testing?
Feeling: How does the tester feel about all this?
The time spent on charter and on opportunity is also noted.
Opportunity testing is any testing that doesnt fit the charter of the
session. The tester is not restricted to his charter, and hence allowed to
deviate from the goal specified if there is any scope of finding an error.
A session can be broadly classified into three tasks (namely the TBS
metrics).
Session test up: Time required in setting up the application under test.
Test design and execution: Time required scanning the product and test.
Bug investigation and reporting: Time required finding the bugs and
reporting to the concerned.
The entire session report consists of these sections:
Session charter (includes a mission statement, and areas to be
tested)
Tester name(s)
Date and time started
http://www.SofTReL.org

84 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Task breakdown (the TBS metrics)

Data files
Test notes
Issues
Bugs
For each session, a session sheet is made. The session sheet
consist of the mission of testing, the tester details, duration of
testing, the TBS metrics along with the data related to testing like
the bugs, notes, issues etc. Data files if any used in the testing
would also be enclosed. The data collected during different testing
sessions are collected and exported to Excel or some database. All
the sessions, the bugs reported etc can be tracked using the
unique id associated with each. It is easy for the client as well to
keep track. Thus this concept of testers testing in sessions and
producing the required output which are trackable is called as
Session based test management.

Defect Driven Exploratory Testing:

Defect driven exploratory testing is another formalized approach used for
ET.
Defect Driven Exploratory Testing (DDET) is a goal-oriented approach focused on
the critical areas identified on the Defect analysis study based on Procedural
Testing results.
In Procedural testing, the tester executes readily available test cases, which are
written based on the requirement specifications. Although the test cases are
executed completely, defects were found in the software while doing exploratory
testing by just wandering through the product blindly. Just exploring the
product without sight was akin to groping in the dark and did not help the
testers unearth all the hidden bugs in the software as they were not very sure
about the areas that needed to be explored in the software. A reliable basis was
needed for exploring the software. Thus Defect driven exploratory testing is an
idea of exploring that part of the product based on the results obtained during
procedural testing. After analyzing the defects found during the DDET process,

http://www.SofTReL.org

85 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

it was found that these were the most critical bugs, which were camouflaged in
the software and which if present could have made the software Not fit for Use.
There are some pre requisites for DDET:
o

In-depth knowledge of the product.

Procedural Testing has to be carried out.

Defect Analysis based on Scripted Tests.

Advantages of DDET:
o

Tester has clear clues on the areas to be explored.

Goal oriented approach , hence better results

No wastage of time.

Where does Exploratory Testing Fit:

In general, ET is called for in any situation where its not obvious what the next test
should be, or when you want to go beyond the obvious tests. More specifically, freestyle
Exploratory Testing fits in any of the following situations:
You need to provide rapid feedback on a new product or feature.
You need to learn the product quickly.
You have already tested using scripts, and seek to diversify the testing.
You want to find the single most important bug in the shortest time.
You want to check the work of another tester by doing a brief independent
Investigation.
You want to investigate and isolate a particular defect.
You want to investigate the status of a particular risk, in order to evaluate the
need for scripted tests in that area.
Pros and Cons:
Pros
Does not require extensive documentation.
Responsive to changing scenarios.
Under tight schedules, testing can be more focused depending on the bug rate
or risks.
Improved coverage.
Cons
Dependent on the testers skills.
Test tracking not concrete.
http://www.SofTReL.org

86 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

More prone to human error.

No contingency plan if the tester is unavailable.

What specifics affect Exploratory Testing?
Here is a list that affects exploratory testing:

The mission of the particular test session

The tester skills, talents, preferences

Available time and other resources

The status of other testing cycles for the product

How much the tester knows about the product

Mission
The goal of testing needs to be understood first before the work begins. This
could be the overall mission of the test project or could be a particular functionality /
scenario. The mission is achieved by asking the right questions about the product,
designing tests to answer these questions and executing tests to get the answers. Often
the tests do not completely answer, in such cases we need to explore. The test
procedure is recorded (which could later form part of the scripted testing) and the result
status too.
Tester
The tester needs to have a general plan in mind, though may not be very
constrained. The tester needs to have the ability to design good test strategy, execute
good tests, find important problems and report them. He simply has to think out of the
box.
Time
Time available for testing is a critical factor. Time falls short due to the following
reasons:
o

Many a time in project life cycles, the time and resources required in creating
the test strategy, test plan and design, execution and reporting is overlooked.
Exploratory testing becomes useful since the test plan, design and execution
happen together.

Also when testing is essential on a short period of notice

A new feature is implemented

http://www.SofTReL.org

87 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Change request come in much later stage of the cycle when much of the testing
is done with

In such situations exploratory testing comes handy.

Practicing Exploratory Testing
A basic strategy of exploratory testing is to have a general plan of attack, but
also allow yourself to deviate from it for short period of time.
In a session of exploratory testing, a set of test ideas, written notes (simple
English or scripts) and bug reports are the results. This can be reviewed by the test
lead / test manager.

Test Strategy

It is important to identify the scope of the test to be carried. This is dependent on

the project approach to testing. The test manager / test lead can decide the scope
and convey the same to the test team.

Test design and execution

The tester crafts the test by systematically exploring the product. He defines his
approach, analyze the product, and evaluate the risk

Documentation

The written notes / scripts of the tester are reviewed by the test lead / manager.
These later form into new test cases or updated test materials.
Where does Exploratory Testing Fit?
Exploratory testing fits almost in any kind of testing projects, projects with
rigorous test plans and procedures or in projects where testing is not dictated
completely in advance. The situations where exploratory testing could fit in are:

Need to provide a rapid feedback on a new feature implementation / product

Little product knowledge and need to learn it quickly

Product analysis and test planning

Done with scripted testing and need to diversify more

Improve the quality of existing test scripts

Write new scripts

The basic rule is this: exploratory testing is called for any time the next test you should
perform is not obvious, or when you want to go beyond the obvious.
http://www.SofTReL.org

88 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

A Good Exploratory Tester

Exploratory testing approach relies a lot on the tester himself. The tester actively
controls the design of tests as they are performed and uses the information gained to
design new and better ideas.
A good exploratory tester should

Have the ability to design good tests, execute them and find important
problems

Should document his ideas and use them in later cycles.

Must be able to explain his work

Be a careful observer: Exploratory testers are more careful observers than

novices and experienced scripted testers. Scripted testers need only observe
what the script tells. Exploratory tester must watch for anything unusual or
mysterious.

Be a critical thinker: They are able to review and explain their logic, looking
out for errors in their own thinking.

Have diverse ideas so as to make new test cases and improve existing ones.

A good exploratory tester always asks himself, whats the best test I can perform now?
They remain alert for new opportunities.
Advantages
Exploratory testing is advantageous when

Rapid testing is essential

Test case development time not available

Need to cover high risk areas with more inputs

Need to test software with little knowledge about the specifications

Develop new test cases or improve the existing

Drive out monotony of normal step by - step test execution

Drawbacks

Skilled tester required

Difficult to quantize

Balancing Exploratory Testing with Scripted Testing

Exploratory testing relies on the tester and the approach he proceeds with. Pure
scripted testing doesnt undergo much change with time and hence the power fades
away. In test scenarios where in repeatability of tests are required, automated scripts

http://www.SofTReL.org

89 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

having an edge over exploratory approach. Hence it is important to achieve a balance

between the two approaches and combine the two to get the best of both.

14. Understanding Scenario Based Testing

Scenario Based Tests (SBT) are best suited when you need to tests need to concentrate
on the functionality of the application, than anything else.
Let us take an example, where you are testing an application which is quite old (a
legacy application) and it is a banking application. This application has been built
based on the requirements of the organization for various banking purposes. Now, this
application will have continuous upgrades in the working (technology wise and
business wise). What do you do to test the application?
Let us assume that the application is undergoing only functional changes and not the
UI changes. The test cases should be updated for every release. Over a period of time,
maintaining the test ware becomes a major set back. The Scenario Based Tests would
help you here.
As per the requirements, the base functionality is stable and there are no UI changes.
There are only changes with respect to the business functionality. As per the
requirements and the situation, we clearly understand that only regression tests need
to be run continuously as part of the testing phase. Over a period of time, the individual
test cases would become difficult to manage. This is the situation where we use
Scenarios for testing.
What do you do for deriving Scenarios?
We can use the following as the basis for deriving scenarios:
5. From the requirements, list out all the functionalities of the application.
6. Using a graph notation, draw depictions of various transactions which pass through
various functionalities of the application.
7. Convert these depictions into scenarios.
8. Run the scenarios when performing the testing.
Will you use Scenario Based Tests only for Legacy application testing?
No. Scenario Based Tests are not only for legacy application testing, but for any
application which requires you to concentrate more on the functional requirements. If
you can plan out a perfect test strategy, then the Scenario Based Tests can be used for
any application testing and for any requirements.
Scenario Based tests will be a good choice with a combination of various test types and
techniques when you are testing projects which adopt UML (Unified Modeling Language)
based development strategies.

http://www.SofTReL.org

90 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

You can derive scenarios based on the Use Cases. Use Cases provide good coverage of
the requirements and functionality.

15. Understanding Agile Testing

The concept of Agile testing rests on the values of the Agile Alliance Values, which
states that:
We have come to value:
Individuals and interactions over processes and tools
Working software over comprehensive documentation
Customer collaboration over contract negotiation
Responding to change over following a plan
That is, while there is value in the items on the right, we value the items on the left
more." - http://www.agilemanifesto.org/
What is Agile testing?

1) Agile testers treat the developers as their customer and follow the agile
manifesto. The Context driven testing principles (explained in later part) act as a
set of principles for the agile tester.

2)

Or it can be treated as the testing methodology followed by testing team when

an entire project follows agile methodologies. If so what is the role of a tester in
such a fast paced methodology?)

Traditional QA seems to be totally at loggerheads with the Agile manifesto in the

following regard where:

Process and tools are a key part of QA and testing.

QA people seem to love documentation.

QA people want to see the written specification.

And where is testing without a PLAN?

So the question arises is there a role for QA in Agile projects?

There answer is maybe but the roles and tasks are different.
http://www.SofTReL.org

91 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

In the first definition of Agile testing we described it as one following the Context driven
principles.
The context driven principles which are guidelines for the agile tester are:
1. The value of any practice depends on its context.
2. There are good practices in context, but there are no best practices.
3. People, working together, are the most important part of any projects context.
4. Projects unfold over time in ways that are often not predictable.
5. The product is a solution. If the problem isnt solved, the product doesnt work.
6. Good software testing is a challenging intellectual process.
7. Only through judgment and skill, exercised cooperatively throughout the entire
project, are we able to do the right things at the right times to effectively test our
products.
http://www.context-driven-testing.com/
In the second definition we described Agile testing as a testing methodology adopted
when an entire project follows Agile (development) Methodology. We shall have a look at
the Agile development methodologies being practiced currently:
Agile Development Methodologies

Extreme Programming (XP)

Crystal

Adaptive Software Development (ASD)

Scrum

Feature Driven Development (FDD)

Dynamic Systems Development Method (DSDM)

Xbreed

In a fast paced environment such as in Agile development the question then arises
as to what is the Role of testing?
Testing is as relevant in an Agile scenario if not more than a traditional software
development scenario.
http://www.SofTReL.org

92 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Testing is the Headlight of the agile project showing where the project is standing
now and the direction it is headed.
Testing provides the required and relevant information to the teams to take
informed and precise decisions.
The testers in agile frameworks get involved in much more than finding software
bugs, anything that can bug the potential user is a issue for them but testers
dont make the final call, its the entire team that discusses over it and takes a
decision over a potential issues.
A firm belief of Agile practitioners is that any testing approach does not assure
quality its the team that does (or doesnt) do it, so there is a heavy emphasis on the
skill and attitude of the people involved.
Agile Testing is not a game of gotcha, its about finding ways to set goals rather
than focus on mistakes.
Among

these

Agile

methodologies

mentioned

we

shall

look

at

XP

(Extreme

Programming) in detail, as this is the most commonly used and popular one.
The basic components of the XP practices are:

Test- First Programming

Pair Programming

Short Iterations & Releases

Refactoring

User Stories

Acceptance Testing

We shall discuss these factors in detail.

Test-First Programming

Developers write unit tests before coding. It has been noted that this kind of
approach motivates the coding, speeds coding and also and improves design
results in better designs (with less coupling and more cohesion)

It supports a practice called Refactoring (discussed later on).

http://www.SofTReL.org

93 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Agile practitioners prefer Tests (code) to Text (written documents) for

describing system behavior. Tests are more precise than human language
and they are also a lot more likely to be updated when the design changes.
How many times have you seen design documents that no longer accurately
described the current workings of the software? Out-of-date design
documents look pretty much like up-to-date documents. Out-of-date tests
fail.

Many open source tools like xUnit have been developed to support this
methodology.

Refactoring

Refactoring is the practice changing a software system in such a way that

it does not alter the external behavior of the code yet improves its internal
structure.

Traditional development tries to understand how all the code will work
together in advance. This is the design. With agile methods, this difficult
process of imagining what code might look like before it is written is
avoided. Instead, the code is restructured as needed to maintain a
coherent design. Frequent refactoring allows less up-front planning of
design.

Agile

methods

replace

high-level

design

with

frequent

redesign

(refactoring). Successful refactoring But it also requires a way of ensuring

checking whether that the behavior wasnt inadvertently changed. Thats
where the tests come in.

Make the simplest design that will work and add complexity only when
needed and refactor as necessary.

Refactoring requires unit tests to ensure that design changes (refactorings)

dont break existing code.

Acceptance Testing

Make up user experiences or User stories, which are short descriptions of

the features to be coded.

Acceptance tests verify the completion of user stories.

Ideally they are written before coding.

http://www.SofTReL.org

94 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

With all these features and process included we can define a practice for Agile testing
encompassing the following features.

Conversational Test Creation

Coaching Tests

Providing Test Interfaces

Exploratory Learning

Looking deep into each of these practices we can describe each of them as:
Conversational Test Creation

Test case writing should be a collaborative activity including majority of the

entire team. As the customers will be busy we should have someone
representing the customer.

Defining tests is a key activity that should include programmers and

customer representatives.

Don't do it alone.

Coaching Tests

A way of thinking about Acceptance Tests.

Turn user stories into tests.

Tests should provide Goals and guidance, Instant feedback and Progress
measurement

Tests should be in specified in a format that is clear enough that users/

customers can understand and that is specific enough that it can be
executed

Specification should be done by example.

Providing Test Interfaces

Developers are responsible for providing the fixtures that automate coaching
tests

In most cases XP teams are adding test interfaces to their products, rather
than using external test tools
Test Interaction Model

http://www.SofTReL.org

95 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Exploratory Learning

Plan to explore, learn and understand the product with each iteration.

Look for bugs, missing features and opportunities for improvement.

We dont understand software until we have used it.

We believe that Agile Testing is a major step forward. You may disagree. But regardless
Agile Programming is the wave of the future. These practices will develop and some of
the extreme edges may be worn off, but its only growing in influence and attraction.
Some testers may not like it, but those who dont figure out how to live with it are
simply going to be left behind.
Some testers are still upset that they dont have the authority to block the release. Do
they think that they now have the authority to block the adoption of these new
development methods? Theyll need to get on this ship and if they want to try to keep it
from the shoals. Stay on the dock if you wish. Bon Voyage!

16. API Testing

Application programmable Interfaces (APIs) are collections of software functions or
procedures that can be used by other applications to fulfill their functionality. APIs
provide an interface to the software component. These form the critical elements for the
developing the applications and are used in varied applications from graph drawing
http://www.SofTReL.org

96 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

packages, to speech engines, to web-based airline reservation systems, to computer

security components.
Each API is supposed to behave the way it is coded, i.e. it is functionality specific. These
APIs may offer different results for different type of the input provided. The errors or the
exceptions returned may also vary. However once integrated within a product, the
common functionality covers a very minimal code path of the API and the functionality
testing / integration testing may cover only those paths. By considering each API as a
black box, a generalized approach of testing can be applied. But, there may be some
paths which are not tested and lead to bugs in the application. Applications can be
viewed and treated as APIs from a testing perspective.
There are some distinctive attributes that make testing of APIs slightly different from
testing other common software interfaces like GUI testing.

Testing APIs requires a thorough knowledge of its inner workings - Some APIs may
interact with the OS kernel, other APIs, with other software to offer their
functionality. Thus an understanding of the inner workings of the interface
would help in analyzing the call sequences and detecting the failures caused.

Adequate programming skills - API tests are generally in the form of sequences of
calls, namely, programs. Each tester must possess expertise in the programming
language(s) that are targeted by the API. This would help the tester to review and
scrutinize the interface under test when the source code is available.

Lack of Domain knowledge Since the testers may not be well trained in using
the API, a lot of time might be spent in exploring the interfaces and their usage.
This problem can be solved to an extent by involving the testers from the initial
stage of development. This would help the testers to have some understanding
on the interface and avoid exploring while testing.

No documentation Experience has shown that it is hard to create precise and

readable documentation. The APIs developed will hardly have any proper
documentation available. Without the documentation, it is difficult for the test
designer to understand the purpose of calls, the parameter types and possible
valid/invalid values, their return values, the calls it makes to other functions,

http://www.SofTReL.org

97 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

and usage scenarios. Hence having proper documentation would help test
designer design the tests faster.

Access to source code The availability of the source code would help tester to
understand and analyze the implementation mechanism used; and can identify
the loops or vulnerabilities that may cause errors. Thus if the source code is not
available then the tester does not have a chance to find anomalies that may
exist in the code.

Time constraints Thorough testing of APIs is time consuming, requires a

learning overhead and resources to develop tools and design tests. Keeping up
with deadlines and ship dates may become a nightmare.

Testing of API calls can be done in isolation or in Sequence to vary the order in which
the functionality is exercised and to make the API produce useful results from these
tests. Designing tests is essentially designing sequences of API calls that have a
potential of satisfying the test objectives. This in turn boils down to designing each call
with specific parameters and to building a mechanism for handling and evaluating
return values.
Thus designing of the test cases can depend on some of the general questions like

Which value should a parameter take?

What values together make sense?

What combination of parameters will make APIs work in a desired manner?

What combination will cause a failure, a bad return value, or an anomaly in the
operating environment?

Which sequences are the best candidates for selection? etc.

Some interesting problems for testers being

1. Ensuring that the test harness varies parameters of the API calls in ways that verify
functionality and expose failures. This includes assigning common parameter values
as well as exploring boundary conditions.
2. Generating interesting parameter value combinations for calls with two or more
parameters.

http://www.SofTReL.org

98 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

3. Determining the content under which an API call is made. This might include
setting external environment conditions (files, peripheral devices, and so forth) and
also internal stored data that affect the API.
4. Sequencing API calls to vary the order in which the functionality is exercised and to
make the API produce useful results from successive calls.
By analyzing the problems listed above, a strategy needs to be formulated for testing the
API. The API to be tested would require some environment for it to work. Hence it is
required that all the conditions and prerequisites understood by the tester. The next
step would be to identify and study its points of entry. The GUIs would have items like
menus, buttons, check boxes, and combo lists that would trigger the event or action to
be taken. Similarly, for APIs, the input parameters, the events that trigger the API
would act as the point of entry. Subsequently, a chief task is to analyze the points of
entry as well as significant output items. The input parameters should be tested with
the valid and invalid values using strategies like the boundary value analysis and
equivalence partitioning. The fourth step is to understand the purpose of the routines,
the contexts in which they are to be used. Once all this parameter selections and
combinations are designed, different call sequences need to be explored.
The steps can be summarized as following
1. Identify the initial conditions required for testing.
2. Identify the parameters Choosing the values of individual parameters.
3. Identify the combination of parameters pick out the possible and applicable
parameter combinations with multiple parameters.
4. Identify the order to make the calls deciding the order in which to make the calls
to force the API to exhibit its functionality.
5. Observe the output.
1.Identify the initial condition:
The testing of an API would depend largely on the environment in which it is to be
tested. Hence initial condition plays a very vital role in understanding and verifying the
behavior of the API under test. The initial conditions for testing APIs can be classified as

Mandatory pre-setters.

Behavioral pre-setters.

http://www.SofTReL.org

99 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Mandatory Pre-setters
The execution of an API would require some minimal state, environment. These type of
initial conditions are classified under the mandatory initialization (Mandatory presetters) for the API. For example, a non-static member function API requires an object
to be created before it could be called. This is an essential activity required for invoking
the API.
Behavioral pre-setters
To test the specific behavior of the API, some additional environmental state is required.
These types of initial conditions are called the behavioral pre-setters category of Initial
condition. These are optional conditions required by the API and need to be set before
invoking the API under test thus influencing its behavior. Since these influence the
behavior of the API under test, they are considered as additional inputs other than the
parameters
Thus to test any API, the environment required should also be clearly understood and
set up. Without these criteria, API under test might not function as required and leave
the testers job undone.
2.Input/Parameter Selection: The list of valid input parameters need to be identified
to verify that the interface actually performs the tasks that it was designed for. While
there is no method that ensures this behavior will be tested completely, using inputs
that return quantifiable and verifiable results is the next best thing. The different
possible input values (valid and invalid) need to be identified and selected for testing.
The techniques like the boundary values analysis and equivalence-partitioning need to
be used while trying to consider the input parameter values. The boundary values or
the limits that would lead to errors or exceptions need to be identified. It would also be
helpful if the data structures and other components that use these data structures
apart from the API are analyzed. The data structure can be loaded by using the other
components and the API can be tested while the other component is accessing these
data structures. Verify that all other dependent components functionality are not
affected while the API accesses and manipulates the data structures

http://www.SofTReL.org

100 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

The availability of the source code to the testers would help in analyzing the various
inputs values that could be possible for testing the API. It would also help in
understanding the various paths which could be tested. Therefore, not only are testers
required to understand the calls, but also all the constants and data types used by the
interface.
3. Identify the combination of parameters: Parameter combinations are extremely
important for exercising stored data and computation. In API calls, two independently
valid values might cause a fault when used together which might not have occurred
with the other combinational values. Therefore, a routine called with two parameters
requires selection of values for one based on the value chosen for the other. Often the
response of a routine to certain data combinations is incorrectly programmed due to the
underlying complex logic.
The API needs to be tested taking into consideration the combination of different
parameter. The number of possible combinations of parameters for each call is typically
large. For a given set of parameters, if only the boundary values have been selected, the
number of combinations, while relatively diminished, may still be prohibitively large.
For example, consider an API which takes three parameters as input. The various
combinations of different values for the input values and their combinations needs to be
identified.
Parameter combination is further complicated by the function overloading capabilities
of many modern programming languages. It is important to isolate the differences
between such functions and take into account that their use is context driven. The APIs
can also be tested to check that there are no memory leaks after they are called. This
can be verified by continuously calling the API and observing the memory utilization.
4.Call Sequencing: When combinations of possible arguments to each individual call
are unmanageable, the number of possible call sequences is infinite. Parameter
selection and combination issues further complicate the problem call-sequencing
problem. Faults caused by improper call sequences tend to give rise to some of the most
dangerous problems in software. Most security vulnerabilities are caused by the
execution of some such seemingly improbable sequences.
5.Observe the output: The outcome of an execution of an API depends upon the
behavior of that API, the test condition and the environment. The outcome of an API can
http://www.SofTReL.org

101 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

be at different ways i.e., some could generally return certain data or status but for some
of the API's, it might not return or shall be just waiting for a period of time, triggering
another event, modifying certain resource and so on.
The tester should be aware of the output that needs to be expected for the API under
test. The outputs returned for various input values like valid/invalid, boundary values
etc needs to be observed and analyzed to validate if they are as per the functionality. All
the error codes returned and exceptions returned for all the input combinations should
be evaluated.
API Testing Tools: There are many testing tools available. Depending on the level of
testing required, different tools could be used. Some of the API testing tools available
are mentioned here.
JVerify: This is from Man Machine Systems.
JVerify is a Java class/API testing tool that supports a unique invasive testing model.
The invasive model allows access to the internals (private elements) of any Java object
from within a test script. The ability to invade class internals facilitates more effective
testing at class level, since controllability and observability are enhanced. This can be
very valuable when a class has not been designed for testability.
JavaSpec: JavaSpec is a SunTest's API testing tool. It can be used to test Java
applications and libraries through their API. JavaSpec guides the users through the
entire test creation process and lets them focus on the most critical aspects of testing.
Once the user has entered the test data and assertions, JavaSpec automatically
generates self-checking tests, HTML test documentation, and detailed test reports.
Here is an example of how to automate the API testing.
Assumptions: 1. Test engineer is supposed to test some API.
2. The APIs are available in form of library (.lib).
3. Test engineer has the API document.
There are mainly two things to test in API testing: 1. Black box testing of the APIs
2. Interaction / integration testing of the APIs.
By black box testing of the API mean that we have to test the API for outputs. In simple
words when we give a known input (parameters to the API) then we also know the ideal
output. So we have to check for the actual out put against the idle output.

http://www.SofTReL.org

102 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

For this we can write a simple c program that will do the following: a) Take the parameters from a text file (this file will contain many of such
input parameters).
b) Call the API with these parameters.

c) Match the actual and idle output and also check the parameters for good
values that are passed with reference (pointers).
d) Log the result.
Secondly we have test the integration of the APIs.
For example there are two APIs say
Handle h = handle createcontext (void);
When the handle to the device is to be closed then the corresponding function
Bool bishandledeleted = bool deletecontext (handle &h);
Here we have to call the two APIs and check if they are handled by the created
createcontext () and are deleted by the deletecontext ().
This will ensure that these two APIs are working fine.
For this we can write a simple c program that will do the following: a) Call the two APIs in the same order.
b) Pass the output parameter of the first as the input of the second
c) Check for the output parameter of the second API
d) Log the result.
The example is over simplified but this works because we are using this kind of test tool
for extensive regression testing of our API library.

17. Understanding Rapid Testing

Rapid testing is the testing software faster than usual, without compromising on the
standards of quality. It is the technique to test as thorough as reasonable within the
constraints. This technique looks at testing as a process of heuristic inquiry and
logically speaking it should be based on exploratory testing techniques.
Although most projects undergo continuous testing, it does not usually produce the
http://www.SofTReL.org

103 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

information required to deal with the situations where it is necessary to make an

instantaneous assessment of the product's quality at a particular moment. In most
cases the testing is scheduled for just prior to launch and conventional testing
techniques often cannot be applied to software that is incomplete or subject to constant
change. At times like these Rapid Testing can be used.
It can be said that rapid testing has a structure that is built on a foundation of four
components namely,

People

Integrated test process

Static Testing and

Dynamic Testing

There is a need for people who can handle the pressure of tight schedules. They need to
be productive contributors even through the early phases of the development life cycle.
According to James Bach, a core skill is the ability to think critically.
It should also be noted that dynamic testing lies at the heart of the software testing
process, and the planning, design, development, and execution of dynamic tests should
be performed well for any testing process to be efficient.
THE RAPID TESTING

PRACTICE

It would help us if we scrutinize each phase of a development process to see how the
efficiency, speed and quality of testing can be improved, bearing in mind the following
factors:

Actions that the test team can take to prevent defects from escaping. For
example, practices like extreme programming and exploratory testing.

Actions that the test team can take to manage risk to the development schedule.

The information that can be obtained from each phase so that the test team can
speed up the activities.

If a test process is designed around the answers to these questions, both the speed of
testing and the quality of the final product should be enhanced.
Some of the aspects that can be used while rapid testing are given below:
1. Test for link integrity
2. Test for disabled accessibility
3. Test the default settings
4. Check the navigations
http://www.SofTReL.org

104 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

5. Check for input constraints by injecting special characters

at the sources of

data
6. Run Multiple instances
7. Check for interdependencies and stress them
8. Test for consistency of design
9. Test for compatibility
10. Test for usability
11. Check for the possible variabilitys and attack them
12. Go for possible stress and load tests
13. And our favorite banging the keyboard

18. Test Ware Development

Test Ware development is the key role of the Testing Team. What comprises Test Ware
and some guidelines to build the test ware is discussed below:

18.1 Test Strategy

Before starting any testing activities, the team lead will have to think a lot & arrive at a
strategy. This will describe the approach, which is to be adopted for carrying out test
activities including the planning activities. This is a formal document and the very first
document regarding the testing area and is prepared at a very early stag in SDLC. This
document must provide generic test approach as well as specific details regarding the
project. The following areas are addressed in the test strategy document.
18.1.1 Test Levels
The test strategy must talk about what are the test levels that will be carried out for
that particular project. Unit, Integration & System testing will be carried out in all
projects. But many times, the integration & system testing may be combined. Details
like this may be addressed in this section.
18.1.2 Roles and Responsibilities
The roles and responsibilities of test leader, individual testers, project manager are to
be clearly defined at a project level in this section. This may not have names associated:
but the role has to be very clearly defined. The review and approval mechanism must be
stated here for test plans and other test documents. Also, we have to state who reviews
the test cases, test records and who approved them. The documents may go thru a
series of reviews or multiple approvals and they have to be mentioned here.

http://www.SofTReL.org

105 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

18.1.3 Testing Tools

Any testing tools, which are to be used in different test levels, must be, clearly
identified. This includes justifications for the tools being used in that particular level
also.
18.1.4 Risks and Mitigation
Any risks that will affect the testing process must be listed along with the mitigation. By
documenting the risks in this document, we can anticipate the occurrence of it well
ahead of time and then we can proactively prevent it from occurring. Sample risks are
dependency of completion of coding, which is done by sub-contractors, capability of
testing tools etc.
18.1.5 Regression Test Approach
When a particular problem is identified, the programs will be debugged and the fix will
be done to the program. To make sure that the fix works, the program will be tested
again for that criteria. Regression test will make sure that one fix does not create some
other problems in that program or in any other interface. So, a set of related test cases
may have to be repeated again, to make sure that nothing else is affected by a
particular fix. How this is going to be carried out must be elaborated in this section. In
some companies, whenever there is a fix in one unit, all unit test cases for that unit will
be repeated, to achieve a higher level of quality.
18.1.6 Test Groups
From the list of requirements, we can identify related areas, whose functionality is
similar. These areas are the test groups. For example, in a railway reservation system,
anything related to ticket booking is a functional group; anything related with report
generation is a functional group. Same way, we have to identify the test groups based
on the functionality aspect.
18.1.7 Test Priorities
Among test cases, we need to establish priorities. While testing software projects,
certain test cases will be treated as the most important ones and if they fail, the
product cannot be released. Some other test cases may be treated like cosmetic and if
they fail, we can release the product without much compromise on the functionality.
This priority levels must be clearly stated. These may be mapped to the test groups
also.

http://www.SofTReL.org

106 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

18.1.8 Test Status Collections and Reporting

When test cases are executed, the test leader and the project manager must know,
where exactly we stand in terms of testing activities. To know where we stand, the
inputs from the individual testers must come to the test leader. This will include, what
test cases are executed, how long it took, how many test cases passed and how manyfailed etc. Also, how often we collect the status is to be clearly mentioned. Some
companies will have a practice of collecting the status on a daily basis or weekly basis.
This has to be mentioned clearly.
18.1.9 Test Records Maintenance
When the test cases are executed, we need to keep track of the execution details like
when it is executed, who did it, how long it took, what is the result etc. This data must
be available to the test leader and the project manager, along with all the team
members, in a central location. This may be stored in a specific directory in a central
server and the document must say clearly about the locations and the directories. The
naming convention for the documents and files must also be mentioned.

18.1.10

Requirements Traceability Matrix

Ideally each software developed must satisfy the set of requirements completely. So,
right from design, each requirement must be addressed in every single document in the
software process. The documents include the HLD, LLD, source codes, unit test cases,
integration test cases and the system test cases. Refer the following sample table which
describes Requirements Traceability Matrix process. In this matrix, the rows will have
the requirements. For every document {HLD, LLD etc}, there will be a separate column.
So, in every cell, we need to state, what section in HLD addresses a particular
requirement. Ideally, if every requirement is addressed in every single document, all the
individual cells must have valid section ids or names filled in. Then we know that every
requirement is addressed. In case of any missing of requirement, we need to go back to
the document and correct it, so that it addressed the requirement.
For testing at each level, we may have to address the requirements. One integration and
the system test case may address multiple requirements.

DTP Scenario
http://www.SofTReL.org

DTC Id

Code

LLD Section
107 of 142

Software Testing Guide Book

Requirement
Requirement
Requirement
Requirement

Requirement

18.1.11

No
+ve/-ve
+ve/-ve
+ve/-ve
+ve/-ve

1,2,3,4
1,2,3,4
1,2,3,4
1,2,3,4

+ve/-ve
TESTER

1,2,3,4
TESTER

1
2
3
4

Part I: Fundamentals of Software Testing

DEVELOPER

TEST LEAD

Test Summary

The senior management may like to have test summary on a weekly or monthly basis. If
the project is very critical, they may need it on a daily basis also. This section must
address what kind of test summary reports will be produced for the senior management
along with the frequency.
The test strategy must give a clear vision of what the testing team will do for the whole
project for the entire duration. This document will/may be presented to the client also,
if needed. The person, who prepares this document, must be functionally strong in the
product domain, with a very good experience, as this is the document that is going to
drive the entire team for the testing activities. Test strategy must be clearly explained to
the testing team members tight at the beginning of the project.

18.2 Test Plan

The test strategy identifies multiple test levels, which are going to be performed for the
project. Activities at each level must be planned well in advance and it has to be
formally documented. Based on the individual plans only, the individual test levels are
carried out.
The plans are to be prepared by experienced people only. In all test plans, the ETVX
{Entry-Task-Validation-Exit} criteria are to be mentioned. Entry means the entry point
to that phase. For example, for unit testing, the coding must be complete and then only
one can start unit testing. Task is the activity that is performed. Validation is the way in
which the progress and correctness and compliance are verified for that phase. Exit

http://www.SofTReL.org

108 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

tells the completion criteria of that phase, after the validation is done. For example, the
exit criterion for unit testing is all unit test cases must pass.
ETVX is a modeling technique for developing worldly and atomic level models. It sands
for Entry, Task, Verification and Exit. It is a task-based model where the details of each
task are explicitly defined in a specification table against each phase i.e. Entry, Exit,
Task, Feedback In, Feedback Out, and measures.
There are two types of cells, unit cells and implementation cells. The implementation
cells are basically unit cells containing the further tasks.
For example if there is a task of size estimation, then there will be a unit cell of size
estimation. Then since this task has further tasks namely, define measures, estimate
size. The unit cell containing these further tasks will be referred to as the
implementation cell and a separate table will be constructed for it.
A purpose is also stated and the viewer of the model may also be defined e.g. top
management or customer.
18.2.1 Unit Test Plan {UTP}
The unit test plan is the overall plan to carry out the unit test activities. The lead tester
prepares it and it will be distributed to the individual testers, which contains the
following sections.
18.2.1.1

What is to be tested?

The unit test plan must clearly specify the scope of unit testing. In this, normally the
basic input/output of the units along with their basic functionality will be tested. In
this case mostly the input units will be tested for the format, alignment, accuracy and
the totals. The UTP will clearly give the rules of what data types are present in the
system, their format and their boundary conditions. This list may not be exhaustive;
but it is better to have a complete list of these details.
18.2.1.2Sequence of Testing
The sequences of test activities that are to be carried out in this phase are to be listed in
this section. This includes, whether to execute positive test cases first or negative test
cases first, to execute test cases based on the priority, to execute test cases based on
test groups etc. Positive test cases prove that the system performs what is supposed to
do; negative test cases prove that the system does not perform what is not supposed to
do. Testing the screens, files, database etc., are to be given in proper sequence.

http://www.SofTReL.org

109 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

18.2.1.4 Basic Functionality of Units

How the independent functionalities of the units are tested which excludes any
communication between the unit and other units. The interface part is out of scope of
this test level. Apart from the above sections, the following sections are addressed, very
specific to unit testing.

Unit Testing Tools

Priority of Program units

Naming convention for test cases

Status reporting mechanism

Regression test approach

ETVX criteria

18.2.2 Integration Test Plan

The integration test plan is the overall plan for carrying out the activities in the
integration test level, which contains the following sections.
2.2.1

What is to be tested?

This section clearly specifies the kinds of interfaces fall under the scope of testing
internal, external interfaces, with request and response is to be explained. This need
not go deep in terms of technical details but the general approach how the interfaces
are triggered is explained.
18.2.2.1Sequence of Integration
When there are multiple modules present in an application, the sequence in which they
are to be integrated will be specified in this section. In this, the dependencies between
the modules play a vital role. If a unit B has to be executed, it may need the data that is
fed by unit A and unit X. In this case, the units A and X have to be integrated and then
using that data, the unit B has to be tested. This has to be stated to the whole set of
units in the program. Given this correctly, the testing activities will lead to the product,
slowly building the product, unit by unit and then integrating them.
18.2.2.2

List of Modules and Interface Functions

There may be N number of units in the application, but the units that are going to
communicate with each other, alone are tested in this phase. If the units are designed
in such a way that they are mutually independent, then the interfaces do not come into
picture. This is almost impossible in any system, as the units have to communicate to
other units, in order to get different types of functionalities executed. In this section, we
http://www.SofTReL.org

110 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

need to list the units and for what purpose it talks to the others need to be mentioned.
This will not go into technical aspects, but at a higher level, this has to be explained in
plain English.
Apart from the above sections, the following sections are addressed, very specific to
integration testing.

Integration Testing Tools

Priority of Program interfaces

Naming convention for test cases

Status reporting mechanism

Regression test approach

ETVX criteria

Build/Refresh criteria {When multiple programs or objects are to be linked to

arrived at single product, and one unit has some modifications, then it may
need to rebuild the entire product and then load it into the integration test
environment. When and how often, the product is rebuilt and refreshed is to be
mentioned}.

18.2.3 System Test Plan {STP}

The system test plan is the overall plan carrying out the system test level activities. In
the system test, apart from testing the functional aspects of the system, there are some
special testing activities carried out, such as stress testing etc. The following are the
sections normally present in system test plan.
18.2.3.1What is to be tested?
This section defines the scope of system testing, very specific to the project. Normally,
the system testing is based on the requirements. All requirements are to be verified in
the scope of system testing. This covers the functionality of the product. Apart from this
what special testing is performed are also stated here.
18.2.3.2 Functional Groups and the Sequence
The requirements can be grouped in terms of the functionality. Based on this, there
may be priorities also among the functional groups. For example, in a banking
application, anything related to customer accounts can be grouped into one area,
anything related to inter-branch transactions may be grouped into one area etc. Same
way for the product being tested, these areas are to be mentioned here and the
http://www.SofTReL.org

111 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

suggested sequences of testing of these areas, based on the priorities are to be

described.
18.2.3.3Special Testing Methods
This covers the different special tests like load/volume testing, stress testing,
interoperability testing etc. These testing are to be done based on the nature of the
product and it is not mandatory that every one of these special tests must be performed
for every product.
Apart from the above sections, the following sections are addressed, very specific to
system testing.

System Testing Tools

Priority of functional groups

Naming convention for test cases

Status reporting mechanism

Regression test approach

ETVX criteria

Build/Refresh criteria

18.2.4 Acceptance Test Plan {ATP}

The client at their place performs the acceptance testing. It will be very similar to the
system test performed by the Software Development Unit. Since the client is the one
who decides the format and testing methods as part of acceptance testing, there is no
specific clue on the way they will carry out the testing. But it will not differ much from
the system testing. Assume that all the rules, which are applicable to system test, can
be implemented to acceptance testing also.
Since this is just one level of testing done by the client for the overall product, it may
include test cases including the unit and integration test level details.
A sample Test Plan Outline along with their description is as shown below:
Test Plan Outline
1. BACKGROUND This item summarizes the functions of the application system
and the tests to be performed.
2. INTRODUCTION
http://www.SofTReL.org

112 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

3. ASSUMPTIONS Indicates any anticipated assumptions which will be made

while testing the application.
4. TEST ITEMS - List each of the items (programs) to be tested.
5. FEATURES TO BE TESTED - List each of the features (functions or
requirements) which will be tested or demonstrated by the test.
6. FEATURES NOT TO BE TESTED - Explicitly lists each feature, function, or
requirement which won't be tested and why not.
7. APPROACH - Describe the data flows and test philosophy.
Simulation or Live execution, Etc. This section also mentions all the approaches
which will be followed at the various stages of the test execution.
8. ITEM PASS/FAIL CRITERIA Blanket statement - Itemized list of expected output
and tolerances
9. SUSPENSION/RESUMPTION CRITERIA - Must the test run from start to
completion?
Under what circumstances it may be resumed in the middle?
Establish check-points in long tests.
10. TEST DELIVERABLES - What, besides software, will be delivered?
Test report
Test software
11. TESTING TASKS Functional tasks (e.g., equipment set up)
Administrative tasks
12. ENVIRONMENTAL NEEDS
Security clearance
Office space & equipment
Hardware/software requirements
13. RESPONSIBILITIES
Who does the tasks in Section 10?
What does the user do?
14. STAFFING & TRAINING
15. SCHEDULE
http://www.SofTReL.org

113 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

16. RESOURCES
17. RISKS & CONTINGENCIES
18. APPROVALS
The schedule details of the various test pass such as Unit tests, Integration tests,
System Tests should be clearly mentioned along with the estimated efforts.

18.3 Test Case Documents

Designing good test cases is a complex art. The complexity comes from three
sources:
Test cases help us discover information. Different types of tests
are more effective for different classes of information.
Test cases can be good in a variety of ways. No test case will be
good in all of them.
People tend to create test cases according to certain testing styles,
such as domain testing or risk-based testing. Good domain tests
are different from good risk-based tests.
Whats a test case?
A test case specifies the pretest state of the IUT and its environment, the test
inputs or conditions, and the expected result. The expected result specifies what
the IUT should produce from the test inputs. This specification includes
messages generated by the IUT, exceptions, returned values, and resultant state
of the IUT and its environment. Test cases may also specify initial and resulting
conditions for other objects that constitute the IUT and its environment.
Whats a scenario?
A scenario is a hypothetical story, used to help a person think through a complex
problem or system.
Characteristics of Good Scenarios
A scenario test has five key characteristics. It is (a) a story that is (b) motivating, (c)
credible, (d) complex, and (e) easy to evaluate.
The primary objective of test case design is to derive a set of tests that have the highest
attitude of discovering defects in the software. Test cases are designed based on the

http://www.SofTReL.org

114 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

analysis of requirements, use cases, and technical specifications, and they should be
developed in parallel with the software development effort.
A test case describes a set of actions to be performed and the results that are expected.
A test case should target specific functionality or aim to exercise a valid path through a
use case. This should include invalid user actions and illegal inputs that are not
necessarily listed in the use case. A test case is described depends on several factors,
e.g. the number of test cases, the frequency with which they change, the level of
automation employed, the skill of the testers, the selected testing methodology, staff
turnover, and risk.
The test cases will have a generic format as below.
Test case ID - The test case id must be unique across the application
Test case description - The test case description must be very brief.
Test prerequisite - The test pre-requisite clearly describes what should be present in
the system, before the test can be executes.
Test Inputs - The test input is nothing but the test data that is prepared to be fed to
the system.
Test steps - The test steps are the step-by-step instructions on how to carry out the
test.
Expected Results - The expected results are the ones that say what the system must
give as output or how the system must react based on the test steps.
Actual Results The actual results are the ones that say outputs of the action for the
given inputs or how the system reacts for the given inputs.
Pass/Fail - If the Expected and Actual results are same then test is Pass otherwise Fail.
The test cases are classified into positive and negative test cases. Positive test cases are
designed to prove that the system accepts the valid inputs and then process them
correctly. Suitable techniques to design the positive test cases are Specification derived
tests, Equivalence partitioning and State-transition testing. The negative test cases are
designed to prove that the system rejects invalid inputs and does not process them.
Suitable techniques to design the negative test cases are Error guessing, Boundary
value analysis, internal boundary value testing and State-transition testing. The test
cases details must be very clearly specified, so that a new person can go through the
test cases step and step and is able to execute it. The test cases will be explained with
specific examples in the following section.
http://www.SofTReL.org

115 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

For example consider online shopping application. At the user interface level the client
request the web server to display the product details by giving email id and Username.
The web server processes the request and will give the response. For this application we
will design the unit, Integration and system test cases.

Figure 6.Web based application

Unit Test Cases (UTC)
These are very specific to a particular unit. The basic functionality of the unit is to be
understood based on the requirements and the design documents. Generally, Design
document will provide a lot of information about the functionality of a unit. The Design
document has to be referred before UTC is written, because it provides the actual
functionality of how the system must behave, for given inputs.
For example, In the Online shopping application, If the user enters valid Email id and
Username values, let us assume that Design document says, that the system must
display a product details and should insert the Email id and Username in database
table. If user enters invalid values the system will display appropriate error message
and will not store it in database.

Figure 7: Snapshot of Login Screen

Test Conditions for the fields in the Login screen
Email-It should be in this format (For Eg [email protected]).
Username It should accept only alphabets not greater than 6.Numerics and special
type of characters are not allowed.
http://www.SofTReL.org

116 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Test Prerequisite: The user should have access to Customer Login screen form screen
Negative Test Case
Project Name-Online shopping
Version-1.1
Module-Catalog
T

Description

Test Inputs

Expected Results

est
#
1

Check for inputting

Email=keerthi@redif

Inputs should not

values

fmail

be

in

Email

field

Username=Xavier

accepted.

should

valid Email
Inputs should not

values

mail.com

be

Username=John

should

field

accepted.

Check for inputting

Email=shilpa@yahoo

values in Username

.com

field

Username=Mark24

It

display

message
3

il

Enter

Email=john26#rediff

Email

results

It

Check for inputting

in

Pass/Fa

display

message
2

Actual

Enter

valid Email
Inputs should not
be

accepted.

should

It

display

message

Enter

correct Username
Positive Test Case
Test
#
1

Description

Test Inputs

Expected

Actual
results

[email protected]

Results
Inputs

inputting values in

Username=dave

should

Email field
Check

[email protected]

accepted.
Inputs

inputting values in

should

Email field

Username=john

accepted.

[email protected]

Inputs

Username=mark

should

Check

Check

for

for

for

inputting values in
Username field
http://www.SofTReL.org

be

be

be

accepted.
117 of 142

Pass/Fail

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Integration Test Cases

Before designing the integration test cases the testers should go through the Integration
test plan. It will give complete idea of how to write integration test cases. The main aim
of integration test cases is that it tests the multiple modules together. By executing
these test cases the user can find out the errors in the interfaces between the Modules.
For example, in online shopping, there will be Catalog and Administration module. In
catalog section the customer can track the list of products and can buy the products
online. In administration module the admin can enter the product name and
information related to it.

Table3: Integration Test Cases

Test

Description

Test Inputs

#
1

Check for Login

Enter

Screen

and UserName.

values

in

Email

Expected

Actual

Results
Inputs
should

results

be accepted.

For Eg:
Email
[email protected]
Backend

Username=shilpa
Select email, username

The

Verification

from Cus;

Email

entered
and

Username

Check

for

Product
Information

should

be

displayed

at

Click product information

sqlprompt.
It
should

link

display
complete details
of the product

http://www.SofTReL.org

118 of 142

Pass/Fail

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Check for admin

Enter values in Product

Inputs

screen

Id

be accepted.

and

Product

name

should

fields.
For Eg:
Product Id-245
Product

name-Norton

Backend

Antivirus
Select pid , pname from

The

verification

Product;

Product id and
Product

entered
name

should

be

displayed at the
sql prompt.
NOTE: The tester has to execute above unit and Integration test cases after
coding. And He/She has to fill the actual results and Pass/fail columns. If the test
cases fail then defect report should be prepared.

System Test Cases: The system test cases meant to test the system as per the requirements; end-to end.
This is basically to make sure that the application works as per SRS. In system test
cases, (generally in system testing itself), the testers are supposed to act as an end
user. So, system test cases normally do concentrate on the functionality of the system,
inputs are fed through the system and each and every check is performed using the
system itself. Normally, the verifications done by checking the database tables directly
or running programs manually are not encouraged in the system test.
The system test must focus on functional groups, rather than identifying the program
units. When it comes to system testing, it is assume that the interfaces between the
modules are working fine (integration passed).
Ideally the test cases are nothing but a union of the functionalities tested in the unit
testing and the integration testing. Instead of testing the system inputs outputs through
database or external programs, everything is tested through the system itself. For
example, in a online shopping application, the catalog and administration screens
(program units) would have been independently unit tested and the test results would
be verified through the database. In system testing, the tester will mimic as an end user
and hence checks the application through its output.
http://www.SofTReL.org

119 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

There are occasions, where some/many of the integration and unit test cases are
repeated in system testing also; especially when the units are tested with test stubs
before and not actually tested with other real modules, during system testing those
cases will be performed again with real modules/data in

19. Defect Management

Defects determine the effectiveness of the Testing what we do. If there are no defects, it
directly implies that we dont have our job. There are two points worth considering here,
either the developer is so strong that there are no defects arising out, or the test
engineer is weak. In many situations, the second is proving correct. This implies that
we lack the knack. In this section, let us understand Defects.

19.1 What is a Defect?

For a test engineer, a defect is following:

Any deviation from specification

Anything that causes user dissatisfaction

Incorrect output

Software does not do what it intended to do.

Bug / Defect / Error: -

Software is said to have bug if it features deviates from specifications.

Software is said to have defect if it has unwanted side effects.

Software is said to have Error if it gives incorrect output.

But as for a test engineer all are same as the above definition is only for the purpose of
documentation or indicative.

19.2 Defect Taxonomies

Categories of Defects:
All software defects can be broadly categorized into the below mentioned types:

Errors of commission: something wrong is done

Errors of omission: something left out by accident

Errors of clarity and ambiguity: different interpretations

Errors of speed and capacity

However, the above is a broad categorization; below we have for you a host of varied
types of defects that can be identified in different software applications:
http://www.SofTReL.org

120 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

1. Conceptual bugs / Design bugs

2. Coding bugs
3. Integration bugs
4. User Interface Errors
5. Functionality
6. Communication
7. Command Structure
8. Missing Commands
9. Performance
10. Output
11. Error Handling Errors
12. Boundary-Related Errors
13. Calculation Errors
14. Initial and Later States
15. Control Flow Errors
16. Errors in Handling Data
17. Race Conditions Errors
18.

Load Conditions Errors

19.

Hardware Errors

20.

Source and Version Control Errors

21.

Documentation Errors

22.

Testing Errors

19.3 Life Cycle of a Defect

The following self explanatory figure explains the life cycle of a defect:
Defer

Submit Defect

Update Defect

http://www.SofTReL.org

Assign

Fix/Change

Review, Verify
and Qualify

Validate

Duplicate,
Reject or More
Info

Close

121 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Cancel

20. Metrics for Testing

What is a Metric?
Metric is a measure to quantify software, software development resources, and/or the
software development process. A Metric can quantify any of the following factors:

Schedule,

Work Effort,

Product Size,

Project Status, and

Quality Performance

Measuring enables.
Metrics enables estimation of future work.
That is, considering the case of testing - Deciding the product is fit for shipment or
delivery depends on the rate the defects are found and fixed. Defect collected and fixed
is one kind of metric. (www.processimpact.com)
As defined in the MISRA Report,
It is beneficial to classify metrics according to their usage. IEEE 928.1 [4] identifies two
classes:
i)

Process Activities performed in the production of the Software

ii)

Product An output of the Process, for example the software or

its documentation.

Defects are analyzed to identify which are the major causes of defect and which is the
phase that introduces most defects. This can be achieved by performing Pareto analysis
of defect causes and defect introduction phases. The main requirements for any of these
analysis is Software Defect Metrics.
Few of the Defect Metrics are:
Defect Density: (No. Of Defects Reported by SQA + No. Defects Reported By Peer
Review)/Actual Size.
The Size can be in KLOC, SLOC, or Function Points. The method used in the
Organization to measure the size of the Software Product.
The SQA is considered to be the part of the Software testing team.
http://www.SofTReL.org

122 of 142

Software Testing Guide Book

Test effectiveness:

Part I: Fundamentals of Software Testing

t / (t+Uat) where t=total no. of defects reported during testing

and Uat = total no. of defects reported during User acceptance testing
User Acceptance Testing is generally carried out using the Acceptance Test Criteria
according to the Acceptance Test Plan.
Defect Removal Efficiency:
(Total No Of Defects Removed /Total No. Of Defects Injected)*100 at various stages of
SDLC
Description
This metric will indicate the effectiveness of the defect identification and removal in
stages for a given project
Formula

Requirements: DRE = [(Requirement defects corrected during Requirements

phase) / (Requirement defects injected during Requirements phase)] * 100

Design: DRE = [(Design defects corrected during Design phase) / (Defects

identified during Requirements phase + Defects injected during Design
phase)] * 100

Code: DRE = [(Code defects corrected during Coding phase) / (Defects

identified during Requirements phase + Defects identified during Design
phase + Defects injected during coding phase)] * 100

Overall: DRE = [(Total defects corrected at all phases before delivery) / (Total
defects detected at all phases before and after delivery)] * 100

Metric Representation
Percentage
Calculated at
Stage completion or Project Completion
Calculated from
Bug Reports and Peer Review Reports
Defect Distribution:

Percentage of Total defects Distributed across Requirements

Analysis, Design Reviews, Code Reviews, Unit Tests, Integration Tests, System Tests,
User Acceptance Tests, Review by Project Leads and Project Managers.
Software Process Metrics are measures which provide information about the
performance of the development process itself.
Purpose:

http://www.SofTReL.org

123 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

1. Provide an Indicator to the Ultimate Quality of Software being

Produced
2. Assists to the Organization to improve its development process by
Highlighting areas of Inefficiency or error-prone areas of the process.
Software Product Metrics are measures of some attribute of the Software Product.
(Example, Source Code).
Purpose:
1. Used to assess the quality of the output
What are the most general metrics?
Requirements Management
Metrics Collected
1.

Requirements by state Accepted, Rejected, Postponed

2.

No. of baselined requirements

3.

Number of requirements modified after base lining

Derived Metrics
1.

Requirements Stability Index (RSI)

2.

Requirements to Design Traceability

Project Management
Metrics Collected
1. Planned No. of days

Derived Metrics
1. Schedule Variance

2. Actual No. of days

1. Estimated effort

1. Effort Variance

2. Actual Effort
1. Estimated Cost

1. Cost Variance

2. Actual Cost
1. Estimated Size

1. Size Variance

2. Actual Size
Testing & Review
Metrics Collected
1.

No. of defects found by Reviews

2.

No. of defects found by Testing

3.

No. of defects found by Client

4.

Total No. of defects found by Reviews

Derived Metrics
1. Overall Review Effectiveness (ORE)
2. Overall Test Effectiveness
Peer Reviews
Metrics Collected
http://www.SofTReL.org

124 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

1.

KLOC / FP per person hour (Language) for Preparation

2.

KLOC / FP per person hour (Language) for Review Meeting

3.

No. of pages / hour reviewed during preparation

4.

Average number of defects found by Reviewer during Preparation

5.

No. of pages / hour reviewed during Review Meeting

6.

Average number of defects found by Reviewer during Review Meeting

7.

Review Team Size Vs Defects

8.

Review speed Vs Defects

9.

Major defects found during Review Meeting

10. Defects Vs Review Effort

Derived Metrics
1. Review Effectiveness (Major)
2. Total number of defects found by reviews for a project
Other Metrics
Metrics Collected
1. No. of Requirements Designed
2. No. of Requirements not Designed
3. No. of Design elements matching Requirements
4. No. of Design elements not matching Requirements
5. No. of Requirements Tested
6. No. of Requirements not Tested
7. No. of Test Cases with matching Requirements
8. No. of Test Cases without matching Requirements
9. No. of Defects by Severity
10. No. of Defects by stage of - Origin, Detection, Removal
Derived Metrics
1. Defect Density
2. No. of Requirements Designed Vs not Designed
3. No. of Requirements Tested Vs not Tested
4. Defect Removal Efficiency (DRE)
Some Metrics Explained
Schedule Variance (SV)
Description
This metric gives the variation of actual schedule vs. the planned schedule. This is
calculated for each project stage wise
Formula
SV = [(Actual no. of days Planned no. of days) / Planned no. of days] * 100
http://www.SofTReL.org

125 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Metric Representation
Percentage
Calculated at
Stage completion
Calculated from
Software Project Plan for planned number of days for completing each stage and for
actual number of days taken to complete each stage
Defect Removal Efficiency (DRE)
Description
This metric will indicate the effectiveness of the defect identification and removal in
stages for a given project
Formula

Requirements: DRE = [(Requirement defects corrected during Requirements

phase) / (Requirement defects injected during Requirements phase)] * 100

Design: DRE = [(Design defects corrected during Design phase) / (Defects

identified during Requirements phase + Defects injected during Design
phase)] * 100

Code: DRE = [(Code defects corrected during Coding phase) / (Defects

identified during Requirements phase + Defects identified during Design
phase + Defects injected during coding phase)] * 100

Overall: DRE = [(Total defects corrected at all phases before delivery) / (Total
defects detected at all phases before and after delivery)] * 100

Metric Representation
Percentage
Calculated at
Stage completion or Project Completion
Calculated from
Bug Reports and Peer Review Reports
Overall Review Effectiveness
Description
This metric will indicate the effectiveness of the Review process in identifying the
defects for a given project
Formula

Overall Review Effectiveness: ORE = [(Number of defects found by reviews) /

(Total number of defects found by reviews + Number of defects found during
Testing + Number of defects found during post-delivery)] * 100

http://www.SofTReL.org

126 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Metric Representation

Percentage

Calculated at

Monthly

Stage completion or Project Completion

Calculated from

Peer reviews, Formal Reviews

Test Reports

Customer Identified Defects

Overall Test Effectiveness (OTE)

Description
This metric will indicate the effectiveness of the Testing process in identifying the
defects for a given project during the testing stage
Formula

Overall Test Effectiveness: OTE = [(Number of defects found during testing) /

(Total number of defects found during Testing + Number of defects found
during post delivery)] * 100

Metric Representation

Percentage

Calculated at

Monthly

Build completion or Project Completion

Calculated from

Test Reports

Customer Identified Defects

Effort Variance (EV)

Description
This metric gives the variation of actual effort vs. the estimated effort. This is
calculated for each project Stage wise
Formula

EV = [(Actual person hours Estimated person hours) / Estimated person

hours] * 100

Metric Representation

Percentage

Calculated at

Stage completion as identified in SPP

http://www.SofTReL.org

127 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Calculated from

Estimation sheets for estimated values in person hours, for each activity
within a given stage and Actual Worked Hours values in person hours.

Cost Variance (CV)

Description
This metric gives the variation of actual cost Vs the estimated cost. This is
calculated for each project Stage wise
Formula

CV = [(Actual Cost Estimated Cost) / Estimated Cost] * 100

Metric Representation

Percentage

Calculated at

Stage completion

Calculated from

Estimation sheets for estimated values in dollars or rupees, for each activity
within a given stage

Actual cost incurred

Size Variance
Description
This metric gives the variation of actual size Vs. the estimated size. This is
calculated for each project stage wise
Formula

Size Variance = [(Actual Size Estimated Size) / Estimated Size] * 100

Metric Representation

Percentage

Calculated at

Stage completion

Project Completion

Calculated from

Estimation sheets for estimated values in Function Points or KLOC

Actual size

Productivity on Review Preparation Technical

Description
http://www.SofTReL.org

128 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

This metric will indicate the effort spent on preparation for Review. Use this to
calculate for languages used in the Project
Formula
For every language (such as C, C++, Java, XSL, etc) used, calculate

(KLOC or FP ) / hour (* Language)

*Language C, C++, Java, XML, etc

Metric Representation

KLOC or FP per hour

Calculated at

Monthly

Build completion

Calculated from

Peer Review Report

Number of defects found per Review Meeting

Description
This metric will indicate the number of defects found during the Review Meeting
across various stages of the Project
Formula

Number of defects per Review Meeting

Metric Representation

Defects / Review Meeting

Calculated at

Monthly

Completion of Review

Calculated from

Peer Review Report

Peer Review Defect List

Review Team Efficiency (Review Team Size Vs Defects Trend)

Description
This metric will indicate the Review Team size and the defects trend. This will help
to determine the efficiency of the Review Team
Formula

Review Team Size to the Defects trend

Metric Representation

Ratio

Calculated at
http://www.SofTReL.org

129 of 142

Software Testing Guide Book

Monthly

Completion of Review

Part I: Fundamentals of Software Testing

Calculated from

Peer Review Report

Peer Review Defect List

Review Effectiveness
Description
This metric will indicate the effectiveness of the Review process
Formula
Review Effectiveness = [(Number of defects found by Reviews) / ((Total number of
defects found by reviews) + Testing)] * 100
Metric Representation

Percentage

Calculated at

Completion of Review or Completion of Testing stage

Calculated from

Peer Review Report

Peer Review Defect List

Bugs Reported by Testing

Total number of defects found by Reviews

Description
This metric will indicate the total number of defects identified by the Review
process. The defects are further categorized as High, Medium or Low
Formula
Total number of defects identified in the Project
Metric Representation

Defects per Stage

Calculated at

Completion of Reviews

Calculated from

Peer Review Report

Peer Review Defect List

Defects vs. Review effort Review Yield

Description

http://www.SofTReL.org

130 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

This metric will indicate the effort expended in each stage for reviews to the defects
found
Formula

Defects / Review effort

Metric Representation

Defects / Review effort

Calculated at

Completion of Reviews

Calculated from

Peer Review Report

Peer Review Defect List

Requirements Stability Index (RSI)

Description
This metric gives the stability factor of the requirements over a period of time, after
the requirements have been mutually agreed and baselined between Ivesia Solutions
and the Client
Formula

RSI = 100 * [ (Number of baselined requirements) (Number of changes in

requirements after the requirements are baselined) ] / (Number of baselined
requirements)

Metric Representation

Percentage

Calculated at

Stage completion and Project completion

Calculated from

Change Request

Software Requirements Specification

Change Requests by State

Description
This metric provides the analysis on state of the requirements
Formula

Number of accepted requirements

Number of rejected requirements

Number of postponed requirements

http://www.SofTReL.org

131 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Metric Representation

Number

Calculated at

Stage completion

Calculated from

Change Request

Software Requirements Specification

Requirements to Design Traceability

Description
This metric provides the analysis on the number of requirements designed to the
number of requirements that were not designed
Formula

Total Number of Requirements

Number of Requirements Designed

Number of Requirements not Designed

Metric Representation

Number

Calculated at

Stage completion

Calculated from

SRS

Detail Design

Design to Requirements Traceability

Description
This metric provides the analysis on the number of design elements matching
requirements to the number of design elements not matching requirements
Formula

Number of Design elements

Number of Design elements matching Requirements

Number of Design elements not matching Requirements

Metric Representation

Number

Calculated at

Stage completion

Calculated from

SRS

http://www.SofTReL.org

132 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Detail Design

Requirements to Test case Traceability

Description
This metric provides the analysis on the number of requirements tested Vs the
number of requirements not tested
Formula

Number of Requirements

Number of Requirements Tested

Number of Requirements not Tested

Metric Representation

Number

Calculated at

Stage completion

Calculated from

SRS

Detail Design

Test Case Specification

Test cases to Requirements traceability

Description
This metric provides the analysis on the number of test cases matching
requirements Vs the number of test cases not matching requirements
Formula

Number of Requirements

Number of Test cases with matching Requirements

Number of Test cases not matching Requirements

Metric Representation

Number

Calculated at

Stage completion

Calculated from

SRS

Test Case Specification

Number of defects in coding found during testing by severity

Description
This metric provides the analysis on the number of defects by the severity
Formula
http://www.SofTReL.org

133 of 142

Software Testing Guide Book

Number of Defects

Number of defects of low priority

Number of defects of medium priority

Number of defects of high priority

Part I: Fundamentals of Software Testing

Metric Representation

Number

Calculated at

Stage completion

Calculated from

Bug Report

Defects Stage of origin, detection, removal

Description
This metric provides the analysis on the number of defects by the stage of origin,
detection and removal.
Formula

Number of Defects

Stage of origin

Stage of detection

Stage of removal

Metric Representation

Number

Calculated at

Stage completion

Calculated from

Bug Report

Defect Density
Description
This metric provides the analysis on the number of defects to the size of the work
product
Formula
Defect Density = [Total no. of Defects / Size (FP / KLOC)] * 100
Metric Representation

Percentage

Calculated at

Stage completion

Calculated from
http://www.SofTReL.org

134 of 142

Software Testing Guide Book

Defects List

Bug Report

Part I: Fundamentals of Software Testing

How do you determine metrics for your application?

Objectives of Metrics are not only to measure but also understand the progress to
the Organizational Goal.
The Parameters for determining the Metrics for an application:

Duration

Complexity

Technology Constraints

Previous Experience in Same Technology

Business Domain

Clarity of the scope of the project

One interesting and useful approach to arrive at the suitable metrics is using the
Goal-Question-Metric Technique.
As evident from the name, the GQM model consists of three layers; a Goal, a Set of
Questions, and lastly a Set of Corresponding Metrics. It is thus a hierarchical
structure starting with a goal (specifying purpose of measurement, object to be
measured, issue to be measured, and viewpoint from which the measure is taken).
The goal is refined into several questions that usually break down the issue into its
major components. Each question is then refined into metrics, some of them
objective, some of them subjective. The same metric can be used in order to answer
different questions under the same goal. Several GQM models can also have
questions and metrics in common, making sure that, when the measure is actually
taken, the different viewpoints are taken into account correctly (i.e., the metric
might have different values when taken from different viewpoints).
In

order

to

give

an

example

Goal Purpose Issue Object View Point

of

application

of

the

model:

Improve the timeliness of Change Request

Processing from the Project Managers

Question

viewpoint
What is the current Change Request

Metric

Processing Speed?
Average Cycle Time
Standard Deviation

http://www.SofTReL.org

135 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

Question

% cases outside of the upper limit

Is the performance of the process

Metric

improving?
Current average cycle time
Baseline average cycle time
100
Subjective rating of manager's satisfaction

When do you determine Metrics?

When the requirements are understood in a high-level, at this stage, the team size,
project size must be known to an extent, in which the project is at a "defined" stage.

http://www.SofTReL.org

136 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

References

Effective Methods of Software Testing, William E Perry.

Software Engineering A Practitioners Approach, Roger Pressman.
An API Testing Method by Alan A Jorgensen and James A Whittaker.
API Testing Methodology by Anoop Kumar P, working for Novell Software
Development (I) Pvt Ltd., Bangalore.
Why is API Testing Different by Nikhil Nilakantan, Hewlett Packard and
Ibrahim K. El-Far, Florida Institute of Technology.
Test Strategy & Test Plan Preparation Training course attended @ SoftSmith
Designing Test Cases - Cem Kaner, J.D., Ph.D.
Scenario Testing - Cem Kaner, J.D., Ph.D.
Exploratory Testing Explained, v.1.3 4/16/03 by James Bach.
Exploring Exploratory Testing by Andy Tinkham and Cem Kaner.
Session-Based Test Management by Jonathan Bach (first published in Software
Testing and Quality Engineering magazine, 11/00).
Defect Driven Exploratory Testing (DDET) by Ananthalakshmi.
Software Engineering Body of Knowledge v1.0
(http://www.sei.cmu.edu/publications)
Unit Testing guidelines by Scott Highet (http://www.Stickyminds.com)
http://www.sasystems.com
http://www.softwareqatest.com
http://www.eng.mu.edu/corlissg/198.2001/KFN_ch11-tools.html
http://www.ics.uci.edu/~jrobbins/ics125w04/nonav/howto-reviews.html
IEEE SOFTWARE REVIEWS Std 1028-1997
http://www.agilemanifesto.org
http://www.processimpact.com
The Goal Question Metric Approach, Victor R. Basili1 Gianluigi Caldiera1 H.
Dieter Rombach2
http://www.webopedia.com

http://www.SofTReL.org

137 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

GNU Free Documentation License

Version 1.2, November 2002
Copyright (C) 2000,2001,2002 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
0. PREAMBLE
The purpose of this License is to make a manual, textbook, or other functional and
useful document "free" in the sense of freedom: to assure everyone the effective freedom
to copy and redistribute it, with or without modifying it, either commercially or
noncommercially. Secondarily, this License preserves for the author and publisher a
way to get credit for their work, while not being considered responsible for modifications
made by others.
This License is a kind of "copyleft", which means that derivative works of the document
must themselves be free in the same sense. It complements the GNU General Public
License, which is a copyleft license designed for free software.
We have designed this License in order to use it for manuals for free software, because
free software needs free documentation: a free program should come with manuals
providing the same freedoms that the software does. But this License is not limited to
software manuals; it can be used for any textual work, regardless of subject matter or
whether it is published as a printed book. We recommend this License principally for
works whose purpose is instruction or reference.
1. APPLICABILITY AND DEFINITIONS
This License applies to any manual or other work, in any medium, that contains a
notice placed by the copyright holder saying it can be distributed under the terms of
this License. Such a notice grants a world-wide, royalty-free license, unlimited in
duration, to use that work under the conditions stated herein. The "Document", below,
refers to any such manual or work. Any member of the public is a licensee, and is
addressed as "you". You accept the license if you copy, modify or distribute the work in
a way requiring permission under copyright law.
A "Modified Version" of the Document means any work containing the Document or a
portion of it, either copied verbatim, or with modifications and/or translated into
another language.
A "Secondary Section" is a named appendix or a front-matter section of the Document
that deals exclusively with the relationship of the publishers or authors of the
Document to the Document's overall subject (or to related matters) and contains
nothing that could fall directly within that overall subject. (Thus, if the Document is in
part a textbook of mathematics, a Secondary Section may not explain any
mathematics.) The relationship could be a matter of historical connection with the
subject or with related matters, or of legal, commercial, philosophical, ethical or
political position regarding them.
The "Invariant Sections" are certain Secondary Sections whose titles are designated, as
being those of Invariant Sections, in the notice that says that the Document is released
under this License. If a section does not fit the above definition of Secondary then it is
not allowed to be designated as Invariant. The Document may contain zero Invariant
Sections. If the Document does not identify any Invariant Sections then there are none.
The "Cover Texts" are certain short passages of text that are listed, as Front-Cover Texts
or Back-Cover Texts, in the notice that says that the Document is released under this
License. A Front-Cover Text may be at most 5 words, and a Back-Cover Text may be at
most 25 words.
A "Transparent" copy of the Document means a machine-readable copy, represented in
a format whose specification is available to the general public, that is suitable for
revising the document straightforwardly with generic text editors or (for images
composed of pixels) generic paint programs or (for drawings) some widely available
drawing editor, and that is suitable for input to text formatters or for automatic
http://www.SofTReL.org

138 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

translation to a variety of formats suitable for input to text formatters. A copy made in
an otherwise Transparent file format whose markup, or absence of markup, has been
arranged to thwart or discourage subsequent modification by readers is not
Transparent. An image format is not Transparent if used for any substantial amount of
text. A copy that is not "Transparent" is called "Opaque".
Examples of suitable formats for Transparent copies include plain ASCII without
markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly
available DTD, and standard-conforming simple HTML, PostScript or PDF designed for
human modification. Examples of transparent image formats include PNG, XCF and
JPG. Opaque formats include proprietary formats that can be read and edited only by
proprietary word processors, SGML or XML for which the DTD and/or processing tools
are not generally available, and the machine-generated HTML, PostScript or PDF
produced by some word processors for output purposes only.
The "Title Page" means, for a printed book, the title page itself, plus such following
pages as are needed to hold, legibly, the material this License requires to appear in the
title page. For works in formats which do not have any title page as such, "Title Page"
means the text near the most prominent appearance of the work's title, preceding the
beginning of the body of the text.
A section "Entitled XYZ" means a named subunit of the Document whose title either is
precisely XYZ or contains XYZ in parentheses following text that translates XYZ in
another language. (Here XYZ stands for a specific section name mentioned below, such
as "Acknowledgements", "Dedications", "Endorsements", or "History".) To "Preserve the
Title" of such a section when you modify the Document means that it remains a section
"Entitled XYZ" according to this definition.
The Document may include Warranty Disclaimers next to the notice which states that
this License applies to the Document. These Warranty Disclaimers are considered to be
included by reference in this License, but only as regards disclaiming warranties: any
other implication that these Warranty Disclaimers may have is void and has no effect
on the meaning of this License.
2. VERBATIM COPYING
You may copy and distribute the Document in any medium, either commercially or
noncommercially, provided that this License, the copyright notices, and the license
notice saying this License applies to the Document are reproduced in all copies, and
that you add no other conditions whatsoever to those of this License. You may not use
technical measures to obstruct or control the reading or further copying of the copies
you make or distribute. However, you may accept compensation in exchange for copies.
If you distribute a large enough number of copies you must also follow the conditions in
section 3.
You may also lend copies, under the same conditions stated above, and you may
publicly display copies.
3. COPYING IN QUANTITY
If you publish printed copies (or copies in media that commonly have printed covers) of
the Document, numbering more than 100, and the Document's license notice requires
Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all
these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on the
back cover. Both covers must also clearly and legibly identify you as the publisher of
these copies. The front cover must present the full title with all words of the title equally
prominent and visible. You may add other material on the covers in addition. Copying
with changes limited to the covers, as long as they preserve the title of the Document
and satisfy these conditions, can be treated as verbatim copying in other respects.
If the required texts for either cover are too voluminous to fit legibly, you should put the
first ones listed (as many as fit reasonably) on the actual cover, and continue the rest
onto adjacent pages.
If you publish or distribute Opaque copies of the Document numbering more than 100,
you must either include a machine-readable Transparent copy along with each Opaque
copy, or state in or with each Opaque copy a computer-network location from which the
http://www.SofTReL.org

139 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

general network-using public has access to download using public-standard network

protocols a complete Transparent copy of the Document, free of added material. If you
use the latter option, you must take reasonably prudent steps, when you begin
distribution of Opaque copies in quantity, to ensure that this Transparent copy will
remain thus accessible at the stated location until at least one year after the last time
you distribute an Opaque copy (directly or through your agents or retailers) of that
edition to the public.
It is requested, but not required, that you contact the authors of the Document well
before redistributing any large number of copies, to give them a chance to provide you
with an updated version of the Document.
4. MODIFICATIONS
You may copy and distribute a Modified Version of the Document under the conditions
of sections 2 and 3 above, provided that you release the Modified Version under
precisely this License, with the Modified Version filling the role of the Document, thus
licensing distribution and modification of the Modified Version to whoever possesses a
copy of it. In addition, you must do these things in the Modified Version:
A. Use in the Title Page (and on the covers, if any) a title distinct from that of the
Document, and from those of previous versions (which should, if there were any,
be listed in the History section of the Document). You may use the same title as
a previous version if the original publisher of that version gives permission.
B. List on the Title Page, as authors, one or more persons or entities responsible
for authorship of the modifications in the Modified Version, together with at
least five of the principal authors of the Document (all of its principal authors, if
it has fewer than five), unless they release you from this requirement.
C. State on the Title page the name of the publisher of the Modified Version, as
the publisher.
D. Preserve all the copyright notices of the Document.

E. Add an appropriate copyright notice for your modifications adjacent to the

other copyright notices.
F. Include, immediately after the copyright notices, a license notice giving the
public permission to use the Modified Version under the terms of this License,
in the form shown in the Addendum below.
G. Preserve in that license notice the full lists of Invariant Sections and required
Cover Texts given in the Document's license notice.
H. Include an unaltered copy of this License.
I. Preserve the section Entitled "History", Preserve its Title, and add to it an item
stating at least the title, year, new authors, and publisher of the Modified
Version as given on the Title Page. If there is no section Entitled "History" in the
Document, create one stating the title, year, authors, and publisher of the
Document as given on its Title Page, then add an item describing the Modified
Version as stated in the previous sentence.
J. Preserve the network location, if any, given in the Document for public access
to a Transparent copy of the Document, and likewise the network locations given
in the Document for previous versions it was based on. These may be placed in
the "History" section. You may omit a network location for a work that was
published at least four years before the Document itself, or if the original
publisher of the version it refers to gives permission.
K. For any section Entitled "Acknowledgements" or "Dedications", Preserve the
Title of the section, and preserve in the section all the substance and tone of
each of the contributor acknowledgements and/or dedications given therein.

http://www.SofTReL.org

140 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

L. Preserve all the Invariant Sections of the Document, unaltered in their text
and in their titles. Section numbers or the equivalent are not considered part of
the section titles.
M. Delete any section Entitled "Endorsements". Such a section may not be
included in the Modified Version.
N. Do not retitle any existing section to be Entitled "Endorsements" or to conflict
in title with any Invariant Section.
O. Preserve any Warranty Disclaimers.
If the Modified Version includes new front-matter sections or appendices that qualify as
Secondary Sections and contain no material copied from the Document, you may at
your option designate some or all of these sections as invariant. To do this, add their
titles to the list of Invariant Sections in the Modified Version's license notice. These
titles must be distinct from any other section titles.
You may add a section Entitled "Endorsements", provided it contains nothing but
endorsements of your Modified Version by various parties--for example, statements of
peer review or that the text has been approved by an organization as the authoritative
definition of a standard.
You may add a passage of up to five words as a Front-Cover Text, and a passage of up
to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified
Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be
added by (or through arrangements made by) any one entity. If the Document already
includes a cover text for the same cover, previously added by you or by arrangement
made by the same entity you are acting on behalf of, you may not add another; but you
may replace the old one, on explicit permission from the previous publisher that added
the old one.
The author(s) and publisher(s) of the Document do not by this License give permission
to use their names for publicity for or to assert or imply endorsement of any Modified
Version.
5. COMBINING DOCUMENTS
You may combine the Document with other documents released under this License,
under the terms defined in section 4 above for modified versions, provided that you
include in the combination all of the Invariant Sections of all of the original documents,
unmodified, and list them all as Invariant Sections of your combined work in its license
notice, and that you preserve all their Warranty Disclaimers.
The combined work need only contain one copy of this License, and multiple identical
Invariant Sections may be replaced with a single copy. If there are multiple Invariant
Sections with the same name but different contents, make the title of each such section
unique by adding at the end of it, in parentheses, the name of the original author or
publisher of that section if known, or else a unique number. Make the same adjustment
to the section titles in the list of Invariant Sections in the license notice of the combined
work.
In the combination, you must combine any sections Entitled "History" in the various
original documents, forming one section Entitled "History"; likewise combine any
sections Entitled "Acknowledgements", and any sections Entitled "Dedications". You
must delete all sections Entitled "Endorsements."
6. COLLECTIONS OF DOCUMENTS
You may make a collection consisting of the Document and other documents released
under this License, and replace the individual copies of this License in the various
documents with a single copy that is included in the collection, provided that you follow
the rules of this License for verbatim copying of each of the documents in all other
respects.
You may extract a single document from such a collection, and distribute it individually
under this License, provided you insert a copy of this License into the extracted
http://www.SofTReL.org

141 of 142

Software Testing Guide Book

Part I: Fundamentals of Software Testing

document, and follow this License in all other respects regarding verbatim copying of
that document.
7. AGGREGATION WITH INDEPENDENT WORKS
A compilation of the Document or its derivatives with other separate and independent
documents or works, in or on a volume of a storage or distribution medium, is called an
"aggregate" if the copyright resulting from the compilation is not used to limit the legal
rights of the compilation's users beyond what the individual works permit. When the
Document is included in an aggregate, this License does not apply to the other works in
the aggregate which are not themselves derivative works of the Document.
If the Cover Text requirement of section 3 is applicable to these copies of the Document,
then if the Document is less than one half of the entire aggregate, the Document's Cover
Texts may be placed on covers that bracket the Document within the aggregate, or the
electronic equivalent of covers if the Document is in electronic form. Otherwise they
must appear on printed covers that bracket the whole aggregate.
8. TRANSLATION
Translation is considered a kind of modification, so you may distribute translations of
the Document under the terms of section 4. Replacing Invariant Sections with
translations requires special permission from their copyright holders, but you may
include translations of some or all Invariant Sections in addition to the original versions
of these Invariant Sections. You may include a translation of this License, and all the
license notices in the Document, and any Warranty Disclaimers, provided that you also
include the original English version of this License and the original versions of those
notices and disclaimers. In case of a disagreement between the translation and the
original version of this License or a notice or disclaimer, the original version will prevail.
If a section in the Document is Entitled "Acknowledgements", "Dedications", or
"History", the requirement (section 4) to Preserve its Title (section 1) will typically
require changing the actual title.
9. TERMINATION
You may not copy, modify, sublicense, or distribute the Document except as expressly
provided for under this License. Any other attempt to copy, modify, sublicense or
distribute the Document is void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights, from you under this
License will not have their licenses terminated so long as such parties remain in full
compliance.
10. FUTURE REVISIONS OF THIS LICENSE
The Free Software Foundation may publish new, revised versions of the GNU Free
Documentation License from time to time. Such new versions will be similar in spirit to
the present version, but may differ in detail to address new problems or concerns. See
http://www.gnu.org/copyleft/.
Each version of the License is given a distinguishing version number. If the Document
specifies that a particular numbered version of this License "or any later version"
applies to it, you have the option of following the terms and conditions either of that
specified version or of any later version that has been published (not as a draft) by the
Free Software Foundation. If the Document does not specify a version number of this
License, you may choose any version ever published (not as a draft) by the Free
Software Foundation.

http://www.SofTReL.org

142 of 142