Scribd
Upload
32 views5 pages

Assignment Analog 3

This document discusses four types of operational amplifier circuits: 1) A non-inverting amplifier that uses the full input impedance of the op-amp for instrumentation and avoids using an extra amplifier. 2) A summing amplifier whose inputs and feedback currents add up to zero and can be used as an audio mixer. 3) An integrator used for integrating signals. 4) A differentiator used for differentiating signals but is limited to a range of frequencies.

Uploaded by

Khairy Yaakob
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
32 views5 pages

Assignment Analog 3

This document discusses four types of operational amplifier circuits: 1) A non-inverting amplifier that uses the full input impedance of the op-amp for instrumentation and avoids using an extra amplifier. 2) A summing amplifier whose inputs and feedback currents add up to zero and can be used as an audio mixer. 3) An integrator used for integrating signals. 4) A differentiator used for differentiating signals but is limited to a range of frequencies.

Uploaded by

Khairy Yaakob
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

ASSIGNMENT ANALOG

3
OPERATIONAL
AMPLIFIER

MOHAMMAD KHAIRY BIN YAAKOB


HA12004
LECTURER: EN. ZUL

NON-INVERTING AMPLIFIER

This circuit is very useful when you need to use the full input impedance of the op-amp, such as in
instrumentation. (Of course, you can obtain a non-inverting amplifier by connecting two inverting
amplifiers in series, but that uses on additional amplifier.)

SUMMING AMPLIFIER

This amplifier's operation can be "summed up" by this equation, indicating that the input and feedback
currents must add up to zero (no current enters the operational amplifier's input terminals), which has
the form of a series of "n" inverting amplifiers, whose outputs are summed together.
The summing amplifier is often used as an audio mixer, where the inputs are voltages from several
microphones or other sources.

INTEGRATOR

Use for intergrating signal.

DIFFERENTIATOR

Use for differentiate signal. Limited to a range of frequency.

You might also like