0% found this document useful (0 votes)
61 views

Arduino - Keyes RFID - Description

This document describes a Keyes RFID Learning Module Set for Arduino that includes a variety of sensors and components for educational use. The set includes an Arduino compatible control board, breadboard, and over 50 electronic components including sensors for sound, temperature, humidity, water level and more. It also includes output devices like LEDs, servos, stepper motors and displays. An English manual is provided in electronic format.

Uploaded by

Ivan Lorgren
Copyright
© © All Rights Reserved
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
61 views

Arduino - Keyes RFID - Description

This document describes a Keyes RFID Learning Module Set for Arduino that includes a variety of sensors and components for educational use. The set includes an Arduino compatible control board, breadboard, and over 50 electronic components including sensors for sound, temperature, humidity, water level and more. It also includes output devices like LEDs, servos, stepper motors and displays. An English manual is provided in electronic format.

Uploaded by

Ivan Lorgren
Copyright
© © All Rights Reserved
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 8

Keyes RFID Learning Module Set for Arduino (official

board)

Arduino combination
Sensors:
1
1
1
4
1
1
1
1
1
5
5
5
5
8
2

x
x
x
x
x
x
x
x
x
x
x
x
x
x
x

Voice detection module;


Temperature / humidity module;
Water level detection module;
4-key module;
3-color RGB module;
XY rocker;
Servo;
Stepping motor + driver board;
Blue LED;
Yellow LED;
red LED;
1K resistor;
10K resistor;
220 ohm resistor;
Buzzer;

4 x Key module (with cap);


2 x Ball switch;
1 x LM35 sensor module;
3 x photoresistor;
1 x Flame;
1 x Infrared receiver;
1 x Adjustable relay;
1 x 1-digital nixie tube;
1 x 8x8 dot matrix module;
1 x 74HC595N chip;
1 x IR remote control;
30 x breadboard jumper;
30 x male to female Dupont cable;
1 x 9V battery;
1 x USB cable

Application: Singlechip development


English Manual/Spec

Yes (electronic format)

Other A product for Arduino that works with official Arduino boards.
CD: http://m5.img.dxcdn.com/CDDriver/CD/sku.220258.rar
Dimensions: 6.50 in x 2.20 in x 0.39 in (16.5 cm x 5.6 cm x 1.0 cm)

Packing List:
1 x Runduino UNO R3 control board
1 x High quality breadboard
1 x RFID module
1 x IC keychain
1 x Non-contact IC card
1 x I2C 1602 LCD module
1 x 5V relay
1 x DS1302 clock module (1 x CR2032
battery, included)
1 x Sound detection module
1 x Temperature / humidity module
1 x Water level detection module
1 x 4x4 key module
1 x 3-color RGB module
1 x XY rocker
1 x Servo (26cm-cable)
1 x Stepping motor (24cm-cable)
1 x Driver module
5 x Blue LED
5 x Yellow LED
5 x Red LED
5 x 1K resistor

5 x 10K ohm resistor


8 x 220 ohm resistor
2 x Buzzer
4 x Key module
4 x Yellow key
2 x Ball switch
1 x LM35 sensor module
3 x Photoresistor
1 x Flame
1 x Infrared receiver
1 x Adjustable relay
1 x 1-digital nixie tube
1 x 4-digital nixie tube
1 x 8x8 dot matrix module
1 x 74HC59M chip
1 x Infrared remote control (1 x 2025
battery, included)
30 x Breadboard jumper (24cm-long cable /
11cm-short cable)
30 x Male to female Dupont cable (22cm)
1 x 9V battery (12cm-cable)
1 x USB cable (53cm)

You might also like