Mini Hi-Fi System

NTRX500/ all

TABLE OF CONTENTS

Chapter

Technical specification ...........................................................1-14

Safety instruction......................................................................2-1
Set Block diagram ....................................................................3-1
Set Wiring diagram ...................................................................4-1
Disassembly diagram ...............................................................5-1
Main and jack board
Circuit diagram.......................................................6-1...6-2...6-3
Layout diagram................................................................6-4..6-5
AMP board
Circuit diagram........................................................................7-1
Layout diagram.......................................................................7-2
MCU board and CD board
Circuit diagram...............................................................8-1...8-2
Layout diagram..............................................................8-3...8-4
Mechanical Exploded view.......................................................9-1

Copyright 2013 Philips Consumer Electronics B.V. Eindhoven, The Netherlands

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or
transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without
the prior permission of Philips.
Published by LX 1 334 Service Audio

Version 1.0

Printed in The Netherlands

Subject to modification

3140 038 60830

1-2

Technical Specification and Connection Facilities

Location of PC Boards
DJ EFFECT Board

Volume Board

Main Board
Tuner Board

MIC Board

BT Board
Jack Board

CD Board

Amp Board

SMPS Board

VERSION VARIATION
NTRX500

Type /Versions:
Board in used:

/55

Service policy

MAIN BOARD
VOLUME BOARD
AMP BOARD
DJ EFFECT BOARD
JACK BOARD
TUNER BOARD
SMPS BOARD
MCU+CD BOARD

/77

x/78

/10

C+M C+M
C+M C+M
C+M C+M
C+M C+M
C+M C+M

C+M
C+M
C+M
C+M
C+M

C+M C+M C+M

M
M
M
C+M C+M C+M

C+M
M
C+M

C+M
C+M
C+M
C+M
C+M

Type /Versions:
Features

Feature diffrence
RDS
VOLTAGE SELECTOR
ECO STANDBY - DARK

* TIPS : C -- Component Lever Repair.

M -- Module Lever Repair
-- Used

NTRX500
/55

/77

x/78

/10



NX5 NX7 ALL SH190 Contact List

No.










Descrpitopn
*(1(5$/3$57)52173$11(/63(&,&),&$7,21
*(1(5$/3$57%$&.3$11(/63(&,&),&$7,21
*(1(5$/3$57*(1(5$/63(&,&),&$7,21
*(1(5$/3$577(&+1,&$/63(&,&),&$7,21
*(1(5$/3$57$8',26,*1$/63(&,&),&$7,21
*(1(5$/3$57&/2&.7,0(563(&,&),&$7,21
*(1(5$/3$57781(563(&,&),&$7,21$OO
*(1(5$/3$57&'0363(&,&),&$7,21
*(1(5$/3$579(56,2129(59,(:63(&,&),&$7,21

Page










1-4
GENERAL DESCRIPTION
MP3-USB Mini Hi FiSystem with Digital Tuner, 1CD/mp3 BT for NX5 NX7 ALL)
(125W x 4 FOR NX5; 239W x 4 FOR NX7 ALL Power Amplifier, LCD Display, Aux in ,
Remote control
LIFETIME : 7 Years

Class

Tuner

Supply + Amplifier

I
II
X
III
Page
10
SAFETY requirements
Version
/98
/55
/12
/05
/79
/37

USB

Recorder

Clock

CD-mp3

11

X
X

N/A

3-7

Safety
EN 60065
EN 60065
EN 60065
EN 60065
EN 60065
UL 60065

EMC
CISPR 13
CISPR 13
EN 55013 / EN 55020
EN 55013 / EN 55020
CISPR 13
FCC99

RADIATION / IMMUNITY requirments ( EMC ) for 12 version only

CLIMATIC requirements
ALL climates
MODERATE climates
PERFORMANCE CLASSES
POWER SUPPLY
MAINS ( A.C. )

: + 5 Dregree
: + N.A

till
till

+ 35 Degree
N.A Degree

120 Vac (110V-10%,

120V 10%)

230 Vac
10 %

127 / 240 Vac

15 %

240 Vac
10 %

220 Vac
f 10 %

/ 37
No
60Hz 5%

/ 12 /05
No
50Hz

/ 55 /98/96
Yes
60/50Hz

/ 79
No
50Hz

/ 61, /93
No
60Hz, 50Hz

Version
Voltage Selection
Frequency
POWER CONSUMER

Stadby :
( DEMO mode " OFF " ) , NOM. A, INPUT
Maximum :
@ 1/8 Prated , NOM. A, INPUT
ECO Power mode :

/12
< 25W

/ 55/98/96
< 25W

/79 /61 /93

<25W

/ 37
<25W

<110W
<130W
<= 1W

<110W
<130W
no

<110W
<130W
<= 1W

<110W
<130W
<= 1W

Quality
: 0.8 % ( Major )
2.0 % ( Mirror )
Reliability
: 3.0 % ( C 42 )
Tested according to General Test Instruction refer to PHILIPS standary ( UAN -D1591 )
Measured according to PHILIPS standary ( UAN - L1059 ) unless other wise stated
All not mentioned date, please refer to PHILIPS standary ( XUW - 0010 - JUNE 2001 )
DERIVED
REMARKS

APPROBATION

Remarks

GENERAL PART 1 - GENERAL SPECICFICATION

Class No

Ver
1
2
3

NX5 NX7 ALL

NAME : MZ.FENG
KT

10
CHECK

DATE :

10

SH 190 - 3

Issued Date
16-4-2013

A4

1-5
TECHNIAL DESCRIPTION

Total power 500W FOR NX5 1000W FOR NX7 ), FOUR INPUT SOURCE, ( Digital Sound Control ). IS ( Incredible Sound )
GENERAL PART
OUTPUT stage Protection
LoudSpeaker D.C. Protection
INDICATORS
Standby Mode Indicator
ECO Mode Indiicator

: Yes
: Yes.

Temperature

: Yes.

Shorcircuit

: Yes

: LCD display Clock active

: LCD turns off, ECO - Standby LED turn on

ELECTRICAL DATA
DSC : Rock, Pop, Jazz, Optimal
MAX YES
IS :
YES
VAC : N/A
WOOX : N/A
Frequency Response ( +/- 3dB ), reference 1kHz
INTERCONNECTS

Channel Differencer at -46dB

Hum ( Volume Minimun - 50mW )( A - weighted )
Residual Noise ( Volume Minium )( A - weighted )
Channel Separation ( at 1 kHz )
Signal / Noise ( weighted )
60Hz - 16kHz

Input Sensitity(2 dB)rated ouput power at 1 kHz and 10kHz.

Line Output Voltage ( *1 )

Tuner
CD

FM 67.5KHz,AM 80% Modulation - 3dB

:
: 0 dB track ( Audio Disc 1, Trk 35 )

Line Out ( Left / Right )

Subwoofer Out

USB

: 0 dB track
: Nor: 600mV Lim: 450mV ~ 550mV for /37
: Nor: 2V Lim: 1.5V ~ 2.5V for /55
input leven Nor: 1.5mv Lim:0.8-2.5mv
: 5V RKPRXWSXW 0:

Headphone
Digital Coaxial Out
Booster Out

AUX

Microphone

OUTPUT POWER ( * 1 )

3
< 200
< 100
45
60

dB
nW
nW
dB
dB

N.A
N.A
N.A
N.A
N.A

At THD = 10% (Measured with 20Hz-20KHz filter), both channels driven ( Low channel at 1KHz, High channel at 10k )

Power output ( RMS ) FOR NX5 ALL

Low channel
High channel

125W per channel ( Lim '-1dB )CD USB AUX

125W per channel ( Lim '-1dB )CD USB AUX

Power output ( RMS ) FOR NX7 ALL

Low channel
High channel

250W per channel ( Lim '-1dB )CD USB AUX

250W per channel ( Lim '-1dB )CD USB AUX

Frequency Response
LOW Frepuency
HI Frepuency

Frequency Response - 60Hz - ref. 1kHz 3 dB

Frequency Response -6KHz - ref. 10kHz 3 dB

Rated Impedance
: 3 Ohms
Remarks
( *1 )

Electrical parameters are to be measuremend at specker terminals

with rated input signal in AUX mode; DSC setting in Jazee mode with DBB OFF
IS off and OSM unless specified otherwise
One channel signal input ( L or R ), two channel load ( < Low ch. L + High ch. L > or < Low ch. R + High ch. R > )
Measuremend output power only for AUX model and CD model of used audio analyzer equipment.

GENERAL PART 1 - TECHNAICAL SPECICFICATION

Ver
1
2
3

Class No

NX5 NX7 ALL

NAME : MZ.FENG
KT

10
CHECK

DATE :

10

SH 190 - 4

Issued Date
16-4-2013
A4

1-6
AUDIO SIGNAL PROCESSING
MP3-USB Mini Hi Fi System with Digital Tuner ,Class AB Power Amplifier
1)

DSC ( Digital Sound Control )

Select AUX as input source with the following set conditions:
Inject sine wave 2V at 1 KHz to L/R channels of AUX-IN socket.
Set DSC to JAZZ(Flat) mode and switch off DBB. Max off
Refence level for DSC's without DBB on=500mW.
Refence level for DSC'S with DBB on=1.7V at the speaker terminal .
Inject sine wave 2V to AUX-IN socket with frequencies indicated in Table 1.
Tabel 1a ( Tolerance 3dB )
DSC Modes with DBB Off

Frequency

JAZZ

POP

ROCK

TECHNO

SAMBA

60 Hz

-1.8 dB

+ 3 dB

+ 6dB

+0.5dB

+0.3dB

1 kHz

0 dB

0.5db

1 dB

0.5dB

10 kHz

-1.5 dB

-0.6dB

+1 dB

-0.5 dB

-3

JAZZ

POP

ROCK

TECHNO

SAMBA

60 Hz

+3 dB

+8dB

5.5 dB

+5.5dB

1 kHz

0 dB

+1 dB

+ 145dB
1 dB

+1 dB

10 kHz

-1.5 dB

+-0.6dB

+1dB

-0.5dB

-3

JAZZ

POP

ROCK

TECHNO

SAMBA

60 Hz

+8dB

+ 14.0 dB

+ 15.0 dB

+ 11.0 dB

+11dB

1 kHz

+0 dB

+1dB

+1 dB

+1 dB

10kHz

-1.5 dB

+ 1dB

+2 dB

- 0.5dB

-0.5

JAZZ

POP

ROCK

TECHNO

SAMBA

60 Hz

+14 dB

+ 17.0 dB

+ 20.0 dB

+ 18.0 dB

+18dB

1 kHz

+0dB

+1dB

+1dB

+1 dB

10 kHz

-0.5 dB

+ 2dB

+3dB

+ 1dB

Tabel 1b ( Tolerance 3dB )

DSC Modes with DBB 1 ON

Frequency

Tabel 1b ( Tolerance 3dB )

DSC Modes with DBB 2 ON

Frequency

Tabel 1b ( Tolerance 3dB )

DSC Modes with DBB 3 ON

Frequency

GENERAL PART 1 - GENERAL SPECICFICATION

Class No

NX5 NX7 ALL

Ver

Issued Date

16-4-2013

2
3

10

NAME : MZ.FENG DATE:25/08/07

KT

CHECK

DATE :

10

SH 190 - 5

A4


AUDIO SIGNAL PROCESSING
MP3 - USB Mini Hi Fi System with Digital Tuner , 1CDCfor NX5 NX7 ALL
3)

IS ( Incredible Sound )
Select AUX as input source.
Inject sine wave 2V at 1kHz to AUX-IN socket, one channel at a time (input level 500mV for /37,2V for /55 ).
Set DSC to JAZZ ( Flat ) mode and switch of DBB, OSM & INCREDIBLE SURROUND.
Adjust volume level to obtain 500mW across 4OHM load at L/R speaker output.
Inject sine wave 2V to AUX-IN socket withfrequency indicated in Table 3 (input level 500mV for /37,2V for /55 ).
Right channel reference to left channel.

Table 3 ( Tolerence 3 dB )
OUTPUT LEVEL

INPUT LEVEL

FREQ

IS OFF

IS ON

LEFT

RIGHT

LEFT

RIGHT

LEFT

RIGHT

60 Hz

2V

- 1.0 dB

1 kHz

2V

+2.0 dB

-17.0 dB

+ 3.5 dB

10 kHz

2V

- 0.5 dB

-0 dB

+ 3.0 dB

-7.0 dB

Note : The above specs also apply to right channel.

4)

DSC Mode ( Jazz , Rock, Techno and Optimal )

h VEC modes
d are software
f
ll d by
b switching
i hi the
h combination
bi i between
b
d
The
controlled
DBB andd DSC modes
as show in Table 4.
DSC MODE

DBB Level preset

Jazz

DBB OFF

POP

DBB 2

Techno
Optimal

DBB 3
DBB 1

Note : When these modes are activ DBB and DSC will not be displayed
5)

MAX ( Maximum Sound )

Select AUX as input source.
Inject sine wave 2V at 1kHz to AUX-IN socket, one channel at a time (input level 600mV for /37,2V for /55 ).
Set DSC to JAZZ ( Flat ) mode and switch of DBB, OSM & INCREDIBLE SURROUND.
Adjust volume level to obtain 500mW load at L/R speaker output.
The 500mW level will be used as 0 dB reference
Inject sine wave 2V to AUX-IN socket withfrequency indicated in Table 5 (input level 600mV for /37,2V for /55 ).
FREQ
60 Hz

Max OFF

Max ON

00 dB

+ 19 .0 dB

1 kHz

0
- 0.5 dB

+ 7.0 dB
+ 10.0 dB

10 kHz

GENERAL PART 1 - AUDIO SIGNAL SPECICFICATION ( 2 )

Class No

Ver

Issued Date

NX5 NX7 ALL

16-4-2013

3
NAME : MZ.FENG
KT

10
CHECK

DATE :

10

SH 190 - 6

A4

1-8
TECHNIAL DESCRIPTION
AUX modle

GENERAL PART

Description

Specification

Output power = , 1 Khz )

125W 1 Db(NX5) 250W 1 Db(NX7)

Channel Unbalance

< = +/- 3 dB

THD + Noise ( 0dB, 1Khz )

<=2%

Channel Crosstalk ( ( 0dB, 1 KHz )

>= 40dB

( 0 dB, 10 KHz )

>= 40dB

Signal to Noise Ratio ( 0dB,1kHz ) ( A - weighted )

>= 60dB( A - weighted )

Frequency Response ( +/- 3dB ), reference 1kHz

60Hz - 16kHz

Microphone
Description

Specification

Output power = , 1 Khz 2mV input)

1W 1 dB

THD + Noise ( 0dB, 1Khz )

<=5%

Signal to Noise Ratio ( 0dB,1kHz ) ( A - weighted )

>= 45dB( A - weighted )

Frequency Response ( +/- 3dB ), reference 1kHz

100Hz - 16kHz

Remarks :

USB SPECICFICATION
Class No

NX5 NX7 ALL

Ver

Issued Date

16-4-2013

2
3

10

NAME : MZ.FENG
CHECK

DATE :

10

SH 190 -9

A4

1-9
TECHNIAL DESCRIPTION
SOFTWARE IMPLEMENTED CLOCK / TIMER FUNCTION WITHOUT 32.768KHZ QUARTZ OSCILLATOR.
GENERAL PART
Timer Setting

Clock and Timer

Timer Wakeup Mode

CD USB or Tuner

Remarks Time Setting

12hr for /37 version, 24hrs for other version.

Volume at Wakeup

Last Setting

1RRI7LPHU6HWWLQJV

&ORFN$FFXUDF\

Nom : 1 sec/day

Limit

: 2 sec/day

,1',&$7256
/&'

'LVSOD\7\SH
Remark

CLOCK / TIMMER SPECICFICATION

Class No

NX5 NX7 ALL

Ver

Issued Date

16-4-2013

2
3

NAME : MZ.FENG
KT

10
CHECK

DATE :

10

SH 190 - 7

A4

1-10
TECHNIAL DESCRIPTION
USB
See also SH 190 USB Audio Module (300605)
Measurment are directly done at the coonector on the board

GENERAL PART
Measurement are directly done at the connector on CDC board
Description

Specification

Output Resistance

< = 1.5 kOhm

Output Voltage RL = 33 k ohm dB, 1 Khz

NC

Channel Unbalance

< = +/- 1 dB

THD + Noise ( 0dB, 1Khz )

<=1.5%

Channel Crosstalk (1k)

>= 40dB

( 0 dB, 10 KHz )

>= 40dB

Signal to Noise Ratio ( 0dB,1kHz ) ( A - weighted )

>= 60dB( A - weighted )

Frequency Response ( +/- 3dB ), reference 1kHz

60Hz - 16kHz

USB Measurement at Set Level

Electrical Parameters are to be measured at speaker teminals across 6 ohm load with 500mW output and DSC setting in Jazz Mode
Description

Specification

Channel Crosstalk ( 0 dB, 1 KHz )

>= 40dB (with 1 KHz filter )

Signal to Noise Ratio ( 0 dB, 1 KHz )

>= 60dBA ( A - weighted )

Channel Unbalance ( 0 dB, 1 KHz )

< +/- 1.5dB

Frequency Response ( +/- 3dB ), reference 1kHz

60Hz - 5.8kHz

Frequency Response ( +/- 4dB ), reference 10kHz

6KHz - 16kHz

Remarks :

USB SPECICFICATION
Class No

NX5 NX7 ALL

Ver

Issued Date

16-4-2013

2
3

NAME : MZ.FENG

10
CHECK

DATE :

10

SH 190 -8

A4

1-11
TECHNIAL DESCRIPTION

GENERAL PART
WAVE RANGE
FM( 55/37 )
87.5
FM( 12 )
87.5 AM (55/37)
530
AM (12)
531 AERIAL
FM
:
AM
:

TOLERANCE
QUARTZ PRECISION

- 108.00 MHz
108.00 MHz
- 1700
kHz
1602
kHz

TUNING GRID
100 kHz
50KHZ
10 kHz
9 kHz

QUARTZ PRECISION
QUARTZ PRECISION

PIGTAIL ANT WIRE 300 Ohm(for/37)

FRAME ANT. 18.1 uH

75ohm for 55/12

INDICATORS
LCD
ELECTRICAL DATA
Nom

A.M

Limit

Unit

Amplification Reverse

-2

-4

AGC Figure of Merit

30

25

dB Amplification Reverse
dB Distortion ( RF 1mV, Frq Dev.75 kHz )

Distortion ( RF 50mV, M 80% )

% Stereo - 46 dB Quieting

IF

450

Modulation Hum.

35

30

Wave Range
MW 610 kHz

MW 1400 kHz

FM 98 MHz

Nom
17
0

F.M.
- 3 dB Limiting Point

:
:

Limit
23.5
-4

Unit
dBf
dB

38

43

dBf

kHz Crosstalk (RF1mV, Freq Dev.40kHz )

25

18

dB

dB Modulation Hum.

45

40

dB

Noise Limited Sensitivity 26 dB

Image Rejection

IF Rejection

Large Signal

Selectivity
S3 / S9 / 300kHz

Nom.

3500

uV/m

32 db

28db

1000mv/m

22db

Lim.

4000

Uv/m

28db

24db

500mv/m

18db

Nom.

1500

uV/m

32db

28db

1000mv/m

22db

Lim.

4000

uV/m

28db

24db

500mv/m

18db

Nom.

18

dBf

40db

65db

116 dBu

45db

Lim.

22

dBf

30db

60db

108 dBu

25db

Auto Search sensitivity

MW 610 kHz

MW 1400 kHz

FM 98 MHz

db/m

Nom.

58

Lim.

10

db/m

Nom.

58

db/m

Lim.

10

db/m

Nom.

26

dBuV

Lim.

10

dBuV

Remarks

TUNER SPECICFICATION
Class No

NX5 NX7 ALL

Ver

Issued Date

16-4-2013

2
3

NAME : MZ.FENG
KT

10
CHECK

DATE :

10

SH 190 - 9

A4

1-12
TECHNIAL DESCRIPTION
Bluetooth Function
GENERAL PART

Bluetooth Version :

Ver2.1 + EDR

Receive A2DP:

N/A

Transmit A2DP:

N/A

Remote Controlled

YES

Receive HSP

N/A

Noise Reduction System

No

INDICATORS
Bluetooth Flashing
Display

:
:

Yes
Yes

ELECTRICAL DATA
Bluetooth at Module level:

Mobile Phone

lim

Unit

125-16khz

f

dB

S/N (Unweighted)





dB

S/N (A-weighted)





dBA

Frequency Response

f

dB

Channel Separation





dB

Distortion

Level Diff

Bluetooth at Set Level

Mobile Phone

10%THD OUTPUT POWER(EQ:FLAT)

Connected distance

250 3dB

8~10

meter

REMARKS

Bluetooth SPECICFICATION
Class No

Ver
1
2
3

NX5 NX7 ALL All Version

NAME : TAN
CHECK:

DATE :
DATE :

SH 190 - 9

Issued Date
16-4-2013

1-13

TECHNIAL DESCRIPTION
CD + MP3 - Part Specifications (CD MECHAISM DA11VF OF SANYO ) 1DISC for NX5 NX7 ALL

Input

Output

Active components

%8

%8

Motor
SA5888

Logic control
BU9543

Active components

Signal processsing
BU9543

D/A converter
BU9543

HF-preamplifier
NA

Servo processor
DA23SR

AUDIO part: Measurement with Audio Signals Disc TCD-781 on spkeakers or Headphone socket with nom.load
Extern
Nom
Description

Lim

Unit

15us / 50us Switchable via Subcode information

De-emphasis
Frequency accuracy

N/A

0.5

Channel Unbalance

0.5

1.5

dB

dB

60

55

dBA
dBA

Frequency Response

( 60Hz - 16 kHz )

Signal to Noise Ration ( Unweighted )

Signal to Noise Ration ( A - weighted )

65

60

Crosstalk ( 1kHz ) ( A - weighted )

55

40

dB

Crosstalk ( 10KHz ) ( A - weighted )

50

40

dB

Hum & Noise ( *1 )

Mv

THD (1KHz -6dB)

0.2

<1.5

THD (10KHz -20dB)

<1

<1.5

REMARKS:
1. Amplification reserve for CD = +2dB ('2dB),Ref.Level for CD is a 0dB track instead of a .-6dB track.

Playability :(acc.To AR 30-05-239 )

Wedge

Limit

Typical

Test disc

600um

900um

TNO 7, 9 of SBC 444A(7104 099 24990)

200um

TNO 1, 24 of 200um disc (7104 099 24960)

800um

TNO 13 of SBC 444A (7104 099 24990)

Eccentric

150um

Fingerprint

No audible defect

Black dot

500um

Skew 0.6mm

No audible defect

TNO 1,6 of 0.6mm skew (7104 099 28260)

Bad HF track

No audible defect

TNO 8 of Sub chassis 8A

Playback position

TNO 11 of Sub chassis 8A

Solid, Normal position (Set is located on a flat surface, floor)

1. Playback of above mentioned tracks possible wihout track loss or audible defects.
2. Double black dot, max. diameter, thin/disk is according to PQR or AR 30-05-239
3. This unit can playback (only) CD-R or CD-RW discs. For performance specification, Please refer to module.
specification of CD99 (3103 308 52190)

CD / MP3 SPECICFICATION
Class No

Ver
1
2
3

NX5 NX7 ALL

NAME : MZ.FENG
KT

10
CHECK

DATE :

10

SH 190 -10

Issued Date
16-4-2013

A4

1-14

VERSION OVERVIEW (NX5 NX7) ALL

APPROBATION
Ver

TUNER

MAT
MIC RIX
MIX SURR
SOC. CORD
. SPK.

AC SUPPLY

DEST
SAFETY

EMC

Wave RANGE

GRID

AERIAL SOCKET

AERIAL SUPPLIED

MAINS
VOLTAGE

OVS

EN60065
CLASS II
SISR
TAIWAN

CISPR 13

FM 87.5-108MHz MW
531-1602kHz
or 530-1710kHz

50kHz
9kHz
10kHz

75 Ohm Coaxial
JST XH 2P Side

75 Ohm Pigtail
Loop Sagami 18.1uH

110-127V
Switched
220 - 240V
50/60Hz

IEC

IEC

No

No

/05 / 12

EUROPE

EN60065
SEMKO
DEMKO
NEMKO SEV
BS415-UK

EN55013
EN55020

FM 87.5-108MHz MW
531-1602kHz

50kHz
9kHz

75 Ohm Coaxial
JST XH 2P Side

75 Ohm Pigtail
Loop Sagami 18.1uH

230V
50Hz

IEC

IEC

No

No

/79

AUST / NZ

EN60065
CLASS II

FM 87.5-108MHz MW
531-1602kHz

50kHz
9kHz

75 Ohm Coaxial
JST XH 2P Side

75 Ohm Pigtail
Loop Sagami 18.1uH

240V
50Hz

IEC

IEC

No

No

/37

USA
Canada

UL 6500

FM 87.5-108MHz MW
530-1710kHz

100kHz
10kHz

JALCO Click Fit

JST XH 2P Side

300 Ohm Dipole

Loop Sagami 18.1uH

120V
60Hz

UL

UL

No

No

/35

China

EN60065
CLASS II

FM 87.5-108MHz MW
531-1602kHz

50kHz
9kHz

75 Ohm Coaxial
JST XH 2P Side

75 Ohm Pigtail
Loop Sagami 18.1uH

220V
60Hz

IEC

IEC

No

No

/ 33

Korea

EN60065
CLASS II

FM 87.5-108MHz MW
531-1602kHz

50kHz
9kHz

75 Ohm Coaxial
JST XH 2P Side

75 Ohm Pigtail
Loop Sagami 18.1uH

220V
60Hz

IEC

IEC

No

No

/55 /98

FCC 99

VERSION OVERVIEW
Class No

Ver
1
2
3

NX5 NX7 ALL

NAME : MZ.FENG
KT

10
CHECK

DATE :

10

SH 190 - 11

Issued Date
16-4-2013

A4

2.Safety instruction

1. General safety

2.Laser safety

Safety regulations require that during a repair:

. Connect the unit to the mains via an isolation transformer.
. Replace safety components indicated by the symbol

only by components identical to the original ones. Any

other component substitution (other than original type)
may increase risk of fire or electrical shock hazard.
Safety regulations require that after a repair, you must
return the unit in its original condition. Pay, in particular,
attention to the following points:
. Route the wires/cables correctly, and fix them with the
mounted cable clamps.
. Check the insulation of the mains lead for external
damage.
. Check the electrical DC resistance between the mains
plug and the secondary side:
1) Unplug the mains cord, and connect a wire between
the two pins of the mains plug.
2)

Set the mains switch the on position (keep the

3)

Measure the resistance value between the mains

mains cord unplug).

plug and the front panel, controls, and chassis
bottom.
4)

Repair

or

correct

unit

when

measurement is less than 1M

the

resistance

5) Verify this, before you return the unit to the

customer/user (ref. UL-standard no. 1492).
6) Switch the unit off, and remove the wire between
the two pins of the mains plug.

This unit employs a laser. Only qualified service personnel

may remove the cover, or attempt to service this device
(due to possible eye injury).
Laser device unit
Type

: Semiconductor laser GaAlAs

Wavelength

: 650nm (DVD)
: 780nm (VCD/CD)

Output power

: 7mW (DVD)
: 10mW (DVD /CD)

Beam divergence: 60 degree

Note: Use of controls or adjustments or performance of
procedure other than those specified herein, may result in
hazardous radiation exposure. Avoid direct exposure to
beam.

3-1

BLOCK DIAGRAM

3-1

4-1

WIRING DIAGRAM

4-1

OUTER

1) Remove 46 screws A/B/C/D/E/F/G as indicated to loosen the top/front/bottom plate.

A
C

Dismantling of the CD part and PCB Board

1) Remove 8 screws H&I as indicated to loosen the CD part.
2) Remove 4 screws J as indicated to loosen the CD Board.
4) Remove 13 screws K and 8 screws L as indicated to loosen the Main Board.
5) Remove 4 screws M as indicated to loosen the Smps power Board.
6) Remove 6 screws N as indicated to loosen the Amp Board.

I
J
H

CIRCUIT DIAGRAM - MAIN BOARD AND JACK BOARD

6-2

6-2

6-3

6-3

6-4

PCB LAYOUT - MAIN BOARD

6-4

6-5

PCB LAYOUT - JACK BOARD

6-5

7-1

CIRCUIT DIAGRAM - AMP BOARD

7-1

7-2

PCB LAYOUT - AMP BOARD

7-2

8-1

CIRCUIT DIAGRAM - MCU BOARD AND CD BOARD

8-1

8-2

CIRCUIT DIAGRAM - MCU BOARD AND CD BOARD

8-2

8-3

PCB LAYOUT - MCU + CD BOARD

8-3

8-4

PCB LAYOUT - MCU + CD BOARD

8-4

9-1

EXPLODED VIEW

9-1