Scribd Logo
Upload

Welcome to Scribd!

  • 248 views

    Samsung Pn60e550d1fxza Fast Track Guide

    Uploaded by

    edsel72
    1. The document provides troubleshooting information for a Samsung TV model PN60E550D1FXZA, including power on sequences, voltage readings, and common issues. 2. Key components discussed are the SMPS, main board, X-board, Y-board, and logic/buffer board. Voltages labeled include Vs, Va, Vsc, and Ve. 3. Troubleshooting steps outlined include checking vital voltages, substituting known good components, and using test patterns to isolate issues to specific boards. Safety notes warn not to reconnect boards until voltages drop below 10V to avoid damage.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Samsung Pn60e550d1fxza Fast Track Guide

    Uploaded by

    edsel72
    248 views7 pages
    1. The document provides troubleshooting information for a Samsung TV model PN60E550D1FXZA, including power on sequences, voltage readings, and common issues. 2. Key components discussed are the SMPS, main board, X-board, Y-board, and logic/buffer board. Voltages labeled include Vs, Va, Vsc, and Ve. 3. Troubleshooting steps outlined include checking vital voltages, substituting known good components, and using test patterns to isolate issues to specific boards. Safety notes warn not to reconnect boards until voltages drop below 10V to avoid damage.

    Original Description:

    Service manual

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document provides troubleshooting information for a Samsung TV model PN60E550D1FXZA, including power on sequences, voltage readings, and common issues. 2. Key components discussed are the SMPS, main board, X-board, Y-board, and logic/buffer board. Voltages labeled include Vs, Va, Vsc, and Ve. 3. Troubleshooting steps outlined include checking vital voltages, substituting known good components, and using test patterns to isolate issues to specific boards. Safety notes warn not to reconnect boards until voltages drop below 10V to avoid damage.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    248 views7 pages

    Samsung Pn60e550d1fxza Fast Track Guide

    Uploaded by

    edsel72
    1. The document provides troubleshooting information for a Samsung TV model PN60E550D1FXZA, including power on sequences, voltage readings, and common issues. 2. Key components discussed are the SMPS, main board, X-board, Y-board, and logic/buffer board. Voltages labeled include Vs, Va, Vsc, and Ve. 3. Troubleshooting steps outlined include checking vital voltages, substituting known good components, and using test patterns to isolate issues to specific boards. Safety notes warn not to reconnect boards until voltages drop below 10V to avoid damage.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 7

    PN60E550D1FXZA

    Fast Track Troubleshooting Manual Rev 6/13/12

    Vs Va Vsc Ve
    Label Voltages

    XMAIN

    SMPS

    Y-MAIN

    SERVICE BULLETINS
    -6/6/12 ASC20120606001: Improve Eco
    Sensor, replace Function Board & Upgrade
    Firmware
    -5/16/12 ASC20120515001: How to send
    TVs emergency data WD & AR data to SEA
    - Quick Parts: Verify before Ordering

    X-Buffer

    MAIN
    Y-Buffer
    Speaker L

    LOGIC/Buffer
    BOARD

    Speaker R

    Wi-Fi

    FIRMWARE

    Jog
    Func.

    HELP : 888-751-4086; 866-894-0637 FE)


    GSPN
    http://gspn3.samsungcsportal.com
    PLUS ONE
    http://my.plus1solutions.net/clientPortals/sam
    sung

    6/8/12 T-MST10PAUSC
    6/2/12 T-MST10PAUSC Version 1013.3
    resolves compatibility with DLNA
    devices.

    HOT TIPS

    Avail on GSPN or Samsung,Com

    -New 2012 Model always check for latest


    bulletins and firmware updates.
    -New combined Logic/Logic Buffer Board.
    -New Pentile Panel (60 inch only)

    Always check for latest updates

    PN60E550D1FXZA

    Fast Track Troubleshooting Manual

    Logic/Buffer Board combined & located


    partially behind Stand.

    CN4003

    X
    DRIVE

    CN5413

    CN5414

    CN4408

    CN4000

    CN5007
    CN5415

    CN4005
    SMPS

    CN5000

    CN5005

    CN5416

    U2

    CN5003

    CN4004

    CN804
    Y
    DRIVE

    CN4002

    CN801
    CN201

    CN5513

    MAIN
    BOARD

    CN302
    CN5514

    CN4407

    CN800S

    CN5006

    CN5004

    CN4001

    CN4404

    CN5001

    CN5002

    CN1602

    CN1201

    CN5515
    CN4403

    CN5516

    CN2003

    CN2000

    CN2000
    Speaker
    (R)

    CN2505

    CN2004

    CN2005

    LOGIC
    BOARD

    Speaker (L)
    CN2704

    B/T

    Wi-fi

    function

    PN60E550 Power On Sequence

    CN804 SMPS to CN4005 X Main

    XMAIN

    SMPS

    X-Buffer
    CN801 SMPS to CN201 Main

    MAIN

    LOGIC/Buffer
    BOARD

    1.
    2.
    3.
    4.

    5V STBY
    PS_ON
    PS_ON
    VS_ON

    Wi-Fi
    Jog
    Func.

    Wi-Fi
    Speaker R
    Jog Func.

    SMPS to Main
    Main to SMPS (all Low Voltages on)
    SMPS thru X-Board to Logic Board
    Logic Board thru X-Board to SMPS
    (VS & VA voltages turned on)

    Fast Track Troubleshooting Manual

    SMPS

    Y-Main

    Vs & Va
    Vsc
    SAMPLE VIEW & READINGS
    .

    Power Supply Trouble Shooting Notes:


    2010/2011/2012 models
    Will not be run with the X or Y main disconnected. The SMPS will shut
    down immediately. However if a meter is first connected to the test point
    when power is applied it will read the correct voltage briefly before shutting down.(You have enough time to check key voltages)
    CAUTION: Do not reconnect any connectors to SMPS or Y/X Boards until
    power has been turned off long enough for Vs to drop below 10V or damage
    will occur to X or Y Boards. .
    Over Current Protection
    For the SMPS Power Supply... If a short circuit occurs on either the VS or
    VA voltage lines, the SMPS stops operating, but should not fail. When the
    short circuit is removed from the source line, the Power Supply will
    operate normally again. Many SMPS Supplies are replaced needlessly!

    X-Main
    Ve

    VITAL SIGNS check Vs, Va, Vsc & Ve

    When troubleshooting, Its very important to first check Vs, Va, Vsc & Ve
    If Vs is missing (0V), disconnect power and check for short. Use ohm meter to
    measure resistance while disconnecting Y-Board & X-Board supply feeds one
    at a time.
    Turn Power On and Test SMPS with short connector removed for correct Vs
    voltage verification. (It may only come up briefly but to full level). Again be
    careful not to reconnect Power Connectors until Vs falls below 10V.
    If Va is low or missing, disconnect Supply Feed to Address Boards and
    Check to see if SMPS Supply is restored. (Note Va feed normally passes
    through the Y-Drive to the Address Boards (Logic Buffer Boards).
    If Vsc is low or missing and Vs was OK, the failure is with the Y-Board
    . the Y-Board generate the Vsc voltage from the Vs supplied by the
    since
    SMPS.
    If Ve is low or missing and Vs is OK, the failure is with the X-Board since the
    Ve is generated by the X-Board from the Vs supplied by the SMPS. Please note
    in some rare cases the Ve may be generated by the Y-Board feed to the XBoard.)
    Other SMPS Voltages:
    Check Low Voltage feeds to the Main Board and other supplied Assemblies.

    Function Control Troubleshooting


    Standby A3.3V
    on Function
    Connector, Pin
    3.
    All Pins should
    read 3.3V
    before
    commands.
    Press, at Key 1,
    Pin 6. 3.3V to
    0.0V DC
    Left, Right, Up,
    Down at
    Key 2, Pin 7.
    Check specific
    voltages on
    chart.
    5

    Fast Track Troubleshooting Manual (PNXXE8000 Video Signal Path Sample)


    TROUBLESHOOTING VIDEO
    PROBLEMS
    1. Verify Video Operation:
    A. Customer Picture Test
    B. Display
    C. If display & Customer Picture
    Test are OK source is suspected
    D. Substitute with known good
    source and cabling.

    2. Using Test Patterns in


    Service Mode:
    Customer Remote
    A. Power off
    B. Mute, 182, Power
    Factory Remote:
    A. Power On
    B. Info, Test

    3. Verify Echo-P Patterns


    4. Verify Logic Patterns
    If Logic Patterns are OK and EchoP are noisy, replace the
    defective LVDS Cable or Main
    Board.
    If Echo-P and Logic Patterns are
    both noisy check for specific
    on screen noise error to
    determine failure. (next slide)

    ON SCREEN FAILURE EXAMPLES:


    NOTE: X/Y MAIN Combined.

    Fast Track Troubleshooting Manual

    ALIGNMENTS:

    1.

    Check/Adj. VS, VA, VE, & VSC according to Panel Label


    and Diffusion test. (see bulletins for any special notes
    before making changes)

    DIFFUSION TEST/ADJ. (cell miss-firing)


    - Allow the unit to warm up 15 to 20 minutes
    - Access the Burn Protect Sig. Pattern in Cust. Menu.
    -Adjust the Vs volts until screen errors are gone in
    both dark and bright areas.
    -Adjust the Vs volts within +/- 10V on the panel label.
    -NOTE: Diffusion may appear with aging panels.
    New panels with Diffusion consult bulletins and/or report
    problem.

    2. Check/Set Option Bytes:


    NOTE: Verify correct settings with latest tips!

    60DSArd

    You might also like