161 110 Falk Drive One Gear Drives Catalog

FALK DRIVE ONE
ONE DRIVE FOR ONE WORLD

English Inch
now more competitive than ever
ONE RELIABLE DRIVE

For more than 100 years, the Falk name
has earned a reputation for delivering the highest
value gear drive solutions in the power transmission industry.
The Falk Drive One product family of gear drives
carries on this tradition. Its robust yet elegant
design integrates the proven features and
benefits of past designs with industry-leading
innovations derived from our experience with heavy

industrys most demanding applications.
The result is a new standard in drive reliability
and a drive with the design and feature sets
that make it easy for you to standardize on one
platform for all your mid-to-large-size drive
requirements.
Falk Drive One Universal Series (Sizes 1130 1210)

Large inspection
cover provides
easy access for
maintenance
Dipstick with
filtered breather
allows easy lube
checks, helping
extend oil/drive
life. Falk AirMax
optional
6-sided mounting
capability allows
mounting in any
position
Precision-ground
carburized high
strength gearing
assures long
life and quiet
operation
Jacking bolt
holes simplify
installation and
alignment
Internal oil
distribution
system contributes
to long bearing
life and cooler
running drives
Tandem lip seals
with greasepurged cavity (Viton high
speed) on all shaft
extensions help
prevent leaks
Easy-adjust
tapered roller
bearings offer
longer life and
simplified
maintenance
with 18% higher ratings
Falk Drive One Conveyor Series (Sizes 1220 1250)

In addition to the quality features found on all
Falk Drive One units, our Conveyor Series
includes unique features to optimize performance
and reliability for high capacity belt conveyors,
and other critical equipment applications.
Falk AirMax
breather and
sealed dipstick
prevent water and
contaminant
ingress
Right or left
hand mounting
means one spare
accommodates
both configurations
Patented internal
oil distribution
system helps
keep vital
components
properly lubricated
and ensures
lasting performance
Split housing
design facilitates
assembly/
disassembly and
inspection
Housing surface
area, a proprietary
elevated oil
distribution pan
and reduced oil
sump allow most
applications to be
cooled with shaft
driven fans
Falk Magnum
No Leak drain
back seals
w/grease-purged
cavity are
standard on all
shaft extensions
Large shaft
extensions offer
simplified
installation of
shaft couplings
and drive
accessories
Rugged ductile
iron housing
stands up to high
impact and shock
service
Falk Drive One High Torque Series (Sizes 1160 1210)

Designed for use anywhere
slow speed and high torque
is required.
A large range of
standard ratios
from 160:1 to
710:1 and madeto-order ratios of
1000:1 and higher ensure a cost
competitive drive
for all slow speed
applications
tandem lip seals

with grease purge
cavity (Viton high
speed) on all
shaft extensions
prevent leaks
All bearings
sized for 60,000
L10 life @ a 1.5
Service Factor
Standard accessories such as

torque arms,
shrink discs,
backstops and
motor interfaces
provide for
packaged
solutions, from
electrical source
to driven
equipment
Stock components
reduce lead time
Higher efficiency
than low speed /
high torque hydraulic motors save on
energy costs year
after year
Compact size
reduces space
requirements
ONE COMPLETE SOLUTION

Falk Drive One is designed to be the most
reliable drive available for mid-to-large-sized drive
requirements. Its also designed to set a new
standard for responsiveness to customer needs for
comprehensive, cost-effective power transmission
solutions.
Fewer parts than traditional designs mean even
greater reliability and a highly competitive
initial cost
Parts standardization across sizes means
quicker turn times and up to a 75% reduction
in parts inventories
Pre-packaged complete drive solutions minimize
installation time and costs
A wide range of sizes and 6-sided mounting
flexibility make this solution easy to standardize
on no matter where heavy industry takes you
around the world
Standardized Drives
Motorized:
Standard brackets, motor adapters and motor
mounts accept NEMA and IEC motor frames.
Low Ratio:
High thermal and high capacity drives are ideal
for pump and paper machine applications.
High Ratio:
Compound drives with an Falk Ultramite
gearmotor primary enables unlimited ratio
availability.
Mixer:
Parallel and Right Angle vertical drives offer
drywell assembly and positive lubrication of upper
bearings.
Shaft Mounted Conveyor Drives

Alignment-Free:
Eliminates motor and driven equipment alignment.
Rugged motor flange accommodates standard TD
and IEC flanged motors, with fluid or standard
couplings.
Swing Base:
Most flexible design; handles widest assortment of
motor/coupling combinations.
Bucket Elevator:
Inching drive package designed for low maintnance, long life and safety.
V-Belt:
Top mounted motor with a v-belt connection
delivers a compact/cost efficient solution.
High Torque Planetary Drives

Planetary final stage provides a compact, costeffective alternative to hydraulic and conventional
low rpm drives.
Shaft-Mounted
Conveyor
Alignment Free
Shaft-Mounted
Conveyor
Swing Base
Pump & Paper

Low-Ratio
Pump &
Paper
Low Ratio/
High
Thermal
High-Ratio
Parallel &
Right Angle
Mixer
Parallel
Vertical
Motorized
Motor
Bracket
Mixer Right-Angle
Vertical
Shaft-Mounted
Conveyor
Bucket Elevator
Motorized
Motor
Adapter
Large Conveyor
Parallel
Shaft-Mounted
Conveyor
V-Belt
Package
High-Torque
Planetary
Parallel
Large Conveyor
Right-Angle
High-Torque
Planetary
Right-Angle
ONE QUICK DRIVE

In an increasingly competitive global marketplace,
we strive to help you succeed by providing the best
overall customer experience through our innovative products and services, exceptional people and
speed in everything we do.
Quick Ship
Falk Drive One design streamlines the

manufacturing process
Our worldwide
5 DAYS OR LESS
network of
strategically
located
Rexnord Build
Centers assures
rapid availability
on a global basis
Centralized Build Center utilizes state-of-theart flow manufacturing techniques for reduced
lead times throughout North America
Many sizes, types, and ratios can be shipped
in 15 days
Quick Select
Our commitment to speed includes the Quick

Selection Guide, which makes it fast and easy
to choose the right Falk Drive One model for
your job.
Simply look up the application, horsepower
and speed
Options enable you to select the turnkey
solution that best fits your requirements,
including motors, drives, fans virtually
everything you need is in one complete,
convenient package, identified by
one part number
Quick Repair / Exchange
A comprehensive
range of solutions
designed to meet
your cost and
lead time
requirements
Falk Drive One
Repair Kits provide
all the bearings, seals, hardware and instructions
to do a partial drive rebuild at your facility
Benefits:
Improve performance and operating life
Cost savings up to 65% over obsolete
equipment
Better unit and parts availability
Easy drop-in replacement
3-year heavy-duty warranty
The alternative to:
Expensive, obsolete drives
Hard-to-get imported components
Problem applications
Falk Drive One redefining lowest total cost
throughout North America and around the world.
One Worry-Free Solution

Quick Change
Falk Drive One

allows you to easily
replace any type and
brand of large drive
Conveniently upgrade
any drive to the
lowest total cost
leader
At the same time,
standardize on a
single drive platform
to maximize your
savings over time
Full 3-Year Warranty

standard on every
Falk Drive One
Know-How & Customer Service

People:
24/7 support
Field service
Problem solving support
Information:
Detailed selection guides
Service/parts literature
Complete online reference
material
Distributor+ Added Value
Project coordination
Installation assistance
Field support
Spares planning
Customer in-plant knowledge
Falk Drive One Selection Guide
Selection Guide 161-110, November 2009

Table of Contents
Basic Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Conditions Affecting Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Mechanical Service Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12
How to Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Thermal Factors & Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Selection Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Accessory & Option Information . . . . . . . . . . . . . . . . . . . . . . . . . . 16-19
Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Parallel Shaft Type DHC, DHF, DHP, DHJ, DHQ, DHT, DVA,
DVC, DVM Gear Drives
Assemblies & Rotations . . . . . . . . . . . . . . . . . . . . . . . . . . 22-25 &153

Power & Torque Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . 26-35 &154
Basic Thermal Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-61 &154
LS Shaft Overhung Loads & Thrust Capacities . . . . . . . . . . . . . . . 62-67
Exact Ratios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68-69 &154
WR2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72-105 &155-157
Right Angle Shaft Type DBB, DBF, DBJ, DBC, DBP, DBQ, DBT,
DHB, DXA, DXC, DXM, DZC, DZT Gear Drives
Assemblies & Rotations . . . . . . . . . . . . . . . . . . . . . . . . 106-107 &158

Power & Torque Ratings . . . . . . . . . . . . . . . . . . . . . . . . 108-113 &159
Basic Thermal Ratings . . . . . . . . . . . . . . . . . . . . . . . . . 114-125 &159
Exact Ratios & WR2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 126-127 &159
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128-151 &160-162
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163-209
Conversion Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
Factory Warranty Were so confident in the performance and

reliability of our latest generation of Falk gear drives that were
backing this comprehensive offering with the best standard
warranty in the business. Our full, 3-year Heavy-Duty Warranty
provides shaft-to-shaft protection on all Falk components
including bearings and seals (warranty extends for 3 years from
date of shipment). Its an industry first... and one more powerful
reason why Rexnord is your ultimate bottom-line value.
Basic Information
Safety Notes
Falk Gear Drives The Falk and Rexnord name on the gear drive
is the purchasers assurance that the drive was engineered, rated
and manufactured to sound design practices.
The power supplied to the geared drive must be equal to or less than
the power for which the drive was selected using the appropriate
mechanical service factor for the application. The customer must
assume the responsibility of isolating the gear drive from any vibratory
or transient load induced by the driven equipment.
Install and operate Rexnord products in conformance with
applicable local and national safety codes and per Rexnord
installation manuals which are shipped with gear drives and are
also available upon request. Suitable guards for rotating members
may be purchased from Rexnord as optional accessories. Contact
your local Rexnord district office for complete details.
Copyright 2001, 2009, Rexnord Industries, LLC. All Rights Reserved. Litho in U.S.A.
DRIVE ONE, RENEW, REXNORD, and STEELFLEX, are registered trademarks.
Falk is a trademark of Rexnord. The contents of this selection guide are subject to change without
notice or obligation. Information contained herein should be confirmed before placing orders.
Rexnord Industries, LLC, 2001, 2009.
People Conveying Equipment Selection of Rexnord gear drives

for applications whose primary purpose is the transportation of
people is not approved. This includes such applications as freight
or passenger elevators, escalators, man lift platforms and ski tows
and ski lifts.
If the primary purpose of the application is material conveyance
and occasionally people are transported, the Rexnord warranty
may remain in effect provided the design load conditions are not
exceeded and certification to the appropriate safety codes and
load conditions has been obtained by the system designer or end
user from the appropriate enforcement authorities.
Gear Drive Mechanical Power Ratings Gear drive mechanical
power ratings stated in this selection guide allow 100% overload
for starting loads and momentary overloads associated with
normal electric motor driven standard applications operating 10
hours per day under uniform conditions, applications where the
recommended mechanical service factor per Page 11 or 12 of this
selection guide is 1.00, and where the actual mechanical service
factor of the gear drive versus full motor rated power is equal to or
greater than 1.00.
For other standard applications not meeting conditions stated in
the previous paragraph, determine the appropriate mechanical
service factor from Page 11 or 12, then calculate an equivalent
power by multiplying the actual power transmitted by the previously
determined mechanical service factor. For these applications, the
mechanical power rating of the gear drive selected must equal or
exceed the equivalent power that has been calculated.
For non-standard applications, those where excessive overloads,
reversing service, mechanical brakes, or oversize prime movers
are present, refer to Page 10, Conditions Affecting Selection, for
special instructions.
Gear Drive Basic Thermal Ratings Gear drive basic thermal
ratings stated in this selection guide are based on the following
assumed conditions:
Ambient temperature is 77F (25C).
Altitude is between sea level and 2460 feet.
Ambient air velocity is between 1.6 fps and 4.6 fps typical of a
large indoor room.
Duty cycle is continuous.
Orientation is floor mounted with shafts in same horizontal plane.
Thermal Factors & Procedures, Page 14, permit the calculation of
an application adjusted thermal rating for the gear drive when local
thermal conditions are different than those stated above. It is not
necessary to apply the mechanical service factor to the basic thermal
rating when determining the thermal adequacy of a gear drive.
Interpolation of Gear Drive Mechanical Power Ratings and
Torque Ratings When the high speed shaft rpm for an actual
application falls between two tabulated high speed shaft rpms found
in the selection tables, interpolate to determine gear drive rating.
Stored and Inactive Drives Each gear drive is spin-tested with
a rust preventive oil that will protect parts against rust for a period
of 4 months in an outdoor shelter or 12 months in a dry building
after shipment from the Factory.
Periodically inspect stored or inactive drives and spray internal
parts with rust inhibitor every six months or more often, if
necessary. Drain oil before adding rust inhibitor. Indoor dry
storage is recommended.
Drives ordered for extended storage can be treated at the Factory
with a special preservative and sealed to rust-proof parts for
periods longer than those cited above, if specified on the order.
Refer to Service Manual 128-014 for preparation of stored and
inactive gear drives.
(161-110) 9
Conditions Affecting Selection

NonStandard Selection Procedures
Some applications require special procedures, or are refer to Factory.
Excessive Overloads The maximum momentary or starting load
applied to the gear drive must not exceed 200% of the rated
load capacity of the gear drive (100% overload). Rated load
capacity of the gear drive is defined as the power rating published
in this selection guide with a mechanical service factor of 1.00.
If the actual maximum momentary or starting load exceeds the
conditions stated above, calculate an equivalent input power
associated with the excessive overload by dividing the maximum
overload by two. The gear drive selected must have a rated load
capacity equal to or greater than the equivalent input power.
Frequency of Starts Starting frequency is an important
consideration when selecting a gear drive. Applications involving
2 to 3 equally spaced starts per hour must utilize a minimum 1.5
service factor for unloaded starts, and a minimum 1.75 service
factor for fully loaded starts. For applications involving more than
3 starts per hour, refer to Factory the application specifics such as
starting frequency and maximum starting torque. AC motors also
have similar limitations. The addition of a fluid coupling as a soft
start device would increase the number of allowable starts.
Reversing Service Applications involving either more than 20
reversals per 10 hour period, or less than 20 reversals per 10 hour
period with peak torques greater than 200% of normal load must
be referred to Factory.
Brake Equipped Applications When a gear drive is equipped
with a working brake that is used to decelerate the motion of the
system and the brake is located between the prime mover and the
gear drive, select the gear drive based on the brake rating or the
highest equivalent input power, whichever is greater. If the brake is
used for holding only and is applied after the motion of the system
has come to rest, the brake rating must be less than 200% of the
rated load capacity of the gear drive selected for the application.
If the brake rating is greater than 200% of the rated load capacity,
refer the application to the Factory. Also refer to the Factory all
applications in which the brake is located at the output shaft of the
gear drive.
Oversize Prime Movers Recommended Mechanical Service
Factors do not cover applications that require oversize prime
movers for high energy or peak loads. Refer such applications to
the Factory for selection of suitable gear drives.
Speed Variation or Multi-Speed Applications The gear
drives offered in this selection guide are designed to operate with
splash lubrication on any single speed application and any ratio
shown in the selection guide unless otherwise noted. It is essential
that all orders indicate the operating speed requirements and
ratio so that the proper internal oil distribution accessories can be
supplied for the specific speed.
Falk gear drives use different oil levels for various gear drive sizes,
speeds and ratios. Consequently, to operate an existing gear
drive at different speeds from those shown on the nameplate, full
application and nameplate information must be referred to the
Factory for review of the lubrication system.
All variable or multi-speed applications will be referred to the
Engineering Department to specify lubrication components for
adequate lubrication at the slowest speed, without excessive
temperature or churning at the highest speed. It is essential that
all orders indicate minimum and maximum speeds, as well as the
speed duration cycles. A separate motor-driven oil pump (at an
extra charge) may be required.
When selecting gear drives for multi-speed or variable speed
applications, determine the speed at which the greatest torque is
developed and select the gear drive on this basis. If the speed is
not listed in the selection table, interpolate to determine the gear
drive rating.
10 (161-110)
Application Adjusted Thermal Rating, Page 14, The

Application Adjusted Thermal Rating is the actual power that a
gear drive will transmit continually for 3 hours or more without
overheating. Although it is not necessary to apply the mechanical
service factor when determining thermal adequacy of a gear
drive, the Application Adjusted thermal Rating considers thermal
factors associated with the application that will affect the ability of
the gear drive to dissipate thermal energy. These thermal factors
include ambient temperature, altitude above sea level, ambient air
velocity, inlet water temperature (when cooling tubes are offered),
gear drive orientation and duty cycle. Thermal factors on Page 14
are used to adjust the Basic Thermal Rating when determining the
Application Adjusted Thermal Rating.
A check of the application adjusted thermal rating versus the actual
power transmitted is necessary for the following applications:
Continuous duty application where the gear drive runs
continuously without shutdown for 3 hours or more per day.
Intermittent duty applications where the gear drive operates
for 3 hours or more per day, and run time intervals exceed the
duration of the immediately following shutdown intervals. If any
run time interval equals or exceeds 3 hours, the application is
considered continuous duty.
The duty cycle factor permits an upward adjustment of the basic
thermal rating associated with intermittent duty applications above,
and takes into account simply the % operating time per hour of the
gear drive, regardless of duration relationship between run time
intervals and down time intervals, and provided no specific run
time interval exceeds one hour in duration.
Other short interval intermittent duty applications, not meeting criteria
stated above, may generate only modest thermal energy to be
dissipated by the gear drive. Refer full application details to the the
Factory for selection of the minimum cooling method that is adequate.
Effects of Solar Energy If a drive operates in the sun at ambient
temperatures over 100F (38C), then special measures must be
taken to protect the drive from solar energy. This protection can
consist of a canopy over the gear drive or reflective paint on the
gear drive. If neither is possible, a heat exchanger or other cooling
device may be required.
Overhung Loads and Thrust Loads Overhung loads and thrust
loads must be taken into account when selecting a gear drive.
If either an overhung load or thrust load is imposed on the gear
drive, or if both an overhung load and thrust load are applied
simultaneously, refer application details to the Factory for correct
gear drive selection.
Product Modifications The Factory can supply special product
modifications to suit your application needs. Contact your local
Representative for housing modifications, special ratios, special
shafts, special mounting orientations, accessory modifications and
other special application requirements.
Seal Housing Grease All gear drives will be shipped with Falk
LTG grease in the seal housing cavities. Where this grease could
contaminate products produced by customer processes, such as in
the food and drug industries, clearly indicate on your purchase order
that, Gear drive seal housing cavities must not contain grease.
Oil Pump Equipped Application When a gear drive is
equipped with an external motor driven oil pump, and the ambient
temperature falls below 50F (10C), or the oil viscosity is in
excess of 8000 SSU, an oil heater may be required to maintain a
satisfactory flow rate at startup to prevent bearing failure. Consult
the Factory.
Backstop-Equipped Drives Drives with integral backstops
require minimum service factors as shown in Table 1A, Page 11.
Select drive to the recommended Service Factor in Table 1A, Table
2 or 3, whichever is greater.
Table
Mechanical Service Factor conversions
Table 2 or 3
3 to 10 hour
Service
Factor
1.25
1.25
1.50
1.75
2.00
3 to 10 Hours
per Day
Over 10 Hours
per Day
Multi-Cyl.
Engine
1.25
1.50
1.75
2.00
2.25
Multi-Cyl.
Engine
1.50
1.75
2.00
2.25
2.50
IntermittentUp to
3 Hours per Day
Motor
1.25
1.25
1.25
1.50
1.75
Multi-Cyl.
Engine
1.25
1.25
1.50
1.75
2.00
For applications operating one half hour or less per day and applications driven
by single cylinder engines, refer to the Factory.
These service factors are based on the assumption that the system is free from
serious critical and torsional vibrations and that maximum momentary or starting
loads do not exceed 200% of the normal load.
Table 1A Backstop Minimum Service Factor

DRIVE SIZE
M1130
M1140
M1150
M1160
M1170
M1180-M1250
Minimum Service Factor

1.58
1.80
1.64
1.46
1.54
1.25
Occasional and intermittent service or engine driven applications

For multi-cylinder engine driven applications and all applications
operating intermittently up to 3 hours per day, refer to Table 2 or
3 for the Service Factor of the same application operating 3 to
10 hours per day. Next, in the first column of Table 1, find this
same Service Factor in bold face type. Then, to the right, under
the desired hours service and prime mover, locate the converted
Service Factor.
For example, from Table 3, the Service Factor is 1.25 for a
uniformly loaded belt conveyor. From Table 1, for the same
application the following are the Service Factors for various
conditions.
1. Engine driven 3 to 10 hours per day; use 1.50 Service Factor.
2. Engine driven up to 3 hours intermittently; use 1.25 Service
Factor.
3. Motor driven up to 3 hours intermittently; use 1.25 Service
Factor.
MOUNTING POSITION Standard mounting positions for
types DH & DB are with the input and output shafts horizontal and
for DV & DX with the output shafts vertical.
Allowable mounting angles for standard oil levels are;

Bridge
Slope
DH & DB
0 Up & 4 Down
1.5
Consult the Factory for other angles.
Drawing Symbols The following symbols are used throughout

the dimensioned drawings.
= OIL DIPSTICK
= BREATHER
= OIL FILL
= OIL DRAIN
Table
Mechanical Service Factors

listed by Industry
for electric motor, steam turbine or hydraulic motor drives . . .

recommendations are MINIMUM and normal conditions are
assumed.
Service
Industry
3 to Over
10
10
Hour Hour
BOTTLING AND BREWING

Bottling Machinery . . . . . . . . . . 1.25 1.25
Brew Kettles, Continuous Duty . . 1.25 1.25
Can Filling machines . . . . . . . . 1.25 1.25
CookersContinuous Duty . . . . 1.25 1.25
Mash TubsContinuous Duty . . 1.25 1.25
Scale HoppersFrequent Starts . 1.25 1.50
CLAY WORKING INDUSTRY
Brick Press . . . . . . . . . . . . . . . . 1.75 2.00
Briquette Machines . . . . . . . . . . 1.75 2.00
Clay Working Machinery . . . . . . 1.25 1.50
Pug Mills . . . . . . . . . . . . . . . . . 1.25 1.50
DISTILLING . . . . . . . . . . . . .
See Brewing
DREDGES
Cable Reels, Conveyors . . . . . . 1.25 1.50
Cutter Head, Jig Drives & Pumps 2.00 2.00
Maneuvering Winches . . . . . . . 1.75 2.00
Screen Drives . . . . . . . . . . . . . . 1.75 2.00
Stackers, Utility Winches . . . . . . 1.25 1.50
FOOD INDUSTRY
Beet Slicers . . . . . . . . . . . . . . . 1.25 1.50
Bottling, Can Filling Machine . . . 1.25 1.25
Cereal Cookers . . . . . . . . . . . . 1.25 1.25
Dough Mixers, Meat Grinders . . 1.25 1.50
LUMBER INDUSTRY
BarkersSpindle Feed . . . . . . . 1.25 1.50
BarkersMain Drive . . . . . . . . 1.75 1.75
Carriage Drive . . . . . . . . . . . . . Refer to Factory
Conveyors
Burner . . . . . . . . . . . . . . . . . . . 1.25 1.50
Main or Heavy Duty . . . . . . . . . 1.50 1.50
Main Log . . . . . . . . . . . . . . . . . 1.75 2.00
Re-Saw Merry-Go-Round . . . . . 1.25 1.50
Slab . . . . . . . . . . . . . . . . . . . . 1.75 2.00
Transfer . . . . . . . . . . . . . . . . . . 1.25 1.50
ChainsFloor . . . . . . . . . . . . . 1.50 1.50
ChainsGreen . . . . . . . . . . . . 1.50 1.75
Cut-Off SawsChain & Drag . . 1.50 1.75
Debarking Drums . . . . . . . . . . . 1.75 2.00
FeedsEdger . . . . . . . . . . . . . 1.25 1.50
FeedsGang . . . . . . . . . . . . . 1.75 1.75
FeedsTrimmer . . . . . . . . . . . . 1.25 1.50
Log Deck . . . . . . . . . . . . . . . . . 1.75 1.75
Log HaulsIncline, Well Type . . 1.75 1.75
Log Turning Devices . . . . . . . . . 1.75 1.75
Planer Feed . . . . . . . . . . . . . . . 1.25 1.50
Planer Tilting Hoists . . . . . . . . . 1.50 1.50
RollsLiveOff Bearing
Roll Cases . . . . . . . . . . . . . . . 1.75 1.75
Sorting Table, Tipple Hoist . . . . . 1.25 1.50
TransfersChain & Craneway . . 1.50 1.75
Tray Drives . . . . . . . . . . . . . . . . 1.25 1.50
Veneer Lathe Drives . . . . . . . . . Refer to Factory
OIL INDUSTRY
Chillers . . . . . . . . . . . . . . . . . . 1.25 1.50
Oil Well Pumping . . . . . . . . . . . Refer to Factory
Paraffin Filter Press . . . . . . . . . . 1.25 1.50
Rotary Kilns . . . . . . . . . . . . . . . 1.25 1.50
PAPER MILLS
Agitator (Mixer) . . . . . . . . . . . . . . .
1.50
Agitator for Pure Liquids . . . . . . . . .
1.25
Barking Drums, BarkersMech. . . .
2.00
Beater . . . . . . . . . . . . . . . . . . . . . .
1.50
Breaker Stack . . . . . . . . . . . . . . . . .
1.25
Calender . . . . . . . . . . . . . . . . . . .
1.25
Chipper . . . . . . . . . . . . . . . . . . . . .
2.00
Chip Feeder . . . . . . . . . . . . . . . . . .
1.50
Coating Rolls . . . . . . . . . . . . . . . . .
1.25
Conveyors
Chip, Bark, Chemical . . . . . . . . . . .
1.25
Log (incl. Slab) . . . . . . . . . . . . . . . .
2.00
Couch Rolls . . . . . . . . . . . . . . . . . .
1.25
Cutter . . . . . . . . . . . . . . . . . . . . . .
2.00
Cylinder molds . . . . . . . . . . . . . . . .
1.25
Dryers
Paper Mach. & Conveyor Type . . . . .
1.25
Embosser . . . . . . . . . . . . . . . . . . . .
1.25
Extruder . . . . . . . . . . . . . . . . . . . . .
1.50
Service
Industry
3 to Over
10
10
Hour Hour
Fourdrinier Rolls
Lumpbreaker, Wire Turning
Dandy & Return Rolls . . . . . . . . .
1.25
Jordan . . . . . . . . . . . . . . . . . . . . .
1.50
Kiln Drive . . . . . . . . . . . . . . . . . . .
1.50
Mt. Hope & Paper Rolls . . . . . . . . .
1.25
Platter . . . . . . . . . . . . . . . . . . . . .
1.50
Presses (Felt & Suction) . . . . . . . . .
1.25
Pulper (Continuous) . . . . . . . . . . .
2.00
Repulper (Heavy Shock)
...
2.00
Reel (Surface Type) . . . . . . . . . . . .
1.25
Screens
Chip & Rotary . . . . . . . . . . . . . . .
1.50
Vibrating . . . . . . . . . . . . . . . . . . .
2.00
Size Press . . . . . . . . . . . . . . . . . . .
1.25
1.25
Super Calenders . . . . . . . . . . .
Thickener & Washer
AC Motor . . . . . . . . . . . . . . . . . .
1.50
DC Motor . . . . . . . . . . . . . . . . . .
1.25
Vacuum Pumps . . . . . . . . . . . . . . .
1.50
Wind & Unwind Stand . . . . . . . . . .
1.25
Winders (Surface Type) . . . . . . . . .
1.25
Yankee Dryers . . . . . . . . . . . . . .
1.25
PLASTIC INDUSTRY
Batch Drop Mill, 2 smooth rolls 1.25 1.25
Calenders . . . . . . . . . . . . . . . 1.50 1.50
Compounding Mills . . . . . . . . 1.25 1.25
Continuous Feed, Holding &
Blend Mill . . . . . . . . . . . . . 1.25 1.25
Extruders . . . . . . . . . . . . . . . . 1.50 1.50
Variable Speed Drive . . . . . . . 1.50 1.50
Fixed Speed Drive . . . . . . . . . . 1.75 1.75
Intensive Internal Mixers
Batch Mixers . . . . . . . . . . . . . 1.75 1.75
Continuous Mixers . . . . . . . . . 1.50 1.50
RUBBER INDUSTRY
Batch Drop Mill, 2 smooth rolls 1.50 1.50
Calenders . . . . . . . . . . . . . . . 1.50 1.50
Cracker, 2 corrugated rolls . . . 2.00 2.00
Cracker Warmer2 roll.
1 corrugated roll . . . . . . . . . 1.75 1.75
Extruders
Continuous Screw Operation . . 1.75 1.75
Intermittent Screw Operation . . 1.75 1.75
Holding, Feed & Blend Mill
2 Roll . . . . . . . . . . . . . . . . . 1.25 1.25
Intensive Internal Mixers
Batch Mixers . . . . . . . . . . . . . 1.75 1.75
Continuous Mixers . . . . . . . . . 1.50 1.50
Mixing Mill2 smooth rolls
(if corrugated rolls are used.
use Cracker Warmer
service factors) . . . . . . . . . . . 1.50 1.50
Refiner2 roll . . . . . . . . . . . . 1.50 1.50
SEWAGE DISPOSAL
Bar Screens . . . . . . . . . . . . . . 1.25 1.25
Chemical Feeders . . . . . . . . . . 1.25 1.25
Collectors . . . . . . . . . . . . . . . 1.25 1.25
Dewatering Screens . . . . . . . . 1.50 1.50
Scum Breakers . . . . . . . . . . . . 1.50 1.50
Slow or Rapid Mixers . . . . . . . 1.50 1.50
Thickeners . . . . . . . . . . . . . . . 1.50 1.50
Vacuum Filters . . . . . . . . . . . . 1.50 1.50
SUGAR INDUSTRY
Cane Knives, Crushers . . . . . . . . .
1.75
Mills (low speed end) . . . . . . . . . .
1.75
TEXTILE INDUSTRY
Batchers, Calenders . . . . . . . . 1.25 1.50
Card Machines . . . . . . . . . . . 1.25 1.50
Dry Cans, Dryers . . . . . . . . . . 1.25 1.50
Dyeing Machinery . . . . . . . . . . 1.25 1.50
Knitting Machinery . . . . . . . . . Refer to Factory
Looms, Mangles,
Nappers, Pads . . . . . . . . . . . 1.25 1.50
Range Drives . . . . . . . . . . . . . Refer to Factory
Slashers, Soapers, Spinners,
Tenter Frames, Washers,
Winders . . . . . . . . . . . . . . 1.25 1.50
WINDLASS . . . . . . . . . . . . . Refer to Factory
++ Service Factors for paper mill applications are applied to the nameplate rating
of the electric drive motor at the motor rated base speed and are consistent with
those shown in TAPPI standards.
Anti-friction bearings only.
A service factor of 1.25 may be applied at base speed of a super calender
operating over a speed range of part constant power and part constant torque
where the constant power speed range is greater than 1.5 to 1. A service factor of
1.25 is applicable to super calenders operating at constant torque over the entire
speed range or where the constant power speed range is less than 1.5 to 1.
(161-110) 11
Table
for electric motor, steam turbine or hydraulic motor drives . . .

recommendations are MINIMUM and normal conditions are
assumed.
Mechanical Service Factors

listed by Industry
Service
3 to Over
10
10
Hour Hour
Industry
AGITATORS
Pure Liquids . . . . . . . . . . . . . . .
Liquids & Solids . . . . . . . . . . . .
Liquids-Variable Density . . . . . .
APRON CONVEYORS . . . . .
Uniformly Loaded or Fed . . . . . .
Heavy Duty . . . . . . . . . . . . . . .
APRON FEEDERS . . . . . . . .
ASSEMBLY CONVEYORS
Heavy Duty . . . . . . . . . . . . . . .
BALL MILLS . . . . . . . . . . . . .
BARGE HAUL PULLERS . . . .
BARKING
Drums (Coupling Connected) . .
Mechanical . . . . . . . . . . . . . . .
BAR SCREENS (Sewage) . . .
BATCHERS (Textile) . . . . . . .
BELT CONVEYORS
Heavy Duty . . . . . . . . . . . . . . .
BELT FEEDERS . . . . . . . . . . .
BENDING ROLLS (Machine)
BLOWERS
Centrifugal . . . . . . . . . . . . . . .
Lobe . . . . . . . . . . . . . . . . . . . .
Vane . . . . . . . . . . . . . . . . . . . .
BOTTLING MACHINERY . . .
BREWING . . . . . . . . . . . . . .
BRICK PRESS (Clay Working)
BRIQUETTE MACHINES
(Clay Working) . . . . . . . . . .
BUCKET
Conveyors Uniform . . . . . . . . . .
Conveyors Heavy Duty . . . . . . .
Elevators Continuous . . . . . . . .
Elevators Uniform . . . . . . . . . . .
Elevators Heavy Duty . . . . . . . .
CALENDERS
Rubber and Plastic . . . . . . . . . .
Textile . . . . . . . . . . . . . . . . . . .
CANE KNIVES . . . . . . . . . . .
CAN FILLING MACHINES . .
CARD MACHINES (Textile) .
CAR DUMPERS . . . . . . . . . .
CAR PULLERS . . . . . . . . . . .
CEMENT KILNS . . . . . . . . . .
CENTRIFUGAL
Blowers, Compressors,
Discharge Elevators,
Fans or Pumps . . . . . . . . . . . .
CHAIN CONVEYORS
Heavy Duty . . . . . . . . . . . . . . .
CHEMICAL FEEDERS
(Sewage) . . . . . . . . . . . . . .
CLARIFIERS . . . . . . . . . . . . .
CLASSIFIERS . . . . . . . . . . . .
CLAY WORKING . . . . . . . . .
COLLECTORS (Sewage) . . .
COMPRESSORS
Centrifugal . . . . . . . . . . . . . . .
Lobe . . . . . . . . . . . . . . . . . . . .
Reciprocating
Multi-Cylinder . . . . . . . . . . . . .
Single-Cylinder . . . . . . . . . . . .
CONCRETE MIXERS
Continuous . . . . . . . . . . . . . . .
Intermittent . . . . . . . . . . . . . . . .
Service
Industry
CONVEYORSUniformly
loaded or Fed:
Apron or Bucket . . . . . . . . . . . . 1.25 1.50
Assembly, Belt, Chain, Flight,
Oven, Screw . . . . . . . . . . . . . . 1.25 1.25
CONVEYORSHeavy
Duty. Not Uniformly Fed
Apron, Assembly, Belt, Bucket,
Chain, Flight, Oven, Screw . . . . 1.25 1.50
CONVEYORSSevere Duty
Live Roll . . . . . . . . . . . . . . . . . . Refer to Factory
Reciprocating Shaker . . . . . . . . 1.5
2.00
COOKERS (Brewing &
Distilling), (food) . . . . . . . . .
1.25 1.25
COOLING TOWER FANS . . Refer to Factory
CRANES
Dry Dock Cranes, Main Hoist,
Bridge and Trolley Travel . . . . . . Refer to Factory
CRUSHERS
Ore or Stone . . . . . . . . . . . . . . 1.75 2.00
Sugar . . . . . . . . . . . . . . . . . . . . . .
1.75
DEWATERING SCREENS
(Sewage) . . . . . . . . . . . . . .
1.50 1.50
DISC FEEDERS . . . . . . . . . .
1.25 1.25
DISTILLING . . . . . . . . . . . . .
See Table 2
DOUBLE ACTING PUMPS
2 or more Cylinders . . . . . . . . . 1.25 1.50
Single Cylinder . . . . . . . . . . . . . Refer to Factory
DOUGH MIXER (Food) . . . .
1.25 1.50
DRAW BENCH (Metal Mills)
Carriage & Main Drive . . . . . . 1.25 1.50
DREDGES . . . . . . . . . . . . . .
See Table 2
DRY DOCK CRANES . . . . . . Refer to Factory
DRYERS & COOLERS (Mills.
...
1.50
Rotary) . . . . . . . . . . . . . . . .
DYEING MACHINERY
(Textile) . . . . . . . . . . . . . . . .
1.25 1.50
ELEVATORS
Bucket-Uniform Lood . . . . . . . . 1.25 1.50
Bucket-Heavy Duty . . . . . . . . . . 1.25 1.50
Bucket-Continuous . . . . . . . . . . 1.25 1.50
Centrifugal Discharge . . . . . . . . 1.25 1.25
Escalators . . . . . . . . . . . . . . Not Approved
Freight . . . . . . . . . . . . . . . . . Not Approved
Gravity Discharge . . . . . . . . . . . 1.25 1.25
Man Lifts, Passenger . . . . . . . Not Approved
EXTRUDERS
(Plastic & Rubber) . . . . . . . .
See Table 2
FANS
Centrifugal . . . . . . . . . . . . . . . 1.25 1.25
Cooling Towers . . . . . . . . . . . . Refer to Factory
Forced Draft . . . . . . . . . . . . . . . . . .
1.25
Induced Draft . . . . . . . . . . . . . . 1.50 1.50
Large (Mine. etc.) . . . . . . . . . . . 1.50 1.50
Large lndustrial . . . . . . . . . . . . 1.50 1.50
Light (Small Diameter) . . . . . . . . 1.25 1.25
FEEDERS
Apron. Belt . . . . . . . . . . . . . . . 1.25 1.50
Disc . . . . . . . . . . . . . . . . . . . . 1.25 1.25
Reciprocating . . . . . . . . . . . . . . 1.75 2.00
Screw . . . . . . . . . . . . . . . . . . . 1.25 1.50
FLIGHT CONVEYORS
Uniform . . . . . . . . . . . . . . . . . . 1.25 1.25
Heavy . . . . . . . . . . . . . . . . . . . 1.25 1.50
FOOD INDUSTRY . . . . . . . .
See Table 2
GENERATORS (Not Welding) 1.25 1.25
GRAVITY DISCHARGE
1.25 1.25
ELEVATORS . . . . . . . . . . . . .
HAMMER MILLS . . . . . . . . .
1.75 2.00
1.25
1.25
1.25
1.25
1.50
1.50
1.25
1.25
1.25
1.50
1.50
1.50
1.25
1.25
1.25
1.50
1.75
2.00
...
...
1.25
1.25
2.00
2.00
1.25
1.50
1.25
1.25
1.25
1.25
1.25
1.50
1.50
1.50
See Mills. Rotary
1.25 1.25
1.25 1.50
1.25 1.50
1.25 1.25
See Table 2
1.75 2.00
1.75
2.00
1.25
1.25
1.25
1.25
1.25
1.50
1.50
1.50
1.50
1.50
See Table 2
1.25 1.50
...
1.75
1.25 1.25
1.25 1.50
1.75 2.00
1.25 1.50
See Mills. Rotary
1.25
1.25
1.25
1.25
1.25
1.50
1.25 1.25
1.25 1.25
1.25 1.50
See Table 2
1.25 1.25
1.25
1.25
1.25
1.50
1.50
1.75
1.75
2.00
1.25
1.25
1.50
1.50
3 to Over
10
10
Hour Hour
Industry
Service
Service
3 to Over
10
10
Hour Hour
3 to Over
10
10
Hour Hour
HOISTS
Heavy Duty . . . . . . . . . . . . . . 1.75 2.00
Medium Duty . . . . . . . . . . . . . 1.25 1.50
Skip Hoist . . . . . . . . . . . . . . . 1.25 1.50
INDUCED DRAFT FANS . . . 1.50 1.50
KILNS . . . . . . . . . . . . . . . . . See Mills. Rotary
LAUNDRY WASHERS . . . . . . 1.50 2.00
LAUNDRY TUMBLERS . . . . . 1.25 1.50
LINE SHAFTS
Driving Processing Equipment . 1.25 1.50
Other Line Shafts, Light . . . . . . 1.25 1.25
LIVE ROLL CONVEYORS . . . Refer to Factory
LOBE BLOWERS OR
COMPRESSORS . . . . . . . . . . 1.25 1.50
LOG HAULS (Lumber)
Incline-well Type . . . . . . . . . . . 1.75 1.75
LOOMS (Textile) . . . . . . . . . 1.25 1.50
LUMBER INDUSTRY . . . . . . .
See Table 2
MACHINE TOOLS
Auxiliary Drives . . . . . . . . . . . . 1.25 1.25
Bending Rolls . . . . . . . . . . . . . 1.25 1.50
Main Drives . . . . . . . . . . . . . . 1.25 1.50
Notching Press (Belted) . . . . . . Refer to Factory
Plate Planers . . . . . . . . . . . . . 1.75 2.00
Punch Press (Geared) . . . . . . . 1.75 2.00
Tapping machines . . . . . . . . . 1.75 2.00
MANGLE (Textile) . . . . . . . . 1.25 1.50
MASH TUBS (Brewing &
Distilling) . . . . . . . . . . . . . . 1.25 1.25
MEAT GRINDERS (Food) . . . 1.25 1.50
METAL MILLS
Draw Bench Carriages &
Main Drives . . . . . . . . . . . . . 1.25 1.50
Pinch, Dryer & Scrubber
Rolls, Reversing . . . . . . . . . . Refer to Factory
Slitters . . . . . . . . . . . . . . . . . . 1.25 1.50
Table Conveyors.
Non-Reversing Group Drives . 1.50 1.50
Non-Reversing Individual
Drives . . . . . . . . . . . . . . . . . 2.00 2.00
Reversing . . . . . . . . . . . . . . . Refer to Factory
Wire Drawing & Flattening
Machines . . . . . . . . . . . . . . 1.25 1.50
Wire Winding Machines . . . . . 1.50 1.50
MILLS. ROTARY
Ball and Rod Mills
with Spur Ring Gear . . . . . . . . . .
2.00
with Helical Ring Gear . . . . . . . .
1.50
Direct Connected . . . . . . . . . . . . .
2.00
Cement Kilns, Dryers & Coolers 1.50
Pebble, Plain & Wedge Bar Mills . . .
1.50
Tumbling Barrels . . . . . . . . . . . 1.75 2.00
MIXER (Also see Agitators)
Concrete, Cont. & lnt. . . . . . . . 1.25 1.50
Constant Density . . . . . . . . . . 1.25 1.50
Variable Density . . . . . . . . . . . 1.25 1.50
NAPPERS (Textile) . . . . . . . . 1.25 1.50
OIL INDUSTRY . . . . . . . . . .
See Table 2
ORE CRUSHERS . . . . . . . . . 1.75 2.00
OVEN CONVEYORS
Uniform . . . . . . . . . . . . . . . . . 1.25 1.25
Heavy Duty . . . . . . . . . . . . . . 1.25 1.50
PAPER MILLS . . . . . . . . . . . .
See Table 2
PASSENGER ELEVATORS Not Approved
PEBBLE MILLS . . . . . . . . . . .
...
1.50
PLATE PLANERS . . . . . . . . . 1.75 2.00
PRINTING PRESSES . . . . . . . Refer to Factory
PROPORTIONING PUMPS . . 1.25 1.50
PUG MILLS (Clay) . . . . . . . . 1.25 1.50
Industry
PULLERS (Barge Haul) . . . . . 1.75 2.00

PUMPS
Centrifugal . . . . . . . . . . . . . . . 1.25 1.25
Proportioning . . . . . . . . . . . . . 1.25 1.50
Reciprocating
Single Act., 3 or more Cyl. . . . 1.25 1.50
Double Act., 2 or more Cyl. . . 1.25 1.50
Single Act., 1 or 2 Cyl. . . . . . Refer to Factory
Double Acting, 1 Cyl. . . . . . . Refer to Factory
Rotary: Gear, Lobe, Vane . . . . 1.25 1.25
PUNCH PRESSES (Gear
Driven) . . . . . . . . . . . . . . . . 1.75 2.00
RECIPROCATING
Conveyors & Feeders . . . . . . . 1.75 2.00
RECIPROCATING
COMPRESSORS
MultI-Cylinder . . . . . . . . . . . . 1.50 1.75
Single Cylinder . . . . . . . . . . . . 1.75 2.00
ROD MILLS . . . . . . . . . . . . . See Mills.Rotary
ROTARY
Pumps . . . . . . . . . . . . . . . . . . 1.25 1.25
Screens (Sand or Gravel) . . . . . 1.25 1.50
RUBBER & PLASTICS
INDUSTRIES . . . . . . . . . . . . See Table 2
SAND MULLERS . . . . . . . . . 1.25 1.50
SCREENS
Air Washing . . . . . . . . . . . . . . 1.25 1.25
RotarySand or Gravel . . . . . 1.25 1.50
Traveling Water Intake . . . . . . . 1.25 1.25
SCREW CONVEYORS
Uniform . . . . . . . . . . . . . . . . . 1.25 1.25
Heavy Duty or Feeder
1.25 1.50
SCUM BREAKERS (Sewage) 1.50 1.50
SEWAGE DISPOSAL
See Table 2
SHAKER CONVEYORS
1.75 2.00
SHEETERS (Rubber)
...
1.50
SINGLE ACTING PUMP
I or 2 Cylinders . . . . . . . . . . . Refer to Factory
3 or more Cylinders . . . . . . . . 1.25 1.50
SKI TOWS & LIFTS . . . . . . Not Approved
SKIP HOIST . . . . . . . . . . .
1.25 1.50
SLAB PUSHERS . . . . . . . . . . 1.50 1.50
SLITTERS (Metal) . . . . . . . . . 1.25 1.50
SLUDGE COLLECTORS
(Sewage) . . . . . . . . . . . . . . 1.25 1.25
SOAPERS (Textile) . . . . . . . . 1.25 1.50
SPINNERS (Textile) . . . . . . . 1.25 1.50
STEERING GEARS . . . . . . . . Refer to Factory
STOKERS . . . . . . . . . . . . . . 1.25 1.25
STONE CRUSHERS . . . . . . . 1.75 2.00
SUGAR INDUSTRY . . . . . . . See Table 2
TABLE CONVEYORS
(Non-Reversing)
Group Drives . . . . . . . . . . . . . 1.50 1.50
Individual Drives . . . . . . . . . . . 2.00 2.00
Reversing . . . . . . . . . . . . . . . . Refer to Factory
TENTER FRAMES (Textile) . . 1.25 1.50
TEXTILE INDUSTRY . . . . . . . See Table 2
THICKENERS (Sewage) . . . . 1.50 1.50
TUMBLING BARRELS . . . . . . 1.75 2.00
VACUUM FILTERS (Sewage) 1.50 1.50
VANE BLOWERS . . . . . . . . . 1.25 1.50
WINCHES (Dredges) . . . . . . 1.25 1.50
WINDERS (Textile) . . . . . . . . 1.25 1.50
WINDLASS . . . . . . . . . . . . . Refer to Factory
WIRE
Drawing Machines . . . . . . . . . 1.25 1.50
Winding Machines . . . . . . . . . 1.50 1.50
ss Selection of Rexnord products for applications whose primary purpose is the transportation of people is not approved. This includes such applications as freight or passenger
elevators, escalators, man lifts, work lift platforms and ski tows and ski lifts.
If the primary purpose of the application is material conveyance and occasionally people are transported, the Factory warranty may remain in effect provided the design load
conditions are not exceeded and certification to the appropriate safety codes and load conditions has been obtained by the system designer or end user from the appropriate
enforcement authorities.
Contact the Factory for proper selection of a mixer drive.
12 (161-110)
How to Select/ Formula Method
Before making a selection, refer to Basic Information and Conditions Affecting Selection on Pages 9 and 10.
Information Required
The following basic information is required to select a Drive One
gear drive for your application.
Prime Mover Data
Type electric or hydraulic motor or engine
Power rating in kW or hp
Speed constant or variable
Dimensions if the Factory will furnish motor mounting
accessory or coupling
Driven Machine Data
Type conveyor, kiln, etc.
Power demand in kW, or hp, or equivalent torque.
Speed and direction of rotation
Service Hours per day; reversals per minute if reversing;
minutes per hour (duty cycle) if not continuous
Gear Drive Data
Type parallel shaft or right angle
Horizontal or vertical output shaft
Ambient temperature at drive location
Altitude above sea level
Ambient air velocity at drive location
Mounting position if inclined or non-standard orientation
Shaft Connections
Shaft diameters and key sizes
Overhung loads provide full description of sheave, sprocket,
or pinion
Thrust load and direction
Power Selection Method

The power selection method is based on the power rating of the
prime mover.
1. Determine the mechanical service factor.
Electric motor driven applications, see Tables 2 & 3, Pages 11
& 12.
Engine driven or intermittent applications, see Table 1, Page
11.
2. Calculate equivalent power by multiplying the rated power of
the prime mover by the mechanical service factor determined in
Step 1.
3. Determine gear drive nominal ratio.
Divide the high speed shaft rpm by the low speed shaft rpm to
determine your ideal ratio. Choose a nominal ratio that most
closely approximates your ideal ratio. Nominal ratios are found
in the power ratings tables, see Step 4.
4. Using the equivalent power determined in Step 2, and the gear
drive nominal ratio that most closely approximates the ideal
ratio determined in Step 3, select the gear drive size using the
Power Ratings Tables.
Power Ratings Tables:
Parallel shaft gear drives, see Pages 26 thru 35 & 154.
Right angle shaft drives, see Pages 108 thru 113 & 159.
Locate the proper page within the power ratings tables based
on nominal ratio and high speed shaft rpm. Once on the
proper page, go to the portion of the table associated with your
high speed shaft rpm, and using the appropriate nominal ratio,
trace to the right through the columns. Determine the column
of the first power rating that equals or exceeds the equivalent
power determined in Step 2. The size of the gear drive selected
is at the top of the column. Once a gear drive size has been
selected, an exact ratio can be determined from the exact ratio
tables.
5. Check thermal rating using procedures outlined on Page 14.
The application adjusted thermal rating of the cooling method
selected must equal or exceed the actual power transmitted.
6. When overhung loads or thrust loads are present, check to
assure they are within the capacity of the gear drive selected.
Overhung load (radial load) is imposed by sheaves, sprockets,
and open pinions that are mounted directly on the shaft
extensions of the gear drive. Gear drive shaft extensions that
are flexible coupling connected need not be checked for
overhung load, flexible couplings do not impose significant
overhung load.
Refer HS shaft overhung load applications to the Factory.
Thrust load (axial load) applied to the gear drive is unusual.
In these applications, the magnitude of the thrust load, and
the direction of thrust load, is supplied by the system designer.
Thrust loads must be within the published capacity of the gear
drive.
Refer thrust load applications to the Factory.
Complex shaft loadings involving simultaneous application of
overhung load, thrust load, or bending moment (as in mixers
and agitators) should be referred directly to the Factory.
Torque Selection Method

For convenience, low speed shaft torque ratings of gear drives are
provided, and a purely mechanical selection of a gear drive can
be made using torque values. Simply follow the steps outlined in
the power selection method, substituting torque values for power
values. In order to check thermal adequacy, and check shaft
ratings, it will be necessary to convert the torque to power using
the formula below:
Input Power (Hp) = Torque (lb-in) x Output Speed (rpm)

63025
Example Selections
An example using the Power Selection Method and an example
using the Torque Selection Method is found on Page 15.
(161-110) 13
Thermal Factors & Procedures

Checking Thermal Rating
For the gear drive you have selected mechanically, choose an

auxiliary cooling method whose application adjusted thermal
rating equals or exceeds the actual power transmitted. If no listed
cooling method is adequate, contact the Factory for selection of
an optional heat exchanger, or consider a larger gear drive with
greater thermal capacity.
Checking the thermal rating is extremely important. If the gear

drives capacity to dissipate thermal energy is insufficient, it will
overheat, and severe damage may occur.
Gear drive basic thermal ratings are defined on Page 9. A
discussion of application adjusted thermal rating, and when it is
applicable, is found on Page 10.
TABLE 1 Ambient Temperature Factor B1

(For all cooling methods)
Thermal Rating Factors
59F
68F
77F
86F
95F
104F
113F
122F
Application Adjusted Thermal Rating

Once a mechanically adequate gear drive selection has been
made per Steps 1-4 on Page 13, determine the application
adjusted thermal rating of the gear drive. The application adjusted
thermal rating of the gear drive selected must equal or exceed the
actual power transmitted.
In most cases, the nameplate power rating of the motor is
assumed to equal the actual power transmitted. It is not necessary
to apply the mechanical service factor when determining thermal
adequacy of a gear drive.
Use the following formula to determine application adjusted
thermal rating:
PTA = PT x B1 x B2 x B3 x B4 x B5 x B6 where:
PTA = Application Adjusted Thermal Rating
PT = Basic Thermal Rating
B1 = Ambient Temperature Factor (Table 1)
B2 = Altitude Factor (Table 2)
B3 = Ambient Air Velocity Factor (Table 3)
B4 = Duty Cycle Factor (Table 4)
B5 = Orientation Factor (Table 5)
B6 = Inlet water temperature factor from Table 6 (used only

when cooling tubes are selected)
Basic Thermal Ratings for parallel shaft gear drives are found on
Pages 36-61.
Basic Thermal Ratings for right angle shaft gear drives are found
on Pages 114-125.
++ Factors for other ambient temperatures can be interpolated.
TABLE 2 Altitude Factor B2
(For air cooled methods, no cooling tubes)
Altitude Above Sea Level Feet

0
2461
4922
7382
9843
12304
14765
17225
(For no auxiliary cooling)
Sustained Ambient Air Velocity

ft/sec
< 1.6
1.6 to 4.6
4.6 to 12.1
> 12.1
Installed
Environment
Factor for no
Auxiliary Cooling
Confined Space
Large Indoor Room
Large Indoor Room
Outdoors
0.75
1.00
1.40
1.90
The sustained ambient air velocity must be a continuous flow of air directly onto
the gear drive. If the air flow cannot be relied upon to be continuous, an ambient
air velocity factor of 1.00 must be used.
TABLE 4 Duty Cycle Factor B4

% Operating Time Per Hour
100%
80%
60%
40%
20%
(For drives with cooling tubes only)
Inlet Water Temperature

50F
60F
70F
80F
90F
100F
Factor
1.00
0.95
0.90
0.85
0.81
0.76
0.72
0.68
TABLE 3 Ambient Air Velocity Factor B3
TABLE 6 Inlet Water Temperature Factor B6

Factor with no Auxiliary Cooling

or with Fan
1.12
1.06
1.00
0.94
0.88
0.81
0.74
0.66
Ambient Temperature
Thermal horsepower ratings published herein are based on a

77F(25C) ambient temperature at sea level. For other conditions,
the thermal horsepower rating must be multiplied by the factors
shown in Tables 1 & 2.
Factor with Cooling Tubes Only

1.11
1.05
1.25
.94
.88
.83
Factor With or Without Auxiliary Cooling

1.00
1.05
1.15
1.35
1.80
The duty cycle factor must be based on the percentage of each hour that the drive
is operating. For example: a gear drive operating for 48 minutes of every hour of
the day has an 80% duty cycle, but a drive operating for 4 hours and resting for 4
hours has a 100% duty cycle. Where the % Operating Time Per Hour falls between
values tabulated above, use the next higher % Operating Time.
TABLE 5 Orientation Factor B5 - Horizontal Output Drives Only

HS Shaft at Same Height as LS Shaft
HS Shaft over LS Shaft
1st Int Shaft

over HS Shaft
LS Shaft over HS Shaft
Input
Speed
rpm
DH2
1750
1430
1170
970
870
720
580
DH3
1.00
1.00
1.00
1.00
1.00
1.00
1.00
DB3
DH2
DH3
0.57
0.66
0.74
0.79
0.82
0.83
0.90
DZ3
DH2
DH3
DZ3
DH3
0.29
0.45
0.58
0.68
0.73
0.80
0.87
NOTE: For single reduction (DH1) drives, any orientation other than standard horizontal mounting, requires engineering review and approval. Contact the Factory with complete
application details.
14 (161-110)
Power Selection Example
Torque Selection Example
A draw bench operates 10 hours per day. The gear drive required
for the application is driven at the high speed shaft by a 100 HP
electric motor at 1170 RPM. A low speed shaft speed of 42 RPM
at the gear drive has been requested.
Ambient temperature at the draw bench never exceeds 80 F. The
draw bench is located in a small indoor room, with air flow less
than 1.6 feet per second. Altitude above sea level is 1000 feet.
The high speed and low speed shafts of the selected gear drive
will be connected to the driving and driven equipment by flexible
couplings. Select a base-mounted parallel shaft gear drive for this
application as follows:
1. The mechanical service factor is 1.25 for a draw bench drive
operating 10 hours per day, from Page 12, Table 3 (Metal
Mills).
2. The equivalent power in HP = 1.25 x 100 = 125 HP.
3. The ideal ratio is 1170 42 = 27.86. The closest nominal
ratio is 28.0:1 from the Double Reduction Power Ratings Table
on Page 28.
4. Using the Double Reduction Power Ratings Table on Page 28,
and in the section associated with a nominal ratio of 28.0:1,
trace right through the columns to the first power rating that
equals or exceeds the equivalent power of 125 HP calculated
in Step 2. The selection is a size M1160 (shown at the top of
the column) that has a power rating of 143 HP.
Actual mechanical service factor is 143 100 = 1.43.
Exact ratio is 27.36:1, found on Page 69 (exact ratio table)
5. Check thermal rating. The application adjusted thermal rating
must equal or exceed the actual power transmitted (100HP).
Basic thermal rating for the size M1160DH2, nominal ratio
28:1, high speed shaft at 1170 RPM, no auxiliary cooling,
equals 201 HP, per Page 44.
Thermal factors from Page 14 for no auxiliary cooling are as
follows:
B1 = Ambient Temperature Factor from Thermal Table 1 =
1.00
B2 = Altitude factor from Thermal Table 2 = 1.00
B3 = Ambient Air Velocity Factor from Thermal Table 3 = 0.75
B4 = Duty Cycle Factor from Thermal Table 4 = 1.00
B5 = Orientation factor from Thermal Table 5 = 1.00
Application Adjusted Thermal rating with no auxiliary
cooling = 201 x 1.00 x 1.00 x 0.75 x 1.00 x 1.00 = 151
THP
Application Adjusted Thermal rating does equal or exceed the
100 HP transmitted, no auxiliary cooling is required.
6. It is not necessary to check overhung load or thrust capacity
of the gear drive for this example. Gear drive shaft extensions
are connected by flexible couplings, which do not impose
significant overhung load. No thrust load is present.
A dredge utility winch requires 200,000 Lb.-in. of torque at its

output shaft, which operates at 16 RPM. The winch is in service 8
hours per day and is driven by a coupling-connected 60 HP, 1750
RPM electric motor. The ambient temperature never exceeds 75 F.
The approximate air velocity is 10 feet per second, and the dredge
operates in the North Sea (sea level). The winch never operates
more than 30 minutes in a given hour. The space available is best
suited to a base mounted right angle gear drive. Select a gear
drive for this application.
1. The Service Factor is 1.25 for a dredge utility winch operating
10 hours per day, from Page 11, Table 2 under Dredges.
2. The equivalent torque is 1.25 x 200,000 = 250,000 Lb.-in.
3. The ideal ratio is 1750 16 = 109.4:1. The nearest standard
nominal ratio is 112:1 from the Right Angle Triple Reduction
Table on Page 110.
4. Using the Triple Reduction Table on Page 110, in the 1750
RPM high speed shaft section and at the 112:1 ratio and 16
RPM, trace right to 337 (x 1000, the first torque exceeding the
equivalent torque of 250,000 Lb.-in.) and read the drive size
M1170 at the top of the column.
5. The basic thermal capacity with no auxiliary cooling for an
M1170DB3, 112:1, at 1750 RPM from the table on Page 115
is 126 HP. The ambient temperature factor (B1) from Table 1,
Page 14, is 1.00. The altitude factor (B2) from Table 2, Page
14 is 1.00. The ambient air velocity factor (B3) is 1.4 from
Table 3, Page 14. The Duty Cycle is 50% (30 min / hour), so
the duty cycle factor (B4) is 1.15 from Table 4, Page 14. The
Orientation factor (B5) is 1.00, from Table 5, Page 14.
6. The application adjusted thermal capacity is 126 x 1.00 x 1.00
x 1.40 x 1.15 x 1.00 = 202.9 HP, which exceeds the power
rating of the motor (60 HP). Therefore, no additional cooling is
required.
7. It is not necessary to check overhung load or thrust capacity
of the gear drive for this example. Gear drive shaft extensions
are connected by flexible couplings, which do not impose
significant overhung load. No thrust load is present.
(161-110) 15
Accessory & Option Information

Shaft Driven Cooling Fans
See Pages 173-178
Cooling Tubes - Single Reduction Drives Only

See Page 186
Shaft driven cooling fans provide a simple and inexpensive way

to utilize the full mechanical rating of gear drives by lowering the
operating temperatures, thus increasing thermal power capacity.
Cooling fans have been successfully used on electric motors and
other related machinery for many years. They eliminate the need
for water or electrically powered cooling, pumps, and external
piping. The sound level at standard motor rpm is about the same
as that from fans on totally enclosed, fan cooled driving motors.
Less than 0.25% of cataloged power rating is required to drive the
fans. Shaft driven fans are available for use with DH parallel shaft
drives, DB & DZ right-angle drives and also DX vertical drives.
Dimensions, arrangements, and clearances for shaft driven fans
are shown in this selection guide.
For applications requiring fan cooling and two usable H.S. shaft
extensions (with inching drives, emergency drives, etc), consult the
Factory.
Cooling tubes are an economical alternative for thermal

requirements that are beyond the capability of fans. A series of
straight, finned tubes are provided directly in the oil sump of the
drive. Water is circulated through these tubes to cool the oil. Since
there are no joints or connections inside the drive, leakage of
water into the oil sump is eliminated. The thermal ratings shown in
this selection guide are for 70F(21C) inlet water temperature.
Backstops
See Pages 192 & 193
Backstops prevent reverse rotation or backrun without backlash
for conveyors, elevator head shafts, and similar applications. The
Drive One backstop is a sprag type design.
The backstop shares the drive sump oil.
NOTE: DRIVES WITH BACKSTOPS MUST BE SELECTED WITH
A MINIMUM SERVICE FACTOR. SEE TABLE 1A, PAGE 11.
Pump & Coolers

See Pages 187-191
Electric Cooling Fans

See Pages 180-185
The integrated oil-to-air cooler is drive mounted at the Factory and

is shipped with both the lube suction and return lines connected
to the drive with flexible hose. Only one motor is required - this
dual output motor drives both the lube pump and cooling fan. The
motor is 230-460 Volts, 3 Phase, 50 or 60 Hertz. A thermostatic
bypass valve at the cooler regulates the flow of oil through the
cooler. Available options include flow switch, single and dual
filters.
Electric fans are unaffected by shaft rotation and speed, and

includes a thermostatic control to turn the fan off when it is not
required. The electric fan can be mounted on either end of a
parallel shaft drive, and on the L.S. end of a right angle drive.
This permits full use of available shaft extensions. Electric fans are
available with the following standard motor packages:
60 Hz, 3-Phase, 220/380 VAC
60 Hz, 3-Phase, 265/460 VAC
50 Hz, 3-Phase, 220/380 VAC
Other motor packages may be available at an extra charge.
Consult the Factory for price and availability.
Dimensions, arrangements, and clearances for electric fans are
shown in this selection guide. Additional information, including
motor ratings, and thermostatic control wiring diagrams are also
available from the Factory.
16 (161-110)

Motor Brackets
See Pages 198 & 199
Flange Motor Adapters

See Pages 196 & 197
Motor brackets may be used for Types DH and DB. These motor
brackets provide an economical soft mounting for standard
NEMA T-frame and IEC B3 induction motors. It is expected that
the weight, location, and starting torque of the motor will cause
cantilevered motor brackets to deflect or twist to varying degrees.
They are engineered to be within acceptable deflection limits as
determined by the Factory. However, because the motor bracket
is a soft motor support, deflection and vibration magnitudes of
the bracket may exceed levels normally considered acceptable for
rigidly, hard mounted machinery.
Flanged motor adapters are available for Types DH and DB

drives. This adapter allows a flange-mounted motor to be directly
mounted to the high speed side of the drive.
Bedplates
Motor Mounts
See Page 202
Motor mounts are selectively pre-designed for Types DH and DB
drives. Motor mounts provide a convenient drive support for the
motor when the drive is belt driven.
For detailed information on motor mounts, contact the Factory.
A bedplate is recommended to insure proper alignment of a base

mounted drive with the motor. The Factory can provide fabricated
steel bedplates for all popular sizes of standard type DH and
DB drives. These bedplates accommodate standard NEMA and
IEC motors within the power range of the drive and many of the
larger non-NEMA motors. Special bedplates can be designed
and manufactured for unique motor and special accessory
combinations.
Supports for tachometers, brakes, timing devices, foot-mounted
fluid couplings, or other accessories can be added. Contact the
Factory for further details on this accessory.
Swing Base
See Pages 200 & 201
Swing bases have been pre-engineered for over 1000
combinations of Drive One, NEMA & IEC motors, and Falk
couplings. Finite element analysis has been performed to assure
trouble-free operation. Designed specifically for use with the
DBT right angle shaft mounted drive, the swing base provides an
economical and readily available alternative to bedplates.
Couplings and Coupling Guards

Rexnord offers a complete line of coupling products, including:
Falk Steelflex Grid Couplings
Falk Lifelign Gear Couplings
Falk Wrapflex and Rex Omega Elastomer Couplings
Rex Thomas Disc Couplings
Falk True Torque Fluid Couplings
In addition, Rexnord offers an unmatched variety of Orange Peel
coupling guards, meeting OSHA and ANSI safety standards for
guarding of rotating equipment
(161-110) 17

TA Taper Bushings
See Page 168
Available with both inch and metric bores, the TA Taper ductile
iron bushings provide for easy-on easy-off shaft mounting
convenience for hollow shaft drives.
Torque Arms
See Page 200, 201 & 204
Torque arms are available for all shaft mounted Drive One sizes,
both DH and DB. They are used to support the drive in a standard
horizontal position, and are suitable for use on swing bases,
bedplates, Alignment-Free, or mounted directly to the drive. The
customer is responsible for determining the structural integrity of
their support structure.
Standard Seals
All shaft extensions have a standard taconite seal arrangement
consisting of two seals with an external, purgeable grease barrier
to prevent abrasive contaminants from reaching the seal lips.
18 (161-110)
Shaft Mounting Options

In addition to the TA taper bushing described at left, shaft
mounting options include hollow shaft with shrink disc and solid
shaft with rigid flange connection.
Tie Rods
See Page 194 & 195
Designed for use with DHT parallel shaft drives, this torque arm
consists of two rod ends and a turnbuckle, allowing for some
length adjustment.
Oil Sight Gauge & Oil Drain Valve

See Page 207
Provided at the low speed end of the drive. The oil sight gauge
allows for quick visual confirmation of correct lubrication levels
and the oil drain ball valve simplifies oil changes.

Inching Drives
Vertical Drive Features

See Pages 94-105 & 144-151
Vertical drives are equipped as standard with a motor-driven lube
pump. Also included are a filter and a flow gauge with switch to
ensure continuous flow of clean oil to bearings and gears. For
positive prevention of oil leaks from vertical down shafts, drive
Types DVA, DVM, DXA, and DXM include an internal drywell.
Vertical drive options include a ball valve drain and a standpipe
oil sight.
Inching drives packages are available for inspection of belts,

buckets and for cold weather creeping of conveyors. Contact the
Factory for selections and details.
Motor Driven
Lube Pump
Flow Gauge
Oil Filter
Standard
Motor-Driven Lube Pump
Oil Filter
Flow Gauge with Switch
AirMax Breather & Sealed Dipstick

See Page 208
The AirMax breather gives moisture and particulate protection
for enclosed gear drives. A sealed dipstick is required for the
accessory.
Optional
Ball Valve Drain
Oil Sight
Drywell
Standard on:
DVA, DVM, DXA & DSM
(161-110) 19
Drive One Nomenclature

M
Shaft
Dim.
Standard
Series
Drive Sizes
Product Type
Assembly Code
Ratio Code
Model
Shaft Dimensional Standard

M = Standard metric input and output shafts (diameter/bore,

length, key & keyway)
Series
1000 Series
Reductions
P = Planetary Secondary, Hollow LS Shaft with Shrink Disc
R = Planetary Secondary, Solid LS Shaft, for Flange Mounting
B = Planetary Secondary, Solid LS Shaft, for Foot Mounting
F = Planetary Secondary, Solid LS Shaft, Moment Connection
L = Low Ratio / High Thermal, Solid LS Shaft
Reductions
Drive Sizes
Number of reductions/Stages in gear drive
130 thru 250
Model
Product Type
Model Code 1
D = Drive One designation
Initial Model A. Subsequent models B, C, D, etc.
Input Shaft/Output Shaft Configuration
H = Parallel, horizontal L.S. shaft

B = Right angle, horizontal L.S. shaft (input & output shafts in
same plane)
Z = Right angle, horizontal L.S. shaft (input & output shafts not
in same plane)
V = Parallel, vertical L.S. shaft
X = Right angle, vertical L.S. shaft (input & output shafts in
same plane)
Output Shaft Type
C = Solid shaft (cylindrical OD) - All sizes

T = Hollow shaft (tapered ID)
Q = Hollow shaft, straight bored & keyed, with keeper plate
J = Hollow shaft, keyless, with shrink disc
A = Solid shaft with oversize OD and increased bearing span
(Agitator design), includes drywell
M = Hollow shaft, straight bored and keyed with keeper plate,
with increased bearing span (Mixer design), includes
drywell
T
PARALLEL SHAFT
VERTICAL OUTPUT
R
N = Having no special features or housing rework

R = Having housing reworked for standard option (e.g.
backstop, etc.)
S = Having special feature or features
Ratio Code
Exact ratio expressed as (5) characters including decimal point
Examples: 1.321:1, 14.95:1, 155.7:1, 1196.:1.
Assembly Code
Assembly Code 1 - Housing/Shaft Orientation
T = Horizontal LSS - (HSS above LSS)

R = Horizontal LSS - (HSS right or left of LSS, Inspection cover
down)
B = Horizontal LSS - (HSS below LSS)
L = Horizontal LSS - (HSS right or left of LSS, Inspection cover up)
D = Vertical LSS - L.S. shaft down
U = Vertical LSS - L.S. shaft up
Assembly Code 2 - Mounting Arrangement
HOUSING/SHAFT ORIENTATION
PARALLEL SHAFT
HORIZONTAL OUTPUT
Model Code 2
A, B, C, D, E, F = Mounted via A, B, C, D, E, F, housing face

(see housing faces)
J = Shaft Mounted Drive (Parallel shaft)
H = Alignment Free Drive (Right angle shaft)
Assembly Code 3, 4, 5, 6 - Assembly Number
B
T
STANDARD RIGHT ANGLE

VERTICAL OUTPUT
STANDARD RIGHT ANGLE

HORIZONTAL OUTPUT
L
See assembly figures

B
MOUNTING ARRANGEMENT
ALTERNATE RIGHT ANGLE

HORIZONTAL OUTPUT
F (Opposite Std Bevel Bore)

E
R
B
20 (161-110)
ALTERNATE RIGHT ANGLE

VERTICAL OUTPUT
D (Opposite Cover)
How to Order
The following information is required to order a Drive One

gear drive to meet your application requirements. Much of the
information listed below is also used to make a selection and is
repeated here in the event a selection will be made by the district
office. Note that it is not necessary to specify nomenclature, as
described on Page 20, when ordering a Drive One gear drive.
Gear Drive
Size, type and ratio.
High Speed Shaft rpm and Low Speed Shaft rpm.
Service Factor.
External shaft loads thrust and overhung load.
Factors affecting thermal performance ambient temperature,
altitude, ambient air velocity, duty cycle, gear drive orientation
and inlet water temperature (if cooling water is to be used).
Auxiliary equipment required couplings, backstops, etc.
Mounting position and shaft assembly number (see Pages 22-25
for parallel shaft drives and Pages 106 & 107 for right-angle
drives).
Motor Prime Mover

Type motor or engine.
Power rating hp .
Speed rpm.
Frame size dimension prints if the Factory is to furnish
mounting surface and/or mount the equipment.
Motor type, class, weight, or any special characteristics (such
as brake motor, explosion-proof, etc.).
Identify if motor is to be furnished or installed by the Factory.
Driven Machine
Required power or torque.
Speed rpm.
Application description belt conveyor, agitator, etc.
Service duty cycle, hours per day, reversals per minute if
reversing.
Ambient temperature and operating conditions outdoor,
taconite dust, etc.
Auxiliary Equipment Furnished By The Factory

Motors if the Factory is to furnish, provide complete
specifications.
Bedplates supply drawing of motor and any auxiliary
equipment not supplied by the Factory.
Flange motor adapters or motor brackets supply drawing of
motor.
Motor mount supply drawing of motor and the required belt
centers and mounting arrangement.
Backstops specify direction of rotation of the low speed
shaft (CW or CCW) when facing the drive from the end of
the exposed low speed shaft extension. Also specify backstop
location (right or left side facing HS end).
NOTE: DRIVES WITH BACKSTOPS MUST BE SELECTED
WITH A MINIMUM SERVICE FACTOR. SEE TABLE 1A, PAGE
11.
Electric fan position, Hz and volts.
Couplings specify size, type, drive and driven hub bores and
keyways.
Coupling guards furnish description of couplings and/or other
equipment to be guarded, and all dimensions A through G
below.
Swing base supply frame size or drawing of the motor and HS
coupling size or shaft gap.
A
C
B
G
B & E ... Max Cplg Dim

D & F ... Exposed Shaft
Special or specification requirements

Advise the Factory of any special project related specifications such
as: noise level specifications, bearing L10 requirements, etc.
(161-110) 21
Type DHL Parallel Shaft
Shaft Assemblies & Rotations
Please specify from the views below, the desired assembly number. Contact the Factory for inclined, wall mounted, or other non-standard
orientations.
Type DHL Assemblies

Standard Assemblies
0016
0025
Type DHL Relative Shaft Rotations

0016
22 (161-110)
0025
If the input shaft rotation is

opposite the rotation shown,
the output shaft rotation will
also be opposite the rotation
shown.
Type DHC Parallel Shaft
orientations.
Type DHC Assemblies

Standard Assemblies
0015
0016
0025
0026
0125
0126
Other Available Assemblies
0156
0256
1256
Type DHC1 Relative Shaft Rotations
0015
0016
0025
0026
0125
0126
0156
0256
1256

shown.
0015
0016
0025
0015
0016
0025
0026
0125
0126
0026
0125
0126
0156
0256
1256
0156
0256
1256
(161-110) 23
Type DHT, DHJ, DVA & DVC Parallel Shaft
orientations.
Type DHA & DVC Assembly
Type DVC Assembly
0025
016X
Type DHT Assemblies
Type DHJ Assemblies

Standard Assemblies
Standard Assemblies
0016
0025
0016
0025
0125
0126
0125
0126
Type DHT2 Relative Shaft Rotations
0016
0025
0125
0126
Type DHJ2 Relative Shaft Rotations

shown.
Type DHT3 Relative Shaft Rotations
24 (161-110)
0016
0025
0125
0126
Type DHJ3 Relative Shaft Rotations
0016
0025
0016
0025
0126
0126
0125
0125
Type DHQ Parallel Shaft
orientations.
Type DHQ Assemblies

Standard Assemblies
0015
0016
0025
0026
0125
0126
Type DHQ2 Relative Shaft Rotations
0015
0026
0016
0125
Type DHQ3 Relative Shaft Rotations
0025
0126
0015
0016
0025
0026
0125
0126

shown.
(161-110) 25

Power Ratings Hp/Single Reduction
Torque Ratings lb-in/Single Reduction
High
Approx
DRIVE SIZE
Speed Nom
LS
Shaft Ratio Shaft
rpm
rpm M1130 M1140 M1150 M1160 M1170
1.25 1400 272 342 589 827 1267
1.40 1250 254 328 589 823 1267
1.60 1094 225 303 589 785 1267
1.80 972 198 288 525 709 1173
2.00 875 175 272 465 667 1081
2.24 781 160 249 432 627 967
2.50 700 144 243 365 553 856
1750 2.80 625 126 229 327 487 751
3.15 556 114 195 287 430 685
3.55 493 98.5 154 202 311 561
4.00 438 86.1 136 202 270 456
4.50 389 75.5 120 179 268 411
5.00 350 68.4 115 156 246 407
5.60 313 60.8 101 156 230 340
1.25 1144 223 279 481 676 1036
1.40 1021 208 268 481 673 1036
1.60 894 184 248 481 641 1036
1.80 794 164 235 429 579 958
2.00 715 145 222 381 545 883
2.24 638 131 203 356 513 790
2.50 572 118 206 304 454 700
1430 2.80 511 104 191 272 403 613
3.15 454 93.0 162 239 358 564
3.55 403 81.4 126 165 270 480
4.00 358 71.0 118 165 221 373
4.50 318 62.2 97.7 155 221 357
5.00 286 56.3 97.7 128 214 338
5.60 255 50.1 88.1 128 191 295
1.25 936 186 229 394 553 847
1.40 836 170 220 394 551 847
1.60 731 150 203 394 525 847
1.80 650 134 193 357 474 784
2.00 585 118 182 318 446 723
2.24 522 107 166 297 422 649
2.50 468 96.5 171 252 379 579
1170 2.80 418 85.3 158 226 335 512
3.15 371 76.1 134 198 298 470
3.55 330 67.2 103 135 233 397
4.00 293 58.6 102 135 181 305
4.50 260 51.3 79.9 135 181 305
5.00 234 46.4 79.9 105 181 280
5.60 209 41.2 73.3 105 157 248
1.25 776 157 190 326 458 703
1.40 693 141 182 326 456 703
1.60 606 125 168 326 435 703
1.80 539 111 160 300 393 655
2.00 485 98.2 151 268 370 608
2.24 433 88.7 138 249 350 548
2.50 388 80.0 143 212 319 488
970 2.80 346 70.7 132 189 282 431
3.15 308 63.1 112 166 250 395
3.55 273 55.9 85.5 112 193 329
4.00 243 48.9 85.5 112 150 253
4.50 216 42.8 66.3 112 150 253
5.00 194 38.7 66.3 86.7 150 234
5.60 173 34.3 61.1 86.7 131 207
1.25 696 141 170 293 411 630
1.40 621 127 163 293 409 630
1.60 544 112 151 293 390 630
1.80 483 99.7 143 272 352 594
2.00 435 88.1 135 242 332 550
2.24 388 79.6 124 225 314 496
348 71.8 129 191 288 442
870 2.50
2.80 311 63.4 119 171 254 389
3.15 276 56.6 101 150 226 357
3.55 245 50.2 76.7 100 173 295
4.00 218 44.0 76.7 100 134 227
4.50 193 38.5 59.4 100 134 227
5.00 174 34.8 59.4 77.8 134 211
5.60 155 30.9 54.9 77.8 118 187
High
Approx
DRIVE SIZE
Speed Nom
LS
Shaft Ratio Shaft
rpm
rpm M1130 M1140 M1150 M1160 M1170 M1180 M1190 M1200
1.25 1400 12.4 15.3 26.4 37.2 56.8 77.6 89.9 140
1.40 1250 12.9 16.6 29.7 41.9 63.9 85.6 96.6 154
1.60 1094 12.9 17.5 34.4 45.0 71.9 89.5 101 174
1.80 972 12.8 18.6 34.5 46.4 75.8 95.1 106 175
2.00 875 12.8 19.3 34.0 48.7 76.7 100 114 179
2.24 781 12.9 20.2 34.7 50.7 78.0 103 119 209
2.50 700 12.9 21.9 33.3 50.1 77.7 87.5 123 202
1750 2.80 625 12.8 23.0 33.2 49.0 76.3 98.6 128 213
3.15 556 12.9 22.1 32.9 48.6 76.9 112 132 185
3.55 493 12.6 19.6 25.5 40.2 71.5 88.9 139 183
4.00 438 12.3 19.7 28.8 39.4 65.0 100 147 191
4.50 389 12.2 19.3 29.2 43.9 66.3 106 144 200
5.00 350 12.2 20.5 28.5 43.8 74.2 107 161 208
5.60 313 12.0 20.6 31.7 45.8 68.9 103 140 200
1.25 1144 12.4 15.3 26.4 37.2 56.8 77.6 94.7 140
1.40 1021 12.9 16.6 29.7 41.9 63.9 85.6 102 154
1.60 894 12.9 17.5 34.4 45.0 71.9 89.5 106 177
1.80 794 12.9 18.6 34.5 46.4 75.8 95.1 112 186
2.00 715 12.9 19.3 34.1 48.7 76.7 100 120 191
2.24 638 12.9 20.2 35.1 50.7 78.0 103 126 215
2.50 572 12.9 22.7 33.9 50.4 77.7 87.5 130 214
1430 2.80 511 12.9 23.3 33.8 49.6 76.3 98.6 134 226
3.15 454 12.9 22.5 33.5 49.6 77.5 112 139 185
3.55 403 12.8 19.6 25.5 42.7 74.9 88.9 139 183
4.00 358 12.4 21.0 28.8 39.4 65.0 100 155 203
4.50 318 12.3 19.3 31.0 44.3 70.4 112 152 212
5.00 286 12.3 21.3 28.5 46.5 75.3 112 163 221
5.60 255 12.1 21.9 31.7 46.4 73.2 110 147 212
1.25 936 12.7 15.3 26.4 37.2 56.8 77.6 94.7 140
1.40 836 12.9 16.6 29.7 41.9 63.9 85.6 106 154
1.60 731 12.9 17.5 34.4 45.0 71.9 89.5 114 177
1.80 650 12.9 18.6 35.0 46.4 75.8 95.1 120 195
2.00 585 12.9 19.3 34.8 48.7 76.7 100 128 200
2.24 522 12.9 20.2 35.7 51.0 78.3 103 134 215
2.50 468 12.9 23.0 34.5 51.3 78.6 87.5 139 226
1170 2.80 418 12.9 23.6 34.3 50.5 77.8 98.6 144 240
3.15 371 12.9 22.7 33.9 50.4 78.9 114 149 185
3.55 330 12.9 19.6 25.5 45.0 75.8 88.9 139 183
4.00 293 12.5 22.3 28.8 39.4 65.0 100 163 215
4.50 260 12.4 19.3 32.9 44.3 73.6 113 163 225
5.00 234 12.4 21.3 28.5 48.1 76.2 114 163 234
5.60 209 12.2 22.2 31.7 46.9 75.3 114 158 225
1.25 776 12.9 15.3 26.4 37.2 56.8 77.6 94.7 140
1.40 693 12.9 16.6 29.7 41.9 63.9 85.6 106 154
1.60 606 12.9 17.5 34.4 45.0 71.9 89.5 116 177
1.80 539 12.9 18.6 35.6 46.4 76.4 95.1 121 195
2.00 485 12.9 19.3 35.3 48.7 77.7 100 128 200
2.24 433 12.9 20.2 36.2 51.0 79.8 103 134 215
2.50 388 12.9 23.2 34.9 52.1 79.9 87.5 139 226
970 2.80 346 12.9 23.9 34.7 51.1 79.0 98.6 145 249
3.15 308 12.9 23.0 34.3 51.0 80.0 116 158 185
3.55 273 12.9 19.6 25.5 45.0 75.8 88.9 139 183
4.00 243 12.6 22.5 28.8 39.4 65.0 100 163 217
4.50 216 12.5 19.3 33.0 44.3 73.6 115 163 238
5.00 194 12.5 21.3 28.5 48.1 76.9 115 163 246
5.60 173 12.3 22.3 31.7 47.2 75.9 115 163 238
1.25 696 12.9 15.3 26.4 37.2 56.8 77.6 94.7 140
1.40 621 12.9 16.6 29.7 41.9 63.9 85.6 106 154
1.60 544 12.9 17.5 34.4 45.0 71.9 89.5 116 177
1.80 483 12.9 18.6 35.9 46.4 77.2 95.1 121 195
2.00 435 12.9 19.3 35.6 48.7 78.5 100 128 200
2.24 388 12.9 20.2 36.4 51.0 80.5 103 134 215
348 12.9 23.4 35.1 52.4 80.6 87.5 139 226
870 2.50
2.80 311 12.9 24.0 34.9 51.5 79.6 98.6 145 252
3.15 276 12.9 23.1 34.5 51.3 80.6 117 163 185
3.55 245 12.9 19.6 25.5 45.0 75.8 88.9 139 183
4.00 218 12.6 22.5 28.8 39.4 65.0 100 163 217
4.50 193 12.5 19.3 33.0 44.3 73.6 115 163 246
5.00 174 12.5 21.3 28.5 48.1 77.3 116 163 248
5.60 155 12.3 22.4 31.7 47.4 76.2 115 163 246
26 (161-110)
(MULTIPLY VALUES LISTED BY 1000)
M1180 M1190 M1200

1706
1677
1558
1490
1371
1260
966
993
979
689
704
655
589
520
1394
1371
1273
1218
1120
1030
789
811
800
563
575
562
505
451
1141
1121
1042
996
917
843
646
664
664
461
471
467
419
381
946
930
863
826
760
699
535
550
560
382
390
392
351
319
848
834
774
741
682
627
480
493
506
343
350
354
317
288
1998
1924
1749
1658
1604
1467
1366
1281
1154
1098
1010
902
905
694
1767
1703
1548
1468
1420
1299
1209
1134
1021
922
894
799
767
614
1406
1406
1320
1251
1205
1104
1030
966
870
734
748
681
611
523
1166
1166
1114
1048
999
916
854
806
763
609
620
565
506
448
1046
1046
999
940
896
821
766
723
705
546
556
507
454
402
3100
3100
3055
2675
2527
2616
2223
2102
1630
1441
1338
1250
1165
1003
2533
2533
2533
2323
2194
2204
1930
1825
1332
1177
1162
1085
1011
870
2073
2073
2073
1991
1887
1803
1664
1586
1090
963
1010
943
879
756
1718
1718
1718
1651
1564
1495
1380
1363
904
798
842
827
765
663
1541
1541
1541
1481
1403
1341
1238
1235
811
716
755
766
691
615

Power Ratings Hp/Single Reduction
Torque Ratings lb-in/Single Reduction
High
Speed
Shaft
rpm
1750
1430
1170
970
870
Nom
Ratio
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
Approx
LS
Shaft
rpm
1400
1250
1094
972
875
781
700
625
556
493
438
389
350
313
1144
1021
894
794
715
638
572
511
454
403
358
318
286
255
936
836
731
650
585
522
468
418
371
330
293
260
234
209
776
693
606
539
485
433
388
346
308
273
243
216
194
173
696
621
544
483
435
388
348
311
276
245
218
193
174
155
DRIVE SIZE
M1130 M1140 M1150 M1160 M1170 M1180 M1190
1293
1161
1011
882
802
698
614
547
480
410
346
318
286
222
1057
949
827
721
655
570
502
447
392
342
288
264
238
184
865
776
676
590
536
466
411
369
327
285
239
219
197
152
717
644
561
489
444
389
347
311
276
239
201
183
165
127
643
577
503
439
401
353
314
282
249
216
181
165
148
114
1661
1643
1434
1270
1128
1033
898
793
685
593
529
451
407
353
1358
1358
1191
1066
923
844
734
648
559
486
439
375
338
293
1111
1111
975
872
755
691
601
530
464
405
365
312
280
242
921
921
808
723
626
573
502
448
391
341
307
261
235
203
826
826
725
649
562
517
455
406
353
308
277
236
211
183
2480
2480
2311
2003
1796
1578
1380
1217
1053
930
808
686
610
523
2027
2027
1888
1637
1467
1290
1128
994
860
760
663
570
508
435
1658
1658
1545
1339
1201
1055
923
813
705
630
553
474
422
360
1375
1375
1281
1110
995
875
765
680
596
531
465
398
353
302
1233
1233
1149
996
893
785
692
616
539
480
420
359
319
272
4283
3838
3388
2993
2708
2423
2193
1961
1677
1398
1205
1050
936
762
3719
3332
2942
2598
2330
2074
1837
1603
1371
1142
984
862
777
662
3148
2841
2488
2163
1906
1697
1503
1311
1121
939
819
719
646
551
2610
2356
2063
1793
1580
1407
1246
1087
938
792
690
605
543
462
2341
2113
1850
1608
1418
1262
1118
982
850
717
623
546
490
417
5481
5065
4623
4087
3700
3312
3000
2687
2359
1968
1668
1517
1329
1108
4758
4397
4013
3548
3213
2876
2580
2252
1927
1608
1395
1239
1091
920
4107
3821
3437
2960
2675
2382
2111
1842
1577
1316
1148
1029
910
765
3405
3334
2849
2454
2218
1975
1750
1527
1307
1104
969
867
765
643
3054
2990
2555
2201
1989
1771
1570
1370
1183
1000
877
784
691
580
...
...
6584
5905
5336
4648
4187
3709
3249
2912
2516
2121
1846
1531
6840
6495
5717
5127
4592
3899
3465
3031
2692
2380
2056
1733
1508
1255
5596
5396
4694
4223
3757
3190
2835
2480
2202
1947
1682
1420
1249
1047
4639
4474
3891
3501
3115
2645
2350
2056
1826
1614
1404
1199
1053
881
4161
4012
3490
3140
2794
2372
2108
1844
1638
1455
1272
1085
952
796
...
...
8373
7442
6662
6033
5404
4772
4297
3821
3345
2629
2353
2006
...
8205
7269
6461
5783
5238
4691
4143
3730
3167
2752
2283
2043
1639
7115
7115
6317
5614
5026
4552
4077
3600
3071
2591
2251
1980
1702
1361
5899
5899
5540
4924
4372
3870
3410
3009
2546
2148
1867
1659
1437
1147
5291
5291
5134
4480
3921
3471
3058
2699
2284
1927
1693
1503
1301
1037
High
Speed
Shaft
rpm
1750
1430
1170
970
870
Nom
Ratio
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
Approx
LS
Shaft
rpm
1400
1250
1094
972
875
781
700
625
556
493
438
389
350
313
1144
1021
894
794
715
638
572
511
454
403
358
318
286
255
936
836
731
650
585
522
468
418
371
330
293
260
234
209
776
693
606
539
485
433
388
346
308
273
243
216
194
173
696
621
544
483
435
388
348
311
276
245
218
193
174
155
DRIVE SIZE
M1130 M1140 M1150 M1160 M1170 M1180 M1190
58.5
59.0
58.6
57.4
57.2
56.2
55.6
54.8
53.9
52.5
49.3
51.2
50.6
45.8
58.5
59.0
58.6
57.4
57.2
56.2
55.6
54.8
54.0
53.5
50.3
52.1
51.3
46.4
58.5
59.0
58.6
57.4
57.2
56.3
55.6
55.4
55.1
54.5
51.0
52.8
52.0
46.9
58.5
59.0
58.6
57.4
57.2
56.6
56.6
56.3
55.9
55.2
51.6
53.3
52.5
47.2
58.5
59.0
58.6
57.4
57.5
57.3
57.1
56.8
56.3
55.5
51.9
53.6
52.7
47.4
74.6
82.3
82.6
82.8
83.0
83.0
81.7
80.6
78.9
75.9
76.2
74.2
74.0
71.8
74.6
83.2
84.0
85.1
83.1
83.1
81.7
80.6
78.9
76.2
77.4
75.6
75.2
72.8
74.6
83.2
84.0
85.1
83.1
83.1
81.7
80.7
79.9
77.7
78.7
76.7
76.2
73.7
74.6
83.2
84.0
85.1
83.1
83.1
82.4
82.2
81.3
78.8
79.7
77.6
77.0
74.3
74.6
83.2
84.0
85.1
83.1
83.7
83.3
82.9
81.9
79.4
80.2
78.0
77.4
74.7
111
126
133
131
129
127
126
124
121
119
116
112
110
106
111
126
133
131
129
127
126
124
121
119
117
115
113
108
111
126
133
131
129
127
126
124
122
121
119
117
115
110
111
126
133
131
129
127
126
125
124
123
121
118
116
110
111
126
133
131
129
127
127
126
125
124
122
119
117
111
193
194
194
195
195
195
195
195
189
182
177
169
167
152
205
206
207
207
205
205
200
195
189
182
177
170
169
161
213
215
214
211
205
205
200
195
189
183
180
173
172
164
213
215
214
211
205
205
200
195
191
186
183
176
174
166
213
215
214
211
205
205
200
197
193
188
185
177
176
167
247
256
265
266
267
267
267
268
266
256
245
245
237
221
263
272
282
283
283
284
281
274
266
256
251
245
238
224
277
289
295
288
288
287
281
274
266
256
253
248
243
228
277
304
295
288
288
287
281
274
266
259
257
252
246
231
277
304
295
288
288
287
281
274
269
262
260
254
248
232
...
...
378
379
380
380
381
380
367
367
358
347
336
313
375
400
402
403
400
391
386
380
372
367
358
347
336
314
375
407
403
406
400
391
386
379
372
367
358
348
340
320
375
407
403
406
400
391
386
380
372
367
360
354
346
325
375
407
403
406
400
391
386
380
372
369
364
357
348
328
...
...
489
490
491
492
492
493
493
493
493
429
429
414
...
518
520
521
522
522
523
523
524
500
497
455
455
414
485
549
552
553
554
555
555
556
527
500
497
483
464
420
485
549
584
585
582
569
560
560
527
500
497
488
472
427
485
549
603
594
582
569
560
560
527
500
502
493
477
431
(161-110) 27
Type DH(All Sizes) & DV(Sizes M1130-M1210) Parallel Shaft

Power Ratings Hp/Double Reduction
High
Speed
Shaft
rpm
Nom
Ratio
Approx
LS
Shaft
rpm
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
M1220
M1230
M1240
M1250
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
350
313
278
246
219
194
175
156
140
125
109
97
88
78
70
63
286
255
227
201
179
159
143
128
114
102
89
79
72
64
57
51
234
209
186
165
146
130
117
104
94
84
73
65
59
52
47
42
...
...
210
195
180
166
153
143
133
123
114
104
97.4
84.6
75.2
65.3
...
...
183
169
156
144
133
124
116
104
96.9
85.3
79.8
69.8
62.0
53.7
...
...
159
147
136
126
115
108
98.6
85.9
80.0
69.8
65.5
57.5
51.1
44.2
...
...
338
311
281
260
238
220
209
189
175
154
137
120
113
97.4
...
...
279
268
244
226
207
191
180
162
144
126
113
97.7
92.3
80.3
...
...
229
220
203
193
180
163
148
133
118
103
92.3
79.9
75.7
66.2
...
...
506
461
422
391
363
340
308
284
263
202
202
186
156
150
...
...
439
400
366
340
315
295
267
242
216
165
165
153
128
123
...
...
382
348
318
295
274
250
222
199
177
135
135
125
105
101
...
...
789
725
659
608
567
526
484
448
411
342
321
270
265
209
...
...
675
630
572
528
492
457
419
379
338
286
264
221
217
173
...
...
553
547
497
459
425
386
345
312
278
234
217
181
178
143
...
...
1146
1058
979
902
846
772
714
647
588
520
456
414
368
327
...
...
995
919
850
783
735
664
594
533
484
427
373
340
302
271
...
...
847
798
738
679
621
548
490
439
398
351
305
279
248
223
...
...
1706
1674
1504
1366
1204
1084
966
903
786
689
640
564
504
462
...
...
1394
1370
1250
1133
997
896
789
745
647
563
526
464
414
379
...
...
1140
1121
1027
937
824
740
646
614
533
461
433
381
340
312
...
...
2197
2065
1888
1744
1584
1457
1351
1230
1077
979
858
784
705
627
...
...
1907
1793
1639
1514
1375
1231
1118
1016
888
806
706
645
580
515
...
...
1579
1558
1409
1277
1159
1018
924
838
732
664
581
530
476
423
3099
3099
2813
2602
2464
2200
1993
1797
1619
1458
1304
1171
1054
948
...
...
2532
2532
2442
2231
2073
1858
1653
1488
1339
1204
1075
964
868
779
...
...
2072
2072
2072
1856
1722
1541
1368
1230
1105
993
886
794
714
641
...
...
...
3099
3071
2790
2562
2428
2185
2045
1884
1747
1573
1406
1262
1136
1021
...
...
2532
2532
2422
2224
2108
1897
1776
1605
1443
1298
1159
1039
935
840
...
...
2072
2072
2072
1933
1832
1648
1475
1326
1192
1070
955
856
769
691
...
...
5707
5066
4495
3943
3532
3176
2904
2624
2349
2114
1898
1670
1506
...
...
...
4664
4140
3673
3257
2944
2640
2410
2174
1943
1746
1566
1376
1240
...
...
...
3816
3407
3059
2713
2447
2191
1997
1799
1606
1441
1292
1133
1021
...
...
...
...
5902
5376
4869
4464
4001
3597
3126
2972
2661
2394
2053
1749
1706
...
...
...
4823
4393
3979
3690
3334
2991
2555
2462
2201
1978
1678
1430
1404
...
...
...
3946
3595
3255
3073
2771
2451
2090
2037
1805
1632
1373
1173
1156
...
...
8720
8095
7084
6326
5624
5085
4550
4118
3703
3303
2945
2646
2425
...
...
...
7125
6615
5789
5169
4615
4215
3789
3422
3071
2734
2434
2184
2000
...
...
...
5830
5412
4740
4283
3849
3509
3147
2838
2543
2261
2010
1801
1648
...
...
...
...
8720
8720
8081
7217
6416
5801
5190
4305
4224
3768
3360
2931
2662
...
...
...
7125
7125
6603
5897
5264
4808
4322
3517
3503
3119
2777
2395
2175
...
...
...
5830
5830
5407
4886
4391
4002
3590
2878
2878
2573
2293
1960
1780
...
1750
1430
1170
28 (161-110)
DRIVE SIZE

Torque Ratings lb-in/Double Reduction
High
Speed
Shaft
rpm
1750
1430
1170
Nom
Ratio
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
Approx
LS
Shaft
rpm
350
313
278
246
219
194
175
156
140
125
109
97
88
78
70
63
286
255
227
201
179
159
143
128
114
102
89
79
72
64
57
51
234
209
186
165
146
130
117
104
94
84
73
65
59
52
47
42
DRIVE SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
M1220
M1230
M1240
M1250
...
...
46.9
48.6
50.7
52.6
54.7
56.8
58.6
61.1
63.4
65.5
68.1
67.2
65.9
63.4
...
...
49.8
51.6
53.9
55.9
58.2
60.3
62.3
63.1
66.0
65.5
68.3
67.9
66.4
63.9
...
...
52.9
54.9
57.2
59.4
61.8
64.1
64.8
63.8
66.7
65.5
68.6
68.4
66.9
64.3
...
...
76.5
79.2
81.7
84.5
85.3
90.5
94.9
95.4
100
98.8
101
97.4
101
99.8
...
...
77.3
83.7
86.8
89.8
90.7
96.2
100
100
101
98.8
101
97.4
102
101
...
...
77.3
83.7
88.2
93.7
96.3
100
101
101
101
98.8
102
97.4
102
101
...
...
114
117
125
130
134
138
142
146
152
129
145
153
144
154
...
...
122
125
133
138
143
147
151
152
153
129
145
154
144
154
...
...
129
132
141
147
151
152
153
153
154
129
145
154
144
155
...
...
176
182
187
197
205
210
217
223
230
218
231
219
233
206
...
...
184
194
199
209
218
223
230
231
231
224
233
219
234
209
...
...
184
206
211
222
230
230
231
232
233
224
234
219
235
211
...
...
254
264
275
288
297
308
320
325
326
328
321
330
331
328
...
...
270
280
292
306
315
325
326
328
329
330
321
332
333
333
...
...
281
298
310
324
326
327
329
330
331
332
321
333
334
335
...
...
392
432
437
441
445
449
442
454
457
449
460
462
464
465
...
...
392
432
444
447
451
454
442
458
460
449
463
465
466
467
...
...
392
432
446
452
456
458
442
461
463
449
466
467
468
469
...
...
486
510
535
549
553
583
598
603
607
610
614
616
618
620
...
...
517
542
568
583
587
603
606
609
613
615
618
620
621
623
...
...
523
575
597
601
605
609
612
614
617
619
621
623
624
626
591
654
680
722
741
745
766
772
778
783
788
792
796
799
...
...
591
654
722
758
763
770
777
782
787
791
795
799
802
805
...
...
591
654
749
770
775
781
786
791
794
798
801
804
807
809
...
...
...
664
728
758
799
821
831
883
909
943
949
955
960
964
968
...
...
664
735
805
849
872
883
938
948
954
959
963
967
971
974
...
...
664
735
841
901
926
938
953
958
962
966
970
974
976
979
...
...
1169
1169
1169
1169
1171
1185
1196
1207
1217
1226
1234
1242
1248
...
...
...
1169
1169
1169
1182
1194
1206
1215
1224
1232
1239
1246
1252
1257
...
...
...
1169
1176
1190
1203
1213
1223
1230
1237
1244
1250
1255
1261
1265
...
...
...
...
1342
1377
1405
1469
1472
1490
1429
1517
1530
1541
1481
1444
1568
...
...
...
1342
1377
1405
1486
1501
1516
1429
1538
1549
1558
1481
1444
1580
...
...
...
1342
1377
1405
1513
1525
1519
1429
1555
1552
1571
1481
1448
1590
...
...
1767
1824
1824
1824
1824
1824
1835
1855
1874
1892
1907
1920
1930
...
...
...
1767
1824
1824
1824
1832
1850
1870
1886
1902
1916
1929
1940
1947
...
...
...
1767
1824
1826
1847
1867
1883
1899
1912
1925
1936
1947
1956
1962
...
...
...
...
1965
2185
2314
2314
2314
2314
2328
2157
2377
2400
2420
2366
2356
...
...
...
1965
2185
2314
2314
2324
2347
2372
2157
2413
2431
2447
2366
2356
...
...
...
1965
2185
2316
2344
2369
2388
2408
2157
2422
2451
2470
2366
2356
...
(161-110) 29

High
Speed
Shaft
rpm
Nom
Ratio
Approx
LS
Shaft
rpm
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
M1220
M1230
M1240
M1250
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
194
173
154
137
121
108
97
87
78
69
61
54
49
43
39
35
174
155
138
123
109
97
87
78
70
62
54
48
44
39
35
31
...
...
139
129
119
110
101
92.2
82.5
71.8
66.9
57.8
54.4
47.9
42.6
36.9
...
...
129
120
110
102
91.5
83.1
74.3
64.7
60.2
51.9
48.9
43.1
38.3
33.1
...
...
189
182
168
160
151
136
123
111
98.2
85.5
76.7
66.3
62.9
55.2
...
...
170
163
151
143
135
122
111
99.8
88.2
76.7
68.9
59.4
56.5
49.6
...
...
326
305
279
254
229
209
184
166
148
112
112
104
86.7
84.0
...
...
293
282
256
229
206
188
166
149
133
100
100
93.4
77.8
75.4
...
...
458
456
435
393
355
322
287
260
232
194
180
150
148
119
...
...
411
409
390
352
319
289
258
233
208
174
162
134
133
107
...
...
702
700
642
567
518
457
408
365
332
293
253
232
206
185
...
...
630
630
578
510
467
411
367
329
298
263
227
209
185
166
...
...
945
929
851
777
687
618
535
512
444
382
360
317
283
259
...
...
848
834
763
697
616
556
480
460
399
342
324
285
254
233
...
...
1309
1309
1182
1069
969
851
771
699
610
553
484
441
396
352
...
...
1174
1174
1066
964
873
766
694
629
549
497
435
397
356
316
1718
1718
1718
1558
1444
1291
1144
1028
923
829
739
662
595
534
...
...
1541
1541
1541
1406
1303
1164
1031
926
831
745
665
595
535
480
...
...
...
1718
1718
1718
1650
1558
1392
1234
1108
995
893
796
713
641
575
...
...
1541
1541
1541
1480
1403
1255
1111
998
895
803
716
641
576
516
...
...
3204
2875
2576
2280
2053
1835
1671
1504
1341
1203
1077
945
850
...
...
...
2903
2602
2328
2059
1852
1655
1506
1355
1207
1083
969
849
764
...
...
...
...
3272
2980
2699
2582
2325
2032
1733
1693
1496
1357
1151
991
963
...
...
...
2934
2673
2421
2331
2098
1822
1554
1519
1348
1226
1043
897
865
...
...
4833
4517
4004
3610
3238
2947
2640
2377
2127
1889
1678
1503
1374
...
...
...
4335
4095
3624
3264
2925
2660
2381
2140
1917
1701
1510
1352
1236
...
...
...
...
4833
4833
4567
4118
3693
3362
3011
2386
2386
2133
1914
1635
1496
...
...
...
4335
4335
4134
3724
3336
3035
2716
2140
2140
1913
1723
1482
1355
...
970
870
30 (161-110)
DRIVE SIZE

High
Speed
Shaft
rpm
970
870
Nom
Ratio
Approx
LS
Shaft
rpm
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
M1220
M1230
M1240
M1250
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
194
173
154
137
121
108
97
87
78
69
61
54
49
43
39
35
174
155
138
123
109
97
87
78
70
62
54
48
44
39
35
31
...
...
55.9
58.0
60.5
62.8
65.3
65.9
65.4
64.3
67.2
65.5
68.7
68.7
67.2
64.6
...
...
57.8
60.0
62.5
64.9
65.8
66.2
65.7
64.6
67.5
65.5
68.8
68.9
67.4
64.7
...
...
77.3
83.7
88.2
93.7
97.4
101
101
101
101
98.8
102
97.4
102
102
...
...
77.3
83.7
88.2
93.7
97.4
101
101
101
102
98.8
102
97.4
102
102
...
...
133
140
149
152
153
153
153
154
154
129
145
155
144
155
...
...
133
145
152
153
153
153
154
154
154
129
145
155
144
155
...
...
184
207
223
230
231
232
232
233
234
224
235
219
235
212
...
...
184
207
223
230
232
232
233
234
234
224
235
219
235
213
...
...
281
315
325
327
328
329
331
331
332
333
321
334
335
335
...
...
281
316
327
328
329
330
331
332
333
334
321
335
335
336
...
...
392
432
446
452
458
461
442
464
466
449
468
469
470
470
...
...
392
432
446
452
458
463
442
465
467
449
469
470
470
471
...
...
523
583
604
607
610
614
616
618
621
622
624
625
627
628
...
...
523
583
607
610
613
616
618
620
622
624
625
626
628
629
591
654
749
780
784
789
793
797
800
803
806
808
810
812
...
...
591
654
749
785
788
793
797
800
803
806
808
810
812
814
...
...
...
664
735
841
928
950
955
961
965
969
972
975
978
981
983
...
...
664
735
841
928
953
960
965
969
972
975
978
981
983
985
...
...
1184
1197
1209
1220
1228
1236
1242
1248
1254
1258
1263
1267
1271
...
...
...
1196
1207
1218
1228
1235
1242
1248
1253
1258
1263
1266
1271
1273
...
...
...
...
1342
1377
1405
1533
1544
1519
1429
1559
1552
1575
1497
1475
1597
...
...
...
1342
1377
1405
1543
1553
1519
1429
1559
1559
1587
1513
1488
1601
...
...
1767
1836
1860
1878
1895
1907
1920
1932
1942
1952
1961
1968
1973
...
...
...
1767
1856
1877
1893
1908
1920
1931
1939
1951
1960
1967
1974
1979
...
...
...
...
1965
2185
2360
2383
2404
2420
2436
2157
2422
2451
2487
2381
2390
...
...
...
1965
2185
2382
2402
2421
2435
2450
2157
2422
2451
2496
2407
2413
...
DRIVE SIZE
(161-110) 31

Power Ratings Hp/Triple Reduction
High
Speed
Shaft
rpm
Nom
Ratio
Approx
LS
Shaft
rpm
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
M1220
M1230
M1240
M1250
25.0
28.0
31.5
36.0
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
140
25.0
28.0
31.5
36.0
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
140
25.0
28.0
31.5
36.0
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
140
70
63
56
49
44
39
35
31
28
25
22
19
18
16
14
13
57
51
45
40
36
32
29
26
23
20
18
16
14
13
11
10
47
42
37
33
29
26
23
21
19
16
15
13
12
10
9.4
8.4
...
...
60.9
54.7
48.2
42.8
37.1
35.1
31.5
27.8
24.8
21.5
19.6
17.2
15.4
13.4
...
...
49.9
44.8
39.5
35.1
30.4
28.7
25.8
22.7
20.3
17.6
16.0
14.1
12.6
10.9
...
...
40.9
36.7
32.4
28.8
25.0
23.5
21.1
18.6
16.7
14.4
13.1
11.5
10.4
8.95
...
...
69.7
69.7
65.6
59.8
52.8
46.7
41.4
37.6
34.3
30.2
26.2
23.8
21.7
19.2
...
...
56.9
56.9
53.6
48.9
43.1
38.5
33.8
30.7
28.0
24.7
21.4
19.5
17.8
15.7
...
...
46.6
46.6
43.9
40.0
35.3
31.7
27.7
25.1
22.9
20.2
17.5
15.9
14.5
12.8
...
...
116
116
106
94.8
85.4
70.2
68.5
59.9
53.7
48.3
42.7
37.3
33.5
30.1
...
...
96.8
96.8
86.6
77.6
69.9
58.0
56.0
49.0
43.9
39.5
34.9
30.5
27.4
24.6
...
...
80.3
80.3
70.9
63.6
57.3
47.9
45.9
40.1
36.0
32.4
28.6
25.0
22.4
20.2
...
...
160
160
160
149
120
95.4
95.4
92.4
85.2
69.3
61.2
58.9
54.3
44.4
...
...
133
133
133
122
99.0
78.9
78.9
75.6
69.7
56.9
50.4
48.2
44.4
36.4
...
...
110
110
109
100
81.4
65.2
65.2
61.9
57.1
46.7
41.5
39.5
36.4
29.8
...
...
246
246
234
208
187
157
152
134
119
107
96.9
85.6
75.9
68.1
...
...
201
201
192
170
153
131
124
110
97.2
87.3
79.2
70.0
62.1
55.7
...
...
165
165
157
140
125
108
102
89.8
79.6
71.5
64.9
57.3
50.8
45.6
...
...
352
319
283
253
232
202
183
163
145
133
115
102
91.2
83.5
...
...
288
261
232
207
189
165
150
133
119
109
94.0
83.4
74.5
68.2
...
...
235
214
189
169
155
135
122
109
97.1
88.9
76.9
68.2
61.0
55.8
...
...
519
457
417
379
336
303
265
242
219
195
168
154
139
124
...
...
424
373
341
309
274
247
216
198
179
159
138
126
114
101
...
...
347
306
279
253
225
202
177
162
147
130
113
103
93.2
82.7
833
743
665
598
536
486
433
387
347
311
268
240
215
193
...
...
684
610
546
491
440
398
355
317
285
255
220
196
176
158
...
...
563
501
448
403
361
327
291
260
233
209
180
161
144
129
...
...
...
898
800
717
644
578
523
466
417
374
335
289
258
232
208
...
...
737
657
588
528
474
429
382
341
306
275
236
211
190
170
...
...
606
540
483
434
389
352
313
280
251
225
194
173
155
139
...
1365
1224
1096
962
888
795
711
623
560
...
...
...
...
...
...
...
1123
1007
901
789
729
653
583
511
459
...
...
...
...
...
...
...
924
828
740
648
598
536
479
419
376
...
...
...
...
...
...
...
...
1437
1379
1170
1007
926
901
778
668
634
...
...
...
...
...
...
...
1174
1140
974
837
757
739
643
551
520
...
...
...
...
...
...
...
961
937
808
693
622
606
531
455
426
...
...
...
...
...
...
2145
1905
1693
1516
1400
1241
1101
985
900
...
...
...
...
...
...
...
1767
1568
1392
1246
1150
1019
903
808
737
...
...
...
...
...
...
...
1455
1290
1145
1024
945
837
741
663
605
...
...
...
...
...
...
...
...
2446
2165
1933
1657
1599
1417
1257
1105
1008
...
...
...
...
...
...
...
1999
1780
1589
1380
1313
1163
1031
914
833
...
...
...
...
...
...
...
1662
1473
1307
1147
1079
955
846
755
688
...
...
...
...
...
...
1750
1430
1170
32 (161-110)
DRIVE SIZE

Torque Ratings lb-in/Triple Reduction
High
Speed
Shaft
rpm
1750
1430
1170
Nom
Ratio
25.0
28.0
31.5
36.0
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
140
25.0
28.0
31.5
36.0
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
140
25.0
28.0
31.5
36.0
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
140
Approx
LS
Shaft
rpm
70
63
56
49
44
39
35
31
28
25
22
19
18
16
14
13
57
51
45
40
36
32
29
26
23
20
18
16
14
13
11
10
47
42
37
33
29
26
23
21
19
16
15
13
12
10
9.4
8.4
DRIVE SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
M1220
M1230
M1240
M1250
...
...
68.6
68.7
68.7
67.2
64.6
69.0
69.0
69.1
67.9
65.2
69.2
69.2
68.3
65.6
...
...
68.8
68.8
68.9
67.5
64.9
69.1
69.1
69.1
68.1
65.4
69.2
69.3
68.4
65.6
...
...
68.9
69.0
69.0
67.8
65.1
69.1
69.2
69.2
68.3
65.5
69.3
69.3
68.5
65.7
...
...
80.1
91.9
96.0
96.6
97.1
93.7
95.4
96.0
96.6
97.1
95.4
96.0
96.6
97.1
...
...
80.1
91.9
96.0
96.6
97.1
94.7
95.4
96.0
96.6
97.1
95.4
96.0
96.6
97.1
...
...
80.1
91.9
96.0
96.6
97.1
95.1
95.4
96.0
96.6
97.1
95.4
96.0
96.6
97.1
...
...
132
149
155
155
155
141
155
156
156
156
156
156
156
156
...
...
134
152
155
155
155
142
156
156
156
156
156
156
156
156
...
...
136
154
155
156
156
144
156
156
156
156
156
156
156
156
...
...
182
206
231
235
212
192
217
236
236
215
219
237
237
217
...
...
186
210
235
236
214
195
220
237
237
216
221
237
237
218
...
...
189
213
236
236
215
196
222
237
237
217
222
237
237
218
...
...
278
310
334
335
335
313
336
336
337
337
337
337
338
338
...
...
278
310
335
336
336
317
337
337
337
337
338
338
338
338
...
...
278
310
336
336
337
321
337
337
338
338
338
338
338
338
...
...
419
419
423
425
425
419
419
423
425
425
419
423
425
425
...
...
419
419
423
425
425
419
419
423
425
425
419
423
425
425
...
...
419
419
423
425
425
419
419
423
425
425
419
423
425
425
...
...
588
594
596
603
604
592
594
596
603
604
594
596
603
604
...
...
588
594
596
603
604
592
594
596
603
604
594
596
603
604
...
...
588
594
596
603
604
592
594
596
603
604
594
596
603
604
803
806
808
810
812
813
815
816
817
819
820
821
821
822
...
...
807
810
812
813
815
816
817
818
819
820
821
822
822
823
...
...
811
813
814
816
817
818
819
820
821
822
822
823
823
824
...
...
...
972
975
978
980
983
984
986
988
989
990
992
993
994
994
...
...
977
980
982
984
986
987
989
990
991
992
993
994
995
996
...
...
982
984
986
987
989
990
991
992
993
994
995
995
996
997
...
1253
1258
1262
1267
1269
1272
1275
1278
1280
...
...
...
...
...
...
...
1261
1265
1269
1273
1275
1277
1280
1282
1284
...
...
...
...
...
...
...
1268
1271
1274
1277
1279
1281
1283
1285
1287
...
...
...
...
...
...
...
...
1463
1572
1495
1473
1468
1599
1549
1520
1609
...
...
...
...
...
...
...
1463
1590
1522
1497
1468
1605
1566
1535
1614
...
...
...
...
...
...
...
1463
1598
1545
1516
1475
1610
1581
1548
1617
...
...
...
...
...
...
1930
1940
1949
1956
1961
1967
1973
1977
1981
...
...
...
...
...
...
...
1946
1954
1961
1967
1971
1976
1980
1984
1987
...
...
...
...
...
...
...
1958
1965
1971
1976
1979
1983
1987
1990
1992
...
...
...
...
...
...
...
...
2447
2451
2474
2378
2490
2498
2505
2467
2469
...
...
...
...
...
...
...
2447
2466
2490
2424
2502
2509
2515
2497
2496
...
...
...
...
...
...
...
2487
2495
2503
2461
2513
2518
2523
2521
2518
...
...
...
...
...
...
(161-110) 33

High
Speed
Shaft
rpm
Nom
Ratio
Approx
LS
Shaft
rpm
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
M1220
M1230
M1240
M1250
25.0
25.0
31.5
36.0
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
140
25.0
28.0
31.5
36.0
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
140
39
35
31
27
24
22
19
17
15
14
12
11
10
8.7
7.8
6.9
35
31
28
24
22
19
17
16
14
12
11
10
8.7
7.8
7.0
6.2
...
...
33.9
30.5
26.9
24.0
20.8
19.5
17.5
15.4
13.8
12.0
10.9
9.56
8.59
7.42
...
...
30.5
27.4
24.1
21.5
18.6
17.5
15.7
13.8
12.4
10.7
9.75
8.58
7.70
6.66
...
...
38.6
38.6
36.4
33.2
29.2
26.3
23.0
20.8
19.0
16.8
14.5
13.2
12.0
10.6
...
...
34.6
34.6
32.6
29.7
26.2
23.6
20.6
18.7
17.0
15.0
13.0
11.8
10.8
9.52
...
...
67.3
67.3
58.9
52.8
47.5
40.0
38.1
33.3
29.8
26.9
23.7
20.7
18.6
16.7
...
...
60.6
60.4
52.9
47.4
42.7
36.0
34.2
29.9
26.8
24.1
21.3
18.6
16.7
15.0
...
...
92.6
92.6
90.3
83.2
67.8
54.5
54.5
51.4
47.4
38.8
34.6
32.7
30.2
24.8
...
...
83.5
83.5
81.0
74.7
60.9
49.1
49.1
46.1
42.5
34.8
31.1
29.4
27.1
22.2
...
...
137
137
131
116
104
90.4
84.3
74.5
66.0
59.3
53.8
47.6
42.1
37.8
...
...
123
123
117
104
93.5
81.5
75.7
66.9
59.3
53.2
48.3
42.7
37.8
34.0
...
...
195
177
157
140
128
112
102
90.1
80.5
73.7
63.8
56.6
50.5
46.3
...
...
175
159
141
126
115
100
91
80.8
72.2
66.1
57.2
50.7
45.3
41.5
...
...
288
253
231
210
186
168
147
134
122
108
93.3
85.2
77.3
68.6
...
...
258
227
207
188
167
150
132
120
109
96.8
83.7
76.4
69.3
61.5
468
417
373
335
300
271
242
216
194
174
149
133
120
107
...
...
421
374
335
300
269
244
217
194
174
156
134
120
107
96.2
...
...
...
504
449
401
360
323
292
260
232
209
187
161
144
129
115
...
...
453
403
361
324
290
262
233
209
187
168
144
129
116
104
...
769
689
616
539
497
445
398
348
313
...
...
...
...
...
...
...
691
619
553
484
447
400
357
312
281
...
...
...
...
...
...
...
...
796
780
678
581
525
504
443
379
354
...
...
...
...
...
...
...
717
701
611
523
475
453
399
341
318
...
...
...
...
...
...
1213
1075
953
852
786
696
616
551
503
...
...
...
...
...
...
...
1090
966
856
765
706
625
553
494
451
...
...
...
...
...
...
...
...
1385
1227
1088
962
897
794
704
629
574
...
...
...
...
...
...
...
1245
1103
977
868
806
713
632
564
515
...
...
...
...
...
...
970
870
34 (161-110)
DRIVE SIZE

High
Speed
Shaft
rpm
970
870
Nom
Ratio
Approx
LS
Shaft
rpm
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
M1220
M1230
M1240
M1250
25.0
28.0
31.5
36.0
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
140
25.0
28.0
31.5
36.0
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
140
39
35
31
27
24
22
19
17
15
14
12
11
10
8.7
7.8
6.9
35
28
28
24
22
19
17
16
14
12
11
10
8.7
7.8
7.0
6.2
...
...
69.0
69.0
69.1
68.0
65.3
69.2
69.2
69.2
68.4
65.6
69.3
69.3
68.6
65.8
...
...
69.0
69.1
69.1
68.1
65.3
69.2
69.2
69.3
68.4
65.7
69.3
69.3
68.6
65.8
...
...
80.1
91.9
96.0
96.6
97.1
95.1
95.4
96.0
96.6
97.1
95.4
96.0
96.6
97.1
...
...
80.1
91.9
96.0
96.6
97.1
95.1
95.4
96.0
96.6
97.1
95.4
96.0
96.6
97.1
...
...
137
155
156
156
156
145
156
156
156
156
156
156
156
156
...
...
138
156
156
156
156
145
156
156
156
156
156
156
156
156
...
...
191
215
236
236
216
198
223
237
237
217
223
237
237
218
...
...
192
217
236
237
216
199
224
237
237
218
224
237
237
218
...
...
278
310
337
337
337
324
337
338
338
338
338
338
338
338
...
...
278
310
337
337
337
325
338
338
338
338
338
338
338
339
...
...
419
419
423
425
425
419
419
423
425
425
419
423
425
425
...
...
419
419
423
425
425
419
419
423
425
425
419
423
425
425
...
...
588
594
596
603
604
592
594
596
603
604
594
596
603
604
...
...
588
594
596
603
604
592
594
596
603
604
594
596
603
604
814
815
817
818
819
820
821
821
822
823
823
824
824
824
...
...
815
817
818
819
820
821
821
822
823
823
824
824
824
825
...
...
...
985
987
988
990
991
992
993
994
994
995
996
996
997
997
...
...
987
988
990
991
992
993
994
994
995
996
996
997
997
998
...
1273
1276
1278
1281
1282
1284
1286
1287
1289
...
...
...
...
...
...
...
1276
1278
1281
1283
1284
1286
1287
1289
1290
...
...
...
...
...
...
...
...
1463
1604
1562
1531
1501
1614
1592
1558
1620
...
...
...
...
...
...
...
1468
1607
1570
1539
1515
1616
1597
1562
1621
...
...
...
...
...
...
1968
1974
1979
1983
1985
1989
1992
1994
1996
...
...
...
...
...
...
...
1973
1978
1982
1986
1988
1991
1994
1997
1998
...
...
...
...
...
...
...
...
2499
2506
2512
2490
2521
2525
2529
2532
2535
...
...
...
...
...
...
...
2505
2512
2517
2504
2525
2529
2532
2535
2537
...
...
...
...
...
...
DRIVE SIZE
(161-110) 35
Basic Thermal Ratings Hp/Single Reduction

High
Speed
Shaft
rpm
1750
1430
1170
970
870
Nominal
Ratio
1.25
Thru
2.50
2.8
Thru
5.60
1.25
Thru
2.50
2.8
Thru
5.60
1.25
Thru
2.50
2.8
Thru
5.60
1.25
Thru
2.50
2.8
Thru
5.60
1.25
Thru
2.50
2.8
Thru
5.60
DRIVE SIZE
Auxiliary
Cooling
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
None
Electric Fan
182
506
285
808
387
1117
427
1258
485
1450
560
1712
627
1977
795
2528
None
Electric Fan
142
355
230
600
318
856
358
997
414
1189
491
1451
558
1683
726
2267
None
Electric Fan
174
437
274
712
373
997
413
1138
470
1330
546
1592
613
1824
781
2408
None
Electric Fan
133
296
214
517
299
752
339
893
395
1085
472
1347
539
1579
707
2163
None
Electric Fan
166
381
262
646
358
899
398
1040
453
1232
531
1494
598
1726
766
2310
None
Electric Fan
122
248
200
450
282
667
322
808
378
1000
454
1262
522
1494
690
2078
None
Electric Fan
160
336
254
584
349
821
389
962
443
1154
522
1416
589
1648
757
2232
None
Electric Fan
115
211
192
397
270
602
310
742
366
934
443
1197
510
1429
678
2013
None
Electric Fan
157
315
250
554
342
784
382
925
114
1117
515
1379
582
1611
750
2192
None
Electric Fan
122
192
186
371
264
570
304
710
360
902
437
1165
504
1397
672
1981
++ Basic thermal ratings listed are based on an ambient temperature of 77F(25C) at sea level. Application adjusted thermal ratings must be calculated using the application
adjusted thermal factors on Page 14 before comparing to the required load. For cooling beyond the range of values listed, contact your local district office.
36 (161-110)

HSS
rpm
Nominal
Ratio
1.25
1.40
1.60
1.80
2.00
2.24
2.50
1750
2.80
3.15
3.55
4.00
4.50
5.00
5.60
Auxiliary
Cooling
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
M1130
Q
...
...
...
...
...
...
...
39
...
198
...
72
349
...
146
346
...
191
318
...
212
286
...
222
222
...
M1140
...
...
...
...
...
...
...
...
220
...
416
...
102
529
...
179
451
...
225
407
...
233
353
...
M1150
548
1159
1053
136
930
338
808
83
484
686
148
542
610
197
523
523
DRIVE SIZE
M1160
266
969
1398
301
1205
437
1050
61
561
936
130
610
762
M1170
445
1208
115
1668
360
1517
571
1329
120
718
1108
M1180
67
912
196
1645
530
1846
742
1531
M1190
461
1746
2477
355
2353
773
2006
adjusted thermal factors on Page 14 before comparing to the required load. For cooling beyond the range of values listed, see Pump & Cooler selections on Page 189.
44 Refer to Factory.
(161-110) 37

HSS
rpm
Nominal
Ratio
1.25
1.40
1.60
1.80
2.00
2.24
2.50
1430
2.80
3.15
3.55
4.00
4.50
5.00
5.60
Auxiliary
Cooling
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
M1130
Q
Q
...
Q
Q
...
Q
Q
...
Q
Q
...
Q
Q
...
Q
Q
...
Q
125
...
32
259
...
121
362
...
208
342
...
249
288
...
262
264
...
238
238
...
184
184
...
M1140
Q
Q
...
Q
Q
...
Q
Q
...
Q
Q
...
Q
Q
...
Q
Q
...
Q
75
...
Q
288
...
77
456
...
184
486
...
247
439
...
278
375
...
298
338
...
281
293
...
M1150
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
263
Q
Q
989
Q
Q
1128
Q
Q
994
Q
230
860
44
401
760
146
516
663
225
570
570
258
508
508
275
435
435
DRIVE SIZE
M1160
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
151
Q
Q
830
Q
Q
1390
Q
70
1371
Q
371
1142
77
549
984
146
607
862
212
664
777
244
658
662
M1170
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
163
Q
Q
985
Q
Q
1617
Q
206
1608
Q
532
1395
121
685
1239
227
788
1091
305
839
920
M1180
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
280
Q
Q
725
Q
Q
1492
Q
273
2005
Q
690
1733
130
882
1508
241
946
1255
M1190
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
51
Q
Q
1388
Q
Q
2501
Q
172
2752
Q
572
2283
Q
883
2043
170
1102
1639
38 (161-110)

HSS
rpm
Nominal
Ratio
1.25
1.40
1.60
1.80
2.00
2.24
2.50
1170
2.80
3.15
3.55
4.00
4.50
5.00
5.60
Auxiliary
Cooling
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
M1130
Q
Q
...
Q
Q
...
Q
Q
...
Q
32
...
Q
200
...
50
392
...
160
411
...
227
369
...
274
327
...
285
285
...
239
239
...
219
219
...
197
197
...
152
152
...
M1140
Q
Q
...
Q
Q
...
Q
Q
...
Q
Q
...
Q
200
...
Q
444
...
94
601
...
203
530
...
283
464
...
347
405
...
359
365
...
312
312
...
280
280
...
242
242
...
M1150
Q
Q
Q
Q
Q
Q
Q
Q
330
Q
Q
1273
Q
Q
1201
Q
51
1055
Q
365
923
50
571
813
175
705
705
261
630
630
313
553
553
337
474
474
338
422
422
329
360
360
DRIVE SIZE
M1160
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
276
Q
Q
1050
Q
Q
1697
Q
167
1503
Q
470
1311
58
734
1121
202
879
939
285
819
819
310
719
719
336
646
646
329
551
551
M1170
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
368
Q
Q
1319
Q
Q
1916
Q
276
1842
Q
633
1577
147
871
1316
318
1122
1148
387
1029
1029
530
910
910
448
765
765
M1180
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
433
Q
Q
1340
Q
70
2009
Q
508
2202
Q
933
1947
143
1237
1682
334
1393
1420
421
1249
1249
445
1047
1047
M1190
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
1597
Q
Q
2930
Q
307
3600
Q
894
3071
43
1313
2251
217
1585
1980
355
1651
1702
455
1361
1361
(161-110) 39

HSS
rpm
Nominal
Ratio
1.25
1.40
1.60
1.80
2.00
2.24
2.50
970
2.80
3.15
3.55
4.00
4.50
5.00
5.60
Auxiliary
Cooling
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
M1130
Q
Q
...
Q
Q
...
Q
119
...
Q
338
...
138
444
...
242
389
...
311
347
...
311
311
...
276
276
...
239
239
...
201
201
...
183
183
...
165
165
...
127
127
...
M1140
Q
Q
...
Q
Q
...
Q
Q
...
Q
336
...
86
626
...
196
573
...
310
502
...
368
448
...
396
391
...
341
341
...
307
307
...
261
261
...
235
235
...
203
203
...
M1150
Q
Q
Q
Q
Q
885
Q
Q
1281
Q
Q
1110
Q
199
995
Q
433
875
160
651
765
267
680
680
341
596
596
385
531
531
396
465
465
388
398
398
353
353
353
302
302
302
DRIVE SIZE
M1160
Q
Q
Q
Q
Q
Q
Q
Q
952
Q
Q
1793
Q
Q
1580
Q
358
1407
Q
599
1246
146
775
1087
285
913
938
366
792
792
398
690
690
392
605
605
395
543
543
366
462
462
M1170
Q
Q
Q
Q
Q
Q
Q
Q
87
Q
Q
1198
Q
Q
2112
Q
134
1975
Q
471
1750
80
755
1527
253
940
1307
379
1023
1104
508
969
969
527
867
867
528
765
765
512
643
643
M1180
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
1045
Q
Q
2205
Q
287
2350
Q
794
2056
100
1124
1826
299
1393
1614
457
1404
1404
551
1199
1199
576
1053
1053
543
881
881
M1190
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
1276
Q
Q
2976
Q
Q
3910
Q
595
3009
Q
1098
2546
176
1428
2148
382
1601
1867
523
1659
1659
577
1437
1437
602
1147
1147
40 (161-110)

HSS
rpm
Nominal
Ratio
1.25
1.40
1.60
1.80
2.00
2.24
2.50
870
2.80
3.15
3.55
4.00
4.50
5.00
5.60
Auxiliary
Cooling
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
None
Electric Fan
Cooling Tubes
M1130
...
156
...
38
442
...
117
439
...
256
401
...
329
353
...
314
314
...
282
282
...
249
249
...
216
216
...
181
181
...
165
165
...
148
148
...
114
114
...
M1140
...
31
...
464
...
80
649
...
241
562
...
327
517
...
404
455
...
406
406
...
353
353
...
308
308
...
277
277
...
236
236
...
211
211
...
183
183
...
M1150
884
1233
1149
350
996
622
893
150
785
785
292
692
692
367
616
616
409
539
539
432
480
480
420
420
420
359
359
359
319
319
319
272
272
272
DRIVE SIZE
M1160
769
1850
178
1608
523
1418
836
1262
165
1000
1118
284
982
982
388
850
580
431
717
717
441
623
623
421
546
546
414
490
490
378
417
417
M1170
1300
2181
299
1989
729
1771
96
1002
1570
268
1183
1370
401
1183
1183
476
1000
1000
580
877
877
578
784
784
562
691
691
531
580
580
M1180
841
1963
566
2372
1085
2108
141
1464
1844
334
1638
1638
491
1455
1455
593
1272
1272
635
1085
1085
632
952
952
576
796
796
M1190
1429
3076
151
3471
883
3058
1470
2699
186
1828
2284
398
1927
1927
545
1693
1693
650
1503
1503
662
1301
1301
654
1037
1037
(161-110) 41
Type DH & DV
Parallel Shaft - Sizes M1130-M1210
Hp/Double Reduction
Basic Thermal Ratings

HSS
rpm
Nominal
Ratio
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
1750
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
Auxiliary
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
M1130
...
...
...
...
...
...
44
178
251
61
179
269
75
201
269
77
201
269
87
215
269
101
215
269
101
215
269
101
215
269
101
201
251
101
180
251
101
178
218
90
178
215
89
178
215
87
159
215
M1140
...
...
...
...
...
...
41
226
336
61
229
351
81
269
351
101
269
351
105
269
351
126
269
351
125
369
351
131
301
351
151
301
351
151
301
351
127
251
336
126
251
301
126
251
301
126
219
301
M1150
...
...
...
...
...
...
215
338
29
251
351
62
282
401
84
301
423
102
301
423
126
302
423
131
336
423
151
336
423
151
336
423
153
336
423
177
336
423
151
301
407
151
301
351
151
270
351
M1160
...
...
...
...
...
...
251
401
270
423
51
303
477
84
351
501
110
379
501
131
401
537
151
401
537
178
401
537
178
423
537
201
423
537
215
423
537
215
423
537
215
423
501
215
401
501
DRIVE SIZE
M1170
...
...
...
...
...
...
251
451
301
501
351
537
61
401
602
101
423
601
151
477
604
178
501
671
201
501
671
215
501
671
222
501
671
251
501
671
251
501
671
269
501
671
269
501
601
M1180
...
...
...
...
...
...
269
537
351
601
423
701
41
501
752
111
551
801
178
601
845
215
641
845
251
671
901
269
671
901
301
701
901
301
701
901
336
701
819
328
671
845
336
608
767
M1190
...
...
...
...
...
...
153
477
269
541
423
701
501
801
41
539
845
131
671
972
201
701
1001
251
752
1001
301
801
1073
351
801
1073
358
845
1073
401
845
1073
401
845
1073
423
801
1001
M1200
336
752
477
901
607
1073
801
1251
110
901
1251
215
1001
1342
336
1023
1501
401
1073
1501
477
1101
1501
537
1131
1477
524
1207
1501
601
1251
1501
601
1251
1501
601
1207
1501
...
...
...
...
...
...
M1210
...
...
...
336
751
451
901
607
1073
801
1257
110
901
1251
215
1001
1342
336
1073
1501
401
1023
1501
477
1166
1501
537
1207
1501
537
1207
1501
601
1251
1501
601
1251
1501
601
1207
1501
...
...
...
ss For Type DV, apply a multiplier of 0.8 to the thermal ratings.
Type DV gear drives are not available with shaft fans.
42 (161-110)
Type DH & DV
Hp/Double Reduction

HSS
rpm
Nominal
Ratio
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
1430
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
Auxiliary
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
M1130
...
...
...
...
...
...
80
178
268
87
180
269
101
201
269
101
201
269
104
201
269
105
201
269
101
178
251
101
178
251
101
160
219
101
171
216
101
152
216
88
151
216
86
151
201
84
151
201
M1140
...
...
...
...
...
...
101
251
351
108
251
351
126
269
254
127
269
352
132
269
351
151
269
352
151
269
351
151
269
351
129
223
336
129
223
301
127
216
301
126
216
301
126
216
269
126
201
269
M1150
...
...
...
...
...
...
86
269
423
103
269
423
126
301
451
151
301
451
151
301
451
152
301
451
160
301
451
178
301
451
178
301
423
151
269
401
151
269
351
151
269
351
151
251
351
151
251
336
M1160
...
...
...
...
...
...
85
301
501
112
336
537
135
351
537
156
355
537
178
352
537
201
360
537
201
363
537
216
401
537
216
401
537
216
401
537
216
355
501
216
351
501
216
351
501
216
351
477
DRIVE SIZE
M1170
...
...
...
...
...
...
76
351
601
107
401
601
151
423
618
178
451
672
201
451
701
216
477
701
251
477
701
251
501
701
269
477
701
269
501
672
269
477
672
269
477
672
269
477
601
269
451
601
M1180
...
...
...
...
...
...
61
451
751
113
501
801
178
551
846
216
537
846
269
601
901
301
601
901
301
671
952
336
607
901
351
672
901
351
672
901
351
601
901
351
601
846
351
601
846
351
601
846
M1190
...
...
...
...
...
...
423
801
51
501
901
131
540
953
201
601
1001
251
672
1001
301
701
1074
351
701
1074
352
752
1074
401
752
1074
423
801
1074
423
752
1074
451
752
1074
451
752
1074
451
752
1001
M1200
672
1251
126
752
1342
251
846
1342
351
953
1501
401
1001
1501
477
1074
1501
537
1074
1501
537
1074
1501
601
1074
1513
601
1074
1501
601
1074
1501
602
1074
1501
602
1074
1501
601
1074
1501
...
...
...
...
...
...
M1210
...
...
...
672
1251
126
752
1342
251
846
1342
351
953
1501
401
1001
1501
477
1074
1501
537
1074
1501
537
1074
1501
601
1074
1513
601
1074
1501
601
1074
1501
602
1074
1501
602
1074
1501
601
1074
1501
...
...
...
(161-110) 43
Type DH & DV
Hp/Double Reduction

HSS
rpm
Nominal
Ratio
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
1170
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
Auxiliary
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
M1130
...
...
...
...
...
...
101
178
269
104
178
269
107
178
269
101
158
251
101
155
251
101
153
251
101
151
222
101
151
216
101
151
216
90
151
216
87
133
201
85
128
201
82
126
178
78
126
178
M1140
...
...
...
...
...
...
127
224
352
133
251
352
151
251
355
151
251
355
151
251
352
133
216
336
130
216
336
130
216
301
127
216
301
126
201
301
126
201
269
126
178
269
126
178
269
109
178
251
M1150
...
...
...
...
...
...
151
269
451
151
269
451
157
269
451
178
301
451
178
301
451
178
301
154
178
301
451
156
251
401
153
251
353
155
251
351
151
251
351
151
219
336
151
216
302
133
216
301
M1160
...
...
...
...
...
...
158
336
537
178
351
537
201
351
537
201
351
537
216
351
537
216
351
537
216
351
537
216
351
537
216
351
537
216
351
501
216
336
501
216
301
477
201
301
423
201
301
423
DRIVE SIZE
M1170
...
...
...
...
...
...
201
401
701
216
423
701
225
451
701
251
451
701
269
451
701
269
451
701
269
451
701
269
537
701
271
451
701
271
451
672
269
451
606
269
423
601
269
401
601
251
401
537
M1180
...
...
...
...
...
...
216
501
901
269
537
901
301
537
901
301
541
901
351
601
952
351
601
901
351
601
901
351
601
901
351
601
901
351
601
846
352
601
846
351
537
846
351
537
801
351
537
752
M1190
...
...
...
...
...
...
201
537
1001
251
601
1074
301
601
1074
351
672
1074
351
701
1074
401
701
1074
401
701
1074
451
701
1074
451
752
1074
451
701
1074
451
701
1074
451
701
1001
451
701
1001
751
672
1001
M1200
351
846
1501
401
901
1501
477
953
1501
537
1001
1529
537
1001
1523
601
1074
1531
601
1074
1525
604
1074
1501
672
1074
1501
672
1074
1501
672
1001
1501
672
1001
1501
674
1001
1501
610
1001
1345
...
...
...
...
...
...
M1210
...
...
...
351
846
1501
401
901
1501
477
953
1501
537
1001
1529
537
1001
1523
601
1074
1531
601
1074
1525
604
1074
1501
672
1074
1501
672
1074
1501
672
1001
1501
672
1001
1501
674
1001
1501
610
1001
1345
...
...
...
44 (161-110)
Type DH & DV
Hp/Double Reduction

HSS
rpm
Nominal
Ratio
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
970
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
Auxiliary
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
M1130
...
...
...
...
...
...
101
151
251
101
151
251
101
151
251
101
151
225
101
151
217
101
151
216
101
134
216
101
130
216
89
126
201
86
126
201
84
126
178
81
113
178
79
109
178
76
105
158
M1140
...
...
...
...
...
...
151
220
351
151
221
357
151
221
353
134
216
336
133
216
336
131
201
301
127
201
301
126
178
301
126
178
269
126
178
269
126
160
251
111
156
251
108
151
251
104
151
218
M1150
...
...
...
...
...
...
178
269
451
178
269
451
178
269
451
178
269
451
159
251
401
157
251
401
156
251
355
154
223
351
151
216
351
151
216
351
151
216
336
135
201
301
132
201
301
129
181
301
M1160
...
...
...
...
...
...
216
336
536
216
351
536
216
351
536
216
351
536
218
351
536
218
351
536
216
336
536
216
336
501
216
301
501
216
301
477
216
301
451
201
269
423
201
269
423
178
269
401
DRIVE SIZE
M1170
...
...
...
...
...
...
251
423
701
269
423
701
269
423
701
269
423
701
269
423
701
272
423
701
301
423
672
301
423
672
272
423
601
269
401
601
269
401
601
269
351
537
251
351
536
251
351
536
M1180
...
...
...
...
...
...
301
537
9533
336
537
953
351
537
953
351
537
953
351
536
901
353
536
901
357
536
901
360
536
901
357
536
846
353
536
846
351
536
801
351
501
801
351
501
752
336
477
701
M1190
...
...
...
...
...
...
351
601
1074
354
605
1074
401
672
1074
423
701
1074
451
701
1074
451
701
1074
451
701
1074
451
701
1074
451
672
1074
451
672
1001
451
672
1001
451
601
1001
451
601
953
423
601
901
M1200
501
953
1515
536
953
1528
601
1001
1558
602
1001
1564
607
1001
1536
672
1001
1519
672
1001
1501
672
1001
1501
672
1001
1501
672
1001
1501
672
953
1501
672
953
1358
672
953
1341
601
901
1341
...
...
...
...
...
...
M1210
...
...
...
501
953
1515
536
953
1528
601
1001
1558
602
1001
1564
607
1001
1536
672
1001
1519
672
1001
1501
672
1001
1501
672
1001
1501
672
1001
1501
672
953
1501
672
953
1358
672
953
1341
601
901
1341
...
...
...
(161-110) 45
Type DH & DV
Hp/Double Reduction

HSS
rpm
Nominal
Ratio
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
870
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
Auxiliary
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
M1130
...
...
...
...
...
...
102
151
251
102
151
251
102
151
221
102
135
216
102
132
216
102
128
216
90
126
216
90
126
201
85
126
201
82
113
178
81
111
178
77
105
157
76
102
157
76
102
151
M1140
...
...
...
...
...
...
151
216
353
135
201
336
134
201
336
132
201
336
130
201
301
126
178
301
126
178
301
126
178
269
126
178
269
126
156
251
111
151
251
107
151
223
104
151
217
102
133
216
M1150
...
...
...
...
...
...
178
269
451
178
269
451
178
269
451
160
251
401
158
224
362
157
220
353
153
216
351
151
216
351
151
216
336
151
216
336
151
201
301
132
180
301
128
178
269
126
178
269
M1160
...
...
...
...
...
...
216
336
537
216
336
537
217
336
537
220
336
537
220
336
537
218
336
537
216
301
501
216
301
501
216
301
477
216
270
451
201
269
423
181
269
423
178
251
401
178
251
358
DRIVE SIZE
M1170
...
...
...
...
...
...
269
423
701
269
423
701
269
423
701
301
423
701
301
423
701
301
423
672
301
423
672
269
401
601
269
401
601
269
351
601
269
351
537
251
351
537
251
336
537
221
301
501
M1180
...
...
...
...
...
...
351
537
953
338
537
953
351
537
953
354
537
901
359
537
901
361
537
901
361
537
901
360
537
846
353
537
846
351
501
801
351
501
752
351
451
752
336
451
701
301
423
672
M1190
...
...
...
...
...
...
401
601
1074
423
605
1074
451
672
1074
451
672
1074
451
672
1074
477
672
1074
477
672
1074
477
672
1074
477
672
1001
477
601
1001
451
601
1001
451
601
953
423
537
901
401
537
846
M1200
601
953
1558
601
953
1565
672
1001
1544
672
1001
1530
672
1001
1513
701
1001
1501
701
1001
1501
701
953
1501
672
953
1501
672
953
1501
672
901
1342
609
901
1342
601
846
1342
601
846
1251
...
...
...
...
...
...
M1210
...
...
...
601
953
1558
601
953
1565
672
1001
1544
672
1001
1530
672
1001
1513
701
1001
1501
701
1001
1501
701
953
1501
672
953
1501
672
953
1501
672
901
1342
609
901
1342
601
846
1342
601
846
1251
...
...
...
46 (161-110)
Type DH Parallel Shaft - Sizes M1220-M1250
Hp/Double Reduction

High
Speed
Shaft
rpm
Nominal
Ratio
5.60
6.30
7.10
8.00
9.00
10.0
11.2
1750
12.5
14.0
16.0
18.0
20.0
22.4
25.0
Auxiliary
Cooling
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
DRIVE SIZE
M1220
M1230
M1240
M1250
501
501
126
701
701
301
846
846
501
1001
1001
601
1074
1074
701
1089
1089
752
1207
1207
102
846
1251
1251
178
846
1251
1251
219
901
1251
1251
269
901
1251
1251
301
901
1251
1251
336
901
1207
1207
...
...
...
...
...
...
...
...
501
501
126
701
701
301
846
846
501
1001
1001
601
1074
1074
701
1089
1089
752
1207
1207
102
846
1251
1251
178
846
1251
1251
219
901
1251
1251
269
901
1251
1251
301
901
1251
1251
336
901
1207
1207
401
401
701
701
201
1001
1001
451
1207
1207
672
1341
1341
801
1501
1501
953
1501
1501
126
1001
1507
1507
251
1074
1573
1573
351
1085
1751
1751
423
1207
1751
1751
451
1095
1540
1540
501
1207
1558
1558
...
...
...
...
...
...
...
...
401
401
701
701
201
1001
1001
451
1207
1207
672
1341
1341
801
1501
1501
953
1501
1501
126
1001
1507
1507
251
1074
1573
1573
351
1085
1751
1751
423
1207
1751
1751
451
1095
1540
1540
501
1207
1558
1558
++ Basic thermal ratings listed are based on an ambient temtperature of 77F(25C) at sea level. Application adjusted thermal ratings must be calculated using the application
(161-110) 47
Hp/Double Reduction

High
Speed
Shaft
rpm
Nominal
Ratio
5.60
6.30
7.10
8.00
9.00
10.0
11.2
1430
12.5
14.0
16.0
18.0
20.0
22.4
25.0
Auxiliary
Cooling
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
DRIVE SIZE
M1220
M1230
M1240
M1250
423
846
1074
537
953
1207
601
1074
1251
752
1074
1342
151
801
1085
1341
216
846
1207
1341
269
846
1207
1341
301
901
1207
1341
351
901
1207
1341
401
901
1207
1341
401
901
1084
1341
423
846
1074
1251
301
752
1001
1074
...
...
...
...
...
...
...
...
423
846
1074
537
953
1207
601
1074
1251
752
1074
1342
151
801
1085
1341
216
846
1207
1341
269
846
1207
1341
301
901
1207
1341
351
901
1207
1341
401
901
1207
1341
401
901
1084
1341
423
846
1074
1251
301
752
1001
1074
351
1001
1341
537
1207
1501
701
1341
1519
901
1341
1519
178
1001
1501
1751
269
1074
1501
1751
401
1074
1504
1751
451
1074
1501
1751
537
1207
1520
1751
536
1207
1506
1751
601
1207
1501
1751
601
1076
1501
1589
601
1088
1501
1751
...
...
...
...
...
...
...
...
351
1001
1341
537
1207
1501
701
1341
1519
901
1341
1519
178
1001
1501
1751
269
1074
1501
1751
401
1074
1504
1751
451
1074
1501
1751
537
1207
1520
1751
536
1207
1506
1751
601
1207
1501
1751
601
1076
1501
1589
601
1088
1501
1751
48 (161-110)
Hp/Double Reduction

High
Speed
Shaft
rpm
Nominal
Ratio
5.60
6.30
7.10
8.00
9.00
10.0
11.2
1170
12.5
14.0
16.0
18.0
20.0
22.4
25.0
Auxiliary
Cooling
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
DRIVE SIZE
M1220
M1230
M1240
M1250
135
701
1074
1501
216
801
1074
1501
301
846
1074
1501
351
846
1074
1501
401
901
1074
1501
451
901
1074
1501
451
846
1074
1349
477
901
1074
1342
477
846
1074
1342
501
846
1074
1342
501
846
1001
1251
401
751
901
1208
401
701
901
1074
...
...
...
...
...
...
...
...
135
701
1074
1501
216
801
1074
1501
301
846
1074
1501
351
846
1074
1501
401
901
1074
1501
451
901
1074
1501
451
846
1074
1349
477
901
1074
1342
477
846
1074
1342
501
846
1074
1342
501
846
1001
1251
401
751
901
1208
401
701
901
1074
157
901
1342
2001
271
1001
1343
2001
401
1074
1501
2001
501
1074
1501
2001
537
1079
1501
2001
601
1208
1501
2001
672
1208
1501
2001
672
1091
1501
1785
701
1208
1501
1773
701
1086
1501
1751
701
1074
1342
1751
701
1074
1342
1570
601
1001
1251
1501
...
...
...
...
...
...
...
...
157
901
1342
2001
271
1001
1343
2001
401
1074
1501
2001
501
1074
1501
2001
537
1079
1501
2001
601
1208
1501
2001
672
1208
1501
2001
672
1091
1501
1785
701
1208
1501
1773
701
1086
1501
1751
701
1074
1342
1751
701
1074
1342
1570
601
1001
1251
1501
(161-110) 49
Hp/Double Reduction

High
Speed
Shaft
rpm
Nominal
Ratio
5.60
6.30
7.10
8.00
9.00
10.0
11.2
970
12.5
14.0
16.0
18.0
20.0
22.4
25.0
Auxiliary
Cooling
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
DRIVE SIZE
M1220
M1230
M1240
M1250
423
846
1074
1567
451
901
1074
1543
501
901
1074
1514
501
901
1074
1501
537
901
1074
1501
537
846
1074
1501
537
846
1074
1363
537
846
1001
1342
501
801
953
1251
451
751
901
1251
451
701
846
1208
451
701
846
1081
451
604
752
1074
...
...
...
...
...
...
...
...
423
846
1074
1567
451
901
1074
1543
501
901
1074
1514
501
901
1074
1501
537
901
1074
1501
537
846
1074
1501
537
846
1074
1363
537
846
1001
1342
501
801
953
1251
451
751
901
1251
451
701
846
1208
451
701
846
1081
451
604
752
1074
539
1074
1501
2251
601
1085
1501
2251
701
1208
1501
2034
701
1208
1501
2002
752
1208
1501
2001
752
1208
1501
2001
752
1208
1356
2001
752
1074
1342
1777
752
1074
1342
1751
752
1074
1342
1751
672
1001
1208
1543
602
953
1074
1501
607
953
1074
1501
...
...
...
...
...
...
...
...
539
1074
1501
2251
601
1085
1501
2251
701
1208
1501
2034
701
1208
1501
2002
752
1208
1501
2001
752
1208
1501
2001
752
1208
1356
2001
752
1074
1342
1777
752
1074
1342
1751
752
1074
1342
1751
672
1001
1208
1543
602
953
1074
1501
607
953
1074
1501
50 (161-110)
Hp/Double Reduction

High
Speed
Shaft
rpm
Nominal
Ratio
5.60
6.30
7.10
8.00
9.00
10.0
11.2
870
12.5
14.0
16.0
18.0
20.0
22.4
25.0
Auxiliary
Cooling
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
DRIVE SIZE
M1220
M1230
M1240
M1250
501
846
1074
1582
501
846
1074
1547
537
846
1074
1508
537
846
1074
1501
537
846
1001
1501
537
846
1001
1501
537
846
1001
1342
537
801
953
1342
477
701
846
1251
477
701
846
1251
477
701
846
1208
451
672
801
1074
451
604
751
1074
...
...
...
...
...
...
...
...
501
846
1074
1582
501
846
1074
1547
537
846
1074
1508
537
846
1074
1501
537
846
1001
1501
537
846
1001
1501
537
846
1001
1342
537
801
953
1342
477
701
846
1251
477
701
846
1251
477
701
846
1208
451
672
801
1074
451
604
751
1074
701
1089
1501
2251
701
1208
1501
2251
752
1208
1501
2036
801
1208
1362
2001
801
1208
1345
2001
801
1090
1342
2001
801
1074
1342
2001
752
1074
1342
1751
801
1074
1251
1751
752
1074
1251
1751
672
953
1074
1508
606
901
1074
1501
609
901
1074
1501
...
...
...
...
...
...
...
...
701
1089
1501
2251
701
1208
1501
2251
752
1208
1501
2036
801
1208
1362
2001
801
1208
1345
2001
801
1090
1342
2001
801
1074
1342
2001
752
1074
1342
1751
801
1074
1251
1751
752
1074
1251
1751
672
953
1074
1508
606
901
1074
1501
609
901
1074
1501
(161-110) 51
Type DH & DV
Hp/Triple Reduction

HSS
rpm
Nominal
Ratio
25.0
28.0
31.5
36.0
40.0
45.0
50.0
56.0
1750
63.0
71.0
80.0
90.0
100
112
125
140
Auxiliary
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
M1130
...
...
...
...
...
...
55
101
159
55
101
159
55
101
159
55
101
159
55
101
159
55
101
159
55
101
159
33
61
101
33
61
101
33
61
101
33
61
101
33
61
101
33
61
101
33
61
101
M1140
...
...
...
...
...
...
90
158
259
90
158
259
90
158
259
90
158
259
90
158
259
90
158
259
90
158
259
58
101
178
58
101
178
58
101
178
58
101
178
58
101
178
58
101
178
58
101
178
M1150
...
...
...
...
...
...
126
221
362
126
221
362
126
221
362
126
221
362
126
221
362
126
221
362
126
221
362
85
151
251
85
151
251
85
151
251
85
151
251
85
151
251
85
151
251
85
151
251
M1160
...
...
...
...
...
...
151
269
413
151
269
413
151
269
413
151
269
413
151
269
413
151
269
413
151
269
413
102
179
301
102
179
301
102
179
301
102
179
301
102
179
301
102
179
301
102
179
301
DRIVE SIZE
M1170
...
...
...
...
...
...
178
301
479
178
301
479
178
301
479
178
301
479
178
301
479
178
301
479
178
301
479
126
215
351
126
215
351
126
215
351
126
215
351
126
215
351
126
215
351
126
215
351
M1180
...
...
...
...
...
...
215
355
601
215
355
601
215
355
601
215
355
601
215
355
601
215
355
601
215
355
601
158
277
477
158
277
477
158
277
477
158
277
477
158
277
477
158
277
477
158
277
477
M1190
...
...
...
...
...
...
229
423
671
229
423
671
229
423
671
229
423
671
229
423
671
229
423
671
229
423
671
178
312
537
178
312
537
178
312
537
178
312
537
178
312
537
178
312
537
178
312
537
M1200
336
556
901
336
537
901
336
537
901
336
537
901
336
537
901
336
537
901
336
537
901
336
537
901
336
537
901
270
477
752
270
477
752
270
477
752
270
477
752
270
477
752
...
...
...
...
...
...
M1210
...
...
...
336
556
901
304
537
901
336
537
901
336
537
901
336
537
901
336
537
901
336
537
901
336
537
901
270
477
752
270
477
752
270
477
752
270
477
752
270
477
752
270
477
752
...
...
...
52 (161-110)
Type DH & DV
Hp/Triple Reduction

HSS
rpm
Nominal
Ratio
25.0
28.0
31.5
36.0
40.0
45.0
50.0
56.0
1430
63.0
71.0
80.0
90.0
100
112
125
140
Auxiliary
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
M1130
...
...
...
...
...
...
51
83
151
51
83
151
51
83
151
51
83
151
51
83
151
51
83
151
51
83
151
32
52
88
32
52
88
32
52
88
32
52
88
32
52
88
32
52
88
32
52
88
M1140
...
...
...
...
...
...
84
151
251
84
151
251
84
151
251
84
151
251
84
151
251
84
151
251
84
151
251
62
90
153
62
90
153
62
90
153
62
90
153
62
90
153
62
90
153
62
90
153
M1150
...
...
...
...
...
...
126
201
351
126
201
351
126
201
351
126
201
351
126
201
351
126
201
351
126
201
351
81
131
222
81
131
222
81
131
222
81
131
222
81
131
222
81
131
222
81
131
222
M1160
...
...
...
...
...
...
135
218
401
135
218
401
135
218
401
135
218
401
135
218
401
135
218
401
135
218
401
102
156
269
102
156
269
102
156
269
102
156
269
102
156
269
102
156
269
102
156
269
DRIVE SIZE
M1170
...
...
...
...
...
...
156
269
451
156
269
451
156
269
451
156
269
451
156
269
451
156
269
451
156
269
451
126
201
336
126
201
336
126
201
336
126
201
336
126
201
336
126
201
336
126
201
336
M1180
...
...
...
...
...
...
201
336
537
201
336
537
201
336
537
201
336
537
201
336
537
201
336
537
201
336
537
151
251
423
151
251
423
151
251
423
151
251
423
151
251
423
151
251
423
151
251
423
M1190
...
...
...
...
...
...
216
351
601
216
351
601
216
351
601
216
351
601
216
351
601
216
351
601
216
351
601
178
272
501
178
272
501
178
272
501
178
272
501
178
272
501
178
272
501
178
272
501
M1200
301
501
846
301
501
846
301
501
846
301
501
846
301
501
846
301
501
846
301
501
846
301
501
846
301
501
846
251
401
672
251
401
672
251
401
672
251
401
672
251
401
672
...
...
...
...
...
...
M1210
...
...
...
301
501
846
301
501
846
301
501
846
301
501
846
301
501
846
301
501
846
301
501
846
301
501
846
251
401
672
251
401
672
251
401
672
251
401
672
251
401
672
251
401
672
...
...
...
(161-110) 53
Type DH & DV
Hp/Triple Reduction

HSS
rpm
Nominal
Ratio
25.0
28.0
31.5
36.0
40.0
45.0
50.0
56.0
1170
63.0
71.0
80.0
90.0
100
112
125
140
Auxiliary
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
M1130
...
...
...
...
...
...
51
76
127
51
76
127
51
76
127
51
76
127
51
76
127
51
76
127
51
76
127
31
51
83
31
51
83
31
51
83
31
51
83
31
51
83
31
51
83
31
51
83
M1140
...
...
...
...
...
...
79
126
216
79
126
216
79
126
216
79
126
216
79
126
216
79
126
216
79
126
216
54
81
151
54
81
151
54
81
151
54
81
151
54
81
151
54
81
151
54
81
151
M1150
...
...
...
...
...
...
111
178
301
111
178
301
111
178
301
111
178
301
111
178
301
111
178
301
111
178
301
78
126
216
78
126
216
78
126
216
78
126
216
78
126
216
78
126
216
78
126
216
M1160
...
...
...
...
...
...
127
201
351
127
201
351
127
201
351
127
201
351
127
201
351
127
201
351
127
201
351
102
151
269
102
151
269
102
151
269
102
151
269
102
151
269
102
151
269
102
151
269
DRIVE SIZE
M1170
...
...
...
...
...
...
151
222
423
151
222
423
151
222
423
151
222
423
151
222
423
151
222
423
151
222
423
110
178
301
110
178
301
110
178
301
110
178
301
110
178
301
110
178
301
110
178
301
M1180
...
...
...
...
...
...
201
301
501
201
301
501
201
301
501
201
301
501
201
301
501
201
301
501
201
301
501
151
216
401
151
216
401
151
216
401
151
216
401
151
216
401
151
216
401
151
216
401
M1190
...
...
...
...
...
...
216
336
543
216
336
543
216
336
543
216
336
543
216
336
543
216
336
543
216
336
543
159
251
451
159
251
451
159
251
451
159
251
451
159
251
451
159
251
451
159
251
451
M1200
301
451
801
301
451
801
301
451
801
301
451
801
301
451
801
301
451
801
301
451
801
301
451
801
301
451
801
221
336
601
221
336
601
221
336
601
221
336
601
221
336
601
...
...
...
...
...
...
M1210
...
...
...
301
451
801
301
451
801
301
451
801
301
451
801
301
451
801
301
451
801
301
451
801
301
451
801
221
336
601
221
336
601
221
336
601
221
336
601
221
336
601
221
336
601
...
...
...
54 (161-110)
Type DH & DV
Hp/Triple Reduction

HSS
rpm
Nominal
Ratio
25.0
28.0
31.5
36.0
40.0
45.0
50.0
56.0
970
63.0
71.0
80.0
90.0
100
112
125
140
Auxiliary
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
M1130
...
...
...
...
...
...
51
64
126
51
64
126
51
64
126
51
64
126
51
64
126
51
64
126
51
64
126
31
43
78
31
43
78
31
43
78
31
43
78
31
43
78
31
43
78
31
43
78
M1140
...
...
...
...
...
...
76
105
201
76
105
201
76
105
201
76
105
201
76
105
201
76
105
201
76
105
201
53
76
134
53
76
134
53
76
134
53
76
134
53
76
134
53
76
134
53
76
134
M1150
...
...
...
...
...
...
106
151
270
106
151
270
106
151
270
106
151
270
106
151
270
106
151
270
106
151
270
76
106
201
76
106
201
76
106
201
76
106
201
76
106
201
76
106
201
76
106
201
M1160
...
...
...
...
...
...
126
178
336
126
178
336
126
178
336
126
178
336
126
178
336
126
178
336
126
178
336
89
126
251
89
126
251
89
126
251
89
126
251
89
126
251
89
126
251
89
126
251
DRIVE SIZE
M1170
...
...
...
...
...
...
151
216
360
151
216
360
151
216
360
151
216
360
151
216
360
151
216
360
151
216
360
107
151
301
107
151
301
107
151
301
107
151
301
107
151
301
107
151
301
107
151
301
M1180
...
...
...
...
...
...
178
269
477
178
269
477
178
269
477
178
269
477
178
269
477
178
269
477
178
269
477
135
201
351
135
201
351
135
201
351
135
201
351
135
201
351
135
201
351
135
201
351
M1190
...
...
...
...
...
...
216
301
537
216
301
537
216
301
537
216
301
537
216
301
537
216
301
537
216
301
537
153
216
423
153
216
423
153
216
423
153
216
423
153
216
423
153
216
423
153
216
423
M1200
269
401
701
269
401
701
269
401
701
269
401
701
269
401
701
269
401
701
269
401
701
269
401
701
269
401
701
216
301
537
216
301
537
216
301
537
216
301
537
216
301
537
...
...
...
...
...
...
M1210
...
...
...
269
401
701
269
401
701
269
401
701
269
401
701
269
401
701
269
401
701
269
401
701
269
401
701
216
301
537
216
301
537
216
301
537
216
301
537
216
301
537
216
301
537
...
...
...
(161-110) 55
Type DH & DV
Hp/Triple Reduction

HSS
rpm
Nominal
Ratio
25.0
28.0
31.5
36.0
40.0
45.0
50.0
56.0
870
63.0
71.0
80.0
90.0
100
112
125
140
Auxiliary
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
M1130
...
...
...
...
...
...
44
61
111
44
61
111
44
61
111
44
61
111
44
61
111
44
61
111
44
61
111
31
42
76
31
42
76
31
42
76
31
42
76
31
42
76
31
42
76
31
42
76
M1140
...
...
...
...
...
...
76
102
201
76
102
201
76
102
201
76
102
201
76
102
201
76
102
201
76
102
201
52
76
130
52
76
130
52
76
130
52
76
130
52
76
130
52
76
130
52
76
130
M1150
...
...
...
...
...
...
103
151
269
103
151
269
103
151
269
103
151
269
103
151
269
103
151
269
103
151
269
76
102
201
76
102
201
76
102
201
76
102
201
76
102
201
76
102
201
76
102
201
M1160
...
...
...
...
...
...
126
160
301
126
160
301
126
160
301
126
160
301
126
160
301
126
160
301
126
160
301
87
126
219
87
126
219
87
126
219
87
126
219
87
126
219
87
126
219
87
126
219
DRIVE SIZE
M1170
...
...
...
...
...
...
151
201
351
151
201
351
151
201
351
151
201
351
151
201
351
151
201
351
151
201
351
105
151
269
105
151
269
105
151
269
105
151
269
105
151
269
105
151
269
105
151
269
M1180
...
...
...
...
...
...
178
251
477
178
251
477
178
251
477
178
251
477
178
251
477
178
251
477
178
251
477
132
178
351
132
178
351
132
178
351
132
178
351
132
178
351
132
178
351
132
178
351
M1190
...
...
...
...
...
...
201
269
501
201
269
501
201
269
501
201
269
501
201
269
501
201
269
501
201
269
501
151
216
401
151
216
401
151
216
401
151
216
401
151
216
401
151
216
401
151
216
401
M1200
269
351
701
269
351
701
269
351
701
269
351
701
269
351
701
269
351
701
269
351
701
269
351
701
269
351
701
216
301
537
216
301
537
216
301
537
216
301
537
216
301
537
...
...
...
...
...
...
M1210
...
...
...
269
351
701
269
351
701
269
351
701
269
351
701
269
351
701
269
351
701
269
351
701
269
351
701
216
301
537
216
301
537
216
301
537
216
301
537
216
301
537
216
301
537
...
...
...
56 (161-110)
Hp/Triple Reduction

High
Speed
Shaft
rpm
Nominal
Ratio
Auxiliary
Cooling
DRIVE SIZE
M1220
M1230
M1240
M1250
25.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
269
477
701
1341
...
...
...
...
358
672
953
1751
...
...
...
...
28.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
269
477
701
1341
269
477
701
1341
358
672
953
1751
358
672
953
1751
31.5
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
269
477
701
1341
269
477
701
1341
358
672
953
1751
358
672
953
1751
35.5
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
269
477
701
1341
269
477
701
1341
358
672
953
1751
358
672
953
1751
40.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
269
477
701
1341
269
477
701
1341
358
672
953
1751
358
672
953
1751
45.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
216
353
537
1001
269
477
701
1341
336
536
752
1501
358
672
953
1751
50.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
216
353
537
1001
216
353
537
1001
336
536
752
1501
336
536
752
1501
56.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
216
353
537
1001
216
353
537
1001
336
536
752
1501
336
536
752
1501
53.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
216
353
537
1001
216
353
537
1001
336
536
752
1501
336
536
752
1501
71.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
...
...
...
...
216
353
537
1001
...
...
...
...
336
536
752
1501
1750
(161-110) 57
Hp/Triple Reduction

High
Speed
Shaft
rpm
Nominal
Ratio
Auxiliary
Cooling
DRIVE SIZE
M1220
M1230
M1240
M1250
25.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
269
423
601
1251
...
...
...
...
358
601
801
1751
...
...
...
...
28.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
269
423
601
1251
269
423
601
1251
358
601
801
1751
358
601
801
1751
31.5
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
269
423
601
1251
269
423
601
1251
358
601
801
1751
358
601
801
1751
35.5
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
269
423
601
1251
269
423
601
1251
358
601
801
1751
358
601
801
1751
40.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
269
423
601
1251
269
423
601
1251
358
601
801
1751
358
601
801
1751
45.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
216
336
451
953
269
423
601
1251
301
477
601
1341
358
601
801
1751
50.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
216
336
451
953
216
336
451
953
301
477
601
1341
301
477
601
1341
56.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
216
336
451
953
216
336
451
953
301
477
601
1341
301
477
601
1341
53.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
216
336
451
953
216
336
451
953
301
477
601
1341
301
477
601
1341
71.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
...
...
...
...
216
336
451
953
...
...
...
...
301
477
601
1341
1430
58 (161-110)
Hp/Triple Reduction

High
Speed
Shaft
rpm
Nominal
Ratio
Auxiliary
Cooling
DRIVE SIZE
M1220
M1230
M1240
M1250
25.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
269
401
537
1208
...
...
...
...
354
537
701
1541
...
...
...
...
28.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
269
401
537
1208
269
401
537
1208
354
537
701
1541
354
537
701
1541
31.5
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
269
401
537
1208
269
401
537
1208
354
537
701
1541
354
537
701
1541
35.5
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
269
401
537
1208
269
401
537
1208
354
537
701
1541
354
537
701
1541
40.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
269
401
537
1208
269
401
537
1208
354
537
701
1541
354
537
701
1541
45.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
201
301
401
901
269
401
537
1208
301
423
537
1251
354
537
701
1541
50.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
201
301
401
901
201
301
401
901
301
423
537
1251
301
423
537
1251
56.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
201
301
401
901
201
301
401
901
301
423
537
1251
301
423
537
1251
53.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
201
301
401
901
201
301
401
901
301
423
537
1251
301
423
537
1251
71.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
...
...
...
...
201
301
401
901
...
...
...
...
301
423
537
1251
1170
(161-110) 59
Hp/Triple Reduction

High
Speed
Shaft
rpm
Nominal
Ratio
Auxiliary
Cooling
DRIVE SIZE
M1220
M1230
M1240
M1250
25.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
251
355
451
1074
...
...
...
...
351
501
604
1501
...
...
...
...
28.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
251
355
451
1074
251
355
451
1074
351
501
604
1501
351
501
604
1501
31.5
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
251
355
451
1074
251
355
451
1074
351
501
604
1501
351
501
604
1501
35.5
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
251
355
451
1074
251
355
451
1074
351
501
604
1501
351
501
604
1501
40.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
251
355
451
1074
251
355
451
1074
351
501
604
1501
351
501
604
1501
45.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
201
269
356
846
251
355
451
1074
269
401
501
1208
351
501
604
1501
50.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
201
269
356
846
201
269
356
846
269
401
501
1208
269
401
501
1208
56.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
201
269
356
846
201
269
356
846
269
401
501
1208
269
401
501
1208
53.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
201
269
356
846
201
269
356
846
269
401
501
1208
269
401
501
1208
71.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
...
...
...
...
201
269
356
846
...
...
...
...
269
401
501
1208
970
60 (161-110)
Hp/Triple Reduction

High
Speed
Shaft
rpm
Nominal
Ratio
Auxiliary
Cooling
DRIVE SIZE
M1220
M1230
M1240
M1250
25.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
251
336
423
1074
...
...
...
...
351
477
601
1501
...
...
...
...
28.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
251
336
423
1074
251
336
423
1074
351
477
601
1501
351
477
601
1501
31.5
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
251
336
423
1074
251
336
423
1074
351
477
601
1501
351
477
601
1501
35.5
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
251
336
423
1074
251
336
423
1074
351
477
601
1501
351
477
601
1501
40.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
251
336
423
1074
251
336
423
1074
351
477
601
1501
351
477
601
1501
45.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
179
251
336
801
251
336
423
1074
269
351
477
1092
351
477
601
1501
50.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
179
251
336
801
179
251
336
801
269
351
477
1092
269
351
477
1092
56.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
179
251
336
801
179
251
336
801
269
351
477
1092
269
351
477
1092
53.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
179
251
336
801
179
251
336
801
269
351
477
1092
269
351
477
1092
71.0
None
1 Shaft Fan
2 Shaft Fans
Elec. Fan
...
...
...
...
179
251
336
801
...
...
...
...
269
351
477
1092
870
(161-110) 61
Type DH, DV & DB Overhung Loads

Low Speed Shaft
Overhung Load (lb) = 126000 x hp x Fc x Lf

Pitch Dia (in) x rpm
Fc = Load Connection Factor.
Sprocket . . . . . . . . . . . . . . . . 1.00
CENTER LINE
OF LOAD
Machined Pinion & Gear . . . . . 1.25
Synchronous (Timing) Belt . . . . . . 1.30
VBelt . . . . . . . . . . . . . . . . . . . . 1.50
Flat Belt . . . . . . . . . . . . . . . . . . . 2.50
Lf = Load Location Factor.
DISTANCE
TO END OF SHAFT
Low Speed Shaft See table below.
High Speed Shaft Refer to Factory.
++ Refer all multiple chain sprocket and pinion mounted applications to the Factory
for deflection analysis.
Overhung Loads Overhung load is imposed upon a shaft

when a pinion, sprocket or sheave is used as a power takeoff.
The magnitude of the load varies with the type of takeoff and
its proximity to the shaft bearing. Calculate the load (including
minimum required service factor) and check the result against the
tabulated overhung load rating. The above overhung load formula
considers the transmitted power rating without service factor. This
is appropriate for applications where starting loads, momentary
overloads and brake capacities do not exceed 200% of drive
rating, (100% overload). For other considerations, compute the
equivalent power by multiplying the transmitted power by the
appropriate service factor.
Locate the center line of the load as close to the drive seal
cage as practical to minimize the overhung load and increase
bearing life.
Type DH, DV & DB Lf Load Location Factors
Consult the Factory for Higher Overhung Load Ratings In

many cases, overhung load capacity in excess of that published is
available. If the actual load should exceed the published capacity,
refer full details to the Factory; provide complete application
information, as well as direction of rotation, location, and
direction of applied load.
Low Speed Shaft Overhung Load Calculate low speed shaft
overhung load using the formula and Fc values at left. The Lf load
location factors tabulated below are based on the distance from
the center line of the load to the end of the shaft.
Example A 135 hp, 1170 rpm electric motor, coupling
connected to a Drive One Size M1160 drive used to drive a
uniformly loaded belt conveyor. The drive is a DH2 configuration
mounted on its D surface. The drives low speed shaft rotates at
75 rpm and is chain connected to the conveyor on the extension
opposite the low speed gear. The low speed sprocket has a pitch
diameter of 28 and is located 3 from the end of the shaft.
Calculate the overhung load as follows :
Overhung Load = 126,00 x 135 x 1.00 x 1.12
= 9,072 lbs

28 x 75
The allowable overhung load for a M1160DH2 drive that is
mounted on the D surface with extension opposite the low speed
gear is found on Page 65. The value for the allowable overhung
load is found by interpolating for the given output rpm. The
allowable overhung load is 19,000 lbs. The applied overhung
load is less than the allowable, therefore, this application is
acceptable.
Low Speed Shaft
Based on distance from center line of load to end of shaft

Distance
Inches
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
M1130
1.45
1.38
1.31
1.23
1.16
1.08
1.01
0.97
0.93
0.89
0.85
0.81
0.77
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
M1140
1.41
1.34
1.27
1.21
1.14
1.08
1.01
0.97
0.93
0.90
0.86
0.83
0.79
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
Single Reduction (DHC)

DRIVE SIZE
M1150 M1160 M1170
1.48 1.48 1.48
1.42 1.42 1.43
1.35 1.37 1.37
1.29 1.31 1.31
1.22 1.26 1.26
1.16 1.20 1.20
1.10 1.15 1.15
1.03 1.09 1.09
0.98 1.04 1.04
0.95 0.99 0.99
0.92 0.96 0.96
0.89 0.94 0.94
0.86 0.91 0.91
0.83 0.88 0.88
0.80 0.85 0.86
. . . 0.83 0.83
. . . 0.80 0.80
. . . 0.77 0.78
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
++ Interpolate for intermediate falues.
62 (161-110)
M1180
1.48
1.42
1.37
1.31
1.26
1.20
1.15
1.09
1.04
0.99
0.97
0.94
0.92
0.89
0.87
0.84
0.82
0.80
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
M1190
1.52
1.47
1.42
1.37
1.32
1.27
1.22
1.17
1.11
1.06
1.01
0.98
0.96
0.94
0.92
0.90
0.87
0.85
0.83
0.81
0.79
0.79
...
...
...
...
...
...
...
...
...
...
...
M1130
1.42
1.34
1.26
1.17
1.09
1.01
0.96
0.92
0.88
0.84
0.80
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
M1140
1.41
1.34
1.27
1.21
1.14
1.08
1.01
0.97
0.93
0.90
0.86
0.83
0.79
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
M1150
1.42
1.35
1.28
1.21
1.14
1.07
1.00
0.97
0.94
0.97
0.88
0.85
0.81
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
M1160
1.48
1.42
1.36
1.30
1.24
1.18
1.12
1.06
1.00
0.97
0.94
0.91
0.88
0.85
0.83
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
Double & Triple Reduction (DH, DV & DB)

DRIVE SIZE
M1170 M1180 M1190 M1200 M1210
1.48 1.48 1.53 1.47 1.47
1.42 1.42 1.47 1.42 1.42
1.36 1.36 1.42 1.38 1.38
1.30 1.30 1.36 1.33 1.33
1.24 1.24 1.31 1.28 1.28
1.18 1.18 1.25 1.24 1.24
1.12 1.12 1.19 1.19 1.19
1.06 1.06 1.14 1.15 1.15
1.00 1.00 1.08 1.10 1.10
0.97 0.97 1.03 1.06 1.06
0.94 0.95 0.99 1.01 1.01
0.92 0.92 0.97 0.98 0.98
0.89 0.90 0.94 0.96 0.96
0.86 0.87 0.92 0.94 0.94
0.83 0.85 0.90 0.92 0.92
...
. . . 0.88 0.90 0.90
...
. . . 0.85 0.88 0.88
...
. . . 0.83 0.86 0.86
...
. . . 0.81 0.84 0.84
...
...
. . . 0.82 0.82
...
...
. . . 0.80 0.80
...
...
. . . 0.78 0.78
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
M1220
1.36
1.33
1.29
1.26
1.22
1.18
1.15
1.11
1.08
1.04
1.01
0.99
0.98
0.96
0.95
0.94
0.92
0.91
0.90
0.88
0.87
0.86
0.84
0.83
0.82
0.80
0.79
0.78
...
...
...
...
...
M1230
1.36
1.33
1.29
1.26
1.22
1.18
1.15
1.11
1.08
1.04
1.01
0.99
0.98
0.96
0.95
0.94
0.92
0.91
0.90
0.88
0.87
0.86
0.84
0.83
0.82
0.80
0.79
0.78
...
...
...
...
...
M1240
1.40
1.37
1.34
1.31
1.28
1.24
1.21
1.18
1.15
1.12
1.08
1.05
1.02
1.00
0.98
0.97
0.96
0.95
0.94
0.92
0.91
0.90
0.89
0.88
0.87
0.85
0.84
0.83
0.82
0.81
0.79
0.78
0.77
M1250
1.40
1.37
1.34
1.31
1.28
1.24
1.21
1.18
1.15
1.12
1.08
1.05
1.02
1.00
0.98
0.97
0.96
0.95
0.94
0.92
0.91
0.90
0.89
0.88
0.87
0.85
0.84
0.83
0.82
0.81
0.79
0.78
0.77
Distance
Inches
0.0
0.5
1.0
1.5
20.
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
Type DHL Single Reduction & DBL Double Reduction
Low Speed Shaft Overhung Load

REFER TO THE FACTORY
High Speed Shaft Overhung Load - All Reductions

REFER TO THE FACTORY
(161-110) 63
Type DHC Single Reduction
Low Speed Shaft Overhung Load /lbs x 1000

Refer to Low Speed Gear Position on Page 23
Drive Mounted on C or D Surface
DH1
High
Speed
Shaft
rpm
1750
1170
580
Nominal
Ratio
Approx
LS Shaft
rpm
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
1400
1250
1094
972
875
781
700
625
556
493
438
389
350
313
936
836
731
650
585
522
468
418
371
330
293
260
234
209
464
414
363
322
290
259
232
207
184
163
145
129
116
104
DRIVE SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
1.9
2.1
2.3
2.6
2.7
3.0
3.2
3.4
3.7
4.0
4.4
4.6
4.6
4.6
5.5
5.5
5.9
6.2
6.6
6.9
7.3
7.8
8.0
8.0
8.0
8.0
8.0
8.0
6.7
6.6
7.1
7.4
7.9
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
2.9
2.3
2.1
2.9
3.3
3.7
4.1
4.5
5.0
5.4
5.9
6.6
7.0
7.6
3.9
3.6
3.6
4.1
4.4
4.9
5.4
5.8
6.3
6.7
7.3
7.9
8.4
9.0
6.0
5.7
5.8
6.3
6.7
7.0
7.7
8.2
8.8
9.0
9.0
9.0
9.0
9.0
1.2
2.0
2.4
2.7
3.0
3.4
3.7
4.1
4.8
5.6
6.3
6.9
7.5
8.2
2.0
2.4
2.9
3.4
4.0
4.4
5.0
5.6
6.4
7.2
7.9
8.5
9.0
9.9
4.6
5.0
5.5
6.1
6.7
7.2
7.7
8.4
9.2
10.2
11.0
11.8
12.5
13.5
1.3
2.2
3.3z
4.0
4.5
5.1
6.1
7.1
7.6
8.4
9.6
2.7
4.0
4.6
5.3
6.1
7.0
8.1
9.0
9.6
10.4
11.6
5.6
5.1
6.2
7.0
7.6
8.0
8.7
9.6
10.6
11.8
12.8
13.6
14.6
16.0
1.3
2.8
3.9
4.4
5.2
5.7
6.4
7.4
8.1
9.2
10.4
11.5
13.1
4.3
3.5
4.7
5.2
6.0
7.1
8.0
8.9
9.8
10.7
11.9
13.3
14.3
15.9
8.3
8.0
9.0
9.6
10.5
11.9
12.7
13.7
15.1
15.6
16.9
18.5
19.8
21.7
3.4
5.0
5.8
6.5
7.2
8.0
8.7
9.6
10.4
11.4
12.4
15.3
16.2
17.8
6.9
5.7
6.5
7.4
8.2
9.0
9.9
10.9
12.7
14.6
15.9
17.3
18.9
21.6
12.1
11.1
10.5
11.9
13.3
14.7
16.0
17.0
19.1
21.1
22.5
24.1
26.0
29.1
2.6
2.7
3.0
3.3
3.4
3.7
4.0
4.2
4.5
4.6
4.6
4.6
4.6
4.6
3.9
4.0
4.3
4.6
4.6
4.6
4.6
4.6
4.6
4.6
4.6
4.6
4.6
4.6
zz Published ratings are for standard assemblies and are based on the most unfavorable conditions of loading. Interpolate for speeds between those shown. For speeds below 580
rpm use ratings for 580 rpm.
44 Consult the Factory for overhung load ratings.
64 (161-110)
Type DH & DB Double & Triple Reduction - Sizes M1130-M1210

lbs x
Low Speed Shaft Overhung Load /
1000
Refer to Low Speed Gear Position on Pages 23-25 & 106-107

Drive Mounted on D Surface
DH2
DH3
DB3
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
Output
Ext
Ext on
Ext
Ext on
Ext
Ext on
Ext
Ext on
Ext
Ext on
Ext
Ext on
Ext
Ext on
Ext
Ext on
Ext
Ext on
rpm Opposite LS Gear Opposite LS Gear Opposite LS Gear Opposite LS Gear Opposite LS Gear Opposite LS Gear Opposite LS Gear Opposite LS Gear Opposite LS Gear
LS Gear Side LS Gear Side LS Gear Side LS Gear Side LS Gear Side LS Gear Side LS Gear Side LS Gear Side LS Gear Side
290
4.60 4.60 8.00 8.00 8.60 8.39 12.2
8.6
14.2
8.7
18.8 11.5 24.1 16.2 32.4 25.0 36.2 26.0
4.60 4.60 8.00 8.00 8.60 8.60 12.9
9.3
15.1
9.4
19.9 12.4 25.6 17.4 34.2 26.8 38.3 27.8
250
4.60 4.60 8.00 8.00 8.60 8.60 13.8 10.1 16.1 10.3 21.3 13.6 27.4 19.0 36.5 29.1 40.8 30.1
210
4.60 4.60 8.00 8.00 8.60 8.60 14.9 11.1 17.5 11.4 23.2 15.2 29.7 21.0 39.4 32.1 44.1 33.2
170
4.60 4.60 8.00 8.00 8.60 8.60 16.5 12.6 19.4 13.1 25.7 17.5 33.0 24.0 43.6 36.3 48.7 37.5
130
4.60 4.60 8.00 8.00 8.60 8.60 19.0 14.9 20.2 15.9 29.7 21.2 38.1 28.8 49.9 43.1 55.8 44.4
90
4.60 4.60 8.00 8.00 8.60 8.60 19.0 19.0 20.2 20.2 32.8 28.9 44.0 38.5 52.0 52.0 60.0 58.0
50
4.60 4.60 8.00 8.00 8.60 8.60 19.0 19.0 20.2 20.2 32.8 32.8 44.0 44.0 52.0 52.0 60.0 60.0
10
Drive Mounted on F Surface
DH2
DH3
DZ3
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
Output
Ext
Ext on
Ext
Ext on
Ext
Ext on
Ext
Ext on
Ext
Ext on
Ext
Ext on
Ext
Ext on
Ext
Ext on
Ext
Ext on
290
6.70 5.73 8.50 8.50 8.90 8.39 11.3
8.6
14.2
8.7
18.8 11.5 24.1 16.2 27.5 25.0 24.0 24.0
6.70 6.05 8.50 8.50 8.90 8.90 11.3
9.3
15.1
9.4
19.0 12.4 25.6 17.4 27.5 26.8 24.0 24.0
250
6.70 6.47 8.50 8.50 8.90 8.90 11.3 10.1 16.1 10.3 19.0 13.6 27.4 19.0 27.5 27.5 24.0 24.0
210
170
6.70 6.70 8.50 8.50 8.90 8.90 11.3 11.1 17.5 11.4 19.0 15.2 29.7 21.0 27.5 27.5 24.0 24.0
6.70 6.70 8.50 8.50 8.90 8.90 11.3 11.3 18.0 13.1 19.0 17.5 33.0 24.0 27.5 27.5 24.0 24.0
130
6.70 6.70 8.50 8.50 8.90 8.90 11.3 11.3 18.0 15.9 19.0 19.0 36.0 28.8 27.5 27.5 24.0 24.0
90
6.70 6.70 8.50 8.50 8.90 8.90 11.3 11.3 18.0 18.0 19.0 19.0 36.0 36.0 27.5 27.5 24.0 24.0
50
6.70 6.70 8.50 8.50 8.90 8.90 11.3 11.3 18.0 18.0 19.0 19.0 36.0 36.0 27.5 27.5 24.0 24.0
10
Drive Mounted on E Surface
DH2
DH3
DZ3
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
Output
Ext
Ext on
Ext
Ext on
Ext
Ext on
Ext
Ext on
Ext
Ext on
Ext
Ext on
Ext
Ext on
Ext
Ext on
Ext
Ext on
290
6.70 5.73 8.50 8.50 8.90 8.39 10.1
8.6
14.0
8.7
16.7 11.5 24.1 16.2 27.5 25.0 24.0 24.0
6.70 6.05 8.50 8.50 8.90 8.90 10.1
9.3
14.0
9.4
16.7 12.4 25.6 17.4 27.5 26.8 24.0 24.0
250
6.70 6.47 8.50 8.50 8.90 8.90 10.1 10.1 14.0 10.3 16.7 13.6 26.5 19.0 27.5 27.5 24.0 24.0
210
170
6.70 6.70 8.50 8.50 8.90 8.90 10.1 10.1 14.0 11.4 16.7 15.2 26.5 21.0 27.5 27.5 24.0 24.0
6.70 6.70 8.50 8.50 8.90 8.90 10.1 10.1 14.0 13.1 16.7 16.7 26.5 24.0 27.5 27.5 24.0 24.0
130
6.70 6.70 8.50 8.50 8.90 8.90 10.1 10.1 14.0 14.0 16.7 16.7 26.5 26.5 27.5 27.5 24.0 24.0
90
6.70 6.70 8.50 8.50 8.90 8.90 10.1 10.1 14.0 14.0 16.7 16.7 26.5 26.5 27.5 27.5 24.0 24.0
50
6.70 6.70 8.50 8.50 8.90 8.90 10.1 10.1 14.0 14.0 16.7 16.7 26.5 26.5 27.5 27.5 24.0 24.0
10
zz Overhung load values shown are for loads applied at the center of the extension key length. Published overhung load ratings are based on a combination of the most
unfavorable conditions of loading. Consult factory for application specific review if additional capacity is required. Interpolate for values at intermediate speeds. The last
overhung load listed applies to all lower output speeds for that drive size and mounting surface.
(161-110) 65
Type DH & DB Double & Triple Reduction - Sizes M1220-M1250

lbs x
Low Speed Shaft Overhung Load /
1000
Refer to Low Speed Gear Position on Pages 23-25 & 106-107

Drive Mounted on D Surface
DH2
M1220
Output
rpm
290
250
210
170
130
90
50
10
Ext
Opposite
LS Gear
62.0
62.0
62.0
62.0
62.0
62.0
62.0
62.0
DH3
DB3
Ext on
LS Gear
Side
52.1
56.1
61.4
68.4
70.1
70.1
70.1
70.1
Ext
Opposite
LS Gear
60.4
64.7
70.3
77.6
88.0
78.0
78.0
78.0
M1230
Ext on
LS Gear
Side
62.0
66.4
62.0
62.0
62.0
62.0
62.0
62.0
Ext
Opposite
LS Gear
71.0
75.7
70.1
70.1
70.1
70.1
70.1
70.1
M1240
M1250
Ext on
LS Gear
Side
45.2
49.2
54.2
61.0
70.9
87.1
78.0
78.0
Ext
Opposite
LS Gear
53.5
57.6
62.9
69.9
79.9
87.5
87.5
87.5
Ext on
LS Gear
Side
36.4
40.0
44.5
50.7
59.9
75.3
87.5
87.5
zz Overhung load values shown are for loads applied at midpoint of extension key length. Published overhung load ratings are based on a combination of the most unfavorable
conditions of loading. Consult the factory for application specific review if additional capacity is required. Interpolate for values at intermediate speeds. The last overhung load
listed applies to all lower output speeds for that drive size and mounting surface.
66 (161-110)
Type DVA Parallel Shaft Shaft Up or Down

Low Speed Shaft thrust Capacity THRUST UP
Double & Triple Reduction
Pounds Multiply values listed by 1000
DRIVE SIZE
Type DVA Parallel Shaft Shaft Up or Down

Low Speed Shaft thrust Capacity THRUST DOWN
DRIVE SIZE
Approx
LS Shaft
rpm
M1150
M1160
M1170
M1180
M1190
M1200
M1210
Approx
LS Shaft
rpm
M1150
M1160
M1170
M1180
M1190
M1200
M1210
320
280
250
225
200
175
160
140
125
115
100
90
80
70
60
50
44
35
26
20
15
10
6
...
4.94
5.17
5.24
5.50
5.59
5.83
6.02
6.22
6.40
6.56
6.90
7.18
7.39
7.55
8.01
8.52
9.09
9.72
10.4
12.1
14.1
17.1
...
7.52
7.80
7.99
8.30
8.49
8.80
9.18
9.53
9.76
10.1
10.5
10.9
11.2
11.7
12.3
13.5
14.6
15.8
17.6
18.7
22.0
25.7
...
7.38
7.60
7.84
8.07
8.30
8.56
8.83
9.09
9.36
9.65
9.92
10.3
10.6
11.1
11.6
12.2
13.0
14.5
18.4
20.6
23.7
28.7
...
20.8
21.5
22.1
22.8
23.4
24.2
25.0
25.9
26.8
27.4
28.6
29.4
30.9
31.9
34.0
35.9
38.9
44.0
49.9
56.2
63.2
65.0
...
22.6
23.4
24.1
24.9
25.5
26.4
27.4
28.9
29.6
30.1
31.5
32.6
34.5
35.1
37.5
39.4
41.0
45.3
50.3
57.3
65.1
76.4
10.8
11.4
11.8
12.1
12.4
12.8
13.2
13.6
14.1
14.5
14.8
15.5
16.0
16.5
17.0
18.0
19.1
20.3
22.8
27.6
32.5
38.5
47.7
11.6
11.9
12.2
12.6
13.0
13.4
13.8
14.3
14.7
15.1
15.5
16.1
16.6
17.1
17.7
18.7
19.8
20.6
22.6
25.0
29.7
35.9
45.0
320
280
250
225
200
175
160
140
125
115
100
90
80
70
60
50
44
35
26
20
15
10
6
...
4.76
4.99
5.05
5.30
5.39
5.61
5.80
5.99
6.17
6.32
6.65
6.91
7.13
7.27
7.72
8.21
8.76
9.37
10.4
12.1
14.1
17.0
...
7.19
7.46
7.63
7.93
8.12
8.41
8.77
9.11
9.32
9.62
10.0
10.4
10.7
11.2
11.7
12.4
14.1
15.2
17.1
19.0
21.3
26.1
...
7.04
7.25
7.48
7.70
7.91
8.15
8.42
8.66
8.92
9.19
9.51
9.77
10.1
10.6
11.0
11.6
12.4
13.8
17.8
19.9
23.1
28.0
...
20.2
20.9
21.5
22.2
22.8
23.5
24.3
25.2
26.1
29.3
30.7
31.8
33.0
34.2
36.5
38.4
39.9
44.2
48.9
55.2
62.3
72.2
...
22.1
22.7
23.4
24.2
24.9
25.7
26.7
28.1
29.1
29.3
30.7
31.8
33.0
34.2
36.7
38.4
39.9
44.2
49.1
56.2
64.0
76.3
10.2
10.7
11.1
11.4
11.7
12.1
12.4
12.9
13.3
13.7
14.0
14.6
15.1
15.6
16.1
17.0
18.0
19.2
21.5
26.4
31.3
37.2
46.5
11.0
11.3
11.6
12.0
12.3
12.8
13.1
13.5
14.0
14.4
14.7
15.3
15.8
16.3
16.8
17.8
18.9
19.6
21.5
23.8
28.5
34.7
43.7
44 Published thrust ratings are based on a combination of the most unfavorable

conditions of loading. For higher ratings, refer full data to the Factory. Consult the
Factory for combined radial and thrust loads. Ratings are for a maximum input
speed of 1750 rpm.

speed of 1750 rpm.
Type DXA Parallel Shaft Shaft Up or Down

Low Speed Shaft thrust Capacity THRUST UP
Triple Reduction
Type DXA Parallel Shaft Shaft Up or Down

Low Speed Shaft thrust Capacity THRUST DOWN
Triple Reduction

Approx
LS Shaft
rpm
145
120
100
90
75
65
50
40
30
25
20
15
10
6
DRIVE SIZE
M1150
M1160
M1170
M1180
M1190
M1200
M1210
...
6.43
6.57
6.96
7.17
7.60
8.00
8.52
9.29
10.1
10.7
12.6
14.5
17.4
...
11.6
11.2
10.8
11.1
11.8
12.2
13.3
14.1
15.5
17.8
19.5
23.4
27.7
...
12.7
12.1
11.7
11.6
12.3
12.7
13.8
14.7
16.1
17.2
20.5
23.9
29.0
...
31.1
31.2
31.2
31.0
32.9
35.0
37.0
41.3
46.2
49.4
55.1
62.7
65.0
...
34.1
34.8
35.4
36.1
38.4
40.8
43.1
45.1
50.4
51.5
56.3
65.1
78.2
17.1
16.1
15.3
15.8
16.2
17.2
18.2
19.4
21.3
25.9
28.6
31.6
38.8
48.2
18.7
18.2
16.0
16.4
17.0
18.0
19.1
20.2
22.1
23.6
27.7
30.1
37.2
45.7

speed of 1750 rpm

Approx
LS Shaft
rpm
145
120
100
90
75
65
50
40
30
25
20
15
10
6
DRIVE SIZE
M1150
M1160
M1170
M1180
M1190
M1200
M1210
...
6.20
6.33
6.70
6.91
7.32
7.70
8.21
8.95
9.69
10.4
12.9
14.1
17.0
...
11.2
10.8
11.7
10.6
11.3
11.7
12.8
13.5
14.8
17.2
18.8
22.8
27.0
...
12.4
11.7
11.2
11.1
11.8
12.1
13.3
14.1
15.4
16.6
19.8
23.3
28.4
...
30.5
30.7
30.5
30.2
32.1
32.9
36.1
40.3
45.2
48.5
54.1
61.7
72.8
...
33.6
34.2
34.7
35.4
37.7
40.2
42.3
44.1
49.4
50.4
55.2
64.0
77.1
16.4
15.4
14.0
14.9
15.3
16.2
17.2
18.3
20.1
25.2
27.4
30.4
37.6
47.0
18.1
17.6
15.2
15.6
16.1
17.1
18.1
19.2
21.0
22.4
26.7
31.1
36.0
44.5

speed of 1750 rpm
(161-110) 67
Exact Ratios/Parallel Shaft Drives

Single Reduction - Type DHC
Nominal
Ratio
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
M1130
1.256
1.411
1.609
1.807
1.981
2.239
2.512
2.784
3.121
3.552
3.962
4.478
4.905
5.722
M1140
1.247
1.391
1.600
1.811
2.043
2.233
2.526
2.824
3.200
3.556
4.000
4.571
5.053
5.647
DRIVE SIZE
M1160
1.253
1.403
1.593
1.808
2.000
2.238
2.474
2.765
3.133
3.615
4.087
4.476
4.947
5.529
M1150
1.247
1.412
1.600
1.811
2.000
2.233
2.526
2.824
3.200
3.556
4.000
4.571
5.053
5.647
M1170
1.253
1.403
1.593
1.808
2.000
2.238
2.474
2.765
3.133
3.615
4.087
4.476
4.947
5.529
M1180
1.247
1.400
1.596
1.784
1.978
2.275
2.528
2.844
3.138
3.500
3.957
4.550
5.056
5.688
M1190
1.265
1.433
1.623
1.830
2.048
2.263
2.529
2.867
3.185
3.583
4.095
4.526
5.059
5.733
Single Reduction - Type DHL

Nominal
Ratio
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
68 (161-110)
DRIVE SIZE
M1130
1.262
1.410
1.595
1.789
2.025
2.242
2.486
2.813
3.154
3.556
3.960
4.500
4.958
5.500
M1140
1.243
1.400
1.600
1.788
1.971
2.258
2.500
2.778
3.148
3.520
4.040
4.478
4.941
5.632
M1150
1.243
1.400
1.625
1.824
2.031
2.233
2.533
2.821
3.179
3.500
3.962
4.533
5.063
5.625
M1160
1.250
1.412
1.594
1.818
2.028
2.241
2.516
2.793
3.318
3.583
4.045
4.550
4.938
5.529
M1170
1.243
1.400
1.576
1.794
1.969
2.241
2.519
2.821
3.115
3.542
3.955
4.478
5.056
5.632
M1180
1.263
1.417
1.595
1.771
2.031
2.273
2.516
2.759
3.192
3.583
3.955
4.500
5.056
5.526
M1190
1.250
1.395
1.600
1.778
1.971
2.258
2.500
2.767
3.185
3.520
4.040
4.435
4.947
5.588
M1200
1.250
1.382
1.583
1.818
1.971
2.219
2.517
2.815
3.148
3.520
3.960
4.435
4.947
5.526
Exact Ratios/Parallel Shaft Drives
Double Reduction - Type DH(All Sizes) & DV(Sizes M1130-M1210)

Nominal
Ratio
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
M1130
...
...
6.189
6.917
7.821
8.777
9.932
11.00
12.19
13.80
15.47
17.44
19.42
22.07
24.32
26.98
M1140
...
...
6.282
7.074
8.084
9.033
9.957
11.41
12.63
14.04
15.91
17.79
20.41
22.63
24.97
28.45
M1150
...
...
6.282
7.074
8.211
9.214
10.26
11.28
12.80
14.26
16.06
17.68
20.02
22.91
25.58
28.42
M1160
...
...
6.184
6.985
7.885
8.995
10.03
11.09
12.45
13.82
15.52
17.73
20.01
22.51
24.43
27.36
M1170
...
...
6.151
6.926
7.796
8.876
9.740
11.09
12.46
13.96
15.41
17.52
19.56
22.16
25.01
27.86
M1180
...
...
6.386
7.162
8.062
8.956
10.27
11.49
12.72
13.95
16.14
18.12
19.99
22.75
25.56
27.94
DRIVE SIZE
M1190
...
...
6.146
6.857
7.867
8.741
9.689
11.10
12.29
13.60
15.66
17.31
19.86
21.80
24.32
27.48
M1200
5.298
5.859
6.710
7.706
8.352
9.403
10.67
11.93
13.34
14.92
16.78
18.80
20.97
23.42
...
...
M1210
...
5.952
6.583
7.540
8.658
9.384
10.57
11.99
13.40
14.99
16.76
18.86
21.12
23.56
26.32
...
M1220
...
5.688
6.407
7.221
8.233
9.206
10.36
11.44
12.77
14.38
16.10
18.04
20.65
23.00
...
...
M1230
...
...
6.313
7.111
8.014
9.138
10.22
11.50
12.69
14.17
15.96
17.87
20.03
22.92
25.53
...
M1240
...
5.628
6.257
7.150
8.007
9.006
9.960
11.20
12.51
14.05
15.90
17.98
20.15
22.10
...
...
M1250
...
...
6.259
6.959
7.952
8.905
10.02
11.08
12.45
13.91
15.63
17.68
20.00
22.41
24.58
...
Triple Reduction - Type DH(All Sizes) & DV(Sizes M1130-M1210)

Nominal
Ratio
25.0
28.0
31.5
36.0
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
140
M1130
...
...
31.29
34.85
39.60
43.63
48.40
54.59
60.80
69.09
76.13
84.45
98.19
111.6
122.9
136.4
M1140
...
...
31.93
36.65
40.63
44.83
51.09
55.73
63.96
70.90
78.23
89.16
100.9
111.9
123.4
140.7
M1150
...
...
31.39
35.53
40.66
45.40
50.45
55.67
63.01
72.11
80.53
89.47
101.3
116.0
129.5
143.9
M1160
...
...
31.72
35.82
40.28
43.71
48.95
55.91
63.12
70.99
77.04
86.28
99.24
111.6
121.1
135.6
M1170
...
...
31.33
34.98
39.61
44.72
49.81
55.16
61.59
69.75
78.74
87.71
96.67
109.5
123.6
137.7
M1180
...
...
33.03
36.46
41.49
46.61
50.95
57.58
63.55
72.31
81.24
88.80
101.2
115.2
129.4
141.4
DRIVE SIZE
M1190
...
...
31.47
36.12
39.64
44.23
49.96
54.31
62.33
68.42
76.33
86.22
98.08
107.7
120.1
135.7
M1200
26.76
30.11
33.72
37.62
42.02
46.48
52.29
58.55
65.32
72.97
84.85
95.02
106.0
118.4
...
...
M1210
...
30.07
33.83
37.89
42.27
47.21
52.22
58.75
65.79
73.40
81.98
95.33
106.8
119.1
133.0
...
M1220
25.48
28.52
31.96
36.58
39.68
44.41
49.77
56.97
63.46
...
...
...
...
...
...
...
M1230
...
28.28
31.65
35.47
40.60
44.04
49.29
55.24
63.23
70.43
...
...
...
...
...
...
M1240
24.98
28.27
31.97
35.83
38.87
43.99
49.75
55.75
61.14
...
...
...
...
...
...
...
M1250
...
27.78
31.44
35.55
39.84
43.23
48.93
55.33
62.01
67.99
...
...
...
...
...
...
(161-110) 69
WR2/Parallel Shaft Drives (Type DH)

Approximate WR2 (lb-in.2) Referred to Drive High Speed Shaft
Nominal
Ratios
M1130
M1140
M1150
M1160
M1170
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
1706
1257
904.1
685.8
560.9
430.8
338.8
277.3
226.1
165.8
136.0
111.0
97.32
74.60
3237
2424
1721
1293
987.5
815.8
631.0
506.7
402.9
322.3
262.3
211.1
181.9
152.7
6221
4549
3280
2471
1963
1557
1197
962.8
757.5
613.6
500.7
407.5
343.7
288.2
10993
8217
5918
4431
3549
2781
2270
1853
1401
1085
885.5
774.6
657.0
464.2
18099
13498
9712
7346
5774
4558
3722
3035
2417
1923
1312
1124
960.4
797.6
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
46.01
41.35
37.03
33.58
30.42
27.85
26.69
23.91
22.83
16.63
15.39
14.39
14.08
13.62
97.10
82.99
72.01
64.30
58.36
51.17
48.55
43.18
37.92
31.52
30.32
26.14
24.32
22.49
231.4
203.1
173.8
155.3
140.0
128.6
119.0
105.9
99.89
68.49
57.73
49.68
43.69
38.89
380.2
334.7
317.7
260.4
234.9
214.5
201.8
193.7
168.7
116.2
98.63
84.85
77.28
67.26
5.00
5.60
6.30
7.00
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.5
25.0
28.0
...
...
88.84
75.51
63.53
54.36
46.35
40.47
36.23
31.08
28.04
18.68
15.97
13.48
12.12
10.53
...
...
177.5
146.3
120.3
102.8
89.81
74.78
67.42
57.97
48.95
38.52
32.23
28.32
24.91
21.35
...
...
358.5
303.5
248.6
214.7
187.8
168.1
152.1
130.6
119.6
81.56
67.17
55.85
47.16
40.38
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
140
...
...
11.60
10.80
10.02
9.512
9.052
5.628
5.365
5.108
4.942
4.791
2.879
2.780
2.717
2.659
...
...
22.62
20.38
19.04
17.95
16.73
11.49
10.76
10.32
9.962
9.561
6.442
6.265
6.122
5.962
...
...
42.14
37.85
34.16
32.03
30.08
19.14
17.78
16.60
15.93
15.31
9.297
8.843
8.582
8.341
DRIVE SIZE
M1180
M1190
SINGLE REDUCTION (DHC)
M1200
M1210
M1220
M1230
M1240
M1250
32803
53325
24163
38655
17388
27949
13416
21012
10601
16326
7788
12956
6273
10293
5040
8207
3970
6697
3232
5448
2599
4395
2065
3215
1769
2677
1478
2218
SINGLE REDUCTION (DHL)
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
750.7
660.7
581.8
510.2
466.0
411.7
383.3
339.6
304.7
212.3
185.7
172.5
148.5
128.8
1468
2636
1287
2330
1126
2002
1004
1783
868.0
1579
770.8
1363
696.5
1219
633.7
1092
546.7
947.8
419.6
860.6
376.1
723.4
327.8
686.4
288.3
597.2
262.2
512.9
DOUBLE REDUCTION (DH)
4925
4382
3758
3226
2954
2599
2294
2032
1795
1479
1292
1139
1038
895.6
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
624.8
527.0
468.9
376.9
328.8
291.5
267.9
249.6
212.0
144.6
119.9
100.5
89.77
75.85
...
...
1181
1001
853.1
722.1
643.1
546.1
496.6
428.6
379.2
264.4
226.6
203.3
171.7
147.4
...
...
...
...
2184
4091
1859
3504
1580
2898
1374
2514
1152
2177
999.6
1823
887.2
1599
793.2
1405
667.7
1193
512.2
1052
452.2
870.3
386.4
811.4
335.2
699.2
302.3
592.6
TRIPLE REDUCTION (DH)
7522
6506
4453
3998
3422
3422
2932
2542
2202
1803
1547
1341
1199
1023
...
...
...
7851
5581
4608
4130
4130
3526
3013
2607
2253
1845
1580
1367
1220
1040
...
...
17723
15004
12776
10792
9409
8205
7344
6520
5641
5160
4528
3907
3584
...
...
...
...
19595
16478
13937
11685
10123
8768
7807
6891
5933
5393
4714
4049
3698
...
...
38927
33463
27860
23989
20658
18373
15748
13623
11655
10289
8799
7762
7072
...
...
...
...
43463
37132
30669
26229
22430
19821
16893
14541
12383
10857
9243
8116
7366
...
...
...
70.46
63.73
58.42
55.31
51.33
32.28
30.11
28.40
27.40
26.12
15.11
14.42
14.01
13.49
...
...
141.9
129.7
118.8
109.8
102.8
60.73
56.80
53.28
50.37
48.12
31.43
30.00
28.82
27.91
1008
928.7
868.5
811.6
562.3
474.3
448.2
428.2
409.3
393.0
264.5
256.9
249.8
243.6
...
...
...
1020
938.8
876.6
818.1
767.5
478.6
451.5
430.9
411.5
394.7
265.8
258.0
250.6
244.2
...
3144
2926
2755
2582
1657
1566
1496
1425
1379
...
...
...
...
...
...
...
...
3235
2997
2812
2625
1695
1597
1521
1443
1394
...
...
...
...
...
...
5985
5486
5065
4734
3430
3225
3051
2914
2819
...
...
...
...
...
...
...
...
6215
5666
5205
4846
3525
3299
3109
2960
2858
...
...
...
...
...
...
...
...
254.8
236.7
217.2
200.9
190.2
111.2
105.3
98.82
93.48
89.95
57.33
54.79
52.69
51.30
...
...
549.0
494.4
465.1
434.2
405.7
267.4
249.1
239.3
228.9
219.3
110.2
106.2
102.0
98.14
++ Values in these tables are approximate. Where accurate figures are required, or for ratios not shown, consult the Factory. WR2 referred to drive low speed shaft equals (exact
total ratio)2 times WR2 referred to high speed shaft.
70 (161-110)
THIS PAGE INTENTIONALLY LEFT BLANK
(161-110) 71
Type DHL1 Single Reduction
Sizes M1130 M1160/Dimensions Inches

N
SE TAPPED HOLE
SF DEPTH
B
USABLE
LENGTH
SB
SC
SA
TA
TE TAPPED HOLE
TF DEPTH
TC
M
A
USABLE
LENGTH
TB
O
EE
RA
4-HOLES
DD DIA. FOR
CLASS 5 B OLT
CC
AA
8-HOLES
U DIA . FOR
CLASS 5 BOLT
BOTH
ENDS
CC
Q
M
Q
M
BB
EE
GA
GB
DRIVE
SIZE
Ratios
1.25-3.15
3.55-5.60
1.25-3.15
M1140
3.55-5.60
1.25-3.15
M1150 3.55-5.60
1.25-3.15
M1160
3.55-5.60
M1130
DRIVE
SIZE
M1130
M1140
M1150
M1160
Ratios
1.25-3.15
3.55-5.60
1.25-3.15
3.55-5.60
1.25-3.15
3.55-5.60
1.25-3.15
3.55-5.60
AA
3.94
9.84 2.64
2.20
3.94
12.44 2.64
2.76
3.94
12.99 3.54
3.35
3.94 14.57 3.54
BB
CC
DD
EE
3.43
4.33
3.15 15.83 0.94 16.69 1.18
3.07
5.12
3.54 17.56 1.10 18.58 1.18
3.94
5.91
3.94 19.69 1.10 20.87 1.18
3.74
6.69
3.94 21.26 1.10 22.05 1.18
GA
GB
7.87 3.94
7.87 3.54 26.14 11.42 4.92
High Speed Shaft
SA
SB
SC
SE
SF
1.6535 k6
1.77
0.47
2.48
M16
1.42
2.1654 m6
2.32
0.63
2.48
M20
1.65
2.7559 m6
2.93
0.79
3.54
M20
1.65
2.9528 m6
3.15
0.79
3.54
M20
1.65
10.83
8.86
11.79
4.57 9.06 4.72 9.06 3.94 29.61 13.39 5.91 10.71
10.62
12.52
4.76 10.63 5.91 9.96 4.96 33.66 14.57 6.50 12.20 11.73
13.07
4.92 11.71 6.5 10.93 5.41 36.61 15.94 6.99 12.89
13.07
4.41
Low Speed Shaft

S
TA
TB
TC
TE
TF
1.5748 k6
1.1024 j6
1.6535 k6
1.2598 k6
1.9685 k6
1.3780 k6
2.1654 m6
1.6535 k6
1.69
1.22
1.77
1.38
2.11
1.50
2.32
1.77
0.47
0.31
0.47
0.39
0.55
0.39
0.63
0.47
3.94
1.97
3.94
2.76
3.94
3.15
M16
M10
M16
M12
M16
M12
M20
M16
1.42
0.87
1.42
1.10
1.42
1.10
1.65
1.42
3.94
9.72
RA
1.57
3.23
0.98
1.97
3.43
1.18
1.97
3.41
1.18
1.97
3.35
1.18
Approx
Wt
lb
0.57
8.35
28.50
6.10
635
0.73
9.29
31.97
7.09
919
0.73
10.43
36.02
7.68
1155
0.94
11.02
38.98
8.37
1350
++ Drawings are representative of this series of drives and do not agree in exact detail for all sizes. Gear drives are for horizontal floor mounted operation unless specifically stated
otherwise. Consult the Factory for other mountings. Dimensions are for reference only and are subject to change without notice unless certified.
Key Sizes per ISO/R773-1969, Form B. Tapped center hole to DIN 332, threads 6H.
zz Single low speed shaft extension is standard; double extension is special.
44 j6 tolerance for shaft diameters 1.2 and less, k6 tolerance for shaft diameters over 1.2 to 2.0, m6 tolerance for shaft diameters above 2.0.
72 (161-110)
Type DHL1 Single Reduction

N
SE TAPPED HOLE
SF DEPTH
B
USABLE
LENGTH
SB
SC
SA
TA
TE TAPPED HOLE
TF DEPTH
TC
M
A
USABLE
LENGTH
TB
O
EE
4-HOLES
DD DIA. FOR
CLASS 5 B OLT
RA
CC
AA
8-HOLES
U DIA . FOR
CLASS 5 BOLT
BOTH
ENDS
CC
Q
M
Q
M
BB
EE
GA
GB
DRIVE
SIZE
M1170
M1180
M1190
M1200
DRIVE
SIZE
M1170
M1180
M1190
M1200
Ratios
1.25-3.15
3.55-5.60
1.25-3.15
3.55-5.60
1.25-3.15
3.55-5.60
1.25-3.15
3.55-5.60
Ratios
1.25-3.15
3.55-5.60
1.25-3.15
3.55-5.60
1.25-3.15
3.55-5.60
1.25-3.15
3.55-5.60
AA
BB
RA
7.68 3.94 23.23 1.38 24.80 1.18
3.54
1.18
3.94
8.86 3.94 26.38 1.38 26.38 1.18
5.51 16.14 7.09 14.17 6.69 46.06 18.50 8.27 15.16 15.55 1.97
3.74
1.18
4.13
10.24 4.33 29.33 1.65 29.53 1.18
5.91 18.31 7.09 17.13 6.30 51.97 20.08 8.46 17.42
17.52
3.35
16.34
4.33
1.18
5.12
11.42 5.91 34.84 1.65 35.43 1.57
6.30 21.46 7.87 22.05 6.50 60.83 22.44 9.65 19.88 18.70 3.35
4.33
1.38
3.94
5.12 18.50 4.33

6.10
21.26 5.91
4.92
6.10
25.20 7.28
6.30
CC
DD
EE
Low Speed Shaft

S
SA
SB
SC
GA
GB
High Speed Shaft

SE
SF
3.1496 m6
3.35
0.87
3.94
M20
1.65
3.7402 m6
3.94
0.98
3.94
M24
1.97
3.9370 m6
4.17
1.10
4.92
M24
1.97
5.5118 m6
5.83
1.42
6.30
M24
1.97
2.5591 m6
1.9685 k6
2.7559 m6
2.3622 m6
3.1496 m6
2.7559 m6
3.3465 m6
3.1496 m6
14.33
5.51 13.78 5.91 12.60 5.12 40.94 16.14 7.09 13.98
1.97
13.15
4.92
16.93 4.53
3.94
Approx
Wt
lb
TA
TB
TC
TE
TF
2.72
2.11
2.93
2.52
3.35
2.93
3.54
3.35
0.71
0.55
0.79
0.71
0.87
0.79
4.92
3.94
M20
M16
1.65
1.42
0.94
12.40
43.31
8.46
1772
4.92
M20
1.65
1.10
13.19
48.43
9.65
2564
6.10
4.92
M20
1.65
1.38
14.76
54.33
10.43
3113
0.87
6.10
M20
1.65
1.38
17.72
63.98
11.61
4747
(161-110) 73
Type DHC1 Single Reduction

N
B
USABLE
LENGTH
SC
C Dimension
Nominal
Ratio
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
SE (TAPPED HOLE)
SF (DEPTH)
SB S
SA
T
TB
TA
T
TE (TAPPED HOLE)
TF (DEPTH)
TC
M
A
USABLE
LENGTH
O
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
RA
CC
M1130
11.14
10.59
10.04
9.61
9.33
8.98
8.66
8.43
8.19
7.95
7.76
7.60
7.48
7.28
BOTH
ENDS
8-HOLES
U DIA . FOR
GRADE 5 BOLT
CC
Q
M
BB
EE
M1150
13.86
13.19
12.48
11.97
11.54
11.18
10.75
10.43
10.12
9.88
9.65
9.41
9.25
9.09
AA
Q
M
DRIVE SIZE
M1140
12.36
11.77
11.14
10.67
10.24
9.96
9.61
9.33
9.06
8.82
8.62
8.43
8.27
8.15
GA
GB
DRIVE
SIZE
Ratios
1.25-3.15
3.55-5.60
1.25-3.15
M1140
3.55-5.60
1.25-3.15
M1150
3.55-5.60
M1130
DRIVE
SIZE
M1130
M1140
M1150
Ratios
1.25-3.15
3.55-5.6
1.25-3.15
3.55-5.6
1.25-3.15
3.55-5.6
A
4.92
3.94
4.92
3.94
6.30
5.12
AA
BB
CC
DD
EE
GA
GB
9.84
5.91
3.43
3.15
8.35
0.94
16.69
1.18
4.41
7.87
3.94
7.87
3.94
26.14 11.42
4.92
12.44
6.10
3.07
3.54
9.29
1.10
18.58
1.18
4.57
9.06
4.72
9.06
4.72
29.61 13.39
5.91
12.99
7.09
3.94
3.94
10.43
1.10
20.87
1.18
4.76
10.63
5.91
9.96
5.67
33.66 14.57
6.50
Low Speed Shaft

S
SA
SB
SC
High Speed Shaft

SE
SF
3.5433 m6
3.74
0.98
4.92
M24
1.97
4.3307 m6
4.57
1.10
4.92
M24
1.97
4.7244 m6
5.00
1.26
6.30
M24
1.97
2.5591 m6
1.9685 k6
2.7559 m6
2.1654 m6
3.1496 m6
2.5591 m6
12.01
10.83
12.99
13.98
11.81
14.76
15.67
13.58
12.80
RA
1.57
3.23
0.98
1.97
3.43
1.18
1.97
3.41
1.18
Approx
Wt
lb
TA
TB
TC
TE
TF
2.72
2.11
2.93
2.32
3.35
2.72
0.71
0.55
0.79
0.63
0.87
0.71
4.33
3.54
4.33
3.54
5.51
4.33
M20
M16
1.65
1.42
0.57
8.35
28.50
6.10
760
M20
1.65
0.73
9.29
31.97
7.09
1050
M20
1.65
0.73
10.43
36.02
7.68
1350
74 (161-110)

N
B
USABLE
LENGTH
SC
C Dimension
Nominal
Ratio
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
SE (TAPPED HOLE)
SF (DEPTH)
SB S
SA
T
TB
TA
T
TE (TAPPED HOLE)
TF (DEPTH)
TC
M
A
USABLE
LENGTH
O
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
RA
CC
BOTH
ENDS
8-HOLES
U DIA . FOR
GRADE 5 BOLT
CC
Q
M
BB
EE
M1190
21.73
20.67
19.61
18.78
18.11
17.44
16.89
16.38
15.91
15.47
15.08
14.80
14.57
14.29
AA
Q
M
DRIVE SIZE
M1170
M1180
17.01
19.69
16.22
18.74
15.35
17.80
14.76
17.13
14.17
16.54
13.70
15.79
13.31
15.31
12.91
14.84
12.52
14.49
12.13
14.13
11.81
13.78
11.61
13.43
11.42
13.19
11.22
12.99
M1160
15.28
14.57
13.78
13.19
12.76
12.28
11.93
11.57
11.22
10.87
10.59
10.43
10.24
10.08
GA
GB
DRIVE
SIZE
M1160
M1170
M1180
M1190
DRIVE
SIZE
M1160
M1170
M1180
M1190
Ratios
1.25-2.8
3.15-5.6
1.25-3.55
4.0-5.6
1.25-2.8
3.15-5.6
1.25-4.0
4.5-5.6
7.68
6.30
7.68
6.30
7.48
6.10
9.25
6.10
Ratios
1.25-2.8
3.15-5.6
1.25-3.55
4.0-5.6
1.25-2.8
3.15-5.6
1.25-4.0
4.5-5.6
AA
BB
CC
DD
EE
GA
GB
14.57
8.66
3.74
3.94
11.02
1.10
22.05
1.18
4.92
11.71
6.50
10.93
6.10
36.61 15.94
6.99
17.80
16.93
8.66
3.94
3.94
11.81
1.38
24.80
1.18
5.51
13.78
5.91
12.60
6.30
40.94 16.14
7.09
18.11
18.50
8.66
3.94
3.94
13.19
1.38
26.38
1.18
5.51
16.14
7.09
14.17
7.68
46.06 18.50
8.27
19.09
21.26 10.04
4.13
4.33
14.76
1.65
29.53
1.18
5.91
18.31
7.09
17.13
8.86
51.97 20.08
8.46
21.46
Low Speed Shaft
High Speed Shaft
SA
SB
SC
SE
SF
5.1181 m6
5.39
1.26
7.09
M24
1.97
5.1181 m6
5.39
1.26
7.09
M24
1.97
5.9055 m6
6.22
1.42
7.09
M24
1.97
6.6929 m6
7.05
1.57
8.66
M24
1.97
TA
TB
TC
TE
TF
3.9370 m6
3.1496 m6
4.3307 m6
3.1496 m6
4.7244 m6
3.5433 m6
5.1181 m6
3.7402 m6
4.17
3.35
4.57
3.35
5.00
3.74
5.39
3.94
1.10
0.87
1.10
0.87
1.26
0.98
1.26
0.98
7.09
5.51
7.09
5.51
7.09
5.51
7.87
5.51
M24
M20
M24
M20
M24
M20
1.97
1.65
1.97
1.65
1.97
1.65
M24
1.97
O
17.05
15.47
17.17
15.59
18.11
16.73
20.79
17.64
RA
1.97
3.35
1.18
1.97
3.54
1.18
1.97
3.74
1.18
3.35
4.33
1.18
Approx
Wt
lb
0.94
11.02
38.98
8.37
1760
0.94
12.40
43.31
8.46
2030
1.10
13.19
48.43
9.65
2890
1.38
14.76
54.33
10.43
3820
(161-110) 75
Type DHC2 Double Reduction

N
B
USABLE
LENGTH
SC
SE (TAPPED HOLE)
SF (DEPTH)
SB S
SA
TA
TE (TAPPED HOLE)
TF (DEPTH)
TC
TB
A
USABLE
LENGTH
O
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
W
C
RA
CC
AA
BOTH
ENDS
8-HOLES
U DIA . FOR
GRADE 5 BOLT
CC
Q
M
Q
M
BB
EE
GA
GB
DRIVE
SIZE
Ratios
6.3-16.0
18.0-28.0
6.3-16.0
M1140
18.0-28.0
6.3-16.0
M1150
18.0-28.0
M1160 6.3-28.0
M1130
DRIVE
SIZE
M1130
M1140
M1150
M1160
Ratios
6.3-16.0
18.0-28.0
6.3-16.0
18.0-28.0
6.3-16.0
18.0-28.0
6.3 - 16.0
18.0 - 28.0
AA
3.94
9.84 4.72
2.20
3.94
12.44 6.10
2.76
3.94
12.99 6.10
3.35
3.94 14.57 7.48
BB
CC
DD
EE
3.43
11.81 3.15
8.35
0.94 16.69 1.18
3.07
13.39 3.54
9.29
1.10 18.58 1.18
3.94
15.16 3.94 10.43
1.10 20.87 1.18
3.74
16.93 3.94 11.02
1.10 22.05 1.18
GA
GB
7.87 3.94
SB
SC
SE
SF
3.5433 m6
3.74
0.98
4.33
M24
1.97
4.3307 m6
4.57
1.10
5.51
M24
1.97
4.7244 m6
5.00
1.26
5.51
M24
1.97
5.1181 m6
5.39
1.26
7.09
M24
1.97
7.87 3.94 26.14 11.42 4.92 11.61
High Speed Shaft
SA
10.83
8.86
11.79
4.57 9.06 4.72 9.06 4.72 29.61 13.39 5.91 13.98
10.62
12.52
4.76 10.63 5.91 9.96 5.67 33.66 14.57 6.50 14.69
11.73
4.92 11.71 6.50 10.93 6.10 36.61 15.94 6.99 16.61 13.07
4.41
Low Speed Shaft

S
TA
TB
TC
TE
TF
1.5748 k6
1.1024 j6
1.6535 k6
1.2598 k6
1.9685 k6
1.3780 k6
2.1654 m6
1.6535 k6
1.69
1.22
1.77
1.37
2.11
1.50
2.32
1.77
0.47
0.31
0.47
0.39
0.55
0.39
0.63
0.47
3.94
1.97
3.94
2.76
3.94
3.15
M16
M10
M16
M12
M16
M12
M20
M16
1.42
0.87
1.42
1.10
1.42
1.10
1.65
1.42
3.94
RA
1.57
3.23
0.98
1.97
3.43
1.18
1.97
3.41
1.18
1.97
3.35
1.18
Approx
Wt
lb
0.57
8.35
28.50
6.10
767
0.73
9.29
31.97
7.09
1109
0.73
10.43
36.02
7.68
1390
0.94
11.02
38.98
8.37
1620
76 (161-110)

N
B
USABLE
LENGTH
SC
SE (TAPPED HOLE)
SF (DEPTH)
SB S
SA
TA
TE (TAPPED HOLE)
TF (DEPTH)
TC
TB
A
USABLE
LENGTH
O
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
W
C
RA
CC
AA
BOTH
ENDS
8-HOLES
U DIA . FOR
GRADE 5 BOLT
CC
Q
M
Q
M
BB
EE
GA
GB
DRIVE
SIZE
Ratios
6.3-16.0
18.0-28.0
M1180 6.3-28.0
6.3-16.0
M1190
18.0-28.0
5.00-12.5
M1200
14.0-22.4
5.60-14.0
M1210
16.0-25.0
M1170
DRIVE
SIZE
M1170
M1180
M1190
M1200
M1210
Ratios
6.3 - 16.0
18.0 - 28.0
6.3 - 16.0
18.0 - 28.0
6.3 - 16.0
18.0 - 28.0
5.00-12.5
14.0-22.4
5.60-14.0
16.0-25.0
A
4.92
3.94
5.12
6.10
4.92
6.10
6.30
6.10
6.30
AA
BB
CC
DD
EE
GA
GB
16.93
7.48
3.94
19.09 3.94 11.81 1.38 24.80 1.18
5.51 13.78 5.91 12.60
18.50
7.48
3.94
22.05 3.94 13.19 1.38 26.38 1.18
5.51 16.14 7.09 14.17
21.26
8.86
4.13
24.80 4.33 14.76 1.65 29.53 1.18
5.91 18.31 7.09 17.13
25.20 10.63
5.12
27.56 5.91 18.70 1.65 35.43 1.57
25.20 10.63
5.12
28.54 5.91 17.72 1.65 35.43 1.57
SB
SC
SE
SF
5.1181 m6
5.39
1.26
7.09
M24
1.97
5.9055 m6
6.22
1.42
7.09
M24
1.97
6.6929 m6
7.05
1.57
7.87
M24
1.97
7.4803 m6
7.87
1.77
9.84
M24
1.97
7.8740 m6
8.27
1.77
9.84
M24
1.97
14.33
1.97
13.15
7.68 46.06 18.50 8.27 17.91 15.55 1.97
17.52
8.86 51.97 20.08 8.46 20.28
3.35
16.34
6.30 40.94 16.14 7.09 16.93
RA
3.54
1.18
1.18
4.33
1.18
6.30 21.46 7.87 22.05 12.40 60.83 22.44 9.65 23.03 18.70 3.35
4.33
1.38
6.30 21.46 7.87 22.05 11.42 60.83 22.44 9.65 23.03 18.70 3.35
4.33
1.38
High Speed Shaft
SA
3.74
Low Speed Shaft

S
1.65
1.42
0.94
12.40
43.31
8.46
2132
M20
1.65
1.10
13.19
48.43
9.65
3086
M20
1.65
1.38
14.76
54.33
10.43
3748
6.10
M20
1.65
1.38
17.72
63.98
11.61
5716
6.10
M20
1.65
1.38
17.72
63.98
11.61
5947
TA
TB
TC
TE
TF
2.5591 m6
1.9685 k6
2.7559 m6
2.3622 m6
3.1496 m6
2.7559 m6
3.3465 m6
3.1496 m6
3.3465 m6
3.1496 m6
2.72
2.11
2.93
2.52
3.35
2.93
3.54
3.35
3.54
3.35
0.71
0.55
0.79
0.71
0.87
0.79
4.92
3.94
M20
M16
4.92
6.10
4.92
0.87
0.87
Approx
Wt
lb
(161-110) 77

N
N
X
B
USEABLE
LENGTH
SA
SB
S
6-HOLES
U DIA . F OR
GRADE 5 BOLT
SC
SE (TAPPED HOLE)
SF (DEPTH)
A
USEABLE
LENGTH
TA
TB
TC
O
TE (TAPPED HOLE)
TF (DEPTH )
W
C
Q
M
DRIVE
SIZE
M1220
M1230
M1240
M1250
Q
M
FF
GA
G
K
FF
GA
9.45
9.45
10.63
10.63
13.78
13.78
16.14
16.14
31.30
32.87
36.61
38.58
22.83
21.26
26.38
24.41
36.61
36.61
43.31
43.31
3.94
3.94
4.72
4.72
4.33
4.33
5.51
5.51
28.15
28.15
32.68
32.68
34.45
34.45
39.57
39.57
18.50
16.93
20.87
18.90
70.87
70.87
82.48
82.48
31.89
31.89
35.43
35.43
13.19
13.19
14.76
14.76
31.10
31.10
35.24
35.24
26.77
26.77
30.12
30.12
4.92
4.92
5.51
5.51
2.36
2.36
2.56
2.56
Low Speed Shaft
DRIVE
SIZE
M1220
M1230
M1240
M1250
BOTH
ENDS
High Speed Shaft
SA
SB
SC
SE
SF
TA
TB
TC
TE
TF
8.6614 m6
8.6614 m6
9.8425 m6
9.8425 m6
9.09
9.09
10.31
10.31
1.97
1.97
2.20
2.20
12.60
12.60
14.17
14.17
M30
M30
M30
M30
2.36
2.36
2.36
2.36
4.3307 m6
4.3307 m6
4.7244 m6
4.7244 m6
4.57
4.57
5.00
5.00
1.10
1.10
1.26
1.26
8.27
8.27
9.06
9.06
M24
M24
M24
M24
1.97
1.97
1.97
1.97
Approx
Wt
lb
1.89
1.89
2.17
2.17
18.31
18.31
21.65
21.65
71.46
71.46
83.07
83.07
17.32
17.32
19.09
19.09
3.31
3.31
3.23
3.23
27.87
27.87
31.42
31.42
9859
10361
14310
15188
78 (161-110)
Type DHC3 Triple Reduction

N
B
USABLE
LENGTH
SC
SE (TAPPED HOLE)
SF (DEPTH)
SB S
SA
TA
TE (TAPPED HOLE)
TF (DEPTH)
TC
TB
A
USABLE
LENGTH
O
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
W
C
RA
CC
AA
BOTH
ENDS
8-HOLES
U DIA . FOR
GRADE 5 BOLT
CC
Q
M
Q
M
BB
EE
GA
GB
DRIVE
A
AA
SIZE Ratios
M1130 31.5-140.0 2.20 9.84
M1140 31.5-140.0 2.20 12.44
31.5-90.0 2.95
M1150
12.99
100.0-140.0 2.68
M1160 31.5-140.0 2.76 14.57
DRIVE
SIZE
Ratios
M1130
M1140
31.5-140.0
31.5-140.0
31.5-90.0
100.0-140.0
31.5-90.0
100.0-140.0
M1150
M1160
BB
CC
DD
EE
4.72
6.10
3.43 11.81 3.15

3.07 13.39 3.54
8.35 0.94 16.69 1.18

9.29 1.10 18.58 1.18
4.41
4.57
7.87 3.94
9.06 4.72
6.10
3.94 15.16 3.94
10.43 1.10 20.87 1.18
4.76
10.63 5.91
7.48
3.74 16.93 3.94
11.02 1.10 22.05 1.18
4.92
11.71 6.50
Low Speed Shaft

SA
3.74
4.57
SB
0.98
1.10
SC
4.33
5.51
SE
M24
M24
SF
1.97
1.97
4.7244 m6
5.00
1.26
5.51
M24
1.97
5.39
1.26
7.09
GB
M24
1.97
T
0.9449 j6
0.9843 j6
1.1811 j6
0.9843 j6
1.3780 k6
1.1811 j6
TA
1.06
1.10
1.30
1.14
1.50
1.30
TB
0.31
0.31
0.31
0.39
0.31
7.87 3.94 26.14 11.42 4.92 11.61

9.06 4.72 29.61 13.39 5.91 13.98
8.86
9.81
11.32
9.96 5.67 33.66 14.57 6.50 14.69
11.06
10.93 6.10 36.61 15.94 6.99 16.61 11.89
TC
1.97
1.97
2.91
2.64
2.76
RA
1.57
1.97
3.23
3.43
0.98
1.18
1.97
3.41
1.18
1.97
3.35
1.18
TE
M8
M10
TF
0.75
0.87
0.57
0.73
8.35
9.29
28.50
31.97
6.10
7.09
Approx
Wt
lb
771
1123
M10
0.87
0.73
10.43
36.02
7.68
1400
M12
M10
1.10
0.87
0.94
11.02
38.98
8.37
1687
High Speed Shaft
S
3.5433 m6
4.3307 m6
5.1181 m6
GA
(161-110) 79

N
B
USABLE
LENGTH
SC
SE (TAPPED HOLE)
SF (DEPTH)
SB S
SA
TA
TE (TAPPED HOLE)
TF (DEPTH)
TC
TB
A
USABLE
LENGTH
O
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
W
C
RA
CC
AA
BOTH
ENDS
8-HOLES
U DIA . FOR
GRADE 5 BOLT
CC
Q
M
Q
M
EE
BB
GA
GB
DRIVE
SIZE
M1170
M1180
M1190
M1200
M1210
DRIVE
SIZE
Ratios
31.5-140.0 3.94
31.5-140.0 3.94
31.5-140.0 3.94
25.0-112.0 5.12
28.0-125.0 5.12
Ratios
M1170
M1180
31.5-140.0
31.5-140.0
31.5-90.0
M1190
100.0-140.0
M1200 25.0-112.0
M1210 28.0-125.0
AA
BB
CC
DD
EE
GA
16.93
18.50
21.26
25.20
25.20
7.48
7.48
8.86
10.63
10.63
3.94
3.94
4.13
5.12
5.12
19.09
22.05
24.80
27.56
28.54
3.94
3.94
4.33
5.91
5.91
11.81
13.19
14.76
18.70
17.72
1.38
1.38
1.65
1.65
1.65
24.80
26.38
29.53
35.43
35.43
1.18
1.18
1.18
1.57
1.57
5.51
5.51
5.91
6.30
6.30
13.78
16.14
18.31
21.46
21.46
5.91
7.09
7.09
7.87
7.87
Low Speed Shaft

S
GB
12.60 6.30 40.94

14.17 7.68 46.06
17.13 8.86 51.97
22.05 12.40 60.83
22.05 11.42 60.83
RA
16.14
18.50
20.08
22.44
22.44
7.09
8.27
8.46
9.65
9.65
16.93
17.91
20.28
23.03
23.03
13.15
14.37
15.22
17.52
17.52
1.97
1.97
3.35
3.35
3.35
3.54
3.74
4.33
4.33
4.33
1.18
1.18
1.18
1.38
1.38
High Speed Shaft
5.1181 m6
5.9055 m6
SA
5.39
6.22
SB
1.26
1.42
SC
7.09
7.09
SE
M24
M24
SF
1.97
1.97
6.6929 m6
7.05
1.57
7.87
M24
1.97
7.4803 m6
7.8740 m6
7.87
8.27
1.77
1.77
9.84
9.84
M24
M24
1.97
1.97
T
1.5748 k6
1.7717 k6
2.1654 m6
1.6535 k6
2.5591 m6
2.5591 m6
TA
1.69
1.91
2.32
1.77
2.72
2.72
TB
0.47
0.55
0.63
0.47
0.71
0.71
TC
3.94
3.94
3.94
4.92
4.92
TE
M16
M16
M20
M16
M20
M20
TF
1.42
1.42
1.65
1.42
1.65
1.65
Approx
Wt
lb
8.46 2132
9.65 3131
0.94
1.10
12.40
13.19
43.31
48.43
1.38
14.76
54.33
10.43
3858
1.38
1.38
17.72
17.72
63.98
63.98
11.61
11.61
5791
6023
80 (161-110)

N
N
X
B
USEABLE
LENGTH
SA
SB
S
6-HOLES
U DIA . FOR
GRADE 5 BOLT
SC
SE (TAPPED HOLE)
SF (DEPTH)
A
USEABLE
LENGTH
TA
TB
TC
O
TE (TAPPED HOLE)
TF (DEPTH )
Q
M
DRIVE
SIZE
M1220
M1230
M1240
M1250
DRIVE
SIZE
M1220
M1230
M1240
M1250
BOTH
ENDS
Q
M
FF
GA
G
K
FF
GA
6.69
6.69
7.87
7.87
13.78
13.78
16.14
16.14
40.16
41.73
46.85
48.82
22.83
21.26
26.38
24.41
36.61
36.61
43.31
43.31
3.94
3.94
4.72
4.72
4.33
4.33
5.51
5.51
28.15
28.15
32.68
32.68
34.45
34.45
39.57
39.57
18.50
16.93
20.87
18.90
70.87
70.87
82.48
82.48
31.89
31.89
35.43
35.43
13.19
13.19
14.76
14.76
31.10
31.10
35.24
35.24
23.62
23.62
26.57
26.57
4.92
4.92
5.51
5.51
2.36
2.36
2.56
2.56
Low Speed Shaft
High Speed Shaft
SA
SB
SC
SE
SF
TA
TB
TC
TE
TF
8.6614 m6
8.6614 m6
9.8425 m6
9.8425 m6
9.09
9.09
10.31
10.31
1.97
1.97
2.20
2.20
12.60
12.60
14.17
14.17
M30
M30
M30
M30
2.36
2.36
2.36
2.36
2.7559 m6
2.7559 m6
3.5433 m6
3.5433 m6
2.93
2.93
3.74
3.74
0.79
0.79
0.98
0.98
6.30
6.30
7.09
7.09
M24
M24
M24
M24
1.97
1.97
1.97
1.97
Approx
Wt
lb
1.89
1.89
2.17
2.17
18.31
18.31
21.65
21.65
71.46
71.46
83.07
83.07
17.32
17.32
19.09
19.09
3.31
3.31
3.23
3.23
22.95
22.95
26.50
26.50
9905
10410
14445
15329
(161-110) 81
Type DHT2 Double Reduction with TA Taper Bushing

PA
X
Refer to Page 168 for standard bushing bores.

PB
TA
TB
TE (TAPPED HOLE)
TF (DEPTH )
TC
A
USABLE
LENGTH
O
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
W
C
RA
CC
AA
E
8-HOLES
U DIA . FOR
GRADE 5 BOLT
BOTH
ENDS
CC
Q
M
Q
M
BB
EE
GA
J
GB
DRIVE
SIZE Ratios
6.3-16.0
M1130
18.0-28.0
6.3-16.0
M1140
18.0-28.0
6.3-16.0
M1150
18.0-28.0
M1160 6.3-28.0
DRIVE
SIZE
M1130
M1140
M1150
M1160
AA
BB
3.94
9.84 3.43 11.81
2.20
3.94
12.44 3.07 13.39
2.76
3.94
12.99 3.94 15.16
3.35
3.94 14.57 3.74 16.93
Ratios
6.3-16.0
18.0-28.0
6.3-16.0
18.0-28.0
6.3-16.0
18.0-28.0
6.3-16.0
18.0-28.0
CC
DD
EE
GA
GB
3.15
8.35 0.94 16.69 1.18
4.41
7.87 3.94
7.87 3.94 26.14 11.42 4.92
3.54
9.29 1.10 18.58 1.18
4.57
9.06 4.72
9.06 4.72 29.61 13.39 5.91
3.94 10.43 1.10 20.87 1.18
4.76 10.63 5.91
9.96 5.67 33.66 14.57 6.50
3.94 11.02 1.10 22.05 1.18
4.92 11.71 6.50 10.93 6.10 36.61 15.94 6.99
High Speed Shaft

T
1.5748 k6
1.1024 j6
1.6535 k6
1.2598 k6
1.9685 k6
1.3780 k6
2.1654 m6
1.6535 k6
TA
1.69
1.22
1.77
1.37
2.11
1.50
2.32
1.77
TB
0.47
0.31
0.47
0.39
0.55
0.39
0.63
0.47
TC
3.94
1.97
3.94
2.76
3.94
3.15
3.94
TE
M16
M10
M16
M12
M16
M12
M20
M16
TF
1.42
0.87
1.42
1.10
1.42
1.10
1.65
1.42
O
10.83
8.86
11.79
10.62
12.52
11.73
13.07
RA
9.51 7.28
1.57
3.23
0.98
2.20 10.50 8.07
1.97
3.43
1.18
2.20 10.94 8.86
1.97
3.41
1.18
2.36 11.93 9.45
1.97
3.35
1.18
2.20
PA
PB
Approx
Wt
lb
0.57
8.35
28.50
6.10
714
0.73
9.29
31.97
7.09
1023
0.73
10.43
36.02
7.68
1257
0.94
11.02
38.98
8.37
1444
++ Drawings are representative of this series of drives and do not agree in exact detail for all sizes. Gear drives are for horizontal floor mounted operation unless
specifically stated otherwise. Consult the Factory for other mountings. Dimensions are for reference only and are subject to change without notice unless certified.
82 (161-110)
Type DHT2 Double Reduction with TA Taper Bushing

PA
X
PB
TA
TB
TE (TAPPED HOLE)
TF (DEPTH )
TC
A
USABLE
LENGTH
O
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
W
C
RA
CC
AA
E
8-HOLES
U DIA . FOR
GRADE 5 BOLT
BOTH
ENDS
CC
Q
M
Q
M
BB
EE
GA
GB
DRIVE
SIZE Ratios
6.3-16.0
M1170
18.0-28.0
M1180 6.3-28.0
6.3-16.0
M1190
18.0-28.0
5.0-12.5
M1200
14.0-22.4
5.6-14.0
M1210
16.0-25.0
DRIVE
SIZE
M1170
M1180
M1190
M1200
M1210
A
4.92
3.94
5.12
6.10
4.92
6.10
6.30
6.10
6.30
AA
BB
CC
DD
EE
GA
GB
PA
PB
14.33
2.36 11.81 10.24 1.97
13.15
7.68 46.06 18.50 8.27 15.55 2.36 13.19 11.02 1.97
17.52
8.86 51.97 20.08 8.46
2.56 13.98 11.61 3.35
16.34
RA
3.54
1.18
3.74
1.18
4.33
1.18
16.93 3.94 19.09 3.94 11.81 1.38 24.80 1.18
5.51 13.78 5.91 12.60
18.50 3.94 22.05 3.94 13.19 1.38 26.38 1.18
5.51 16.14 7.09 14.17
21.26 4.13 24.80 4.33 14.76 1.65 29.53 1.18
5.91 18.31 7.09 17.13
25.20 5.12 27.56 5.91 18.70 1.65 35.43 1.57
6.30 21.46 7.87 22.05 12.40 60.83 22.44 9.65 18.70
...
13.03 11.00 3.35
4.33
1.38
25.20 5.12 28.54 5.91 17.72 1.65 35.43 1.57
6.30 21.46 7.87 22.05 11.42 60.83 22.44 9.65 18.70
...
13.03 11.00 3.35
4.33
1.38
Approx
Wt
lb
Ratios
6.3-16.0
18.0-28.0
6.3-16.0
18.0-28.0
6.3-16.0
18.0-28.0
5.0-12.5
14.0-22.4
5.6-14.0
16.0-25.0
High Speed Shaft
6.30 40.94 16.14 7.09
TA
TB
TC
TE
TF
2.5591 m6
1.9685 k6
2.7559 m6
2.3622 m6
3.1496 m6
2.7559 m6
3.3465 m6
3.1496 m6
3.3465 m6
3.1496 m6
2.72
2.11
2.93
2.52
3.35
2.93
3.54
3.35
3.54
3.35
0.71
0.55
0.79
0.71
0.87
0.79
4.92
3.94
M20
M16
1.65
1.42
0.94
12.40
43.31
8.46
2132
4.92
M20
1.65
1.10
13.19
48.43
9.65
3086
6.10
4.92
M20
1.65
1.38
14.76
54.33
10.43
3748
0.87
6.10
M20
1.65
1.38
17.72
63.98
11.61
5311
0.87
6.10
M20
1.65
1.38
17.72
63.98
11.61
5509
++ Drawings are representative of this series of drives and do not agree in exact detail for all sizes. Gear drives are for horizontal floor mounted operation unless specifically
stated otherwise. Consult the Factory for other mountings. Dimensions are for reference only and are subject to change without notice unless certified.
(161-110) 83
Type DHT3 Triple Reduction with TA Taper Bushing

PA
X

PB
TA
TB
TE (TAPPED HOLE)
TF (DEPTH )
TC
A
USABLE
LENGTH
O
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
W
C
RA
CC
AA
E
8-HOLES
U DIA . FOR
GRADE 5 BOL T
BOTH
ENDS
CC
Q
M
Q
M
BB
EE
GA
GB
DRIVE
A
AA
SIZE Ratios
M1130 31.5-140.0 2.20 9.84
M1140 31.5-140.0 2.20 12.44
31.5-90.0 2.95
M1150
12.99
100.0-140.0 2.68
M1160 31.5-140.0 2.76 14.57
DRIVE
SIZE
Ratios
M1130
M1140
31.5-140.0
31.5-140.0
31.5-90.0
100.0-140.0
31.5-90.0
100.0-140.0
M1150
M1160
BB
CC
3.43 11.81 3.15

3.07 13.39 3.54
DD
EE
8.35 0.94 16.69 1.18

9.29 1.10 18.58 1.18
3.94 15.16 3.94 10.43 1.10 20.87 1.18

3.74 16.93 3.94 11.02 1.10 22.05 1.18
F
4.41
4.57
GA
7.87 3.94
9.06 4.72
GB
7.87 3.94 26.14 11.42 4.92

9.06 4.72 29.61 13.39 5.91
8.86
9.81
11.32
4.76 10.63 5.91 9.96 5.67 33.66 14.57 6.50
11.06
4.92 11.71 6.50 10.93 6.10 36.61 15.94 6.99 11.89
High Speed Shaft
PA
PB
RA
2.20 9.51 7.28

2.20 10.50 8.07
1.57
1.97
3.23
3.43
0.98
1.18
2.20 10.94 8.86
1.97
3.41
1.18
2.36 11.93 9.45
1.97
3.35
1.18
Approx
Wt
lb
TA
TB
TC
TE
TF
0.9449 j6
0.9843 j6
1.1811 j6
0.9843 j6
1.3780 k6
1.1811 j6
1.06
1.10
1.30
1.14
1.50
1.30
0.31
0.31
1.97
1.97
2.91
2.64
M8
M10
0.75
0.87
0.57
0.73
8.35
9.29
28.50
31.97
6.10
7.09
718
1039
M10
0.87
0.73
10.43
36.02
7.68
1260
M12
M10
1.10
0.87
0.94
11.02
38.98
8.37
1510
0.31
0.39
0.31
2.76
84 (161-110)
Type DHT3 Triple Reduction with TA Taper Bushing

PA
X

PB
TA
TB
TE (TAPPED HOLE)
TF (DEPTH )
TC
A
USABLE
LENGTH
O
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
W
C
RA
CC
AA
E
8-HOLES
U DIA . FOR
GRADE 5 BOL T
BOTH
ENDS
CC
Q
M
Q
M
BB
EE
GA
GB
DRIVE
SIZE
M1170
M1180
M1190
M1200
M1210
Ratios
AA
BB
CC
DD
EE
GA
31.5-140.0
31.5-140.0
31.5-140.0
25.0-112.0
28.0-125.0
3.94
3.94
3.94
5.12
5.12
16.93
18.50
21.26
25.20
25.20
3.94
3.94
4.13
5.12
5.12
19.09
22.05
24.80
27.56
28.54
3.94
3.94
4.33
5.91
5.91
11.81
13.19
14.76
18.70
17.72
1.38
1.38
1.65
1.65
1.65
24.80
26.38
29.53
35.43
35.43
1.18
1.18
1.18
1.57
1.57
5.51
5.51
5.91
6.30
6.30
13.78
16.14
18.31
21.46
21.46
5.91
7.09
7.09
7.87
7.87
DRIVE
SIZE
Ratios
M1170
M1180
31.5-140.0
31.5-140.0
31.5-90.0
100.0-140.0
25.0-112.0
28.0-125.0
M1190
M1200
M1210
GB
12.60 6.30 40.94

14.17 7.68 46.06
17.13 8.86 51.97
22.05 12.40 60.83
22.05 11.42 60.83
High Speed Shaft
16.14
18.50
20.08
22.44
22.44
7.09
8.27
8.46
9.65
9.65
PA
PB
13.15 2.36 11.81 10.24 1.97

14.37 2.36 13.19 11.02 1.97
15.22 2.56 13.98 11.61 3.35
17.52 . . . 13.03 11.00 3.35
17.52 . . . 13.03 11.00 3.35
RA
3.54
3.74
4.33
4.33
4.33
1.18
1.18
1.18
1.38
1.38
Approx
Wt
lb
TA
TB
TC
TE
TF
1.5748 k6
1.7717 k6
2.1654 m6
1.6535 k6
2.5591 m6
2.5591 m6
1.69
1.91
2.32
1.77
2.72
2.72
0.47
0.55
0.63
0.47
0.71
3.94
3.94
1.42
1.42
1.65
1.42
1.65
0.94
1.10
12.40
13.19
43.31
48.43
8.46
9.65
2132
3131
1.38
14.76
54.33
10.43
3858
4.92
M16
M16
M20
M16
M20
1.38
17.72
63.98
11.61
5385
0.71
4.92
M20
1.65
1.38
17.72
63.98
11.61
5385
3.94
(161-110) 85
Type DHJ2 Double Reduction with Hollow Low Speed Shaft

Shrink Disc Mounted
AF
AG
MINIMUM CLEARANCE
REQUIRED FOR REMOVAL
OF SHAFT GUARD
AD
PC
X
UE UA
Refer to Page 170 for hollow low speed and driven shaft
recommendations & dimensions.
AL
AJ
TA
TB
TE (TAPPED HOLE)
TF (DEPTH )
TC
A
USABLE
LENGTH
O
EE
W
C
RA
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
CC
AE
CLEARANCE
AA
E
8-HOLES
U DIA . FOR
GRADE 5 BOLT
BOTH
ENDS
CC
Q
M
Q
M
BB
EE
GA
GB
DRIVE
SIZE
Ratios
6.30 - 16.0
18.0 - 28.0
6.30 - 16.0
M1140
18.0 - 28.0
6.30 - 16.0
M1150
18.0 - 28.0
6.30 - 16.0
M1160
18.0 - 28.0
M1130
DRIVE
SIZE
M1130
M1140
M1150
M1160
Ratios
6.30 - 16.0
18.0 - 28.0
6.30 - 16.0
18.0 - 28.0
6.30 - 16.0
18.0 - 28.0
6.30 - 16.0
18.0 - 28.0
AA
3.94
2.20
3.94
2.76
3.94
3.35
3.94
M
4.92
5.91
6.50
6.99
AD
AE
AF
AG
AJ
AL
BB
CC
DD
EE
GA
GB
9.84 16.57 12.09
0.79
21.14 3.3465
8.46
3.43
11.81
3.15
8.35
0.94
16.69
1.18
4.41
7.87
3.94
7.87
3.94
26.14 11.42
12.44 18.82 13.54
0.75
23.66 3.9370 10.24
3.07
13.39
3.54
9.29
1.10
18.58
1.18
4.57
9.06
4.72
9.06
4.72
29.61 13.39
12.99 20.39 15.00
0.83
25.63 4.3307 10.98
3.94
15.16
3.94
10.43
1.10
20.87
1.18
4.76
10.63
5.91
9.96
5.67
33.66 14.57
14.57 22.20 15.67
0.75
27.83 5.1181 13.78
3.74
16.93
3.94
11.02
1.10
22.05
1.18
4.92
11.71
6.50
10.93
6.10
36.61 15.94
O
10.83
8.86
11.79
10.62
12.52
11.73
13.07
PC
RA
10.39
6.89
1.57
3.23
0.98
11.69
7.83
1.97
3.43
1.18
12.99
8.50
1.97
3.41
1.18
13.78
9.13
1.97
3.35
1.18
High Speed Shaft

T
1.5748 k6
1.1024 j6
1.6535 k6
1.2598 k6
1.9685 k6
1.3780 k6
2.1654 m6
1.6535 k6
TA
1.69
1.22
1.77
1.38
2.11
1.50
2.32
1.77
TB
0.47
0.31
0.47
0.39
0.55
0.39
0.63
0.47
TC
3.94
1.97
3.94
2.76
3.94
3.15
3.94
TE
M16
M10
M16
M12
M16
M12
M20
M16
TF
1.42
0.87
1.42
1.10
1.42
1.10
1.65
1.42
UA
UE
Approx
Wt
lb
0.57
3.5433
7.48
8.35
28.50
6.10
714
0.73
4.1339
9.25
9.29
31.97
7.09
1023
0.73
4.5276
9.37
10.43
36.02
7.68
1257
0.94
5.3150 10.24
11.02
38.98
8.37
1444
zz J7 tolerance.
H7 tolerance.
86 (161-110)
Type DHJ2 Double Reduction with Hollow Low Speed Shaft

Shrink Disc Mounted
AF
AG
MINIMUM CLEARANCE
OF SHAFT GUARD
AD
PC
X
UE UA
AL
AJ
TA
TB
TE (TAPPED HOLE)
TF (DEPTH )
TC
A
USABLE
LENGTH
O
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
W
C
RA
CC
AE
CLEARANCE
AA
E
8-HOLES
U DIA . FOR
GRADE 5 BOLT
BOTH
ENDS
CC
Q
M
Q
M
BB
EE
GA
GB
DRIVE
SIZE
M1170
M1180
M1190
M1200
M1210
DRIVE
SIZE
M1170
M1180
M1190
M1200
M1210
Ratios
6.30 - 16.0
18.0 - 28.0
6.30 - 16.0
18.0 - 28.0
6.30 - 16.0
18.0 - 28.0
5.00 - 12.5
14.0 - 22.4
5.60 - 14.0
16.0 - 25.0
4.92
3.94
16.93 22.44 18.31
0.83
5.12
18.50 25.98 19.96
Ratios
6.30 - 16.0
18.0 - 28.0
6.30 - 16.0
18.0 - 28.0
6.30 - 16.0
18.0 - 28.0
5.00 - 12.5
14.0 - 22.4
5.60 - 14.0
16.0 - 25.0
AA
6.10
4.92
6.10
6.30
6.10
6.30
AD
AE
AF
AG
AJ
AL
BB
CC
DD
EE
GA
GB
28.15 5.5118 12.95
3.94
19.09
3.94
11.81
1.38
24.80
1.18
5.51
13.78
5.91
12.60
6.30 40.94 16.14
0.79
32.87 6.4961 15.75
3.94
22.05
3.94
13.19
1.38
26.38
1.18
5.51
16.14
7.09
14.17
7.68 46.06 18.50
21.26 27.83 23.46
0.91
34.84 7.0866 17.32
4.13
24.80
4.33
14.76
1.65
29.53
1.18
5.91
18.31
7.09
17.13
8.86 51.97 20.08
25.20 30.98 29.57
0.87
38.27 7.8740 18.70
5.12
27.56
5.91
18.70
1.65
35.43
1.57
6.30
21.46
7.87
22.05 12.40 60.83 22.44
25.20 30.98 29.57
0.87
38.27 7.8740 18.70
5.12
28.54
5.91
17.72
1.65
35.43
1.57
6.30
21.46
7.87
22.05 11.42 60.83 22.44
PC
RA
7.09
14.33
13.15
13.90
9.29
1.97
3.54
1.18
8.27
15.55
16.30
10.43
1.97
3.74
1.18
8.46
17.52
16.34
17.32
11.34
3.35
4.33
1.18
9.65
18.70
19.69
12.48
3.35
4.33
1.38
9.65
18.70
19.69
12.48
3.35
4.33
1.38
High Speed Shaft

T
2.5591 m6
1.9685 k6
2.7559 m6
2.3622 m6
3.1496 m6
2.7559 m6
3.3465 m6
3.1496 m6
TA
2.72
2.11
2.93
2.52
3.35
2.93
3.54
3.35
3.3465 m6
3.1496 m6
3.54
3.35
TB
0.71
0.55
0.79
0.71
0.87
0.79
TC
4.92
3.94
TE
M20
M16
TF
1.65
1.42
4.92
M20
6.10
4.92
0.87
0.87
UA
UE
Approx
Wt
lb
0.94
5.7087 11.42
12.40
43.31
8.46
2132
1.65
1.10
6.6929 13.78
13.19
48.43
9.65
3086
M20
1.65
1.38
7.2835 14.57
14.76
54.33
10.43
3748
6.10
M20
1.65
1.38
8.2677 15.35
17.72
63.98
11.61
5311
6.10
M20
1.65
1.38
8.2677 15.35
17.72
63.98
11.61
5509
++ See footnotes on Page 86.

(161-110) 87
Type DHJ3 Triple Reduction with Hollow Low Speed Shaft

Shrink Disc Mounted
AF
AG
MINIMUM CLEARANCE
OF SHAFT GUARD
AD
PC
X
UE UA
AL
AJ
TA
TB
TE (TAPPED HOLE)
TF (DEPTH )
TC
A
USABLE
LENGTH
O
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
W
C
RA
CC
AE
CLEARANCE
AA
E
8-HOLES
U DIA . FOR
GRADE 5 BOLT
BOTH
ENDS
CC
Q
M
Q
M
BB
EE
GA
GB
DRIVE
SIZE Ratios
M1130 31.5 - 140.0
M1140 31.5 - 140.0
31.5 - 90.0
M1150
100.0 - 140.0
M1160 31.5 - 140.0
DRIVE
SIZE
Ratios
M1130 31.5 - 140.0

M1140 31.5 - 140.0
31.5 - 90.0
M1150
100.0 - 140.0
31.5 - 90.0
M1160
100.0 - 140.0
AA
2.20
2.20
2.95
2.68
2.76
AD
AE
AF
AG
AJ
BB
CC
DD
EE
GA
GB
9.84 16.57 12.09

12.44 18.82 13.54
0.79
0.75
21.14 3.3465 8.46

23.66 3.9370 10.24
AL
3.43
3.07
11.81
13.39
3.15
3.54
8.35
9.29
0.94
1.10
16.69
18.58
1.18
1.18
4.41
4.57
7.87
9.06
3.94
4.72
7.87
9.06
3.94
4.72
26.14 11.42
29.61 13.39
12.99 20.39 15.00
0.83
25.63 4.3307 10.98
3.94
15.16
3.94
10.43
1.10
20.87
1.18
4.76
10.63
5.91
9.96
5.67
33.66 14.57
14.57 22.20 15.67
0.75
27.83 5.1181 13.78
3.74
16.93
3.94
11.02
1.10
22.05
1.18
4.92
11.71
6.50
10.93
6.10
36.61 15.94
PC
RA
4.92
5.91
8.86
9.81
11.32
11.06
10.39
11.69
6.89
7.83
1.57
1.97
3.23
3.43
0.98
1.18
12.99
8.50
1.97
3.41
1.18
13.78
9.13
1.97
3.35
1.18
6.50
6.99
11.89
0.9449 j6
0.9843 j6
1.1811 j6
0.9843 j6
1.3780 k6
1.1811 j6
TA
1.06
1.10
1.30
1.10
1.50
1.30
TB
0.31
0.31
0.31
0.39
0.31
TC
1.97
1.97
2.91
2.64
2.76
TE
M8
M10
TF
0.75
0.87
0.57
0.73
3.5433
4.1339
7.48
9.25
8.35
9.29
28.50
31.97
Approx
Wt
lb
6.10
719
7.09 1038
M10
0.87
0.73
4.5276
9.37
10.43
36.02
7.68
1268
M12
M10
1.10
0.87
0.94
5.3150 10.24
11.02
38.98
8.37
1510
High Speed Shaft

T
UA
UE
zz J7 tolerance.
H7 tolerance.
88 (161-110)
Type DHJ3 Triple Reduction with Hollow Low Speed Shaft

Shrink Disc Mounted
AF
AG
MINIMUM CLEARANCE
OF SHAFT GUARD
AD
PC
X
UE UA
AL
AJ
TA
TB
TE (TAPPED HOLE)
TF (DEPTH )
TC
A
USABLE
LENGTH
O
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
W
C
RA
CC
AE
CLEARANCE
AA
E
8-HOLES
U DIA . FOR
GRADE 5 BOLT
BOTH
ENDS
CC
Q
M
Q
M
BB
EE
GA
GB
DRIVE
SIZE Ratios
M1170 31.5 - 140.0
M1180 31.5 - 140.0
M1190 31.5 - 140.0
M1200 25.0 - 112.0
M1210 28.0 - 125.0
DRIVE
SIZE
Ratios
M1170 31.5 - 140.0

M1180 31.5 - 140.0
31.5 - 90.0
M1190
100.0 - 140.0
M1200 25.0 - 112.0
M1210 28.0 - 125.0
A
3.94
3.94
3.94
5.12
5.12
AA
AD
AE
AF
AG
AJ
AL
BB
CC
DD
EE
GA
GB
16.93 22.44 18.31

18.50 25.98 19.96
0.83
0.79
28.15 5.5118 12.95

32.87 6.4961 15.75
3.94
3.94
19.09
22.05
3.94
3.94
11.81
13.19
1.38
1.38
24.80
26.38
1.18
1.18
5.51
5.51
13.78
16.14
5.91
7.09
12.60
14.17
21.26 27.83 23.46

25.20 30.98 29.57
25.20 30.98 29.57
0.91
0.87
0.87
34.84 7.0866 17.32

38.27 7.8740 18.70
38.27 7.8740 18.70
4.13
5.12
5.12
24.80
27.56
28.54
4.33
5.91
5.91
14.76
18.70
17.72
1.65
1.65
1.65
29.53
35.43
35.43
1.18
1.57
1.57
5.91
6.30
6.30
18.31
21.46
21.46
7.09
7.87
7.87
17.13 8.86 51.97 20.08

22.05 12.40 60.83 22.44
22.05 11.42 60.83 22.44
PC
RA
7.09
8.27
13.15
14.37
13.90
16.30
9.29
10.43
1.97
1.97
3.54
3.74
1.18
1.18
8.46
15.22
17.32
11.34
3.35
4.33
1.18
9.65
9.65
17.52
17.52
19.69
19.69
12.48
12.48
3.35
3.35
4.33
4.33
1.38
1.38
High Speed Shaft

T
1.5748 k6
1.7717 k6
2.1654 m6
1.6535 k6
2.5591 m6
2.5591 m6
TA
1.69
1.91
2.32
1.77
2.72
2.72
TB
0.47
0.55
0.63
0.47
0.71
0.71
TC
3.94
3.94
3.94
4.92
4.92
TE
M16
M16
M20
M16
M20
M20
TF
1.42
1.42
1.65
1.42
1.65
1.65
UA
UE
6.30 40.94 16.14

7.68 46.06 18.50
Approx
Wt
lb
8.46 2132
9.65 3131
X
0.94
1.10
5.7087 11.42
6.6929 13.78
12.40
13.19
43.31
48.43
1.38
7.2835 14.57
14.76
54.33
10.43
3858
1.38
1.38
8.2677 15.35
8.2677 15.35
17.72
17.72
63.98
63.98
11.61
11.61
5364
5584
zz J7 tolerance.
H7 tolerance.
(161-110) 89
Type DHQ2 Double Reduction with Hollow Low Speed Shaft

PC
X
AF
Refer to Page 172 for standard hollow shaft bores.
UE UA
TA
TB
TE (TAPPED HOLE)
TF (DEPTH )
TC
A
USABLE
LENGTH
O
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
W
C
RA
CC
AA
BOTH
ENDS
CC
Q
M
Q
M
EE
E
8-HOLES
U DIA . FOR
GRADE 5 BOLT
BB
GA
GB
DRIVE
SIZE
M1130
M1140
M1150
M1160
DRIVE
SIZE
M1130
M1140
M1150
M1160
Ratios
6.30 - 16.0
18.0 - 28.0
6.30 - 16.0
18.0 - 28.0
6.30 - 16.0
18.0 - 28.0
6.30 - 16.0
18.0 - 28.0
3.94
2.20
3.94
2.76
3.94
3.35
3.94
Ratios
6.30 - 16.0
18.0 - 28.0
6.30 - 16.0
18.0 - 28.0
6.30 - 16.0
18.0 - 28.0
6.30 - 16.0
18.0 - 28.0
M
4.92
5.91
6.50
6.99
AA
AF
BB
CC
DD
EE
GA
GB
9.84
0.81
3.43
11.81
3.15
8.35
0.94
16.69
1.18
4.41
7.87
3.94
7.87
3.94
26.14
11.42
12.44
0.75
3.07
13.39
3.54
9.29
1.10
18.58
1.18
4.57
9.06
4.72
9.06
4.72
29.61
13.39
12.99
0.87
3.94
15.16
3.94
10.43
1.10
20.87
1.18
4.76
10.63
5.91
9.96
5.67
33.66
14.57
14.57
0.80
3.74
16.93
3.94
11.02
1.10
22.05
1.18
4.92
11.71
6.50
10.93
6.10
36.61
15.94
O
10.83
8.86
11.79
10.62
12.52
11.73
13.07
PC
RA
6.91
1.57
3.23
0.98
7.83
1.97
3.43
1.18
7.68
1.97
3.41
1.18
9.17
1.97
3.35
1.18
High Speed Shaft

T
1.5748 k6
1.1024 j6
1.6535 k6
1.258k6
1.9685 k6
1.3780 k6
2.1654 m6
1.6535 k6
TA
1.69
1.22
1.77
1.37
2.11
1.50
2.32
1.77
TB
0.47
0.31
0.47
0.39
0.55
0.39
0.63
0.47
TC
3.94
1.97
3.94
2.76
3.94
3.15
3.94
TE
M16
M10
M16
M12
M16
M12
M20
M16
TF
1.42
0.87
1.42
1.10
1.42
1.10
1.65
1.42
UA
UE
Approx
Wt
lb
0.57
3.74
8.81
8.35
28.50
6.10
692
0.73
4.33
10.30
9.29
31.97
7.09
992
0.73
4.73
10.78
10.43
36.02
7.68
1226
0.94
5.32
11.56
11.02
38.98
8.37
1576
44 j6 tolerance for shaft diameters 1.2 and less, k6 tolerance for shaft diameters over 1.2 to 2.0, m6 tolerance for shaft diameters above 2.0
H7 tolerance.
90 (161-110)
Type DHQ2 Double Reduction with Hollow Low Speed Shaft

PC
X
AF
UE UA
TA
TB
TE (TAPPED HOLE)
TF (DEPTH )
TC
A
USABLE
LENGTH
O
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
W
C
RA
CC
AA
8-HOLES
U DIA . FOR
GRADE 5 BOLT
BOTH
ENDS
CC
Q
M
Q
M
EE
E
V
BB
GA
GB
DRIVE
SIZE
M1170
M1180
M1190
M1200
M1210
DRIVE
SIZE
M1170
M1180
M1190
M1200
M1210
Ratios
AA
AF
BB
CC
DD
EE
GA
GB
6.30 - 16.0
18.0 - 28.0
6.30 - 16.0
18.0 - 28.0
6.30 - 16.0
18.0 - 28.0
5.00 - 12.5
14.0 - 22.4
5.60 - 14.0
16.0 - 25.0
4.92
3.94
16.93
0.85
3.94
19.09
3.94
11.81
1.38
24.80
1.18
5.51
13.78
5.91
12.60
6.30
40.94
16.14
5.12
18.50
0.79
3.94
22.05
3.94
13.19
1.38
26.38
1.18
5.51
16.14
7.09
14.17
7.68
46.06
18.50
21.26
0.91
4.13
24.80
4.33
14.76
1.65
29.53
1.18
5.91
18.31
7.09
17.13
8.86
51.97
20.08
25.20
0.87
5.12
27.56
5.91
18.70
1.65
35.43
1.57
6.30
21.46
7.87
22.05
12.40
60.83
22.44
25.20
0.87
5.12
28.54
5.91
17.72
1.65
35.43
1.57
6.30
21.46
7.87
22.05
11.42
60.83
22.44
Ratios
6.30 - 16.0
18.0 - 28.0
6.30 - 16.0
18.0 - 28.0
6.30 - 16.0
18.0 - 28.0
5.00 - 12.5
14.0 - 22.4
5.60 - 14.0
16.0 - 25.0
6.10
4.92
6.10
6.30
6.10
6.30
PC
RA
7.09
14.33
13.15
9.31
1.97
3.54
1.18
8.27
15.55
10.43
1.97
3.74
1.18
8.46
17.52
16.34
11.34
3.35
4.33
1.18
9.65
18.70
12.48
3.35
4.33
1.38
9.65
18.70
12.48
3.35
4.33
1.38
High Speed Shaft

T
2.5591 m6
1.9685 k6
2.7559 m6
2.3622 m6
3.1496 m6
2.7559 m6
3.3465 m6
3.1496 m6
TA
2.72
2.11
2.93
2.52
3.35
2.93
3.54
3.35
3.3465 m6
3.1496 m6
3.54
3.35
UA
UE
Approx
Wt
lb
0.94
5.91
12.59
12.40
43.31
8.46
1938
TB
0.71
0.55
0.79
0.71
0.87
0.79
TC
4.92
3.94
TE
M20
M16
TF
1.65
1.42
4.92
M20
1.65
1.10
6.69
15.04
13.19
48.43
9.65
2687
6.10
4.92
M20
1.65
1.38
7.28
15.90
14.76
54.33
10.43
3713
0.87
6.10
M20
1.65
1.38
8.66
16.69
17.72
63.98
11.61
5176
0.87
6.10
M20
1.65
1.38
8.66
16.69
17.72
63.98
11.61
5379
++ See footnotes on Page 90

(161-110) 91
Type DHQ3 Triple Reduction with Hollow Low Speed Shaft

PC
X
AF
UE UA
TA
TB
TE (TAPPED HOLE)
TF (DEPTH )
TC
A
USABLE
LENGTH
O
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
W
C
RA
CC
AA
E
8-HOLES
U DIA . FOR
GRADE 5 BOLT
BOTH
ENDS
CC
Q
M
Q
M
EE
BB
GA
GB
DRIVE
SIZE
Ratios
AA
AF
BB
CC
DD
EE
GA
GB
M1130
M1140
2.20
2.20
2.95
2.68
2.76
9.84
12.44
0.81
0.75
3.43
3.07
11.81
13.39
3.15
3.54
8.35
9.29
0.94
1.10
16.69
18.58
1.18
1.18
4.41
4.57
7.87
9.06
3.94
4.72
7.87
9.06
3.94
4.72
26.14
29.61
11.42
13.39
12.99
0.87
3.94
15.16
3.94
10.43
1.10
20.87
1.18
4.76
10.63
5.91
9.96
5.67
33.66
14.57
M1160
31.5-140.0
31.5-140.0
31.5-90.0
100.0-140.0
31.5-140.0
14.57
0.80
3.74
16.93
3.94
11.02
1.10
22.05
1.18
4.92
11.71
6.50
10.93
6.10
36.61
15.94
DRIVE
SIZE
Ratios
PC
RA
M1130
M1140
31.5-140.0
31.5-140.0
31.5-90.0
100.0-140.0
31.5-90.0
100.0-140.0
4.92
5.91
8.86
9.81
11.32
11.06
6.91
7.83
1.57
1.97
3.23
3.43
0.98
1.18
7.68
1.97
3.41
1.18
11.89
9.17
1.97
3.35
1.18
M1150
M1150
M1160
6.50
6.99
TE
M8
M10
TF
0.75
0.87
0.57
0.73
3.74
4.33
8.81
10.30
8.35
9.29
28.50
31.97
Approx
Wt
lb
6.10
699
7.09 1001
M10
0.87
0.73
4.73
10.78
10.43
36.02
7.68
1243
M12
M10
1.10
0.87
0.94
5.32
11.56
11.02
38.98
8.37
1603
High Speed Shaft

T
0.9449 j6
0.9843 j6
1.1811 j6
0.9843 j6
1.3780 k6
1.1811 j6
TA
1.06
1.10
1.30
1.14
1.50
1.30
TB
0.31
0.31
0.31
0.39
0.31
TC
1.97
1.97
2.91
2.64
2.76
UA
UE
44 j6 tolerance for shaft diameters 1.2 and less, k6 tolerance for shaft diameters over 1.2 to 2.0, m6 tolerance for shaft diameters above 2.0
H7 tolerance.
92 (161-110)
Type DHQ3 Triple Reduction with Hollow Low Speed Shaft

PC
X
AF
UE UA
TA
TB
TE (TAPPED HOLE)
TF (DEPTH )
TC
A
USABLE
LENGTH
O
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
W
C
RA
CC
AA
8-HOLES
U DIA . FOR
GRADE 5 BOLT
BOTH
ENDS
CC
Q
M
Q
M
EE
E
V
BB
GA
GB
DRIVE
SIZE
M1170
M1180
Ratios
AA
AF
BB
CC
DD
EE
GA
GB
3.94
3.94
3.94
5.12
5.12
16.93
0.85
3.94
19.09
3.94
11.81
1.10
24.80
1.18
5.51
13.78
5.91
12.60
18.50
0.79
3.94
22.05
3.94
13.19
1.38
26.38
1.18
5.51
16.14
7.09
14.17
M1190
M1200
M1210
31.5 - 140.0
31.5 - 140.0
31.5 - 140.0
25.0 - 112.0
28.0 - 125.0
21.26
25.20
25.20
0.91
0.87
0.87
4.13
5.12
5.12
24.80
27.56
28.54
4.33
5.91
5.91
14.76
18.70
17.72
1.38
1.65
1.65
29.53
35.43
35.43
1.18
1.57
1.57
5.91
6.30
6.30
18.31
21.46
21.46
7.09
7.87
7.87
17.13
22.05
22.05
DRIVE
SIZE
Ratios
M1170
M1180
31.5 - 140.0
31.5 - 140.0
31.5 - 90.0
M1190
100.0 - 140.0
M1200 25.0 - 112.0
M1210 28.0 - 125.0
PC
RA
7.09
8.27
13.15
14.37
9.31
10.43
1.97
1.97
3.54
3.74
1.18
1.18
8.46
15.22
11.34
3.35
4.33
1.18
9.65
9.65
17.52
17.52
12.48
12.48
3.35
3.35
4.33
4.33
1.38
1.38
High Speed Shaft

T
1.5748 k6
1.7717 k6
2.1654 m6
1.6535 k6
2.5591 m6
2.5591 m6
TA
1.69
1.91
2.32
1.77
2.72
2.72
TB
0.47
0.55
0.63
0.47
0.71
0.71
TC
3.94
3.94
3.94
4.92
4.92
TE
M16
M16
M20
M16
M20
M20
TF
1.42
1.42
1.65
1.42
1.65
1.65
6.30
40.94
16.14
7.68
46.06
18.50
8.86
12.40
11.42
51.97
60.83
60.83
20.08
22.44
22.44
UA
UE
0.94
1.10
5.91
6.69
12.59
15.04
12.40
13.19
43.31
48.43
8.46
9.65
Approx
Wt
lb
1980
2749
1.38
7.28
15.90
14.76
54.33
10.43
3856
1.38
1.38
8.66
8.66
16.69
16.69
17.72
17.72
63.98
63.98
11.61
11.61
5289
5492
H7 tolerance.
(161-110) 93
Type DVA2 Double Reduction with Lube Pump & Drywell

UB - DIA UNC TAP

UC - DEEP
UD - DIA BOLT CIRCLE
W
C
RA
SB
HB
SB
AB
E AA
SA
SIZES M1150-M1160
AB
SA
SIZE M1170
T
TB
HD
TA
HC
TE (TAPPED HOLE)
TF (DEPTH )
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
H
HA
A
USABLE
LENGTH
TC
AE
CLEARANCE
O
L
K
SE
EE
CC
SG
EE
B
USABLE
LENGTH
AC
BA
CC
SC
SF
DRIVE
SIZE
Ratios
AA
AB
AC
AE
BA
CC
DD
EE
HA
HB
HC
HD
RA
6.30-16.0 3.94
33.78
12.52
16.14 8.07
25.79 9.45 13.58 15.16 3.94 10.43 1.38 20.87 0.79 32.48 14.90 2.17 7.79 3.42 3.54 8.66 2.36 15.35
3.41 1.18
18.0-28.0 3.35
32.99
11.73
M1160 6.30-28.0 3.94 17.32 8.66 35.33 28.03 9.45 13.90 16.93 3.94 11.02 1.38 22.05 0.79 35.43 15.53 1.97 7.79 3.45 3.54 9.25 2.36 16.73 13.07 3.35 1.18
6.30-16.0 4.92
38.07
14.33
20.08 10.04
28.50 11.02 15.28 19.09 3.94 11.81 1.38 24.80 0.79 39.76 16.91 1.97 7.79 3.46 3.54 10.04 2.36 16.93
3.54 1.18
M1170
18.0-28.0 3.94
36.89
13.15
M1150
DRIVE
SIZE
M1150
M1160
M1170
Ratios
Low Speed Shaft

S
SA
6.30-16.0
6.2992 m6 6.65
18.0-28.0
6.30-16.0
6.6929 m6 7.05
18.0-28.0
6.30-16.0
7.4803 m6 7.87
18.0-28.0
High Speed Shaft

SF
SB
SC
SE
.002
SG
1.57
7.87
1.81
12.992
3.94
1.57
7.87
1.81
14.173
4.33
1.77
8.66
1.85
15.354
3.98
TA
TB
TC
TE
TF
1.9685 k6
1.3780 k6
2.1654 m6
1.6535 k6
2.5591 m6
1.9685 k6
2.11
1.50
2.32
1.77
2.72
2.11
0.55
0.39
0.63
0.47
0.71
0.55
3.94
3.15
M16
M12
M20
M16
M20
M16
1.42
1.10
1.65
1.42
1.65
1.42
3.94
4.92
3.94
UB
UC
UD
Approx
Wt
lb
M20
0.98
4.528
7.68
36.02
1464
M24
1.50
4.528
8.37
38.98
1695
M30
1.57
5.118
8.46
43.31
2207
++ Drawings are representative of this series of drives and do not agree in exact detail for all sizes. Gear drives are for horizontal floor mounted operation unless specifically
stated otherwise. Consult the Factory for other mountings. Dimensions are for reference only and are subject to change without notice unless certified.
94 (161-110)
Type DVA2 Double Reduction with Lube Pump & Drywell

UB - D IA. UNC TAP

UC - DEEP
UD - DIA . BOLT CIRCLE
W
C
RA
SB
HB
S
R
AB
E AA
SA
AB
T
TB
HD
TA
HC
TE (TAPPED HOLE)
TF (DEPTH )
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
A
USABLE
LENGTH
TC
HA
AE
CLEARANCE
O
L
K
SE
EE
CC
SG
B
USABLE
LENGTH
AC
EE
BA
CC
SC
SF
DRIVE
SIZE Ratios
M1180 6.30-28.0
6.30-16.0
M1190
18.0-28.0
5.00-12.5
M1200
14.0-22.4
5.60-14.0
M1210
16.0-25.0
DRIVE
SIZE
M1180
M1190
M1200
M1210
Ratios
6.30-16.0
18.0-28.0
6.30-16.0
18.0-28.0
5.00-12.5
14.0-22.4
5.60-14.0
16.0-25.0
AA
5.12
6.10
4.92
6.10
6.30
6.10
6.30
AB
AC
AE
BA
CC
DD
EE
HA
HB
HC
HD
RA
21.65 10.83 42.09 32.56 11.02 16.89 22.05 3.94 13.19 1.38 26.38 0.79 44.88 17.65 1.97 7.79 3.41 3.54 11.42 2.36 19.29 15.55 3.74 1.18
44.92
17.52
24.80 12.40
35.20 11.02 16.97 24.80 4.33 14.76 1.65 29.53 0.79 50.39 19.62 1.38 7.79 3.80 3.54 12.80 3.74 20.87
4.33 1.18
43.74
16.34
31.50 15.75 48.98 39.09 12.99 18.66 27.56 4.33 18.70 1.65 35.43 0.79 60.04 22.06 0.91 7.39 3.29 3.54 16.73 3.74 23.23 18.70 4.33 1.38
31.50 15.75 48.98 39.09 12.99 18.66 28.54 4.33 17.72 1.65 35.43 0.79 60.04 22.06 0.91 7.39 3.29 3.54 15.75 3.74 23.23 18.70 4.33 1.38
Low Speed Shaft

S
SA
SB
SC
High Speed Shaft

SE
SF
.002
SG
7.8740 m6
8.27
1.77
8.66
1.81
17.717
5.31
8.6614 m6
9.09
1.97
8.66
1.91
19.685
5.41
10.2362 m6
10.71
2.20
11.02
2.13
20.472
5.08
10.2362 m6
10.71
2.20
11.02
2.13
20.472
5.08
TA
TB
2.7559 m6
2.3622 m6
3.1496 m6
2.7559 m6
3.3465 m6
3.1496 m6
3.3465 m6
3.1496 m6
2.93
2.52
3.35
2.93
3.54
3.35
3.54
3.35
0.79
0.71
0.87
0.79
UB
UC
UD
Approx
Wt
lb
TC
TE
TF
4.92
M20
1.65
M30
1.57
5.512
9.65 48.43
3161
6.10
4.92
M20
1.65
M30
1.57
6.299
10.43 54.33
3823
0.87
6.10
M20
1.65
M36
1.97
6.639
11.61 63.98
6371
0.87
6.10
M20
1.65
M36
1.97
6.693
11.61 63.98
6570
(161-110) 95
Type DVA3 Triple Reduction with Lube Pump & Drywell

UB - DIA UNC TAP

UC - DEEP
W
C
RA
SB
HB
SB
AB
E AA
SA
SIZES M1150-M1160
AB
SA
SIZE M1170
T
TB
HD
G
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
TA
HC
TE (TAPPED HOLE)
TF (DEPTH )
H
HA
A
USABLE
LENGTH
TC
AE
CLEARANCE
O
L
K
SE
EE
CC
SG
EE
B
USABLE
LENGTH
AC
BA
CC
SC
SF
DRIVE
SIZE
Ratios
31.5-90.0
100.0-140.0
M1160 31.5-140.0
M1170 31.5-140.0
M1150
DRIVE
SIZE
M1150
M1160
M1170
Ratios
AA
AB
AC
AE
BA
CC
DD
EE
HA
HB
HC
HD
RA
2.95
32.58
11.32
16.14 8.07
25.79 9.45 13.58 15.16 3.94 10.43 1.38 20.87 0.79 32.48 14.90 2.17 7.79 3.42 3.54 8.66 2.36 15.35
3.41 1.18
2.68
32.32
11.06
2.76 17.32 8.66 34.15 28.03 9.45 13.90 16.93 3.94 11.02 1.38 22.05 0.79 35.43 15.53 1.97 7.79 3.45 3.54 9.25 2.36 16.73 11.89 3.35 1.18
3.94 20.08 10.04 36.89 28.50 11.02 15.28 19.09 3.94 11.81 1.38 24.80 0.79 39.76 16.91 1.97 7.79 3.46 3.54 10.04 2.36 16.93 13.15 3.54 1.18
Low Speed Shaft

S
31.5-90.0
6.2992 m6
100.0-140.0
31.5-90.0
6.6929 m6
100.0-140.0
31.5-140.0 7.4803 m6
High Speed Shaft
SA
SB
SC
SE
SF
.002
SG
6.65
1.57
7.87
1.81
12.992
3.94
7.05
1.57
7.87
1.81
14.173
4.33
7.87
1.77
8.66
1.85
15.354
3.98
TA
1.1811 j6
0.9843 j6
1.3780 k6
1.1811 j6
1.5748 k6
1.30
1.10
1.50
1.30
1.69
TB
TC
TE
TF
0.31
2.91
2.64
M10
0.87
M12
M10
M16
1.10
0.87
1.42
0.39
0.31
0.47
2.76
3.94
UB
UC
UD
Approx
Wt
lb
M20
0.98
4.528
7.68
36.02
1475
M24
1.50
4.528
8.37
38.98
1761
M30
1.57
5.118
8.46
43.31
2207
96 (161-110)
Type DVA3 Triple Reduction with Lube Pump & Drywell

UB - D IA. UNC TAP

UC - DEEP
UD - DIA . BOLT CIRCLE
W
C
RA
SB
HB
S
R
AB
E AA
SA
AB
T
TB
HD
TA
HC
TE (TAPPED HOLE)
TF (DEPTH )
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
A
USABLE
LENGTH
TC
HA
AE
CLEARANCE
O
L
K
SE
EE
CC
SG
B
USABLE
LENGTH
AC
EE
BA
CC
SC
SF
DRIVE
SIZE
M1180
M1190
M1200
M1210
Ratios
AA
AB
AC
AE
BA
CC
DD
EE
HA
HB
HC
HD
RA
31.5-140.0
31.5-140.0
25.0-112.0
28.0-125.0
3.94
3.94
5.12
5.12
21.65
24.80
31.50
31.50
10.83
12.40
15.75
15.75
40.91
42.62
47.80
47.80
32.56
35.20
39.09
39.09
11.02
11.02
12.99
12.99
16.89
16.97
18.66
18.66
22.05
24.80
27.56
28.54
3.94
4.33
4.33
4.33
13.19
14.76
18.70
17.72
1.38
1.65
1.65
1.65
26.38
29.53
35.43
35.43
0.79
0.79
0.79
0.79
44.88
50.39
60.04
60.04
17.65
19.62
22.06
22.06
1.97
1.38
0.91
0.91
7.79
7.79
7.39
7.39
3.41
3.80
3.29
3.29
3.54
3.54
3.54
3.54
11.42
12.80
16.73
15.75
2.36
3.74
3.74
3.74
19.29
20.87
23.23
23.23
14.37
15.22
17.52
17.52
3.74
4.33
4.33
4.33
1.18
1.18
1.38
1.38
DRIVE
SIZE
Ratios
M1180
M1190
M1200
M1210
Low Speed Shaft

S
31.5-140.0 7.8740 m6
31.5-90.0
8.6614 m6
100.0-140.0
25.0-112.0 10.2362 m6
28.0-125.0 10.2362 m6
High Speed Shaft
SA
SB
SC
SE
SF
.002
SG
TA
TB
TC
TE
TF
8.27
1.77
8.66
1.81
17.717
5.31
1.97
8.66
1.91
19.685
5.41
10.71
10.71
2.20
2.20
11.02
11.02
2.13
2.13
20.472
20.472
5.08
5.08
1.91
2.32
1.77
2.72
2.72
0.55
0.63
0.47
0.71
0.71
3.94
9.09
1.7717 k6
2.1654 m6
1.6535 k6
2.5591 m6
2.5591 m6
M16
M20
M16
M20
M20
1.42
1.65
1.42
1.65
1.65
3.94
4.92
4.92
Approx
Wt
lb
UB
UC
UD
M30
1.57
5.512
9.65 48.43
3206
M30
1.57
6.299
10.43 54.33
3933
M36
M36
1.97
1.97
6.693
6.693
11.61 63.98
11.61 63.98
6471
6669
(161-110) 97
Type DVC2 Double Reduction with Lube Pump

W
C
RA
SB
SE (TAPPED HOLE)
SF (DEPTH)
HB
R
AB
SA
E AA
AB
T
TB
TA
HD
G
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
TE (TAPPED HOLE)
TF (DEPTH )
HC
H
HA
A
USABLE
LENGTH
TC
AE
CLEARANCE
O
L
K
V
EE
CC
B
USABLE
LENGTH
DRIVE
SIZE
Ratios
6.30-16.0
18.0-28.0
6.30-16.0
M1140
18.0-28.0
6.30-16.0
M1150
18.0-28.0
M1160 6.30-28.0
M1130
DRIVE
SIZE
M1130
M1140
M1150
M1160
A
3.94
2.20
3.94
2.76
3.94
3.35
3.94
Ratios
6.30-16.0
18.0-28.0
6.30-16.0
18.0-28.0
6.30-16.0
18.0-28.0
6.30-16.0
18.0-28.0
AA
AB
AC
22.44
20.47
25.77
15.04 7.52
24.60
27.20
16.14 8.07
26.42
17.32 8.66 29.69
12.99 6.50
AE
BA
CC
DD
EE
HB
HC
HD
BA
10.83
8.86
11.79
23.07 6.10 6.89 13.39 3.94 9.29 1.10 18.58 0.79 28.58 14.09 2.17 7.79 2.87 3.54 7.60 2.36 14.17
10.62
12.52
25.79 6.10 7.01 15.16 3.94 10.43 1.38 20.87 0.79 32.48 14.90 2.17 7.79 3.42 3.54 8.66 2.36 15.35
11.73
28.03 7.48 8.25 16.93 3.94 11.02 1.38 22.05 0.79 35.43 15.53 1.97 7.79 3.45 3.54 9.25 2.36 16.73 13.07
18.15 4.72 5.51 11.81 3.15
8.35 1.10 16.69 0.79 25.35 13.11 2.17 7.79 2.83 3.54 6.77 1.97 12.20
Low Speed Shaft

S
EE
CC
SC
HA
AC
SA
High Speed Shaft
SB
SC
SE
SF
3.5433 m6
3.74
0.98
4.33
M24
1.97
4.3307 m6
4.57
1.10
5.51
M24
1.97
4.7244 m6
5.00
1.26
5.51
M24
1.97
5.1181 m6
5.39
1.26
7.09
M24
1.97
TA
TB
TC
TE
TF
1.5748 k6
1.1024 j6
1.6535 k6
1.2598 k6
1.9685 k6
1.3780 k6
2.1654 m6
1.6535 k6
1.69
1.22
1.77
1.37
2.11
1.50
2.32
1.77
0.47
0.31
0.47
0.39
0.55
0.39
0.63
0.47
3.94
1.97
3.94
2.76
3.94
3.15
M16
M10
M16
M12
M16
M12
M20
M16
1.42
0.87
1.42
1.10
1.42
1.10
1.65
1.42
3.94
RA
3.23 0.98
3.43 1.18
3.41 1.18
3.35 1.18
Approx
Wt
lb
6.10
28.50
842
7.09
31.97
1184
7.68
36.02
1464
8.37
38.98
1695
98 (161-110)
Type DVC2 Double Reduction with Lube Pump

W
C
RA
SB
SE (TAPPED HOLE)
SF (DEPTH)
HB
R
AB
SA
E AA
AB
T
TB
TA
HD
G
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
TE (TAPPED HOLE)
TF (DEPTH )
HC
H
HA
A
USABLE
LENGTH
TC
AE
CLEARANCE
O
L
K
V
EE
CC
B
USABLE
LENGTH
DRIVE
SIZE
M1170
M1180
M1190
M1200
M1210
DRIVE
SIZE
M1170
M1180
M1190
M1200
M1210
Ratios
6.30-16.0
18.0-28.0
6.30-28.0
6.30-16.0
18.0-28.0
5.00-12.5
14.0-22.4
5.60-14.0
16.0-25.0
4.92
3.94
5.12
6.10
4.92
6.10
6.30
6.10
6.30
Ratios
6.30-16.0
18.0-28.0
6.30-16.0
18.0-28.0
6.30-16.0
18.0-28.0
5.00-12.5
14.0-22.4
5.6-14.0
16.0-25.0
AA
AB
AC
AE
31.26
20.08 10.04
28.50
30.08
21.65 10.83 33.46 32.56
37.80
24.80 12.40
35.20
36.61
BA
CC
DD
EE
EE
CC
SC
HA
AC
HB
HC
HD
BA
RA
14.33
7.48 8.46 19.09 3.94 11.81 1.38 24.80 0.79 39.76 16.91 1.97 7.79 3.46 3.54 10.04 2.36 16.93
3.54 1.18
13.15
7.48 8.27 22.05 3.94 13.19 1.38 26.38 0.79 44.88 17.65 1.97 7.79 3.41 3.54 11.42 2.36 19.29 15.55 3.74 1.18
17.52
8.86 9.84 24.80 4.33 14.76 1.65 29.53 0.79 50.39 19.62 1.38 7.79 3.80 3.54 12.80 3.74 20.87
4.33 1.18
16.34
31.50 15.75 41.73 39.09 10.63 11.42 27.56 4.33 18.70 1.65 35.43 0.79 60.04 22.06 0.91 7.39 3.29 3.54 16.73 3.74 23.23 18.70 4.33 1.38
31.50 15.75 41.73 39.09 10.63 11.42 28.55 4.33 17.72 1.65 35.43 0.79 60.04 22.06 0.91 7.39 3.29 3.54 15.75 3.74 23.23 18.70 4.33 1.38
Low Speed Shaft

S
SA
High Speed Shaft
SB
SC
SE
SF
5.1181 m6
5.39
1.26
7.09
M24
1.97
5.9055 m6
6.22
1.42
7.09
M24
1.97
6.6929 m6
7.05
1.57
7.87
M24
1.97
7.4803 m6
7.87
1.77
9.84
M24
1.97
7.8740 m6
8.27
1.77
9.84
M24
1.97
Approx
Wt
lb
1.65
1.42
8.46
43.31
2207
M20
1.65
9.65
48.43
3161
6.10
4.92
M20
1.65
10.43
54.33
3823
0.87
6.10
M20
1.65
11.61
63.98
6371
0.87
6.10
M20
1.65
11.61
63.98
6570
TA
TB
TC
TE
TF
2.5591 m6
1.9685 k6
2.7559 m6
2.3622 m6
3.1496 m6
2.7559 m6
3.3465 m6
3.1496 m6
3.3465 m6
3.1496 m6
2.72
2.11
2.93
2.52
3.35
2.93
3.54
3.35
3.54
3.35
0.71
0.55
0.79
0.71
0.87
0.79
4.92
3.94
M20
M16
4.92
(161-110) 99
Type DVC3 Triple Reduction with Lube Pump

W
C
RA
SB
SE (TAPPED HOLE)
SF (DEPTH)
HB
R
AB
SA
E AA
AB
T
TB
TA
HD
G
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
TE (TAPPED HOLE)
TF (DEPTH )
HC
H
HA
A
USABLE
LENGTH
TC
AE
CLEARANCE
O
L
K
V
EE
CC
B
USABLE
LENGTH
DRIVE
A
SIZE Ratios
M1130 31.5-140.0 2.20
M1140 31.5-140.0 2.20
31.5-90.0 2.95
M1150
100.0-140.0 2.68
M1160 31.5-140.0 2.76
DRIVE
SIZE
Ratios
M1130
M1140
31.5-140.0
31.5-140.0
31.5-90.0
100.0-140.0
31.5-90.0
100.0-140.0
M1150
M1160
AA
AB
AC
12.99 6.50 20.47

15.04 7.52 23.79
26.00
16.14 8.07
25.75
17.32 8.66 28.50
AE
18.15
23.07
25.79
28.03
BA
CC
DD
EE
SA
HB
HC
HD
BA
RA
4.72 5.51 11.81 3.15 8.35 1.10 16.69 0.79 25.35 13.11 2.17 7.79 2.83 3.54 6.77 1.97 12.20 8.86 3.23
6.10 6.89 13.39 3.94 9.29 1.10 18.58 0.79 28.58 14.09 2.17 7.79 2.87 3.54 7.60 2.36 14.17 9.82 3.43
11.32
6.10 7.01 15.16 3.94 10.43 1.38 20.87 0.79 32.48 14.90 2.17 7.79 3.42 3.54 8.66 2.36 15.35
3.41
11.06
7.48 8.25 16.93 3.94 11.02 1.38 22.05 0.79 35.43 15.53 1.97 7.79 3.45 3.54 9.25 2.36 16.73 11.89 3.35
Low Speed Shaft

S
EE
CC
SC
HA
AC
High Speed Shaft
SB
SC
SE
SF
3.5433 m6
4.3307 m6
4.7244 m6
4.7244 m6
3.74
4.57
0.98
1.10
4.33
5.51
M24
M24
1.97
1.97
5.00
1.26
5.51
M24
1.97
5.1181 m6
5.39
1.26
7.09
M24
1.97
0.9449 j6
0.9843 j6
1.1811 j6
0.9843 j6
1.3780 k6
1.1811 j6
Approx
Wt
lb
0.75
0.87
6.10
7.09
28.50
31.97
847
1197
M10
0.87
7.68
36.02
1475
M12
M10
1.10
0.87
s8.37
38.98
1761
TB
TC
TE
TF
0.31
0.31
1.97
1.97
2.91
2.64
M8
M10
2.76
1.18
TA
0.39
0.31
1.18
1.06
1.10
1.30
1.10
1.50
1.30
0.31
0.98
1.18
100 (161-110)
Type DVC3 Triple Reduction with Lube Pump

W
C
RA
SB
SE (TAPPED HOLE)
SF (DEPTH)
HB
R
AB
SA
E AA
AB
T
TB
TA
HD
G
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
TE (TAPPED HOLE)
TF (DEPTH )
HC
H
HA
A
USABLE
LENGTH
TC
AE
CLEARANCE
O
L
K
V
EE
CC
B
USABLE
LENGTH
DRIVE
SIZE
M1170
M1180
M1190
M1200
M1210
Ratios
AA
AB
AC
31.5-140.0
31.5-140.0
31.5-140.0
25.0-112.0
28.0-125.0
3.94
3.94
3.94
5.12
5.12
20.08
21.65
24.80
31.50
31.50
10.04
10.83
12.40
15.75
15.75
30.08
32.28
35.49
40.55
40.55
DRIVE
SIZE
Ratios
M1170
M1180
31.5-140.0
31.5-140.0
31.5-90.0
100.0-140.0
25.0-112.0
28.0-125.0
M1190
M1200
M1210
AE
BA
28.50 7.48 8.46

32.56 7.48 8.27
35.20 8.86 9.84
39.09 10.63 11.42
39.09 10.63 11.42
SA
EE
CC
SC
CC
DD
EE
HA
HB
HC
19.10
22.05
24.81
27.56
28.55
3.94
3.94
4.33
5.91
5.91
11.81
13.19
14.76
18.70
17.72
1.38
1.38
1.65
1.65
1.65
24.80
26.38
29.53
35.43
35.43
0.79
0.79
0.79
0.79
0.79
39.76
44.88
50.39
60.04
60.04
16.91
17.65
19.62
22.06
22.06
1.97
1.97
1.38
0.91
0.91
7.79
7.79
7.79
7.39
7.39
3.46 3.54 10.04

3.41 3.54 11.42
3.80 3.54 12.80
3.29 3.54 16.73
3.29 3.54 15.75
Low Speed Shaft
AC
HD
RA
2.36
2.36
3.74
3.74
3.74
16.93
19.29
20.87
23.23
23.23
13.15
14.37
15.22
17.52
17.52
3.54
3.74
4.33
4.33
4.33
1.18
1.18
1.18
1.38
1.38
High Speed Shaft
SB
SC
SE
SF
TA
TB
TC
TE
TF
1.5748 k6
1.7717 k6
2.1654 m6
1.6535 k6
2.5591 m6
2.5591 m6
1.69
1.91
2.32
1.77
2.72
2.72
0.47
0.55
0.63
0.47
0.71
0.71
3.94
3.94
M16
M16
M20
M16
M20
M20
1.42
1.42
1.65
1.42
1.65
1.65
5.1181 m6
5.9055 m6
5.39
6.22
1.26
1.42
7.09
7.09
M24
M24
1.97
1.97
6.6929 m6
7.05
1.57
7.87
M24
1.97
7.4803 m6
7.8740 m6
7.87
8.27
1.77
1.77
9.84
9.84
M24
M24
1.97
1.97
3.94
4.92
4.92
BA
Approx
Wt
lb
8.46
9.65
43.31
48.43
2207
3206
10.43
54.33
3933
11.61
11.61
63.98
63.98
5851
6069
(161-110) 101
Type DVM2 Double Reduction with Lube Pump & Drywell

W
C
RA
HB
AB
TB
E AA
TA
AB
TE (TAPPED HOLE)
TF (DEPTH)
HD
Refer to Page 171 for hollow & driven shaft dimensions.
HC
4-HOLES
DD DIA. FOR
CLASS 8,8 BOLT
H
A
USABLE
LENGTH
TC
HA
AE
CLEARANCE
O
L
K
SH
DRIVE
SIZE
M1150
M1160
M1170
Ratios
6.30-16.0
18.0-28.0
6.30-28.0
6.30-16.0
18.0-28.0
DRIVE
SIZE
M1150
M1160
M1170
AA
AB
AC
AE
3.94
24.41
16.14 8.07
25.79
3.35
23.62
3.94 17.32 8.66 25.89 28.03
4.92
27.05
20.08 10.04
28.50
3.94
25.87
Ratios
6.30-16.0
18.0-28.0
6.30-16.0
18.0-28.0
6.30-16.0
18.0-28.0
BA
CC
EE
CC
SK
SJ
DD
EE
HB
HC
HD
4.21 15.16 3.94 10.43 1.38 20.87 0.79 32.48 14.90 2.17
7.79
3.42
3.54
4.45 16.93 3.94 11.02 1.38 22.05 0.79 35.43 15.53 1.97
7.79
3.45
4.25 19.09 3.94 11.81 1.38 24.80 0.79 39.76 16.91 1.97
7.79
3.46
.002
SK
1.81
12.992
3.94
1.81
14.173
4.33
1.85
15.354
3.98
BA
TA
TB
TC
TE
TF
1.9685 k6
1.3780 k6
2.1654 m6
1.6535 k6
2.5591 m6
1.9685 k6
2.11
1.50
2.32
1.77
2.72
2.11
0.55
0.39
0.63
0.47
0.71
0.55
3.94
3.15
M16
M12
M20
M16
M20
M16
1.42
1.10
1.65
1.42
1.65
1.42
4.92
3.94
RA
12.52
3.41
11.73
3.54 9.25 2.36 16.73 13.07 3.35
14.33
3.54 10.04 2.36 16.93
3.54
13.15
3.94
8.66 2.36 15.35
High Speed Shaft
Hollow Low Speed Shaft

SH
EE
CC
HA
SJ
AC
1.18
1.18
1.18
Approx
Wt
lb
7.68
36.02
1466
8.37
38.98
1695
8.46
43.31
2207
102 (161-110)
Type DVM2 Double Reduction with Lube Pump & Drywell

W
C
RA
HB
AB
TB
E AA
TA
AB
TE (TAPPED HOLE)
TF (DEPTH)
HD
HC
4-HOLES
DD DIA. FOR
CLASS 8,8 BOLT
H
HA
A
USABLE
LENGTH
TC
AE
CLEARANCE
O
L
K
SH
DRIVE
SIZE
M1180
M1190
M1200
M1210
DRIVE
SIZE
M1180
M1190
M1200
M1210
Ratios
6.30-28.0
6.30-16.0
18.0-28.0
5.00-12.5
14.0-22.4
5.60-14.0
16.0-25.0
5.12
6.10
4.92
6.10
6.30
6.10
6.30
Ratios
6.30-16.0
18.0-28.0
6.30-16.0
18.0-28.0
5.00-12.5
14.0-22.4
5.60-14.0
16.0-25.0
AA
AB
AC
AE
BA
CC
EE
CC
SK
SJ
AC
EE
BA
CC
DD
EE
HA
HB
HC
HD
21.65 10.83 31.06 32.56

33.90
24.80 12.40
35.20
32.72
5.87 22.05 3.94 13.19 1.38 26.38 0.79 44.88 17.65 1.97
7.79
3.41
1.18
5.94 24.80 4.33 14.76 1.65 29.53 0.79 50.39 19.62 1.38
7.79
3.80
3.54 11.42 2.36 19.29 15.55 3.74

17.52
3.54 12.80 3.74 20.87
4.33
16.34
31.50 15.75 35.98 39.09
5.67 27.56 4.33 18.70 1.65 35.43 0.79 60.04 22.06 0.91
7.39
3.29
3.54 16.73 3.74 23.23 18.70 4.33
1.38
31.50 15.75 35.98 39.09
5.67 28.54 4.33 17.72 1.65 35.43 0.79 60.04 22.06 0.91
7.39
3.29
3.54 15.75 3.74 23.23 18.70 4.33
1.38
High Speed Shaft

SJ
SH
.002
SK
1.81
17.717
5.31
1.91
19.685
5.41
2.13
20.472
5.08
2.13
20.472
5.08
TA
TB
2.7559 m6
2.3622 m6
3.1496 m6
2.7559 m6
3.3465 m6
3.1496 m6
3.3465 m6
3.1496 m6
2.93
2.52
3.35
2.93
3.54
3.35
3.54
3.35
0.79
0.71
0.87
0.79
RA
1.18
Approx
Wt
lb
TC
TE
TF
4.92
M20
1.65
9.65
48.43
3161
6.10
4.92
M20
1.65
10.43
54.33
3823
0.87
6.10
M20
1.65
11.61
63.98
6371
0.87
6.10
M20
1.65
11.61
63.98
6570
(161-110) 103
Type DVM3 Triple Reduction with Lube Pump & Drywell

W
C
RA
HB
AB
TB
E AA
TA
AB
TE (TAPPED HOLE)
TF (DEPTH)
HD
HC
4-HOLES
DD DIA. FOR
CLASS 8,8 BOLT
H
A
USABLE
LENGTH
TC
HA
AE
CLEARANCE
O
L
K
SH
DRIVE
SIZE
Ratios
31.5-90.0
M1150
100.0-140.0
M1160 31.5-140.0
M1170 31.5-140.0
DRIVE
SIZE
M1150
M1160
M1170
AA
AB
2.95
16.14 8.07
2.68
2.76 17.32 8.66
3.94 20.08 10.04
Ratios
31.5-90.0
100.0-140.0
31.5-90.0
100.0-140.0
31.5-140.0
AC
AE
23.21
25.79
22.95
24.70 28.03
25.87 28.50
BA
CC
EE
CC
SK
SJ
DD
EE
HA
HB
HC
7.79
3.42
4.45 16.93 3.94 11.02 1.38 22.05 0.79 35.43 15.53 1.97
4.25 19.09 3.94 11.81 1.38 24.80 0.79 39.76 16.91 1.97
7.79
7.79
3.45
3.46
.002
HD
SK
1.81
12.992
3.94
1.81
14.173
4.33
1.85
15.354
3.98
BA
TA
TB
TC
TE
TF
1.1811 j6
0.9843 j6
1.3780 k6
1.1811 j6
1.5748 k6
1.30
1.14
1.50
1.30
1.69
0.31
2.91
2.64
M10
0.87
M12
M10
M16
1.10
0.87
1.42
0.39
0.31
0.47
2.76
3.94
RA
11.32
3.54 8.66 2.36 15.35
3.41
11.06
3.54 9.25 2.36 16.73 11.89 3.35
3.54 10.04 2.36 16.93 13.15 3.54
High Speed Shaft

SH
EE
CC
4.21 15.16 3.94 10.43 1.38 20.87 0.79 32.48 14.90 2.17
SJ
AC
1.18
1.18
1.18
Approx
Wt
lb
7.68
36.02
1475
8.37
38.98
1761
8.46
43.31
2207
104 (161-110)
Type DVM3 Triple Reduction with Lube Pump & Drywell

W
C
RA
HB
AB
TB
E AA
TA
AB
TE (TAPPED HOLE)
TF (DEPTH)
HD
HC
4-HOLES
DD DIA. FOR
CLASS 8,8 BOLT
H
HA
A
USABLE
LENGTH
TC
AE
CLEARANCE
O
L
K
SH
DRIVE
SIZE
M1180
M1190
M1200
M1210
EE
CC
SK
SJ
AC
EE
BA
CC
Ratios
AA
AB
AC
AE
BA
CC
DD
EE
HA
HB
HC
HD
RA
31.5-140.0
31.5-140.0
25.0-112.0
28.0-125.0
3.94
3.94
5.12
5.12
21.65
24.80
31.50
31.50
10.83
12.40
15.75
15.75
29.88
31.59
34.80
34.80
32.56
35.20
39.09
39.09
5.87
5.94
5.67
5.67
22.05
24.80
27.56
28.54
3.94
4.33
4.33
4.33
13.19
14.76
18.70
17.72
1.38
1.65
1.65
1.65
26.38
29.53
35.43
35.43
0.79
0.79
0.79
0.79
44.88
50.39
60.04
60.04
17.65
19.62
22.06
22.06
1.97
1.38
0.91
0.91
7.79
7.79
7.39
7.39
3.41
3.80
3.29
3.29
3.54
3.54
3.54
3.54
11.42
12.80
16.73
15.75
2.36
3.74
3.74
3.74
19.29
20.87
23.23
23.23
14.37
15.22
17.52
17.52
3.74
4.33
4.33
4.33
1.18
1.18
1.38
1.38
DRIVE
SIZE
Ratios
M1180
31.5-140.0
31.5-90.0
100.0-140.0
25.0-112.0
28.0-125.0
M1190
M1200
M1210
High Speed Shaft

SH
SJ
SK
TA
TB
TC
TE
TF
1.81
.002
17.717
5.31
19.685
5.41
2.13
2.13
20.472
20.472
5.08
5.08
1.91
2.32
1.77
2.72
2.72
0.55
0.63
0.47
0.71
0.71
3.94
1.91
1.7717 k6
2.1654 m6
1.6535 k6
2.5591 m6
2.5591 m6
M16
M20
M16
M20
M20
1.42
1.65
1.42
1.65
1.65
3.94
4.92
4.92
Approx
Wt
lb
9.65
48.43
3206
10.43
54.33
3933
11.61
11.61
63.98
63.98
6471
6669
(161-110) 105
Type DBC Right Angle Shaft
orientations.
Type DBC Assemblies

Standard Assemblies
0045
Type DBC Relative Shaft Rotations
Other Available
Standard Assemblies & Relative Shaft Rotations
0456
0046
0045
0046
0456
Special Assemblies with Opposite Standard

Relative Shaft Rotations
045X
046X
456X
If the input shaft rotation is opposite the rotation shown, the

output shaft rotation will also be opposite the rotation shown.
Type DBL Right Angle Shaft
orientations.
Type DBL Assemblies

Standard Assemblies
Type DBL Relative Shaft Rotations
0045
0046
0045
0046
0456

045X
106 (161-110)
046X
456X
Type DBC,DBT, DBJ, DXA & DXC Right Angle Shaft
orientations.
Type DXA & DXC Assembly
Type DXC Assembly
L.S. Shaft Down
L.S. Shaft Up
0045
046X
Type DBT Assemblies
Type DBT Relative Shaft Rotations
Standard Assemblies
0045
0045
0046
Type DBJ Assemblies

Standard Assemblies
0045
0046
Type DBJ Relative Shaft Rotations
0045
0046
0046
Type DBQ Right Angle Shaft
orientations.
Type DBQ Assemblies
Type DBQ Relative Shaft Rotations
Standard Assemblies
0045
0046
0045
0046

If the input shaft rotation is opposite the rotation shown, the

output shaft rotation will also be opposite the rotation shown.
045X
046X
(161-110) 107

High
Approx
DRIVE SIZE
Speed Nom
LS
Shaft Ratio Shaft
rpm
rpm M1130 M1140 M1150 M1160 M1170 M1180
2.8
625 105 162 251 311 430 687
3.2
547 105 153 251 311 430 687
3.6
486 99.5 147 251 309 430 687
4.0
438 89.7 126 211 311 430 609
4.5
389 79.3 121 204 311 430 594
5.0
350 70.7 116 197 289 430 564
5.6
313 46.4 84.8 125 173 242 352
6.3
278 46.4 84.8 125 165 242 352
7.1
246 46.4 78.7 125 181 242 352
8.0
219 45.4 75.8 125 181 242 352
1750 9.0 194 40.5 72.2 116 167 242 352
10.0 175 35.9 61.7 87.1 118 203 295
11.2 156 32.2 52.1 78.6 113 188 272
12.5 140 28.4 48.8 70.5 101 160 252
14.0 125 25.7 45.8 67.2 98.3 161 232
16.0 109 22.7 41.2 58.3 94.2 137 210
18.0
97 20.1 35.6 54.1 68.8 119 148
20.0
88 17.7 33.4 48.7 68.8 112 148
22.4
78 16.1 31.1 46.6 65.1 103 148
25.0
70 14.2 26.9 36.9 58.3 94.1 142
2.8
511 89.7 141 216 262 374 597
3.2
447 89.7 133 216 262 374 597
3.6
397 81.3 128 216 253 374 597
4.0
358 73.3 103 172 262 374 498
4.5
318 64.8 98.9 167 262 374 486
5.0
286 57.8 94.6 161 236 374 461
5.6
255 38.3 70.0 103 141 200 297
6.3
227 38.3 70.0 103 135 200 297
7.1
201 38.3 64.3 103 151 200 297
8.0
179 37.1 61.9 103 151 200 297
1430 9.0 159 33.1 59.0 95.1 136 200 297
10.0 143 29.3 53.3 75.6 103 176 241
11.2 128 26.3 45.2 68.3 98.3 163 231
12.5 114 23.2 42.3 61.2 87.9 139 219
14.0 102 21.0 39.8 58.3 85.4 132 202
16.0
89 18.5 35.1 47.6 77.3 119 182
18.0
79 16.5 30.9 46.9 58.0 100 125
20.0
72 14.5 28.1 42.3 58.0 96.8 125
22.4
64 13.1 25.4 38.2 54.2 84.8 125
25.0
57 11.6 22.1 30.2 47.6 77.0 116
2.8
418 74.1 122 179 216 325 497
3.2
366 73.7 116 179 216 325 497
3.6
325 66.5 111 179 207 311 495
4.0
293 60.0 83.9 141 216 325 407
4.5
260 53.0 80.9 137 216 325 397
5.0
234 47.3 77.4 131 193 310 377
5.6
209 31.6 57.8 85.3 115 165 250
6.3
186 31.6 57.8 85.3 111 165 250
7.1
165 31.6 52.6 85.3 125 165 250
8.0
146 30.3 50.7 84.4 125 165 250
1170 9.0 130 27.0 48.3 78.2 112 165 250
10.0 117 24.0 43.6 65.7 89.2 153 197
11.2 104 21.5 39.3 59.3 85.5 141.0 189
12.5
94 19.0 36.7 53.2 76.4 121.0 179
14.0
84 17.2 33.2 49.2 70.9 109.0 168
16.0
73 15.2 28.8 39.0 63.3 98.8 153
18.0
65 13.5 25.4 40.2 48.8 84.6 105
20.0
59 11.8 23.0 34.7 48.1 79.2 105
22.4
52 10.8 20.8 31.3 44.4 69.5 105
25.0
47 9.48 18.1 24.7 38.9 63.0 95.0
High
Approx
DRIVE SIZE
Speed Nom
LS
Shaft Ratio Shaft
rpm
rpm M1130 M1140 M1150 M1160 M1170 M1180 M1190
2.8
625 10.9 16.9 26.5 32.8 45.5 70.5 83.7
3.2
547 12.3 17.6 29.5 36.6 49.9 80.9 88.6
3.6
486 12.9 19.4 32.5 40.2 56.8 90.5 102
4.0
438 12.9 18.3 31.0 45.4 63.9 88.8 109
4.5
389 12.9 19.6 33.4 50.4 71.6 95.0 115
5.0
350 12.9 21.3 36.2 52.6 79.0 104 117
5.6
313 9.51 17.1 25.8 35.1 48.6 72.7 89.8
6.3
278 10.5 19.6 28.4 37.2 55.3 81.3 103
7.1
246 11.7 20.2 32.2 45.6 62.2 90.0 114
8.0
219 12.9 21.6 35.9 50.6 69.7 98.7 114
1750 9.0 194 12.9 23.3 37.4 52.6 76.9 114 134
10.0 175 12.9 22.2 31.0 42.5 73.3 107 134
11.2 156 12.9 21.6 31.7 46.0 75.8 109 146
12.5 140 12.9 22.4 32.5 46.2 73.2 115 157
14.0 125 12.9 23.2 34.6 48.7 83.0 119 163
16.0 109 12.6 23.8 33.3 52.3 78.9 118 163
18.0
97 12.9 23.5 34.4 44.7 75.5 94.1 126
20.0
88 12.9 24.5 35.4 50.3 80.4 107 138
22.4
78 12.9 25.2 37.8 51.6 83.9 120 154
25.0
70 12.6 24.8 33.3 51.7 85.0 126 163
2.8
511 11.4 18.0 27.9 33.7 48.3 74.9 88.9
3.2
447 12.9 18.7 31.1 37.6 53.0 85.9 94.1
3.6
397 12.9 20.6 34.2 40.2 60.4 96.1 109
4.0
358 12.9 18.3 31.0 46.7 67.9 88.8 116
4.5
318 12.9 19.6 33.4 51.8 76.0 95.0 122
5.0
286 12.9 21.3 36.2 52.6 83.9 104 117
5.6
255 9.60 17.3 26.1 35.1 49.1 75.0 92.5
6.3
227 10.6 19.8 28.7 37.2 55.9 84.0 106
7.1
201 11.8 20.2 32.5 46.5 62.9 93.0 117
8.0
179 12.9 21.6 36.2 51.7 70.4 102 114
1430 9.0 159 12.9 23.3 37.6 52.6 77.8 118 138
10.0 143 12.9 23.5 32.9 45.2 78.0 107 134
11.2 128 12.9 22.9 33.7 48.8 80.6 114 146
12.5 114 12.9 23.8 34.5 49.1 77.8 122 159
14.0 102 12.9 24.7 36.7 51.7 83.4 127 163
16.0
89 12.6 24.8 33.3 52.5 83.8 125 163
18.0
79 12.9 25.0 36.5 46.0 77.9 97.0 130
20.0
72 12.9 25.2 37.6 51.8 85.1 110 142
22.4
64 12.9 25.2 38.0 52.6 84.1 124 159
25.0
57 12.6 24.9 33.3 51.7 85.1 126 163
2.8
418 11.5 19.1 28.2 34.1 51.3 76.2 93.4
3.2
366 12.9 19.9 31.5 38.0 56.3 87.5 99.9
3.6
325 12.9 21.9 34.6 40.2 61.5 97.5 115
4.0
293 12.9 18.3 31.0 47.2 72.1 88.8 123
4.5
260 12.9 19.6 33.4 52.4 80.7 95.0 130
5.0
234 12.9 21.3 36.2 52.6 85.1 104 117
5.6
209 9.69 17.5 26.3 35.1 49.7 77.3 93.5
6.3
186 10.7 20.0 29.0 37.2 56.3 86.5 107
7.1
165 11.9 20.2 32.9 47.0 63.5 95.8 119
8.0
146 12.9 21.6 36.2 52.2 71.2 105 114
1170 9.0 130 12.9 23.3 37.8 52.6 78.6 122 138
10.0 117 12.9 23.5 35.0 48.0 82.8 107 134
11.2 104 12.9 24.3 35.7 51.9 85.1 114 146
12.5
94 12.9 25.2 36.7 52.1 82.6 122 159
14.0
84 12.9 25.2 37.9 52.6 83.8 129 163
16.0
73 12.6 24.8 33.3 52.6 85.0 129 163
18.0
65 12.9 25.2 38.2 47.4 80.3 100 134
20.0
59 12.9 25.2 37.7 52.6 85.1 114 147
22.4
52 12.9 25.2 38.1 52.6 84.4 128 163
25.0
47 12.6 24.9 33.3 51.7 85.1 126 163
108 (161-110)
M1190 M1200
813
776
782
752
716
636
448
444
448
404
415
376
355
347
323
286
194
194
194
182
706
673
679
653
622
520
377
377
377
330
348
307
290
288
264
234
164
164
164
148
606
585
590
567
540
425
312
312
312
270
285
251
237
236
216
191
138
138
137
121
1313
1313
1283
1179
1147
1107
712
673
798
765
699
579
529
500
473
418
365
346
327
291
1129
1106
1048
964
937
905
582
550
693
664
607
503
459
434
410
363
311
300
284
252
923
905
858
788
767
740
476
450
580
561
527
437
399
377
357
315
258
258
239
217
M1200
137
148
163
170
185
200
140
149
200
214
219
203
208
221
233
230
230
244
257
256
144
153
163
170
185
200
140
149
212
228
233
216
222
235
247
244
240
259
274
272
144
153
163
170
185
200
140
149
217
235
247
229
235
249
263
260
243
272
281
286


High
Approx
DRIVE SIZE
Speed Nom
LS
Shaft Ratio Shaft
rpm
rpm M1130 M1140 M1150 M1160 M1170 M1180 M1190
2.8
346 62.0 107 150 181 284 416 508
3.2
303 61.1 101 150 180 273 416 508
3.6
269 55.1 97.5 148 172 258 411 508
4.0
243 49.7 69.6 117 181 285 338 497
4.5
216 44.0 67.1 113 180 284 329 474
5.0
194 39.2 64.2 109 160 257 313 353
5.6
173 26.4 48.3 71.3 95.7 138 209 261
6.3
154 26.4 48.3 71.3 91.6 136 209 261
7.1
137 26.4 43.6 71.3 104 138 209 261
8.0
121 25.1 42.0 70.0 103 138 209 224
970 9.0 108 22.4 40.0 65.0 92.5 138 209 236
10.0
97 19.9 36.1 57.6 77.1 131 163 208
11.2
87 17.9 33.7 52.0 71.8 117 157 197
12.5
78 15.7 30.4 45.2 63.8 103 148 195
14.0
69 14.3 27.5 40.9 58.8 90.3 140 179
16.0
61 12.6 23.9 32.3 52.5 82.1 128 159
18.0
54 11.2 21.1 33.4 41.6 72.1 89.8 118
20.0
49 9.82 19.0 28.8 39.9 65.7 89.8 118
22.4
43 8.92 17.2 26.0 36.8 57.8 89.2 114
25.0
39 7.86 15.0 20.5 32.3 52.2 78.7 101
2.8
311 55.9 99.6 135 163 255 376 459
3.2
272 54.8 94.0 135 161 245 376 459
3.6
242 49.5 90.4 133 154 232 368 459
4.0
218 44.6 62.4 105 163 262 303 459
4.5
193 39.4 60.2 101 161 254 295 439
5.0
174 35.2 57.6 97.8 144 230 280 316
5.6
155 23.8 43.5 64.3 85.9 125 189 235
6.3
138 23.8 43.5 64.3 82.2 122 189 235
7.1
123 23.8 39.1 64.3 93.9 125 189 235
8.0
109 22.6 37.7 62.8 92.7 125 189 201
870 9.0 97 20.1 35.9 58.4 83.0 125 189 212
10.0
87 17.8 32.4 53.4 69.1 117 147 187
11.2
78 16.0 30.2 47.0 64.4 105 141 176
12.5
70 14.1 27.3 40.6 57.2 92.6 133 175
14.0
62 12.8 24.7 36.7 52.7 81.8 125 161
16.0
54 11.3 21.4 29.0 47.1 73.6 115 142
18.0
48 10.0 18.9 30.0 37.9 65.7 81.2 107
20.0 43.5 8.81 17.1 25.9 35.8 58.9 81.2 107
22.4 38.8 8.00 15.5 23.4 33.0 51.9 80.1 102
25.0 34.8 7.05 13.5 18.4 29.0 46.8 70.6 90.2
M1200
765
750
711
654
636
614
395
373
481
465
445
383
350
331
313
277
216
216
199
181
687
673
638
586
570
550
354
335
431
417
399
355
324
307
283
256
195
195
178
162

High
Approx
DRIVE SIZE
Speed Nom
LS
Shaft Ratio Shaft
rpm
rpm M1130 M1140 M1150 M1160 M1170 M1180 M1190
2.8
346 11.6 20.2 28.5 34.4 54.2 77.1 94.4
3.2
303 12.9 21.0 31.8 38.1 57.2 88.4 105
3.6
269 12.9 23.2 34.6 40.2 61.5 97.5 120
4.0
243 12.9 18.3 31.0 47.7 76.2 88.8 130
4.5
216 12.9 19.6 33.4 52.6 85.1 95.0 137
5.0
194 12.9 21.3 36.2 52.6 85.1 104 117
5.6
173 9.77 17.6 26.6 35.1 50.1 78.1 94.4
6.3
154 10.8 20.2 29.2 37.2 56.3 87.3 108
7.1
137 12.0 20.2 33.1 47.4 64.1 96.7 120
8.0
121 12.9 21.6 36.2 52.3 71.8 106 114
970 9.0 108 12.9 23.3 37.9 52.6 79.3 123 138
10.0
97 12.9 23.5 37.0 50.0 85.1 107 134
11.2
87 12.9 25.2 37.8 52.6 85.1 114 146
12.5
78 12.9 25.2 37.6 52.6 85.1 122 163
14.0
69 12.9 25.2 38.0 52.6 84.1 130 163
16.0
61 12.6 24.9 33.3 52.6 85.1 129 163
18.0
54 12.9 25.2 38.3 48.7 82.5 103 137
20.0
49 12.9 25.2 37.8 52.6 85.1 117 151
22.4
43 12.9 25.2 38.1 52.6 84.5 131 163
25.0
39 12.6 25.0 33.3 51.7 85.1 126 163
2.8
311 11.7 20.9 28.7 34.6 54.2 77.6 95.0
3.2
272 12.9 21.7 32.0 38.1 57.2 88.9 105
3.6
242 12.9 23.9 34.6 40.2 61.5 97.5 121
4.0
218 12.9 18.3 31.0 47.9 78.2 88.8 134
4.5
193 12.9 19.6 33.4 52.6 85.1 95.0 142
5.0
174 12.9 21.3 36.2 52.6 85.1 104 117
5.6
155 9.81 17.7 26.7 35.1 50.4 78.5 94.9
6.3
138 10.9 20.3 29.4 37.2 56.3 87.8 109
7.1
123 12.0 20.2 33.3 47.7 64.4 97.2 120
8.0
109 12.9 21.6 36.2 52.3 72.2 107 114
870 9.0 97 12.9 23.3 38.0 52.6 79.7 123 138
10.0
87 12.9 23.5 38.2 50.0 85.1 107 134
11.2
78 12.9 25.2 38.1 52.6 85.1 114 146
12.5
70 12.9 25.2 37.7 52.6 85.1 122 159
14.0
62 12.9 25.2 38.0 52.6 84.2 130 163
16.0
54 12.6 24.9 33.3 52.6 85.1 130 163
18.0
48 12.9 25.2 38.3 49.5 83.8 104 140
20.0 43.5 12.9 25.2 37.8 52.6 85.1 118 153
22.4 38.8 12.9 25.2 38.2 52.6 84.6 131 163
25.0 34.8 12.6 25.0 33.3 51.7 85.1 126 163
M1200
144
153
163
170
185
200
140
149
217
235
252
242
249
264
278
275
245
275
282
287
144
153
163
170
185
200
140
149
217
235
252
250
257
272
280
284
246
276
282
287
(161-110) 109
Type DB(All Sizes) & DX(Sizes M1130-M1210) Right Angle Shaft

High
Speed
Shaft
rpm
1750
1430
1170
Nom
Ratio
8.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
8.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
8.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
110 (161-110)
Approx
LS
Shaft
rpm
219
194
175
156
140
125
109
97
88
78
70
63
56
49
44
39
35
31
28
25
22
19
18
16
14
179
159
143
128
114
102
89
79
72
64
57
51
45
40
36
32
29
26
23
20
18
16
14
13
11
146
130
117
104
94
84
73
65
59
52
47
42
37
33
29
26
23
21
19
16
15
13
12
10
9.4
DRIVE SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
M1220
M1230
M1240
M1250
...
...
...
...
...
118
110
103
92.1
80.2
74.7
54.6
54.6
53.8
46.7
43.5
39.0
35.1
27.6
23.9
23.9
21.5
19.3
15.0
15.0
...
...
...
...
...
102
93.5
84.9
75.9
66.1
61.5
45.1
45.1
44.2
38.4
35.7
31.9
28.7
22.6
19.5
19.5
17.7
15.8
12.3
12.3
...
...
...
...
...
87.2
77.1
70.0
62.6
54.4
50.6
37.2
37.2
36.3
31.5
29.3
26.2
23.5
18.5
16.0
16.0
14.6
13.0
10.1
10.1
...
...
...
...
...
179
170
151
136
123
109
99.0
86.6
78.3
70.5
62.3
55.8
48.7
43.9
39.8
35.0
30.6
27.6
25.0
22.0
...
...
...
...
...
155
141
124
112
101
89.2
81.1
70.9
64.1
57.8
51.0
45.7
39.8
35.9
32.6
28.6
25.0
22.6
20.4
17.9
...
...
...
...
...
128
116
102
91.7
82.8
73.1
66.5
58.1
52.5
47.3
41.8
37.4
32.6
29.4
26.7
23.4
20.5
18.5
16.7
14.7
...
...
...
...
...
262
256
233
206
186
165
147
134
119
107
94.9
86.3
76.3
66.7
59.8
53.9
48.5
42.4
38.0
34.2
...
...
...
...
...
216
210
192
169
152
135
121
110
97.3
87.4
77.7
70.6
62.4
54.6
48.9
44.1
39.7
34.7
31.1
28.0
...
...
...
...
...
179
173
157
139
125
111
99.2
90.3
79.7
71.7
63.7
57.9
51.2
44.7
40.1
36.1
32.5
28.4
25.4
22.9
...
...
...
...
...
354
354
354
318
290
259
210
201
169
151
151
130
117
104
96.4
78.3
73.7
65.6
60.4
49.4
...
...
...
...
...
299
293
291
260
238
213
172
164
139
124
124
108
96.1
85.5
78.8
64.3
60.3
53.6
49.4
40.5
...
...
...
...
...
244
240
238
212
196
174
141
134
114
101
101
88.8
78.7
70.1
64.6
52.8
49.4
43.9
40.5
33.2
...
...
...
...
...
483
483
483
449
402
365
285
285
262
235
213
188
168
149
132
118
107
94.9
84.1
75.6
...
...
...
...
...
419
420
407
369
330
299
235
235
215
192
174
154
138
122
108
96.9
87.8
77.6
68.8
61.8
...
...
...
...
...
365
353
333
303
271
246
195
195
176
158
143
126
113
100
88.4
79.4
71.9
63.6
56.3
50.6
...
...
...
...
...
776
762
689
625
572
496
415
392
358
329
286
255
232
204
182
166
147
130
116
106
...
...
...
...
...
674
623
563
513
470
408
342
321
292
268
234
209
190
167
149
136
121
106
94.5
86.5
...
...
...
...
...
563
510
461
420
386
335
280
262
239
220
192
171
155
137
122
112
98.8
86.9
77.4
70.8
...
...
...
...
...
893
853
858
839
781
682
529
529
499
452
393
357
311
284
255
226
198
181
162
144
...
...
...
...
...
776
740
745
709
643
560
444
444
409
371
323
292
255
233
209
185
162
148
133
118
...
...
...
...
...
674
643
644
583
528
460
368
368
336
304
265
240
209
191
171
152
133
121
109
96.3
...
...
...
1469
1469
1452
1289
1158
1041
954
857
758
680
609
546
487
435
391
350
307
274
246
220
...
...
...
...
...
1276
1276
1199
1063
954
856
790
704
622
558
500
448
399
357
320
287
251
224
201
180
...
...
...
...
...
1109
1109
989
876
786
705
650
579
511
458
410
368
327
293
263
235
206
184
165
148
...
...
...
...
...
...
1469
1469
1469
1390
1249
1122
954
923
817
732
656
588
524
469
421
377
330
295
265
237
...
...
...
...
...
1276
1276
1276
1145
1028
923
828
759
671
601
539
483
430
384
345
309
270
242
217
194
...
...
...
...
...
1109
1109
1066
944
847
759
700
623
551
494
442
396
352
315
283
253
222
198
178
159
...
3453
3453
3235
2871
2591
2321
2116
1907
1703
1529
1371
1209
1099
988
879
787
704
617
551
...
...
...
...
...
...
2864
2864
2691
2383
2146
1919
1748
1573
1404
1259
1128
994
903
811
722
646
577
505
450
...
...
...
...
...
...
2376
2376
2233
1974
1775
1586
1443
1297
1156
1036
928
817
742
666
592
530
474
415
368
...
...
...
...
...
...
...
3453
3453
3453
3252
2934
2606
2397
2160
1920
1732
1552
1332
1245
1118
996
892
797
698
613
...
...
...
...
...
...
2864
2864
2829
2698
2431
2130
1980
1775
1569
1420
1277
1108
1023
918
817
731
654
572
501
...
...
...
...
...
...
2376
2376
2315
2235
2011
1743
1634
1452
1295
1174
1050
919
840
754
671
600
536
469
410
...
...
...
...
...
5724
5693
4982
4483
4031
3676
3299
2976
2667
2372
2110
1927
1722
1547
1382
1225
1086
971
887
...
...
...
...
...
...
4695
4665
4138
3732
3348
3049
2731
2460
2202
1956
1738
1586
1416
1271
1135
1005
891
797
727
...
...
...
...
...
...
3841
3841
3443
3099
2776
2524
2258
2031
1816
1612
1431
1305
1164
1045
932
825
731
654
597
...
...
...
...
...
...
...
5724
5724
5683
5113
4598
4193
3763
3394
3043
2706
2407
2077
1964
1741
1574
1397
1239
1085
990
...
...
...
...
...
...
4695
4695
4695
4257
3819
3477
3115
2784
2497
2211
1982
1720
1615
1448
1294
1147
1016
897
818
...
...
...
...
...
...
3841
3841
3841
3535
3166
2879
2576
2278
2043
1816
1632
1424
1328
1192
1063
942
834
741
675
...
...
...
...
...

High
Speed
Shaft
rpm
1750
1430
1170
Nom
Ratio
8.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
8.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
8.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
Approx
LS
Shaft
rpm
219
194
175
156
140
125
109
97
88
78
70
63
56
49
44
39
35
31
28
25
22
19
18
16
14
179
159
143
128
114
102
89
79
72
64
57
51
45
40
36
32
29
26
23
20
18
16
14
13
11
146
130
117
104
94
84
73
65
59
52
47
42
37
33
29
26
23
21
19
16
15
13
12
10
9.4
DRIVE SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
M1220
M1230
M1240
M1250
...
...
...
...
...
60.0
63.1
65.5
65.1
64.1
67.0
54.9
60.8
66.4
65.3
68.1
68.9
69.0
67.9
65.2
65.2
67.7
69.2
65.5
65.5
...
...
...
...
...
63.8
65.8
66.2
65.6
64.6
67.5
55.5
61.4
66.8
65.6
68.4
69.0
69.1
68.1
65.4
65.4
68.3
69.2
65.6
65.6
...
...
...
...
...
66.3
66.4
66.7
66.1
65.0
67.9
56.0
62.0
67.0
65.9
68.7
69.1
69.1
68.2
65.5
65.5
68.8
69.3
65.7
65.7
...
...
...
...
...
94.4
98.5
100
100
101
101
101
101
101
101
102
102
102
102
102
102
102
102
102
102
...
...
...
...
...
100
100
101
101
101
101
101
101
102
102
102
102
102
102
102
102
102
102
102
102
...
...
...
...
...
101
101
101
101
101
101
102
102
102
102
102
102
102
102
102
102
102
102
102
102
...
...
...
...
...
140
152
153
153
153
154
154
154
155
155
155
155
155
155
156
156
156
156
156
156
...
...
...
...
...
141
153
153
154
154
154
155
155
155
155
155
155
156
156
156
156
156
156
156
156
...
...
...
...
...
143
154
154
154
154
155
155
155
155
155
155
156
156
156
156
156
156
156
156
156
...
...
...
...
...
184
206
227
229
232
233
212
223
235
235
235
232
236
236
236
215
237
237
237
217
...
...
...
...
...
190
208
228
229
233
234
212
223
235
236
236
236
236
236
236
216
237
237
237
217
...
...
...
...
...
190
208
228
229
234
235
212
223
236
236
236
236
236
237
237
217
237
237
237
218
...
...
...
...
...
253
277
316
330
331
331
283
322
334
334
335
335
336
336
336
337
337
337
337
338
...
...
...
...
...
269
295
325
331
332
333
286
326
335
335
336
336
336
337
337
337
337
338
338
338
...
...
...
...
...
285
303
325
333
333
334
289
329
336
336
336
337
337
337
337
338
338
338
338
338
...
...
...
...
...
403
453
459
461
462
464
434
459
463
466
469
470
471
472
472
472
473
473
474
474
...
...
...
...
...
428
453
459
463
465
466
437
459
463
466
471
471
472
472
473
473
474
474
474
474
...
...
...
...
...
437
453
459
463
466
468
437
459
463
466
472
472
473
473
474
474
474
474
475
475
...
...
...
...
...
452
479
552
597
616
619
521
597
624
625
627
628
629
630
630
631
632
632
633
633
...
...
...
...
...
481
509
587
618
620
622
536
614
626
627
629
629
630
631
632
632
633
633
634
634
...
...
...
...
...
510
540
620
621
623
625
542
621
628
629
630
631
632
632
633
633
634
634
634
635
...
...
...
649
704
783
789
793
796
793
802
805
807
810
811
813
815
816
817
819
819
820
821
...
...
...
...
...
690
748
791
796
799
802
804
807
809
811
813
814
816
817
818
819
820
821
822
822
...
...
...
...
...
733
794
798
801
804
807
808
810
812
814
815
817
818
819
820
821
821
822
823
823
...
...
...
...
...
...
791
791
890
955
960
965
891
971
975
977
980
982
984
986
987
989
990
991
992
993
...
...
...
...
...
840
840
946
964
968
971
947
977
979
982
984
985
987
989
990
991
992
993
994
995
...
...
...
...
...
892
892
966
970
974
977
978
981
983
985
987
988
990
991
992
993
994
995
995
996
...
995
1121
1184
1198
1209
1219
1227
1234
1242
1248
1253
1259
1263
1267
1271
1274
1276
1279
1272
...
...
...
...
...
...
1010
1138
1205
1217
1226
1234
1240
1246
1252
1257
1262
1267
1270
1273
1276
1278
1281
1283
1272
...
...
...
...
...
...
1025
1154
1222
1232
1239
1246
1251
1256
1261
1265
1269
1273
1275
1278
1280
1282
1284
1286
1272
...
...
...
...
...
...
...
1105
1245
1403
1506
1520
1520
1542
1552
1553
1569
1576
1540
1587
1592
1597
1601
1604
1608
1573
...
...
...
...
...
...
1121
1263
1406
1530
1541
1520
1559
1561
1553
1573
1586
1567
1596
1600
1604
1607
1610
1613
1573
...
...
...
...
...
...
1137
1281
1406
1549
1558
1520
1572
1561
1567
1590
1595
1589
1603
1606
1609
1612
1614
1617
1573
...
...
...
...
...
1651
1826
1826
1840
1861
1877
1893
1908
1921
1933
1944
1952
1960
1968
1974
1981
1986
1991
1994
...
...
...
...
...
...
1657
1831
1856
1874
1891
1904
1918
1930
1941
1951
1960
1966
1973
1979
1984
1989
1994
1998
2000
...
...
...
...
...
...
1657
1842
1887
1902
1916
1927
1938
1948
1956
1965
1972
1977
1983
1988
1992
1996
2000
2003
2005
...
...
...
...
...
...
...
1836
2042
2316
2334
2360
2381
2402
2420
2437
2453
2467
2340
2487
2463
2502
2513
2520
2473
2474
...
...
...
...
...
...
1843
2049
2341
2378
2399
2416
2433
2429
2447
2453
2486
2370
2503
2506
2517
2524
2529
2501
2501
...
...
...
...
...
...
1843
2049
2341
2413
2431
2445
2459
2429
2447
2462
2502
2400
2516
2522
2527
2533
2537
2525
2522
...
...
...
...
...
(161-110) 111

High
Speed
Shaft
rpm
970
870
Nom
Ratio
8.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
8.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
112 (161-110)
Approx
LS
Shaft
rpm
121
108
97
87
78
69
61
54
49
43
39
35
31
27
24
22
19
17
15
14
12
11
9.7
8.7
7.8
109
97
87
78
70
62
54
48
44
39
35
31
28
25
22
19
17
16
14
12
11
9.7
8.7
7.8
7.0
DRIVE SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
M1220
M1230
M1240
M1250
...
...
...
...
...
73.0
64.3
58.4
52.2
45.3
42.2
31.1
31.1
30.2
26.2
24.4
21.7
19.5
15.4
13.3
13.3
12.2
10.7
8.34
8.34
...
...
...
...
...
65.8
57.9
52.5
46.9
40.8
37.9
28.0
28.0
27.1
23.5
21.9
19.5
17.5
13.8
12.0
12.0
11.0
9.64
7.49
7.49
...
...
...
...
...
106
96.5
84.4
76.1
68.8
60.7
55.2
48.3
43.6
39.3
34.7
31.0
27.1
24.4
22.1
19.4
17.0
15.3
13.9
12.2
...
...
...
...
...
95.4
86.7
75.8
68.2
61.7
54.5
49.6
43.3
39.2
35.3
31.1
27.9
24.3
21.9
19.9
17.4
15.2
13.7
12.5
10.9
...
...
...
...
...
150
144
131
116
104
92.3
82.3
75.0
66.2
59.5
52.8
48.0
42.5
37.1
33.3
29.9
27.0
23.6
21.1
19.0
...
...
...
...
...
135
129
118
104
93.3
82.9
73.8
67.3
59.4
53.4
47.4
43.1
38.1
33.3
29.8
26.9
24.2
21.1
18.9
17.0
...
...
...
...
...
202
199
197
176
163
145
117
111
94.4
84.1
84.1
73.7
65.4
58.1
53.6
43.8
41.0
36.4
33.6
27.6
...
...
...
...
...
182
178
177
158
146
130
105
99.8
84.8
75.5
75.5
66.2
58.6
52.2
48.1
39.4
36.7
32.7
30.1
24.7
...
...
...
...
...
304
292
276
252
225
204
163
163
147
131
119
104
93.7
82.8
73.4
65.9
59.7
52.7
46.7
42.0
...
...
...
...
...
272
262
248
226
202
184
147
147
132
118
107
93.8
84.0
74.3
65.8
59.1
53.6
47.3
41.9
37.7
...
...
...
...
...
467
422
382
348
320
278
232
218
198
182
160
142
129
114
101
92.5
82.0
72.1
64.2
58.8
...
...
...
...
...
419
379
342
312
287
250
208
195
178
163
143
128
116
102
90.7
83.0
73.6
64.7
57.6
52.7
...
...
...
...
...
591
564
537
486
440
383
308
308
279
253
220
199
174
158
142
126
110
101
90.2
79.9
...
...
...
...
...
541
523
482
437
395
344
277
277
251
227
197
179
156
142
127
113
99.0
90.2
80.9
71.7
...
...
...
972
926
825
730
655
587
541
482
425
381
341
305
272
243
218
195
171
153
137
123
...
...
...
...
...
901
833
742
657
589
527
486
433
382
342
306
274
244
218
196
175
153
137
123
110
...
...
...
...
...
...
972
972
889
787
705
632
583
519
458
410
367
329
293
262
235
210
184
164
147
132
...
...
...
...
...
898
898
800
707
634
568
524
466
411
368
330
295
263
235
211
189
165
147
132
118
...
1995
1995
1871
1652
1484
1324
1204
1082
964
863
772
680
617
554
492
440
394
344
305
...
...
...
...
...
...
1802
1802
1687
1488
1337
1192
1084
973
867
776
694
611
555
497
442
396
353
309
274
...
...
...
...
...
...
...
1995
1995
1919
1871
1681
1450
1364
1225
1091
978
875
770
699
627
558
499
446
390
340
...
...
...
...
...
...
1802
1802
1721
1686
1514
1315
1227
1102
981
879
786
692
628
563
501
448
400
350
305
...
...
...
...
...
3184
3184
2891
2599
2324
2111
1887
1696
1515
1344
1192
1087
969
869
775
686
608
543
496
...
...
...
...
...
...
2856
2856
2609
2344
2095
1902
1699
1526
1363
1209
1072
977
871
781
696
616
546
488
445
...
...
...
...
...
...
...
3184
3184
3184
2964
2639
2408
2152
1897
1717
1533
1360
1194
1105
992
884
783
693
619
563
...
...
...
...
...
...
2856
2856
2856
2673
2367
2170
1938
1720
1555
1379
1222
1078
993
891
794
703
623
556
507
...
...
...
...
...

High
Speed
Shaft
rpm
970
870
Nom
Ratio
8.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
8.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
Approx
LS
Shaft
rpm
121
108
97
87
78
69
61
54
49
43
39
35
31
27
24
22
19
17
15
14
12
11
9.7
8.7
7.8
109
97
87
78
70
62
54
48
44
39
35
31
28
25
22
19
17
16
14
12
11
9.7
8.7
7.8
7.0
DRIVE SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
M1220
M1230
M1240
M1250
...
...
...
...
...
67.0
66.8
67.1
66.5
65.4
68.2
56.4
62.5
67.3
66.0
68.8
69.2
69.2
68.4
65.6
65.6
69.3
69.3
65.8
65.8
...
...
...
...
...
67.3
67.0
67.3
66.7
65.5
68.3
56.7
62.8
67.4
66.1
68.9
69.2
69.2
68.4
65.7
65.7
69.3
69.3
65.8
65.8
...
...
...
...
...
101
101
101
101
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
...
...
...
...
...
101
101
101
101
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
...
...
...
...
...
144
154
154
155
155
155
155
155
155
156
156
156
156
156
156
156
156
156
156
156
...
...
...
...
...
145
154
155
155
155
155
155
155
156
156
156
156
156
156
156
156
156
156
156
156
...
...
...
...
...
190
208
228
229
235
235
212
223
236
236
236
237
237
237
237
217
237
237
237
218
...
...
...
...
...
190
208
228
229
235
235
212
223
236
237
237
237
237
237
237
217
237
237
237
218
...
...
...
...
...
287
303
325
334
334
335
292
332
336
336
337
337
337
338
338
338
338
338
338
338
...
...
...
...
...
287
303
325
334
335
335
293
334
336
337
337
337
337
338
338
338
338
338
338
338
...
...
...
...
...
437
453
459
463
466
470
437
459
463
466
473
473
473
474
474
474
475
475
475
475
...
...
...
...
...
437
453
459
463
466
470
437
459
463
466
473
473
474
474
474
474
475
475
475
475
...
...
...
...
...
540
571
623
624
625
627
547
627
630
630
631
632
633
633
633
634
634
635
635
635
...
...
...
...
...
551
590
624
625
627
628
550
630
631
631
632
632
633
633
634
634
635
635
635
635
...
...
...
775
800
803
806
808
810
812
813
815
816
817
819
820
820
821
822
822
823
823
824
...
...
...
...
...
801
803
806
808
810
812
813
815
816
817
819
819
820
821
822
822
823
823
824
824
...
...
...
...
...
...
944
944
972
976
978
981
982
984
986
988
989
990
992
993
993
994
995
996
996
997
...
...
...
...
...
972
972
975
978
981
983
984
986
988
989
990
991
992
993
994
995
996
996
997
997
...
1038
1169
1236
1244
1249
1255
1259
1264
1268
1271
1274
1277
1279
1282
1284
1285
1287
1289
1272
...
...
...
...
...
...
1045
1177
1242
1249
1255
1260
1264
1267
1271
1274
1277
1280
1282
1283
1285
1287
1288
1290
1272
...
...
...
...
...
...
...
1152
1297
1406
1563
1571
1525
1583
1588
1593
1598
1602
1605
1608
1611
1613
1616
1617
1620
1573
...
...
...
...
...
...
1160
1306
1406
1570
1577
1542
1588
1593
1597
1601
1605
1608
1611
1613
1615
1617
1619
1621
1573
...
...
...
...
...
1657
1842
1911
1924
1935
1944
1954
1961
1969
1976
1982
1986
1991
1995
1998
2002
2005
2007
2009
...
...
...
...
...
...
1657
1842
1923
1935
1945
1953
1961
1968
1975
1981
1987
1990
1995
1998
2001
2005
2007
2010
2011
...
...
...
...
...
...
...
1843
2049
2341
2441
2444
2467
2478
2440
2480
2507
2514
2427
2526
2531
2535
2540
2544
2543
2539
...
...
...
...
...
...
1843
2049
2341
2454
2444
2478
2488
2467
2505
2513
2520
2442
2531
2535
2539
2543
2547
2550
2547
...
...
...
...
...
(161-110) 113
Basic Thermal Ratings Hp/Double Reduction

High
Speed
Shaft
rpm
DRIVE SIZE
Nominal
Ratio
Auxiliary
Cooling
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
2.88
Thru
4.48
5.04
Thru
11.2
12.5
Thru
25
2.88
Thru
4.48
5.04
Thru
11.2
12.5
Thru
25.6
2.88
Thru
4.48
5.04
Thru
11.2
12.5
Thru
25.6
2.88
Thru
4.48
5.04
Thru
11.2
12.5
Thru
25.4
2.88
Thru
4.48
5.04
Thru
11.2
12.5
Thru
25.4
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
100
147
267
77
122
221
46
73
132
92
137
253
73
108
199
42
62
115
90
125
237
69
95
181
39
55
102
85
115
220
66
87
167
36
49
92
84
109
210
63
84
160
35
46
90
146
231
419
123
195
354
80
126
230
144
214
396
116
174
321
74
111
203
140
195
372
111
154
295
70
97
185
136
181
347
106
141
272
66
88
169
133
174
333
105
137
262
66
85
164
199
314
571
171
270
490
116
183
333
197
293
540
162
241
445
109
161
300
192
266
508
155
216
412
104
144
274
186
248
475
150
199
382
99
132
253
182
238
456
147
193
370
98
129
246
220
347
631
192
302
550
137
217
393
218
323
598
183
276
503
130
193
357
213
295
564
176
245
468
125
174
330
207
276
528
171
227
435
120
160
307
203
266
510
168
220
421
119
155
298
248
392
711
221
350
634
167
262
476
246
365
676
213
315
582
160
237
437
242
337
644
206
286
546
154
214
409
237
314
602
200
266
511
150
200
382
232
305
585
197
259
496
148
195
371
290
458
832
262
413
752
207
328
595
288
427
790
253
375
694
200
297
549
283
393
749
246
343
652
195
270
515
277
368
707
241
321
615
190
253
486
273
357
685
238
312
598
189
248
475
325
514
932
297
469
851
242
382
696
323
479
886
288
427
790
235
349
644
318
442
843
281
391
746
230
319
609
312
416
797
276
367
703
225
300
575
308
403
773
273
357
685
224
294
569
413
652
1185
385
609
1105
330
522
948
412
609
1128
377
557
1032
323
479
886
406
564
1077
370
514
980
318
442
843
400
532
1021
364
484
928
314
417
799
396
519
994
361
473
907
312
409
784
1750
1430
1170
970
870
114 (161-110)
Type DB & DX
Right Angle Shaft - Sizes M1130-M1210
Hp/Triple Reduction

HSS
rpm
Nominal
Ratio
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
1750
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
Auxiliary
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
M1130
...
...
...
...
...
...
80
131
177
75
125
169
69
126
161
66
126
153
63
107
151
61
101
137
61
87
158
61
87
158
61
87
158
61
87
158
61
87
158
61
87
158
61
87
158
61
87
158
33
52
101
33
52
101
33
52
101
33
52
101
33
52
101
33
52
101
M1140
...
...
...
...
...
...
101
176
251
88
168
215
84
160
215
80
152
201
83
151
201
76
151
201
88
151
271
88
151
271
88
151
271
88
151
271
88
151
271
88
151
271
88
151
271
88
151
271
61
90
164
61
90
164
61
90
164
61
90
164
61
90
164
61
90
164
M1150
...
...
...
...
...
...
109
213
300
104
215
271
101
201
251
101
201
251
101
176
224
88
168
215
126
201
350
126
201
350
126
201
350
126
201
350
126
201
350
126
201
350
126
201
350
126
201
350
83
131
250
83
131
250
83
131
250
83
131
250
83
131
250
83
131
250
M1160
...
...
...
...
...
...
130
237
351
126
237
351
126
237
311
126
213
301
126
200
301
110
201
269
141
216
401
137
216
401
137
216
401
137
216
401
137
216
401
137
216
401
137
216
401
137
216
401
101
155
301
101
155
301
101
155
301
101
155
301
101
155
301
101
155
301
DRIVE SIZE
M1170
...
...
...
...
...
...
151
271
451
151
271
401
129
251
401
126
251
357
126
220
351
126
215
351
158
250
453
158
250
453
158
250
453
158
250
453
158
250
453
158
250
453
158
250
453
158
250
453
126
201
351
126
201
351
126
201
351
126
201
351
126
201
351
126
201
351
M1180
...
...
...
...
...
...
127
351
519
130
351
537
133
351
501
135
335
501
151
305
445
151
332
429
201
215
537
201
215
537
201
215
537
201
215
537
201
215
537
201
215
537
201
215
537
201
215
537
151
351
451
151
351
451
151
351
451
151
351
451
151
351
451
151
351
451
M1190
...
...
...
...
...
...
43
302
518
61
335
537
76
335
537
88
335
537
103
335
522
126
351
501
215
425
608
215
425
608
215
425
608
215
425
608
215
425
608
215
425
608
215
425
608
215
425
608
173
301
501
173
301
501
173
301
501
173
301
501
173
301
501
173
301
501
M1200
42
335
79
351
126
361
153
401
201
451
225
451
301
601
801
301
601
801
301
601
801
301
601
801
301
601
801
301
601
801
301
601
801
301
601
801
251
401
701
251
401
701
251
401
701
251
401
701
251
401
701
251
401
701
...
...
...
...
...
...
M1210
...
...
...
42
335
79
351
126
361
153
401
201
451
225
451
301
601
801
301
601
801
301
601
801
301
601
801
301
601
801
301
601
801
301
601
801
301
601
801
251
401
701
253
401
701
251
401
701
251
401
701
251
401
701
251
401
701
...
...
...
ss For Type DX, apply a multiplier of 0.8 to the thermal ratings.
(161-110) 115
Type DB & DX
Hp/Triple Reduction

HSS
rpm
Nominal
Ratio
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
1430
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
Auxiliary
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
M1130
...
...
...
...
...
...
76
126
178
76
110
157
66
105
151
63
102
151
62
102
135
62
90
128
52
77
151
52
77
151
52
77
151
52
77
151
52
77
151
52
77
151
52
77
151
30
44
82
30
44
82
30
44
82
30
44
82
30
44
82
30
44
82
30
44
82
M1140
...
...
...
...
...
...
90
155
211
86
151
216
82
151
201
82
151
201
78
134
201
76
126
178
83
126
251
83
126
251
83
126
251
83
126
251
83
126
251
83
126
251
83
126
251
53
79
151
53
79
151
53
79
151
53
79
151
53
79
151
53
79
151
53
79
151
M1150
...
...
...
...
...
...
107
201
269
102
179
269
102
178
251
102
178
222
90
155
216
86
151
216
126
178
351
126
178
351
126
178
351
126
178
351
126
178
351
126
178
351
126
178
351
78
126
216
78
126
216
78
126
216
78
126
216
78
126
216
78
126
216
78
126
216
M1160
...
...
...
...
...
...
131
216
336
126
216
336
126
201
301
126
179
301
112
178
269
108
178
269
131
201
360
131
201
360
131
201
360
131
201
360
131
201
360
131
201
360
131
201
360
102
151
269
102
151
269
102
151
269
102
151
269
102
151
269
102
151
269
102
151
269
DRIVE SIZE
M1170
...
...
...
...
...
...
151
251
423
151
251
401
151
222
359
131
216
351
126
216
351
126
201
336
152
225
451
152
225
451
152
225
451
152
225
451
152
225
451
152
225
451
152
225
451
126
178
336
126
178
336
126
178
336
126
178
336
126
178
336
126
178
336
126
178
336
M1180
...
...
...
...
...
...
178
351
537
160
336
537
158
304
501
156
301
477
154
301
477
154
301
477
178
301
451
178
301
451
178
301
451
178
301
451
178
301
451
178
301
451
178
301
451
151
216
423
151
216
423
151
216
423
151
216
423
151
216
423
151
216
423
151
216
423
M1190
...
...
...
...
...
...
126
351
601
126
351
540
132
336
537
151
336
537
151
336
537
151
304
501
216
336
601
216
336
601
216
336
601
216
336
601
216
336
601
216
336
601
216
336
601
178
269
501
178
269
501
178
269
501
178
269
501
178
269
501
178
269
501
178
269
501
M1200
X
251
601
X
269
601
X
271
601
X
301
601
X
301
601
34
336
601
151
218
423
269
423
801
269
423
801
269
423
801
269
423
801
269
423
801
269
423
801
251
351
672
251
351
672
251
351
672
251
351
672
251
351
672
251
351
672
251
351
672
...
...
...
...
...
...
M1210
...
...
...
X
251
601
X
269
601
X
271
601
X
301
601
X
301
601
34
336
601
151
218
423
269
423
801
269
423
801
269
423
801
269
423
801
269
423
801
269
423
801
251
351
672
251
351
672
251
351
672
251
351
672
251
351
672
251
351
672
251
351
672
...
...
...
116 (161-110)
Type DB & DX
Hp/Triple Reduction

HSS
rpm
Nominal
Ratio
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
1170
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
Auxiliary
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
M1130
...
...
...
...
...
...
76
102
151
66
102
151
63
90
151
62
86
131
62
82
126
54
78
126
51
76
129
51
76
129
51
76
129
51
76
129
51
76
129
51
76
129
51
76
129
31
42
76
31
42
76
31
42
76
31
42
76
31
42
76
31
42
76
31
42
76
M1140
...
...
...
...
...
...
87
134
216
83
128
201
79
126
179
76
126
178
76
110
178
76
105
153
79
110
216
79
110
216
79
110
216
79
110
216
79
110
216
79
110
216
79
110
216
51
76
132
51
76
132
51
76
132
51
76
132
51
76
132
51
76
132
51
76
132
M1150
...
...
...
...
...
...
105
178
251
101
155
251
102
151
218
102
151
216
88
134
216
84
128
201
111
154
301
111
154
301
111
154
301
111
154
301
111
154
301
111
154
301
111
154
301
76
103
216
76
103
216
76
103
216
76
103
216
76
103
216
76
103
216
76
103
216
M1160
...
...
...
...
...
...
131
201
301
126
178
301
126
178
301
126
159
269
110
152
269
105
151
251
126
178
351
126
178
351
126
178
351
126
178
351
126
178
351
126
178
351
126
178
351
89
126
251
89
126
251
89
126
251
89
126
251
89
126
251
89
126
251
89
126
251
DRIVE SIZE
M1170
...
...
...
...
...
...
157
224
401
151
216
361
151
216
351
151
201
351
130
201
336
126
178
301
151
216
423
151
216
423
151
216
423
151
216
423
151
216
423
151
216
423
151
216
423
110
153
301
110
153
301
110
153
301
110
153
301
110
153
301
110
153
301
110
153
301
M1180
...
...
...
...
...
...
216
336
537
201
301
537
201
301
501
178
301
477
178
269
451
178
269
423
178
269
501
178
269
501
178
269
501
178
269
501
178
269
501
178
269
501
178
269
501
151
201
401
151
201
401
151
201
401
151
201
401
151
201
401
151
201
401
151
201
401
M1190
...
...
...
...
...
...
216
351
601
201
351
601
201
351
601
201
336
537
201
301
537
201
301
501
216
301
537
216
301
537
216
301
537
216
301
537
216
301
537
216
301
537
216
301
537
178
251
477
178
251
477
178
251
477
178
251
477
178
251
477
178
251
477
178
251
477
M1200
102
363
752
108
401
751
126
401
752
151
401
701
151
401
701
178
401
701
351
541
901
269
401
751
269
401
751
269
401
751
269
401
751
269
401
751
269
401
751
251
336
602
251
336
602
251
336
602
251
336
602
251
336
602
251
336
602
251
336
602
...
...
...
...
...
...
M1210
...
...
...
102
363
752
108
401
751
126
401
752
151
401
701
151
401
701
178
401
701
351
541
901
269
401
751
269
401
751
269
401
751
269
401
751
269
401
751
269
401
751
251
336
602
251
336
602
251
336
602
251
336
602
251
336
602
251
336
602
251
336
602
...
...
...
(161-110) 117
Type DB & DX
Hp/Triple Reduction

HSS
rpm
Nominal
Ratio
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
970
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
Auxiliary
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
M1130
...
...
...
...
...
...
64
88
151
62
83
134
62
79
128
62
76
126
53
76
126
51
76
110
51
62
126
51
62
126
51
62
126
51
62
126
51
62
126
51
62
126
51
62
126
26
35
66
26
35
66
26
35
66
26
35
66
26
35
66
26
35
66
26
35
66
M1140
...
...
...
...
...
...
83
126
201
79
113
178
76
107
178
76
102
157
67
102
151
64
102
151
76
102
201
76
102
201
76
102
201
76
102
201
76
102
201
76
102
201
76
102
201
51
63
126
51
63
126
51
63
126
51
63
126
51
63
126
51
63
126
51
63
126
M1150
...
...
...
...
...
...
102
151
223
102
151
216
102
131
216
88
126
216
84
126
201
80
126
178
107
151
301
107
151
301
107
151
301
107
151
301
107
151
301
107
151
301
107
151
301
76
102
181
76
102
181
76
102
181
76
102
181
76
102
181
76
102
181
76
102
181
M1160
...
...
...
...
...
...
126
178
301
126
159
269
126
153
269
109
151
269
105
151
251
102
151
222
126
178
336
126
178
336
126
178
336
126
178
336
126
178
336
126
178
336
126
178
336
86
126
219
86
126
219
86
126
219
86
126
219
86
126
219
86
126
219
86
126
219
DRIVE SIZE
M1170
...
...
...
...
...
...
153
216
355
151
216
351
151
201
351
134
179
336
128
178
301
126
178
301
151
201
401
151
201
401
151
201
401
151
201
401
151
201
401
151
201
401
151
201
401
107
151
301
107
151
301
107
151
301
107
151
301
107
151
301
107
151
301
107
151
301
M1180
...
...
...
...
...
...
216
301
537
201
301
501
201
269
477
178
269
451
178
251
423
178
251
401
178
251
477
178
251
477
178
251
477
178
251
477
178
251
477
178
251
477
178
251
477
151
181
351
151
181
351
151
181
351
151
181
351
151
181
351
151
181
351
151
181
351
M1190
...
...
...
...
...
...
216
351
601
216
336
601
216
302
537
216
301
537
201
301
501
201
270
501
216
269
537
216
269
537
216
269
537
216
269
537
216
269
537
216
269
537
216
269
537
178
216
451
178
216
451
178
216
451
178
216
451
178
216
451
178
216
451
178
216
451
M1200
201
423
801
216
423
801
216
423
752
216
401
752
216
401
701
216
401
701
224
354
672
269
351
701
269
351
701
269
351
701
269
351
701
269
351
701
269
351
701
226
301
601
226
301
601
226
301
601
226
301
601
226
301
601
226
301
601
226
301
601
...
...
...
...
...
...
M1210
...
...
...
201
423
801
216
423
801
216
423
752
216
401
752
216
401
701
216
401
701
224
354
672
269
351
701
269
351
701
269
351
701
269
351
701
269
351
701
269
351
701
226
301
601
226
301
601
226
301
601
226
301
601
226
301
601
226
301
601
226
301
601
...
...
...
118 (161-110)
Type DB & DX
Hp/Triple Reduction

HSS
rpm
Nominal
Ratio
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
870
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
Auxiliary
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
M1130
...
...
...
...
...
...
62
82
135
62
78
129
62
76
126
53
76
126
51
76
111
51
65
106
51
62
126
51
62
126
51
62
126
51
62
126
51
62
126
51
62
126
51
62
126
26
33
64
26
33
64
26
33
64
26
33
64
26
33
64
26
33
64
26
33
64
M1140
...
...
...
...
...
...
81
111
178
77
105
178
76
102
159
76
102
151
65
90
151
62
85
135
76
102
201
76
102
201
76
102
201
76
102
201
76
102
201
76
102
201
76
102
201
51
62
126
51
62
126
51
62
126
51
62
126
51
62
126
51
62
126
51
62
126
M1150
...
...
...
...
...
...
102
135
216
102
129
216
90
126
216
86
126
201
82
112
179
78
107
178
105
151
269
105
151
269
105
151
269
105
151
269
105
151
269
105
151
269
105
151
269
76
102
178
76
102
178
76
102
178
76
102
178
76
102
178
76
102
178
76
102
178
M1160
...
...
...
...
...
...
126
157
270
126
152
269
111
151
269
106
151
251
102
151
226
102
126
216
126
157
301
126
157
301
126
157
301
126
157
301
126
157
301
126
157
301
126
157
301
85
111
216
85
111
216
85
111
216
85
111
216
85
111
216
85
111
216
85
111
216
DRIVE SIZE
M1170
...
...
...
...
...
...
151
216
351
151
201
351
151
179
336
133
178
301
126
178
301
126
155
271
151
201
353
151
201
353
151
201
353
151
201
353
151
201
353
151
201
353
151
201
353
106
151
269
106
151
269
106
151
269
106
151
269
106
151
269
106
151
269
106
151
269
M1180
...
...
...
...
...
...
216
301
501
201
269
454
201
269
477
178
251
451
178
251
401
178
219
401
178
223
451
178
223
451
178
223
451
178
223
451
178
223
451
178
223
451
178
223
451
135
178
351
135
178
351
135
178
351
135
178
351
135
178
351
135
178
351
135
178
351
M1190
...
...
...
...
...
...
223
336
601
216
304
541
216
301
537
216
301
537
216
271
501
201
268
451
216
269
537
216
269
537
216
269
537
216
269
537
216
269
537
216
269
537
216
269
537
160
216
423
160
216
423
160
216
423
160
216
423
160
216
423
160
216
423
160
216
423
M1200
251
451
846
251
423
801
251
423
801
251
423
752
251
401
701
251
401
701
251
351
701
269
351
701
269
351
701
269
351
701
269
351
701
269
351
701
269
351
701
223
301
601
223
301
601
223
301
601
223
301
601
223
301
601
223
301
601
223
301
601
...
...
...
...
...
...
M1210
...
...
...
251
451
846
251
423
801
251
423
801
251
423
752
251
401
701
251
401
701
251
351
701
269
351
701
269
351
701
269
351
701
269
351
701
269
351
701
269
351
701
223
301
601
223
301
601
223
301
601
223
301
601
223
301
601
223
301
601
223
301
601
...
...
...
(161-110) 119
Type DB Right Angle Shaft - Sizes M1220-M1250
Hp/Triple Reduction

HSS
rpm
Nominal
Ratio
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
1750
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
Auxiliary
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
DRIVE SIZE
M1220
401
846
601
901
801
952
601
1001
672
1001
119
701
1001
201
753
1074
301
801
1074
105
601
901
112
601
846
126
537
846
301
752
1001
301
701
953
269
672
901
269
601
846
269
601
801
251
544
752
218
537
701
216
501
701
...
...
...
M1230
...
...
...
401
846
601
901
801
952
601
1001
672
1001
119
701
1001
201
753
1074
301
801
1074
105
601
901
112
601
846
126
537
846
301
752
1001
301
701
953
269
672
901
269
601
846
269
601
801
251
544
752
218
537
701
216
501
701
M1240
477
336
901
477
1001
601
1074
672
1074
82
752
1207
108
752
1096
135
752
1074
178
752
1074
301
672
351
846
1251
351
846
1090
336
801
1074
303
752
1074
301
701
1001
301
701
953
301
672
901
269
601
846
...
...
...
M1250
...
...
...
477
336
901
477
1001
601
1074
672
1074
82
752
1207
108
752
1096
135
752
1074
178
752
1074
301
672
351
846
1251
351
846
1090
336
801
1074
303
752
1074
301
701
1001
301
701
953
301
672
901
269
601
846
120 (161-110)
Hp/Triple Reduction

HSS
rpm
Nominal
Ratio
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
1430
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
Auxiliary
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
DRIVE SIZE
M1220
601
1074
81
651
1074
151
672
1074
216
701
1074
251
701
1074
301
752
1074
336
752
1074
360
801
1074
251
601
953
216
601
901
216
537
846
351
701
1001
351
672
953
336
601
901
301
601
846
301
537
801
269
537
752
269
501
701
251
477
701
...
...
...
M1230
...
...
...
601
1074
81
651
1074
151
672
1074
216
701
1074
251
701
1074
301
752
1074
336
752
1074
360
801
1074
251
601
953
216
601
901
216
537
846
351
701
1001
351
672
953
336
601
901
301
601
846
301
537
801
269
537
752
269
501
701
251
477
701
M1240
110
801
355
1001
601
1208
107
701
1342
216
801
1342
269
801
1342
336
846
1342
351
846
1342
351
801
1251
351
801
1251
76
537
1001
423
801
1208
401
801
1083
423
752
1074
363
701
1074
351
701
1001
336
601
953
304
601
901
301
601
846
...
...
...
M1250
...
...
...
110
801
355
1001
601
1208
107
701
1342
216
801
1342
269
801
1342
336
846
1342
351
846
1342
351
801
1251
351
801
1251
76
537
1001
423
801
1208
401
801
1083
423
752
1074
363
701
1074
351
701
1001
336
601
953
304
601
901
301
601
846
(161-110) 121
Hp/Triple Reduction

HSS
rpm
Nominal
Ratio
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
1170
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
Auxiliary
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
DRIVE SIZE
M1220
269
672
1208
301
701
1208
336
701
1208
351
701
1208
360
701
1208
401
701
1083
423
701
1074
423
701
1074
301
601
953
301
537
953
301
537
901
423
608
953
363
601
901
351
538
846
336
537
801
301
501
752
301
501
701
269
451
701
269
423
672
...
...
...
M1230
...
...
...
269
672
1208
301
701
1208
336
701
1208
351
701
1208
360
701
1208
401
701
1083
423
701
1074
423
701
1074
301
601
953
301
537
953
301
537
901
423
608
953
363
601
901
351
538
846
336
537
801
301
501
752
301
501
701
269
451
701
269
423
672
M1240
536
1251
201
701
1342
351
801
1501
423
846
1501
451
846
1501
477
846
1356
501
846
1342
501
846
1342
537
846
1342
336
672
1074
301
601
1074
501
752
1208
477
752
1074
451
701
1074
423
701
1074
401
601
1001
358
601
953
351
539
901
351
537
846
...
...
...
M1250
...
...
...
536
1251
201
701
1342
351
801
1501
423
846
1501
451
846
1501
477
846
1356
501
846
1342
501
846
1342
537
846
1342
336
672
1074
301
601
1074
501
752
1208
477
752
1074
451
701
1074
423
701
1074
401
601
1001
358
601
953
351
539
901
351
537
846
122 (161-110)
Hp/Triple Reduction

HSS
rpm
Nominal
Ratio
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
970
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
Auxiliary
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
DRIVE SIZE
M1220
423
752
1342
423
752
1251
451
701
1251
451
701
1208
451
701
1208
451
701
1074
423
672
1074
351
601
1001
351
537
953
351
537
901
336
537
901
351
537
901
351
537
846
351
501
801
336
477
752
301
451
701
301
423
701
269
423
672
269
401
601
...
...
...
M1230
...
...
...
423
752
1342
423
752
1251
451
701
1251
451
701
1208
451
701
1208
451
701
1074
423
672
1074
351
601
1001
351
537
953
351
537
901
336
537
901
351
537
901
351
537
846
351
501
801
336
477
752
301
451
701
301
423
701
269
423
672
269
401
601
M1240
351
752
1501
451
801
1501
551
901
1501
537
901
1501
537
901
1501
537
846
1501
537
846
1342
537
846
1342
501
752
1251
423
672
1079
401
601
1074
501
701
1074
477
701
1074
451
672
1074
154
601
1001
423
601
953
401
537
901
354
637
846
351
501
846
...
...
...
M1250
...
...
...
351
752
1501
451
801
1501
551
901
1501
537
901
1501
537
901
1501
537
846
1501
537
846
1342
537
846
1342
501
752
1251
423
672
1079
401
601
1074
501
701
1074
477
701
1074
451
672
1074
154
601
1001
423
601
953
401
537
901
354
637
846
351
501
846
(161-110) 123
Hp/Triple Reduction

HSS
rpm
Nominal
Ratio
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
870
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
Auxiliary
Cooling
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
None
Shaft Fan
Electric Fan
DRIVE SIZE
M1220
451
752
1342
451
701
1251
451
701
1251
451
701
1208
451
672
1074
451
672
1074
423
601
1074
401
601
1001
351
537
953
351
537
901
351
501
846
351
537
846
351
501
801
336
477
801
301
451
752
301
423
701
271
423
672
269
401
601
269
351
601
...
...
...
M1230
...
...
...
451
752
1342
451
701
1251
451
701
1251
451
701
1208
451
672
1074
451
672
1074
423
601
1074
401
601
1001
351
537
953
351
537
901
351
501
846
351
537
846
351
501
801
336
477
801
301
451
752
301
423
701
271
423
672
269
401
601
269
351
601
M1240
451
752
1501
501
846
1501
538
846
1501
543
846
1501
601
846
1501
544
846
1342
541
846
1342
536
752
1342
501
701
1251
451
672
1074
423
601
1074
501
672
1074
448
672
1074
451
601
1001
423
601
953
423
536
1001
401
536
846
351
501
846
351
501
801
...
...
...
M1250
...
...
...
451
752
1501
501
846
1501
538
846
1501
543
846
1501
601
846
1501
544
846
1342
541
846
1342
536
752
1342
501
701
1251
451
672
1074
423
601
1074
501
672
1074
448
672
1074
451
601
1001
423
601
953
423
536
1001
401
536
846
351
501
846
351
501
801
124 (161-110)
Type DB Alignment Free Drive - Sizes M1140-M1230
Thermal Rating Multiplier
Multiplier For Alignment Free Drive

With VFD/Close Coupling
Multiplier For Alignment Free Drive

With Fluid Coupling
DRIVE
SIZE
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
M1220
M1230
Fluid Coupling/Bell Size

1420HFDD
1.25
1.25
1.25
1.20
1.15
1.15
...
...
...
...
1480HFDD
...
1.30
1.30
1.25
1.20
1.20
1.00
1.00
...
...
1584HFDD
...
...
...
1.30
1.25
1.25
1.15
1.15
1.15
1.15
1660HFDD
...
...
...
...
1.30
1.30
1.20
1.20
1.15
1.15
To determine thermal rating of Drive One Alignment Free Drives, look up the
thermal rating for the Type DB right angle shaft with shaft fan and multiply the
rating by the value indicated in the table.
DRIVE
SIZE
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
M1220
M1230
Motor Frame Size

All Sizes
(NEMA & IEC)
NEMA 447T/IEC 280M

and Smaller Motors
NEMA 449T/IEC 315S

and Larger Motors
1.25
1.25
1.25
...
...
...
1.15
1.15
1.15
1.15
...
...
...
1.20
1.15
1.15
...
...
...
...
...
...
...
1.30
1.25
1.25
...
...
...
...
To determine thermal rating of Drive One Alignment Free Drives, look up the
thermal rating for the Type DB right angle shaft with shaft fan and multiply the
rating by the value indicated in the table.
(161-110) 125
Exact Ratios/Right Angle Shaft Drives

Double Reduction - Type DBL
DRIVE SIZE
Nominal
Ratio
M1130
2.879
3.258
3.607
3.999
4.524
5.074
5.695
6.307
6.991
7.910
8.870
10.000
11.138
12.656
13.945
15.469
17.820
20.250
22.313
24.750
2.80
3.15
3.55
4.00
4.50
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
M1140
2.895
3.190
3.656
4.048
4.497
5.097
5.609
6.427
7.115
7.906
8.960
10.018
11.498
12.746
14.063
16.028
18.364
20.356
22.460
25.598
M1150
2.934
3.268
3.593
4.075
4.539
5.113
5.735
6.306
7.153
7.966
6.975
9.882
11.186
12.800
14.294
15.882
17.647
20.194
22.551
25.057
M1160
2.925
3.262
3.606
4.048
4.493
5.048
5.649
6.244
7.009
7.781
8.741
9.982
11.269
12.675
13.754
15.403
18.021
20.268
21.994
24.631
M1170
2.936
3.222
3.668
4.121
4.617
5.098
5.578
6.351
7.136
7.994
8.827
10.035
11.205
12.688
14.324
15.956
17.616
19.949
22.520
25.086
M1180
2.850
3.268
3.656
4.048
4.438
5.135
5.735
6.417
7.104
7.789
9.014
10.118
11.166
12.706
14.275
15.604
17.616
20.045
22.520
24.617
M1190
2.860
3.170
3.633
4.022
4.451
5.124
5.564
6.376
7.059
7.812
8.993
9.939
11.407
12.522
13.969
15.779
17.996
19.755
22.038
24.893
M1200
2.896
3.138
3.534
4.009
4.483
5.014
5.448
6.134
6.959
7.782
8.704
9.732
10.948
12.261
13.678
15.279
17.490
19.587
21.851
24.408
Triple Reduction - Type DB(All Sizes) & DX(Sizes M1130-M1210)

Nominal
Ratio
8.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
M1130
...
...
...
...
...
14.12
15.98
17.69
19.61
22.19
24.89
27.93
30.93
34.29
38.80
43.51
49.05
54.63
62.08
68.40
75.87
87.40
99.32
109.4
121.4
126 (161-110)
M1140
...
...
...
...
...
14.63
16.12
18.47
20.45
22.72
25.75
28.34
32.47
35.95
39.95
45.27
50.62
58.10
64.40
71.06
80.99
92.79
102.9
113.5
129.3
M1150
...
...
...
...
...
14.82
16.51
18.15
20.59
22.93
25.84
28.98
31.86
36.14
40.25
45.35
49.93
56.52
64.67
72.22
80.25
89.16
102.0
113.9
126.6
M1160
...
...
...
...
...
14.47
16.14
17.84
20.03
22.23
24.97
27.95
30.89
34.68
38.49
43.25
49.39
55.75
62.71
68.05
76.21
89.15
100.3
108.8
121.9
M1170
...
...
...
...
...
14.52
15.94
18.15
20.39
22.84
25.22
27.60
31.42
35.30
39.55
43.67
49.65
55.43
62.77
70.87
78.94
87.15
98.69
111.4
124.1
M1180
...
...
...
...
...
14.41
16.52
18.48
20.46
22.44
25.96
29.00
32.44
35.92
39.38
45.57
51.15
56.45
64.24
72.17
78.89
89.06
101.3
113.9
124.5
DRIVE SIZE
M1190
...
...
...
...
...
14.06
15.59
17.86
19.77
21.88
25.19
27.36
31.35
34.71
38.41
44.22
48.87
56.08
61.57
68.68
77.58
88.48
97.13
108.4
122.4
M1200
...
...
...
12.27
13.30
14.98
16.99
19.00
21.25
23.09
26.00
29.49
32.98
36.89
41.24
46.40
51.96
57.97
64.75
74.12
83.01
92.61
103.4
...
...
M1210
...
...
...
...
13.79
14.94
16.83
19.09
21.35
23.87
25.94
29.21
33.14
37.06
41.45
46.34
52.13
58.39
65.13
72.76
83.29
93.27
104.1
116.2
...
M1220
8.005
9.017
10.16
11.59
12.96
14.59
16.10
17.97
20.24
22.66
25.39
28.91
31.90
35.62
40.12
44.91
50.33
57.60
64.17
...
...
...
...
...
...
M1230
...
8.884
10.01
11.28
12.86
14.38
16.19
17.86
19.95
22.47
25.15
28.18
32.09
35.41
39.53
44.53
49.85
55.86
63.93
71.22
...
...
...
...
...
M1240
8.009
8.905
10.18
11.39
12.82
14.17
15.94
17.80
19.99
22.63
25.59
28.12
31.62
35.32
39.67
44.90
50.77
56.90
62.39
...
...
...
...
...
...
M1250
...
8.907
9.903
11.32
12.67
14.25
15.76
17.72
19.80
22.24
25.17
28.46
31.28
35.16
39.28
44.12
49.93
56.47
63.28
69.39
...
...
...
...
...
WR2/Right Angle Shaft Drives - Type DBL

Nominal
Ratios
2.80
3.15
3.55
4.00
4.50
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
DRIVE SIZE
M1130
30.71
29.42
28.33
27.39
26.45
25.84
13.46
13.11
12.80
12.49
12.29
11.77
11.58
11.39
11.26
11.13
4.582
4.507
4.456
4.408
M1140
88.17
85.83
83.00
81.41
79.65
77.83
39.54
38.62
38.10
37.54
36.95
36.48
35.89
35.53
35.23
34.89
11.38
11.24
11.12
10.99
M1150
166.8
160.8
156.3
151.4
147.5
144.0
72.48
71.02
69.41
68.14
67.02
63.50
62.30
61.21
60.61
60.01
20.40
19.97
19.72
19.48
M1160
236.9
227.0
219.0
212.3
204.6
199.8
127.8
125.1
122.9
120.3
118.7
112.7
110.7
109.1
108.2
107.0
31.67
31.05
30.69
30.21
M1170
491.5
475.0
454.7
441.6
425.8
419.0
214.7
208.0
203.6
198.3
196.0
185.5
181.9
178.7
176.0
173.9
67.98
66.69
65.58
64.72
M1180
930.4
877.8
840.1
810.7
785.9
751.8
415.3
403.0
393.5
385.4
374.4
360.5
354.9
348.8
343.5
339.9
134.0
131.6
129.4
128.0
M1190
939.4
860.2
776.6
721.0
671.6
631.4
693.4
666.3
648.3
632.2
619.2
609.6
592.4
583.2
573.2
563.9
214.7
211.0
207.0
203.3
M1200
3562
3455
3315
3209
3092
2992
1632
1586
1551
1512
1479
1443
1419
1400
1381
1365
574.8
567.6
560.3
553.8
++ Values in these tables are approximate. Where accurate figures are required, or for ratios not shown, consult the Factory. WR2 referred to drive low speed shaft equals (exact total
ratio)2 times WR2 referred to high speed shaft.
WR2/Right Angle Shaft Drives
Type DB(All Sizes) & DX(Sizes M1130-M1210)

Nominal
Ratios
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
M1130
...
...
...
...
...
38.93
35.83
33.56
31.65
29.78
28.49
15.56
14.82
14.20
13.58
13.16
12.45
12.13
11.81
11.61
11.42
4.797
4.673
4.592
4.519
M1140
...
...
...
...
...
103.0
98.00
92.26
88.97
85.77
82.60
43.47
41.62
40.55
39.52
38.49
37.71
36.82
36.29
35.86
35.37
11.75
11.54
11.37
11.18
M1150
...
...
...
...
...
189.4
179.0
171.4
163.0
156.9
151.4
78.37
75.90
73.26
71.20
69.43
65.48
63.85
62.39
61.55
60.78
21.03
20.44
20.10
19.79
M1160
...
...
...
...
...
281.1
262.5
248.1
235.3
223.3
214.7
119.2
114.4
110.2
106.2
103.3
96.09
93.32
91.13
89.84
88.20
32.83
31.97
31.47
30.83
M1170
...
...
...
...
...
568.3
538.7
502.5
480.5
456.8
444.5
236.0
223.9
216.6
208.7
204.6
192.0
187.2
182.8
179.2
176.5
70.10
68.34
66.89
65.77
M1180
...
...
...
...
...
1069
982.9
924.1
879.2
842.9
794.4
449.4
430.3
415.7
403.9
388.2
371.4
363.9
355.8
349.0
344.5
137.6
134.4
131.6
129.8
DRIVE SIZE
M1190
...
...
...
...
...
1213
1083
946.2
859.4
784.6
716.6
765.7
721.4
693.2
668.9
646.8
632.3
609.6
597.5
584.7
572.8
221.6
216.8
211.6
206.9
M1200
...
...
...
4046
3867
3640
3462
3294
3153
1769
1694
1635
1579
1532
1486
1452
1427
1403
1382
588.1
578.1
568.8
560.6
...
...
M1210
...
...
...
...
4108
3919
3681
3494
3319
3174
1787
1708
1645
1578
1539
1491
1457
1431
1406
1385
589.7
579.5
569.8
561.5
...
M1220
18020
16647
15522
14521
13823
13512
13034
12557
12211
11864
11597
6215
6093
5971
5883
5795
5727
5656
5608
...
...
...
...
...
...
M1230
...
18965
17392
16108
14972
14183
13797
13268
12744
12358
11982
11691
6287
6152
6019
5921
5825
5751
5674
5623
...
...
...
...
...
M1240
36698
34000
31233
29321
27677
27250
26063
25198
24225
23454
22797
11173
10872
10652
10405
10209
10042
9912
9820
...
...
...
...
...
...
M1250
...
38937
35811
32620
30428
28551
27965
26629
25652
24584
23734
23017
11355
11015
10767
10496
10280
10098
9956
9857
...
...
...
...
...
++ Values in these tables are approximate. Where accurate figures are required, or for ratios not shown, consult the Factory. WR2 referred to drive low speed shaft equals (exact total
ratio)2 times WR2 referred to high speed shaft.
(161-110) 127
Type DBL2 Double Reduction

N
N
X
B
USABLE
LENGTH
SE (TAPPED HOLE)
SF (DEPTH )
SB S
SC
SA
T
TB
TA
A
USABLE
LENGTH
TE (TAPPED HOLE)
TF (DEPTH )
TC
T
L
M
Q
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
EE
CC
RA
AA
E
8-HOLES
U D IA. FOR
GRADE 5 BOLT
BOTH
ENDS
CC
BB
EE
GA
GB
DRIVE
SIZE
Ratios
2.80-16.0
18.0-25.0
2.80-16.0
M1140
18.0-25.0
2.80-16.0
M1150
18.0-25.0
2.80-16.0
M1160
18.0-25.0
M1130
DRIVE
SIZE
M1130
M1140
M1150
M1160
Ratios
2.80-16.0
18.0-25.0
2.80-16.0
18.0-25.0
2.80-16.0
18.0-25.0
2.80-16.0
18.0-25.0
A
3.94
2.76
4.33
3.54
5.91
3.94
5.91
5.51
AA
BB
CC
DD
EE
GA
GB
9.84
2.64
3.43
3.15
15.83
0.94
16.69
1.18
4.41
7.87
3.94
7.87
3.54
26.14 11.42
4.92
12.44
2.64
3.07
3.54
17.56
1.10
18.58
1.18
4.57
9.06
4.72
9.06
3.94
29.61 13.39
5.91
12.99
3.54
3.94
3.94
19.69
1.10
20.87
1.18
4.76
10.63
5.91
9.96
4.96
33.66 14.57
6.50
14.57
3.54
3.74
3.94
21.26
1.10
22.05
1.18
4.92
11.71
6.50
10.93
5.41
36.61 15.94
6.99
Low Speed Shaft
High Speed Shaft
SA
SB
SC
SE
SF
1.6535 k6
1.77
0.47
2.48
M16
1.42
2.1654 m6
2.32
0.63
2.48
M20
1.65
2.7559 m6
2.93
0.79
3.54
M20
1.65
2.9528 m6
3.15
0.79
3.54
M20
1.65
TA
TB
TC
TE
TF
1.5748 k6
0.9843 j6
1.7717 k6
1.1811 j6
1.9685 k6
1.3780 k6
2.1654 m6
1.5748 k6
1.69
1.10
1.91
1.30
2.11
1.50
2.32
1.69
0.47
0.31
0.55
0.31
0.55
0.39
0.63
0.47
3.94
2.76
4.33
3.54
5.51
3.94
5.91
5.51
M16
M10
M16
M10
M16
M12
M20
M16
1.42
0.87
1.42
0.87
1.42
1.10
1.65
1.42
22.64
21.46
24.78
10.71
23.94
27.17
12.20
25.35
30.28
12.89
29.88
9.72
0.57
8.35
0.73
9.29
0.73
10.43
0.94
11.02
W
38.46
37.28
42.32
41.50
46.85
45.04
51.54
51.14
RA
1.57
3.23
0.98
1.97
3.43
1.18
1.97
3.41
1.18
1.97
3.35
1.18
Approx
Wt
lb
6.10
694
7.09
996
7.68
1235
8.37
1418
128 (161-110)
Type DBL2 Double Reduction

N
N
X
B
USABLE
LENGTH
SE (TAPPED HOLE)
SF (DEPTH )
SB S
SC
SA
T
TB
TA
A
USABLE
LENGTH
TE (TAPPED HOLE)
TF (DEPTH )
TC
T
L
M
Q
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
EE
CC
RA
AA
E
8-HOLES
U D IA. FOR
GRADE 5 BOLT
BOTH
ENDS
CC
BB
EE
GA
GB
DRIVE
SIZE
Ratios
2.80-16.0
18.0-25.0
2.80-16.0
M1180
18.0-25.0
2.80-16.0
M1190
18.0-25.0
2.80-16.0
M1200
18.0-25.0
M1170
DRIVE
SIZE
M1170
M1180
M1190
M1200
Ratios
2.80-16.0
18.0-25.0
2.80-16.0
18.0-25.0
2.80-16.0
18.0-25.0
2.80-16.0
18.0-25.0
A
6.10
5.91
7.09
6.30
7.68
6.89
9.45
9.45
AA
BB
CC
DD
EE
GA
GB
16.93
4.53
3.94
3.94
23.23
1.38
24.80
1.18
5.51
13.78
5.91
12.60
5.12
40.94 16.14
7.09
18.50
4.33
3.94
3.94
26.38
1.38
26.38
1.18
5.51
16.14
7.09
14.17
6.69
46.06 18.50
8.27
21.26
5.91
4.13
4.33
29.33
1.65
29.53
1.18
5.91
18.31
7.09
17.13
6.30
51.97 20.08
8.46
25.20
7.28
5.12
5.91
34.84
1.65
35.43
1.57
6.30
21.46
7.87
22.05
6.50
60.83 22.44
9.65
Low Speed Shaft
High Speed Shaft
SA
SB
SC
SE
SF
3.1496 m6
3.35
0.87
3.94
M20
1.65
3.7402 m6
3.94
0.98
3.94
M24
1.97
3.9370 m6
4.17
1.10
4.92
M24
1.97
5.5118 m6
5.83
14.2
6.30
M24
1.97
31.38
31.14
34.65
15.16
33.86
37.60
17.42
36.81
43.90
19.88
43.90
1.65
1.42
0.94
12.40
M20
1.65
1.10
13.19
M20
1.65
1.38
14.76
M24
M20
1.97
1.65
1.38
17.72
TA
TB
TC
TE
TF
2.1654 m6
1.9685 k6
2.7559 m6
2.1654 m6
3.1496 m6
2.5591 m6
4.3307 m6
2.9528 m6
2.32
2.11
2.93
2.32
3.35
2.72
4.57
3.15
0.63
0.55
0.79
0.63
0.87
0.71
1.10
0.79
5.91
5.51
7.09
6.30
7.09
6.30
M20
M16
13.98
8.66
W
54.61
54.37
61.02
60.24
66.93
66.14
78.74
78.74
RA
1.97
3.54
1.18
1.97
3.74
1.18
3.35
4.33
1.18
3.35
4.33
1.38
Approx
Wt
lb
8.46
1889
9.65
2740
10.43
3333
11.61
5088
(161-110) 129
Type DBC3 Triple Reduction

N
B
USABLE
LENGTH
N
X
SC
M
SE (TAPPED HOLE)
SF (DEPTH )
SB S
SA
T
TB
TA
TE (TAPPED HOLE)
TF (DEPTH )
A
USABLE
LENGTH
TC
T
W
L
M
Q
M
Q
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
RA
CC
AA
8-HOLES
U D IA. FOR
GRADE 5 BOLT
BOTH
ENDS
CC
BB
EE
GA
GB
DRIVE
SIZE
M1130
M1140
M1150
M1160
DRIVE
SIZE
M1130
M1140
M1150
M1160
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
3.94
2.76
4.33
3.54
5.91
3.94
5.91
5.51
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
AA
BB
CC
DD
EE
GB
9.84
4.72
3.43
3.15
8.35
0.94
16.69
1.18
4.41
7.87
3.94
7.87
3.94
26.14 11.42
4.92
11.61
12.44
6.10
3.07
3.54
9.29
1.10
18.58
1.18
4.57
9.06
4.72
9.06
4.72
29.61 13.39
5.91
13.98
12.99
6.10
3.94
3.94
10.43
1.10
20.87
1.18
4.76
10.63
5.91
9.96
5.67
33.66 14.57
6.50
14.69
14.57
7.87
3.74
3.94
11.02
1.10
22.05
1.18
4.92
11.71
6.50
10.93
6.10
36.61 15.94
6.99
16.61
Low Speed Shaft

S
GA
SA
SB
SC
High Speed Shaft

SE
SF
3.5433 m6
3.74
0.98
4.33
M24
1.97
4.3307 m6
4.57
1.10
5.51
M24
1.97
4.7244 m6
5.00
1.26
5.51
M24
1.97
5.1181 m6
5.39
1.26
7.09
M24
1.97
1.5748 k6
0.9843 j6
1.7717 k6
1.1811 j6
1.9685 k6
1.3780 k6
2.1654 m6
1.5748 k6
TA
TB
TC
TE
TF
1.69
1.10
1.91
1.30
2.11
1.50
2.32
1.69
0.47
0.31
0.55
0.31
0.55
0.39
0.63
0.47
3.94
2.76
4.33
3.54
5.51
3.94
5.91
5.51
M16
M10
M16
M10
M16
M12
M20
M16
1.42
0.87
1.42
0.87
1.42
1.10
1.65
1.42
0.57
8.35
0.73
9.29
0.73
10.43
0.94
11.02
O
30.12
28.94
33.06
32.21
36.40
34.59
40.50
40.08
W
38.47
37.28
42.35
41.50
46.83
45.02
51.52
51.11
RA
1.57
3.23
0.98
1.97
3.43
1.18
1.97
3.41
1.18
1.97
3.35
1.18
Approx
Wt
lb
6.10
827
7.09
1186
7.68
1470
8.37
1687
130 (161-110)

N
B
USABLE
LENGTH
N
X
SC
M
SE (TAPPED HOLE)
SF (DEPTH )
SB S
SA
T
TB
TA
TE (TAPPED HOLE)
TF (DEPTH )
A
USABLE
LENGTH
TC
T
W
L
M
Q
M
Q
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
RA
CC
AA
8-HOLES
U D IA. FOR
GRADE 5 BOLT
BOTH
ENDS
CC
BB
EE
GA
GB
DRIVE
SIZE
Ratios
M1200
M1210
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
11.2-100.0
12.5-112.0
6.10
5.91
7.09
6.30
7.68
6.89
9.45
9.45
DRIVE
SIZE
Ratios
M1170
M1180
M1190
M1170
M1180
M1190
M1200
M1210
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
11.2-63.0
71.0-100.0
12.5-71.0
80.0-112.0
6.30 40.94 16.14
7.09
16.93
14.17
7.68 46.06 18.50
8.27
17.91
7.09
17.13
8.86 51.97 20.08
8.46
20.28
7.87
7.87
22.05 12.40 60.83 22.44

22.05 11.42 60.83 22.44
9.65
9.65
23.03
23.03
BB
CC
DD
EE
GA
GB
16.93
7.48
3.94
3.94
11.81
1.38
24.80
1.18
5.51
13.78
5.91
12.60
18.50
7.48
3.94
3.94
13.19
1.38
26.38
1.18
5.51
16.14
7.09
21.26
8.86
4.13
4.33
14.76
1.65
29.53
1.18
5.91
18.31
25.20 10.63
25.20 10.63
5.12
5.12
5.91
5.91
18.70
17.72
1.65
1.65
35.43
35.43
1.57
1.57
6.30
6.30
21.46
21.46
Low Speed Shaft

S
AA
SA
SB
SC
High Speed Shaft

SE
SF
5.1181 m6
5.39
1.26
7.09
M24
1.97
5.9055 m6
6.22
1.42
7.09
M24
1.97
6.6929 m6
7.05
1.57
7.87
M24
1.97
7.4803 m6 7.874
1.77
9.84
M24
1.97
7.8740m6 8.268
1.77
9.84
M24
1.97
2.1654 m6
1.9685 k6
2.7559 m6
2.1654 m6
3.1496 m6
2.5591 m6
4.3307 m6
2.9528 m6
4.3307 m6
2.9528 m6
TA
TB
TC
TE
TF
2.32
2.11
2.93
2.32
3.35
2.72
4.57
3.15
4.57
3.15
0.63
0.55
0.79
0.63
0.87
0.71
1.10
0.79
1.10
0.79
5.91
5.51
7.09
6.30
7.09
6.30
M20
M16
M20
M20
M20
M20
M24
M20
M24
M20
1.65
1.42
1.65
1.65
1.65
1.65
1.97
1.65
1.97
1.65
8.66
8.66
0.94
12.40
1.10
13.19
1.38
14.76
1.38
17.72
1.38
17.72
O
42.81
42.57
47.83
47.05
52.14
51.33
60.04
61.03
W
54.62
54.38
61.02
60.24
66.90
66.09
RA
1.97
3.54
1.18
1.97
3.74
1.18
3.35
4.33
1.18
3.35
3.35
4.33
4.33
1.38
1.38
Approx
Wt
lb
8.46
2249
9.65
3263
10.43
3968
78.74
11.61
6057
78.74
11.61
6289
(161-110) 131

N
N
X
B
USEABLE
LENGTH
6-HOLES
U DIA . FOR
GRADE 5 BOLT
SC
SA
SB
S
SE (TAPPED HOLE)
SF (DEPTH)
TA
TB
A
USEABLE
LENGTH
TC
TE (TAPPED HOLE)
TF (DEPTH )
Q
M
DRIVE
SIZE
M1220
M1230
M1240
M1250
DRIVE
SIZE
M1220
M1230
M1240
M1250
BOTH
ENDS
Q
M
FF
GA
G
K
FF
GA
10.63
10.63
10.63
10.63
13.78
13.78
16.14
16.14
22.83
21.26
26.38
24.41
36.61
36.61
43.31
43.31
3.94
3.94
4.72
4.72
4.33
4.33
5.51
5.51
28.15
28.15
32.68
32.68
34.45
34.45
39.57
39.57
18.50
16.93
20.87
18.90
70.87
70.87
82.48
82.48
31.89
31.89
35.43
35.43
13.19
13.19
14.76
14.76
31.10
31.10
35.24
35.24
76.77
78.35
82.09
84.06
4.92
4.92
5.51
5.51
2.36
2.36
2.56
2.56
1.89
1.89
2.17
2.17
18.31
18.31
21.65
21.65
99.61
99.61
108.46
108.46
17.32
17.32
19.09
19.09
3.31
3.31
3.23
3.23
26.10
26.10
29.84
29.84
Low Speed Shaft

S
8.6614 m6
8.6614 m6
9.8425 m6
9.8425 m6
SA
9.09
9.09
10.31
10.31
SB
1.97
1.97
2.20
2.20
SC
12.60
12.60
14.17
14.17
High Speed Shaft

SE
M30
M30
M30
M30
SF
2.36
2.36
2.36
2.36
T
4.3307 m6
4.3307 m6
4.3307 m6
4.3307 m6
TA
4.57
4.57
4.57
4.57
TB
1.10
1.10
1.10
1.10
TC
9.84
9.84
9.84
9.84
TE
M24
M24
M24
M24
TF
1.97
1.97
1.97
1.97
Approx
Wt
lb
10926
11433
15582
16462
132 (161-110)
THIS PAGE INTENTIONALLY LEFT BLANK
(161-110) 133
Type DZC3 Triple Reduction

L
M
Q
M
Q
SE (TAPPED HOLE)
SF (DEPTH )
EE
4-HOLES
DD DIA. FOR
CLASS 5 BOLT
SB S
CC
SA
AA
T
TB
CC
A
USABLE
LENGTH
EE
TA
BB
TE (TAPPED HOLE)
TF (DEPTH )
TC
T
TG
F
RA
G
C W
GA
SC
GB
M
B
USABLE
LENGTH
BOTH
ENDS
X
F
V
8-HOLES
U DIA . FOR
CLASS 5 BOLT
DRIVE
SIZE
M1130
M1140
M1150
DRIVE
SIZE
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
3.94
2.76
4.33
3.54
5.91
3.94
Ratios
AA
BB
CC
DD
EE
GA
GB
9.84
4.72
3.43
11.81
3.15
8.35
0.94
16.69
1.18
4.41
7.87
3.94
7.87
3.94
26.14
11.42
12.44
6.10
3.07
13.39
3.54
9.29
1.10
18.58
1.18
4.57
9.06
4.72
9.06
4.72
29.61
12.99
6.10
3.94
15.16
3.94
10.43
1.10
20.87
1.18
4.76 10.63
5.91
9.96
5.67
33.66
Low Speed Shaft

S
SA
14.0-80.0
3.5433 m6 3.74
90.0-125.0
14.0-80.0
M1140
4.3307 m6 4.57
90.0-125.0
14.0-80.0
M1150
4.7244 m6 5.00
90.0-125.0
M1130
High Speed Shaft
SB
SC
SE
SF
0.98
4.33
M24
1.97
1.10
5.51
M24
1.97
1.26
5.51
M24
1.97
TA
TB
TC
TE
TF
TG
1.5748 k6
0.9843 j6
1.7717 k6
1.1811 j6
1.9685 k6
1.3780 k6
1.69
1.10
1.91
1.30
2.11
1.50
0.47
0.31
0.55
0.31
0.55
0.39
3.94
2.76
4.33
3.54
5.51
3.94
M16
M10
M16
M10
M16
M12
1.42
0.87
1.42
0.87
1.42
1.10
18.31
17.12
19.67
18.82
21.26
19.45
RA
4.92 11.61 1.57
3.23
0.98
13.39
5.91 13.98 1.97
3.43
1.18
14.57
6.50 14.69 1.97
3.41
1.18
Approx
Wt
lb
0.57
8.35
28.50
6.10
827
0.73
9.29
31.97
7.09
1186
0.73
10.43
36.02
7.68
1470
134 (161-110)
Type DZC3 Triple Reduction

L
M
Q
M
Q
SE (TAPPED HOLE)
SF (DEPTH )
EE
4-HOLES
DD DIA. FOR
CLASS 5 BOLT
SB S
CC
SA
AA
T
TB
CC
A
USABLE
LENGTH
TA
BB
EE
TE (TAPPED HOLE)
TF (DEPTH )
TC
T
TG
F
RA
G
C W
GA
SC
GB
M
B
USABLE
LENGTH
BOTH
ENDS
X
F
V
8-HOLES
U DIA . FOR
CLASS 5 BOLT
DRIVE
SIZE
M1160
M1170
M1180
M1190
DRIVE
SIZE
M1160
M1170
M1180
M1190
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
5.91
5.51
6.10
5.91
7.09
6.30
7.68
6.89
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
AA
BB
CC
DD
EE
14.57
7.48
3.74
16.93
3.94
11.02
1.10
22.05
1.18
4.92
11.71
16.93
7.48
3.94
19.09
3.94
11.81
1.38
24.80
1.18
5.51
18.50
7.48
3.94
22.05
3.94
13.19
1.38
26.38
1.18
21.26
8.86
4.13
24.80
4.33
14.76
1.65
29.53
1.18
Low Speed Shaft

S
GB
6.50 10.93 6.10
36.61
15.94
13.78
5.91 12.60 6.30
40.94
5.51
16.14
7.09 14.17 7.68
5.91
18.31
7.09 17.13 8.86
SB
SC
SE
SF
5.1181 m6 5.39
1.26
7.09
M24
1.97
5.1181 m6 5.39
1.26
7.09
M24
1.97
5.9055 m6 6.22
1.42
7.09
M24
1.97
6.6929 m6 7.05
1.57
7.87
M24
1.97
RA
6.99 16.61 1.97
3.35
1.18
16.14
7.09 16.93 1.97
3.54
1.18
46.06
18.50
8.27 17.91 1.97
3.74
1.18
51.97
20.08
8.46 20.28 3.35
4.33
1.18
2.1654 m6
1.5748 k6
2.1654 m6
1.9685 k6
2.7559 m6
2.1654 m6
3.1496 m6
2.5591 m6
TA
TB
TC
TE
TF
TG
2.32
1.69
2.32
2.11
2.93
2.32
3.35
2.72
0.63
0.47
0.63
0.55
0.79
0.63
0.87
0.71
5.91
5.51
5.91
5.51
7.09
6.30
7.09
6.30
M20
M16
M20
M16
1.65
1.42
1.65
1.42
M20
1.65
M20
1.65
23.56
23.15
23.70
23.46
25.79
25.00
27.33
26.53
High Speed Shaft
SA
GA
Approx
Wt
lb
0.94
11.02
38.98
8.37
1687
0.94
12.40
43.31
8.46
2249
1.10
13.19
48.43
9.65
3263
1.38
14.76
54.33
10.43
3968
(161-110) 135
Type DBT3 Triple Reduction with TA Taper Bushing

PA
X
M
PB
T
TB
TA
TE (TAPPED HOLE)
TF (DEPTH )
A
USABLE
LENGTH
TC
T
W
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
RA
CC
AA
8-HOLES
U DIA . FOR
GRADE 5 BOLT
BOTH
ENDS
CC
Q
M
Q
M
EE
BB
GA
GB
DRIVE
SIZE
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
M1140
90.0-125.0
14.0-80.0
M1150
90.0-125.0
14.0-80.0
M1160
90.0-125.0
M1130
DRIVE
SIZE
M1130
M1140
M1150
M1160
AA
BB
3.94
9.84 3.43
2.76
4.33
12.44 3.07
3.54
5.91
12.99 3.94
3.94
5.91
14.57 3.74
5.51
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
CC
DD
EE
3.15
8.35
0.94 16.69 1.18
3.54
9.29
1.10 18.58 1.18
3.94 10.43 1.10 20.87 1.18

3.94 11.02 1.10 22.05 1.18
GA
GB
T
1.5748 k6
0.9843 j6
1.7717 k6
1.1811 j6
1.9685 k6
1.3780 k6
2.1654 m6
1.5748 k6
TA
1.69
1.10
1.91
1.30
2.11
1.50
2.32
1.69
TB
0.47
0.31
0.55
0.31
0.55
0.39
0.63
0.47
30.12
28.94
33.06
4.57 9.06 4.72 9.06 4.72 29.61 13.39 5.91
32.21
36.40
4.76 10.63 5.91 9.96 5.67 33.66 14.57 6.50
34.59
40.50
4.92 11.71 6.50 10.93 6.10 36.61 15.94 6.99
40.08
4.41
7.87
3.94
7.87
3.94 26.14 11.42 4.92
High Speed Shaft
TC
3.94
2.76
4.33
3.54
5.51
3.94
5.91
5.51
TE
M16
M10
M16
M10
M16
M12
M20
M16
TF
1.42
0.87
1.42
0.87
1.42
1.10
1.65
1.42
0.57
8.35
0.73
9.29
0.73
10.43
0.94
11.02
PA
PB
RA
2.20
9.51
7.28
1.57
3.23
0.98
2.20 10.50 8.07
1.97
3.43
1.18
2.20 10.94 8.86
1.97
3.41
1.18
2.36 11.93 9.45
1.97
3.35
1.18
W
38.47
37.28
42.35
41.50
46.83
45.02
51.52
51.11
Approx
Wt
lb
6.10
774
7.09
1100
7.68
1329
8.37
1510
136 (161-110)
Type DBT3 Triple Reduction with TA Taper Bushing

PA
X
PB
T
TB
TA
TE (TAPPED HOLE)
TF (DEPTH )
A
USABLE
LENGTH
TC
T
W
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
RA
CC
AA
8-HOLES
U DIA . FOR
GRADE 5 BOLT
BOTH
ENDS
CC
Q
M
Q
M
EE
BB
GA
GB
DRIVE
SIZE
M1170
M1180
M1190
M1200
M1210
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
11.2-100.0
12.5-112.0
6.10
5.91
7.09
6.30
7.68
6.89
9.45
9.45
DRIVE
SIZE
M1170
M1180
M1190
M1200
M1210
AA
BB
CC
DD
EE
GA
GB
16.93 3.94
3.94 11.81 1.38 24.80 1.18
5.51 13.78 5.91 12.60 6.30 40.94 16.14 7.09
18.50 3.94
3.94 13.19 1.38 26.38 1.18
5.51 16.14 7.09 14.17 7.68 46.06 18.50 8.27
21.26 4.13
4.33 14.76 1.65 29.53 1.18
5.91 18.31 7.09 17.13 8.86 51.97 20.08 8.46
25.20 5.12
25.20 5.12
5.91 18.70 1.65 35.43 1.57

5.91 17.72 1.65 35.43 1.57
6.30 21.46 7.87 22.05 12.40 60.83 22.44 9.65

6.30 21.46 7.87 22.05 11.42 60.83 22.44 9.65
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
11.2-63.0
71.0-100.0
12.5-71.0
80.0-112.0
High Speed Shaft

T
2.1654 m6
1.9685 k6
2.7559 m6
2.1654 m6
3.1496 m6
2.5591 m6
4.3307 m6
2.9528 m6
4.3307 m6
2.9528 m6
TA
2.32
2.11
2.93
2.32
3.35
2.72
4.57
3.15
4.57
3.15
TB
0.63
0.55
0.79
0.63
0.87
0.71
1.10
0.79
1.10
0.79
TC
5.91
5.51
7.09
6.30
7.09
6.30
8.66
8.66
TE
M20
M16
TF
1.65
1.42
M20
PA
PB
42.81
2.36 11.81 10.24 1.97
42.57
47.83
2.36 13.19 11.02 1.97
47.05
52.14
2.56 13.98 11.61 3.35
51.33
60.04 . . . 13.03 11.00 3.35
61.03 . . . 13.03 11.00 3.35
W
54.62
54.38
61.02
60.24
66.90
66.09
RA
3.54
1.18
3.74
1.18
4.33
1.18
4.33
4.33
1.38
1.38
Approx
Wt
lb
8.46
2249
9.65
3263
10.43
3968
0.94
12.40
1.65
1.10
13.19
M20
1.65
1.38
14.76
M24
M20
M24
M20
1.97
1.65
1.97
1.65
1.38
17.72
78.74
11.61
5650
1.38
17.72
78.74
11.61
5849
(161-110) 137
Type DZT3 Triple Reduction

L
M
Q
M
Q
EE
4-HOLES
DD DIA. FOR
CLASS 5 BOLT

CC
T
TB
AA
TA
TE (TAPPED HOLE)
TF (DEPTH )
CC
A
USABLE
LENGTH
BB
EE
TC
T
TG
F
RA
G
PB
M
DRIVE
SIZE
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
M1140
90.0-125.0
14.0-80.0
M1150
90.0-125.0
M1130
DRIVE
SIZE
M1130
M1140
M1150
3.94
2.76
4.33
3.54
5.91
3.94
AA
BB
GB
J
CC
C W
GA
X
PA
DD
BOTH
ENDS
8-HOLES
U DIA . FOR
CLASS 5 BOLT
EE
GA
GB
PA
PB
RA
9.84 3.43 11.81 3.15
8.35
0.94 16.69 1.18
4.41
7.87
3.94
7.87
3.94 26.14 11.42 4.92
2.20
9.51
7.28
1.57
3.23
0.98
12.44 3.07 13.39 3.54
9.29
1.10 18.58 1.18
4.57
9.06
4.72
9.06
4.72 29.61 13.39 5.91
2.20 10.50
8.07
1.97
3.43
1.18
12.99 3.94 15.16 3.94 10.43
1.10 20.87 1.18
4.76 10.63
5.91
9.96
5.67 33.66 14.57 6.50
2.20 10.94
8.86
1.97
3.41
1.18
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
High Speed Shaft

T
1.5748 k6
0.9843 j6
1.7717 k6
1.1811 j6
1.9685 k6
1.3780 k6
TA
1.69
1.10
1.91
1.30
2.11
1.50
TB
0.47
0.31
0.55
0.31
0.55
0.39
TC
3.94
2.76
4.33
3.54
5.51
3.94
TE
M16
M10
M16
M10
M16
M12
TF
1.42
0.87
1.42
0.87
1.42
1.10
TG
18.31
17.12
19.67
18.82
21.26
19.45
Approx
Wt
lb
0.57
8.35
28.50
6.10
774
0.73
9.29
31.97
7.09
1100
0.73
10.43
36.02
7.68
1329
138 (161-110)
Type DZT3 Triple Reduction

L
M
Q
M
Q
EE
4-HOLES
DD DIA. FOR
CLASS 5 BOLT

CC
T
TB
AA
TA
TE (TAPPED HOLE)
TF (DEPTH )
CC
A
USABLE
LENGTH
BB
EE
TC
T
TG
F
RA
G
PB
M
DRIVE
SIZE
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
M1170
90.0-125.0
14.0-80.0
M1180
90.0-125.0
14.0-80.0
M1190
90.0-125.0
M1160
DRIVE
SIZE
M1160
M1170
M1180
M1190
5.91
5.51
6.10
5.91
7.09
6.30
7.68
6.89
AA
BB
CC
GB
J
C W
GA
X
PA
DD
BOTH
ENDS
8-HOLES
U DIA . FOR
CLASS 5 BOLT
EE
GA
GB
PA
PB
RA
14.57 3.74 16.93 3.94 11.02 1.10 22.05 1.18
4.92 11.71 6.50 10.93 6.10 36.61 15.94 6.99
2.36 11.93
9.45 1.97
3.35
1.18
16.93 3.94 19.09 3.94 11.81 1.38 24.80 1.18
5.51 13.78 5.91 12.60 6.30 40.94 16.14 7.09
2.36 11.81 10.24 1.97
3.54
1.18
18.50 3.94 22.05 3.94 13.19 1.38 26.38 1.18
5.51 16.14 7.09 14.17 7.68 46.06 18.50 8.27
2.36 13.19 11.02 1.97
3.74
1.18
21.26 4.13 24.80 4.33 14.76 1.65 29.53 1.18
5.91 18.31 7.09 17.13 8.86 51.97 20.08 8.46
2.56 13.98 11.61 3.35
4.33
1.18
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
High Speed Shaft

T
2.1654 m6
1.5748 k6
2.1654 m6
1.9685 k6
2.7559 m6
2.1654 m6
3.1496 m6
2.5591 m6
TA
2.32
1.69
2.32
2.11
2.93
2.32
3.35
2.72
TB
0.63
0.47
0.63
0.55
0.79
0.63
0.87
0.71
TC
5.91
5.51
5.91
5.51
7.09
6.30
7.09
6.30
TE
M20
M16
M20
M16
TF
1.65
1.42
1.65
1.42
M20
1.65
M20
1.65
TG
23.56
23.15
23.70
23.46
25.79
25.00
27.33
26.53
Approx
Wt
lb
0.94
11.02
38.98
8.37
1510
0.94
12.40
43.31
8.46
2249
1.10
13.19
48.43
9.65
3263
1.38
14.76
54.33
10.43
3968
(161-110) 139
Type DBJ3 Triple Reduction w/Hollow LSS - Shrink Disc Mounted

AF
AG
MINIMUM CLEARANCE
OF SHAFT GUARD
AD
PC
X
UE UA
AL
AJ
M
T
TB
TA
TE (TAPPED HOLE)
TF (DEPTH)
A
USABLE
LEN GT H
TC
T
W
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
RA
CC
AE
CLEARANCE
AA
BOTH
ENDS
8-HOLES
U DIA . FOR
GRADE 5 BOLT
CC
Q
M
Q
M
BB
EE
GA
GB
DRIVE
SIZE
M1130
M1140
M1150
M1160
DRIVE
SIZE
M1130
M1140
M1150
M1160
Ratios
14.0 - 80.0
90.0 - 125.0
14.0 - 80.0
90.0 - 125.0
14.0 - 80.0
90.0 - 125.0
14.0 - 80.0
90.0 - 125.0
3.94
2.76
4.33
3.54
5.91
3.94
5.91
5.51
Ratios
14.0 - 80.0
90.0 - 125.0
14.0 - 80.0
90.0 - 125.0
14.0 - 80.0
90.0 - 125.0
14.0 - 80.0
90.0 - 125.0
M
4.92
5.91
6.50
6.99
AA
AD
AE
AF
AG
AJ
AL
BB
CC
DD
EE
GA
GB
9.84
16.57 12.09
0.79
21.14 3.3465
8.46
3.43
3.15
8.35
0.94
16.69
1.18
4.41
7.87
3.94
7.87
3.94
26.14 11.42
12.44
18.82 13.54
0.75
23.66 3.9370 10.24
3.07
3.54
9.29
1.10
18.58
1.18
4.57
9.06
4.72
9.06
4.72
29.61 13.39
12.99
20.39 15.00
0.83
25.63 4.3307 10.98
3.94
3.94
10.43
1.10
20.87
1.18
4.76
10.63
5.91
9.96
5.67
33.66 14.57
14.57
22.20 15.67
0.75
27.83 5.1181 13.78
3.74
3.94
11.02
1.10
22.05
1.18
4.92
11.71
6.50
10.93
6.10
36.61 15.94
O
30.12
28.94
33.06
32.21
36.40
34.59
40.50
40.08
PC
RA
10.39
6.89
1.57
3.23
0.98
11.69
7.83
1.97
3.43
1.18
12.99
8.50
1.97
3.41
1.18
13.78
9.13
1.97
3.35
1.18
High Speed Shaft

T
1.5748 k6
0.9843 j6
1.7717 k6
1.1811 j6
1.9685 k6
1.3780 k6
2.1654 m6
1.5748 k6
TA
1.69
1.10
1.91
1.30
2.11
1.50
2.32
1.69
TB
0.47
0.31
0.55
0.31
0.55
0.39
0.63
0.47
TC
3.94
2.76
4.33
3.54
5.51
3.94
5.91
5.51
TE
M16
M10
M16
M10
M16
M12
M20
M16
TF
1.42
0.87
1.42
0.87
1.42
1.10
1.65
1.42
UA
UE
0.57
3.5433
7.48
8.35
0.73
4.1339
9.25
9.29
0.73
4.5276
9.37
10.43
0.94
5.3150 10.24
11.02
W
38.47
37.28
42.35
41.50
46.83
45.02
51.52
51.11
Approx
Wt
lb
6.10
774
7.09
1100
7.68
1329
8.37
1510
zz J7 tolerance.
H7 tolerance.
140 (161-110)
Type DBJ3 Triple Reduction w/Hollow LSS - Shrink Disc Mounted

AF
AG
MINIMUM CLEARANCE
OF SHAFT GUARD
AD
PC
X
UE UA
AL
AJ
M
T
TB
TA
TE (TAPPED HOLE)
TF (DEPTH)
A
USABLE
LEN GT H
TC
T
W
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
RA
CC
AE
CLEARANCE
AA
BOTH
ENDS
8-HOLES
U DIA . FOR
GRADE 5 BOLT
CC
Q
M
Q
M
BB
EE
GA
GB
DRIVE
SIZE
Ratios
14.0 - 80.0
90.0 - 125.0
14.0 - 80.0
M1180
90.0 - 125.0
14.0 - 80.0
M1190
90.0 - 125.0
M1200 11.2 - 100.0
M1210 12.5 - 112.0
6.10
5.91
7.09
6.30
7.68
6.89
9.45
9.45
DRIVE
SIZE
M1170
M1170
M1180
M1190
M1200
M1210
Ratios
14.0 - 80.0
90.0 - 125.0
14.0 - 80.0
90.0 - 125.0
14.0 - 80.0
90.0 - 125.0
11.2 - 63.0
71.0 - 100.0
12.5 - 71.0
80.0 - 112.0
7.09
8.27
8.46
AA
AD
AE
AF
AG
AJ
AL
BB
CC
DD
EE
GA
GB
16.93
22.44 18.31
0.83
28.15 5.5118 12.95
3.94
3.94
11.81
1.38
24.80
1.18
5.51
13.78
5.91
12.60
6.30 40.94 16.14
18.50
25.98 19.96
0.79
32.87 6.4961 15.75
3.94
3.94
13.19
1.38
26.38
1.18
5.51
16.14
7.09
14.17
7.68 46.06 18.50
21.26
27.83 23.46
0.91
34.84 7.0866 17.32
4.13
4.33
14.76
1.65
29.53
1.18
5.91
18.31
7.09
17.13
8.86 51.97 20.08
25.20
25.20
30.98 29.57
30.98 29.57
0.87
0.87
38.27 7.8740 18.70

38.27 7.8740 18.70
5.12
5.12
5.91
5.91
18.70
17.72
1.65
1.65
35.43
35.43
1.57
1.57
6.30
6.30
21.46
21.46
7.87
7.87
22.05 12.40 60.83 22.44

22.05 11.42 60.83 22.44
O
42.81
42.57
47.83
47.05
52.14
51.33
PC
RA
13.90
9.29
1.97
3.54
1.18
16.30
10.43
1.97
3.74
1.18
17.32
11.34
3.35
4.33
1.18
9.65
60.04
19.69
12.48
3.35
4.33
1.38
9.65
61.03
19.69
12.48
3.35
4.33
1.38

High Speed Shaft

T
2.1654 m6
1.9685 k6
2.7559 m6
2.1654 m6
3.1496 m6
2.5591 m6
4.3307 m6
2.9528 m6
4.3307 m6
2.9528 m6
TA
2.32
2.11
2.93
2.32
3.35
2.72
4.57
3.15
4.57
3.15
TB
0.63
0.55
0.79
0.63
0.87
0.71
1.10
0.79
1.10
0.79
TC
5.91
5.51
7.09
6.30
7.09
6.30
8.66
8.66
TE
M20
M16
TF
1.65
1.42
M20
UA
UE
W
54.62
54.38
61.02
60.24
66.90
66.09
Approx
Wt
lb
8.46
2249
9.65
3263
10.43
3968
0.94
5.7087 11.42
12.40
1.65
1.10
6.6929 13.78
13.19
M20
1.65
1.38
7.2835 14.57
14.76
M24
M20
M24
M20
1.97
1.65
1.97
1.65
1.38
8.2677 15.35
17.72
78.74
11.61
5650
1.38
8.2677 15.35
17.72
78.74
11.61
5849
(161-110) 141
Type DBQ3 Triple Reduction With Hollow Low Speed Shaft

PC
X
AF
UE UA
T
TB
TA
TE (TAPPED HOLE)
TF (DEPTH)
A
USABLE
LEN GT H
TC
T
W
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
RA
CC
AA
BOTH
ENDS
8-HOLES
U DIA . FOR
GRADE 5 BOLT
CC
Q
M
Q
M
BB
EE
GA
GB
DRIVE
SIZE
M1130
M1140
M1150
M1160
DRIVE
SIZE
M1130
M1140
M1150
M1160
Ratios
14.0 - 80.0
90.0 - 125.0
14.0 - 80.0
90.0 - 125.0
14.0 - 80.0
90.0 - 125.0
14.0 - 80.0
90.0 - 125.0
3.94
2.76
4.33
3.54
5.91
3.94
5.91
5.51
Ratios
14.0 - 80.0
90.0 - 125.0
14.0 - 80.0
90.0 - 125.0
14.0 - 80.0
90.0 - 125.0
14.0 - 80.0
90.0 - 125.0
M
4.92
5.91
6.50
6.99
O
30.12
28.94
33.06
32.21
36.4
34.59
40.5
40.08
AA
AF
BB
CC
DD
EE
GA
GB
9.84
0.81
3.43
3.15
8.35
0.94
16.69
1.18
4.41
7.87
3.94
7.87
3.94
26.14
11.42
12.44
0.75
3.07
3.54
9.29
1.10
18.58
1.18
4.57
9.06
4.72
9.06
4.72
29.61
13.39
12.99
0.87
3.94
3.94
10.43
1.10
20.87
1.18
4.76
10.63
5.91
9.96
5.67
33.66
14.57
14.57
0.80
3.74
3.74
11.02
1.10
22.05
1.18
4.92
11.71
6.50
10.93
6.10
36.61
15.94
PC
RA
6.91
1.57
3.23
0.98
7.83
1.97
3.43
1.18
7.68
1.97
3.41
1.18
9.17
1.97
3.35
1.18
High Speed Shaft

T
1.5748 k6
0.9846 j6
1.7717 k6
1.1811 j6
1.9685 k6
1.3780 k6
2.1654 m6
1.5748 k6
TA
1.69
1.10
1.91
1.30
2.11
1.50
2.32
1.69
TB
0.47
0.31
0.55
0.31
0.55
0.39
0.63
0.47
TC
3.94
2.76
4.33
3.54
5.51
3.94
5.91
5.51
TE
M16
M10
M16
M10
M16
M12
M20
M16
TF
1.42
0.87
1.42
0.87
1.42
1.10
1.65
1.42
UA
UE
0.57
3.74
8.81
8.35
0.73
4.33
10.30
9.29
0.73
4.73
10.78
10.43
0.94
5.32
11.56
11.02
W
38.47
37.28
42.35
41.5
46.83
45.02
51.52
51.11
Approx
Wt
lb
6.10
740
7.09
1065
7.68
1321
8.37
1698
H7 tolerance.
142 (161-110)
Type DBQ3 Triple Reduction With Hollow Low Speed Shaft

PC
X
AF
UE UA
T
TB
TA
TE (TAPPED HOLE)
TF (DEPTH)
A
USABLE
LEN GT H
TC
T
W
EE
4-HOLES
DD DIA. FOR
GRADE 5 BOLT
RA
CC
AA
BOTH
ENDS
8-HOLES
U DIA . FOR
GRADE 5 BOLT
CC
Q
M
Q
M
BB
EE
GA
GB
DRIVE
SIZE
M1170
M1180
M1190
M1200
M1210
DRIVE
SIZE
M1170
M1180
M1190
M1200
M1210
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
11.2-100.0
12.5-112.0
6.10
5.91
7.09
6.30
7.68
6.89
9.45
9.45
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
11.2-63.0
71.0-100.0
12.5-71.0
80.0-112.0
AA
AF
BB
CC
DD
EE
16.93
0.85
3.94
3.94
11.81
1.38
24.8
1.18
18.50
0.79
3.94
3.94
13.19
1.38
26.38
21.26
0.91
4.13
4.13
14.76
1.65
25.20
25.20
0.87
0.87
5.12
5.12
5.12
5.12
18.70
17.72
1.65
1.65
PC
RA
42.81
42.57
47.83
47.05
52.14
51.33
9.31
1.97
3.54
1.18
10.43
1.97
3.74
1.18
11.34
3.35
4.33
1.18
9.65
60.04
12.48
3.35
4.33
1.38
9.65
61.03
12.48
3.35
4.33
1.38
7.09
8.27
8.46

GA
GB
5.51
13.78
5.91
12.60
1.18
5.51
16.14
7.09
29.53
1.18
5.91
18.31
35.43
35.43
1.57
1.57
6.30
6.30
21.46
21.46
High Speed Shaft

T
2.1654 m6
1.9685 k6
2.7559 m6
2.1654 m6
3.1496 m6
2.5591 m6
4.3307 m6
2.9528 m6
4.3307 m6
2.9528 m6
TA
2.32
2.11
23.93
2.32
3.35
2.72
4.57
3.15
4.57
3.15
TB
0.63
0.55
0.79
0.63
0.87
0.71
1.10
0.79
1.10
0.79
TC
5.91
5.51
7.09
6.30
7.09
6.30
8.66
8.66
6.30
40.94
16.14
14.17
7.68
46.06
18.50
7.09
17.13
8.86
51.97
20.08
7.87
7.87
22.05
22.05
12.40
11.42
60.83
60.83
22.44
22.44
UA
UE
0.94
5.91
12.59
12.40
Approx
Wt
lb
8.46
2055
9.65
2899
10.43
4026
TE
M20
M16
TF
1.65
1.42
M20
1.65
1.10
6.69
15.04
13.19
M20
1.65
1.38
7.28
15.90
14.76
M24
M20
M24
M20
1.97
1.65
1.97
1.65
1.38
8.66
16.69
17.72
78.74
11.61
5615
1.38
8.66
16.69
17.72
78.74
11.61
5818
54.62
54.38
61.02
60.24
66.9
66.09
(161-110) 143
Type DXA3 Triple Reduction with Lube Pump & Drywell

UB - DIA UNC TAP

UC - DEEP
WA
W
RA
HB
SB
SB
AB
AA
SA
SIZES M1150-M1160
AD
SA
SIZE M1170
T
TB
HD
HC
TA
4-HOLES
DD DIA FOR
GRADE 5 BOLT
TE (TAPPED HOLE)
TF (DEPTH )
H
HA
AE
CLEARANCE
A
USABLE
LENGTH
QM
L
QM
TC
SE
AC
EE
EE
CC
SG
EE BA
13.80
B
USABLE
LENGTH
SC
CC
SF
DRIVE
SIZE
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
M1160
90.0-125.0
14.0-80.0
M1170
90.0-125.0
M1150
DRIVE
SIZE
M1150
M1160
M1170
AA
AB
AC
AD
AE
BA
CC
DD
EE
HA
HB
HC
HD
RA
5.91
36.40
16.14 8.07 31.10 10.43 25.79 9.45 13.58 3.94 10.43 1.38 20.87 0.79 32.48 14.90 2.17 7.79 3.42 3.54 8.66 2.36 15.35
3.41 1.18
3.94
34.59
5.91
40.50
17.32 8.66 32.60 11.02 28.03 9.45 13.90 3.94 11.02 1.38 22.05 0.79 35.43 15.53 1.97 7.79 3.45 3.54 9.25 2.36 16.73
3.35 1.18
5.51
40.08
6.10
42.81
20.08 10.04 34.17 12.40 28.50 11.02 15.28 3.94 11.81 1.38 24.80 0.79 39.76 16.91 1.97 7.79 3.46 3.54 10.04 2.36 16.93
3.54 1.18
5.91
42.57
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
Low Speed Shaft
High Speed Shaft

SF
SA
SB
SC
SE
6.2992 m6
6.65
1.57
7.87
1.81 12.992 3.94
6.6929 m6
7.05
1.57
7.87
1.81 14.173 4.33
7.4803 m6
7.87
1.77
8.66
1.85 15.354 3.98
.002
SG
TA
TB
TC
TE
TF
1.9685 k6
1.3780 k6
2.1654 m6
1.5748 k6
2.1654 m6
1.9685 k6
2.11
1.50
2.32
1.69
2.32
2.11
0.55
0.39
0.63
0.47
0.63
0.55
5.51
3.94
5.91
5.51
5.91
5.51
M16
M12
M20
M16
M20
M16
1.42
1.10
1.65
1.42
1.65
1.42
UB
UC
UD
M20
0.98
4.528
7.68
36.02
M24
1.50
4.528
8.37
M30
1.57
5.118
8.46
WA
46.83
45.02
51.52
38.98
51.11
54.62
43.31
54.38
Approx
Wt
lb
1545
1761
2324
144 (161-110)
Type DXA3 Triple Reduction with Lube Pump & Drywell

UB - D IA UNC TAP
UC - DEEP
WA
W
RA
SB
HB
O
W
AB
SA
AA
AD
T
TB
HD
TA
HC
TE (TAPPED HOLE)
TF (DEPTH )
4-HOLES
DD DIA FOR
GRADE 5 BOLT
HA
AE
CLEARANCE
A
USABLE
LENGTH
QM
L
QM
TC
SE
AC
EE
EE
CC
SG
EE BA
13.80
B
USABLE
LENGTH
SC
CC
SF
DRIVE
SIZE
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
M1190
90.0-125.0
M1200 11.2-100.0
M1210 12.5-112.0
M1180
DRIVE
SIZE
M1180
M1190
M1200
M1210
AA
7.09
6.30
7.68
6.89
9.45
9.45
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
11.2-63.0
71.0-100.0
12.5-71.0
80.0-112.0
AB
AC
AD
AE
BA
CC
DD
EE
HA
HB
HC
HD
47.83
47.05
52.14
24.80 12.40 39.21 14.76 35.20 11.02 16.97 4.33 14.76 1.65 29.53 0.79 50.39 19.62 1.38 7.79 3.80 3.54 12.80 3.74 20.87
51.33
31.50 15.75 42.80 17.72 39.09 12.99 18.66 4.33 18.70 1.65 35.43 0.79 60.04 22.06 0.91 7.39 3.29 3.54 16.73 3.74 23.23 60.04
31.50 15.75 42.80 17.72 39.09 12.99 18.66 4.33 17.72 1.65 35.43 0.79 60.04 22.06 0.91 7.39 3.29 3.54 15.75 3.74 23.23 61.03
21.65 10.83 38.15 13.19 32.56 11.02 16.89 3.94 13.19 1.38 26.38 0.79 44.88 17.65 1.97 7.79 3.41 3.54 11.42 2.36 19.29
Low Speed Shaft
High Speed Shaft

SF
SA
SB
SC
SE
7.8740 m6
8.27
1.77
8.66
1.81 17.717 5.31
8.6614 m6
9.09
1.97
8.66
1.91 19.685 5.41
10.2362 m6 10.71
2.20
11.02
2.13 20.472 5.08
10.2362 m6 10.71
2.20
11.02
2.13 20.472 5.08
.002
SG
TA
TB
TC
2.7559 m6
2.1654 m6
3.1496 m6
2.5591 m6
4.3307 m6
2.9528 m6
4.3307 m6
2.9528 m6
2.93
2.32
3.35
2.72
4.57
3.15
4.57
3.15
0.79
0.63
0.87
0.71
1.10
0.79
1.10
0.79
7.09
6.30
7.09
6.30
8.66
8.66
UB
UC
UD
RA
3.74 1.18
4.33 1.18
4.33 1.38
4.33 1.38
WA
Approx
Wt
lb
TE
TF
M20
1.65
M30
1.57
5.512
1.65
M30
1.57
6.299
M36
1.97
6.693
11.61 63.98 78.74
6779
M36
1.97
6.693
11.61 63.98 78.74
6779
M20
M20
M24
M20
M24
M20
1.97
1.65
1.97
1.65
61.02
60.24
66.90
10.43 54.33
66.09
9.65 48.43
3338
4043
(161-110) 145
Type DXC3 Triple Reduction with Lube Pump & LS Shaft Up

W
RA
SB
HB
SE (TAPPED HOLE)
SF (DEPTH)
S
R
AB
E
SA
AA
AD
T
TB
HD
4-HOLES
DD DIA FOR
GRADE 5 BOLT
TE (TAPPED HOLE)
TF (DEPTH)
HC
B
USABLE
LENGTH
SC
HA
BA
TA
AE
CLEARANCE
A
USABLE
LENGTH
QM
AC
L
QM
TC
EE
EE
CC
KA
DRIVE
SIZE
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
M1140
90.0-125.0
14.0-80.0
M1150
90.0-125.0
14.0-80.0
M1160
90.0-125.0
M1130
DRIVE
SIZE
M1130
M1140
M1150
M1160
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
A
3.94
2.76
4.33
3.54
5.91
3.94
5.91
5.51
AA
AB
AC
AD
AE
BA
CC
DD
EE
HA
K
EE
CC
HB
HC
HD
KA
30.12
28.94
33.06
15.04 7.52 21.06 9.29 23.07 6.10 6.89 3.94 9.29 1.10 18.58 0.79 28.58 14.09 2.17 7.79 2.87 3.54 7.60 2.36 31.97 14.17
32.21
36.40
16.14 8.07 22.36 10.43 25.79 6.10 7.01 3.94 10.43 1.38 20.87 0.79 32.48 14.90 2.17 7.79 3.42 3.54 8.66 2.36 36.02 15.35
34.59
40.50
17.32 8.66 24.98 11.02 28.03 7.48 8.25 3.94 11.02 1.38 22.05 0.79 35.43 15.53 1.97 7.79 3.45 3.54 9.25 2.36 38.98 16.73
40.08
12.99 6.50 17.72 8.35 18.15 4.72 5.51 3.15
8.35 1.10 16.69 0.79 25.35 13.11 2.17 7.79 2.83 3.54 6.77 1.97 28.50 12.20
Low Speed Shaft
High Speed Shaft
SA
SB
SC
SE
SF
3.5433 m6
3.74
0.98
4.33
M24
1.97
4.3307 m6
4.57
1.10
5.51
M24
1.97
4.7244 m6
5.00
1.26
5.51
M24
1.97
5.1181 m6
5.39
1.26
7.09
M24
1.97
T
1.5748 k6
0.9843 j6
1.7717 k6
1.1811 j6
1.9685 k6
1.3780 k6
2.1654 m6
1.5748 k6
TA
1.69
1.10
1.91
1.30
2.11
1.50
2.32
1.69
TB
0.47
0.31
0.55
0.31
0.55
0.39
0.63
0.47
TC
3.94
2.76
4.33
3.54
5.51
3.94
5.91
5.51
TE
M16
M10
M16
M10
M16
M12
M20
M16
TF
1.42
0.87
1.42
0.87
1.42
1.10
1.65
1.42
V
6.10
7.09
7.68
8.37
W
38.47
37.28
42.35
41.50
46.83
45.02
51.52
51.11
RA
3.23 0.98
3.43 1.18
3.41 1.18
3.35 1.18
Approx
Wt
lb
902
1261
1545
1761
146 (161-110)
Type DXC3 Triple Reduction with Lube Pump & LS Shaft Up

W
RA
SB
HB
SE (TAPPED HOLE)
SF (DEPTH)
S
R
AB
E
SA
AA
AD
T
TB
HD
4-HOLES
DD DIA FOR
GRADE 5 BOLT
TE (TAPPED HOLE)
TF (DEPTH)
HC
B
USABLE
LENGTH
SC
HA
BA
TA
AE
CLEARANCE
A
USABLE
LENGTH
QM
AC
L
QM
TC
EE
EE
CC
KA
DRIVE
SIZE
Ratios
M1200
M1210
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
25.0-112.0
28.0-125.0
6.10
5.91
7.09
6.30
7.68
6.89
9.45
9.45
DRIVE
SIZE
Ratios
M1170
M1180
M1190
M1170
M1180
M1190
M1200
M1210
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
11.2-63.0
71.0-100.0
12.5-71.0
80.0-112.0
AA
AB
AC
AD
AE
BA
CC
DD
EE
HA
K
EE
CC
HB
HC
HD
KA
20.08 10.04 25.39 12.40 28.50 7.48 8.46 3.94 11.81 1.38 24.80 0.79 39.76 16.91 1.97 7.79 3.46 3.54 10.04 2.36 43.31 16.93
21.65 10.83 27.56 13.19 32.56 7.48 8.27 3.94 13.19 1.38 26.38 0.79 44.88 17.65 1.97 7.79 3.41 3.54 11.42 2.36 48.43 19.29
24.80 12.40 30.71 14.76 35.20 8.86 9.84 4.33 14.76 1.65 29.53 0.79 50.39 19.62 1.38 7.79 3.80 3.54 12.80 3.74 54.33 20.87
31.50 15.75 34.65 17.72 39.09 10.63 11.42 4.33 18.70 1.65 35.43 0.79 60.04 22.06 0.91 7.39 3.29 3.54 16.73 3.74 63.98 23.23
31.50 15.75 34.65 17.72 39.09 10.63 11.42 4.33 17.72 1.65 35.43 0.79 60.04 22.06 0.91 7.39 3.29 3.54 15.75 3.74 63.98 23.23
Low Speed Shaft
High Speed Shaft
SA
SB
SC
SE
SF
5.1181 m6
5.39
1.26
7.09
M24
1.97
5.9055 m6
6.22
1.42
7.09
M24
1.97
6.6929 m6
7.05
1.57
7.87
M24
1.97
7.4803 m6
7.87
1.77
9.84
M24
1.97
7.8740 m6
8.27
1.77
9.84
M24
1.97
T
2.1654 m6
1.9685 k6
2.7559 m6
2.1654 m6
3.1496 m6
2.5591 m6
4.3307 m6
2.9528 m6
4.3307 m6
2.9528 m6
TA
2.32
2.11
2.93
2.32
3.35
2.72
4.57
3.15
4.57
3.15
TB
0.63
0.55
0.79
0.63
0.87
0.71
1.10
0.79
1.10
0.79
TC
5.91
5.51
7.09
6.30
7.09
6.30
8.66
8.66
TE
M20
M16
TF
1.65
1.42
M20
1.65
9.65
M20
1.65
10.43
M24
M20
M24
M20
1.97
1.65
1.97
1.65
8.46
O
42.81
42.57
47.83
47.05
52.14
51.33
60.04
61.03
W
54.62
54.38
61.02
60.24
66.90
66.09
RA
3.54 1.18
3.74 1.18
4.33 1.18
4.33 1.38
4.33 1.38
Approx
Wt
lb
2324
3338
4043
11.61
78.74
6151
11.61
78.74
6369
(161-110) 147
Type DXC3 Triple Reduction with Lube Pump & LS Shaft Down
W
RA
SB
HB
SE (TAPPED HOLE)
SF (DEPTH)
S
R
AB
E
SA
AA
AD
T
TB
HD
TA
G
4-HOLES
DD DIA FOR
GRADE 5 BOLT
KA
TE (TAPPED HOLE)
TF (DEPTH)
HC
HA
AE
CLEARANCE
A
USABLE
LENGTH
QM
L
QM
TC
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
M1140
90.0-125.0
14.0-80.0
M1150
90.0-125.0
14.0-80.0
M1160
90.0-125.0
M1130
DRIVE
SIZE
M1130
M1140
M1150
M1160
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
A
3.94
2.76
4.33
3.54
5.91
3.94
5.91
5.51
AA
AC
EE
B
USABLE
LENGTH
SC
DRIVE
SIZE
AB
AC
AD
AE
BA
CC
DD
EE
CC
BA
EE
HA
K
EE
CC
HB
HC
HD
KA
30.12
28.94
33.06
15.04 7.52 23.23 9.29 23.07 6.10 6.89 3.94 9.29 1.10 18.58 0.79 28.58 14.09 2.17 7.79 2.87 3.54 7.60 2.36 31.97 14.17
32.21
36.40
16.14 8.07 24.53 10.43 25.79 6.10 7.01 3.94 10.43 1.38 20.87 0.79 32.48 14.90 2.17 7.79 3.42 3.54 8.66 2.36 36.02 15.35
34.59
40.50
17.32 8.66 26.95 11.02 28.03 7.48 8.25 3.94 11.02 1.38 22.05 0.79 35.43 15.53 1.97 7.79 3.45 3.54 9.25 2.36 38.98 16.73
40.08
12.99 6.50 19.88 8.35 18.15 4.72 5.51 3.15
8.35 1.10 16.69 0.79 25.35 13.11 2.17 7.79 2.83 3.54 6.77 1.97 28.50 12.20
Low Speed Shaft
High Speed Shaft
SA
SB
SC
SE
SF
3.5433 m6
3.74
0.98
4.33
M24
1.97
4.3307 m6
4.57
1.10
5.51
M24
1.97
4.7244 m6
5.00
1.26
5.51
M24
1.97
5.1181 m6
5.39
1.26
7.09
M24
1.97
T
1.5748 k6
0.9843 j6
1.7717 k6
1.1811 j6
1.9685 k6
1.3780 k6
2.1654 m6
1.5748 k6
TA
1.69
1.10
1.91
1.30
2.11
1.50
2.32
1.69
TB
0.47
0.31
0.55
0.31
0.55
0.39
0.63
0.47
TC
3.94
2.76
4.33
3.54
5.51
3.94
5.91
5.51
TE
M16
M10
M16
M10
M16
M12
M20
M16
TF
1.42
0.87
1.42
0.87
1.42
1.10
1.65
1.42
V
6.10
7.09
7.68
8.37
W
38.47
37.28
42.35
41.50
46.83
45.02
51.52
51.11
RA
3.23 0.98
3.43 1.18
3.41 1.18
3.35 1.18
Approx
Wt
lb
902
1261
1545
1762
148 (161-110)
Type DXC3 Triple Reduction with Lube Pump & LS Shaft Down
W
RA
SB
HB
SE (TAPPED HOLE)
SF (DEPTH)
S
R
AB
E
SA
AA
AD
T
TB
HD
TA
G
4-HOLES
DD DIA FOR
GRADE 5 BOLT
KA
TE (TAPPED HOLE)
TF (DEPTH)
HC
HA
AE
CLEARANCE
A
USABLE
LENGTH
QM
L
QM
TC
Ratios
M1200
M1210
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
25.0-112.0
28.0-125.0
6.10
5.91
7.09
6.30
7.68
6.89
9.45
9.45
DRIVE
SIZE
Ratios
M1170
M1180
M1190
M1170
M1180
M1190
M1200
M1210
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
11.2-63.0
71.0-100.0
12.5-71.0
80.0-112.0
AA
AC
EE
B
USABLE
LENGTH
SC
DRIVE
SIZE
AB
AC
AD
AE
BA
CC
DD
EE
CC
BA
EE
HA
K
EE
CC
HB
HC
HD
KA
20.08 10.04 27.36 12.40 28.50 7.48 8.46 3.94 11.81 1.38 24.80 0.79 39.76 16.91 1.97 7.79 3.46 3.54 10.04 2.36 43.31 16.93
21.65 10.83 29.53 13.19 32.56 7.48 8.27 3.94 13.19 1.38 26.38 0.79 44.88 17.65 1.97 7.79 3.41 3.54 11.42 2.36 48.43 19.29
24.80 12.40 32.09 14.76 35.20 8.86 9.84 4.33 14.76 1.65 29.53 0.79 50.39 19.62 1.38 7.79 3.80 3.54 12.80 3.74 54.33 20.87
31.50 15.75 35.55 17.72 39.09 10.63 11.42 4.33 18.70 1.65 35.43 0.79 60.04 22.06 0.91 7.39 3.29 3.54 16.73 3.74 63.98 23.23
31.50 15.75 35.55 17.72 39.09 10.63 11.42 4.33 17.72 1.65 35.43 0.79 60.04 22.06 0.91 7.39 3.29 3.54 15.75 3.74 63.98 23.23
Low Speed Shaft
High Speed Shaft
SA
SB
SC
SE
SF
5.1181 m6
5.39
1.26
7.09
M24
1.97
5.9055 m6
6.22
1.42
7.09
M24
1.97
6.6929 m6
7.05
1.57
7.87
M24
1.97
7.4803 m6
7.87
1.77
9.84
M24
1.97
7.8740 m6
8.27
1.77
9.84
M24
1.97
T
2.1654 m6
1.9685 k6
2.7559 m6
2.1654 m6
3.1496 m6
2.5591 m6
4.3307 m6
2.9528 m6
4.3307 m6
2.9528 m6
TA
2.32
2.11
2.93
2.32
3.35
2.72
4.57
3.15
4.57
3.15
TB
0.63
0.55
0.79
0.63
0.87
0.71
1.10
0.79
1.10
0.79
TC
5.91
5.51
7.09
6.30
7.09
6.30
8.66
8.66
TE
M20
M16
TF
1.65
1.42
M20
1.65
9.65
M20
1.65
10.43
M24
M20
M24
M20
1.97
1.65
1.97
1.65
8.46
O
42.81
42.57
47.83
47.05
52.14
51.33
60.04
61.03
W
54.62
54.38
61.02
60.24
66.90
66.09
RA
3.54 1.18
3.74 1.18
4.33 1.18
4.33 1.38
4.33 1.38
Approx
Wt
lb
2324
3338
4043
11.61
78.74
6151
11.61
78.74
6369
(161-110) 149
Type DXM3 Triple Reduction with Lube Pump & Drywell

WA
W
HB
RA
W
AB
T
TB
E AA
TA
AD
TE (TAPPED HOLE)
TF (DEPTH)
HD
HC
4-HOLES
DD DIA FOR
CLASS 8,8 BOLT
HA
AE
CLEARANCE
A
USABLE
LENGTH
QM
L
QM
TC
SH
EE
CC
DRIVE
SIZE
M1150
M1160
M1170
DRIVE
SIZE
M1150
M1160
M1170
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
AA
AB
AC
AD
AE
BA
CC
5.91
16.14 8.07 21.73 10.43 25.79 4.21
3.94
5.91
17.32 8.66 23.15 11.02 28.03 4.45
5.51
6.10
20.08 10.04 23.15 12.40 28.50 4.25
5.91
HA
HB
HC
HD
3.94 10.43 1.38 20.87 0.79 32.48 14.90 2.17
7.79
3.42
3.54
3.94 11.02 1.38 22.05 0.79 35.43 15.53 1.97
7.79
3.45
3.94 11.81 1.38 24.80 0.79 39.76 16.91 1.97
7.79
3.46
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
SH
SJ
.002
SK
1.81
12.992
3.94
1.81
14.173
4.33
1.85
15.354
3.98
EE
BA
TA
TB
TC
TE
TF
1.9685 k6
1.3780 k6
2.1654 m6
1.5748 k6
2.1654 m6
1.9685 k6
2.11
1.50
2.32
1.69
2.32
2.11
0.55
0.39
0.63
0.47
0.63
0.55
5.51
3.94
5.91
5.51
5.91
5.51
M16
M12
M20
M16
M20
M16
1.42
1.10
1.65
1.42
1.65
1.42
RA
36.40
3.41
34.59
40.50
3.54 9.25 2.36 16.73
3.35
40.08
42.81
3.54 10.04 2.36 16.93
3.54
42.57
8.66 2.36 15.35
High Speed Shaft

Ratios
DD
AC
EE
EE
CC
SK
SJ
7.68
36.02
8.37
38.98
8.46
43.31
WA
46.83
45.02
51.52
51.11
54.62
54.38
1.18
1.18
1.18
Approx
Wt
lb
1545
1761
2324
150 (161-110)
Type DXM3 Triple Reduction with Lube Pump & Drywell

WA
W
HB
RA
W
AB
T
TB
E AA
TA
AD
TE (TAPPED HOLE)
TF (DEPTH)
HD
HC
4-HOLES
DD DIA FOR
CLASS 8,8 BOLT
HA
AE
CLEARANCE
A
USABLE
LENGTH
QM
L
QM
TC
SH
EE
CC
DRIVE
SIZE
M1180
M1190
M1200
M1210
DRIVE
SIZE
M1180
M1190
M1200
M1210
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
11.2-100.0
12.5-112.0
7.09
6.30
7.68
6.89
9.45
9.45
AA
AB
AC
AD
AE
BA
CC
HB
HC
HD
21.65 10.83 27.13 13.19 32.56 5.87
3.94 13.19 1.38 26.38 0.79 44.88 17.65 1.97
7.79
3.41
3.54 11.42 2.36 19.29
24.80 12.40 28.19 14.76 35.20 5.94
4.33 14.76 1.65 29.53 0.79 50.39 19.62 1.38
7.79
3.80
31.50 15.75 29.80 17.72 39.09 5.67

31.50 15.75 29.80 17.72 39.09 5.67
4.33 18.70 1.65 35.43 0.79 60.04 22.06 0.91

4.33 17.72 1.65 35.43 0.79 60.04 22.06 0.91
7.39
7.39
3.29
3.29
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
11.2-63.0
71.0-100.0
12.5-71.0
80.0-112.0
SH
SJ
.002
SK
1.81
17.717
5.31
1.91
19.685
5.41
2.13
20.472
5.08
2.13
20.472
5.08
EE
BA
HA
47.83
47.05
52.14
3.54 12.80 3.74 20.87
51.33
3.54 16.73 3.74 23.23 60.04
3.54 15.75 3.74 23.23 61.03
High Speed Shaft

Ratios
DD
AC
EE
EE
CC
SK
SJ
TA
TB
TC
2.7559 m6
2.1654 m6
3.1496 m6
2.5591 m6
4.3307 m6
2.9528 m6
4.3307 m6
2.9528 m6
2.93
2.32
3.35
2.72
4.57
3.15
4.57
3.15
0.79
0.63
0.87
0.71
1.10
0.79
1.10
0.79
7.09
6.30
7.09
6.30
8.66
8.66
RA
3.74
1.18
4.33
1.18
4.33
4.33
1.38
1.38
Approx
Wt
lb
WA
TE
TF
M20
1.65
9.65
48.43
1.65
10.43
54.33
11.61
63.98
78.74
6151
11.61
63.98
78.74
6369
M20
M20
M24
M20
M24
M20
1.97
1.65
1.97
1.65
61.02
60.24
66.90
66.09
3338
4043
(161-110) 151
Selection Procedure for High Torque Drives

Before making a selection, refer to Basic Information and Conditions Affecting Selection on Pages 9 and 10.
Information Required
The following basic information is required to select a Drive One
High Torque gear drive for your application.
Prime Mover Data
Type electric or hydraulic motor or engine
Power rating in kW or hp
Speed constant or variable
Dimensions if the Factory will furnish motor mounting
accessory or coupling
Driven Machine Data
Type conveyor, kiln, etc.
Power demand in kW, or hp, or equivalent torque.
Speed and direction of rotation
Service Hours per day; reversals per minute if reversing;
minutes per hour (duty cycle) if not continuous
Gear Drive Data
Type parallel shaft or right angle
Solid or Hollow output shaft
Base or shaft mounted
Ambient temperature at drive location
Altitude above sea level
Ambient air velocity at drive location
Mounting position if inclined or non-standard orientation
Shaft Connections
Shaft diameters and key sizes
Overhung loads provide full description of sheave, sprocket,
or pinion
Thrust load and direction
5. Select the gear drive type and assembly. Parallel shaft, see
Page 153 and right angle shaft, see Page 158. Note that for
shaft mounted assemblies, the required output shaft direction
of rotation determines the torque arm location. For assemblies
other than those shown, contact the Factory.
6. Determine the gear drive nominal ratio.
Divide the high speed shaft rpm by the low speed shaft rpm to
determine your ideal ratio. Choose a nominal ratio that most
closely approximates your ideal ratio from the Exact Ratio table.
Parallel shaft, see Page 154 and right angle shaft, see Page
159.
7. Check thermal rating using procedures outlined on Page 14.
The application adjusted thermal rating must equal or exceed
the actual power transmitted.
8. Overhung load (radial load) is imposed by sheaves, sprockets,
and open pinions that are mounted directly on the shaft
extensions of the gear drive. Gear drive shaft extensions that
are flexible coupling connected need not be checked for
overhung load, flexible couplings do not impose significant
overhung load.Overhung load need not be checked for shaft
mounted drives that use a standard torque arm location since
the radial and moment loading imposed on these drives are
within the capacity of the gear drive. Refer all foot or flange
mounted gear drive output shaft overhung loading to the
Factory.
Refer all input shaft overhung load applications to the Factory.
Thrust load (axial load) applied to the gear drive is unusual.
In these applications, the magnitude of the thrust load, and
the direction of thrust load, is supplied by the system designer.
Thrust loads must be within the capacity of the gear drive.
Refer all thrust load applications to the Factory.
Complex shaft loadings involving simultaneous application of
overhung load, thrust load, or bending moment (as in mixers
and agitators) should be referred directly to the Factory.
Torque Selection Method

The torque selection method is based on the power rating of the
prime mover.
1. Determine the mechanical service factor.
For engine driven or intermittent applications, refer to Factory.
2. Calculate the required output torque (lb-in) using the motor
power rating (hp) and the required output speed (rpm).
NOTE: Output speed must not exceed 10 rpm. If output speed
exceeds 10 rpm, contact the Factory for selection.
3. Calculate the equivalent torque rating by multiplying the
required output torque by the mechanical service factor
determined in Step 1.
4. Select the gear drive size from the torque rating table.
Torque Rating Table:
Parallel shaft drives, see Page 154.
Right angle shaft drives, see Page 159.
152 (161-110)
Types DHB, DHF, DHP & DHR Parallel Shaft
orientations.
Type DHB Assemblies
Type DHR Assemblies
Foot Mounted
Solid LS Shaft
0016
Flange Mounted
Solid LS Shaft
0025
0016
0025
Type DHF Assemblies

Shaft Mounted with Torque Arm
Solid LS Shaft
3 OCLOCK
TORQUE ARM
9 OCLOCK
TORQUE ARM
CCW
0016
CW
0016
0025
0025
CCW
CW
3 OCLOCK
TORQUE ARM
9 OCLOCK
TORQUE ARM
Type DHP Assemblies

Hollow LS Shaft with Shrink Disc
3 O CLOCK
TORQUE ARM
9 OCLOCK
TORQUE ARM
CW
CCW
0016
0025
0016
3 O CLOCK
TORQUE ARM
0025
CW
CCW
9 OCLOCK
TORQUE ARM
(161-110) 153
Torque Ratings lb-in/Quadruple Reduction

DRIVE
SIZE
Output Torque Rating

( Output Speed 10 rpm or Less )
M1160
M1170
M1180
M1190
M1200
M1210
910,000
1,320,000
1,845,000
2,495,000
3,240,000
4,050,000
ss Special order drives are available with output

torque ratings greater than 4,050,000 lb-in.
Hp/Quadruple Reduction

High
Speed
Shaft
rpm
1750
1430
1170
970
DRIVE SIZE
Nominal
Ratio
Range
M1160
M1170
M1180
M1190
M1200
M1210
160 - 315
355 - 710
160 - 315
355 - 710
160 - 315
355 - 710
160 - 315
355 - 710
151
102
135
102
127
102
126
89
178
126
156
126
151
110
151
107
215
158
201
151
201
151
178
135
229
178
216
178
216
159
216
153
336
270
301
251
301
221
269
216
336
270
301
251
301
221
269
216
++ Basic thermal ratings listed are based on an ambient temperature of 25C (77F) and an elevation from sea level to 750 meters. Application adjusted thermal ratings must be
calculated using the application adjusted thermal factors on Page 14 before comparing to the required load. For auxiliary cooling, contact the Factory.
Exact Ratios Quadruple Reduction

Nominal
Ratio
160
180
200
224
250
280
315
355
400
450
500
560
630
710
DRIVE SIZE
M1160
156.7
177.0
199.0
215.9
241.8
276.2
311.8
350.7
380.6
426.2
490.2
551.3
598.2
669.9
M1170
154.8
172.8
195.7
220.9
246.1
272.5
304.3
344.6
389.0
433.3
477.5
540.9
610.6
680.2
M1180
173.4
191.4
217.8
244.7
267.5
302.3
333.6
379.6
426.5
466.2
531.3
604.8
679.4
742.4
M1190
165.2
189.6
208.1
232.2
262.3
285.1
327.2
359.2
400.7
452.7
514.9
565.4
630.5
712.4
Lower ratios are available. For 10 rpm or less output speed with a total ratio requirement of less than 160:1, contact the Factory.
Higher ratios are also available. Contact the Factory for selection.
154 (161-110)
M1200
163.8
183.4
204.7
228.6
252.9
284.5
318.5
355.3
397.0
461.6
516.9
576.6
644.1
...
M1210
163.6
184.0
206.1
229.9
256.8
284.1
319.6
357.9
399.3
446.0
518.6
581.0
647.9
723.5
Type DHB4 Quadruple Reduction

X
N
S
2- SE (TAPPED HOLES)
SF (DEEP)
SH
120
SB
SA
SG
TB
8 HOLES
U DIA FOR
CLASS 5 BOLT
TC
TA
TE (TAPPED HOLE)
TF (DEPTH)
A
USABLE
LENGTH
O
L
2 KEYS
120 APART
SD
SC
BA
V
B
USABLE
LENGTH
CA
BOTH
ENDS
VA
VA
VB
VC
VD
CE
CE
CH
VC
CD
CG
CB
CF
CD
DRIVE
SIZE
M1160
M1170
M1180
M1190
M1200
M1210
DRIVE
SIZE
M1160
M1170
M1180
M1190
M1200
M1210
Ratios
BA
CA
CB
CD
CE
CF
CG
CH
160.0-710.0
160.0-710.0
160.0-710.0
160.0-710.0
160.0-630.0
160.0-710.0
2.76
3.94
3.94
3.94
5.12
5.12
11.81
11.81
16.73
16.73
21.65
21.65
30.71
30.71
37.99
37.99
46.65
46.65
16.93
19.09
22.05
24.80
27.56
28.54
16.73
16.73
20.87
20.87
25.20
25.20
33.46
33.46
40.16
40.16
49.21
49.21
9.06
9.06
10.63
10.63
13.78
13.78
4.72
4.72
5.91
5.91
7.87
7.87
9.84
9.84
11.81
11.81
13.78
13.78
15.35
15.35
18.90
18.90
21.65
21.65
1.57
1.57
1.97
1.97
2.36
2.36
11.02
11.81
13.19
14.76
18.70
17.72
22.05
24.80
26.38
29.53
35.43
35.43
15.94
16.14
18.50
20.08
22.44
22.44
50.51
51.42
61.97
64.41
76.34
78.23
11.89
13.15
14.37
15.22
17.52
17.52
SA
SB
9.0551 h7
9.49
1.97 11.02 0.39 M24 1.97 5.91 2.95
Ratios
160.0-450.0
500.0-710.0
160.0-710.0
160.0-710.0
160.0-450.0
500.0-710.0
160.0-630.0
160.0-710.0
High Speed Shaft
Low Speed Shaft

SC
SD
SE
SF
SG
SH
9.0511 h7 9.49 1.97 11.02 0.39 M24 1.97 5.91 2.95

11.4173 h7 11.89 2.48 15.75 0.49 M24 1.97 7.87 3.94
11.4173 h7 11.89 2.48 15.75 0.49 M24 1.97 7.87 3.94
14.1732 h7 14.76 3.15 20.47 0.59 M24 1.97 8.66 4.33
14.1732 h7 14.76 3.15 20.47 0.59 M24 1.97 8.66 4.33
T
1.3780 k6
1.1811 j6
1.5748 k6
1.7717 k6
2.1654 m6
1.6535 k6
2.5591 m6
2.5591 m6
TA
1.50
1.30
1.69
1.91
2.32
1.77
2.72
2.72
TB
0.39
0.31
0.47
0.55
0.63
0.47
0.71
0.71
TC
2.76
3.94
3.94
3.94
4.92
4.92
TE
M12
M10
M16
M16
M20
M16
M20
M20
TF
1.10
0.87
1.42
1.42
1.65
1.42
1.65
1.65
VA
VB
VC
VD
Approx
Wt
lb
M30 11.02 7.87 17.01 1.97 18.58 44.69 8.37
5039
M30 12.40 7.87 17.80 1.97 18.70 48.23 8.46

M42 13.19 10.24 21.65 2.95 20.63 55.31 9.65
5621
8913
M42 14.76 10.24 23.23 2.95 21.50 59.65 10.43
9850
M48 17.72 11.02 25.39 3.15 26.10 69.88 11.61 15426

M48 17.72 11.02 27.28 3.15 26.10 70.87 11.61 16017
8 - SE (Tapped Holes), SF (Deep) on SG (Bolt Circle).
(161-110) 155
Type DHF4 Quadruple Reduction

ED
EC
S
SF (DEEP)
X
SH
12
SB
SA
SG
D
T
TB
TA
TE (TAPPED HOLE)
TF (DEPTH)
TC
A
USABLE
LENGTH
O
L
2 KEYS
120 APART
SD
SC
EB
E
V
B
USABLE
LENGTH
BOTH
ENDS
CA
BA
EE
EA
W
DRIVE
SIZE
M1160
M1170
M1180
M1190
M1200
M1210
DRIVE
SIZE
M1160
M1170
M1180
M1190
M1200
M1210
Ratios
BA
CA
EA
EB
EC
ED
EE
160.0-710.0
160.0-710.0
160.0-710.0
160.0-710.0
160.0-630.0
160.0-710.0
2.76
3.94
3.94
3.94
5.12
5.12
11.81
11.81
16.73
16.73
21.65
21.65
27.95
27.95
34.25
34.25
42.91
42.91
16.93
19.09
22.05
24.80
27.56
28.54
13.98
13.98
17.13
17.13
21.46
21.46
11.02
11.81
13.19
14.76
18.70
17.72
22.05
24.80
26.38
29.53
35.43
35.43
54.72
54.72
66.93
66.93
75.20
75.20
2.56 H9
2.56 H9
2.76 H9
2.76 H9
2.95 H9
2.95 H9
30.83
31.73
36.26
38.70
44.69
46.57
1.38
1.38
1.57
1.57
2.36
2.36
51.18
51.18
62.99
62.99
70.87
70.87
15.94
16.14
18.50
20.08
22.44
22.44
50.51
51.42
61.97
64.41
76.34
78.23
11.89
13.15
14.37
15.22
17.52
17.52
Ratios
160.0-450.0
500.0-710.0
160.0-710.0
160.0-710.0
160.0-450.0
500.0-710.0
160.0-630.0
160.0-710.0
High Speed Shaft
Low Speed Shaft

S
SA
SB
SC
SD
SE
SF
SG
SH
9.0551 h7
9.49
1.97
11.02
0.39
M24
1.97
5.91
2.95
9.0551 h7
11.4173 h7
9.49
11.89
1.97
2.48
11.02
15.75
0.39
0.49
M24
M24
1.97
1.97
5.91
7.87
2.95
3.94
11.4173 h7
11.89
2.48
15.75
0.49
M24
1.97
7.87
3.94
0.59
0.59
M24
1.97
8.66
4.33
4.33
14.1732 h7
14.1732 h7
14.76
14.76
3.15
3.15
20.47
20.47
M24 1.97 8.66
T
1.3780 k6
1.1811 j6
1.5748 k6
1.7717 k6
2.1654 m6
1.6535 k6
2.5591 m6
2.5591 m6
TA
1.50
1.30
1.69
1.91
2.32
1.77
2.72
2.72
TB
0.39
0.31
0.47
0.55
0.63
0.47
0.71
0.71
TC
2.76
3.94
3.94
3.94
4.92
4.92
TE
M12
M10
M16
M16
M20
M16
M20
M20
TF
1.10
0.87
1.42
1.42
1.65
1.42
1.65
1.65
Approx
Wt
lb
11.02
82.68
8.37
5104
12.40 86.22
13.19 102.17
8.46
9.65
5688
8838
14.76 106.50 10.43
9775
17.72 120.47 11.61

17.72 121.46 11.61
15335
15926
156 (161-110)
Type DHP4 Quadruple Reduction

X
NA
HOL LOW BORE AND DRIVEN SHAFT DETAIL

S
SA
D
BA
SD SC SB
SE
SF
DRIVEN SHAFT
HOL LOW BORE

T
TC
TB
A
USABLE
LENGTH
TA
TE (TAPPED HOLE)
TF (DEPTH)
Refer to Page 163 for torque arm dimensions.
W
C
CA
CA
E
BA
V
CA
CA
BOTH
ENDS
DRIVE
SIZE
M1160
M1170
M1180
M1190
M1200
M1210
DRIVE
SIZE
M1160
M1170
M1180
M1190
M1200
M1210
Ratios
BA
CA
NA
160.0-710.0
160.0-710.0
160.0-710.0
160.0-710.0
160.0-630.0
160.0-710.0
2.76
3.94
3.94
3.94
5.12
5.12
27.95
27.95
34.25
34.25
42.91
42.91
16.93
19.09
22.05
24.80
27.56
28.54
13.98
13.98
17.13
17.13
21.46
21.46
11.02
11.81
13.19
14.76
18.70
17.72
22.05
24.80
26.38
29.53
35.43
35.43
15.94
16.14
18.50
20.08
22.44
22.44
48.27
49.17
55.67
58.11
66.46
68.35
11.89
13.15
14.37
15.22
17.52
17.52
Ratios
160.0-450.0
500.0-710.0
160.0-710.0
160.0-710.0
160.0-450.0
500.0-710.0
160.0-630.0
160.0-710.0
Low Speed Shaft
High Speed Shaft
Driven Shaft
SA
SB
SC
SD
SE
SF
3.98
9.06
11.0236 f7
9.0551 H7
3.98
6.10
9.06
11.81
11.0236 f7 9.0551 H7 4.7244 H7 9.0551 g6 4.7244 f6

14.1732 f7 11.6142 H7 8.2677 H7 11.6142 g6 8.2677 f6
6.10
11.81
14.1732 f7 11.6142 H7 8.2677 H7 11.6142 g6 8.2677 f6
6.89
6.89
13.19
13.19
15.3543 f7 12.5984 H7 7.4803 H7 12.5984 g6 7.4803 f6

15.3543 f7 12.5984 H7 7.4803 H7 12.5984 g6 7.4803 f6
4.7244 H7 9.0551 g6 4.7244 f6
T
1.3780 k6
1.1811 j6
1.5748 k6
1.7717 k6
2.1654 m6
1.6535 k6
2.5591 m6
2.5591 m6
TA
1.50
1.30
1.69
1.91
2.32
1.77
2.72
2.72
TB
0.39
0.31
0.47
0.55
0.63
0.47
0.71
0.71
TC
2.76
3.94
3.94
3.94
4.92
4.92
TE
M12
M10
M16
M16
M20
M16
M20
M20
TF
1.10
0.87
1.42
1.42
1.65
1.42
1.65
1.65
Approx
Wt
lb
11.02
41.93
8.37
5340
12.40
13.19
45.47
52.36
8.46
9.65
5924
9310
14.76
56.69 10.43
10247
17.72
17.72
66.73 11.61
67.72 11.61
15937
16528
(161-110) 157
Types DBB, DBF, DBP & DBR Right Angle Shaft
orientations.
Type DBB Assemblies
Type DBR Assemblies
Foot Mounted
Solid LS Shaft
0045
Flange Mounted
Solid LS Shaft
0046
0045
0046
Type DBF Assemblies

Solid LS Shaft
3 O CL OCK
TO RQUE ARM
9 OCLOCK
TORQUE ARM
CCW
CW
0045
0045
0046
0046
CW
CCW
9 OC LOCK
TORQUE ARM
3 O CL OCK
TO RQUE ARM
Type DBP Assemblies

Hollow LS Shaft with Shrink Disc
3 OCLOCK
TORQUE ARM
9 OCLOCK
TORQUE ARM
CCW
CW
0045
0046
0045
CCW
3 OCLOCK
TORQUE ARM
158 (161-110)
0046
CW
9 OCLOCK
TORQUE ARM
Torque Ratings lb-in/Quadruple Reduction

DRIVE
SIZE
Output Torque Rating

( Output Speed 10 rpm or Less )
M1160
M1170
M1180
M1190
M1200
M1210
910,000
1,320,000
1,845,000
2,495,000
3,240,000
4,050,000
ss Special order drives are available with output

torque ratings greater than 4,050,000 lb-in.
Hp/Quadruple Reduction

High
Speed
Shaft
rpm
1750
1430
1170
970
DRIVE SIZE
Nominal
Ratio
Range
M1160
M1170
M1180
M1190
M1200
M1210
160 - 280
315 - 630
160 - 280
315 - 630
160 - 280
315 - 630
160 - 280
315 - 630
137
101
131
102
126
89
126
86
158
126
152
126
151
110
151
107
201
151
178
151
178
151
178
151
215
173
216
178
216
178
216
178
301
251
269
251
269
251
269
226
301
251
269
251
269
251
269
226
++ Basic thermal ratings listed are based on an ambient temperature of 25C (77F) and an elevation from sea level to 750 meters. Application adjusted thermal ratings must be
calculated using the application adjusted thermal factors on Page 14 before comparing to the required load. For auxiliary cooling, contact the Factory.
Exact Ratios Quadruple Reduction

Nominal
Ratio
160
180
200
224
250
280
315
355
400
450
500
560
630
710
DRIVE SIZE
M1160
152.6
171.3
190.1
213.7
244.0
275.4
309.8
336.2
376.5
440.4
495.5
537.5
602.2
...
M1170
155.2
174.4
195.4
215.7
245.3
273.8
310.1
350.1
390.0
430.5
487.5
550.3
613,1
...
M1180
170.3
188.6
206.7
239.2
268.5
296.4
337.3
378.9
414.2
467.6
531.8
598.0
653,6
...
M1190
164.6
182.2
201.7
232.2
256.6
294.4
323.2
360.6
407.3
464.5
509.9
569.1
642.6
...
Lower ratios are available. For 10 rpm or less output speed with a total ratio requirement of less than 160:1, contact the Factory.
Higher ratios are also available. Contact the Factory for selection.
M1200
160.4
179.4
200.7
224.3
252.4
282.7
315.4
352.2
403.2
451.6
503.8
562.5
...
...
M1210
158.9
180.3
201.6
225.5
252.1
283.6
317.6
354.3
395.8
453.1
507.4
566.3
632.1
...
(161-110) 159
Type DBB4 Quadruple Reduction

X
S
SF (DEEP)
SB
SH
12
SA
SG
8 H OLES
U DIA FOR
CLASS 5 BOLT
TB
TA
A
USABLE
LENGTH
TE (TAPPED HOLE)
TF (DEPTH)
TC
2 KEYS
120 APART
SD
SC
BA
V
B
USABLE
LENGTH
CA
BO TH
ENDS
VA
VA
VB
VC
VD
CH
VC
CE
CE
CD
CG
CB
CF
CD
DRIVE
SIZE
M1160
M1170
M1180
M1190
M1200
M1210
DRIVE
SIZE
M1160
M1170
M1180
M1190
M1200
M1210
Ratios
160.0-400.0
450.0-630.0
160.0-400.0
450.0-630.0
160.0-400.0
450.0-630.0
160.0-400.0
450.0-630.0
160.0-560.0
160.0-630.0
5.91
5.51
6.10
5.91
7.09
6.30
7.68
6.89
9.45
9.45
Ratios
160.0-400.0
450.0-630.0
160.0-400.0
450.0-630.0
160.0-400.0
450.0-630.0
160.0-400.0
450.0-630.0
160.0-355.0
400.0-560.0
160.0-400.0
450.0-630.0
BA
CA
CB
CD
CE
CF
CG
CH
11.81
30.71
16.73
33.46
9.06
4.72
9.84
15.35
1.57
11.02
22.05
15.94
50.51
11.81
30.71
16.73
33.46
9.06
4.72
9.84
15.35
1.57
11.81
24.80
16.14
51.42
16.73
37.99
20.87
40.16
10.63
5.91
11.81
18.90
1.97
13.19
26.38
18.50
61.97
16.73
37.99
20.87
40.16
10.63
5.91
11.81
18.90
1.97
14.76
29.53
20.08
64.41
21.65
21.65
46.65
46.65
25.20
25.20
49.21
49.21
13.78
13.78
7.87
7.87
13.78
13.78
21.65
21.65
2.36
2.36
18.70
17.72
35.43
35.43
22.44
22.44
76.34
78.23
High Speed Shaft
Low Speed Shaft

S
SA
SB
SC
SD
SE
SF
SG
SH
9.0551 h7
9.49
1.97 11.02 0.39 M24 1.97 5.91 2.95
9.0551 h7
9.49
1.97 11.02 0.39 M24 1.97 5.91 2.95
11.4173 h7 11.89 2.48 15.75 0.49 M24 1.97 7.87 3.94

11.4173 h7 11.89 2.48 15.75 0.49 M24 1.97 7.87 3.94
14.1732 h7 14.76 3.15 20.47 0.59 M24 1.97 8.66 4.33
14.1732 h7 14.76 3.15 20.47 0.59 M24 1.97 8.66 4.33
T
2.1654 m6
1.5748 k6
2.1654 m6
1.9685 k6
2.7559 m6
2.1654 m6
3.1496 m6
2.5591 m6
4.3307 m6
2.9528 m6
4.3307 m6
2.9528 m6
TA
2.32
1.69
2.32
2.11
2.93
2.32
3.35
2.72
4.57
3.15
4.57
3.15
TB
0.63
0.47
0.63
0.55
0.79
0.63
0.87
0.71
1.10
0.79
1.10
0.79
TC
5.91
5.51
5.91
5.51
7.09
6.30
7.09
6.30
TE
M20
M16
M20
M16
M20
M20
M24
M20
M24
8.66
M20
8.66
VA
VB
VC
VD
TF
1.65
57.24
M30 11.02 7.87 17.01 1.97 18.58
1.42
56.85
1.65 M30
59.53
12.40 7.87 17.80 1.97 18.70
1.42
59.29
67.91
1.65 M42 13.19 10.24 21.65 2.95 20.63
67.13
72.24
1.65 M42 14.76 10.24 23.23 2.95 21.50
71.46
1.97
M48 17.72 11.02 25.39 3.15 26.10 84.65
1.65
1.97
M48 17.72 11.02 27.28 3.15 26.10 85.63
1.65
O
40.51
40.12
42.80
42.56
47.83
47.05
52.17
51.38
60.04
61.02
Approx
Wt
lb
8.37
5062
0.00
8.46
5745
0.00
9.65
9052
0.00
10.43
9967
0.00
11.61 15701
11.61 16292
160 (161-110)
Type DBF4 Quadruple Reduction

ED
EC
N
S
SF (DEEP)
SH
12
0
SB
SA
SG
T
TB
TA
A
USABLE
LENGTH
TE (TAPPED HOLE)
TF (DEPTH)
TC
2 KEYS
120 APART
SD
SC
EB
E
V
B
USABLE
LENGTH
BOTH
ENDS
CA
BA
EE
EA
W
DRIVE
SIZE
M1160
M1170
M1180
M1190
M1200
M1210
DRIVE
SIZE
M1160
M1170
M1180
M1190
M1200
M1210
Ratios
160.0-400.0
450.0-630.0
160.0-400.0
450.0-630.0
160.0-400.0
450.0-630.0
160.0-400.0
450.0-630.0
160.0-560.0
160.0-630.0
5.91
5.51
6.10
5.91
7.09
6.30
7.68
6.89
9.45
9.45
Ratios
160.0-400.0
450.0-630.0
160.0-400.0
450.0-630.0
160.0-400.0
450.0-630.0
160.0-400.0
450.0-630.0
160.0-355.0
400.0-560.0
160.0-400.0
450.0-630.0
BA
CA
EA
EB
EC
ED
EE
11.81
27.95
13.98
11.02
22.05
54.72
2.56 H9
30.83
1.38
51.18
15.94
50.51
11.81
27.95
13.98
11.81
24.80
54.72
2.56 H9
31.73
1.38
51.18
16.14
51.42
16.73
34.25
17.13
13.19
26.38
66.93
2.76 H9
36.26
1.57
62.99
18.50
61.97
16.73
34.25
17.13
14.76
29.53
66.93
2.76 H9
38.70
1.57
62.99
20.08
64.41
21.65
21.65
42.91
42.91
21.46
21.46
18.70
17.72
35.43
35.43
75.20
75.20
2.95 H9
2.95 H9
44.69
46.57
2.36
2.36
70.87
70.87
22.44
22.44
76.34
78.23
High Speed Shaft
Low Speed Shaft

S
SA
SB
SC
SD
SE
SF
SG
SH
9.0551 h7
9.49
1.97
11.02
0.39
M24
1.97
5.91
2.95
9.0551 h7
9.49
1.97
11.02
0.39
M24
1.97
5.91
2.95
11.4173 h7
11.89
2.48
15.75
0.49
M24
1.97
7.87
3.94
11.4173 h7
11.89
2.48
15.75
0.49
M24
1.97
7.87
3.94
14.1732 h7
14.76
3.15
20.47
0.59
M24 1.97 8.66
4.33
14.1732 h7
14.76
3.15
20.47
0.59
M24 1.97 8.66
4.33
T
2.1654 m6
1.5748 k6
2.1654 m6
1.9685 k6
2.7559 m6
TA
2.32
1.69
2.32
2.11
2.93
TB
0.63
0.47
0.63
0.55
0.79
2.1654 m6
3.1496 m6
2.5591 m6
4.3307 m6
2.9528 m6
4.3307 m6
2.9528 m6
2.32
3.35
2.72
4.57
3.15
4.57
3.15
0.63
0.87
0.71
1.10
0.79
1.10
0.79
TC
5.91
5.51
5.91
5.51
7.09
6.30
7.09
6.30
8.66
8.66
TE
M20
M16
M20
M16
M20
TF
1.65
1.42
1.65
1.42
1.65
6.30
M20
1.65
M24
M20
M24
M20
1.97
1.65
1.97
1.65
O
40.51
40.12
42.80
42.56
47.83
47.05
52.17
51.38
60.04
61.02
X
95.24
8.37
94.84
12.40 97.52
8.46
97.28
114.76
13.19
9.65
113.98
119.09
14.76
10.43
118.31
11.02
Approx
Wt
lb
5104
5811
8977
9892
17.72 135.24 11.61
15611
17.72 136.22 11.61
16202
(161-110) 161
Type DBP4 Quadruple Reduction

HOLLOW BORE AND DRIVEN SHAFT DETAI L
NA
SA
D
BA
SD SC SB
SE
SF
DRIVEN SHAFT
HOLLOW BOR E
T
TB
Refer to Page 163 for torque arm dimensions.

A
USABLE
LENGTH
TA
TE (TAPPED HOLE)
TF (DEPTH)
TC
W
O
CA
CA
E
BA
V
CA
CA
BOTH
ENDS
DRIVE
SIZE
M1160
M1170
M1180
M1190
M1200
M1210
DRIVE
SIZE
M1160
M1170
M1180
M1190
M1200
M1210
Ratios
160.0-400.0
450.0-630.0
160.0-400.0
450.0-630.0
160.0-400.0
450.0-630.0
160.0-400.0
450.0-630.0
160.0-355.0
400.0-560.0
160.0-400.0
450.0-630.0
Ratios
160.0-400.0
450.0-630.0
160.0-400.0
450.0-630.0
160.0-400.0
450.0-630.0
160.0-400.0
450.0-630.0
160.0-560.0
160.0-630.0
5.91
5.51
6.10
5.91
7.09
6.30
7.68
6.89
9.45
9.45
BA
CA
NA
27.95
13.98
11.02
22.05
15.94
48.27
27.95
13.98
11.81
24.80
16.14
49.17
34.25
17.13
13.19
26.38
18.50
55.67
34.25
17.13
14.76
29.53
20.08
58.11
42.91
42.91
21.46
21.46
18.70
17.72
35.43
35.43
22.44
22.44
66.46
68.35
Low Speed Shaft

SC
High Speed Shaft
Driven Shaft
SA
SB
SD
SE
SF
3.98
9.06
11.0236 f7
9.0551 H7 4.7244 H7
9.0551 g6 4.7244 f6
3.98
9.06
11.0236 f7
9.0551 H7 4.7244 H7
9.0551 g6 4.7244 f6
6.10
11.81
14.1732 f7 11.6142 H7 8.2677 H7 11.6142 g6 8.2677 f6
6.10
11.81
14.1732 f7 11.6142 H7 8.2677 H7 11.6142 g6 8.2677 f6
6.89
13.19
15.3543 f7 12.5984 H7 7.4803 H7 12.5984 g6 7.4803 f6
6.89
13.19
15.3543 f7 12.5984 H7 7.4803 H7 12.5984 g6 7.4803 f6
T
2.1654 m6
1.5748 k6
2.1654 m6
1.9685 k6
2.7559 m6
2.1654 m6
3.1496 m6
2.5591 m6
4.3307 m6
2.9528 m6
4.3307 m6
2.9528 m6
TA
2.32
1.69
2.32
2.11
2.93
2.32
3.35
2.72
4.57
3.15
4.57
3.15
TB
0.63
0.47
0.63
0.55
0.79
0.63
0.87
0.71
1.10
0.79
1.10
0.79
TC
5.91
5.51
5.91
5.51
7.09
6.30
7.09
6.30
8.66
8.66
TE
M20
M16
M20
M16
TF
1.65
1.42
1.65
1.42
M20
1.65
13.19
M20
1.65
14.76
M24
M20
M24
M20
1.97
1.65
1.97
1.65
11.02
12.40
O
40.51
40.12
42.80
42.56
47.83
47.05
52.17
51.38
60.04
61.02
54.49
8.37
54.09
56.77
8.46
56.54
64.96
9.65
64.17
69.29
10.43
68.50
Approx
Wt
lb
5340
6047
9449
10364
17.72
81.50 11.61
16213
17.72
82.48 11.61
16804
162 (161-110)
Type DHF
& DBF Quadruple Reduction
Torque Arm/Dimensions Inches

ED
EC
TORQUE ARM
CAN BE MOUNTED
IN EITHER POSITION
L
J
EB
K
E
EA
DRIVE
SIZE
EA
EB
EC
ED
M1160
M1170
M1180
M1190
M1200
M1210
51.18
51.18
62.99
62.99
70.87
70.87
54.72
54.72
66.93
66.93
75.20
75.20
2.56 H9
2.56 H9
2.76 H9
2.76 H9
2.95 H9
2.95 H9
30.83
31.61
36.26
38.70
44.69
46.57
1.38
1.38
1.57
1.57
2.36
2.36
5.12
5.12
5.51
5.51
5.91
5.91
3.54
3.54
3.94
3.94
4.33
4.33
5.71
5.71
5.12
5.12
5371
5.71
Approx
Wt
lb
403
403
591
591
1157
1157
++ Dimensions are for reference only and are subject to change without notice unless certified.
(161-110) 163
Availability & Compatibility of Accessories

Type DHL1 Sizes M1130-M1200
DHL1
Electric Fan
High Speed
End
Electric Fan
Low Speed
End
Top Motor
Mount
End Motor
Mount
Oil Sight
Gauge
Oil Drain
Valve
Oil Drain
Valve & Sight
Gauge
AirMax
Breather &
Sealed Dipstick
Electric Fan, High Speed End

Electric Fan, Low Speed End
...
...
...
...
...
OK
OK
OK
Top Motor Mount

End Motor Mount
Oil Sight Gauge
Oil Drain Valve
Oil Drain Valve & Sight Gauge
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
...
...
OK
OK
OK
...
...
OK
OK
OK
OK
OK
OK
OK
...
OK
...
OK
OK
OK
OK
OK
...
...
OK
OK
OK
OK
...
...
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
...
Not available on M1190 & M1200 drives.

Input must be on opposite side of housing from output.
++ Accessories must be mounted on opposing sides of the housing.
Type DHC1 Sizes M1130-M1190

DHC1
Electric Fan
High Speed
End
Electric Fan
Low Speed
End
Pump & Cooler
Oil Sight
Gauge
Oil Drain
Valve
Oil Drain
Valve & Sight
Gauge
AirMax
Breather &
Sealed Dipstick
Cooling
Tubes
Electric Fan, High Speed End

Electric Fan, Low Speed End
...
...
...
...
...
...
OK
OK
Pump & Cooler
...
OK
OK
OK
OK
...
OK
OK
OK
OK
...
...
...
...
OK
...
...
OK
...
OK
OK
OK
...
OK
...
...
OK
OK
OK
...
...
...
...
OK
OK
OK
OK
OK
OK
OK
...
...
...
...
OK
OK
OK
OK
...
...
...
OK
OK
OK
OK
...
Oil Sight Gauge

Oil Drain Valve
Oil Drain Valve & Sight Guage
Cooling Tubes

Accessories must be mounted on opposing sides of the housing.
164 (161-110)

Type DH2
& DH3 Sizes M1130-M1210
DH2 & DH3
Backstop
Shaft
Fan
Electric
Fan
H.S. End
Electric
Fan
L.S. End
Torque
Arm
Rod End
Backstop
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
Shaft Fan
OK
...
...
OK
OK
OK
OK
OK
...
OK
...
...
OK
...
...
...
...
OK
OK
OK
...
OK
OK
OK
OK
OK
...
OK
...
...
OK
OK
...
OK
...
OK
OK
...
OK
OK
...
OK
OK
OK
OK
OK
...
OK
...
OK
OK
OK
OK
Electric Fan,
H.S. End
Electric Fan,
L.S. End
Torque Arm
Rod End
Torrque Arm
Tie Rod
Motor Adapter
Motor Bracket
Top Motor Mount
End Motor Mount

Pump & Cooler
Oil Sight Gauge
Oil Drain Valve
Oil Drain Valve &
Sight Gauge
AirMax Breather &
Sealed Dipstick
Torque
Top
End
Motor
Motor
Pump &
Arm Adapter
Motor
Motor
Bracket
Tie Rod
Mount Mount Cooler
Oil Drain AirMax

Valve & Breather
Sight & Sealed
Gauge Dipstick
Oil
Sight
Gauge
Oil
Drain
Valve
OK
OK
OK
OK
OK
OK
...
OK
OK
OK
OK
...
OK
...
OK
OK
OK
OK
OK
OK
OK
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
...
...
...
...
OK
OK
OK
OK
OK
OK
OK
OK
...
...
...
...
OK
OK
OK
OK
OK
...
OK
...
OK
OK
OK
OK
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
...
...
OK
OK
OK
...
...
OK
OK
OK
...
...
...
OK
OK
...
...
...
OK
OK
...
...
...
...
...
OK
OK
...
...
OK
OK
OK
...
OK
...
OK
OK
...
...
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
...
...
...
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
...

Not available on M1170 thru M1210 drives.
zz Not available on M1200 & M1210 drives.
Input must be on opposite side of housing from output when mounted on L.S. end.
44 Verify sheave and sprocket clearence for accessory if mounted on input side.
Type DV2,
DV3, & DX3 Sizes M1130-M1210
DV2, DV3, & DX3
Shaft
Fan
Electric
Fan
Motor
Adapter
Oil Sight
Gauge
Oil Drain
Valve
Oil Drain
Valve & Sight
Gauge
AirMax
Breather &
Sealed Dipstick
Shaft Fan
Electric Fan
Motor Adapter
...
...
...
...
...
...
OK
OK
OK
OK
OK
OK
OK
OK
...
OK
OK
OK
...
OK
OK
OK
...
OK
OK
OK
OK
...
OK
...
OK
OK
...
...
OK
...
...
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
...
Oil Sight Gauge

Oil Drain Valve
Not available on DV2 or DV3 drives.

(161-110) 165

Type DHC
& DBC Sizes M1220-M1250
DHC & DBC
Backstop
Torque
Arm
(NonAdjustable
Shaft
Fan
Electric
Fan
Alignment Free
Bell Housing
w/Torque Arm
Swing Base
& Torque Arm
Pump &
Cooler
Oil
Sight
Gauge
Oil
Drain
Valve
Oil Drain
Valve &
Sight
Gauge
AirMax
Breather
& Sealed
Dipstick
Internal
Oil Pump
Backstop
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Torque Arm
(Non-Adjustable)
OK
...
OK
OK
...
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
...
OK
OK
OK
OK
OK
OK
OK
OK
...
OK
OK
OK
OK
OK
Shaft Fan
OK
OK
Electric Fan
OK
OK
OK
Alignment Free
Bell Housing
w/Torque Arm
OK
...
OK
OK
...
...
...
OK
OK
OK
OK
OK
Swing Base
& Torque Arm
Pump & Cooler
OK
...
OK
OK
...
...
OK
OK
OK
OK
OK
OK
OK
OK
...
...
...
OK
...
OK
Oil Sight Gauge

Oil Drain Valve
Oil Drain Valve &
Sight Gauge
AirMax Breather &
Sealed Dipstick
Internal
Oil Pump
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
...
OK
OK
OK
...
OK
...
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
...
...
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
...
DH drives only. Input must be on opposite side of drive from output.

Not available on DH drives.
zz Not available on M1240DB & M1250 drives.
Not available on high speed end of DB drives
++ Not available on high speed end or top mount with shaft fan.
44 Accessories on DH drives must be mounted on opposing sides of thehousing.
Shaft fan is unique to the alignment free bellhousing.
ss Accessories on DB drives must be mounted on opposing ends of the housing.
ww Multiple shaft fans are not available on DB drives.
Type DBL2 Sizes M1130-M1200

DBL2
Shaft
Fan
Electric
Fan
Motor
Adapter
Motor
Bracket
Oil Sight
Gauge
Oil Drain
Valve
Oil Drain
Valve & Sight
Gauge
AirMax
Breather &
Sealed Dipstick
Shaft Fan
Electric Fan
...
OK
...
...
OK
OK
OK
OK
...
OK
OK
...
OK
...
...
OK
...
...
OK
OK
OK
...
OK
...
...
OK
OK
OK
OK
...
OK
OK
...
OK
...
OK
OK
OK
OK
OK
...
...
OK
...
OK
OK
...
...
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
...
Motor Adapter
Motor Bracket
Oil Sight Gauge
Oil Drain Valve

Must be mounted on the low speed end of housing.
++ Accessories must be mounted on opposing sides of housing.
166 (161-110)

Type DB3 & DZ3 Sizes M1130-M1210
DB3 & DZ3
Backstop
Shaft
Fan
Alignment Free Swing Base

Torque
Oil
Oil
Electric
Motor
Motor
Bell Housing
Pump &
Arm
&
Sight Drain
Fan Rod End Adapter Bracket

with
Cooler
Gauge Valve
Torque Arm Torque Arm
Oil Drain
Valve &
Sight
Gauge
AirMax
Breather
& Sealed
Dipstick
Backstop
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Shaft Fan
OK
...
OK
...
...
...
OK
OK
...
OK
OK
OK
OK
Electric Fan
Torque Arm
Rod End
Motor Adapter
OK
OK
...
OK
OK
OK
OK
OK
...
...
OK
...
OK
OK
...
OK
...
OK
OK
...
...
OK
OK
OK
OK
OK
OK
...
OK
OK
...
...
...
...
OK
OK
OK
OK
OK
Motor Bracket
Alignment Free
Bell Housing
w/Torque Arm
Swing Base
& Torque Arm
Pump & Cooler
Oil Sight Gauge
OK
...
OK
OK
...
...
...
...
OK
OK
OK
OK
OK
OK
OK
OK
...
...
...
...
...
OK
OK
OK
OK
OK
OK
OK
OK
...
...
...
...
...
OK
OK
OK
OK
OK
OK
...
...
OK
OK
OK
OK
OK
...
...
...
...
OK
OK
OK
OK
OK
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
...
...
...
OK
OK
...
...
...
OK
OK
OK
OK
...
OK
OK
OK
OK
OK
...
...
...
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
...
Oil Drain Valve

Oil Drain Valve &
Sight Gauge
AirMax Breather &
Sealed Dipstick

Not available on M1130 drives.
zz Not available on M1170 thru M1210 drives.
Not available on DZ drives.
Must be mounted on the low speed end of housing.
44 Shaft fan is unique to the Alignment Free bellhousing.
Type DH4
& DB4 Sizes M1160-M1210
DH4 & DB4
Backstop
DH
Shaft
Fan
DB
Shaft
Fan
Backstop
...
...
OK
Electric Electric
Fan
Fan
H.S. End L.S. End
OK
OK
Motor
Adapter
Motor
Bracket
Top
Motor
Mount
...
...
OK
OK
OK
OK
End
Oil
Pump & Sight
Motor
Cooler
Mount
Gauge
OK
Oil
Drain
Valve
Oil Drain
Valve &
Sight
Gauge
AirMax
Breather
& Sealed
Dipstick
OK
OK
OK
DH Shaft Fan
...
...
...
...
OK
...
...
OK
...
OK
OK
OK
OK
DB Shaft Fan
Electric Fan,
H.S. End
Electric Fan,
L.S. End
OK
...
...
...
OK
...
...
...
...
...
OK
OK
OK
OK
OK
...
...
...
OK
...
...
...
OK
...
OK
OK
OK
OK
OK
OK
OK
OK
...
OK
OK
OK
...
...
OK
OK
OK
OK
Motor Adapter
...
...
...
...
OK
...
...
...
...
OK
OK
OK
OK
OK
Motor Bracket
Top Motor Mount
...
...
...
...
OK
...
...
...
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
...
OK
...
OK
OK
...
...
...
OK
OK
...
OK
...
OK
OK
OK
...
...
OK
OK
...
...
OK
OK
OK
...
...
OK
OK
OK
...
...
...
OK
OK
...
...
...
OK
OK
...
...
...
...
...
OK
OK
...
...
OK
OK
OK
...
OK
...
OK
OK
...
...
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
...
...
...
...
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
...
End Motor Mount

Pump & Cooler
Oil Sight Gauge
Oil Drain Valve
Oil Drain Valve &
Sight Gauge
AirMax Breather &
Sealed Dipstick
Input must be on opposite side of drive from output on DH drives.

Not available on DB drives.
zz Not available on M1170 thru M1210 DH & DB drives.
Not available on M1200DH & M1210DH drives.
++ Not available on output side of housing.
44 Not available on DH drives.
Accessories must be mounted on opposing sides of housing on DH drives.
ss Verify sheave and sprocket clearence for accessory if mounted on input side.
ww Not available on DB drives.
(161-110) 167
Type DHT,
DBT & DZT Double or Triple Reduction Gear Drive
TA Taper Bushing & Driven Shaft/Dimensions Inches
Driven Shaft Detail

SL
W (KW Y)
L(KWY)
DA
S (TAPPED HOLE)
T (DEPTH)
H (KW Y)
Thin-wall bushing
PA
DRIVEN SHAFT
DRIVEN
SHAFT
BEARING
.20
CLEARANCE
SET SCREW
NUT
HOLLOW SHAFT
KEY (FURNISHED)
B
C
SEE DRIVEN SHAFT

AND KEYWAY DETAIL
DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
Bushing
Bushing
Size
2.938
3.188
3.438
3.438
3.938
4.188
3.938
4.188
4.438
4.438
4.938
4.938
5.438
5.938
5.938
6.000
6.500
5.938
6.000
6.500
6.938
7.000
RETAINING
RING
DRIVEN
SHAFT
Driven Shaft
7.087
2.55
10.91
7.087
3.00
11.89
7.087
3.19
12.09
7.874
2.33
12.83
9.843
2.33
13.23
9.843
2.69
14.69
11.024
2.59
15.28
DA
2.9375
3.1875
3.4375
3.4375
3.9375
4.1875
3.9375
4.1875
4.4375
4.4375
4.9375
4.9375
5.4375
5.9375
5.9375
6.0000
6.5000
5.9375
6.0000
6.5000
6.9375
7.0000
Tolerance
SL
Min
+.000 .006
13.43
+.000 .006
+.000 .007
+.000 .006
+.000 .007
15.20
15.98
+.000 .007
17.87
+.000 .007
17.17
+.000 .007
+.000 .008
19.80
+.000 .007
+.000 .008
21.61
WxH
.750 x .375
.750 x .375
.875 x .4375
.875 x .4375
1.000 x .500
1.000 x .500
1.000 x .500
1.000 x .500
1.000 x .500
1.000 x .500
1.250 x .625
1.250 x .625
1.250 x .625
1.500 x .750
1.500 x .750
1.500 x .750
1.500 x .750
1.500 x .750
1.500 x .750
1.500 x .750
1.750 x .750
1.750 x .750
zz Check strength of driven shaft.

44 A trapped keyway is not allowed on the keyway shown. An open keyway must extend to the end of the driven shaft.
168 (161-110)
TAPERED
BUSHING
PA
11.18
9.51
.750-10 UNC
1.50
12.55
10.50
1.000-8 UNC
2.00
13.15
10.94
1.000-8 UNC
2.00
16.02
11.93
1.000-8 UNC
2.00
15.44
11.81
1.125-7 UNC
2.25
17.72
13.19
1.125-7 UNC
2.25
19.76
13.98
1.125-7 UNC
2.25
Wt
Lb
28
25
22
40
32
26
44
40
35
55
43
74
60
47
79
75
60
120
116
97
83
80
Type DHT
& DBT Double or Triple Reduction
Driven Shaft Recommendations Using TA Taper Bushing With Keeper Plate

Sizes M1200-M1210/Dimensions Inches
B
W (KWY)
L(KWY)
H (KWY)
V (RADIUS MAX)
S (TAPPED HOLE)
T (DEPTH )
DB (MIN)
DA
FIGURE 1 (SIZES M1130-M1190)

W (KWY)
H (KWY)
THRUST
PLATE
FASTENER
3- S (TAPPED HOLE)
T (DEPTH )
EQUALLY SPACED
ON U DIA BOL T CIRCLE
FIGURE 2 (SIZES M1200-M1210)
Keyway
Retaining Ring
DRIVE
SIZE
TCB
Kit
DA
DB
M1200/M1210
M1200/M1210
...
...
15.630
15.630
16.805
16.805
7.500
8.000
8.25
8.75
Groove
F
7.180
7.660
G
0.209
0.209
Mfg No.
Smalley WST-750 7.930

Smalley WST-800 8.410
Shaft diameter tolerance is +0.000, 0.008.
Refer to ANSI B17.1 for inch keyway depths and widths.
Max
OD
Shaft End
L
(Min)
Figure
No.
T
(Min)
1.750
2.000
0.750
0.750
14.81
14.81
2
2
1.250-7 UNC
1.250-7 UNC
2.500
2.500
4.750
4.750
V
0.15
0.15
(161-110) 169
Type DHJ,
DBJ, DVJ & DXJ
Hollow Low Speed Shaft - Shrink Disc Mounted/Dimensions Inches
The drive package includes the keeper plate and keeper plate retention hardware
.38 mm R MAX
L3
AJ
D
L2
INSTALLATION
A THREADED ROD IS INSERTED THROUGH
THE KEEPER PLATE CENTER HOLE AND INTO
THE TAPPED HOLE IN THE END OF THE DRIVEN
SHAFT. THE THREADED ROD, WITH NUT AS
SHOWN, ARE USED TO AID ASSEMBLY.
L1
INSTALLATION AND REMOVAL CAN BE

ASSISTED THROUGH THE USE OF
ADDITIONAL HARDWARE ITEMS
SHOWN SHADED (CUSTOMER SUPPLIED)
Z - QUANTITY
ZA - DIA. UNC TAPPED HOLES IN HOLLOW SHAFT
ZB - DEEP
Y - DIA. BOLT CIRCLE - EQUALLY SPACED HOLES
FOR KEEPER PLATE RETENTION
ASSEMBLED
Hollow Low Speed Shaft Dimensions Inches

DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
AJ
L1
L2
L3
ZA
ZB
3.3465
3.9370
4.3307
5.1181
5.5118
6.4961
7.0866
7.8740
7.8740
3.465
4.055
4.449
5.236
5.630
6.614
7.205
8.071
8.071
2.362
2.559
2.756
3.543
3.543
4.331
4.724
5.118
5.008
2.362
2.559
2.756
3.543
3.543
4.331
4.724
5.709
5.709
15.512
17.677
19.191
20.628
21.181
24.724
26.694
29.921
29.921
3.543
4.134
4.528
5.315
5.709
6.693
7.283
8.268
8.268
8
8
8
8
8
6
6
6
6
M6 x 1-6H
M6 x 1-6H
M8 x 1.25-6H
M10 x 1.50-6H
M10 x 1.50-6H
M12 x 1.75-6H
M12 x 1.75-6H
M12 x 1.75-6H
M12 x 1.75-6H
0.472
0.472
0.630
0.787
0.787
1.102
1.102
0.945
0.945
3.780
4.331
4.803
5.787
6.181
7.520
8.268
9.055
9.055
J7 tolerance.
H7 tolerance.
GAP (WHEN ASSEMBLED)
S - TAP
T - DEEP
IN END OF
DRIVEN SHAFT
LC
LA
LB
DB
DP
FASTENER AND FLAT WASHER

SUPPLIED BY CUSTOMER
REMOVAL
A FASTENER (LARGER DIA THAN THE
THREADED ROD) IS THREADED INTO THE TAPPED
CENTER HOLE OF THE KEEPER PLATE AND IS USED TO
SEPARATE THE DRIVEN SHAFT FROM THE HOLLOW
LOW SPEED SHAFT OF THE GEAR DRIVE.
DC
DA
DD
RADIUS
RADIUS
RADIUS
Driven Shaft Recommended Dimensions Inches

DRIVE
SIZE
DA
DB
DC
Min
DD
Radius
Max
LA
LB
LC
DP
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
3.5433
4.1339
4.5276
5.3150
5.7087
6.6929
7.2835
8.2677
8.2677
3.3465
3.9370
4.3307
5.1181
5.5118
6.4961
7.0866
7.8740
7.8740
4.134
4.724
5.118
5.906
6.299
7.283
7.874
9.055
9.055
3.465
4.134
4.449
5.236
5.630
6.614
7.205
8.071
8.071
0.118
0.118
0.118
0.118
0.118
0.118
0.118
0.118
0.118
2.126
2.323
2.520
3.307
3.307
4.094
4.488
4.882
4.882
2.598
2.795
2.992
3.780
3.780
4.567
4.961
5.472
5.472
15.354
17.520
19.016
20.472
21.024
24.567
26.535
29.764
29.764
4.33
4.84
5.47
6.46
6.85
8.62
9.25
10.16
10.16
0.591
0.591
0.787
0.787
0.787
0.787
0.748
0.984
0.984
1.22
1.34
1.54
1.54
1.69
1.89
1.85
2.09
2.09
M20 x 2.5-6H
M24 x 3-6H
M24 x 3-6H
M24 x 3-6H
M30 x 3.5-6H
M36 x 4-6H
M36 x 4-6H
M36 x 4-6H
M36 x 4-6H
1.654
1.969
1.969
1.969
2.362
2.913
2.913
2.913
2.913
h6 tolerance.
g6 tolerance.
zz c11 tolerance.
170 (161-110)
Hole
Fastener Tapped
in Center of
Length Keeper
Plate
2.36
2.76
2.95
2.95
3.15
3.54
3.54
3.94
3.94
M24 x 3-6H
M30 x 3.5-6H
M30 x 3.5-6H
M36 x 4-6H
M42 x 4.5-6H
M48 x 5-6H
M48 x 5-6H
M48 x 5-6H
M48 x 5-6H
Gap
0.157
0.157
0.157
0.157
0.157
0.157
0.157
0.157
0.157
Type DVM
& DXM
Hollow Low Speed Shaft With Keeper Plate/Dimensions Inches

L4
L3
STANDARD
ASSEMBLY
GAP
L5
U
D3
D2
SNAP RING
L6
L7

DRIVE
SIZE
M1150
M1160
M1170
M1180
M1190
M1200
M1210
Shaft-Diameters
(H7)
(D10)
UF
UG
4.724
5.315
5.906
6.693
7.283
8.661
8.661
1.260
1.417
1.417
1.575
1.772
1.969
1.969
5.016
5.646
6.236
7.063
7.693
9.110
9.110
D2
+0.009
0.000
D3
L3
5.906 6.693 10.669

6.575 7.087 11.457
7.283 7.874 11.378
8.071 8.661 11.457
8.937 9.449 14.764
9.449 11.024 15.906
9.449 11.024 15.906
L4
L5
L6
L7
4.094
4.409
4.213
7.165
7.559
6.693
6.693
1.772
1.772
2.244
2.244
2.244
2.677
2.677
17.913
19.823
19.252
23.268
25.020
26.614
26.614
19.685
21.594
21.496
25.512
27.264
29.291
29.291
GAP
Gap Between
Shaft & Plate
Std
Assy
Opt
Assy
0.197
0.197
0.197
0.197
0.197
0.197
0.197
1.575
1.890
2.480
2.441
2.480
2.874
2.874
OPTIONAL
ASSEMBLY
KEYED HOLLOW
L.S. SHAFT DETAIL
UF
UG
H (Keyway)
GAP
W (Keyway)
R
1-HOLE
S-TAP,
T-DEEP
LD
KEY
LB
LA
SIZES M1150-M1190
LC
RADIU S
L (Keyway)
(full radius ends)
H (Keyway)
W (Keyway)
D .031
L (Key)
H (Key)
DA
W (Key)
3-HOLES
S-TAP,
T-DEEP EQUALLY
SPACED ON U1 -DIA
SIZES M1200-M1210

Shaft End
Shaft
DRIVE
SIZE
M1150
M1160
M1170
M1180
M1190
M1200
M1210
(g6)
DA
Min
Radius
Max
4.724 5.906 0.118

5.315 6.496 0.118
5.906 7.480 0.118
6.693 8.268 0.118
7.283 9.055 0.118
8.661 10.433 0.118
8.661 10.433 0.118
LD
17.717
19.646
19.055
23.071
24.803
26.417
26.417
LA
3.937
4.213
4.016
7.008
7.402
8.661
8.661
LB
2.047
2.323
1.575
4.528
4.921
3.937
3.937
LC
2.913
2.992
2.953
4.921
4.882
6.693
6.693
+0.000
0.005
0.925
0.925
0.925
0.886
0.886
1.476
1.476
1.870
1.870
2.106
2.067
2.067
2.657
2.657
Snap Ring
(L.S. Shaft
Down Only)
(mm)
150
170
185
205
225
240
240
Fastener Length
Key
U1
Shaft
Down
Shaft
Up
(N9)
M24
M24
M30
M30
M30
M24
M24
1.890
1.890
2.362
2.362
2.362
2.362
2.362
...
...
...
...
...
4.724
4.724
2.559
2.559
2.756
2.756
2.756
3.543
3.543
4.331
4.331
5.118
5.118
5.118
4.331
4.331
1.260
1.417
1.417
1.575
1.772
1.969
1.969
0.433
0.472
0.472
0.512
0.591
0.669
0.669
13.858
15.591
15.591
15.748
17.520
17.717
17.717
1.260
1.417
1.417
1.575
1.772
1.969
1.969
0.709
0.787
0.787
0.866
0.984
1.102
1.102
12.598
14.173
14.173
14.173
15.748
15.748
15.748
zz Rotor clip DHO series or equivalent.
Keyway tolerance for M1150 is +0.008/0.000; for M1160 thru M1210 is +0.012/0.000.
Keyway
(161-110) 171
Type DHQ
& DBQ
Hollow Low Speed Shaft With Keeper Plate/Dimensions Inches

L4
L3
GAP
L5
SNAP RING
D3
D2
L6
L7

DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
L3
L4
L5
L6
L7
Gap
Between
Shaft &
Plate
2.362
2.559
2.756
3.543
3.543
4.331
4.724
5.118
5.118
4.567
4.213
4.685
4.685
4.646
7.480
7.913
6.969
6.969
2.598
2.047
2.362
2.047
2.677
2.559
2.598
2.953
2.953
11.024
13.543
14.528
16.181
15.827
18.189
19.961
21.811
21.811
13.622
15.591
16.890
18.228
18.504
20.748
22.598
24.764
24.764
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
0.197
Shaft-Diameters
D2
(H7)
(D10)
UF
UG
+0.009
0.000
D3
3.740
4.331
4.724
5.315
5.906
6.693
7.283
8.661
8.661
0.984
1.102
1.260
1.417
1.417
1.575
1.772
1.969
1.969
3.953
4.583
5.016
5.646
6.236
7.063
7.693
9.110
9.110
4.528
5.118
5.906
6.575
7.283
8.071
8.937
9.449
9.449
5.118
5.906
6.693
7.087
7.874
8.661
9.449
11.024
11.024
KEYED HOLLOW
L.S. SHAFT DETAIL
UF
UG
U
H (Keyway)
GAP
W (Keyway)
R
1-HOLE
S-TAP,
T-DEEP
LD
KEY
LB
LA
SIZES M1150-M1190
LC
RADIU S
L (Keyway)
(full radius ends)
H (Keyway)
W (Keyway)
D .031
L (Key)
H (Key)
DA
W (Key)
3-HOLES
S-TAP,
T-DEEP EQUALLY
SPACED ON U1 -DIA
SIZES M1200-M1210

Thrust Plate (Keeper Plate)
Shaft
DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
(g6)
DA
Min
3.740
4.331
4.724
5.315
5.906
6.693
7.283
8.661
8.661
4.724
5.512
5.906
6.496
7.480
8.268
9.055
10.433
10.433
Radius
Max
LD
0.118
0.118
0.118
0.118
0.118
0.118
0.118
0.118
0.118
10.827
13.346
14.331
15.984
15.630
17.992
19.803
21.614
21.614
LA
3.346
3.937
3.937
4.213
4.016
7.008
7.402
8.661
8.661
LB
1.772
1.969
1.929
2.244
1.575
4.528
4.921
3.622
3.622
LC
0.984
1.181
1.575
1.772
0.984
1.181
1.496
1.575
1.575
+0.000
0.005
0.925
0.925
0.925
0.925
0.925
0.886
0.886
1.476
1.476
1.870
1.870
1.870
1.870
2.106
2.067
2.067
2.657
2.657
Key
Snap Ring
(mm)
U1
Fastener
Length
(N9)
115
130
150
167
185
205
227
240
240
M24
M24
M24
M24
M30
M30
M30
M30
M30
1.890
1.890
1.890
1.890
2.362
2.362
2.362
2.362
2.362
...
...
...
...
...
...
...
3.346
3.346
2.559
2.559
2.559
2.559
2.756
2.756
2.756
3.543
3.543
0.984
1.102
1.260
1.417
1.417
1.575
1.772
1.969
1.969
0.354
0.394
0.433
0.472
0.472
0.512
0.591
0.669
0.669
8.858
10.945
11.102
12.441
14.016
15.748
17.520
17.717
17.717
0.984
1.102
1.260
1.417
1.417
1.575
1.772
1.969
1.969
0.551
0.630
0.709
0.787
0.787
0.866
0.866
0.866
0.866
7.874
9.843
9.843
11.024
12.598
14.173
15.748
15.748
15.748
zz Rotor clip DHO series or equivalent.
Keyway tolerance for M1130 thru M1150 is +0.008/0.000; for M1160 thru M1210 is +0.012/0.000.
172 (161-110)
Keyway
Type
DHC2 & 3 Sizes M1130-M1210
Shaft Driven Fan Clearance/Dimensions Inches
FE
FF
FG
SHAFT EXTENSION
WITH SHAFT COVER
REMOVED
FB
FA
FC
FD
WITH SHAFT
COVER
Double Reduction
DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
Ratios
6.3-16.0
18.0-28.0
6.3-16.0
18.0-28.0
6.3-16.0
18.0-28.0
6.3-28.0
6.3-16.0
18.0-28.0
6.3-28.0
6.3-16.0
18.0-28.0
5.00-22.4
5.60-25.0
Triple Reduction
FA
FB
FC
FD
FE
FF
FG
17.09
0.60
6.28
11.57
9.57
3.66
5.71
6.86
18.98
0.59
7.26
12.20
4.29
6.24
21.54
0.67
7.85
12.76
4.85
7.11
22.72
0.67
8.54
13.46
6.02
7.99
25.51
0.67
8.74
14.69
6.81
8.98
27.09
0.67
9.76
16.30
8.94
11.97
30.20
0.67
11.22
17.83
10.16
13.78
36.10
36.10
0.67
0.67
12.36
12.36
19.33
19.33
9.96
10.94
14.17
15.16
2.92
1.21
2.51
1.34
2.63
1.84
2.03
3.11
1.93
3.15
3.86
2.68
3.30
3.30
DRIVE
Ratios
SIZE
M1130 31.5-140.0
M1140 31.5-140.0
31.5-90.0
M1150 100.0-140.0
M1160 31.5-140.0
M1170 31.5-140.0
M1180 31.5-140.0
M1190 31.5-140.0
M1200 25.0-112.0
M1210 28.0-125.0
FA
FB
FC
FD
FE
FF
FG
17.09
18.98
0.60
0.59
6.28
7.26
9.57
10.98
3.66
4.29
6.86
7.29
21.54
0.67
7.85
11.57
4.85
8.16
22.72
25.51
27.09
30.20
36.10
36.10
0.67
0.67
0.67
0.67
0.67
0.67
8.54
8.74
9.76
10.83
12.36
12.36
13.46
14.69
15.39
17.32
19.17
19.17
6.02
6.81
8.94
10.16
8.98
10.94
7.99
8.98
12.76
14.76
12.20
14.17
1.21
0.92
1.84
1.56
1.33
1.93
1.85
2.12
2.13
2.13
++ Dimensions are for reference only and are subject to change without notice unless
certified.
Allows 0.12 clearance from shroud.
certified.
Allows 0.12 clearance from shroud.
(161-110) 173
FF
FE
FE
FF
OPTIONAL
2 SHAFT FANS
CONFIGURATION
FG
SHAFT EXTENSION
WITH SHAFT COVER
REMOVED
FB
FG
SHAFT EXTENSION
WITH SHAFT COVER
REMOVED
FB
FC
FC
FA
FD
FD
WITH SHAFT
COVER
DRIVE
SIZE
M1220
M1230
M1240
M1250
WITH SHAFT
COVER
Ratios
FA
FB
FC
FD
FE
FF
FG
5.6 - 22.4
6.3 - 25.0
5.6 - 22.4
6.3 - 25.0
37.20
37.20
43.90
43.90
0.78
0.78
0.59
0.59
16.81
16.81
19.25
19.25
28.07
28.07
30.47
30.47
13.58
15.16
16.34
18.31
16.02
17.60
21.34
23.31
5.98
5.98
7.01
7.01
For applications requiring a backstop and two shaft fans, consult the Factory.
174 (161-110)
FE
FE
FF
FF
OPTIONAL
2 SHAFT FANS
CONFIGURATION
FG
SHAFT EXTENSION
WITH SHAFT COVER
REMOVED
FB
FB
FC
FG
SHAFT EXTENSION
WITH SHAFT COVER
REMOVED
FC
FA
FD
WITH SHAFT
COVER
DRIVE
SIZE
M1220
M1230
M1240
M1250
FD
WITH SHAFT
COVER
Ratios
FA
FB
FC
FD
FE
FF
FG
25.0 - 63.0
28.0 - 71.0
25.0 - 63.0
28.0 - 71.0
37.20
37.20
43.90
43.90
4.72
4.72
3.35
3.35
16.61
16.61
18.39
18.39
25.08
25.08
26.85
26.85
15.16
16.73
17.91
19.88
29.17
30.75
35.87
37.83
4.84
4.84
6.60
6.60
(161-110) 175
Type DBC3 Sizes M1130-M1210
FC
FB
FA
FD
DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
11.2-100.0
12.5-112.0
FA
FB
14.09
7.045
17.09
8.545
16.85
8.425
18.19
9.095
18.39
9.195
22.20
11.10
22.32
11.16
29.22
29.22
14.61
14.61
FC
2.95
1.77
3.11
2.28
4.37
2.56
4.65
4.25
4.53
4.13
4.57
3.78
5.79
5.00
6.01
6.01
FD
16.54
18.43
20.87
21.89
24.80
26.30
29.45
35.28
35.28
++ Dimensions are for reference only and are subject to change without notice
unless certified.
176 (161-110)
FC
FB
FA
FD
DRIVE
SIZE
M1220
M1230
M1240
M1250
Ratios
FA
FB
FC
FD
8.0 - 63.0
9.0 - 71.0
8.0 - 63.0
9.0 - 71.0
34.84
34.84
38.39
38.39
17.42
17.42
19.19
19.19
7.40
7.40
7.40
7.40
36.22
36.22
42.91
42.91
(161-110) 177
Type DXC Triple Reduction
FE
W
FD
FC
QM
FB
L
QM
FA
EE
13.80
DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
11.2-100.0
12.5-112.0
FA
FB
12.95
7.05
14.92
8.03
16.10
8.62
17.44
9.29
17.68
9.41
20.55
11.10
22.13
11.89
24.53
24.53
13.11
13.11
FC
3.23
2.05
3.46
2.64
4.41
2.60
4.65
4.25
4.61
4.37
5.20
4.33
5.83
5.04
7.20
7.20
FD
FE
19.21
1.26
21.10
1.26
23.39
1.26
24.57
1.26
27.32
1.26
29.84
1.73
33.07
1.73
42.13
42.13
3.35
3.35
++ Dimensions are for reference only and are subject to change

without notice unless certified.
178 (161-110)
Type DHL1,
DHC1, 2 & 3 Sizes M1130-M1210
Electric Fan Clearance/Dimensions Inches
FA
FF
FD
FE
FB
FC
All Reductions & Ratios

DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
FA
FB
FC
FD
FE
FF
17.56
19.52
19.52
21.46
21.50
23.46
25.63
28.58
28.58
24.55
26.40
26.97
28.50
29.76
31.61
34.21
39.96
39.96
16.77
17.36
18.34
18.35
18.31
20.47
20.59
24.49
24.49
8.78
9.76
9.76
10.75
10.75
11.73
12.83
14.29
14.29
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
45.27
49.33
54.37
57.32
61.61
68.90
74.92
88.47
88.47
unless certified.
(161-110) 179
Type DHC2
& 3 Sizes M1220-M1250
FA
FD
FE
FF
FK
FB
FJ
FH
FC

DRIVE
SIZE
M1220
M1230
M1240
M1250
Ratios
FA
FB
FC
FD
5.6 - 63.0
6.3 - 71.0
5.6 - 63.0
6.3 - 71.0
36.10
36.10
39.65
39.65
42.91
42.91
49.61
49.61
20.79
20.79
20.99
20.99
18.05
18.05
19.82
19.82
FE
FF
FH
5.00 91.66 48.03

5.00 91.66 49.61
5.00 103.47 56.10
5.00 103.47 58.07
FJ
FK
22.83
21.26
26.38
24.41
68.83
70.40
77.10
79.06
unless certified.
180 (161-110)
Type DH
& DB All Reductions - Sizes M1130-M1210

FA
FF
FE
FD
FB
FC
DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
Ratios
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
14.0-80.0
90.0-125.0
11.2-100.0
12.5-112.0
FA
FB
FC
FD
FE
17.56
24.57
16.77
8.78
5.00
19.53
26.42
17.36
9.76
5.00
19.53
26.46
18.35
9.76
5.00
21.46
28.50
18.35
10.75
5.00
21.50
29.76
18.31
10.75
5.00
23.46
31.61
20.47
11.73
5.00
25.63
34.21
20.59
12.83
5.00
28.58
28.58
39.96
39.96
24.49
24.49
14.29
14.29
5.00
5.00
FF
55.24
54.06
59.69
58.86
65.20
63.39
69.88
69.49
72.91
72.68
81.50
80.71
87.52
86.73
103.23
103.23
unless certified.
(161-110) 181
FA
FF
FO
FD
FE
FK
FB
DRIVE
SIZE
M1220
M1230
M1240
M1250
FC
FJ
FH
Ratios
FA
FB
FC
FD
FE
FF
FH
FJ
FK
FO
8.0 - 63.0
9.0 - 71.0
8.0 - 63.0
9.0 - 71.0
36.10
36.10
39.65
39.65
42.91
42.91
49.61
49.61
20.79
20.79
20.99
20.99
18.05
18.05
19.82
19.82
5.00
5.00
5.00
5.00
120.40
120.40
129.45
129.45
48.03
49.61
56.10
58.07
22.83
21.26
26.38
24.41
43.62
42.05
47.36
45.40
76.77
78.35
82.09
84.06
certified.
182 (161-110)
Type DHC
Electric Fan Clearance(Top Mounting)/Dimensions Inches
FE
FD
FA
FF
FJ
FK
FB
FC
FH

DRIVE
SIZE
M1220
M1230
M1240
M1250
Ratios
FA
FB
FC
FD
FE
FF
FH
FJ
FK
5.6 - 63.0
6.3 - 71.0
5.6 - 63.0
6.3 - 71.0
36.10
36.10
39.65
39.65
57.99
57.99
65.08
65.08
5.91
5.91
5.71
5.71
18.05
18.05
19.82
19.82
5.00
5.00
5.00
5.00
76.77
76.77
88.19
88.19
48.03
49.61
56.10
58.07
22.83
21.26
26.38
24.41
53.94
55.51
61.81
63.78
(161-110) 183
Type DVA
& DVC

FF
FD
FE
DVA
FB
FC
FA
FD
FE
DVC
FB
FC
FA

DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
Ratios
FA
FB
FC
FD
FE
FF
6.3-28.0
6.3-28.0
6.3-28.0
6.3-28.0
6.3-28.0
6.3-28.0
6.3-28.0
5.0-22.4
5.6-25.0
20.94
24.41
26.69
27.87
30.63
32.20
35.35
41.34
41.34
24.35
24.35
24.35
26.34
26.34
29.76
31.73
34.73
34.73
13.82
14.37
14.37
15.35
15.35
16.26
16.97
17.09
17.09
10.47
12.21
13.35
13.94
15.32
16.10
17.68
20.67
20.67
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
42.32
46.30
50.39
54.33
58.66
64.69
71.30
81.07
81.07
184 (161-110)
Type DXA
& DXC

FC
W
O
FD
FA
FB
FG
DXA
FF
QM
L
FE
FE
QM
EE
13.80
FA
FB
FG
DXC
FF
QM
QM
EE
13.80
Triple Reduction
DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
FA
FB
FC
FD
FE
FF
FG
20.94
24.41
26.69
27.87
30.63
32.20
35.35
41.34
41.34
5.59
9.57
13.62
15.04
19.06
21.06
24.25
31.61
31.61
29.72
33.70
37.76
41.14
45.16
50.63
55.79
66.14
66.14
10.47
12.21
13.35
13.94
15.32
16.10
17.68
20.67
20.67
2.80
5.12
5.12
6.18
5.91
6.97
7.01
9.65
9.65
26.81
29.33
30.51
32.68
32.87
36.14
38.94
42.09
42.09
8.62
7.99
7.99
7.80
7.80
7.80
8.74
8.74
8.74
(161-110) 185
Type DHC1
Cooling Tube Clearance/Dimensions Inches

WATER IN
WATER OUT
AJ
AF
AH
AG
AK
AL
AX
CLEARANCE
FOR TUBE
REMOVAL
WATER OUTLET
.500-14 NPT
HIGH
SPEED
END OF
DRIVE
1.25
0.60
WATER INLET
.500-14 NPT
A minimum flow rate of 2 gallons per minute of clean

water is required to prevent tube fouling. The
maximum flow rate to prevent tube erosion is 5 gallons
per minute. Thermal horsepower ratings are based on
a maximum water inlet temperature of 90F (32C) with
2 gallons per minute.
DRIVE
SIZE
Reduction
AF
AG
AH
AJ
AK
AL
AX
Std No.
of Tubes
M1150
M1160
M1170
M1180
M1190
1
1
1
1
1
2.91
3.15
3.15
3.15
3.15
3.03
3.23
3.54
3.94
4.33
7.13
7.56
7.01
8.15
10.51
3.03
3.23
3.54
4.33
4.33
5.51
5.51
5.51
6.30
4.72
5.51
5.51
5.51
6.30
4.72
44.9
47.9
52.2
59.1
61.7
4
4
4
4
6
++ Drawings are representative of this series of drives and do not agree in exact detail for all drive sizes. Dimensions are for reference only and are subject to change without notice
unless certified.
186 (161-110)
Type DH
& DB Sizes M1150-M1210
Type PA Pump and Cooler Clearance/Dimensions Inches

CB
CF
CA
CD
CC
CG
CH
FILTER MANUAL
BYPASS HANDLE
OPTIONAL FLOW
SWITCH
CE
OPTIONAL
FILTER
DRIVE SIZE
M1150
M1160
M1170
M1180
M1190
M1200
M1210
Pump & Cooler
CA
CB
CC
CD
CE
605PA
610PA
605PA
610PA
605PA
610PA
610PA
620PA
610PA
620PA
630PA
620PA
630PA
620PA
630PA
36.3
38.2
35.1
37.0
25.6
25.6
28.0
28.0
23.5
24.6
23.5
24.6
12.4
12.4
12.4
12.4
37.6
39.6
31.5
31.5
23.5
24.6
40.4
44.0
41.8
45.4
50.7
35.2
35.2
39.6
39.6
39.6
49.3
54.7
48.3
53.7
45.3
45.3
46.3
46.3
Optional Filter
CF
CG
CH
33.6
36.0
33.1
35.5
38.9
38.3
37.7
37.1
...
...
...
...
29.6
30.5
29.6
30.5
12.4
12.4
33.6
36.0
40.3
39.7
...
...
29.6
30.5
24.6
24.5
24.6
24.5
27.4
12.4
13.6
12.4
13.6
14.4
36.2
39.3
39.2
42.3
48.9
40.4
48.5
41.8
49.8
55.1
...
24.9
...
24.9
27.7
30.5
...
30.5
...
...
24.5
27.4
24.5
27.4
13.6
14.4
13.6
14.4
41.9
48.5
41.9
48.5
53.8
59.1
52.8
58.1
24.9
27.7
24.9
27.7
...
...
...
...
(161-110) 187
Type DH
& DB Sizes M1220-M1250
Type PA Pump and Cooler Clearance/Dimensions Inches

CB
CF
CA
CD
CG
CC
FILTER MANUAL
BYPASS HANDLE
OPTIONAL FLOW
SWITCH
CE
OPTIONAL
FILTER
DRIVE SIZE
M1220
M1230
M1240
M1250
188 (161-110)
Optional Filter
Pump & Cooler
CA
CB
CC
CD
CE
CF
CG
630PA
640PA
630PA
640PA
630PA
640PA
630PA
640PA
58.2
71.1
56.6
69.5
48.6
48.6
50.2
50.2
27.4
32.9
27.4
32.9
14.4
20.0
14.4
20.0
47.6
62.4
47.6
62.4
62.6
69.0
61.0
67.4
27.7
33.0
27.7
33.0
61.8
74.4
59.8
72.5
56.7
56.7
58.7
58.7
27.4
32.9
27.4
32.9
14.4
20.0
14.4
20.0
50.7
65.0
50.7
65.0
66.2
72.3
64.2
70.4
27.7
33.0
27.7
33.0
Type DHC1
Pump and Cooler Selections

Input
RPM
1750
1430
1170
Nominal
Ratio
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
1.25
1.40
1.60
1.80
2.00
2.24
2.50
2.80
3.15
3.55
4.00
4.50
5.00
5.60
M1150
M1160
CSO
CSO
REDUCER SIZE
M1170
CSO
M1180
...
...
CSO
610PA
605PA
CSO
CSO
630PA
610PA
605PA
M1190
...
...
620PA
610PA
610PA
620PA
...
CSO
610PA
CSO
610PA
605PA
605PA
CSO
620PA
610PA
610PA
CSO
630PA
620PA
CSO
610PA
CSO
CSO
610PA
605PA
605PA
CSO
620PA
610PA
610PA
CSO
630PA
620PA
++ Oil-to-Air Coolers - Reducer mounted.

Maximum ambient temperature = 120F. Minimum service factor = 1.25. Maximum altitude = 10,000 ft.
For input speeds below 1170 rpm, use 1170 rpm selection.
CSO = Consult Sale Office
(161-110) 189
Type DH2

Input
RPM
1750
1430
1170
Nominal
Ratio
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
5.00
5.60
6.30
7.10
8.00
9.00
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
M1150
...
...
M1160
...
...
M1170
...
...
M1180
...
...
M1190
...
...
620PA
REDUCER SIZE
M1200
630PA
630PA
M1220
...
640PA
M1230
...
...
M1240
...
CSO
640PA
640PA
M1250
...
...
CSO
640PA
605PA
605PA
610PA
620PA
610PA
...
...
...
...
...
...
...
...
...
...
620PA
620PA
...
...
630PA
630PA
620PA
...
...
630PA
630PA
...
...
...
640PA
...
...
...
640PA
630PA
630PA
...
...
...
640PA
...
...
...
640PA
605PA
605PA
...
...
...
...
610PA
...
...
610PA
...
...
620PA
...
...
620PA
...
...
630PA
620PA
...
...
...
...
...
630PA
...
...
...
640PA
630PA
...
...
...
630PA
...
...
...
640PA
640PA
605PA
605PA
620PA
610PA
610PA
620PA
620PA
630PA
630PA
630PA
630PA
...
...

No cooler selection required.
CSO = Consult Sale Office.
190 (161-110)
M1210
...
...
...
...
...
...
...
...
Type DB3

Input
RPM
1750
1430
1170
Nominal
Ratio
8.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
8.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
8.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
31.5
35.5
40.0
45.0
50.0
56.0
63.0
71.0
80.0
90.0
100
112
125
M1150
...
...
...
...
...
605PA
...
...
...
...
...
605PA
M1160
...
...
...
...
...
605PA
...
...
...
...
...
605PA
M1170
...
...
...
...
...
M1180
...
...
...
...
...
605PA
610PA
...
...
...
...
...
...
...
...
...
...
605PA
610PA
M1190
...
...
...
...
...
610PA
...
...
...
...
...
610PA
REDUCER SIZE
M1200
...
...
...
M1210
...
...
...
...
620PA
620PA
...
...
...
...
...
620PA
...
...
...
...
...
M1220
640PA
M1230
...
640PA
630PA
630PA
...
...
...
...
...
...
...
...
...
...
...
...
M1240
640PA
630PA
...
...
...
...
...
...
640PA
...
...
...
...
...
605PA
...
...
...
...
...
605PA
...
...
...
...
...
605PA
...
...
...
...
...
610PA
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
640PA
...
...
...
...
...
...
...
...
...
...
...
...
630PA
...
...
...
...
...
...
640PA
640PA
630PA
630PA
620PA
630PA
630PA
...
...

No cooler selection required.
630PA
630PA
620PA
620PA
610PA
640PA
630PA
630PA
...
...
...
...
...
M1250
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...

...
...
...
...
...
(161-110) 191
Type DH,
DB & DZ Sizes M1130-M1210
Backstop Clearance/Dimensions Inches
NOTE: Check for backstop interference

with couplings, sprockets, and sheaves.
NOTE: Drives with backstops must be
selected with a minimum service factor.
See Table 1A, Page 11.
MA
MC
MB

DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
Ratios
MA
MB
MC
6.30-140.0
6.30-140.0
6.30-140.0
6.30-140.0
6.30-140.0
6.30-140.0
6.30-140.0
5.0-112.0
5.6-125.0
9.09
10.51
10.47
11.81
11.54
13.23
14.76
19.49
19.49
5.12
5.22
6.00
6.50
7.09
8.07
8.66
8.86
9.84
1.97
2.07
2.66
2.95
3.35
3.74
4.33
4.13
4.13
192 (161-110)
Type DHC
Backstop Clearance/Dimensions Inches
DHC Backstop Position
NOTE: Check for backstop interference

with couplings, sprockets, and sheaves.
NOTE: Drives with backstops must be
selected with a minimum service factor.
See Table 1A, Page 11.
0015
0016
0025
0026
0156
0256
DBC Backstop Position
MA
0045
0046
0456
MC
MB

DRIVE
SIZE
M1220
M1230
M1240
M1250
Ratios
MA
MB
MC
5.6 - 63.0
6.3 - 71.0
5.6 - 63.0
6.3 - 71.0
23.66
23.66
26.18
26.18
25.47
27.05
26.77
28.74
6.99
6.99
6.89
6.89
(161-110) 193
Type DHT/DBT Double & Triple Reduction
Torque Arm Rod End Type (Adjustable)/Dimensions Inches
HA
4 SLOTS
HB WIDE
HJ
HG
HH
HK
DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
18.58
20.98
23.82
26.18
29.72
33.46
37.60
43.31
46.26
HA
Min
21.78
22.80
26.18
26.77
28.15
31.86
33.55
36.90
36.90
Max
23.66
24.68
27.40
27.99
29.37
33.46
35.15
38.50
38.50
HF
HE SLOT
LENGTH
HC
HE SLOT
LENGTH
HD
HB
HC
HD
HE
HF
HG
HH
HJ
HK
1.10
1.10
1.10
1.10
1.10
1.10
1.10
1.10
1.10
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
12.99
12.99
12.99
12.99
12.99
12.99
12.99
12.99
12.99
4.65
4.65
4.65
4.65
4.65
4.65
4.65
4.65
4.65
7.68
7.68
7.68
7.68
7.68
7.68
7.68
7.68
7.68
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
10.43
10.43
10.43
10.43
10.43
10.43
10.43
10.43
10.43
4.41
4.61
4.45
4.74
4.53
4.72
5.41
3.29
3.29
5.12
5.91
6.50
7.19
7.28
8.46
8.56
9.74
9.74
194 (161-110)
Type DH Double & Triple Reduction
H
HA
JA
Tie Rod Adjustable/Dimensions Inches
88 TO 92
30 M
AX
ED
EC
W
V DIA - 2 HOLES
FOR CLASS 8.8
BOLTS MIN
ED
EC
WB
WA
SIZES M1130-M1190
ANCHOR BRACKET
EB
EA
E
SIZES M1200-M1210
ANCHOR BRACKET
V DIA - 4 HOLES
FOR CLASS 8.8
BOLTS MIN
EB
EA
E
DRIVE
SIZE
EA
EB
EC
ED
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
8.69
8.69
9.69
9.69
11.69
11.69
11.69
11.50
11.50
6.50
6.50
7.00
7.00
8.62
8.62
8.62
8.50
8.50
3.25
3.25
3.50
3.50
4.31
4.31
4.31
4.25
4.25
2.63
2.63
3.12
3.12
3.50
3.50
3.50
4.25
4.25
1.00
1.00
1.12
1.12
1.25
1.25
1.25
1.25
1.25
HA
H
MIN
30.00
30.00
30.00
30.00
29.75
29.75
29.75
21.50
21.50
MAX
34.25
34.25
35.25
35.25
35.25
35.25
35.25
24.00
24.00
MIN
15.50
15.50
15.50
15.50
19.75
19.75
19.75
...
...
Each rod end may be cut off to minimum JA length. HA is total length with cut off rod ends.
3 MA
JA
MAX
20.25
20.25
20.75
20.75
25.25
25.25
25.25
...
...
STD
12.75
12.75
12.75
12.75
11.00
11.00
11.00
4.50
4.50
MIN
5.50
5.50
5.50
5.50
6.00
6.00
6.00
...
...
WA
WB
Wt-lb
0.88
0.88
1.12
1.12
1.38
1.38
1.38
1.31
1.31
3.31
3.31
3.94
3.94
4.44
4.44
4.44
8.50
8.50
...
...
...
...
...
...
...
5.51
5.51
...
...
...
...
...
...
...
2.76
2.76
40
40
59
60
87
97
100
230
230
(161-110) 195

C-Face Adapters/Dimensions Inches
BELL
HOUSING
REMOVALBLE
COVER PLATES
B
LIFTING
HOLE
MOTOR
NEMA C-FACE
IEC B14 OR B5
E
MB - MOTOR
REG DIA
LIFTING
HOLES
C
D
MOTOR
ADAPTER PLATE
MC - NO. OF HOLES
MD - TAP SIZE OR THRU
HOLE DIA
ME - HOLE DEPTH
MF - BOLT CIRCLE
MA
VARIES WITH MOTOR
SIZE & MANUFACTURER
TO LIFT ENTIRE ASSEMBLY-USE TWO HOLES AT LOW SPEED END OF DRIVE

ONE HOLE AT H.S. END OF DRIVE
AND ONE HOLE IN BELL HOUSING
Motor Coupling
DRIVE
SIZE
M1130
M1140
M1150
M1160
Motor
Frame
182TC, 184TC
213TC, 215TC
254TC, 256TC
284TC, 286TC
324TC, 326TC
364TC, 365TC
213TC, 215TC
254TC, 256TC
284TC, 286TC
324TC, 326TC
364TC, 365TC
404TC, 405TC
213TC, 215TC
254TC, 256TC
284TC, 286TC
324TC, 326TC
364TC, 365TC
404TC, 405TC
254TC, 256TC
284TC, 286TC
324TC, 326TC
364TC, 365TC
404TC, 405TC
DIMENSIONS - INCHES
Drive Reduction & Nominal Ratio

DH2
DH3
6.30-16.0 18.0-28.0 31.5-90.0 100 -140

...
...
10R35
10R35
...
...
20R35
...
20R35
20R35
20R10
20R35
...
30R10
30R35
...
40R10
40R10
...
...
10R35
20R35
...
...
20R35
...
20R35
30R35
...
30R35
...
40R10
40R35
...
40R10
40R10
...
...
...
10R35
...
...
20R10
20R35
...
...
20R10
20R10
...
30R35
30R10
...
40R10
40R10
40R10
...
40R10
40R10
...
...
...
...
20R35
20R35
...
...
30R35
...
...
40R10
...
40R10
40R10
...
40R10
6.10
14.35
6.59
13.19
8.15
16.30
7.09
16.79
7.28
14.57
9.09
18.19
7.68
16.57
7.87
15.75
10.24
20.47
8.37
17.50
8.37
16.73
10.83
21.65
Due to interference, motor flanges cannot be used on the same side of the housing as a backstop or shaft fan.
Shaft fan only - Mount shaft fan opposite motor flange side.
Backstop only - Mount backstop opposite motor flange side.
Backstop and fan - Mount backstop opposite motor flange side, use electric fan.
196 (161-110)
MA
15.08
15.08
15.08
16.65
16.65
16.65
17.52
17.52
17.52
19.00
19.00
19.00
17.3
17.3
17.3
18.79
19.72
19.72
18.23
18.71
19.33
19.33
20.28
MB
8.5 H7
8.5 H7
8.5 H7
10.5 H7
12.5 H7
12.5 H7
8.5 H7
8.5 H7
10.5 H7
12.5 H7
12.5 H7
12.5 H7
8.5 H7
8.5 H7
10.5 H7
12.5 H7
12.5 H7
12.5 H7
8.5 H7
10.5 H7
12.5 H7
12.5 H7
12.5 H7
MC
4
4
4
4
4
8
4
4
4
4
8
8
4
4
4
4
8
8
4
4
4
8
8
MD
0.5625
0.5625
0.5625
0.5625
0.6875
0.6875
0.5625
0.5625
0.5625
0.6875
0.6875
0.6875
0.5625
0.5625
0.5625
0.6875
0.6875
0.6875
0.5625
0.5625
0.6875
0.6875
0.6875
ME
Thru
Hole
Thru
Hole
Thru
Hole
Thru
Hole
MF
7.25
7.25
7.25
9
11
11
7.25
7.25
9
11
11
11
7.25
7.25
9
11
11
11
7.25
9
11
11
11
Type DB Triple Reduction
C-Face Adapters/Dimensions Inches
REMOVALBLE
COVER PLATES
B
BELL
HOUSING
LIFTING
HOLE
MOTOR
ADAPTER PLATE
MB - MOTOR
REG DIA
E
MOTOR
NEMA C-FACE
IEC B14 OR B5
LIFTING
HOLES
MC - NO. OF HOLES
MD - TAP SIZE OR THRU
HOLE DIA
ME - HOLE DEPTH
MF - BOLT CIRCLE
MA
VARIES WITH MOTOR
SIZE & MANUFACTURER
TO LIFT ENTIRE ASSEMBLY-USE TWO HOLES AT LOW SPEED END OF DRIVE

AND ONE HOLE IN BELL HOUSING
DRIVE
SIZE
M1130
M1140
M1150
M1160
Motor
Frame
213TC, 215TC
254TC, 256TC
284TC, 286TC
324TC, 326TC
213TC, 215TC
254TC, 256TC
284TC, 286TC
324TC, 326TC
364TC, 365TC
213TC, 215TC
254TC, 256TC
284TC, 286TC
324TC, 326TC
364TC, 365TC
404TC, 405TC
254TC, 256TC
284TC, 286TC
324TC, 326TC
364TC, 365TC
404TC, 405TC
Motor Coupling
Drive Nominal Ratio
14:1-80:1 90:1-125:1
10R10
10R35
20R10
20R10
20R10
20R35
30R10
30R10
20R10
20R10
20R10
30R10
40R10
20R10
20R35
20R10
20R35
20R10
20R35
30R10
30R35
40R10
40R35
40R10
40R10
20R10
20R10
30R10
40R10
40R10
Dimensions - Inches
A
20.16
33.44
6.59
13.19
8.15
16.30
22.68
37.09
7.28
14.57
9.09
18.19
25.59
40.45
7.87
15.75
10.24
20.47
27.95
44.92
8.37
16.73
10.83
21.65
Due to interference, motor flange cannot be used with a shaft fan. If cooling is required, use electric fan.
MA
34.17
34.17
35.75
35.75
37.81
37.81
37.81
39.29
39.29
41.18
41.18
41.18
42.67
43.60
43.60
45.65
46.13
46.76
46.76
47.70
MB
8.5 H7
8.5 H7
10.5 H7
12.5 H7
8.5 H7
8.5 H7
10.5 H7
12.5 H7
12.5 H7
8.5 H7
8.5 H7
10.5 H7
12.5 H7
12.5 H7
12.5 H7
8.5 H7
10.5 H7
12.5 H7
12.5 H7
12.5 H7
MC
4
4
4
4
4
4
4
4
8
4
4
4
4
8
8
4
4
4
8
8
MD
0.5625
0.5625
0.5625
0.6875
0.5625
0.5625
0.5625
0.6875
0.6875
0.5625
0.5625
0.5625
0.6875
0.6875
0.6875
0.5625
0.5625
0.6875
0.6875
0.6875
ME
Thru
Hole
Thru
Hole
Thru
Hole
Thru
Hole
MF
7.25
7.25
9
11
7.25
7.25
9
11
11
7.25
7.25
9
11
11
11
7.25
9
11
11
11
(161-110) 197
Type DHC Double & Triple Reduction

Motor Brackets/Dimensions Inches
MC
ME
MB
MD
DRIVE
SIZE
M1130
M1140
M1150
M1160
Motor
Frame
213T, 215T
254T, 256T
284T, 286T
324T, 326T
213T, 215T
254T, 256T
284T, 286T
324T, 326T
364T, 365T
213T, 215T
254T, 256T
284T, 286T
324T, 326T
364T, 365T
404T, 405T
254T, 256T
284T, 286T
324T, 326T
364T, 365T
404T, 405T
High Speed Coupling

Wrapflex
Steelflex
10R10
10R10
20R10
20R10
20R10
20R10
20R10
20R10
30R10
20R10
20R10
20R10
20R10
30R10
40R10
20R10
20R10
20R10
30R10
40R10
1040T10
1040T10
1050T10
1050T10
1050T10
1050T10
1050T10
1060T10
1060T10
1060T10
1060T10
1060T10
1060T10
1070T10
1080T10
1060T10
1060T10
1060T10
1070T10
1080T10
MBB
MA
8.67
8.67
8.67
8.63
8.67
8.67
8.67
8.63
9.94
8.67
8.67
8.67
8.63
9.94
11.39
8.67
8.67
8.63
9.94
11.39
MA
MB
0.78
0.78
0.78
0.78
1.72
1.72
1.72
1.72
0.61
2.87
2.87
2.87
2.87
0.53
1.07
3.46
3.46
3.46
1.12
0.48
MC
MD
ME
28.19
33.07
36.85
39.65
29.17
34.06
37.83
40.63
41.21
29.76
34.65
38.43
41.22
41.65
46.81
35.35
39.13
41.93
42.49
47.52
0.83
0.83
0.83
0.83
0.79
0.79
0.79
0.79
0.79
0.98
0.98
0.98
0.98
0.98
0.98
1.18
1.18
1.18
1.18
1.18
7.76
7.76
7.76
7.76
8.58
8.58
8.58
8.58
8.58
9.84
9.84
9.84
9.84
9.84
9.84
10.43
10.43
10.43
10.43
10.43
MBB
2.66
1.66
0.85
0.15
3.60
2.60
1.79
0.79
0.33
4.74
3.74
2.93
1.93
0.81
0.31
4.33
3.52
2.52
1.40
0.28
++ Dimensions are for reference only and are subject to change without notice unless certified. Available only for use with base-mounted drives; cannot be used with shaft-mounted
drives.
Due to interference, motor brackets cannot be used on the same side of the housing as a backstop or shaft fan.
Shaft fan only - Mount shaft fan opposite bracket side.
Backstop only - Mount backstop opposite bracket side.
Backstop and fan - Mount backstop opposite bracket side, use electric fan.
Brackets for NEMA motors are furnished slotted for motor mounting.
Negative MB and MBB dimensions indicate bracket extends below drive feet. Customer must provide clearance for bracket and for motor mounting hardware.
198 (161-110)
Type DBC Triple Reduction
Motor Brackets/Dimensions Inches
MA
WELDED
MOTOR
BRACKET
MA
BOLTED
MOTOR
BRACKET
MA
MA
MBB
MB
MF
MC
MD
DRIVE
SIZE
M1130
M1140
M1150
M1160
Motor
Frame
High Speed Coupling

Wrapflex
Steelflex
10R10
10R10
20R10
20R10
20R10
20R10
20R10
20R10
30R10
20R10
20R10
20R10
20R10
30R10
40R10
20R10
20R10
20R10
30R10
40R10
1040T10
1040T10
1050T10
1050T10
1050T10
1050T10
1050T10
1060T10
1060T10
1060T10
1060T10
1060T10
1060T10
1070T10
1080T10
1060T10
1060T10
1060T10
1070T10
1080T10
213T, 215T
254T, 256T
284T, 286T
324T, 326T
213T, 215T
254T, 256T
284T, 286T
324T, 326T
364T, 365T
213T, 215T
254T, 256T
284T, 286T
324T, 326T
364T, 365T
404T, 405T
254T, 256T
284T, 286T
324T, 326T
364T, 365T
404T, 405T
MA
8.67
8.67
8.67
8.63
8.67
8.67
8.67
8.63
9.94
8.67
8.67
8.67
8.63
9.94
11.39
8.67
8.67
8.63
9.94
11.39
MB
0.78
0.78
0.78
0.78
1.72
1.72
1.72
1.72
0.61
2.87
2.87
2.87
2.87
0.53
1.07
3.46
3.46
3.46
1.12
0.48
MC
MD
ME
MBB
25.62
30.52
34.32
37.12
26.41
31.31
35.11
37.91
38.46
26.80
31.70
35.50
38.30
38.90
43.90
33.27
37.07
39.87
40.39
45.42
45.78
50.68
54.48
57.28
49.08
53.98
57.78
60.58
61.12
52.39
57.29
61.09
63.89
64.49
69.49
61.23
65.03
67.83
68.34
73.38
1.29
1.29
1.29
1.29
1.69
1.69
1.69
1.69
1.69
2.56
2.56
2.56
2.56
2.56
2.56
2.36
2.36
2.36
2.36
2.36
2.66
1.66
0.85
0.15
3.60
2.60
1.79
0.79
0.33
4.74
3.74
2.93
1.93
0.81
0.31
4.33
3.52
2.52
1.40
0.28
++ Dimensions are for reference only and are subject to change without notice unless certified. Available only for use with base-mounted drives; cannot be used with shaft-mounted
drives.
NEMA 213T-326T frame brackets are bolted. NEMA 364T-405T frame brackets are welded.
All brackets are slotted.
Shaft driven fans are not available with scoop brackets. Use electric fan if cooling is required.
If a fluid coupling is required, use a swing base or bedplate.
Dimensions MB & MBB are to the bottom of the bracket base. Allow extra for motor hardware.
Negative values for MB & MBB indicates motor bracket extends below drive feet.
(161-110) 199
Type DBC Triple Reduction
Swing Base w/Fixed Length Torque Arm/Dimensions Inches

DRIVE DIMENSIONS - REFER TO PAGE 132
STANDARD ARRANGEMENTS AVAILABLE TO SUIT:
DBC Drives (Solid LS Shaft)
NEMA or IEC Motors to Limits Shown Below
Falk Steelflex (T10), Falk Wrapflex (R10), or Falk Fluid Couplings
Consult the Factory for Non-Standard Arrangements
SB7
M
F
SB9
SB6
4 HOLES
DRILL THRU
SB15 DIA
SB3
SB10
SB2
SB13
SB5
SB4
DRIVE
SIZE
M1220
M1230
M1240
M1250
SB8
SB14
R
SB11
SB2
SB3
SB4
SB5
SB6
SB7
SB8
SB9
SB10
SB11
SB13
SB14
SB15
1.57
1.57
1.57
1.57
9.45
9.45
9.45
9.45
11.81
11.81
11.81
11.81
49.37
49.37
54.92
54.92
31.10
31.10
35.24
35.24
24.02
22.44
27.56
25.59
30.08
30.08
35.63
35.63
4.72
4.72
4.72
4.72
7.09
7.09
7.09
7.09
1.10
1.10
1.10
1.10
Dimension varies with motor frame and coupling type.
Loads Generated /Torque Arm Forces, Shaft Forces & Motor Limits
DRIVE
SIZE
Maximum
Torque Arm
Force
M1220
M1230
M1240
M1250
Maximum Loads at
End of Shaft
Motor Limits at 1750 rpm
Radial Force
Bending Force
Maximum Power
Maximum Weight
R (lb)
F (lb)
M (lb-in)
Hp
lb
29,400
32,400
43,600
49,700
25,200
28,300
33,700
39,300
776,000
881,000
1,186,000
1,390,000
1,750
1,750
2,250
2,250
13,800
13,800
19,800
19,800
++ The loads generated are based on a combination of the most unfavorable conditions of rotation, speed, selection horsepower, motor weight, and a 200% start factor.
Values for R, F, and M are the maximum loads at the position shown during start-up. The loads may NOT be acting in the direction of the arrows. Use the worst case loading
condition when designing the driven equipment.
Refer to the Factory for larger motors or other input speeds.
200 (161-110)
Type DBT Triple Reduction
Swing Base w/Rod End Type (Adjustable) Torque Arm/Dimensions Inches

DRIVE DIMENSIONS - REFER TO PAGES 136 & 137
DBT Drives (with TA Bushing)
NEMA or IEC Motors to Limits Shown Below
Falk Steelflex (T10), Falk Wrapflex (R10), or Falk Fluid Couplings
Consult the Factory for Non-Standard Arrangements
SB13
SB10
SB15
MOTORPLATE
SB7
M
SB9
SB12
F
SB6
SB16
COUPLING
PLATE
SB1
4 SLOTS
SB19 WIDE
SB20
SLOT LENGTH
SB4
SB17
SB18
SB14
SB2
SB20 SLOT LENGTH

SB3
SB5
SB8
SB11
DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
SB1
Min
13.87
13.87
16.19
16.76
16.76
17.60
17.60
18.78
18.78
Max
14.43
14.43
16.75
17.32
17.32
18.50
18.50
19.40
19.40
SB2
SB3
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
SB4
SB5
SB6
Min
12.99 60.63
12.99 62.68
12.99 61.42
12.99 66.97
12.99 66.18 40.42
12.99 64.80 42.04
12.99 77.24 45.86
12.99 100.00 49.99
12.99 101.00 49.99
Max
40.98
42.94
46.76
50.61
50.61
SB7
SB8
SB9
SB10
SB11
SB12
SB13
SB14
SB15
SB16
SB17
SB18
SB19
SB20
9.51
10.50
10.94
11.92
11.81
13.19
14.09
12.81
12.81
14.65
12.17
10.24
18.52
15.55
12.99
25.43
18.10
17.13
10.43
10.43
10.43
10.43
10.43
10.43
10.43
10.43
10.43
8.35
9.29
10.43
11.02
11.81
13.19
14.76
18.70
17.72
6.00
6.00
6.00
10.00
10.00
10.00
12.00
12.00
12.00
7.28
7.28
7.28
9.25
9.25
9.25
11.22
11.22
11.22
7.68
7.68
7.68
7.68
7.68
7.68
7.68
7.68
7.68
1.10
1.10
1.10
1.10
1.10
1.10
1.10
1.10
1.10
4.65
4.65
4.65
4.65
4.65
4.65
4.65
4.65
4.65
23.66
24.44
28.26
31.21
31.21
44 Consult the Factory.
Loads Generated /Torque Arm Forces, Hollow Shaft Forces & Loads at the Bushing Nut Face
DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
Maximum Loads at Face of

Bushing Nut
Maximum
Torque Arm
Force
Radial Force
Bending Force
R (lb)
F (lb)
M (lb-in)
Frame
Weight (kg)
Frame
Weight (lb)
2,800
4,500
6,800
10,700
13,600
18,300
21,900
24,800
25,800
2,600
3,700
4,900
7,900
11,200
15,800
18,000
16,400
19,000
37,600
48,800
78,900
121,300
165,800
230,700
296,700
295,200
321,500
200L-225M
200L-280S
200L-280M
160M-280M
160L-315L
180M-315L
200M-355L
315S-400L
315S-400L
240-330
240-610
240-660
108-660
130-1200
165-1200
240-2000
830-3000
830-3000
324T-365T
324T-444T
324T-447T
254T-449T
284T-449T
286T-449T
324T-449T
404T-449T
404T-449T
565-875
565-1650
565-2000
250-2500
335-2500
410-2500
565-2300
1100-2300
1100-2300
IEC Motors
NEMA Motors
condition when designing the driven equipment.
Refer to the Factory for larger motors.
(161-110) 201
Motor Mounts - Top Mount/Dimensions Inches

360-440 FRAME MOTORS
ALL MOTOR FRAME SIZES

180-320 FRAME MOTORS
ADJUSTING SCREWS
FOR
TENSIONING BELT
C
E
F
A
140T - 250T
DRIVE
SIZE
M1130
M1140
Min
14.68
15.63
Max
18.18
19.13
M1150
M1160
M1170
M1180
M1190
16.77
17.36
18.74
15.98
18.70
20.27
20.86
22.24
19.48
22.20
280T - 400T
C
1.97
17.36
0.20
17.36
180T - 320T
2.60
21.22
3.03
21.42
2.95
21.65
3.94
22.83
3.86
20.87
Motor Mt
Wt-lb
11.26
10.28
13.54
13.03
13.19
13.19
10.43
68
68
Min
14.53
15.08
Max
18.03
18.58
64
68
77
62
62
16.61
17.20
18.58
19.37
20.94
20.11
20.70
22.08
22.87
24.44
Due to interferences, Rexnord cannot offer a drive with both shaft fan and backstop.
Shaft Fan Only - Mount shaft fan on bushing side.
Backstop Only - Mount backstop on bushing side.
Backstop and Fan - Mount backstop on bushing side, use electric fan.
DRIVE
SIZE
140T
M1130
M1140
M1150
M1160
M1170
M1180
M1190
4.02
5.00
...
...
...
...
...
180T
F
Min
18.31
19.13
...
...
...
...
...
Max
21.81
22.63
...
...
...
...
...
E
3.74
4.72
5.32
...
...
...
...
Max
22.79
23.62
24.92
...
...
...
...
250T
F
Min
20.04
20.87
22.16
22.80
...
...
...
2.99
3.98
4.57
5.26
...
...
...
1.97
25.59
0.20
25.59
360T - 440T
2.60
34.57
3.03
34.57
2.95
34.53
3.94
34.57
3.86
34.49
210T
F
Min
19.29
20.12
21.42
...
...
...
...
Max
23.54
24.37
25.66
26.30
...
...
...
Min
21.02
21.89
23.15
23.78
25.16
22.60
25.24
2.24
3.23
3.82
4.51
4.65
5.79
6.69
Motor Mt
Wt-lb
19.49
18.50
247
247
26.89
26.22
26.02
24.92
24.06
362
362
366
379
408
280T
F
Max
24.52
25.39
26.65
27.28
28.66
26.10
28.74
1.73
2.72
3.31
4.00
4.14
5.28
6.18
F
Min
21.61
22.09
23.90
24.53
25.90
23.31
25.98
Max
25.11
25.59
27.40
28.03
29.40
26.81
29.48
Due to interferences, Rexnord cannot offer a drive with both shaft fan and backstop.
Shaft Fan Only - Mount shaft fan on bushing side.
Backstop Only - Mount backstop on bushing side.
Backstop and Fan - Mount backstop on bushing side, use electric fan.
Minimum center distance does not include belt installation allowance. When determining belt length for minimum shaft centers, follow manufacturers installation allowance
recommendations and also provide for future belt tensioning.
E is the distance from the centerline of the housing to the motor front mounting hole.
DRIVE
SIZE
320T
M1130
M1140
M1150
M1160
M1170
M1180
M1190
1.26
2.24
2.82
3.51
6.65
4.80
5.67
See footnotes above.

202 (161-110)
360T
F
Min
22.60
23.07
24.88
25.51
26.89
24.29
26.97
Max
26.10
26.57
28.38
29.01
30.39
27.79
30.47
E
0.63
1.69
2.20
2.89
3.02
4.17
5.04
400T
F
Min
23.62
24.09
25.75
26.38
27.72
28.66
30.20
Max
27.12
27.59
29.25
29.88
31.22
32.16
33.70
E
0.12
1.10
1.44
2.13
2.27
3.43
4.29
440T
F
Min
24.61
25.08
26.73
27.36
28.74
29.65
31.18
Max
28.11
28.58
30.23
30.86
32.24
33.15
34.68
E
...
...
0.57
1.26
1.40
2.52
3.43
F
Min
...
...
27.72
28.35
29.72
30.63
32.17
Max
...
...
31.22
31.85
33.22
34.13
35.67
Type 2000
MCF Couplings
Flange Connection/Dimensions Inches

GAP
C
A
C
D
DRIVING HUB
(TYPE 2)
DRIVE Coupling
SIZE
Size
M1130 2130MCF
M1140 2140MCF
M1150 2150MCF
M1160 2160MCF
M1170 2170MCF
M1180 2180MCF
M1190 2190MCF
M1200 2200MCF
M1210 2210MCF
M1220 2220MCF
M1230 2230MCF
M1240 2240MCF
M1250 2250MCF
DRIVEN HUB
(TYPE 2)
Hub Type
Driving Hub
Driven Hub
Hydraulic
Hydraulic
Type
Removal
Type
Removal
Port Size BSPP
Port Size BSPP
2
...
2
...
2
...
6
0.125-28
6
0.125-28
2
...
6
0.125-28
6
0.125-28
2
...
2
...
2
...
6
0.125-28
6
0.125-28
2
...
6
0.125-28
6
0.125-28
2
...
2
...
2
...
6
0.125-28
6
0.125-28
2
...
6
0.125-28
6
0.125-28
2
...
2
...
2
...
6
0.125-28
6
0.125-28
2
...
6
0.125-28
6
0.125-28
2
...
2
...
2
...
6
0.250-19
6
0.250-19
2
...
6
0.250-19
6
0.250-19
2
...
2
...
2
...
6
0.250-19
6
0.250-19
2
...
6
0.250-19
6
0.250-19
2
...
2
...
2
...
6
0.250-19
6
0.250-19
2
...
6
0.250-19
6
0.250-19
2
...
2
...
2
...
6
0.250-19
6
0.250-19
2
...
6
0.250-19
6
0.250-19
2
...
2
...
2
...
6
0.250-19
6
0.250-19
2
...
6
0.250-19
6
0.250-19
2
...
2
...
0.750-14
2
...
6
6
0.750-14
2
...
6
0.750-14
6
0.750-14
2
...
2
...
2
...
6
0.750-14
6
0.750-14
2
...
6
0.750-14
6
0.750-14
2
...
2
...
2
...
6
0.750-14
6
0.750-14
2
...
6
0.750-14
6
0.750-14
2
...
2
...
2
...
6
0.750-14
6
0.750-14
2
...
6
0.750-14
6
0.750-14
Fit
Keyed
Keyed
3.5433 Keyless
Keyless
Keyed
Keyed
4.3307 Keyless
Keyless
Keyed
Keyed
4.7244 Keyless
Keyless
Keyed
Keyed
5.1181 Keyless
Keyless
Keyed
Keyed
5.1181 Keyless
Keyless
Keyed
Keyed
5.9055 Keyless
Keyless
Keyed
Keyed
6.6929 Keyless
Keyless
Keyed
Keyed
7.4803 Keyless
Keyless
Keyed
Keyed
7.8740 Keyless
Keyless
Keyed
Keyed
8.6614 Keyless
Keyless
Keyed
Keyed
8.6614 Keyless
Keyless
Keyed
Keyed
9.8425 Keyless
Keyless
Keyed
Keyed
9.8425 Keyless
Keyless
Bore
Range
Fit
Keyed
Keyless
3.00-4.50 Keyed
Keyless
Keyed
Keyless
4.00-5.00 Keyed
Keyless
Keyed
Keyless
4.50-5.50 Keyed
Keyless
Keyed
Keyless
5.00-6.50 Keyed
Keyless
Keyed
Keyless
5.00-7.50 Keyed
Keyless
Keyed
Keyless
5.50-8.00 Keyed
Keyless
Keyed
Keyless
6.50-9.00 Keyed
Keyless
Keyed
Keyless
7.00-9.50 Keyed
Keyless
Keyed
Keyless
7.50-10.00 Keyed
Keyless
Keyed
Keyless
8.50-12.00 Keyed
Keyless
Keyed
Keyless
8.50-13.00 Keyed
Keyless
Keyed
Keyless
9.50-14.00 Keyed
Keyless
Keyed
9.50-15.00 Keyless
Keyed
Keyless
DRIVEN HUB
(TYPE 2)
C
D
H
B
DRIVING HUB
(TYPE 6)
Minimum/Maximum Bore
Driving Hub
Driven Hub
DRIVEN HUB
(TYPE 6)
Bore
C
D
GAP HYDRAULIC
REMOVAL PORT
HYDRAULIC
REMOVAL PORT
H
B
DRIVING HUB
(TYPE 2)
GAP
H
B
HYDRAULIC
REMOVAL
PORT
C
A
HYDRAULIC
REMOVAL
PORT
GAP
Q
H
B
DRIVING HUB
(TYPE 6)
DRIVEN HUB
(TYPE 6)
Cplg
Wt
lb
Gap
131
12.50
9.12
4.50
7.00
2.50
4.81
4.31
0.12
169
13.25
11.12
5.50
7.75
2.76
5.81
5.31
0.12
246
14.62
12.12
6.00
8.62
3.76
6.62
5.50
0.12
343
16.25
13.12
6.50
10.00
4.00
7.12
6.00
0.12
496
18.00
14.88
7.38
11.62
4.00
8.00
6.88
0.12
604
19.12
14.88
7.38
12.88
4.50
8.00
6.88
0.12
803
21.12
17.62
8.75
13.88
4.76
9.37
8.25
0.12
946
22.00
19.12
9.50
14.75
5.00
10.12
9.00
0.12
1207
23.50
21.36
10.62
15.50
6.00
11.24
10.12
0.12
1638
25.88
24.12
12.00
17.38
6.54
12.62
11.50
0.12
2232
28.75
27.12
13.50
18.75
6.76
14.12
13.00
0.12
2647
30.25
28.62
14.25
20.25
7.24
14.87
13.75
0.12
3337
32.00
30.12
15.00
22.25
7.50
15.62
14.50
0.12
Refer to Factory for all applications above 100 rpm. Dimensions are for reference only and are subject to change without notice unless certified.
Coupling weights are for hubs with rough bores.
(161-110) 203
Type DBC/DBT Triple Reduction

Alignment Free Drive/Dimensions Inches
DRIVE DIMENSIONS - REFER TO PAGES 130-132 & 136-137

DBC or DBT Drives, Nominal Ratios 14:1 through50:1
NEMA TD Flange, NEMA TC C-FACE or IEC B5 Flange Motors as Shown Below
Falk True Torque Fluid (HFDD-20 or 28) Couplings
Also Falk Lifelign (G52 Floating Shaft), Steelflex (T50 Floating Shaft),
and Thomas (SN Floating Shaft) Couplings
Consult the Factory for Non-Standard Arrangements and
Non-Falk Branded Couplings
MA
A
B
4 - SLOTS FOR
LIFTING DRIVE
(MOTOR END
ONLY)
C
MB - MOTOR
REGISTER
MC - NO. OF HOLES
MD - DIA TAPPED
ME - DEPTH
MF - BOLT CIRCLE
PB
PB
ADJUSTABLE POSITION
OF TORQUE ARM
4 - SLOTS
PF WIDE
ALTERNATE
INSPECTION
COVER
PC
PD - SLOT
LENGTH
PD - SLOT
LENGTH
PA
PE
SOLID LOW SPEED SHAFT, DBC

K
HOLLOW LOW SPEED SHAFT, DBT
PH
PG
PH
PG
PJ
PJ
Loads Generated /Torque Arm Forces, Low Speed Shaft Forces

Max Loads at FRace of
Bushing Nut, DBT
Max Loads at End of

Shaft, DBC
DRIVE
SIZE
Max
Torque Arm
Force
R (lb)
Radial Force
F (lb)
Bending Moment
M (in-lb)
Radial Force
F (lb)
Bending Moment
M (in-lb)
NEMA
IEC
Siemens
Brook &
Crompton
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
M1220
M1230
5950
8700
10000
15500
20500
21000
26800
27000
28300
31500
3100
4050
6200
8850
10800
13600
20000
20100
...
...
46000
83200
100300
180300
272500
283000
355800
354000
...
...
3200
4200
6300
8900
10800
13700
20400
20500
25200
28600
50100
94300
118000
202000
296000
313300
431500
427500
689000
778000
364T - 445T
364T - 447T
365T - 449T
365T - 449T
404T - 449T
404T - 449T
444T - 449T
444T - 449T
447T - 449T
447T - 449T
225S - 280S
225S - 280S
225M - 315L
225M - 355S
250M - 355L
280S - 355L
280M - 355L
280M - 355L
315S - 355L
315S - 355L
...
...
...
5011, 588
5011, 588, 5810
5011, 588, 5810
5011, 588, 5810
5011, 588, 5810
5011, 588, 5810
5011, 588, 5810
...
...
...
585, 586, 587SDZ
585, 586, 587SDZ
585, 586, 587SDZ
585, 586, 587SDZ
585, 586, 587SDZ
585, 586, 587SDZ
585, 586, 587SDZ
Available Motors to Suit Adapter
condition when designing the driven equipment. Bending Moment is for torque arm located furthest from driven equipment.
Sizes M1220 & M1230 are not available as DBT.
204 (161-110)
Type DBC/DBT Triple Reduction

Alignment Free Drive/Dimensions Inches
Fluid Coupling
P
COUPLING
SIZE
DRIVE
SIZE
1420HFDD
1480HFDD
1584HFDD
1584HFDD
1660HFDD
1660HFDD
M1140-M1190
M1150-M1210
M1170-M1210
M1220-M1230
M1180-M1210
M1220-M1230
24.02
26.38
31.10
35.04
35.04
35.04
12.01
13.19
15.55
17.52
17.52
17.52
26.77
31.89
31.89
35.83
35.83
35.83
13.39
15.94
15.94
17.91
17.91
17.91
Min
20.67
21.57
24.53
26.50
26.50
26.50
Max
21.65
22.56
25.43
27.40
27.40
27.40
PB
PC
PD
PE
PF
PH
PG
PJ
6.38
7.56
9.02
10.94
10.94
10.94
0.63
0.63
0.63
0.63
0.63
0.63
4.65
4.65
4.65
4.65
4.65
4.65
12.99
12.99
12.99
12.99
12.99
12.99
1.10
1.10
1.10
1.10
1.10
1.10
1.38
1.38
1.38
1.38
1.38
1.38
7.68
7.68
7.68
7.68
7.68
7.68
10.43
10.43
10.43
10.43
10.43
10.43
++ Drawings are representative of this series of drives and do not agree in exact detail for all sizes. Gear drives are for horizontal shaft mounted operation unless specifically stated
otherwise. Consult Factory for other mountings. Dimensions are for reference only and are subject to change without notice unless certified.
44 Fluid coupling size selected based on motor power.
DRIVE
SIZE
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
M1220
M1230
Motor Adapter
E
22.68
25.59
27.95
31.50
35.24
39.57
45.28
46.26
48.23
49.80
9.29
10.43
11.02
12.40
13.19
14.76
17.72
17.72
18.31
18.31
7.09
7.68
8.37
8.46
9.65
10.43
11.61
11.61
15.94
15.94
10.51
10.94
11.93
11.81
13.19
13.98
13.03
13.03
...
...
13.98
14.69
16.61
16.93
17.91
20.28
23.03
23.03
31.10
31.10
PA - HS Coupling Size and Type
MA
MB
MC
MD
ME
MF
8
8
8
8
8
8
8
8
1420HFDD
1480HFDD
1584HFDD
1660HFDD
Type 20 Type 28 Type 20 Type 28 Type 20 Type 28 Type 20 Type 28

49.80
50.04
...
...
...
...
...
...
53.19
53.43
54.88
55.20
...
...
...
...
57.24
57.48
58.94
59.25
...
...
...
...
59.57
59.80
61.26
61.57
63.19
63.74
--...
64.61
64.84
66.30
66.61
68.23
68.78
67.05
67.05
68.94
69.17
70.63
70.94
72.56
73.11
71.38
71.38
...
...
78.43
78.74
80.35
80.91
79.17
79.17
...
...
79.41
79.72
81.34
81.89
80.16
80.16
...
...
...
...
96.97
97.52 100.12 100.12
...
...
...
...
98.54
99.09 101.69 101.69
Dimensions vary with motor selections. Certified prints will be provided after receipt or order.
MA dimension typically varies from 200% to 250% of E dimension.
VFD Close Coupled Coupling

DRIVE Motor
SIZE Frame
M1140
M1150
M1160
All
All
All
M1170
M1180
M1190
M1200
M1210
M1220
M1230
All
All
All
All
24.02
24.02
24.02
24.02
31.10
24.02
31.10
24.02
31.10
31.10
31.10
35.04
35.04
12.01
12.01
12.01
12.01
15.55
12.01
15.55
12.01
15.55
15.55
15.55
17.52
17.52
26.77
26.77
26.77
26.77
31.89
26.77
31.89
26.77
31.89
31.89
31.89
35.83
35.83
13.39
13.39
13.39
13.39
15.94
13.39
15.94
13.39
15.94
15.94
15.94
17.91
17.91
P
Min
20.67
20.67
20.67
20.67
24.53
20.67
24.53
20.67
24.53
24.53
24.53
26.50
26.50
Max
21.65
21.65
21.65
21.65
25.43
21.65
25.43
21.65
25.43
25.43
25.43
27.40
27.40
PA
PB
PC
PD
PE
PF
PH
PG
PJ
49.80
53.19
57.24
59.57
63.19
64.61
68.23
68.94
72.56
80.35
81.34
96.97
98.54
6.38
6.38
6.38
6.38
9.02
6.38
9.02
6.38
9.02
9.02
9.02
10.94
10.94
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
4.65
4.65
4.65
4.65
4.65
4.65
4.65
4.65
4.65
4.65
4.65
4.65
4.65
12.99
12.99
12.99
12.99
12.99
12.99
12.99
12.99
12.99
12.99
12.99
12.99
12.99
1.10
1.10
1.10
1.10
1.10
1.10
1.10
1.10
1.10
1.10
1.10
1.10
1.10
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
7.68
7.68
7.68
7.68
7.68
7.68
7.68
7.68
7.68
7.68
7.68
7.68
7.68
10.43
10.43
10.43
10.43
10.43
10.43
10.43
10.43
10.43
10.43
10.43
10.43
10.43
NEMA 449T (up to and including 300 hp) or IEC 280M and smaller motors.
NEMA 449T (larger than 300 hp) or IEC 315S and larger motors.
Motor Adapter
MA
MB
MC
MD
ME
MF
22.68 9.29 7.09 10.51 13.98

25.59 10.43 7.68 10.94 14.69
27.95 11.02 8.37 11.93 16.61
31.50 12.40 8.46 11.81 16.93
35.24 13.19 9.65 13.19 17.91
39.57 14.76 10.43 13.98 20.28
45.28
46.26
48.23
49.80
8
8
8
8
17.72
17.72
18.31
18.31
11.61 13.03 23.03

11.61 13.03 23.03
15.94 . . . 31.10
15.94 . . . 31.10
(161-110) 205
Type DH
& DB Double & Triple Reduction
Shaft Cover/Dimensions Inches
XX
XX
XA
XA
YA
YY
DHC2 & DHC3

DBC3
Shaft Cover Dimensions for DHC2

DRIVE
SIZE
1220
1230
1240
1250
Shaft Cover Dimensions for DBC3
Ratios
YA
YY
XA
XX
5.6-22.4
6.3-25.0
5.6-22.4
6.3-25.0
5.47
5.47
5.98
5.98
27.36
27.36
30.61
30.61
11.18
11.18
11.57
11.57
31.57
31.57
35.71
35.71
certified.
DRIVE
SIZE
1220
1230
1240
1250
Ratios
XA
XX
8.0-63.0
9.0-71.0
8.0-63.0
9.0-71.0
11.18
11.18
11.57
11.57
31.57
31.57
35.71
35.71
certified.
Shaft Cover Dimensions for DHC3

DRIVE
SIZE
1220
1230
1240
1250
Ratios
YA
YY
XA
XX
25.0-63.0
28.0-71.0
25.0-63.0
28.0-71.0
3.66
3.66
4.53
4.53
24.09
24.09
27.05
27.05
11.18
11.18
11.57
11.57
31.57
31.57
35.71
35.71
certified.
206 (161-110)
Optional Oil Sight Gauge/Dimensions Inches
DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
HA
H
LB
LB
HA
NPT
4.98
5.96
4.56
4.58
4.85
4.89
5.10
13.21
13.61
14.16
14.16
14.80
14.80
15.80
14.43
16.01
18.29
19.47
22.23
23.80
26.96
3/4
3/4
3/4
3/4
1
1
1
NPT
Optional Oil Drain Valve & Oil Sight Gauge/Dimensions Inches
HA
H
LB
LA
DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
LA
LB
HA
NPT
10.29
10.10
10.25
10.27
10.32
10.36
10.57
8.22
8.02
8.18
8.20
8.25
8.29
8.50
13.21
13.61
14.16
14.16
14.80
14.80
15.80
14.43
16.01
18.29
19.47
22.23
23.80
26.96
3/4
3/4
3/4
3/4
3/4
3/4
3/4
NPT
(161-110) 207
Type DH
Optional Oil Drain Valve/Dimensions Inches
DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
M1220
M1230
M1240
M1250
NPT
Type DH
LA
LA
NPT
3.74
3.74
3.74
3.74
4.13
4.13
3.39
2.80
2.80
3.62
3.62
3.74
3.74
6.54
6.54
6.50
6.50
6.89
6.89
6.10
5.55
5.55
6.50
6.50
6.61
6.61
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1 1/4
1 1/4
1 1/4
1 1/4
LB
H
Max
11.46
11.85
14.84
14.84
14.92
15.79
16.81
19.76
19.76
19.88
19.88
23.03
23.03
NPT
Optional Oil Sight Gauge/Dimensions Inches
DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
M1220
M1230
M1240
M1250
NPT
LB
Type DH
3.58
3.35
4.02
4.02
4.41
3.82
4.06
3.94
3.94
3.07
3.07
3.46
3.46
3/4
3/4
3/4
3/4
1
1
1
3/4
3/4
1 1/4
1 1/4
1 1/4
1 1/4
Optional Oil Drain Value & Oil Sight Gauge/Dimensions Inches
NPT
LB
208 (161-110)
LA
DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
M1220
M1230
M1240
M1250
LA
LB
10.08
10.08
10.48
10.48
11.26
10.71
10.12
9.53
9.53
10.16
10.16
10.47
10.47
7.28
7.09
7.72
7.72
8.50
7.95
7.40
6.73
6.73
7.32
7.32
7.72
7.72
H
Max
11.46
11.85
14.84
14.84
14.92
15.79
16.81
19.76
19.76
19.88
19.88
23.03
23.03
NPT
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1 1/4
1 1/4
1 1/4
1 1/4
Type DH
& DB
AirMax Breather/Dimensions Inches
AIRMAX
BREATHER
SEALED DIPSTICK
OPPOSITE SIDE
FROM LS GEAR
Single, Double & Triple Reduction

DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
0.8
0.6
0.6
0.6
0.6
0.6
0
0.6
0.6
6.1
5.9
5.3
4.9
6.5
6.5
6.5
6.1
6.1
certified.
Type DH
& DB
Approximate Oil Capacities For Standard Drives - Gallons

DRIVE
SIZE
M1130
M1140
M1150
M1160
M1170
M1180
M1190
M1200
M1210
DRIVE TYPE
DHC1
3.0
5.0
8.0
9.0
13.0
14.5
24.0
...
...
DHL1
4.0
6.0
9.0
11.0
15.5
18.5
30.0
48.0
...
DH2
3.5
5.0
8.0
10.0
13.5
15.5
25.0
43.0
42.0
DH3
3.5
5.5
8.5
10.5
14.0
16.0
25.5
43.0
42.0
++ Floor mount with input and output shafts on the same horizontal plane. Actual capacities may vary slightly with the ratio.
Oil capacities for Sizes M1220-M1250 vary with the ratio and input speed. Contact the Factory.
DBL2
4.0
6.0
9.0
11.0
17.5
21.5
29.0
46.5
...
DB3
3.5
5.0
8.0
10.0
13.5
15.5
25.0
41.5
40.5
(161-110) 209
Conversion Factors/U.S. Units to SI Metric Units

(Conversion values listed are for reference only. DO NOT use these
values to convert or compare inch and metric selection guides.)
DESCRIPTION
U.S. Units
Multiply by to Obtain
SI Metric Units
pound force (lbf)
4.448
newton (N)
inch (in)
25.4
millimeter (mm)
foot (ft)
0.3048
meter (m)
Mass
pound mass (lbm)
0.4536
kilogram (kg)
Power
horsepower (hp)
0.7457
kilowatt (kW)
Rotational Inertia
pound-inch2 (lb-in 2 )
0.0002926
kilogram-meter2 (kg-m 2 )
Rotational Speed
revolutions per minute (rpm)
1/min
C = (F-32)/1.8
pound-inch (lb-in)
0.113
newton-meter (Nm)
pound-foot (lb-ft)
1.356
newton-meter (Nm)
feet per minute (ft/min)
0.00508
meters per second (m/s)
miles per hour (mph)
1.609
kilometers per hour (km/h)
gallon (gal)
3.785
liter (L)
gallons per minute (gal/min)
0.06308
liters per second (L/s)
Force
Length
Temperature
Torque
Velocity
Volume
Volumetric Flow
Conversion Factors/SI Metric Units to U.S. Units

(Conversion values listed are for reference only. DO NOT use these
values to convert or compare inch and metric selection guides.)
DESCRIPTION
SI Metric Units
Multiply by to Obtain
U.S. Units
newton (N)
0.2248
pound force (lbf)
millimeter (mm)
0.03937
inch (in)
meter (m)
3.2808
foot (ft)
Mass
kilogram (kg)
2.2046
pound mass (lbm)
Power
kilowatt (kW)
1.341
horsepower (hp)
Rotational Inertia
kilogram-meter2 (kg-m 2 )
3417.6
pound-inch2 (lb-in 2 )
Rotational Speed
1/min
revolutions per minute (rpm)
F = 1.8(C ) + 32
newton-meter (Nm)
8.850
pound-inch (lb-in)
newton-meter (Nm)
0.7376
pound-foot (lb-ft)
meters per second(m/s)
196.85
feet per minute (ft/min)
kilometers per hour (km/h)
0.6124
miles per hour (mph)
liter (L)
0.2642
gallon (gal)
liters per second (L/s)
15.85
gallons per minute (gal/min)
Force
Length
Temperature
Torque
Velocity
Volume
Volumetric Flow
Equation:
Torque (Nm) =
59 50 x P Torque (lb - in) = 63,000 x P

n
n
Where: P = Power (kW); n = shaft speed (rpm)

210 (161-110)
World Class Customer Service

For more than 100 years, the dedicated people of Rexnord
have delivered excellence in quality and service to our
customers around the globe. Rexnord is a trusted name when
it comes to providing skillfully engineered products that
improve productivity and efficiency for industrial applications
worldwide. We are committed to exceeding customer
expectations in every area of our business: product design,
application engineering, operations, and customer service.
Because of our customer focus, we are able to thoroughly
understand the needs of your business and have the resources
available to work closely with you to reduce maintenance
costs, eliminate redundant inventories and prevent equipment
down time.
Rexnord represents the most comprehensive portfolio of power
transmission and conveying components in the world with the
brands you know and trust.
Rexnord, Drive One, Ultramite, Steelflex, TA Taper and Renew are registered trademarks of
Rexnord Industries, LLC. Falk is a trademark of Rexnord. All rights reserved.
WORLDWIDE CUSTOMER SERVICE

AUSTRALIA
Rexnord Australia Pty. Ltd.
Picton, New South Wales
Phone: 61-2-4677-3811
Fax: 61-2-4677-3812
CHINA
Rexnord China
Shanghai, China
Phone: 86-21-62701942
Fax: 86-21-62701943
Falk-Rexnord Australia Pty Ltd

Broadmeadow NSW Australia
Phone: 61-2-4962-8000
Fax: 61-2-4962-8001
EUROPE
Rexnord NV/SA
Mechelen, Belgium
Phone: 32-15-.443811
Fax: 32-15-443860
BRAZIL
Rexnord Correntes Ltda.
Sao Leopoldo - RS
Phone: 55-51-579-8022
Fax: 55-51-579-8029
Rexnord Kette GmbH

Betzdorf, Germany
Phone: 49-2741-2840
Fax: 49-2741-284-385
CANADA
Rexnord Canada Ltd.
Scarborough, Ontario
Phone: 1-416-297-6868
Fax: 1-416-297-6873
Rexnord Industries, LLC 3001 West Canal Street, Milwaukee, WI 53208-4200 USA
Phone: 414-342-3131Fax: 414-937-4359 Web: www.rexnord.com
2009 Rexnord Industries LLC
LATIN AMERICA
Rexnord International, Inc.
Milwaukee, Wisconsin
Phone: 1-414-643-2366
Fax: 1-414-643-3222
E-mail: [email protected]
MEXICO
Rexnord S A de C V
Mexico DF, Mexico
Phone: 52-55-9140-3500
Fax: 52-55-9140-3550
SINGAPORE
Rexnord International, Inc.
Singapore City, Singapore
Phone: 65-6338-5622
Fax: 65-6338-5422
UNITED STATES
Customer Service
Phone: 1-866-REXNORD
(1-866-739-6673)
E-mail: rexnord(state)@rexnord.com
Example: [email protected]
ALL COUNTRIES NOT LISTED
Rexnord International
Milwaukee, Wisconsin
Phone: 1-414-643-2366
Fax: 1-414-643-3222
E-mail: [email protected]
161-110 04/2009 Delzer Litho Printed in USA

161 110 Falk Drive One Gear Drives Catalog

Uploaded by

Copyright:

Available Formats

161 110 Falk Drive One Gear Drives Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

161 110 Falk Drive One Gear Drives Catalog

Uploaded by

Copyright:

Available Formats

What are some of the features and benefits of the Falk Drive One product family?

What are some of the features and benefits of the Falk Drive One product family?

What applications is the Falk Drive One suitable for?

What applications is the Falk Drive One suitable for?

FALK DRIVE ONE

ONE DRIVE FOR ONE WORLD

now more competitive than ever

ONE RELIABLE DRIVE

innovations derived from our experience with heavy

Falk Drive One Universal Series (Sizes 1130 1210)

with 18% higher ratings

Falk Drive One Conveyor Series (Sizes 1220 1250)

Falk Drive One High Torque Series (Sizes 1160 1210)

tandem lip seals

Standard accessories such as

ONE COMPLETE SOLUTION

Shaft Mounted Conveyor Drives

High Torque Planetary Drives

Pump & Paper

ONE QUICK DRIVE

Falk Drive One design streamlines the

Our commitment to speed includes the Quick

Quick Repair / Exchange

One Worry-Free Solution

Falk Drive One

Full 3-Year Warranty

Know-How & Customer Service

Distributor+ Added Value

Falk Drive One Selection Guide

Selection Guide 161-110, November 2009

Assemblies & Rotations . . . . . . . . . . . . . . . . . . . . . . . . . . 22-25 &153

Assemblies & Rotations . . . . . . . . . . . . . . . . . . . . . . . . 106-107 &158

Factory Warranty Were so confident in the performance and

Rexnord Industries, LLC, 2001, 2009.

People Conveying Equipment Selection of Rexnord gear drives

Conditions Affecting Selection

Application Adjusted Thermal Rating, Page 14, The

Mechanical Service Factor conversions

Table 1A Backstop Minimum Service Factor

Minimum Service Factor

Occasional and intermittent service or engine driven applications

Drawing Symbols The following symbols are used throughout

Rexnord Industries, LLC, 2001, 2009.

Mechanical Service Factors

for electric motor, steam turbine or hydraulic motor drives . . .

BOTTLING AND BREWING

for electric motor, steam turbine or hydraulic motor drives . . .

Mechanical Service Factors

See Mills. Rotary

See Mills. Rotary

PULLERS (Barge Haul) . . . . . 1.75 2.00

Rexnord Industries, LLC, 2001, 2009.

How to Select/ Formula Method

Power Selection Method

Torque Selection Method

Thermal Factors & Procedures

For the gear drive you have selected mechanically, choose an

Checking the thermal rating is extremely important. If the gear

TABLE 1 Ambient Temperature Factor B1

Thermal Rating Factors